product catalog - dental masters...smileloc ® the smileloc® is made from nitinol which is a...
TRANSCRIPT
Product Catalog
CH1: The Smileloc Abutment System
CH2: Component ReferenceList
The Technology
Smileloc®
Single and Bridge Abutments
Multi-Unit Abutments
Smilekey®
Space Requirements
Regular Components
Wide Components
Multi-Unit Components
Lab Components
4
5
6
7
8
9
16
17
18
20
11
12
13
14
3 15
10
Content
CH3: Multi-Unit Abutment List
Regular Abutments
Wide Abutments
Multi-Unit Abutments for Nobel Internal Conical
Multi-Unit Abutments for Straumann Bone Level
Multi-Unit Abutments for Neodent Cone Morse
19
CH1
The RODO® Abutment System
Smileloc® technology brings an innovative cement and screw-free retrievable solution to implant dentistry. Using Smileloc®, clinicians have predictable control over occlusion and retrievability of the restoration while eliminating the screw access hole and the potential for residual cement.
The Technology
STEP 1
Place RODO® AbutmentCompatible with major implant systems.
STEP 2
Try-in CrownConfirm color, contours, emergence profile, interproximal contacts and occlusion.
STEP 3
Seat Smileloc®
Inner Smileloc arms engage the abutment.
STEP 4
Place the CrownOuter Smileloc arms engage the inside of the coping, securing the crown onto the abutment. There is no cement cleanup, and no screw access hole to fill.
Product Catalog I 4
Smileloc®
The Smileloc® is made from nitinol which is a commonly used material in the medical industry. The unique “memory” characteristics of this alloy initiates reshaping of the Smileloc® when heat is applied. The Smileloc® is delivered in a “locked” position with its eight arms (four inner and four outer) ready for placement on the abutment for final seating of the restoration. When positioned with Smileloc Seater, the four inner arms of the Smileloc® lock under the top of the abutment while the four outer arms lock the coping of the crown in place.
Locked Smileloc® Unlocked Smileloc®
Outer Arms Inner Arms All Arms Collapsed
Product Catalog I 5
CHAPTER ONE | RODO® ABUTMENT SYSTEM
Single/Bridge Abutments
The RODO® abutments for single-tooth and bridge restorations are available in two sizes; Regular (5.5mm) and Wide (6.5mm).
Regular RODO Abutment
Placement of this abutment will require the use of the RODO Abutment Socket Driver.
Wide RODO Abutment
Placement of this abutment will require the use of the Torx T6 Abutment Driver.
5.5 mm 6.5 mm
Smileloc undercutRegular Smileloc Interface(Does Not Change)
Wide Smileloc Interface(Does Not Change)
Implant Interface(implant connection type and gingiva heights vary)
Implant Interface(implant connection type and gingiva heights vary)
Coping Engaging Feature
Seal
Engaging Implant Interface
Abutment Screw provided with Abutment as an Assembly
Abutment Driver Feature
3.6 mm 3.6 mm
Smileloc undercutAbutment Screw
Coping Engaging Feature
Seal
Engaging Implant Interface
CHAPTER ONE | RODO® ABUTMENT SYSTEM
Product Catalog I 6
Multi-Unit Abutments
Straight RODO Abutment
Placement of this abutment will require the use of the RODO Abutment Socket Driver.
Angled RODO Abutment
Placement of this abutment will require the use of the RODO Abutment Socket Driver.
5.5 mm
5.5 mm
Regular Smileloc Interface(Does Not Change)
Non-Engaging Implant Interface
Abutment Screw provided with Abutment as an Assembly
Smileloc undercut Abutment
Driver Feature
Non-Engaging Coping Feature
Seal
3.6 mm
3.6 mm
Abutment Screw
5.5 mm
3.6 mm
Implant Interface(implant connection type, angulation and gingiva heights vary)
17° Angulation 30° Angulation
Regular Smileloc Interface(Does Not Change)
Implant Interface(implant connection type, angulation and gingiva heights vary)
The RODO® abutments for multi-unit restorations are available in straight and angled configurations; 17° and 30°.
CHAPTER ONE | RODO® ABUTMENT SYSTEM
Product Catalog I 7
Smilekey®
The Smilekey® is used to remove prostheses retained by the Smileloc® without occlusal holes or damaging the prostheses. The Smilekey® unlocks the Smileloc® by delivering energy (heat) for a preset time causing the Smileloc® to reach its designated activation temperature. Smilekey® is provided non-sterile and contains rechargeable lithium battery.
CHAPTER ONE | RODO® ABUTMENT SYSTEM
Product Catalog I 8
• Minimum interproximal width in the edentulous space:o Regular - S Coping: 7.4mm ideally 7.9mmo Regular Coping: 8.0mm ideally 8.6mmo Wide Coping: 9.0mm ideally 9.6mm
• Implant can be angled up to 10 degrees off the interproximal surfaces of the adjacent teeth.• A minimum vertical space of 7mm from the top of the implant to the plane of occlusion is required for Zirconia or Emax crowns, unless, a
metal occlusal is desired. Reference vertical heights of copings above.
Space Requirements
6.5 mm5.5 mm5.5 mm
7.6 mm6.6 mm5.9 mm
9.6 mm8.6 mm7.9 mm
WideRegularRegular - SOptimal Interproximal Space
Combined Diameter of Abutment and Coping
RODO Abutment Diameter
4.2 mm
5.9 mm
4.2 mm
6.7 mm
4.2 mm
7.8 mm
CHAPTER ONE | RODO® ABUTMENT SYSTEM
Product Catalog I 9
CH2
Component Reference List
Product Regular Smileloc Regular Smileloc – Extended Range
(ER)
Regular Ti Coping
Engaging - S
Regular Ti Coping
Engaging
Regular Ti Coping for
Bridge
Regular Smileloc Seater*
Regular Seal
Seater
Abutment Socket Driver –
Short*
Abutment Socket Driver –
Medium* Nobel
Driver Adapter* Straumann
Driver Adapter* Regular
Abutment Seal* (10pk)
Image
Model No. 1.502 1.503 6.303 6.301 6.302 80.501 110.301 90.003 90.002 TORQ-ADAP-NOBEL TORQ-ADAP-ITI 20.001
CHAPTER TWO | COMPONENT REFERENCE LIST
Regular Components
* Also Used on Mutli-Unit RODO Abutment System
Product Catalog I 11
Product Wide Smileloc Wide Smileloc – Extended Range
(ER)
Wide Ti Coping
Engaging
Wide Ti Coping for
Bridge
Wide Smileloc Seater
WideSeal
Seater
Torx T6 Driver – Short
Torx T6Driver – Medium
Nobel Driver Adapter
Straumann Driver Adapter
Wide Abutment Seal (10pk)
Image
Model No. 1.401 1.402 6.401 6.402 80.401 110.401 ITIS ITIL TORQ-ADAP-NOBEL TORQ-ADAP-ITI 20.502
Wide Components
CHAPTER TWO | COMPONENT REFERENCE LIST
Product Catalog I 12
Regular Smileloc – Extended Range
(ER)
Regular Multi-Unit Tall Ti Coping
Regular Multi-Unit Short Ti Coping for
Bar
Regular Multi-Unit Impression Coping
Regular Multi-Unit Healing Cap
Regular Multi-Unit Abutment Analog
Multi-Unit Seal Seater
Short Accessory Screw
2mm (5pk)
Medium Accessory Screw
10mm (5pk)
Long Accessory Screw
18mm (5pk)
1.503 6.511 6.521 3.501 4.501 5.501 110.501 140.501 140.502 140.503
Multi-Unit Components
Product
Image
Model No.
CHAPTER TWO | COMPONENT REFERENCE LIST
Product Catalog I 13
RegularArm Setter & Pin
Access HoleFixture & Drill
Lab Sleeve
50.501 50.401 60.501 8.501
Lab Components
Product
Image
Model No.
WideArm Setter & Pin
CHAPTER TWO | COMPONENT REFERENCE LIST
Product Catalog I 14
CH3
Abutment Reference List
Abutment, Straight - 1.0mm GH
Abutment, Straight - 1.0mm GH
Abutment, Straight - 2.0mm GH
Abutment, Straight - 2.0mm GH
Abutment, Straight - 3.0mm GH
Abutment, Straight - 3.0mm GH
5.5
5.5
5.5
5.5
5.5
5.5
Regular Abutments
Product Image Model NumberØ
30010NBA321
30010STB221
30020NBA321
30020STB221
30030NBA321
30030STB221
FOR NOBEL INTERNAL CONICAL RP
FOR STRAUMANN BONE LEVEL RC
3 PRODUCT REFERENCE LIST
NAM LIT-04 Rev. A 2017-07 18
Regular Smileloc Abutments
Nobel Internal Conical RP - Compatible
Straumann Bone Level RC - Compatible
3 PRODUCT REFERENCE LIST
NAM LIT-04 Rev. A 2017-07 18
Regular Smileloc Abutments
Nobel Internal Conical RP - Compatible
Straumann Bone Level RC - Compatible
CHAPTER THREE | ABUTMENT REFERENCE LIST
Product Catalog I 16
Abutment, Straight - 1.0mm GH
Abutment, Straight - 1.0mm GH
Abutment, Straight - 1.0mm GH
Abutment, Straight - 2.0mm GH
Abutment, Straight - 2.0mm GH
Abutment, Straight - 2.0mm GH
Abutment, Straight - 3.0mm GH
Abutment, Straight - 3.0mm GH
Abutment, Straight - 3.0mm GH
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
Product Image Model NumberØ
40010NBA321
40010NBA421
40010STB221
40020NBA321
40020NBA421
40020STB221
40030NBA321
40030NBA421
40030STB221
FOR NOBEL INTERNAL CONICAL RP
FOR NOBEL INTERNAL CONICAL WP
FOR STRAUMANN BONE LEVEL RC
3 PRODUCT REFERENCE LIST
NAM LIT-04 Rev. A 2017-07 19
Wide Smileloc Abutments
Straumann Bone Level RC - Compatible
Nobel Internal Conical RP - Compatible
Nobel Internal Conical WP - Compatible
3 PRODUCT REFERENCE LIST
NAM LIT-04 Rev. A 2017-07 19
Wide Smileloc Abutments
Straumann Bone Level RC - Compatible
Nobel Internal Conical RP - Compatible
Nobel Internal Conical WP - Compatible
3 PRODUCT REFERENCE LIST
NAM LIT-04 Rev. A 2017-07 19
Wide Smileloc Abutments
Straumann Bone Level RC - Compatible
Nobel Internal Conical RP - Compatible
Nobel Internal Conical WP - Compatible
Wide Abutments
Product Catalog I 17
CHAPTER THREE | ABUTMENT REFERENCE LIST
Ø
FOR NOBEL INTERNAL CONICAL
NP
FOR NOBEL INTERNAL CONICAL
RP
FOR NOBEL INTERNAL CONICAL
WP
Abutment, Straight - 1.5mm GH 5.5 50015NBA221 50015NBA321 50015NBA421
Abutment, Straight - 2.5mm GH 5.5 50025NBA221 50025NBA321 50025NBA421
Abutment, Straight - 3.5mm GH 5.5 50035NBA221 50035NBA321 50035NBA421
Abutment, Angled 17° - 2.5mm GH 5.5 51725NBA221 51725NBA321 51725NBA421
Abutment, Angled 17° - 3.5mm GH 5.5 51735NBA221 51735NBA321 51735NBA421
Abutment, Angled 30° - 3.5mm GH 5.5 53035NBA221 53035NBA321
Abutment, Angled 30° - 4.5mm GH 5.5 53045NBA221 53045NBA321
Image Model Number Model Number Model Number
Multi-Unit Abutments for Nobel Internal Conical
Product
Product Catalog I 18
CHAPTER THREE | ABUTMENT REFERENCE LIST
Ø
FOR STRAUMANN
BONE LEVEL RC
Abutment, Straight - 1.5mm GH 5.5 50015STB121 50015STB221
Abutment, Straight - 2.5mm GH 5.5 50025STB121 50025STB221
Abutment, Straight – 4.0mm GH 5.5 50040STB121 50040STB221
Abutment, Angled 17° - 2.5mm GH TYPE A 5.5 51725STB12A1 51725STB22A1
Abutment, Angled 17° - 2.5mm GH TYPE B 5.5 51725STB12B1 51725STB22B1
Abutment, Angled 17° - 4.0mm GH TYPE A 5.5 51740STB12A1 51740STB22A1
Abutment, Angled 17° - 4.0mm GH TYPE B 5.5 51740STB12B1 51740STB22B1
Abutment, Angled 30° - 2.5mm GH TYPE A 5.5 53025STB12A1 53025STB22A1
Abutment, Angled 30° - 2.5mm GH TYPE B 5.5 53025STB12B1 53025STB22B1
Abutment, Angled 30° - 4.0mm GH TYPE A 5.5 53040STB12A1 53040STB22A1
Abutment, Angled 30° - 4.0mm GH TYPE B 5.5 53040STB12B1 53040STB22B1
Product Image Model Number Model Number
Multi-Unit Abutments for Straumann Bone Level
Product Catalog I 19
CHAPTER THREE | ABUTMENT REFERENCE LIST
FOR STRAUMANN
BONE LEVEL NC
Product Ø
FOR NEODENT CONE MORSE (CM)
Abutment, Straight – 0.8mm GH 5.5 50008NEC121
Abutment, Straight – 1.5mm GH 5.5 50015NEC121
Abutment, Straight - 3.5mm GH 5.5 50035NEC121
Abutment, Straight - 4.5mm GH 5.5 50045NEC121
Abutment, Straight - 5.5mm GH 5.5 50055NEC121
Abutment, Angled 17° - 3.5mm GH 5.5 51735NEC121
Abutment, Angled 17° - 4.5mm GH 5.5 51745NEC121
Abutment, Angled 17° - 5.5mm GH 5.5 51755NEC121
Abutment, Angled 30° - 3.5mm GH 5.5 53035NEC121
Abutment, Angled 30° - 4.5mm GH 5.5 53045NEC121
Abutment, Angled 30° - 5.5mm GH 5.5 53055NEC121
Multi-Unit Abutments for Neodent Cone Morse
Model NumberImage
Product Catalog I 20
CHAPTER THREE | ABUTMENT REFERENCE LIST
RODO Medical Inc. 6399 San Ignacio Ave., Suite 100 San Jose, CA 95119 www.rodomedical.com I [email protected] I 408.245.7636