process_electrodes_catalog
TRANSCRIPT
Welcome to Schott
pH measurement in the process application examples
Electrodes for process chemistry pH combination electrodes
metal combination electrodes
single electrodes pH glass, pNa, metal and reference elec., electrolyte bridges
resistance thermometers
grounding rod
conductivity cells
AquaLine electrodes in water economy
SteamLine electrodes in biotechnology
MultiSens electrodes
Oxygen electrodes
Accessories connection cables
other accessories
buffer, electrolyte and further solutions
Index type no. / order no.
page 6
page 8
page 34
page 36
page 40
page 50
page 52
page 60
Content
3
4
SCHOTT Instruments welcomes you!
Precise measuring during the process
with sensors from Schott.
Schott is the leading manufacturer of special glass
in Europe and is a leader worldwide. We offer tailor
made customer solutions for sophisticated glass
applications and systems in the household, health
sector and industrial fields. Production and market-
ing companies in all major regions represent us in
the vicinity of our customers.
Electrodes from own research, development
and manufacture
Schott has been active for more than 60 years in
the field of pH measuring. Schott, however, supplies
not only electrodes. Our sensors are tailored ac-
cording to the requirements of your applications and
are characterized by maximum quality, reliability
and a long life. These demands are met via close
cooperation with our customers (research, develop-
ment and manufacture) leading to tailor made,
technically detailed solutions. You will find a detailed
description of these precision sensors that have
been optimized according to process requirements
in this Catalogue.
Quality
The electrodes supplied by Schott are manufac-
tured with high precision according to the latest
manufacturing methods. Each electrode must meet
the strict requirements of the final examination.
Great variety of sensors
The electrochemical sensors from Schott cover
all applications for measurements in aqueous solu-
tions. They enable the determination of pH value,
redox potential, silver and halogenide ion activity,
dissolved oxygen, conductivity and temperature.
Operating ranges are from -30 °C up to +135 °C
and pressures up to 10 bar.
Sensors for various pH and
temperature ranges
Different application conditions require correspon-
dingly adjusted pH sensor. H Glass is utilised for
normal to high temperatures and the total pH ran-
ge (very small alkali errors), S Glass for hot lye,
L Glass for low temperatures, and A Glass is formu-
lated especially for the drinking water and sewage
range.
Shaft glasses with high chemical resistance, optimi-
zed to the application field of the sensor, are
important for the reliability of the electrode. Being
a manufacturer of special glass types, Schott pro-
duces these as a matter of course.
Certified safety for 10 bar and 135 °C
The HD electrodes of Schott ensure an examined
and certified pressure and temperature resistance
up to 10 bar and 135 °C. Thus they meet the
requirements of the chemical industry. We supply
these electrodes in normal batches with Works
Certificate 2.1 or against additional charge with
Acceptance Test Certificate 3.1 B.
AquaLine electrodes for the water industry
These electrodes are especially suitable for
measurements carried out in drinking water and
in the sewage sector. They quickly attain a stable
measuring value. Their smooth surface and sym-
metrical ring gap diaphragm are resistant to soiling
and ensure reliability coupled with a long life.
MultiSens
MultiSens electrodes enable the obtainment of
more information from a standard measuring point.
Measurement of pH, temperature, redox voltage
and conductivity can be made with a single electro-
de (in combination with a suitable measuring trans-
former), all of which can be done under process
conditions! Select the suitable MultiSens elctrode for
the parameters required by you. A double pH elec-
trode with temperature sensor can, for example,
automatically check the reliability of the pH measur-
ing point. This will reduce maintenance expenditure
and increase the measuring reliability without the
need to dismantle the sensor each time and without
having to employ buffer solution.
Recommended by international process
analytic experts:
SMEK plug system
5
pH Glasses
Schott electrodes are manufactured with different
pH glasses. These are optimized for their various
applications and offer a high measuring precision
and reliability.
Reference system
The Ag/AgCl system is suitable for all pH applicati-
ons up to temperature ranges of 135 °C. Silamid®,
developed by Schott, is increasingly used as a
novel reference system. Silamid®, in practical op-
eration, produces fewer measuring errors through
interference currents as well as more stable
measuring value display under critical conditions.
The reference electrolyte is a silver chloride-free
potassium chloride medium. Long diffusion stret-
ches in the electrodes make an additional heavy
metal such as silver ion blocking superfluous. This
means improved measuring function with environ-
mental protection under practical conditions.
Diaphragm
Also of decisive importance for the quality of the
measuring result is, in the case of combination
electrodes and reference electrodes, the diaphragm:
the platinum diaphragm ensures in a wide range
of applications an unsurpassable stable and rapid
measuring value adjustment. We offer, together
with additional diaphragm types, an optimum
solution for practically every possible measuring
medium.
Connection to electrodes
The Plug Head System (also called S7 or S8 respec-
tively) developed in 1972 is now well proven in
industry and has long been approved unofficially
as European standard. Schott has, with the coop-
eration of major electrode and pH meter manufac-
turers, developed the new 6-pin SMEK plug system
with unequivocal contact identification for sensors
that supply more than only the pH value. The
robust SMEK plug system meets the requirements
of the chemical industry and has been proven
many times under practical conditions.
Mounting possibilities
The electrodes and sensors of Schott are offered in
various designs that allow them to be mounted in
practically all the usual fastenings and probes. The
electrodes with screw plug head allow the plug
connection of cables of variable length and are
suitable for all fastening devices and probes with
mounting thread Pg 13.5. The electrodes with a
throated shaft can be installed by means of O-ring
and Pg 13.5 bolting. The electrodes with flanged
cap may be held by a union nut or mounted.
What to do with electrode waste?
Schott has accepted used sensors from their own
manufacture for many years and arranges proper
waste disposal or a reuse of materials.
Information and application
Do you have any questions about the use of
Schott electrodes? We will be glad to give you
advice on your application.
Wolfgang Knappek
SCHOTT Instruments GmbH
P.O. Box 2443
55014 Mainz
Hattenbergstraße 10
55122 Mainz
Germany
Phone: + 49 61 31/66-51 11
Fax: + 49 61 31/66-50 01
E-Mail: [email protected]
www.schottinstruments.com
6
Process electrodes are, in general, used in fixed
installed measuring points for continuous measur-
ing. The permanent availability of reliable and pre-
cisely measured values along with minimal main-
tenance expenditures are substantial requirements
regarding these measuring points.
This results in the question of which pH electrode
is most suitable for the measuring point con-
cerned? In answer, the electrodes can be subdi-
vided into the following groups:
Electrodes with liquid electrolyte
These are suitable for a higher temperature appli-
cation range and have a longer life than mainte-
nance limited electrodes. It is also possible to
expect a higher measuring accuracy, in particular
inthe case of electrodes with a platinumdiaphragm
and pressure application of the coating electrolyte.
The installation is more expensive than in the
case of electrodes with gel or polymer electrolyte.
Electrodes with polymer electrolyte (Referid ®)
These are low maintenance and are characterized
by high resistance to pressure and pressure
change. They are suitable for general applications
and also for taking measurements in sophisticated
chemical processes.
Electrodes with gel electrolyte
Require little maintenance and are favorable in
price. They are primarily used for standard appli-
cations in aqueous media.
Single electrodes
Used as separate glass and reference electrodes,
particularly in difficult conditions. With the addi-
tional use of an electrolyte bridge and pressure
application of the electrolyte it is possible to
achieve highly accurate measurements and long
electrode life even under extreme application
conditions.
Selection criteria for electrodes
The selection of a suitable pH electrode results
from the character of the process conditions.
Select a suitable electrode from the following
tables on the basis of the required pH and temper-
ature range as well as the pressure range. Know-
ledge of the conductivity or the salt content of the
measuring medium is helpful for selection.
Avoiding undesired influences on the
measuring process
Sometimes it is not possible to completely prevent
the soiling of the sensor through the measuring
medium. It is possible that a coating is formed or
the diaphragm is soiled. What is more, poisoning
of the reference electrode through agents from
the measuring medium (e.g. heavy metals, ammo-
nia, cyanide, sulphides) may occur. However, it is
possible to minimize these influences through
careful selection of the electrode, but they cannot
completely be prevented. A regular manual or
automatic maintenance process ensures reliable
measuring values in these cases.
When laying the cables for electrode connection,
splash water density is required for each connec-
tion. The connection at the measuring device
must be carried out in compliance with the
instructions of the manufacturer of that device.
In most cases, the measuring solution has been
already earthed on the process side. Measuring
points in solutions with little conductivity as well
as in glass or plastic fittings are earthed with
an earthing electrode integrated in the sensor or
by means of a separately grounding rod.
pH Glasses
Select the pH glass that offers the optimum
results:
H Glass: for high temperatures, in both the acid
and alkaline range, also for high sodium
ion concentrations
S Glass: in hot alkaline media with good
reproducibility and rapid reaction time
L Glass: for low temperatures and general
applications
A Glass: with fast reaction time in drinking water,
industrial water, sewage; for general
applications and in media with low ion
content
Diaphragm
Also decisive for a safe and reproducible pH meas-
uring activity is the correct selection of an elec-
trode type with a suitable diaphragm.
Platinum diaphragm:
Universal, showing its strength particularly in the
case of solutions with solid matter content and
extreme pH values and temperatures. High flow
resistance.
Ceramic diaphragm:
Robust for general applications, low electrolyte
outflow rate.
Ground diaphragm:
Preferred for liquids with high solid matter
content, easy to clean.
KPG®Ring Gap diaphragm:
Electrodes requiring little maintenance, symmetri-
cal ring gap, high resistance to soiling, extreme
pH values/temperatures can shorten life.
Hole diaphragm:
Electrodes requiring little maintenance, high resis-
tance to soiling, extreme pH values/temperatures
can shorten life.
Mounting dimensions
The dimensions can generally be adapted to the
existing measuring point. You will find a great
number of electrodes in the usual dimensions to
choose from.
Instructions on measuring pH during a process
7
The following electrode recommendations are
only mentioned as examples. Depending on
measuring point and measuring conditions, it is
quite possible that other electrodes may also
be suitable. We would be pleased to discuss these
items with you.
We reserve the right to introduce technical alterations.
Silamid, Referid, DURAN, KPG are registered trade marks of the SCHOTT Group, Mainz, Germany
Application examples
Application Recommended electrode (Page of Catalogue in brackets)
Sewage AquaLine electrode series (p. 34)
General, aqueous L 8281 HD (p.13)
AL 70 pH (p. 34)
H 6181 HD (p. 8)
Extreme conditions S 1181 HD (p. 16) + B 1981 HD (p.20)
S 6191 HD (p. 8)
Media containing hydrofluoric acid N 2981 (p. 16) + B 1881 (p. 20)
Sb 1101 (p. 18) + B 1881 (p. 20)
Boiler feeding water, condensate L 9080 (p.10)
H 9090 (p. 10)
Paper industry H 8281 HD (p. 13)
Sterilizable electrodes SteamLine (p. 36) + S 22120 (p. 38)
Media that are partly aqueous H 9180 (p. 10)
H 6191 HD (p. 8)
Low temperatures (-30 °C) L 9080 (p. 10)
L 9180 (p. 10)
L 9090 (p. 10)
Drinking water, industrial water L 9080 (p. 10)
AquaLine electrode series (p. 34)
Water, general AquaLine electrode series (p. 34)
Sugar industry S 6181 (p. 8)
9517/85 (p. 16) + 9801/85 (p. 20)
8
membrane glass H H H H H H H S
membrane resistance (25°C) [MΩ] 300 300 300 300 300 300 300 400
temperature range [°C] 0...135 0...135 0...135 0...135 0...135 0...135 0...135 10...135
pH range [°C] 0...14 0...14 0...14 0...14 0...14 0...14 0...14 2...14
pressure range p/∆p [bar] 10/3 6/3 6/3 6/3 10/3 6/3 6/3 10/3
length L [mm] 170 120 320 170 170 120 320 170
diaphragm ceramic
platinum
ground joint
certified press. and temp. consistency 1)
design corresponding illustration A A A B A A A A
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.
pH combination electrodes with liquid electrolyte and screw plug head
H 618
1 HD
H 628
1
H 638
1
H 648
1
H 619
1 HD
H 629
1
H 639
1
S 61
81 H
D
A H 6191 HDH 6181 HDH 6281H 6381H 6291H 6391S 6181 HDS 6281S 6381S 6191 HDS 6291S 6391L 6191
B H 6481S 6481
L
9
S S S S S S L
400 400 400 400 400 400 30
10...135 10...135 10...135 10...135 10...135 10...135 -30...+80
2...14 2...14 2...14 2...14 2...14 2...14 0...12
6/3 6/3 6/3 10/3 6/3 6/3 6/3
120 320 170 170 120 320 170
(triple)
A A B A A A A
S 62
81
S 63
81
S 64
81
S 61
91 H
D
S 62
91
S 63
91
L 61
91
pH combination electrodes with liquid
electrolyte and screw plug head
For high sophisticated pH measurements in
chemical processes.
Electrolyte:
3 mol/l KCl (Type L 300), refillable
except L 6191: low temperature electrolyte
type L 200
Zero point:
pH = 7.0
Shaft diameter:
12 mm
Connection:
screw plug head coaxial
with thread Pg 13.5
The use of these electrodes is chiefly intended in
combination with the miniature pressure probe
assembly 9921/51 HD and suitable pressure hose
type 9961/09. This assembly reduces the stated
installation length by 50 mm. The side support
with screw fitting serves for application of counter
pressure.
Supply:
HD version: HD sealing type 9980/51
standard: washer 9980/52,
O-ring type 9932/07
Connecting cable:
e.g. type 9902/05 (length 5 m with free end)
For additional connecting cables, see under
Accessories.
Note:
at temperatures above 100 °C sufficient over-
pressure must counteract the boiling of the
reference electrolyte, e.g. 3.2 bar at 135 °C.
10
membrane glass L L L H H H S
membrane resistance (25°C) [MΩ] 30 30 30 300 300 300 400
temperature range [°C] - 30...+80 -30...+80 -30...+80 0...135 0...135 0...135 10...135
pH range 0...12 0...12 0...12 0...14 0...14 0...14 2...14
pressure range p/∆p [bar] 6/3 6/3 6/3 6/3 6/3 6/3 6/3
length L [mm] 120 120 120 120 120 120 120
diaphragm ceramic (triple)
platinum
ground joint
design corresponding illustration A B A A B A A
pH combination electrodes with liquid electrolyte and hose olive
L 90
80
L 91
80
L 90
90
H 908
0
H 918
0
H 909
0
S 90
80
A L 9080L 9090H 9080H 9090S 9080S 9090
B H 9180L 9180S 9180
L
11
S S
400 400
10...135 10...135
2...14 2...14
6/3 6/3
120 120
B A
S 91
80
S 90
90
pH combination electrodes with liquid
electrolyte and hose olive
For high sophisticated pH measurements in
chemical processes.
Electrolyte:
3 mol/l KCl (type L 300), refillable – except
L 9080, L 9180, L 9090: low temperature
electrolyte type L 200
Zero point:
pH = 7.0
Shaft diameter:
12 mm
Connection:
plug head coaxial
Design:
refilling opening as hose olive
shaft constriction
Supply:
pressure screw type 9980/55 with thread Pg 13.5
washer 9980/52
O-ring type 9932/06
Connecting cable:
e.g. type 9902/05 (length 5 m with free end)
For additional connecting cables, see under
Accessories.
Note:
at temperatures above 100 °C sufficient overpres-
sure must counteract the boiling of the reference
electrolyte, e.g. 3.2 bar at 135 °C
The use of these electrodes is effected usually with
electrolyte reservoir (e.g. type 9955/00).
This vessel is connected by means of silicone tube
(e.g. type 9980/00) with the electrode.
12
membrane glass H H H S S S
membrane resistance (25°C) [MΩ] 300 300 300 400 400 400
temperature range [°C] 0...135 0...135 0...135 10...135 10...135 10...135
pH range 0...14 0...14 0...14 2...14 2...14 2...14
pressure range p/∆p [bar] 6/3 6/3 6/3 6/3 6/3 6/3
length L [mm] 120 120 120 120 120 120
diaphragm ceramic
platinum
ground joint
design corresponding illustration A B A A B A
pH combination electrodes with liquid electrolyte
9582
/85
9583
/85
9582
/95
9182
/85
9183
/85
9182
/95
pH combination electrodes with liquid
electrolyte
For high sophisticated pH measurements in
chemical processes. Specially for installation in
immersion probe assembly.
Electrolyte:
3 mol/l KCl (type L 300), refillable
Zero point:
pH = 7.0
Shaft diameter:
12 mm
Design:
refilling opening, double, at the side
shaft constriction and fixed cable 5 m
Note:
at temperatures above 100 °C sufficient overpres-
sure must counteract the boiling of the reference
electrolyte, e.g. 3.2 bar at 135 °C
A 9582/859582/959182/859182/95
B 9583/859183/85
L
13
membrane glass L L H H H H
membrane resistance (25°C) [MΩ] 30 50 400 400 400 400
temperature range [°C] - 5...+80 -5...+ 80 0...100 0...100 0...100 0...100
pH range 2...12 2...12 2...13 2...13 2...13 2...13
pressure range p/∆p [bar] 0,5 10 10 10 10 10
length L [mm] 120 120 170 120 360 225
electrolyte gel Referid® Referid® Referid® Referid® Referid®
diaphragm ceramic
KPG® annular gap
certified pressure and temperature consistency 1)
design corresponding illustration A B B B B B
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.
Low maintenance pH combination electrodes
L 77
81
L 82
81 H
D
H 818
1 HD
H 828
1 HD
H 838
1
H 848
1 HD
Low-maintenance pH combination
electrodes
For uncomplicated pH measurement in the water
industry and for process chemistry.
Electrolyte:
gel with visible KCl reserves, not refillable
Referid® (polymer with visible KCl reserves),
not refillable
Zero point:
pH = 7.0
Shaft diameter:
12 mm
Connection:
screw plug head coaxial with thread Pg 13.5
Supply:
HD version: HD sealing type 9980/51
standard: washer 9980/52, O-ring type 9932/07
Connecting cable:
e.g. type 9902/05 (length 5 m with free end)
For additional connecting cables, see under
Accessories.
A L 7781
B H 8281 HDL 8281 HDH 8181 HDH 8381H 8481 HD
L
14
Metal combination electrodes
Ag 90
80
AgS 6
181
AgS 8
281
Au 90
80
Pt 9
080
Pt 6
881
Pt 6
981
HD
sensor silver silver silver gold platinum platinum platinum
sensor sulphidized
sensor form pin
disk
ring
temperature range [°C] - 5 ... +100 -5 ... +100 -5 ... +100 -5 ... +100 -5 ... +100 -5 ... +100 -5 ... +100
pressure range p/∆p [bar] 6/3 6/3 10 6/3 6/3 6/3 10/3
length L [mm] 120 170 120 120 120 120 170
electrolyte liquid, refillable
gel, low-maintenance
Referid®, low-maintenance
diaphragm ceramic
KPG® annular gap
certified pressure and temperature consistency 1)
design corresponding illustration A D B A A E E
Application recommendationswater management
process chemistry
photo
redox potential measurement
silver/halid ions concentration
determination of cyanide/rhodanide
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.
L
A Ag 9080Au 9080Pt 9080
B AgS 8281 Pt 8181 Pt 8281 HD
C Pt 7781
15
Pt 8
181
Pt 8
281
HD
Pt 7
781
Metal combination electrodes
For redox measurements in water industry and
process chemistry.
Electrolyte:
3 mol/l KCI (type L 300), refillable
except Ag S 6181: electrolyte type L 320 K
gel with visible KCl reserves, not refillable
Referid® (polymer with visible KCl reserves),
not refillable
Shaft diameter:
12 mm
Connection:
screw plug head with thread Pg 13.5
Supply (design A):
pressure screw type 9980/55
with thread Pg 13.5
washer 9980/52
O-ring type 9932/06
Supply (design B-E, except HD):
washer 9980/52
O-ring type 9932/07
Supply (HD version):
HD sealing type 9980/51
Connecting cable:
e.g. type 9902/05 (length 5 m with free end)
For additional connecting cables, see under
Accessories.
Note (for electrodes with liquid electrolyte):
at temperatures above 100 °C sufficient overpres-
sure must counteract the boiling of the reference
electrolyte, e.g. 3.2 bar at 135 °C
platinum platinum platinum
- 5 ... +100 -5 ... +100 -5 ... +60
10 10 0,5
170 120 120
B B C
L
D AgS 6181
E Pt 6981 HDPt 6881
16
membrane glass L H H H H H S
membrane resistance (25°C) [MΩ] 30 300 300 2000 600 500 400
zero point at pH 7.0 4.6 7.0 7.0 7.0 7.0 7.0
temperature range [°C] - 30 ... +80 0 ...135 0 ...135 0 ...135 0 ...135 0 ...135 10 ...135
pH range [°C] 0 ... 12 0 ... 14 0 ... 14 0 ... 14 0 ... 14 0 ... 14 2 ... 14
sensor form sphere
dome
spear
shaft material glass
plastic
certified pressure and temperature consistency 1)
design corresponding illustration A A A A C B A
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.2) glass electrode with increased HF resistance3) pNa electrode for determination of sodium ion concentration, range of application pNa: 0 … 6, zero point pNa = 2.0
pH glass electrodes
A S 1181 HDL 1181 HDH 1171 H 1181 HDH 1191 HDS 1191 HDN 2981
B H 2781 HD
S 2781 HD
C H 1481 HD
D 9701/859501/759501/859101/859601/85
E 9517/859117/85
F 9504/85
L 11
81 H
D
H 117
1
H 118
1 HD
H 119
1 HD
H 148
1 HD
H 278
1 HD
S 11
81 H
D
L
17
S S N L H H H H S S Na
2000 600 100 30 300 300 600 500 400 600 300
7.0 7.0 7.0 7.0 4.6 7.0 7.0 7.0 7.0 7.0 3)
10 ...135 10 ...135 0 ... 50 -30 ... +80 0 ...135 0 ...135 10 ...135 10 ...135 10 ...135 10 ...135 0 ... 80
2 ... 14 2 ... 14 0 ... 14 0 ... 12 0 ... 14 0 ... 14 0 ... 14 0 ... 14 2 ... 14 2 ... 14 3)
A B A D D D F E D E D
S 11
91 H
D
S 27
81 H
D
N 298
12)
9701
/85
9501
/75
9501
/85
9504
/85
9517
/85
9101
/85
9117
/85
9601
/85
pH combination electrodes without
reference electrode
Single electrodes are useful if the life of glass and
reference electrode is significantly different. For
measuring the pH value, a separate reference elec-
trode is required.
Length L:
120 mm
Shaft diameter:
12 mm
Pressure range:
max. 10 bar
Connection and Design A-C:
screw plug head with thread Pg 13.5
Connection and Design D-F:
5 m fixed cable
flange cap
Supply (design A-C, except HD):
washer 9980/52
O-ring type 9932/07
Supply (HD version):
HD sealing type 9980/51
Supply (design D-F):
O-ring type 9932/07
pressure screw type 9980/55-14 has to be
ordered separately
Connecting cable (design A-C):
e.g. type 9902/05 (length 5 m with free end)
For additional connecting cables, see under
Accessories.
18
sensor silver silver gold antimony platinum wolfram platinum
sensor sulphidized
sensor form pin
ring
sensor diameter [mm] 5 5 2 6 6 2 6
temperature range [°C] 0 ... 70 0 ... 70 0 ... 70 0 ... 70 -30 ...+135 -30 ...+135 0 ... 70
shaft material glass
PVDF
Polyamid-12
certified pressure and temperature consistency 1)
design corresponding illustration A A A A B A D
Application recommendationsredox potential
redox potential, rhodanide, cyanide
silver/halid ions concentration
pH measurement in HF bearing media
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.
Metal electrodes
Ag 11
01
AgS 1
101
Au 11
01
Sb 1
101
Pt 1
801
HD
W 1
101
9008
/15
A Ag 1101AgS 1101Au 1101Sb 1101W 1101
B Pt 1801 HD
C 9006/259006/359006/95
D 9008/15
L
19
silver gold antimony
5 2 6
0 ... 70 0 ... 70 0 ... 70
C C C
9006
/25
9006
/35
9006
/95
Metal electrodes without
reference electrode
Single electrodes are useful if the life of metal and
reference electrode is significantly different. For
measuring with single electrodes, a separate refer-
ence electrode is required.
Length L:
120 mm
Shaft diameter:
12 mm
Pressure range:
max. 10 bar
Connection and design A – B:
screw plug head with thread Pg 13.5
Connection and design C – D:
5 m fixed cable
flange cap
Supply (design A – B, except HD):
washer 9980/52
O-ring type 9932/07
Supply (HD version):
HD sealing type 9980/51
Supply (design C – D):
O-ring type 9932/07
pressure screw type 9980/55-14 has to be
ordered separately
Connecting cable:
e.g. type 9902/05 (length 5 m with free end)
For additional connecting cables, see under
Accessories.
20
temperature range [°C] 0 ... 100 0 ... 100 0 ... 50 0 ... 50 -5 ... +135 -5 ... +135 -5 ... +135
pressure range p/∆p [bar] 10 10 10 0.5 10/3 10/3 6/3
length L [mm] 120 120 120 120 170 170 170
electrolyte liquid (type L 300)
gel (KCI saturated)
Referid® (visible KCl reserves)
liquid (type L 200)
internal resistance (25°C) [KΩ] 2 2 2 2 3 3 2
shaft material glass
PVDF
diaphragm ceramic
KPG® annular gap
platinum
PVDF
ground joint
frit
certified pressure and temperature consistency 1)
design corresponding illustration A B B C G G F
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.
Reference electrodes
B 19
81 H
D
B 18
81 H
D
B 11
81 H
D
9801
/85
B 13
91 H
D
B 14
91 H
D
B 15
91
A B 1981 HD
B B 1181 HDB 1881 HD
C 9801/85
D 9828/95
E 9834/95
L
F B 1591
G B 1491 HDB 1391 HD
21
-5 ... +135 -30 ... +50
6/3 6/3
120 120
3 1
D E
9828
/95
9834
/95
Reference electrodes
Single electrodes are useful if the life of measuring
and reference electrode is significantly different.
Shaft diameter:
12 mm
Connection and design A, B, F, G:
screw plug head coaxial with Pg 13.5
Connection and design C:
5 m fixed cable
flange cap
Connection and design D + E:
5 m fixed cable
refilling opening as hose olive
shaft constriction
Supply (design A, B, F, G, except HD):
washer 9980/52
O-ring type 9932/07
Supply (HD version):
HD sealing type 9980/51
Supply (design C):
O-ring type 9932/07
pressure screw type 9980/55-14 has to be
ordered separately
Supply (design D + E):
pressure screw type 9980/55 with thread Pg 13.5
washer 9980/52
O-ring type 9932/06
Connecting cable (design A, B, F, G):
e.g. type 9905/05 (length 5 m with free end)
For additional connecting cables, see under
Accessories.
Note (for electrodes with liquid electrolyte):
at temperatures above 100 °C sufficient overpres-
sure must counteract the boiling of the reference
electrolyte, e.g. 3.2 bar at 135 °C
L
22
temperature range [°C] - 5 ... +135
pressure range p/∆p [bar] 3/3
length L [mm] 95
internal resistance (25°C) [KΩ] 2
diaphragm ceramic
material of head PPS
design and connection 5 m fixed cable
Detachable reference electrode, according to DIN 19 264
9871
/95
Detachable reference electrode, according
to DIN 19 264
Preferably for measuring pH in industrial plants.
Advantage: Reference electrode and electrolyte
vessel can be replaced. The detachable reference
electrode must be accompanied by a suitable elec-
trolyte vessel (see page 24).
Electrolyte:
KCl saturated, refillable
Supply:
O-ring type 9932/05
9871/95
L
23
Reference electrodes are used outside the tempera-
ture application ranges stated in this catalogue
with the help of an electrolyte bridge. For applica-
tions below 0 °C, the low temperature electrolyte
L 200 or the low temperature reference electrode
9834/9 respectively must be used. For applications
above 100 °C, a sufficient overpressure must coun-
teract the boiling of the reference electrolyte, eg
3.2 bar at 135 °C. Electrodes with liquid electrolyte
render, in a corresponding pressure application, a
higher temperature employment range and
a longer life than low-maintenance electrodes.
In the case of liquid electrolyte electrodes,
a higher measuring accuracy can be expected.
Which reference electrode to which measuring electrode
reference electrodes with fixed cable reference electrodes with plug head, inst. thread
9801/8. 9828/9. 9834/9. 9871/9. B1181HD B1391HD1) B1491HD1) B15911) B1881HD B1981HD
9101/8. « ∑ « ® « ∑ ∑ « « «
9117/8. « ® « ∑ « ∑ ∑ « « «
9501/7. « ® « ∑ « ∑ ∑ ∑ ∑ «
9501/8. « ∑ « ® « ∑ ∑ ∑ ∑ «
9504/8. « ® « ∑ « ∑ ∑ « « ∑
9517/8. « ® « ∑ « ∑ ∑ ∑ ∑ «
9701/8. « ∑ ® ∑ « ∑ ∑ ∑ « «
9006/2. « ® « ∑ « « ∑ ∑ « ∑
9006/3. ∑ ® « ∑ ∑ « ∑ ∑ ∑ ∑
9006/9.2)« « « « « « « « ® «
9008/1. ∑ ® « ∑ ∑ « ∑ ∑ ∑ ∑
9601/8. ® ∑ « « ∑ ∑ ∑ ∑ ∑ «
L 1181 HD « ∑ ® ∑ ∑ ∑ ∑ ∑ « «
H 1171 ∑ ∑ « ∑ « ∑ ® ∑ ∑ «
H 1181 HD « ∑ « ∑ « ∑ ® ∑ ∑ «
H 1191 HD « ∑ « ∑ « ∑ ® ∑ ∑ «
H 1481 HD « ∑ « ∑ « ∑ ∑ « « ®
H 2781 HD « ∑ « ∑ « ∑ ∑ ® ∑ «
N 29812)« « « « « « « « ® «
S 1181 HD « ∑ « ∑ « ® ∑ « « «
S 1191 HD « ∑ « ∑ « ® ∑ « « «
S 2781 HD « ∑ « ∑ « ® ∑ « « «
Ag 1101 « ∑ « ∑ « « ® ∑ « ∑
AgS 1101 « ∑ « ∑ « « ® ∑ ∑ ∑
Au 1101 « ∑ « ∑ ∑ « ® ∑ ∑ ∑
Pt 1801HD « ∑ « ∑ ∑ « ® ∑ ∑ ∑
Sb 11012)« « « « « « « « ® «
W 1101 « ∑ « ∑ ∑ « ® ∑ ∑ «
1) To be used only with miniature pressure adapter type 9921/51 HD2) Use of other reference electrodes to be recommended only with the use of electrolyte key 9844/21 or B 4491
® = recommended; application outside the stated temperature application ranges with electrolyte bridge
∑ = suitable; application outside the stated temperature application ranges with electrolyte bridge
« = conditionally suitable; suitable depending on the application and installation of the measuring point;
under certain circumstances the use of an electrolyte bridge is advisable.
pH glass electrodes
with fixed cable
metal electrodes
with fixed cable
pNa glass electrode
with fixed cable
pH glass electrodes with plug
head and installation thread
metal electrodes with plug head
and installation thread
24
temperature range [°C] 0 ...135 -10 ... +135 0 ...135 -30 ... +135 0 ...135 0 ...135 0 ...135
pressure range p/∆p [bar] 3/3 3/3 3/3 3/3 3/3 3/3 3/3
internal resistance (25°C) [KΩ] 1.5 0.5 0.1 0.1 1.5 0.5 0.5
diaphragm ceramic
triple ceramic
ground joint
frit
platinum (side)
permeability [ml/h] 1) 0.05 0.15 2 2 0.05 0.1 0.15
reservoir (vessel) height [mm] 35 35 35 35 85 85 85
design corresponding illustration A A A A B B B
1) Average values at overpressure of 0.1 bar.
Electrolyte vessels for detachable reference electrodes, accordingto DIN 19 264
9863
/01
9863
/03
9863
/04
9863
/05
9864
/01
9864
/02
9864
/03
A 9863/019863/039863/049863/05
B 9864/059864/019864/029864/039864/049864/07
L
25
0 ...135 -30 ... +135 0 ...135
3/3 3/3 3/3
0.1 0.1 0.5
2 2 0.1
85 85 85
B B B
9864
/04
9864
/05
9864
/07
Electrolyte vessels for detachable reference
electrodes, according to DIN 19 264
Length L:
120 mm
Shaft diameter:
12 mm
Design:
shaft constriction
Shaft material:
glass
Supply:
pressure screw type 9980/55 with thread Pg 13.5
washer 9980/52
O-ring type 9932/06
26
temperature range [°C] 0 ...135 0 ...135 0 ...135 0 ...135 0 ...135 0 ...135 0 ...135
pressure range p/∆p [bar] 6/3 6/3 6/3 6/3 6/3 6/3 6/3
internal resistance (25°C) [KΩ] 1.5 1.5 1.5 0.5 0.1 0.1 0.1
shaft material glass
PTFE
PVDF
diaphragm frit
platinum
ground joint
ceramic (triple)
PTFE
permeability [ml/h] 1) 0.05 0.05 0.05 0.15 2 2 2
design corresponding illustration A C F F A C F
1) Average values at overpressure of 0.1 bar.
Electrolyte bridges for reference electrodes
A B 4441B 4411B 4451B 4471
B B 4491
C 9844/119844/149844/15
D 9844/21
E 9844/26(Ill. withpressure screw)
F 9844/019844/039844/049844/059844/029844/07
B 44
11
9844
/11
9844
/01
9844
/03
B 44
41
9844
/14
9844
/04
L
27
-30 ... +135 0 ...135 -30 ... +135 0 ...135 0 ...135 0 ...135 0 ...135 0 ...135 0 ...135
6/3 6/3 6/3 6/3 6/3 6/3 2/2 2/2 6/3
0.1 0.1 0.1 0.5 0.5 0.5 1.5 1.5 1.0
(side)
2 2 2 0.1 0.1 0.1 4 4 0.1
A C F A F F B D E
B 44
51
9844
/15
9844
/05
B 44
71
9844
/02
9844
/07
B 44
91
9844
/21
9844
/26
Electrolyte bridges for reference electrodes
Accessory for sophisticated pH measurement in
chemical processes. An electrolyte bridge is advis-
able if the measuring solution contains strong
electrode poisons or if the electrolyte of the refer-
ence electrode reacts with the measuring solution.
Hose olive:
d = 10 mm (except type 9844/26: d = 4 mm)
Length L:
120 mm
Shaft diameter:
12 mm
Design A + B:
thread Pg 13.5
Design C - E:
flange cap
Design F:
shaft constriction
Supply (design A + B):
washer 9980/52
O-ring type 9932/07
Supply (design C – E):
pressure screw type 9980/55-14 with
thread Pg 13.5
O-ring type 9932/07
Supply (design F):
pressure screw type 9980/55 with
thread Pg 13.5
washer 9980/52
O-ring type 9932/06
Accessories:
hose type 9980/00
(except for 9844/26: hose type 9961/09)
spare diaphragm for 9844/21 and B 4491:
type 9980/65
28
sensor Pt 100
sensor Pt 1000
secondary platinum electrode
pressure range [bar] 10 10 10 10 10 10 10
shaft material stainless steel 1.4571
glass
DURAN®
PVDF
connection 2-pole 2-pole 4-pole 2-pole SMEK SMEK SMEK
certified pressure and temperature consistency 1)
design corresponding illustration A B C D A C D
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.
Resistance thermometers with plug head
W 2
021
W 2
041
W 2
061
W 2
081
W 2
021
HD
W 2
061
HD
W 2
081
HD
A W 2021 HDW 2021W 4011W 2121W 4111
B W 2041
C W 2061 HDW 2061W2161
D W 2081W 2081 HDW 4081W 2181
L
29
(double)
10 10 10 10 10 10
4-pole 2-pole 2-pole 4-pole 2-pole 2-pole
D A A C D A
W 4
081
W 4
011
W 2
121
W 2
161
W 4
111
W 2
181
Resistance thermometers with plug head
Suitable for separate temperature measurement
and temperature compensation in the process.
Length L:
120 mm
Shaft diameter:
12 mm
Temperature range:
- 30 ... +135 °C
Connection:
screw plug head with Pg 13.5
You will find combined sensors with integrated
temperature probe in the respective chapters.
Supply (except HD):
washer 9980/52
O-ring type 9932/07
Supply (HD version):
HD sealing type 9980/51
Connecting cable (design A, B, F, G):
2-pole: e.g. type 9907/05
(length 5 m with free end)
4-pole: e.g. type 9909/15
(length 5 m with free end)
SMEK: e.g. type SMEK 20/05
(length 5 m with free end)
For additional connecting cables, see under
Accessories.
30
sensor Pt 100
sensor Pt 1000
pressure range [bar] 10 10 10
shaft material stainless steel 1.4571
DURAN®
design corresponding illustration A B A
Resistance thermometers with fixed cable
9010
/25
9010
/85
9011
/25
Resistance thermometers with fixed cable
Suitable for separate temperature measurement and
temperature compensation in the process.
Length L:
120 mm
Shaft diameter:
12 mm
Temperature range:
- 30 ... +135 °C
Connection:
5 m fixed cable, flange cap
Supply:
O-ring type 9932/07
pressure screw type 9980/55-14 has to be
ordered separately
A 9010/259011/25
B 9010/85
L
31
temperature range [°C] 0 ...135
pressure range [bar] 10
shaft material stainless steel 1.4571
Grounding rod
E 16
51
Grounding rod
The grounding rod serves for potential compensa-
tion for measuring in ungrounded liquids.
Length L:
120 mm
Shaft diameter:
12 mm
Connection:
screw plug head with thread Pg 13.5
Supply:
washer 9980/52
O-ring type 9932/07
Connecting cable:
e.g. type 9905/05 (length 5 m with free end)
For additional connecting cables, see under
Accessories.
E 1651
L
32
temperature sensor integrated Pt 1000 Pt 1000
temperature range [°C] - 30 ... +100 -30 ... +100 -30 ... +100 -30 ... +100 -30 ... +135 0 ... 80
cell constant (±10 %) [cm-1] 0.5 1.0 2.0 1.0 1.0 1.0
recommended measuring range (25°C) up to [mS/cm] 2) 100 200 400 200 200 200
pressure range [bar] 10 10 10 10 10 10
platinum electrodes, design 2-flat 2-flat 2-flat 2-flat 2-flat 2-ring
shaft material glass
POM
connection 2-pole 2-pole 2-pole 4-pole SMEK 2-pole
certified pressure and temperature consistency 1)
design corresponding illustration A A A A B C
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.2) Out of the recommended conductivity range the error of measurement can be >10%, also depending on conductivity meter.
Conductivity cells
LF 1
051
LF 1
101
LF 1
201
LF 1
101T
LF 1
101T
HD
LF 5
101
A LF 1201LF 1051LF 1101LF 1101T
B LF 1101T HD
C LF 5101TLF 5101
D LF 71T
L
Pt 1000 Pt 1000
0 ... 80 -30 ... +100
1.0 1.0
200 2.000
10 10
2-ring 4-ring
4-pole SMEK
C D
LF 5
101T
33
LF 7
1T
Conductivity cells
Robust conductivity cells for on-line measuring.
Cells with glass shaft for high chemical resistance.
Robust cells with plastic shaft.
Length L:
120 mm
Shaft diameter:
12 mm
Connection:
screw plug head with thread Pg 13.5
Supply (except HD):
washer 9980/52
O-ring type 9932/07
Supply (HD version):
HD sealing type 9980/51
Connecting cable:
2-pole: e.g. type 9907/05
(length 5 m with free end)
4-pole: e.g. type 9909/15
(length 5 m with free end)
SMEK: e.g. type SMEK 18/05
(length 5 m with free end)
For additional connecting cables, see under
Accessories.
For additional conductivity measuring cells, see
chapter MultiSens electrodes.
34
pH sensor 1)
redox sensor 2)
conductivity sensor 3)
temperature sensor integrated Pt 1000 Pt 100 NTC 30KΩ
temperature range [°C] - 5 ... +80 -5 ... +80 0 ... 80 0 ... 80 0 ... 80 0 ... 80 0 ... 80
pH range 2 ...13 2 ...13 2 ...13 2 ...13 2 ...13 2 ...13 2 ...13
pressure range [bar] 3 3 10 10 10 10 10
diaphragm ceramic
KPG® annular gap
fibre
shaft material glass
plastic
electrolyte gel, low-maintenance
Referid®, low-maintenance
connection coaxial coaxial coaxial SMEK SMEK SMEK coaxial
design corresponding illustration A B C D D D E
1) pH sensors with A Glass2) Redox sensors with platinum disk d = 4 mm3) Cell constant c=1.0 [cm-1] (±10 %)
AquaLine combination electrodes
AL 70
pH
AL 79
Pt
AL 80
pH
AL 81
pHT
AL 82
pHT
AL 83
pHT
AL 89
Pt
A AL 70 pH
B AL 79 Pt
C AL 80 pH
D AL 82 pHTAL 81 pHTAL 83 pHT
E AL 89 Pt
L
35
NTC 30KΩ NTC 30KΩ
0 ... 80 0 ... 80 -5 ... +80
2 ...13 2 ...13 –
– – –
coaxial SMEK SMEK
F G H
AL 90
pH
AL 93
pHT
AL 63
LFT
AquaLine combination electrodes
Especially for measuring in drinking water, industri-
al water and sewage range. Low-maintenance elec-
trodes.
Electrolyte:
gel with visible KCl reserves, not refillable
Referid® (polymer with visible KCl reserves),
not refillable
Length L:
120 mm
Shaft diameter:
12 mm
Zero point:
pH = 7.0
Connection:
screw plug head with thread Pg 13.5
Supply:
washer 9980/52
O-ring type 9932/07
Connecting cable:
coaxial: e.g. type 9902/05
(length 5 m with free end)
SMEK (design D+G): e.g. type SMEK 19/05
(length 5 m with free end)
SMEK (design H): e.g. type SMEK 18/05
(length 5 m with free end)
For additional connecting cables, see under
Accessories.
F AL 90 pH
G AL 93 pHT
H AL 63 LFT
L
36
Specification pH combination electrodes redox combination electrodes
sensor membrane glass type S platinum
sensor form sphere disk
membrane resistance (25°C) [MΩ] 500
zero point at pH 6.8
temperature range [°C] 0…140 0…140
pH range 0 ...14 0 ...14
pressure range vacuum to 10 bar vacuum to 10 bar
diaphragm ceramic ceramic
design corresponding illustration A to B C
Design length L / type no. length L / type no.
combination electrode 120 mm / SL 80-120pH 120 mm / SL 89-120Pt
connection: plug head, coaxial 225 mm / SL 80-225pH 225 mm / SL 89-225Pt
325 mm / SL 80-325pH 325 mm / SL 89-325Pt
360 mm / SL 80-360pH
425 mm / SL 80-425pH 425 mm / SL 89-425Pt
design corresponding illustration A C
with integrated temperature sensor Pt 100 120 mm / SL 82-120pHT
connection: plug head, SMEK* 225 mm / SL 82-225pHT
325 mm / SL 82-325pHT
360 mm / SL 82-360pHT
425 mm / SL 82-425pHT
design corresponding illustration B
with integrated temperature sensor Pt 1000 120 mm / SL 81-120pHT
connection: plug head, SMEK* 225 mm / SL 81-225pHT
325 mm / SL 81-325pHT
425 mm / SL 81-425pHT
design corresponding illustration B
* SteamLine SL81 and SL82 are also available with VP plug.
SteamLineSterilizable electrodes for biotechnological applications
37
Sterilizable low maintenance electrodes
for biotechnology, foodstuff and process
chemistry
SteamLine electrodes are steam-sterilizable sensors
with a high degree of reliability and precision.
Very fast and stable response thanks to pH glass
type S and new design. The pressurized reference
electrode is stable over a long period of time.
Safe sterilization with temperature monitoring is
possible. CIP- and SIP-capable, can be used under
most difficult conditions. Come with quality cer-
tificate, individual serial no. and seal of originality.
A SL 80-120pHSL 80-225pHSL 80-325pHSL 80-360pHSL 80-425pH
B SL 81-120pHTSL 81-225pHTSL 81-325pHTSL 81-425pHTSL 82-120pHTSL 82-225pHTSL 82-325pHTSL 82-360pHTSL 82-425pHT
C SL 89-120PtSL 89-225PtSL 89-325PtSL 89-425Pt
Electrolyte:
pressurized gel, with KCl reserves
Shaft diameter:
12 mm
Connection:
screw plug head with Pg 13.5
Connecting cable:
coaxial (design A+C):
e.g. type 9902/05 (length 5 m, with free end)
SMEK (design B):
e.g. type SMEK 19/05 (length 5 m, with free end)
For additional cables, see under Accessories.
For sterilizable electrodes with integrated tempera-
ture, redox and conductivity sensors, see chapter
MultiSens electrodes.
L
38
Specification pH combination electrodes redox combination electrodes
sensor membrane glass type S platinum
sensor form cylinder ring, d = 6 mm
membrane resistance (25°C) [MΩ] 600
temperature range [°C] 10 ...135 0 ...135
pH range 2 ...14
pressure range p/∆p [bar] 6/3 6/3
diaphragm ceramic ceramic
design corresponding illustration A to C D to F
Design length L / type no. length L / type no.
electrolyte reservoir vessel: length = 70 mm 120 mm / S 22120 120 mm / Pt 22120
150 mm / S 22150 150 mm / Pt 22150
200 mm / S 22200 200 mm / Pt 22200
design corresponding illustration A D
electrolyte reservoir vessel, large: 120 mm / S 26120 120 mm / Pt 26120
length = 130 mm 150 mm / S 26150 150 mm / Pt 26150
200 mm / S 26200 200 mm / Pt 26200
design corresponding illustration B E
electrolyte reservoir vessel: length = 70 mm 120 mm / S 22125
with double electrolyte system 150 mm / S 22155
200 mm / S 22205
design corresponding illustration A
electrolyte reservoir vessel, large: 120 mm / S 26125
length = 130 mm with double electrolyte system 150 mm / S 26155
200 mm / S 26205
design corresponding illustration B
double electrolyte system 120 mm / S 23128 120 mm / Pt 23128
for unpressurized mounting 150 mm / S 23158 150 mm / Pt 23158
200 mm / S 23208 200 mm / Pt 23208
design corresponding illustration C F
Other lenghts on request.
Sterilizable electrodes for biotechnological applications
39
Sterilizable electrodes for biotechnological
applications
Particularly suitable for application in the fields of
biotechnology and pharmaceuticals. Can be
sterilized at 135 °C, and may be autoclaved.
Optional double electrolyte system for particularly
sophisticated applications. Redox combination
electrodes with large platinum ring for reliable and
stable measuring values.
A S 22120
B S 26120
C S 23128
D PT 22120
E PT 26120
F PT 23128
Electrolyte:
2 mol KCl/l, refillable, with increased viscosity
(type no. L 310)
Zero point:
pH = 7.0
Connection:
plug head, coaxial
Connecting cable:
e.g. type 9902/05 (length 5 m with free end)
For additional connecting cables, see under
Accessories.
For sterilizable electrodes with integrated tempera-
ture, redox and conductivity sensors, see chapter
MultiSens electrodes.
L
40
temperature sensor Pt 1000 Pt 1000 Pt 1000 Pt 1000 Pt 1000 Pt 1000 Pt 1000
membrane glass A A A A A A S
membrane resistance (25°C) [MΩ] 500 500 500 500 500 500 900
temperature range [°C] 0 ...135 0 ... 100 0 ... 100 0 ...135 0 ... 100 0 ... 100 0 ...135
pH range 0 ... 14 2 ... 13 2 ... 13 0 ... 14 2 ... 13 2 ... 13 2 ... 14
pressure range [bar] 10 10 10 6 6 6 6
length L [mm] 170 120 225 170 120 225 120
sterilizable
diaphragm ceramic
platinum
hole
electrolyte liquid, refillable (L 300)
liquid, refillable (L 310)
Referid®, low-maintenance
certified pressure and temperature consistency 1)
connection SMEK SMEK SMEK VP VP VP SMEK
design corresponding illustration A A A B B B C
type no. of variant with VP plug head PET 20-120
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.
MultiSens electrodes pH, °C
PET
10-1
70 H
D
PET
50-1
20 H
D
PET
50-2
25 H
D
PET
60-1
70
PET
80-1
20
PET
80-2
25
PET
30-1
20
A PET 50-120 HDPET 10-170 HDPET 50-225 HD
B PET 80-120PET 60-170PET 80-225
L
41
Pt 1000 Pt 1000 Pt 1000 Pt 1000
S S S S
900 900 900 900
0 ...135 0 ...135 0 ...135 0 ...135
2 ... 14 2 ... 14 2 ... 14 2 ... 14
6 6 6 6
200 250 120 200
SMEK SMEK SMEK SMEK
C C D D
PET 20-200 PET 20-250 PET 26-120 PET 26-200
PET
30-2
00
PET
30-2
50
PET
36-1
20
PET
36-2
00
MultiSens electrodes
More information from a single measuring point.
Type series PET: pH combination electrode with
integrated temperature sensor.
Zero point:
pH = 7.0
Connection (design A+B):
screw plug head with thread Pg 13.5
Connection (design C+D):
smooth plug head for sterilizable electrode
holders
Supply (design A):
HD sealing type 9980/51
Supply (design B):
washer 9980/52
O-ring type 9932/07
Connecting cable:
SMEK: e.g. type SMEK 19/05
(length 5 m with free end)
VP: e.g. type VP6-19/05
(length 5 m with free end)
For additional connecting cables, see under
Accessories.
C PET 20-120PET 20-200PET 20-250PET 30-120PET 30-200PET 30-250
D PET 26-120PET 26-200PET 36-120PET 36-200
L
42
redox sensor platinum ring
temperature sensor Pt 1000 Pt 1000 Pt 1000 Pt 1000 Pt 1000 Pt 1000 Pt 1000
membrane glass A A A A A A S
membrane resistance (25°C) [MΩ] 500 500 500 500 500 500 900
temperature range [°C] 0 ...135 0 ...100 0 ....100 0 ...135 0 ...100 0 ...100 0 ...135
pH range 0 ... 14 2 ... 13 2 ... 13 0 ... 14 2 ... 13 2 ... 13 2 ... 14
pressure range [bar] 10 10 10 6 6 6 6
length L [mm] 170 120 225 170 120 225 120
sterilizable
diaphragm ceramic
platinum
hole
electrolyte liquid, refillable (L 300)
liquid, refillable (L 310)
Referid®, low-maintenance
certified pressure and temperature consistency 1)
connection SMEK SMEK SMEK VP VP VP SMEK
design corresponding illustration A A A B B B C
type no. of variant with VP plug head PETR 20-120
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.
MultiSens electrodes pH, mV, °C
PETR
10-1
70 H
D
PETR
50-1
20 H
D
PETR
50-2
25 H
D
PETR
60-1
70
PETR
80-1
20
PETR
80-2
25
PETR
30-1
20
A PETR 50-120 HDPETR 10-170 HDPETR 50-225 HD
B PETR 80-120PETR 60-170PETR 80-225
L
43
Pt 1000 Pt 1000 Pt 1000
S S S
900 900 900
0 ...135 0 ...135 0 ...135
2 ... 14 2 ... 14 2 ... 14
6 6 6
200 120 200
SMEK SMEK SMEK
C D D
PETR 20-200 PETR 26-120 PETR 26-200
PETR
30-2
00
PETR
36-1
20
PETR
36-2
00
MultiSens electrodes
More information from a single measuring point.
Type series PETR: pH combination electrode with
integrated redox and temperature sensor.
Zero point:
pH = 7.0
Connection (design A+B):
screw plug head with thread Pg 13.5
Connection (design C+D):
smooth plug head for sterilizable electrode
holders.
Supply (design A):
HD sealing type 9980/51
Supply (design B):
washer 9980/52
O-ring type 9932/07
Connecting cable:
SMEK: e.g. type SMEK 19/05
(length 5 m with free end)
VP: e.g. type VP6-19/05
(length 5 m with free end)
For additional connecting cables, see under
Accessories.
C PETR 20-120PETR 20-200PETR 30-120PETR 30-200
D PETR 26-120PETR 26-200PETR 36-120PETR 36-200
L
44
redox sensor: 2 platinum rings
temperature sensor Pt 1000 Pt 1000 Pt 1000 Pt 1000 Pt 1000 Pt 1000 Pt 1000
membrane glass A A A A A A S
membrane resistance (25°C) [MΩ] 500 500 500 500 500 500 900
temperature range [°C] 0 ...135 0 ...100 0 ...100 0 ...135 0 ...100 0 ...100 0 ...135
pH range 0 ...14 2 ...13 2 ...13 0 ...14 2 ... 13 2 ... 13 2 ... 14
pressure range [bar] 10 10 10 6 6 6 6
conductivity range (25°C) 10 10 10 10 10 10 10
up to [mS/cm] 2)
cell constant about [cm-1] 0.6 0.6 0.6 0.6 0.6 0.6 0.6
length L [mm] 170 120 225 170 120 225 200
sterilizable
diaphragm ceramic
platinum
hole
electrolyte liquid, refillable (L 300)
liquid, refillable (L 310)
Referid®, low-maintenance
certified pressure and temperature consistency 1)
connection SMEK SMEK SMEK VP VP VP SMEK
design corresponding illustration A A A B B B C
type no. of variant with VP plug head PETL 20-200
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.2) Out of the recommended conductivity range the error of measurement can be >10%, also depending on conductivity meter.
MultiSens electrodes pH, mV, µS, °C
PETL
10-
170
HD
PETL
50-
120
HD
PETL
50-
225
HD
PETL
60-
170
PETL
80-
120
PETL
80-
225
PETL
30-
200
A PETL 50-120 HDPETL 10-170 HDPETL 50-225 HD
B PETL 80-120PETL 60-170PETL 80-225
L
45
Pt 1000
S
900
0 ...135
2 ... 14
6
10
0.6
200
SMEK
D
PETL 26-200
PETL
36-
200
MultiSens electrodes
Five parameters from one MultiSens electrode:
pH, redox, conductivity, temperature and reference
system.
Zero point:
pH=7.0
Connection (design A+B):
screw plug head with thread Pg 13.5
Connection (design C+D):
smooth plug head for sterilizable electrode
holders
Supply (design A):
HD sealing type 9980/51
Supply (design B):
washer 9980/52
O-ring type 9932/07
Connecting cable:
SMEK: e.g. type SMEK 18/05
(length 5 m with free end)
VP: e.g. type VP6-18/05
(length 5 m with free end)
For additional connecting cables,
see under Accessories.
C PETL 20-200PETL 30-200
D PETL 26-200PETL 36-200
L
46
temperature sensor NTC 30KΩ NTC 30KΩ NTC 30KΩ NTC 30KΩ NTC 30KΩ NTC 30KΩ
membrane glass A A A S S S
membrane resistance (25°C) [MΩ] 500 500 500 900 900 900
temperature range [°C] 0 ...135 0 ...100 0 ...100 0 ...135 0 ...135 0 ...135
pH range 0 ...14 2 ...13 2 ...13 2 ...14 2 ... 14 2 ... 14
pressure range [bar] 10 10 10 6 6 6
length L [mm] 170 120 225 120 200 200
sterilizable
diaphragm ceramic
platinum
hole
electrolyte liquid, refillable (L 300)
liquid, refillable (L 310)
Referid®, low-maintenance
certified pressure and temperature consistency 1)
connection SMEK SMEK SMEK SMEK SMEK SMEK
design corresponding illustration A A A B B C
type no. of variant with VP plug head DPET 20-120 DPET 20-200 DPET 26-200
1) These types are supplied in series with Works Certificate 2.1 according to DIN EN 10204 regarding resistance to pressure and temperature.
MultiSens electrodes double pH, °C
DPET
10-1
70 H
D
DPET
50-1
20 H
D
DPET
50-2
25 H
D
DPET
30-1
20
DPET
30-2
00
DPET
36-2
00
A DPET 50-120 HDDPET 10-170 HDDPET 50-225 HD
B DPET 20-120DPET 30-120DPET 30-200DPET 20-200
L
L
47
MultiSens electrodes
Double pH measuring technology for measure-
ment point monitoring. Integrated temperature
sensor.
Zero points:
pH = 7.0 and pH = 4.6
Connection (design A):
screw plug head with thread Pg 13.5
Connection (design B+C):
smooth plug head for sterilizable electrode
holders
Supply (design A):
HD sealing type 9980/51
Connecting cable:
SMEK: e.g. type SMEK 18/05
(length 5 m with free end)
VP: e.g. type VP6-18/05
(length 5 m with free end)
For additional connecting cables,
see under Accessories.
C DPET 26-200DPET 36-200
L
48
conductivity sensor: 4 platinum rings
temperature sensor Pt 1000 Pt 1000
temperature range [°C] - 5 ... +80 -5 ... +80
pressure range [bar] 10 6
conductivity range (25°C) 1000 1000
up to [mS/cm] 1)
cell constant about [cm-1] 1.0 1.0
length L [mm] 120 120
connection SMEK VP
design corresponding illustration A B
1) Out of the recommended conductivity range the error of measurement can be >10%, also depending on type of conductivity meter.
MultiSens electrodes µS, °C
LF 4
TH 1
0-12
0
LF 4
TH 6
0-12
0
A LF 4TH 10-120
B LF 4TH 60-120
L
49
MultiSens electrodes
4-pole conductivity cells with integrated tempera-
ture sensor.
Connection:
screw plug head with thread Pg 13.5
Supply:
washer 9980/52
O-ring type 9932/07
Connecting cable:
SMEK: e.g. type SMEK 18/05
(length 5 m with free end)
VP: e.g. type VP6-18/05
(length 5 m with free end)
For additional connecting cables,
see under Accessories.
50
temperature range [°C] 0 ... 45 0 ... 45
pressure range [bar] ± 0.1 ± 0.1
measuring range oxygen in water [mg/l] 0 ... 20 0 ... 20
length L [mm] 120 120
shaft material plastic (POM) plastic (POM)
temperature sensor integrated NTC 100 kΩ NTC 100 kΩ
design and connection screw plug head Pg 13.5 2 m fixed cable, flange cap
supply 1 spare membrane head 1 spare membrane head
1 ampoule zero point solution 1 ampoule zero point solution
50 ml electrolyte type L 6708 50 ml electrolyte type L 6708
washer type 9980/52 O-ring type 9932/07
O-ring type 9932/07
design corresponding illustration A B
Oxygen electrodes
A OX 1101
B 9009/22
L
OX 110
1
9009
/22
51
Oxygen Electrodes for measuring dissolved
oxygen
Particularly suitable for the drinking water,
industrial water and sewage range.
Mode of functioning:
For measuring dissolved oxygen in liquids, the
“Clark” principle is applied with this electrode. The
electrode is filled with an alkaline electrolyte and
covered with a membrane that is permeable to
oxygen. For measuring, a minimum flow speed of
10 cm/sec should prevail. The electrodes possess an
integrated temperature sensor for automatic tem-
perature compensation.
Cathode:
platinum
Anode:
silver
Electrolyte:
sodium phosphate solution type L 6708
Membrane:
PTFE, 25µm
Shaft diameter:
12 mm
Connection cable for OX 1101:
e.g. type 9909/23 (length 3 m with free end),
max. recommended cable length: 5 m
For additional connecting cables,
see under Accessories.
Accesssories:
zero point solution type OX 060:
60 ampoules á 25 ml
electrolyte solution type L 6708: PE bottle 50 ml
service set type OX 928: 5 spare membrane
heads, 50 ml electrolyte solution L 6708,
6 ampoules zero point solution
type OX 929: 5 spare membrane heads
Connection cables for combination electrodes
measuring electrodes
connection cable electrode socket cable type, length1) instrument connection max. temp.
9901/01 socket 9901/00 KA 01, 1 m free end 80 °C
9901/05 KA 01, 5 m free end 80 °C
9901/010 KA 01, 10 m free end 80 °C
9902/01 KA 02, 1 m free end 135 °C
9902/05 KA 02, 5 m free end 135 °C
9902/010 KA 02, 10 m free end 135 °C
9903/01 socket 9901/00 KA 01, 1 m, as extension plug 9903/00 80 °C
9903/05 KA 01, 5 m, as extension 80 °C
9904/02 KA 02, 2 m, as extension 135 °C
9904/05 KA 02, 5 m, as extension 135 °C
9912/01 socket 9901/00 KA 01, 1 m plug 9912/00 80 °C
9917/01 socket 9901/00 KA 01, 1 m plug 9917/00 80 °C
9917/02 KA 01, 2 m 80 °C
9917/05 KA 01, 5 m 80 °C
9918/05 KA 02, 5 m 135 °C
1) Other cable lengths on request. Recommended max. cable length 20 m.
Connection cable for reference electrodes
connection cable electrode socket cable type, length1) instrument connection max. temp.
9905/01 socket 9905/00 KA 06, 1 m free end 80 °C
9905/05 KA 06, 5 m free end 80 °C
9905/010 KA 06, 10 m free end 80 °C
9906/05 socket 9905/00 KA 06, 5 m, as extension plug 9906/00 80 °C
9915/01 socket 9905/00 KA 06, 1 m plug 9915/00 80 °C
9915/05 KA 06, 5 m 80 °C
1) Other cable lengths on request. Recommended max. cable length 50 m.
52
Accessories: Connection cables
Connection cables for conductivity cells without temperature sensor
resistance thermometers
connection cable electrode socket cable type, length1) instrument connection max. temp.
9907/01 socket 9907/00 KA 07, 1 m free end 80 °C
9907/05 KA 07, 5 m free end 80 °C
9907/21 socket 9907/00 KA 07, 1 m 2 x plug 9915/00 80 °C
9908/05 socket 9907/00 KA 07, 5 m, as extension plug 9908/00 80 °C
1) Other cable lengths on request. Recommended max. cable length 5 m.
Connection cables for conductivity cells with temperature sensor
resistance thermometers with two resistances
connection cable electrode socket cable type, length1) instrument connection max. temp.
9909/12 socket 9909/00 KA 09, 2 m free end 80 °C
9909/15 KA 09, 5 m free end 80 °C
9910/11 socket 9909/00 KA 09, 1 m plug 9910/00 80 °C
9909/31 socket 9909/00 KA 07, 1 m; for platinizing of 2 x plug 9915/00 80 °C
conductivity cells with
temperature sensor
1) Other cable lengths on request. Recommended max. cable length 5 m.
53
Connection cables
54
Connection cables
Connection cables for oxygen electrodes
connection cable electrode socket cable type, length1) instrument connection max. temp.
9909/21 socket 9909/00 KA 10, 1 m free end 80 °C
9909/23 KA 10, 3 m free end 80 °C
9910/21 socket 9909/00 KA 10, 1 m plug 9910/00 80 °C
9910/25 KA 10, 5 m 80 °C
1) Other cable lengths on request. Recommended max. cable length 5 m.
Connection cables for MultiSens electrodes
connection cable electrode socket cable type, length1), MultiSens instrument connection max. temp.
SMEK-18/05 socket SMEK-B KA 18, 5 m, (PETL, DPET, LF) free end 120 °C
SMEK-18/10 KA 18, 10 m (PETL, DPET, LF) free end 120 °C
SMEK-19/05 KA 19, 5 m (PET, PETR) free end 130 °C
SMEK-19/10 KA 19, 10 m (PET, PETR) free end 130 °C
SMEK-20/05 KA 20, 5 m free end 80 °C
VP6-18/05 socket VP6-B KA 18, 5 m (PETL, DPET, LF) free end 120 °C
VP6-19/05 KA 19, 5 m (PET, PETR) free end 130 °C
1) Other cable lengths on request. Recommended max. cable length 10 m.
Connection cable
Plugs, sockets and accessories for self assembly
type no. housing material description
9901/00 PPS coaxial socket for measuring electrodes and combination electrodes
9903/00 PPS coaxial plug for measuring electrodes and combination electrodes, for instrument connection or as extension
9905/00 PPS socket for reference electrodes
9906/00 PPS plug for reference electrodes, for instrument connection or as extension
9907/00 PPS 2-pole socket for resistance thermometers and conductivity cells without temperature sensor
9908/00 PPS 2-pole plug for resistance thermometers and conductivity cells without temperature sensor
9909/00 PPS 4-pole socket for resistance thermometers with two resistances,
conductivity cells with temperature sensor and oxygen electrodes
9910/00 PPS 4-pole plug for resistance thermometers with two resistances,
conductivity cells with temperature sensor and oxygen electrodes
9911/50 mounting tool for cable socket 9901/00 and 9905/00
9911/51 PPN cover cap for electrode plug head and plugs 9903/00, 9906/00, 9908/00 and 9910/00
9911/52 PPN cover cap for sockets 9901/00, 9905/00, 9907/00, 9909/00, 9911/53, 9911/54, 9911/55 and 9911/56
9911/53 polysulfone instrument socket for plug 9903/00
9911/54 polysulfone instrument socket for plug 9906/00
9911/55 polysulfone instrument socket for plug 9908/00
9911/56 polysulfone instrument socket for plug 9910/00
9915/00 PVC banana plug 4 mm
9917/00 brass, nickel-plated DIN plug for connection to instruments with DIN socket
SMEK-B PPS SMEK cable socket for SMEK electrode plug head
SMEK-S PPS SMEK-plug for connection to instruments with SMEK socket
SMEK-GB PPS SMEK instrument socket
VP6-B brass, nickel-plated VP-6-pole-cable socket for VP electrode plug head
Z 515 mounting tool for SMEK plug/socket
Cables for self assembly
type no. description Ø application max. temp.
KA 01 coaxial cable 5 mm measuring electrodes, combination electrodes 80 °C
KA 02 coaxial cable 5 mm measuring electrodes, combination electrodes 135 °C
KA 03 triaxial cable 5 mm combination electrodes with temperature sensor 80 °C
KA 04 three-core cable 5 mm resistance thermometers with grounding 80 °C
KA 05 single-wire cable 5 mm reference electrodes 135 °C
KA 06 single-wire cable 4 mm reference electrodes 80 °C
KA 07 twin-core cable 5 mm resistance thermometers, conductivity cells 80 °C
KA 08 twin-core cable 5 mm resistance thermometers, conductivity cells 135 °C
KA 09 four-core cable 5 mm conductivity cells with temperature sensor, double temp. sensors 80 °C
KA 10 four-core cable, shielded 5 mm oxygen electrodes 80 °C
KA 18 double coaxial cable, 3 cords 7.5 mm MultiSens electrodes (PETL, DPET, LF) 120 °C
KA 19 coaxial cable, 4 cords 6 mm MultiSens electrodes (PET, PETR) 130 °C
KA 20 six-wire cable, shielded 5.5 mm resistance thermometers with SMEK head 80 °C
55
56
Other accessories and spare parts
Accessories for electrodes and electrolyte bridges
type no. description
9921/62 electrolyte pressure reservoir, 110 ml, up to 6 bar
9940/03 watering cap
9955/00 KCl reservoir, 200 ml, suitable pressure tubing: 9980/00
9961/09 flexible pressure tubing, NW 4 mm, 2 m, PU, e.g. for miniature pressure adapter type 9921/51 HD
9980/00 flexible pressure tubing, silicone, textile mantle, 8x2 mm,
e.g. for electrolyte pressure reservoirs type 9921/62 and 9955/00
9980/10 hose coupling for hose type 9980/00
9980/21 hose band clip, Ø = 11–19 mm, for hose type 9980/00
9980/65 PTFE diaphragm for electrolyte bridges type 9844/21 and B 4491
9980/66 PTFE knurled nut for electrolyte bridges type 9844/21 and B 4491
Accessories for mounting electrodes
type no. description
9980/51 high pressure sealing unit, with 2 O-rings
9980/52 washer 18/14/4, PVDF
9980/55 pressure screw, Pg 13.5, PPS,
for closing of openings with Pg 13.5
9921/25 O-ring 12-3.5, PTFE mantle
9932/05 O-ring 26-3
9932/06 O-ring 10-4
9932/07 O-ring 10-3.5
Z 501 O-ring 10.5-1.5
Accesssories for oxygen electrodes
type no. description
OX 928 Service set: 5 spare membrane heads,
50 ml electrolyte L 6708, 6 ampoules of zero point solution
OX 929 5 spare membrane heads
Miniature pressure adapter
type no. description
9921/51 HD miniature pressure adapter, PPS, for mounting of electrodes with lateral electrolyte
refill opening and Pg 13.5 thread, up to a pressure of 10 bar. The maximum permissible
pressure difference between the inside of the reference electrode and the measuring
media amounts to 3 bar. 9921/51 HD (Illust. with reference electrode B 1491 HD)
57
Working reference buffer solutions according to DIN 19 266
sterilized for longer storability, without preservation
type no. pH value at 25 °C content
L 4794 4.01 60 ampoules à 25 ml, with manufacturer certificate
L 4796 6.87 60 ampoules à 25 ml, with manufacturer certificate
L 4799 9.18 60 ampoules à 25 ml, with manufacturer certificate
L 4790 4.01/6.87 2 x 30 ampoules à 25 ml, with manufacturer certificate
L 4798 4.01/6.87/9.18 3 x 20 ampoules à 25 ml, with manufacturer certificate
L 401 4.01 1000 ml in DURAN® glass bottle, with manufacturer certificate
L 4014 4.01 250 ml in DURAN® glass bottle, with manufacturer certificate
L 687 6.87 1000 ml in DURAN® glass bottle, with manufacturer certificate
L 6874 6.87 250 ml in DURAN® glass bottle, with manufacturer certificate
L 918 9.18 1000 ml in DURAN® glass bottle, with manufacturer certificate
L 9184 9.18 250 ml in DURAN® glass bottle, with manufacturer certificate
Technical buffer solutions according to DIN 19 267
sterilized for longer storability, without preservation
type no. pH value at 25 °C content
L 4694 4.00 60 ampoules à 25 ml
L 4697 7.00 60 ampoules à 25 ml
L 4691 10.00 60 ampoules à 25 ml
L 4690 4.00/7.00 2 x 30 ampoules à 25 ml
L 4698 4.00/7.00/10.00 3 x 20 ampoules à 25 ml
L 400 4.00 1000 ml in DURAN® glass bottle
L 4004 4.00 250 ml in DURAN® glass bottle
L 700 7.00 1000 ml in DURAN® glass bottle
L 7004 7.00 250 ml in DURAN® glass bottle
L 100 10.00 1000 ml in DURAN® glass bottle
L 1004 10.00 250 ml in DURAN® glass bottle
Colored technical buffer solutions in plastic bottles
type no. pH value at 25 °C content
LC 4004 K 4.00 250 ml in PE bottle
LC 7004 K 7.00 250 ml in PE bottle
LC 1004 K 10.00 250 ml in PE bottle
Technical buffer solutions according to DIN 19 267 in canisters
for longer storability preserved with thymol
type no. pH value at 25 °C content
L 4655 4.65 5 l in plastic canister
L 6795 6.79 5 l in plastic canister
Buffer solutions
Traceable to PTB and NIST
58
Electrolyte solutions
Electrolyte solutions, aqueous
for reference electrodes and electrolyte bridges
type no. description content
L 200 for low temperature (-30°C) 1000 ml in DURAN® glass bottle
L 2004 for low temperature (-30°C) 250 ml in DURAN® glass bottle
L 2114 2 mol/l KNO3 + 0.001 mol/l KCl 250 ml in DURAN® glass bottle
for Ag combination electrodes
L 300 KCl solution 3 mol/l 1000 ml in DURAN® glass bottle, sterilized
L 3004 KCl solution 3 mol/l 250 ml in DURAN® glass bottle, sterilized
L 310 KCl solution 2 mol/l, thickened 1000 ml in DURAN® glass bottle
L 3104 KCl solution 2 mol/l, thickened 250 ml in DURAN® glass bottle
L 350 KCl solution 3.5 mol/l 1000 ml in DURAN® glass bottle, sterilized
L 3504 KCl solution 3.5 mol/l 250 ml in DURAN® glass bottle, sterilized
L 420 KCl solution 4.2 mol/l 1000 ml in DURAN® glass bottle
L 4204 KCl solution 4.2 mol/l 250 ml in DURAN® glass bottle
Electrolyte solutions, organic
for measurements in organic solutions: for reference electrodes and electrolyte bridges
type no. description content
L 5014 LiCl 0.1 mol/l in glacial acetic acid 250 ml in DURAN® glass bottle
L 5024 LiCl 0.1 mol/l in methanol 250 ml in DURAN® glass bottle
L 5034 LiCl 0.1 mol/l in ethanol 250 ml in DURAN® glass bottle
L 4804 for tensides containing solutions 250 ml in DURAN® glass bottle
59
Solutions for oxygen measurements
type no. description content
OX 060 zero point solution 60 ampoules à 25 ml
L 6708 electrolyte solution 50 ml in PE bottle
Solutions and accessories for conductivity measurements
type no. description content
LF 906 platinizing solution 1 x 6 ampoules à 25 ml
LF 990 test solution KCl 0.001 mol/l (147 µS/cm) 3 x 6 ampoules à 25 ml
LF 991 test solution KCl 0.01 mol/l (1.41 mS/cm) 3 x 6 ampoules à 25 ml
LF 992 test solution KCl 0.1 mol/l (12.9 mS/cm) 3 x 6 ampoules à 25 ml
LF 995 test solutions KCl 0.01/0.1/1 mol/l (1.41/12.9/112 mS/cm) 3 x 6 ampoules à 25 ml
LF 999/Set test solutions KCl 0.01/0.1 mol/l and solution LF 906 3 x 6 ampoules à 25 ml
LF 1000/Set like LF 999, additionally platinizing vessel and cable B1N 3 x 6 ampoules à 25 ml
LF 1024K test solution KCl 0.01 mol/l (1.41 mS/cm) 250 ml in PE bottle
Redox test solutions
type no. redox voltage content
Pt/calomel (KCl sat.) Pt/Ag/AgCl (KCl 3 mol/l)
L 4619 180 mV 220 mV 60 ampoules à 25 ml, according to DIN 38 404-C6
L 4643 430 mV 470 mV 60 ampoules à 25 ml
L 4660 600 mV 640 mV 60 ampoules à 25 ml
L 4648 180, 430, 600 mV 220, 470, 640 mV 3 x 20 ampoules à 25 ml
L 430 430 mV 470 mV 1000 ml in DURAN® glass bottle
L 4304 430 mV 470 mV 250 ml in DURAN® glass bottle
Cleaning solution for combination electrodes and reference electrodes
type no. description content
L 510 pepsin/hydrochloric acid solution 1000 ml in DURAN® glass bottle
L 5104 pepsin/hydrochloric acid solution 250 ml in DURAN® glass bottle
Other solutions
60
Electrodes
9006/25 28 511 1159 18
9006/35 28 511 1553 18
9006/95 28 511 1253 18
9008/15 28 511 1356 18
9009/22 28 511 1623 50
9010/25 28 511 9351 30
9010/85 28 511 1759 30
9011/25 28 511 1853 30
9101/85 28 511 5752 16
9117/85 28 511 2558 16
9182/85 28 511 2755 12
9182/95 28 511 3024 12
9183/85 28 511 2952 12
9501/75 28 511 4756 16
9501/85 28 511 4859 16
9504/85 28 511 5058 16
9517/85 28 511 5255 16
9582/85 28 511 8655 12
9582/95 28 511 8844 12
9583/85 28 511 8758 12
9601/85 28 511 5358 16
9701/85 28 511 8955 16
9801/85 28 511 7856 20
9828/95 28 511 6851 20
9834/95 28 511 6954 20
9844/01 28 511 8006 26
9844/02 28 511 8014 26
9844/03 28 511 8022 26
9844/04 28 511 8039 26
9844/05 28 511 8047 26
9844/07 28 511 8055 26
9844/11 28 511 8109 26
9844/14 28 511 8117 26
9844/15 28 511 8125 26
9844/21 28 511 8141 26
9844/26 28 511 8199 26
9863/01 28 511 8409 24
9863/03 28 511 8417 24
9863/04 28 511 8425 24
9863/05 28 511 8433 24
9864/01 28 511 8306 24
9864/02 28 511 8314 24
9864/03 28 511 8322 24
9864/04 28 511 8339 24
9864/05 28 511 8347 24
9864/07 28 511 8355 24
9871/95 28 511 7556 22
Ag 1101 28 511 1048 18
Ag 9080 28 511 0721 14
AgS 1101 28 511 5959 18
AgS 6181 28 511 8811 14
AgS 8281 28 511 8836 14
AL 63 LFT 28 511 3016 34
AL 70 pH 28 511 3049 34
AL 79 Pt 28 511 3073 34
AL 80 pH 28 511 3098 34
AL 81 pHT 28 511 3102 34
AL 82 pHT 28 511 3119 34
AL 83 pHT 28 511 3127 34
AL 89 Pt 28 511 3143 34
AL 90 pH 28 511 3176 34
AL 93 pHT 28 511 3205 34
Au 1101 28 511 1031 18
Au 9080 28 511 0787 14
B 1181 HD 28 511 1701 20
B 1391 HD 28 511 1491 20
B 1491 HD 28 511 1504 20
B 1591 28 511 6165 20
B 1881 HD 28 511 1767 20
B 1981 HD 28 511 1915 20
B 4411 28 511 8203 26
B 4441 28 511 8211 26
B 4451 28 511 8228 26
B 4471 28 511 8236 26
B 4491 28 511 8244 26
DPET 10-170 HD 28 511 2509 46
DPET 20-120 28 512 6996 46
DPET 20-200 28 512 6877 46
DPET 26-200 28 512 6885 46
DPET 30-120 28 512 8689 46
DPET 30-200 28 512 8697 46
DPET 36-200 28 512 8701 46
DPET 50-120 HD 28 511 2471 46
DPET 50-225 HD 28 512 8586 46
E 1651 28 511 9754 31
H 1171 28 511 2114 16
H 1181 HD 28 511 1467 16
H 1191 HD 28 511 1931 16
H 1481 HD 28 511 1948 16
H 2781 HD 28 511 1956 16
H 6181 HD 28 511 1426 8
H 6191 HD 28 511 1434 8
H 6281 28 511 0146 8
H 6291 28 511 1964 8
H 6381 28 511 0195 8
H 6391 28 511 1923 8
H 6481 28 511 0919 8
H 8181 HD 28 511 1007 13
H 8281 HD 28 511 1015 13
H 8381 28 511 0976 13
H 8481 HD 28 511 1072 13
H 9080 28 511 0795 10
H 9090 28 511 0602 10
H 9180 28 511 0591 10
L 1181 HD 28 511 1475 16
L 6191 28 511 7967 8
L 7781 28 511 8088 13
L 8281 HD 28 511 1418 13
L 9080 28 511 8158 10
L 9090 28 511 8174 10
L 9180 28 511 8166 10
LF 1051 28 511 9808 32
LF 1101 28 511 9816 32
LF 1101T 28 511 9832 32
LF 1101T HD 28 511 2188 32
LF 1201 28 511 9824 32
LF 5101 28 511 9849 32
LF 5101T 28 511 9857 32
LF4TH 10-120 28 512 6717 48
LF4TH 60-120 28 512 6725 48
LF 71T 28 511 9713 32
N 2981 28 511 0208 16
OX 1101 28 511 9705 50
PET 10-170 HD 28 512 7405 40
PET 20-120 28 512 7557 40
PET 20-200 28 512 7573 40
PET 20-250 28 512 7565 40
PET 26-120 28 512 7602 40
PET 26-200 28 512 7619 40
PET 30-120 28 512 8007 40
PET 30-200 28 512 8023 40
PET 30-250 28 512 8245 40
PET 36-120 28 512 8253 40
PET 36-200 28 512 8261 40
PET 50-120 HD 28 511 2455 40
PET 50-225 HD 28 511 2496 40
PET 60-170 28 512 7651 40
PET 80-120 28 512 7668 40
PET 80-225 28 512 7676 40
PETL 10-170 HD 28 511 2488 44
PETL 20-200 28 512 7746 44
PETL 26-200 28 512 7762 44
PETL 30-200 28 512 8537 44
PETL 36-200 28 512 8545 44
PETL 50-120 HD 28 511 2463 44
PETL 50-225 HD 28 512 7943 44
PETL 60-170 28 512 7787 44
PETL 80-120 28 512 7951 44
PETL 80-225 28 512 7902 44
PETR 10-170 HD 28 512 7816 42
PETR 20-120 28 512 7857 42
PETR 20-200 28 512 7865 42
PETR 26-120 28 512 7927 42
PETR 26-200 28 512 7919 42
PETR 30-120 28 512 8426 42
PETR 30-200 28 512 8475 42
PETR 36-120 28 512 8491 42
PETR 36-200 28 512 8512 42
PETR 50-120 HD 28 511 2209 42
PETR 50-225 HD 28 512 7935 42
PETR 60-170 28 512 7881 42
PETR 80-120 28 512 7898 42
PETR 80-225 28 512 7873 42
Pt 1801 HD 28 511 2233 18
Pt 22120 28 512 8364 38
Pt 22150 28 512 8372 38
Pt 22200 28 512 8389 38
Pt 23128 28 512 8956 38
Pt 23158 28 512 8964 38
Pt 23208 28 512 8972 38
Pt 26120 28 512 8434 38
Pt 26150 28 512 8442 38
Pt 26200 28 512 8459 38
Pt 6881 28 511 1101 14
Pt 6981 HD 28 511 1442 14
Pt 7781 28 511 0754 14
Pt 8181 28 511 0992 14
Pt 8281 HD 28 511 2414 14
Pt 9080 28 511 1089 14
S 1181 HD 28 511 1483 16
S 1191 HD 28 511 2085 16
S 22120 28 512 8056 38
S 22125 28 512 8553 38
S 22150 28 512 8064 38
S 22155 28 512 8561 38
S 22200 28 512 8072 38
S 22205 28 512 8578 38
S 23128 28 512 8607 38
S 23158 28 512 8623 38
S 23208 28 512 8648 38
S 26120 28 512 8348 38
S 26125 28 512 8878 38
S 26150 28 512 8331 38
S 26155 28 512 8886 38
S 26200 28 512 8356 38
S 26205 28 512 8894 38
S 2781 HD 28 511 2093 16
S 6181 HD 28 511 1972 8
S 6191 HD 28 511 1989 8
Indextype no. order no. page type no. order no. page type no. order no. page type no. order no. page
61
S 6281 28 511 0187 8
S 6291 28 511 1997 8
S 6381 28 511 2369 8
S 6391 28 511 2077 8
S 6481 28 511 2385 8
S 9080 28 511 2393 10
S 9090 28 511 2422 10
S 9180 28 511 2406 10
Sb 1101 28 511 1056 18
SL 80-120pH 28 511 3213 36
SL 80-225pH 28 511 3246 36
SL 80-325pH 28 511 3254 36
SL 80-360pH 28 511 3468 36
SL 80-425pH 28 511 3262 36
SL 81-120pHT 28 511 3221 36
SL 81-225pHT 28 511 3279 36
SL 81-325pHT 28 511 3476 36
SL 81-425pHT 28 511 3295 36
SL 82-120pHT 28 511 3238 36
SL 82-225pHT 28 511 3349 36
SL 82-325pHT 28 511 3287 36
SL 82-360pHT 28 511 3484 36
SL 82-425pHT 28 511 3357 36
SL 89-120Pt 28 511 3402 36
SL 89-225Pt 28 511 3419 36
SL 89-325Pt 28 511 3427 36
SL 89-425Pt 28 511 3443 36
W 1101 28 509 7216 18
W 2021 28 511 9113 28
W 2021 HD 28 511 2011 28
W 2041 28 511 9068 28
W 2061 28 511 9027 28
W 2061 HD 28 511 2036 28
W 2081 28 511 9162 28
W 2081 HD 28 511 2044 28
W 2121 28 511 9187 28
W 2161 28 511 9208 28
W 2181 28 511 9179 28
W 4011 28 511 9619 28
W 4081 28 511 9627 28
W 4111 28 511 9635 28
Accessories
9901/00 28 512 6006 55
9901/01 28 512 4013 52
9901/010 28 512 4108 52
9901/05 28 512 4054 52
9902/01 28 512 4116 52
9902/010 28 512 4202 52
9902/05 28 512 4157 52
9903/00 28 512 6014 55
9903/01 28 512 4219 52
9903/05 28 512 4251 52
9904/02 28 512 4321 52
9904/05 28 512 4354 52
9905/00 28 512 6022 55
9905/01 28 512 4416 52
9905/010 28 512 4502 52
9905/05 28 512 4457 52
9906/00 28 512 6039 55
9906/05 28 512 4551 52
9907/00 28 512 6047 55
9907/01 28 512 4613 53
9907/05 28 512 4654 53
9907/21 28 512 4716 53
9908/00 28 512 6055 55
9908/05 28 512 4851 53
9909/00 28 512 6063 55
9909/12 28 512 5129 53
9909/15 28 512 5153 53
9909/21 28 512 5018 54
9909/23 28 512 5034 54
9909/31 28 512 5618 53
9910/00 28 512 6071 55
9910/11 28 512 5515 53
9910/21 28 512 5215 54
9910/25 28 512 5248 54
9911/50 28 512 6088 55
9911/51 28 512 6096 55
9911/52 28 512 6109 55
9911/53 28 512 6117 55
9911/54 28 512 6125 55
9911/55 28 512 6133 55
9911/56 28 512 6141 55
9912/01 28 512 3855 52
9915/00 28 512 5983 55
9915/01 28 512 5712 52
9915/05 28 512 5753 52
9917/00 28 512 6203 55
9917/01 28 512 5318 52
9917/02 28 512 5326 52
9917/05 28 512 5359 52
9918/05 28 512 5453 52
9921/25 28 505 1345 56
9921/51 HD 28 505 1604 56
9921/62 28 505 2309 56
9932/05 28 505 1526 56
9932/06 28 505 1534 56
9932/07 28 505 1542 56
9940/03 28 512 3736 56
9955/00 28 505 1945 56
9961/09 28 505 1086 56
9980/00 28 505 2017 56
9980/10 28 505 2588 56
9980/21 28 505 3219 56
9980/51 28 505 1756 56
9980/52 28 505 1764 56
9980/55 28 505 1891 56
9980/65 28 512 6158 56
9980/66 28 512 6244 56
KA 01 28 512 3617 55
KA 02 28 512 3625 55
KA 03 28 512 3633 55
KA 04 28 512 3609 55
KA 05 28 512 3641 55
KA 06 28 512 3658 55
KA 07 28 512 3666 55
KA 08 28 512 3674 55
KA 09 28 512 3682 55
KA 10 28 512 3699 55
KA 18 28 512 5889 55
KA 19 28 512 5897 55
KA 20 28 512 5934 55
L 100 28 513 8719 57
L 1004 28 513 8057 57
L 200 28 513 8151 58
L 2004 28 513 8365 58
L 2114 28 513 8349 58
L 300 28 513 8554 58
L 3004 28 513 8427 58
L 310 28 513 8468 58
L 3104 28 513 8484 58
L 350 28 513 8143 58
L 3504 28 513 8127 58
L 400 28 513 8727 57
L 4004 28 513 8032 57
L 401 28 513 8098 57
L 4014 28 513 8008 57
L 420 28 513 8587 58
L 4204 28 513 8608 58
L 430 28 513 8184 59
L 4304 28 513 8168 59
L 4619 28 513 8373 59
L 4643 28 513 8357 59
L 4648 28 513 8784 59
L 4655 28 513 8673 57
L 4660 28 513 8381 59
L 4690 28 513 8398 57
L 4691 28 513 8205 57
L 4694 28 513 8213 57
L 4697 28 513 8221 57
L 4698 28 513 8192 57
L 4790 28 513 8402 57
L 4794 28 513 8246 57
L 4796 28 513 8254 57
L 4798 28 513 8238 57
L 4799 28 513 8262 57
L 4804 28 513 9012 58
L 5014 28 513 8324 58
L 5024 28 513 8316 58
L 5034 28 513 8308 58
L 510 28 513 8538 59
L 5104 28 513 8295 59
L 6708 28 513 8513 59
L 6795 28 513 8681 57
L 687 28 513 8102 57
L 6874 28 513 8016 57
L 700 28 513 8735 57
L 7004 28 513 8049 57
L 918 28 513 8119 57
L 9184 28 513 8024 57
LC 1004 K 28 513 9201 57
LC 4004 K 28 513 9148 57
LC 7004 K 28 513 9172 57
LF 906 28 513 8616 59
LF 990 28 512 6503 59
LF 991 28 512 6511 59
LF 992 28 512 6528 59
LF 995 28 512 6293 59
LF 999/Set 28 512 6174 59
LF 1000/Set 28 512 6166 59
LF 1024K 28 513 6907 59
OX 060 28 513 8287 59
OX 928 28 512 6285 56
OX 929 28 512 6277 56
SMEK-18/05 28 512 9739 54
SMEK-18/10 28 512 9755 54
SMEK-19/05 28 512 9747 54
SMEK-19/10 28 512 9763 54
SMEK-20/05 28 512 9899 54
SMEK-B 28 512 9677 55
SMEK-GB 28 512 3317 55
SMEK-S 28 512 9685 55
VP6-18/05 28 512 9833 54
VP6-19/05 28 512 9841 54
VP6-B 28 512 9644 55
Z 501 28 512 3193 56
Z 515 28 512 3271 55
Indextype no. order no. page type no. order no. page type no. order no. page type no. order no. page