product-catalog pth products 2016 · first crushing stage with four tungsten carbide counterblow...
TRANSCRIPT
PRODUCT-CATALOG
PTH PRODUCTS 2016
PTH Products Maschinenbau GmbHLechen 14A-8692 Neuberg/Mürz • Austriaphone: +43 3857 80530-0fax: +43 3857 80530-4e-mail: [email protected]
www.pthproducts.com
www.pthproducts.com [email protected]
NOTES
www.pthproducts.com
TABLE OF CONTENT
PTH Process and method engineering.............................................. 4
PTH Ripper ....................................................................................... 8
PTH Crusher 2500........................................................................... 10 Optional extras PTH Crusher 2500HD .....................................11 Optional extras PTH Crusher - explanation ............................ 13PTH Crusher 2000 HD .................................................................... 14 Optional extras PTH Crusher 2000HD .................................... 15PTH Crusher 250 Spezial ................................................................ 16 Optional extras PTH Crusher 250 Spezial .............................. 17PTH Crusher 200 Spezial ............................................................... 18 Optional extras PTH Crusher 200 Spezial .............................. 19PTH ECO Crusher ......................................................................... 20
PTH Multi Crusher 1800 .................................................................. 21 Optional extras Multi Crusher 1800......................................... 22
PTH Speed Grader G2 .................................................................... 25 Optional extras Speed Grader G2 .......................................... 26PTH Speedy .................................................................................... 27 Optional extras Speedy .......................................................... 28PTH Speedy light............................................................................. 29 Optional extras Speedy light .................................................. 30
PTH Compactor ............................................................................... 31
PTH Micro Crusher MC-900 ............................................................ 33PTH Micro Crusher MC-1150 .......................................................... 33PTH Micro Crusher MC-1400 .......................................................... 33
PTH Hymog E331............................................................................ 35 Optional extras Hymog E331 ................................................. 36
PTH WSF 400 & 700 ...................................................................... 43
PTH aBr 600 .................................................................................... 45
PTH Ripper:Loosen the damaged road surfacedown to a maximum depth of600 mm / 24 Inches or accordingto demand
Step1
Process andmethod engineering
www.pthproducts.com
PTH Crusher:Crushing (Pulverizing) andmixing of the material according to a predefi ned or desired size(Mod. PTH Crusher 2500 HD)
Step2
Beschreibung der Prozess- und Verfahrenstechnik für die um-weltschonende Straßensanierung mit PTH Products MaschinenBeschreibung der Prozess- und Verfahrenstechnik für die um-weltschonende Straßensanierung mit PTH Products Maschinen
www.pthproducts.com
PTH Speed Grader:Shape the road profi le with the PTH Speed Grader G2 or PTH Speedy Grader
Step3
www.pthproducts.com
PTH Compactor:Compact the shaped road profi le with the PTH Compactor
Step4
www.pthproducts.com
The PTH Ripper is a Ripper, which is used to break up road surfaces up to a depth of 60 cm. Through the special kinematics of the tines, stones are twisted out of the ground. In this manner, the prepared subsurface can be processed with considerably less effort by our robust stone crushers (PTH Crusher) into substance that can be graded. The rugged construction of the PTH Ripper is often applied to break up compacted soil in construction & agriculture. The spring-loaded release mechanism helps to release sudden load on the tractor during unexpectedly high resistance.
Facts & Features: • Complete frame mould construction • 7 tine arms interchangeable with excavator teeth (CATSystem) • Special release mechanism for lifting out stones • Specially cast and prepared swing mount • Reinforced screw springs for wear-free work • Integrated toolbox
Technical Data: Tare weight: 1,400 kg Length: 2.50 m Width: 2.30 m Number of tines/teeth: 7 Operational depth: up to 60 cm power requirement min.: 88 kW (120 HP) Optional extras PTH Ripper Lighting equipment: front LED attachment Level guidance
Ripper
www.pthproducts.com
PTH
Ripp
er
The stone breakers for heavy-duty operations. Professional quality in technology and tenability.For more than 20 years now, PTH Products Machinery has been involved in the construction and development of rock crushers suitable for mobile use. The results speak for themselves. PTH Crushers of all sizes and types are used around the globe and accomplish the toughest tasks. From forest roads in Austria, agricultural land in the United States or the demolition of concrete roads in China - we are there! PTH machines are always front-runners when it comes to durability, performance and effi ciency.
The PTH Crusher 2500 HD is the leader of the premium class. Rotor mass, tungsten carbide and Hardox – 3 facts which make this machine unbeatable! Facts & Features: • Stone breaker with 2500 mm operating width • Rotor giving extra strong performance • 32 piece tungsten carbide tool kit • Replaceable 20 mm Hardox inner facing (bolted on) • First crushing stage (hydraulically adjustable) • Counterblow bar, with four Hardox 400 rails - (individually replaceable) • 1 universal drive shaft • Gear box with integrated freewheel mechanism
Technical Data: Tare weight: 6.500 kg / 14.330 Pound Rotor weight: 1.500 kg / 3306 Pound Operation width: 2.500 mm / 98.4 Inches Operation depth: 250 mm / 9.8 Inches – Version RS: 350 mm / 13.7 Inches Required HP: min. 185 kW (250 HP) Throughput capacity: up to 600 m³ / 21.188 cubic foot per hour
Crusher 2500HD
10www.pthproducts.com [email protected]
PTH
Crus
her
11www.pthproducts.com [email protected]
Crusher 2500HD
Optional extras PTH Crusher 2500HD
wear protection for cover 2500 HD
First crushing stage with four tungsten carbide counterblow bars
Second crushing stage for cover with four Hardox rails
Third crushing stage for cover 2500HD
Third crushing stage hydraulically adjustable (split tail gate) (only for Crusher 250 / 200 Spezial or RS version available)
Special rotor wear protection 2500HD (only available ex works, cannot be retrofi tted)
On-board tool kit
LED lighting equipment back (only ex works)
Additional charge for wear protection plate with tungsten carbide metal
Water injection system for dust prevention and cooling
Additional charge for RS version
Forest Frame
The PTH Crusher models are also available in the RS (rotor special) version. The uniqueness of theRS variant lies in the protruding rotor and the chisel fi tting on the side of the rotor, enabling asurface milling of up to 110 mm without ripping.
Especially in highly compacted surfaces or quick-surface renovations, the RS version out-classescompetition with its strength. Thanks to the massive PTH tools, wear is restricted to a minimumdespite the comparatively high processing speeds. The Crusher RS Series begins with a minimumoutput of 120 hp upwards and is therefore ideally suited for small agricultural operations. For largeundertakings and service providers, the Crusher RS HD variant with 270 hp upwards is available.
Special requests outside the current Crusher product range are dealt with by the engineeringservices of PTH PRODUCTS. Whether you require excess width or a special paint fi nish - you arealways in good hands with our technicians.
PTH
Crus
her
13www.pthproducts.com [email protected]
Optional extras PTH Crusher - explanation
Crusher
First crushing stage with four tungsten carbide counterblow bars
PTH Crusher version RS with projected rotor for deep level crushing without pre-work or surface crushing on extreme hard materialsuch as cobblestone streets or asphalt.All PTH Crushers are available as RS version for additional charge according to individual model.
On board tool kit – also includes extraction tool (not shown) which enables a quick and easy replacement of crushing hammers
Second & third crushing stage & wear protection
Split tailgate for hydraulically adjustment of 3rd crushing stage.This option is an advanced possibility for material fi ne adjustment.
Wear protection plate with tungsten carbide metal and extra rotor wear protection (welding-on of wear layer and tool holder with tungsten carbide instead of protection welding)
PTH
Crus
her
The stone breaker for heavy work – 2,00 m operating width – same premium class advantages as the 2500HD.We offer the PTH Crusher in several models - designed to suit your specifi c needs. For construction sites with hard rocks, such as granite and gneiss, we recommend the HD version of the PTH Crusher 2000 with the ad-ditional rotor wear protection - refl ecting our vast experience. Thus, the PTH Crusher 2000HD is equipped for the toughest applications. Its working width is 2 meters!
Facts & Features: • Stone breaker with 2000 mm operating width • Extra-strong rotor model • 24-piece tungsten carbide tool kit • Replaceable 20 mm Hardox inner cladding (screwed on sections) • First crushing stage (hydraulically adjustable) • counterblow bar, with three Hardox 400 rails - (individually replaceable) • 1 universal drive shaft • Gear box with integrated freewheel mechanism
Technical data: Construction: Highly robust Crusher in whole-frame construction torsion-free and made of high-grade steels Drive: 12 high-performance V-belts on both sides Tare weight: 5.650 kg / 12.456 Pound Rotor mass: 1.100 kg / 2.425 Pound Working width: 2.000 mm / 78.7 Inches Operation depth: 250 mm / 9.8 Inches Version RS: 350 mm / 13.7 Inches Power requirement: at least 220 hp Theoretical throughput capacity: up to a max. of 450 m³ / 15.891 cubic foot per hour 1st crushing stage hydraulically adjustable: 10 - 70 mm Replaceable internal wear and tear parts with a few simple steps
Crusher 2000HD
14www.pthproducts.com [email protected]
PTH
Crus
her
www.pthproducts.com [email protected]
Crusher 2000HD
15
Optional extras PTH Crusher 2000HD
Wear protection for cover 2000HD
First crushing stage 2000HD with three carbide counter blow bars
Second crushing stage for cover 2000 HD with three hardox rails
Third crushing stage for cover 2000HD
Special rotor wear protection 2000HD (only available ex works, can not be retrofi tted)
On-board tool kit
Hydraulic lateral adjustment: 30 cm both sides (only available ex works, can not be retrofi tted
Additional charge for tungsten carbide rotor wear protection plates
Water injection system for dust prevention and cooling
Additional charge for RS version
Forest Frame
All PTH Crushers are available as RS (rotor special) type. The difference between the standard andthe RS version is the projected Rotor with a special wear protection on the side of the rotor whatenables surface crushing down to 110 mm / 4.33 Inches without pre-work.
This enables the Crusher to work for example on asphalt roads or extreme hard gravel withoutusing a ripper or excavator in advance.
Maximum operation depth for a PTH Crusher RS version: 350 mm / 13.7 Inches
PTH
Crus
her
A potent power packet with exceptionally performance, however with compact dimensions usable for medium engine-power class tractors. The PTH Crusher 250 Spezial equals the 2500 HD model as far as throughput capacity and working width are concerned, but is designed for lighter tractors and less harsh applications. The best solution for agriculture and road construction with limestone material or asphalt.
Facts & Features: • Stone breaker with 2500 mm operating width • Extra-strong rotor model • 32-piece tungsten carbide tool kit • Replaceable 15 mm Hardox inner cladding (bolted on) • First crushing stage (hydraulically adjustable counterblow bar, with three Hardox 400 rails - individually replaceable) • 1 universal drive shaft • Gear box with integrated freewheel mechanism
Technical data: Tare weight: 4,200 kg / 9,250 Pound Rotor mass: 1,200 kg / 2,450 Pound Operating width: 2,5 m / 98.4 Inches Operation depth: 250 mm / 9.8 Inches – Version RS: 350 mm / 13.7 Inches Power requirement: min. 110 kW (140 hp) max. 180 kW (240 hp) Theoretical throughput: max. 600 m³ / 21.188 cubic foot per hour
Crusher 250 Spezial
16www.pthproducts.com [email protected]
PTH
Crus
her
17www.pthproducts.com [email protected]
Optional extras PTH Crusher 250 Spezial
Wear protection for cover 250 Spezial
First crushing stage with four tungsten carbide counterblow bars
Second crushing stage for cover 250 Spezial - with four Hardox rails
Third crushing stage for cover 250 Spezial (with four Hardox rails)
Third crushing stage hydraulically adjustable (split tail gate) (only for Crusher 250 / 200 Spezial oder RS version available)
Special rotor wear protection 250 Spezial (only available ex works, can not be retrofi tted)
On-board tool kit
LED lighting equipment back (only ex works)
Additional charge for tungsten carbide rotor wear protection plates
Water injection system for dust prevention and cooling
Additional charge for RS version
Forest Frame
All PTH Crushers are available as RS (rotor special) type. The difference between the standard andthe RS version is the projected Rotor with a special wear protection on the side of the rotor whatenables surface crushing down to 110 mm / 4.33 Inches without pre-work.This enables the Crusher to work for example on asphalt roads or extreme hard gravelwithout using a ripper or excavator in advance.
Maximum operation depth for a PTH Crusher RS version: 350 mm / 13.7 Inches
Crusher 250 Spezial
PTH
Crus
her
The potent powerhouse for small and medium-sized tractors.
The PTH Crusher 200 Spezial equals the 2000 HD model as far as throughput capacity and working width (2 meters) are concerned, but is designed for lighter tractors and less harsh applications such as re-cultivation and rock sizes of all kinds of up to 25 cm.Its strengths lie in the low tare weight and power consumption of only 120 hp or 100 hp in the economic ver-sion with less crushing chamber armourig. The PTH Crusher 200 Spezial is therefore the perfect machine for smaller and medium-sized tractors.
Facts & Features: • Stone breaker with 2000 mm operating width • Extra-strong rotor model • 24-piece tungsten carbide tool kit • Replaceable 15 mm Hardox inner cladding (screwed on sections) • First crushing stage (hydraulically adjustable counterblow bar, with three Hardox 400 rails - individually replaceable) • 1 universal drive shaft • Gear box with integrated freewheel mechanism
Technical data: Tare weight: 3,500 kg / 7,716 Pound Rotor mass: 1,090 kg / 2,403 Pound Operating width: 2 m / 78 Inches Operating depth: 250 mm / 9.8 Inches – Version RS: 350 mm / 13.7 Inches Power requirement: min. 88 kW (120 hp) / 73 kW (100 hp) economic version max. 160 kW (220 hp) Theoretical throughput: max. 520 m³ / 18.363 cubic foot per hour
Crusher 200 Spezial
18www.pthproducts.com [email protected]
PTH
Crus
her
19www.pthproducts.com [email protected]
Optional extras PTH Crusher 200 Spezial
Wear protection for cover 200 Spezial First crushing stage 200 Spezial with three carbide counter blow bars
Second crushing stage for cover 200 Spezial with three hardox rails
Third crushing stage for cover 200 Spezial
Third crushing stage hydraulically adjustable (split tail gate) (only for Crusher 250 / 200 Spezial oder RS version available)
Special rotor wear protection 200 Spezial (only available ex works, cannot be retrofi tted)
On-board tool kit
Additional charge for tungsten carbide rotor wear protection plates
Water injection system for dust prevention and cooling
Additional charge for RS version
Forest Frame
All PTH Crushers are available as RS (rotor special) type. The difference between the standard andthe RS version is the projected Rotor with a special wear protection on the side of the rotor whatenables surface crushing down to 110 mm / 4.33 Inches without pre-work.This enables the Crusher to work for example on asphalt roads or extreme hard gravelwithout using a ripper or excavator in advance.
Maximum operation depth for a PTH Crusher RS version: 350 mm / 13.7 Inches
Crusher 200 Spezial
PTH
Crus
her
Based on the PTH Crusher 200 Special we offer the PTH ECO Crusher 150 which has an effective working width of 1500 mm / 59 Inches and is suitable for tractors from 80 - 120 HP.
The ECO Crusher is ideal for crushing soft type of stones like limestone with an max. cube size of 200 mm / 7.8 Inches as well as harder stones like granite or basalt with an max. cube size of 130 mm / 5 Inches.
Its a machine suitable for smaller Farmers and Forestry as well as for machine sharing communities.
Technical data: Weight: 1500 KG / 3300 Pound Working width: 1500 mm / 59 Inches Working depth: maximum 200 mm / 7.8 Inches Power requirement: minimum 80 HP to maximum 120 HP
ECO Crusher
20www.pthproducts.com [email protected]
PTH
Crus
her
Views of PTH ECO Crusher
The PTH Multi Crusher is a high-performance mobile rock & concrete crusher, is squat, red / grey colored, armored with tungsten carbide, loud as a Boing 777 and powerful enough to pulverize the dolerite stones of the Rocky Mountains with a smile on the operator’s face.
Its powerful poly chain drive train and rotor system with fully armored tool holders is unique on the market and simply to maintain.The weight of 7.500 kg / 16.500 pounds and a sheath of 20 mm thick Hardox crushing chamber armored plates keep the crusher from fl ying off the rocky ground.
The Multi Crusher is a multipurpose talent which allows crushing and milling of the hardest material with one machine. Due to special shaped tool holder protection plates the machine can act as a mixing and homoge-nizing unit also.
Facts & Features: • Stabilization breaker with 1800 mm operating width • Extra-strong rotor model with 1300 mm diameter • 48-piece tungsten carbide tool kit • Replaceable 20 mm Hardox inner cladding (screwed-on sections) for request also 30 mm Hardox • Hydraulically adjustable counterblow bar tipped with tungsten carbide • Rails - individually replaceable • Additional support roller or hydraulically adjustable sliding plates on the rear
Technische Daten: Drive: 2 high-performance Polychains Deadweight: 7.500 kg / 16.500 Pound Working width: 1.800 mm / 71 Inches Working depth: max. 350 mm / 13.7 Inches on tight surfaces (Asphalt, etc…) max. 450 mm / 17.7 Inches on loosen surfaces (Gravel, etc…) Requirements: min. 220 KW / 300 HP Throughput rate: up to 800 m³ / 28.251 cubic foot per hour – depending on working conditions
Multi Crusher 1800
21www.pthproducts.com [email protected]
Mul
ti Cr
ushe
r
22www.pthproducts.com [email protected]
Optional extras PTH Multi Crusher
Water injection system incl. pump and electric fl ow rate control
Manual water injection system for dust prevention and cooling
Automatical depth guidance controlled by PTHtronic
Multi Crusher
View all open
View CB1 closed
View tailgate open
View 1
View CB1 and CB2 closed
PTH Multi Crusher Design 2016
Mul
ti Cr
ushe
r
CB = counterblow bar
www.pthproducts.com [email protected]
Speed Grader G2
25
Highly fl exible state-of-the-art grader that can be fi tted to a wide range of carrier vehicles (tractors, wheel loa-der, Unimog, truck, digger ...).Proper road maintenance contributes to reliable transport at reduced cost, as there is a direct link between road condition and vehicle operating costs. An improperly maintained road can also represent an increased safety hazard to the user, leading to more accidents, with their associated human and property costs.The PTH Speed Grader G2 with its functionality and fl exibility is under consideration of its costperformance ratio in any way the better choice compared to a commercial motor grader. For road construction companies this machine is the perfect solution.
Facts & Features: • Rugged complete-framework-construction • Frame steering with 45° steering lock • Heavy-duty front axle • Wheels 360° slewable • Rotating assembly with twin ball bearing • Hydraulic lifting cylinder • Removable wear-bar • Gather wear protection sidewise • Can Bus Controlling PTH Tronic Technical data: Tare weight: 4,500 kg / 9,920 Pound Even blade tilt: 48° Height: 2,320 mm / 92 Inches Even blade inclination: +/- 82° Width: 3,600 mm / 141 Inches Operating pressure: 210 bar (8-21 Mpa) Length: 5,650 mm / 222 Inches Power requirement Tractor: min. 95 KW / 130 HP Even blade width: 3,600 mm / 141 Inches Power requirement Loader: + 6,000 kg / 13,227 Pound Even blade lift: 550 mm / 22 Inches
Spee
d G
rade
r
26www.pthproducts.com [email protected]
Optional extras PTH Speed Grader G2
Hydraulic power steering assist
Front plate Speed Grader G2
Adapter kit for Trimle or Leica laser automatic incl. software for PTH-tronic, without control unit Adapterplate Speed Grader G2 for towing vehicle
Mounting on and training without travel expenses
Cutter bit rail
Speed Grader G2
Easy transport without truck
Spee
d G
rade
r
www.pthproducts.com [email protected]
The PTH Speedy Grader continues its reputation for offering premium quality and controls, advanced elec-tronics and hydraulics solutions for highest productivity - High quality in every aspect. Small graders like the PTH Speedy, which are suffi cient for many grading jobs, are usually mounted on carrier vehicles between 80 and 150 HP. A grader of this compact size can be used for work in driveways, some road maintenance, land-scaping, and smaller-scale parking lot projects. The benefi t of the PTH Speedy is its maneuverability in tight spaces.The bigger brother, the PTH Speed Grader G2, is used for similar road maintenance and rural road projects, but on a larger scale.
Facts & Features: • Heavy-duty frontaxle • Wheels 360° slewable • Rotating assembly with twin ball bearing • Removeable wear-bar • Gather wear protection sidewise • Can Bus Controlling PTH Tronic • Hydraulic systems: Sauer Danfoss eightfold control valve with LS or fi xed displacement pump, required amount of oil min. 30 l /minute; operating pressure 200 bar • Equipped with fl ange plate for bracket work table
Technical Data: Tare weight: 2.000 kg / 4406 Pound High: 2.000 mm / 78 Inches Width: 2.160 mm / 85 Inches Length: 3.980 mm / 156 Inches Cutter length: 2.400-3.000 mm / 94.5 – 118 Inches Cutting angle adjustment: 45° Power requirements tractor: min. 66 KW / 90 HP Power requirements loader: min. 3000 kg / 6,613 Pound
Speedy
27
Spee
d G
rade
r
Electronic system:• Can Bus control system 12 V• PTH-tronic with speed adjustment for lifting and slewing device• Trouble check system• One-handle control system with PTH joystick• Emergency switch mounted beside joystick• Cable sets for mounting (on demand for multiple vehicle installation)
28www.pthproducts.com [email protected]
Optional extras PTH Speedy
Hydraulic power steering assist
Front plate with Can Bus extension module
Frame lift cylinder with Can Bus extension mudule
Adapter kit for Trimle or Leica laser automatic incl. Software for PTH-tronic,without control unit
Adapter plate PTH Speedy for towing vehicle
Mounting on and training without travel expenses
Cutter bit rail
Speedy
Spee
d G
rade
r
www.pthproducts.com [email protected]
The PTH Speedy light is a fl exible and highly modern towing grader, which can universally be mounted onto various carrier vehicles such as tractors, wheel loaders, Unimogs, trucks or excavators quickly and easily. Beside the functional design the PTH Speedy light impresses with its precision and agility with which it easily by-passes obstacles. All functions are controlled with a single joystick or, in the low cost version, via the hyd-raulic couplings of the carrier vehicle (min. 4 needed).
Electronic system: • Can Bus control system 12 V • PTH-tronic with speed adjustment for lifting and slewing device • Trouble check system • One-handle control system with PTH joystick • Emergency switch mounted beside joystick • Cable sets for mounting (on demand for multiple vehicle installation)
Technical Data: Tare weight: 1.500 kg / 3306 Pound High: 2.000 mm / 78 Inches Width: 2.160 mm / 85 Inches Length: 3.980 mm / 156 Inches Cutter length: 2.400-3.000 mm / 94.5 – 118 Inches Cutting angle adjustment: 45° Power requirements tractor: min. 66 KW / 90 HP Power requirements loader: min. 2500 kg / 5,511 Pound
Speedy light
29
Spee
d G
rade
r
30www.pthproducts.com [email protected]
Optional extras PTH Speedy light
Steering axle
CAN Bus Control System (PTH-tronic)
Speedy light
Spee
d G
rade
r
www.pthproducts.com [email protected]
Excellent equipment is a key element in road construction and rural road maintenance. One key piece of equipment for almost all jobs is the PTH 3-plate compactor.
The PTH Compactor can be used to compact sub base and gravel on driveways, rural roads and other com-pacting jobs. Further the PTH Compactor is also useful in confi ned areas where a larger roller may not be able reach. When it comes to selecting the right plate compactor, contractors have a few options to consider – the PTH Compactor is most likely the best one!
Blower drive: • Closed on board hydraulic system with integrated hydraulic components • Big hydraulic tank, 95 litres • Oil cooler with exhauster and sheet metal covering • Drive system with 3 hydraulic pumps, works over drive shaft • Parallel connected hydraulic motors • Pressure control valve 200 bar
Technical data: Weight: 2660 kg / 5864 Pound Working width: 2550 mm / 100 Inches Mounting: 3-point KAT 3 Hydraulic motor: gear wheel Centrifugal force: 3 x 75 kN Oscillation: 30 - 55 Hz Amplitude: 2.12 mm Compaction depth: 10 - 55 cm Lateral adjustment: left/right 300 mm / 11.8 Inches
Compactor
31
PTH
Com
pact
or
www.pthproducts.com [email protected]
PTH Micro Crusher MC-900 Facts & Features: • Robust frame construction • 880 mm / 34 Inch working width • 28 pcs tools with carbide metal - exchangeable • Counter blow bar mechanical adjustable • 270 mm /10.6 Inch rotor diameter • Tooth belt drive both sides
Technical Data: Dead weight: 220 kg / 485 Pound
Working width: 880 mm / 34 Inches
Working depth: max. 150 mm / 6 Inch
Power requirement: min 15 kW (20 HP)
Micro Crusher
33
PTH Micro Crusher MC-1150
• Robust frame construction• 1120 mm / 44 Inch working width• 36 pcs tools with carbide metal - exchangeable• Counter blow bar mechanical adjustable• 270 mm /10.6 Inch rotor diameter• Tooth belt drive both sides
280 kg / 618 Pound
1120 mm / 44 Inches
es max. 150 mm / 6 Inches
min. 22 kW (30 HP)
PTH Micro Crusher MC-1400
• Robust frame construction• 1380 mm / 54.3 Inch working width• 44 pcs tools with carbide metal - exchangeable• Counter blow bar mechanical adjustable• 270 mm /10.6 Inch rotor diameter• Tooth belt drive both sides
320 kg / 706 Pound
1380 mm / 54.3 Inches
max. 150 mm / 6 Inches
min. 22 kW (30 HP)
Mic
ro C
rush
er
Hydraulic or Electric Tail Gate Open /Close Mechanism
Micro Crusher
www.pthproducts.com [email protected]
It´s not only sheer size that counts – Technology is the fundament for qualityPTH Micro Crusher Series - Crush and recycle stones up to 100 mm / 4 Inches diameter witha compact tractor, remote controlled carrier vehicle or skid steer loader
The little stone crusher series PTH Micro Crusher clears land from stones, no matter whether for agricultural land as a step of land reclamation, for the maintenance of public parks or children´s playgrounds, or for private garden clearing and small construction site preparation.An extra strong frame for a very long life with reinforced wear resistant Hardox steel is standard as well as the 2-side drive train system which is unique in this machine class. Dimensions of the crushed stones are adjustable via a movable coun-terblow bar – same as on the bigger models of PTH Crushers.The rotor with tungsten carbide tipped hammers makes this little stone crusher very effective and ensures a long wear resistance.With an optional mulcher bar and sharp knifes instead of the stone crushing hammers, this unique machine shows also a great performance in home gardens or public parks as a forest mulcher.
Technical requirements for operating a stone crusher on a tractor are creep speeds or automatictransmission and a three-point tractor linkage.
Availableworking width´s:
880 mm / 34 Inches1150 mm / 44 Inches1400 mm / 54.3 Inches
Mic
ro C
rush
er
www.pthproducts.com [email protected]
The Hybrid-powered equipment carrier
Facts & Features: • Control of the following functions via radio: engine, start-stop, steering, changing the steering varieties, backwards and forwards, lifting device up and down, PTO-shaft on/off, adjust engine speed, lighting on/off (if available), additional control on/off or up/down • Ackermann steering with 35° steering angle • 4-wheel drive • Direct drive of the drive shaft via combustion motor, electromagnetic clutch and manual gear for rpm 1000/540 • Lifting device with a lifting force of 400 kg • Load dependent cruise control • Driving on hillsides up to 4° • Use of very resistant and long-lasting industry components • Mechanical fl oating position of the lifting device
Technical data: Length: 2.450 mm Width: 1.405 mm Height: 950 mm Dead weight: 950 kg Power: 34 HP / 25 KW Diesel engine Propulsion: Permanent electrical drive of all 4 wheels due to 4-wheel hub motors PTO drive: Mechanically powered through Diesel engine, electrical clutch and 2-speed gearbox PTO speeds: 1000rpm, 540 rpm Max. hillside situation: 45° Lifting force: 400 kg Addition: Every equipment with category 0 and 1 Radio range: Up to 300 m Speed: 0-7 km/h with cruise control
Hymog E331
35
PTH
Hym
og
36www.pthproducts.com [email protected]
Optional extras PTH Hymog E331
LED work light 2 Stk. front & rear
Crawler chassis
Connector for 2 additional functions
Auto level for 3-point linkage
Surcharge for rear 3-point linkage
On-board operators seat
Hymog E331
PTH Hymog with track system
PTH
Hym
og
Hymog E331
www.pthproducts.com [email protected]
PTH
Hym
og
Description of technical details PTH Hymog
38www.pthproducts.com [email protected]
Hymog E331
Explanation technical details PTH Hymog
A Front lift system with 400 KG lifting capacity B Battery box C Switch box D Swivel joint E Rollover bar F KAT 0 or KAT 1 arresting hook G Air or air-water fi lled tires H Rear lift system with 400 KG lifting capacity I Electric motors, 4 pcs overall J Loading platform K Load sensing crane system L GPS transmitter/receiver M Trailer with direct drive axle N Trailer tire (optional trailer with caterpillar tracks) O Sample attachment device (anti-fi re gun) P Caterpillar track system Q Various attachment devices for agricultural and municipal services, which can be installed in front or on the rear three-point linkage as well as on top of the machine via connection points integrated in the chassis
Due to the manual data recording method which most of small machine service provider companies use, the process documentation is always based upon past happenings and actions. Considering the implementation of a standardized and computerized process planning and performance monitoring system that is able to read and record automatically generated real-time data of the company’s machine units in action, this would allow more detailed and faster reacting, real-time data processing service blueprint model.
Advantages of such an updated service blueprint model can be seen in terms of: • The overall time frame for internal administration • Planning of service and maintenance tasks of the operating machine units • Key performance indicator evaluation • Cost calculation • Data mining and data administration • Performance management • Controlling
PTH
Hym
og
Hymog E331
www.pthproducts.com [email protected]
The PTH Hymog E331 can be defi ned as a tractor/carrier vehicle for agricultural and municipal machine processing purposes, which is designed according to machine engineering guidelines of remote controlled operating vehicles.
39
PTH
Hym
og
Two different types of control systems are available for the PTH Hymog:• Semi-autonomous driving and operating technology (lane guidance)• Manual supervised remote controlled operation (on board or via direct sight)
The machine can be equipped with special hardware and software, which enables an independent observe position, deciding the moving speed and avoiding obstacles such as people, animals or objects in the fi eld while performing the task.
Furthermore, in terms of all relevant vehicle conditions like engine temperature, fuel consumption, total area processed, etc., performance measurement indicators according to the customer’s demand and other custo-mized data according to the individual task (e.g. grassland mowing, snow blowing, etc.) and demand can be transmitted in real time to a cloud server.
40www.pthproducts.com [email protected]
Hymog E331
Description of hand-held remote control device
The hand-held remote control device used to control motions and functions of the PTH Hymog weighs approximately 3.5 kilograms. It can be either hand-held only or with a belt tight fi t around the hip of a person.
The PTH Hymog can also be operated by a physicallyhandicapped person with a medical degree of disability T6,also known as paraplegia.
The high level of technical equipment allows a handicappedperson to operate a PTH Hymog under the same conditionsand with equal performance compared to a non-handicapped person.
The various possibilities for data mining provided by Industry 4.0 will shape the future basis for the perfor-mance measurement of individuals, business units and companies. Organization processes in small or medi-um-sized companies can be optimized or fully automatized rather than shifting the complete responsibility for daily business to one single person.
The PTH Hymog pushes your business to the next level of industrialization – Industry 4.0
PTH
Hym
og
www.pthproducts.com [email protected]
PTH
WSF
WSF 400 & 700
WSF Stump Grinder The PTH WSF Stump Grinder is available in 2 different versions suitable for small and medium sized tractors. Due to the changeable grinding wheel it is possible to use the WSF as a slitting cutter in stony grounds (example: cable laying). Max. cutting depth 350mm / 14 Inches
PTH WSF 400 for Tractors from 25 - 40 HP PTH WSF 700 for Tractors from 35 - 70 HP
www.pthproducts.com [email protected]
PTH
WSF
WSF 400 & 700
Moveable via Electric Motoror Hydraulic Cylinder
www.pthproducts.com [email protected]
Additional breaking systems
Increase Your Transport Performance Safely with the aBr Systems from PTH Products. The commercial pressure on the transport industry of agricultural goods has been consistently going up in recent years:higher payloads, higher mileages and higher average speeds of the tractors are requested. Engine outputs are continuously increased – a 250 HP tractor can be considered as medium size carrier vehicle.As a result, commercial brakes of tractors are pushed to their limits, doesn´t matter which brand it is. The PTH aBr Systems allow a wear free speed reduction while the food brake remains cold for emergency cases. Facts & Features: • Wear free speed reduction system via a permanent magnetic fi eld • No electric power supply from carrier vehicle needed • Fast & easy to install on standard 3-point linkage or snow plough connection plate • Easy to operate from driver’s cabin • Low-maintenance due to robust design and truck OEM components
For vehicles up to 150 HP PTH abr 600 For vehicles with more than 150 HP PTH abr 1200
Optional extras PTH aBr
Additional standard weight pair (2 x 45 kg) Additional weight mounting bracket right PTH aBr Additional weight mounting bracket left PTH aBr Additional costs for snow plough connection plate PTH aBr Stopcock (aBr 1200 - to switch off one Magnetarder unit) Additional costs for special painting
aBr
45
PTH
aBr
aBr
www.pthproducts.com [email protected]
Moderne Holzernte Zettler
color range forspecial painting
PTH
aBr
PTH Products Maschinenbau GmbHLechen 14A-8692 Neuberg/Mürz • Austriaphone: +43 3857 80530-0fax: +43 3857 80530-4e-mail: [email protected]
www.pthproducts.com