product catalogue - metrodata limited · fc3100/sm sh 80-16-921 fc3200/sm lh 80-16-922 fc4000/mm...

PRODUCT CATALOGUE

communicating solutions

New to the MetroCONNECT Carrier Ethernet Demarcation family; the FCM10G05 supports services up to 10Gbps with all the same features as the 1Gbps variants, including comprehensive Layer-2 & Layer-3 Circuit Activation Testing and In-Service SLA Monitoring.

Contents:

Ethernet Service Delivery Page 2Carrier Ethernet Demarcation Page 4

Network Performance Assurance Page 5

Fibre & Copper Transceivers Page 6

Passive WDM Multiplexers Page 7

Fibre Modems & TAPs Page 8

Media Converters Page 9

Rackmount Page 9

Data Interface Converters Page 10

Multiplexers Page 11

ABOUT METRODATAMetrodata Ltd. is a long-established UK designer and manufacturer of Telecoms Equipment. Based near London, the company has been a supplier to Telecoms Service Providers, Corporate Enterprises and Governmental organisations worldwide since 1989. The company’s products are manufactured in the UK with a strong emphasis on design and production quality, with 100% of production fully tested prior to dispatch.

Metrodata has a particular focus on Interface Conversion, Metro-Edge and Network Access solutions. Our standard portfolio extends from simple ‘plug-and-play’ connectivity products through to Multiplexers and Managed Service Delivery Solutions for the Telecoms Carrier market. Our technology expertise encompasses each of Ethernet, Fibre, SDH/PDH, Asynchronous Transfer Mode (ATM) and Serial networking. Most recently, our ‘MetroCONNECT’ Ethernet Service Demarcation, ‘MetroWAVE’ Transceiver and Optical Multiplexer and ‘NetTESTER’ Test & Monitoring solution families have been at the forefront of both our Development Engineering focus and our Sales growth.

RECENT INTRODUCTIONS!

www.metrodata.co.uk Tel: +44 (0) 1784 744700Fax: +44 (0) 1784 744701

[email protected]

MetroCONNECT - MANAGED ETHERNET SERVICE DELIVERY & CARRIER ETHERNET DEMARCATION

A comprehensive set of tools for Network Performance Assurance, offering cost effective, remotely manageable circuit testing and monitoring for LAN and WAN Ethernet / IP Services.

NetTESTER - NETWORK TEST & MONITORING

MetroWAVE - FIBRE & COPPER TRANSCEIVERS

Over the past few years, network-connected equipment has evolved to use, almost exclusively, ‘pluggable’ fibre transceivers rather than the historic fixed interfaces which were generally soldered directly onto circuit boards.

Metrodata supplies all variants of Fibre and Copper Transceivers, for use both with our own equipmentand third party networking products from all leading vendors.


2

ORDERING INFOPART CODES:

AC PSU DC PSUWC1000 80-05-541 80-21-541

WCM1100 80-70-542 80-71-542

WCM1101 80-70-548 80-71-548

WCM1400 80-70-4542-1 80-71-4542-1

WCM1400BNC 80-70-4572-1 80-71-4572-1

WCM1800 80-70-8542-1 80-71-8542-1

WCM1800BNC 80-70-8572-1 80-71-8572-1

WCM1820 80-70-82542-1 80-71-82542-1

WCM1820BNC 80-70-82572-1 80-71-82572-1

WCM3100 80-70-543 80-71-543

WCM3200 80-70-2543-1 80-71-2543-1

WCM3400 80-70-4543-1 80-71-4543-1

WCM5100 80-70-547 80-71-547

WCM-SERIAL 80-70-545 80-71-545

WC-SERIAL 80-05-545-1 80-21-545-1

LHM1000 80-70-544 80-71-544

LVM2000 80-70-549 80-71-549

The MetroCONNECT WCM and LHM range of managed Ethernet Converters support:LEASED LINES: Clear Channel or Fractional E1/T1, Framed E3/DS3, Framed STM-1/OC-3SERIAL: EIA530, V.35, X.21, RS449, RS232, HSSI

The range offers the following as standard:Carrier Ethernet OAM (802.3ah & 802.1ag)Traffic Prioritisation & Rate LimitingPort Looping and LAN/WAN circuit testingComprehensive Management via Terminal Connection, Telnet & Web InterfaceSSH & TACACS+ For Secure Access

MANAGED ETHERNET DELIVERY

E1/T1 SERVICES

E3/DS3 SERVICES

STM1/OC3 SERVICES

SERIAL SERVICES

WCM5100:ETHERNET EXTENSION OVER RESILIENT STM-1 OR OC-3 SERVICES2x RJ45 PLUS 1x SFP ETHERNET CONNECTIONSGFP ENCAPSULATION WITH VCAT/LCAS, 1x VC4 AND Nx VC3 POINT-TO-POINT/MULTIPOINT TOPOLOGIES SUPPORTED

WC1000:ETHERNET EXTENSION OVER E1/T1 SERVICESWC1000 SUPPORTS BASIC PLUG & PLAY RJ45 ETHERNET AT 10/100NMPSWCM1100 SUPPORTS MANAGED RJ45 & SFP ETHERNET CONNECTIONS AT UP TO 1GBPSWCM1101 SUPPORTS MANAGED RJ45 ETHERNET AT 10/100MBPS

WCM1400: (4 x E1/T1 Ports)


WCM3100: WCM3200: (2 x E3/DS3 Ports)ETHERNET EXTENSION OVER FRAMED E3/DS3 SERVICES2x RJ45 PLUS 1x SFP ETHERNET CONNECTIONSGFP ENCAPSULATION WITH VCAT/LCAS, 1x VC4 AND Nx VC3 POINT-TO-POINT/MULTIPOINT TOPOLOGIES SUPPORTED

WCM-SERIAL MANAGED LAN EXTENSION OVER X.21, V.35, EIA-530 UP TO 20MBPSWC-SERIAL UNMANAGED PLUG ‘N’ PLAY LAN EXTENSION OVER X.21, V.35, EIA-530 UP TO 20MBPSLHM1000 MANAGED LAN EXTENSION OVER HSSI UP TO 52MBPSLVM2000 MANAGED LAN EXTENSION OVER LVDS UP TO 52MBPS

METROCONNECT MANAGED LAN EXTENSION & CPE FAMILY

WCM3400: (4 x E3/DS3 Ports)

ETHERNET EXTENSION OVER MULTIPLE ‘BONDED’ E1 OR T1 SERVICESSUPPORT FOR UP TO 4x, 8x OR 16x ‘BONDED’ E1/T1 SERVICES FOR INCREASED ETHERNET BANDWIDTHRJ45 OR BNC PRESENTATION FOR E1, 2x RJ45 PLUS 1x SFP ETHERNET CONNECTIONSGFP, VCAT/LCAS POINT-TO-POINT AND POINT-TO-MULTIPOINT TOPOLOGIES SUPPORTED

WCM1100:


WCM1101:

WCM-SERIAL: WC-SERIAL: LHM1000: LVM2000:


MANAGED ETHERNET DELIVERY The MetroCONNECT MC12000 platform offers a high density Ethernet Aggregation and Service Delivery solution for fibre or copper distribution from core network to customer sites, at which MetroCONNECT stand alone CPE devices may be deployed.

The MC12000 is a 4U, 19” managed chassis system supporting resilient power supplies and high port density. All modules support hot-swap.

A variety of ‘last mile’ Ethernet service delivery transports and topologies are supported including:


Code

Chassis and single AC PSU 80-16-021-1

Chassis and dual AC PSU 80-16-022-1

Chassis and single DC PSU 80-16-031-1

Chassis and dual DC PSU 80-16-032-1

PSU Blanking Plate 80-16-105

Interface Card Blanking Plate 80-16-107

AC PSU Module 80-16-110-1

DC PSU Module 80-16-115

Spare Management Module 80-16-120-1

Interface Cards

FCC9000 80-16-933

WCC1400 80-16-4542-1

WCC1800 80-16-8542-1

WCC3200 80-16-2543-1

WCC5200 80-16-2547

WCC-Serial 80-16-545-1

FC1000/MM 80-16-910

FC1100/SM SH 80-16-918

FC1200/SM LH 80-16-919

FC3000/MM 80-16-920

FC3100/SM SH 80-16-921

FC3200/SM LH 80-16-922

FC4000/MM 80-16-915

FC4100/SM SH 80-16-916

FC4200/SM LH 80-16-917

3

INTERFACE MODULES

METROCONNECT MC12000 SERVICE DISTRIBUTION CHASSIS

FC3X00 FAMILYE3/DS-3 G.703 ELECTRICAL OVER FIBRE

FC4X00 FAMILYSTM-1/OC-3 ELECTRICAL OVER FIBRE

FC1X00 FAMILYE1 G.703 ELECTRICAL OVER FIBRE

SDH/PDH SERVICE DELIVERY / EXTENSION

WCC1X00 FAMILYETHERNET OVER UP TO 4 OR 8 SEPARATE OR ‘BONDED’ E1/T1 SERVICES

WCC3200ETHERNET OVER 2 SEPARATE OR ‘BONDED’ E3/DS3 SERVICES

WCC5200ETHERNET OVER 2 STM-1/OC-3 SERVICES

WCC-SERIALETHERNET OVER SERIAL-INTERFACED SERVICES

FCC90006-PORT MIXED MEDIA GIGABIT ETHERNET SWITCH OR DUAL MEDIA CONVERTER

ETHERNET SERVICE DELIVERY / EXTENSION

• STM-1/OC-3 • Serial

• Fibre • Clear channel or fractional E1/T1• Framed E3/DS3


4


AC PSU DC PSUFCM9003 80-70-945 80-71-945

FCM9005 80-70-944 80-71-944

FCM9005 Dual AC 80-74-944

FCM10G05 80-70-951 80-71-951

FCM10G05 Dual AC 80-74-951

CARRIER ETHERNET DEMARCATION

FCM9003:2X 100/1000BASET PORTS AND 1X ‘SFP’ PORT WITH FLEXIBLE ‘LAN/WAN’ PORT DEFINITIONV-LAN PUSH/POP FOR SERVICE CONFIGURATION, INCLUDING Q-IN-QCUSTOM ‘METROSAM’ HARDWARE FOR TEST AND REPORTING FUNCTIONSJUMBO FRAME SUPPORT (UP TO 10KBYTE PACKETS)COMPREHENSIVE L2CP TUNNELLING CONTROLMANAGEMENT VIA LOCAL TERMINAL CONNECTION, TELNET/SSH, WEB BROWSER AND SNMPSERVICE ACTIVATION TESTING VIA RFC2544 AND Y.1564, USING LAYER-2 MAC TRAFFIC AND LAYER-3 IP TRAFFICIN-SERVICE MONITORING VIA IEEE802.1AG CFM / ITU-T Y.1731 AND TWAMP-LITE

FCM9005:4X 100/1000BASET & 1X ‘SFP’ LAN PORTS AND 100/1000BASET OR SFP WAN PORTTWO-LEVEL V-LAN PUSH/POP FOR SERVICE CONFIGURATION, INCLUDING Q-IN-QMORE ADVANCED METROSAM ARCHITECTURE SUPPORTING IN-SERVICE FLR MONITORINGDUAL-REDUNDANT AC PSU VARIANTS AVAILABLESERVICE ACTIVATION TESTING VIA RFC2544 AND Y.1564, USING LAYER-2 MAC TRAFFIC AND LAYER-3 IP TRAFFICIN-SERVICE MONITORING VIA IEEE802.1AG CFM / ITU-T Y.1731 AND TWAMP-LITE

Compared with traditional SDH/PDH infrastructures, modern Packet-switched networks are inherently less ‘deterministic’. Telecoms Carriers and Service Providers require not only to provision ‘Carrier Ethernet’ WAN circuits, but to provide comprehensive ‘birth certificate’ details of the end-to-end performance characteristics of their services relative to customer ‘Service Level Agreements’ (SLAs). They may also need to monitor in-service performance to ensure that under differing load conditions, performance does not dip below contracted levels.

Metrodata’s line of cost-effective Carrier Ethernet Demarcation Devices support advanced configuration and management facilities including multi-level VLAN tag push/pop and L2CP (Layer-2 Control Protocol) handling. Comprehensive support for performance assurance protocols include IEEE 801.1ag, ITU-T Y.1731 and TWAMP (Two-Way Active Measurement Protocol). Each of our products include Metrodata’s custom ‘MetroSAM’ (Service Assurance Module) hardware for test traffic generation, packet loopback and traffic analysis, enabling support for high-precision circuit ‘turn-up’ test reporting to standard RFC2544 and ITU-T Y.1564 test profiles, detailing such characteristics as Committed Information Rate (CIR), Packet-Loss Ratio (PLR), Delay (or ‘latency’) and Delay Variation (or ‘jitter’).

Current products include:

FCM10G05ADVANCED ETHERNET DEMARCATION DEVICE FOR 10GBPS SERVICESSFP+ PORTS FOR 10GBPS LAN & WAN CONNECTIONS PLUS ADDITIONAL 1GBPS LAN PORTSSERVICE ACTIVATION TESTING AND IN-SERVICE MONITORING FUNCTIONALITY SIMILAR TO 1GBPS PRODUCTS

CarrierNetwork

SLA

SLA

SLA

Customer Network

Customer Network

Customer Network

Multiple TrafficTypes/Flows

Ethernet Services:E-Line, E-LAN, E-Tree

SLA Determination,Verification, Reporting


NETWORK PERFORMANCE ASSURANCEThe NetTESTER family offers a range of powerful & versatile Ethernet network test and monitoring capabilities for the Enterprise sector. Intended for ‘always-on’ deployment at key points throughout the network, NetTESTER represents a new paradigm in Performance Assurance.

Most frequently deployed at locations throughout a multi-site Wide Area Network, NetTESTER devices may be installed either directly in the ‘data path’, between for example a Service Provider’s WAN termination point and the Enterprise’s own LAN equipment, or simply on any convenient Switch or Router port within the LAN. In the former case, NetTESTER units are fully transparent to user traffic and yet perfectly positioned for test, monitoring and impact analysis applications. In the latter, whilst not directly in the data path between LAN and WAN, NetTESTER is ready ‘on-demand’ for test-traffic generation, loop-back and analysis of traffic performance to/from any other similarly equipped site within the network, and can provide ‘always-on’ background monitoring and alarming in the event of performance degradation relative to pre-defined threshold criteria.

The NT1003, NT1005 (1Gb capable) and NT10G05 (10Gb capable) products (each available with a variety of PSU options for flexibility and resilience), include Metrodata’s custom ‘MetroSAM’ (Service Assurance Module) hardware for test-traffic generation and loop-back, supporting industry-standard test profiles RFC 2544 and ITU-T Y.1564, for both Layer-2 (Ethernet Switched) and Layer-3 (IP Routed) environments. Each device also supports background monitoring via standard protocols including ITU-T Y.1731, for Ethernet Switched environments, and TWAMP (‘Two-way Active Measurement Protocol’), for IP-Routed infrastructures.

Users access the NetTESTER either via a local terminal/emulator, or more normally remotely across the network from a Management console application via Telnet/SSH or Web Browser, to configure and instigate test procedures or to monitor results. In the case of background monitoring, SNMP ‘TRAP’ alarms are issued in the event of a breach of pre-determined performance threshold parameters, including throughput, delay (latency), delay variation (jitter), packet-loss, and overall ‘uptime’.


AC PSU DC PSUNT1003 80-70-947T 80-71-947T

NT1005 80-70-948T 80-71-948T

NT1005 Dual AC 80-74-948T

NT10G05 80-70-952T 80-71-952T

NT10G05 Dual AC 80-74-952T

COMPREHENSIVE NETWORK TESTING AND MONITORING

LAN & WAN

• Complete transparency to regular traffic when embedded within the active data-path• Copper and fibre physical connection & traffic monitoring, up to 1Gbps throughput• SFP DDM statistics and option for integrated & automated ‘OTDR’ fibre fault location reporting

On-demand Testing

• Embedded test traffic generation, loop-back & analysis, accurate to micro-second resolution• RFC2544, ITU-T Y.1564 and ‘custom’ test profiles, for both Layer-2 (Ethernet MAC) and Layer-3 (IP) traffic• SNMP data-retrieval support for monitoring/charting of key data over extended time-periods at NOC platform

‘Always On’ SLA Monitoring

• Delay (latency) and delay-variation (jitter) monitoring via ITU- T.1731 and TWAMP-lite• Alarming in the event of pre-defined ‘Service Level Agreement’ (SLA) breach such as, for example, latency growing above a speci fied threshold• Overall network visibility, configuration/management access and alarming via Management Platform

Management & Alarms

• Management via local terminal or remotely via Telnet/secure SSH or Web Browser application• TACACS+ for management user authentication• Comprehensive alarming with support for SNMP ‘TRAP’ alerts to NOC platform(s).

5


6

MORE INFORMATIONFIBRE & COPPER TRANSCEIVERSUnder the MetroWAVE brand, Metrodata offers interchangeable ‘plug-in’ Transceivers for Data Communications platforms including Switches, Routers and Servers from all major manufacturers. Metrodata supplies a wide variety of Transceivers in the most popular industry-standard formats. Accurate ‘vendor coding’ ensures compatibility with the major equipment vendors’ expensive ‘own-brand’ products.

The Metrodata team are specialists in Interface Matching for Networking and Communications products, and have experience in protocols including Ethernet, PDH/SDH, Serial, ATM and, most importantly, all aspects of Fibre Communications, including Wavelength Division Multiplexing (CWDM and DWDM).

Networking equipment has evolved to use pluggable transceivers rather than the historic fixed-format interfaces, typically soldered onto a circuit board. There are various different MSA (Multi-Source Agreement) standards for pluggable transceivers, although some of the most common varieties are shown below. Our prices are amongst the best in the industry, so please contact us for any of your transceiver requirements.

SFP FIBRE TRANSCEIVERSmall Form Factor Pluggable (SFP) is a compact, hot pluggable transceiver used in both Telecommunications and Data Communications applications. Standard fibre SFP transceivers have dual ‘LC’ connectors, whilst single-fibre ‘BiDi’, SFP transceivers present a single ‘LC’ or ‘SC’ connector. Operating speeds vary from 100Mbps to 4Gbps, supporting fibre links of up to 200km.

SFP+ OPTICAL TRANSCEIVEREnhanced Small Form Factor Pluggable (SFP+) transceivers use the same physical case format as SFP, but support operating speeds of 8Gbps and 10Gbps.SFP and SFP+ transceivers are readily available for both multi-mode and single-mode fibre applications and also for copper cable via both RJ45 and, albeit rarely, miniature dual co-axial connectors.

XFP TRANSCEIVERSlightly larger than SFP+ devices, XFP transceivers support 10Gbps Ethernet, 10Gbps Fibre Channel, SDH (STM-48) and Sonet (OC-192) applications.

QSFP+ TRANSCEIVEROffering 40Gbps connections via a number of multiplexed wavelengths, QSFP+ transceivers are slightly larger again than the XFP format.

For more details regarding our Transceiver offering:

Download our Range Guide(metrodata.co.uk/sfpguide)

Learn more online (metrodata.co.uk/sfp)

Contact Us(metrodata.co.uk/contact)


7


CodeMetroWAVE-8A 80-32-021

MetroWAVE-9S 80-32-012

MetroWAVE-D8-25 80-33-012

MetroWAVE-D8-51 80-33-014

MetroWAVE-D16 80-33-022

MetroWAVE-D40P 80-33-032

MetroWAVE-EDFA Call Sales

MetroWAVE-DCM20 80-33-041





MetroWAVE-CWDMmeter 80-32-031

MetroWAVE-DWDMmeter 80-32-032

MetroWAVE-rack 80-32-051

PASSIVE WDM MULTIPLEXERSAlso under the MetroWave brand are our range of passive CWDM and DWDM optical multiplexers allowing independent services to be converged over a singlemode fibre pair. Each service is assigned a different wavelength, all of which are combined for transmission over a single Fibre Transmit/Receive pair. Many different applications, including Ethernet, Serial, TDM, and Fibre-Channel (SAN) can be supported.

These small cost-effective multiplexers are optically passive, offering excellent reliability.

METROWAVE-9S:9-CHANNEL PASSIVE (1471nm - 1611nm CWDM + 1300nm WIDEBAND) CWDM MULTIPLEXER WITH MONITOR PORT

METROWAVE-8A:8-CHANNEL PASSIVE (1271nm - 1411nm) CWDM MULTIPLEXER, CAN BE USED AS AN EXPANSION UNIT TO THE METROWAVE-9S

METROWAVE-CWDMMETER:MONITORS ALL 18 CWDM CHANNELS SIMULTANEOUSLY PLUGS INTO THE METROWAVE MONITOR PORT FOR EASY BUT SOPHISTICATED SYSTEM LEVEL DEBUG

Full range of vendor compatible fibre transceivers are available for either Metrodata or third party equipment including: SFP, SFP+, XFP, X2 and XENPAK, operating at a range of speeds up to 10Gbps, over 80km with CWDM or DWDM specifications.

METROWAVE-D8:8 CHANNEL PASSIVE DWDM 100GHz, C-BAND CH25 - CH32, UPLINK 1550NM (D8-25)CH51 - CH58, UPLINK 1530NM (D8-51)

METROWAVE-D16:16 CHANNEL PASSIVE DWDM 100GHz, C-BANDCH25 - CH40, UPLINK 1550NM

METROWAVE-DWDMMETER:MONITORS ALL 48 DWDM CHANNELS SIMULTANEOUSLY PLUGS INTO THE METROWAVE MONITOR PORT FOR EASY BUT SOPHISTICATED MONITORING

METROWAVE-D40P:40 CHANNEL PASSIVE DWDM, 100GHz C-BANDCH21 - CH60 ITU GRIDCONTROLLED TEMPERATURE (FOR SERVICE STABIITY), MAINTAINED BY DUAL HOT-SWAP POWER SUPPLY

METROWAVE-EDFA:ERBIUM DOPED FIBRE AMPLIFIER FOR LONG-DISTANCE SERVICE EXTENSIONTHREE OPTICAL C-BAND APPLICATIONS: BOOSTER / IN-LINE / PRE-AMPLIFIEROUTPUT POWER LEVELS FROM 13 ~ 22dDm SUPPORTEDGAIN OF 8 ~ 33dBm SUPPORTED

METROWAVE-DCM:DWDM DISPERSION COMPENSATION DEVICEG.652 FIBRE C-BAND 100% SLOPE COMPENSATIONTELCORDIA GR-2854-CORE AND GR1221-CORE STANDARD CERTIFICATION


FIBRE MODEMS & TAPSMetrodata have an extensive product range providing different Fibre Optic Solutions:- Fibre Optic Modems (FOM) for E1, E3, DS-3 extension over fibre- Fibre Optic Modems (FOM) for RS232, Serial extension over fibre, e.g. X.21, V.35, EIA530, RS449, V.36- High-density Fibre TAPs

E1/ISDN-30 OVER FIBRE


AC PSU DC PSUFC1000/MM 80-05-910 80-21-910

FC1100/SMSH 80-05-918 80-21-918

FC1200/SMLH 80-05-919 80-21-919

FC3000/MM 80-05-920 80-21-920

FC3100/SMSH 80-05-921 80-21-921

FC3200/SMLH 80-05-922 80-21-922

FIMO-232/MM 80-05-924 80-21-924

FIMO-232/SMSH 80-05-925 80-21-925

FIMO-232/SMLH 80-05-926 80-21-926

FIMO-2100 80-05-940 80-21-940

FIMO-2100 155MBPS SFPS

MULTIMODE 2KM 1300NM 80-30-021

SINGLEMODE 10KM 1300NM 80-30-031



FIBRE TAPsMULTIMODE 850NM 50/125UM 80-32-110MULTIMODE 850NM 62.5/125UM 80-32-111MULTIMODE 1300NM 50/125UM 80-32-120MULTIMODE 1300NM 62.5/125UM 80-32-121SINGLEMODE 1260NM-1620NM 80-32-110

FC1000:BNC/ RJ45 E1 TO MULTMODE FIBRE

FC1100:BNC/ RJ45 E1 TO SINGLEMODE SHORT HAUL

FC1200:BNC/RJ45 E1 TO SINGLEMODE LONG HAUL

FIMO-232:ASYNCHRONOUS RS-232STANDARD 9 WAY D-TYPEDTE OR DCE INTERFACEDATE RATE AGILEEXTEND UP TO 70KM

E3/DS-3 OVER FIBRE

SERIAL OVER FIBRE

FC3000:BNC E3/DS-3 TO MULTMODE

FC3100:BNC E3/DS-3 TO SINGLEMODE SHORT HAUL

FC3200:BNC E3/DS-3 TO SINGLEMODE LONG HAUL

8

FIMO-2100:RESILIENT FIBRE UPLINKMULTI-STANDARD SERIAL INTERFACE UP TO 8.192MBPSRS-232, EIA530, X.21 AND V.35DTE OR DCE INTERFACECONFIGURABLE IN 64KBPS STEPSEXTEND UP TO 70KM

MetroWAVE-TAP:SUPPORTS UP TO 24 DUPLEX TAPPED NETWORK CONNECTIONS IN 1U RACK SPACESUPPORTS 10MB, 100MB, 1GB AND 10GB DATA TRAFFICMONITOR PORTS AVAILABLE FOR NON-EVASIVE SYSTEM DEBUGSINGLE MODE AND MULTIMODE OPTIONS AVAILABLEUNPOWERED PASSIVE DEVICE FOR HIGHEST POSSIBLE RELIABILITY

MetroWAVE FIBRE TAP

ALL PRODUCTS PAYLOAD AND PROTOCOL TRANSPARENT - SUITABLE FOR A WIDE RANGE OF APPLICATIONS INCLUDING ISDN-30 FOR PBX ‘VOICE TRUNKS’

ALL PRODUCTS PAYLOAD AND PROTOCOL TRANSPARENT


9

MEDIA CONVERTERSMetrodata have a wide range of products for transporting various technologies over fibre including Ethernet, STM-1/OC-3 and STM-4/OC-12.


AC PSU DC PSUFC5000 (No SFP) 80-05-933 80-21-933

FC5000 SX 80-05-934 80-21-934

FC5000 LX 80-05-935 80-21-935

FC7000/MM 80-05-937 80-21-937

FC7100/SMSH 80-05-938 80-21-938

FC7200/SMLH 80-05-939 80-21-939

FCM5000 (No SFP) 80-70-937 80-71-937

FC4000/MM 80-05-915 80-21-915

FC4100/SMSH 80-05-916 80-21-916

FC4200/SMLH 80-05-917 80-21-917

FC-GIGE 80-05-923 80-21-923

FC2000 80-05-911 80-21-911

FC2500 80-05-912 80-21-912

FC-GigE:MEDIA CONVERSION BETWEEN 1000BASE-SX & 1000BASE-LX850NM TO 1300NM WAVELENGTH CONVERSION1000BASE-LX = 10K OVER SINGLEMODEZERO TOUCH, PLUG AND PLAY INTERFACE

FC5000:CONVERSION FROM 10/100/1000BASE-T TO 100/1000BASE-XSFP MODULE FOR 1000BASE-SX OR 1000BASE-LX1000BASE-SX = 550M OVER MULTIMODE 1000BASE-LX = 10KM OVER SINGLEMODELINK STATE FORWARDINGZERO TOUCH, PLUG AND PLAY INTERFACE

ETHERNET COPPER TO FIBRE

STM-1 ELECTRICAL TO FIBRE

MULTIMODE TO SINGLEMODE FIBRE

FC4000:STM-1/OC-3 BNCELECTRICAL TO MULTIMODEPLUG AND PLAY INTERFACE

FC4100:STM-1/OC-3 BNCELECTRICAL TO SINGLEMODE SHORT HAULPLUG AND PLAY INTERFACE

FC4200:STM-1/OC-3 BNCELECTRICAL TO SINGLEMODE LONG HAULPLUG AND PLAY INTERFACE

FC2000 / FC2500:STM-1/OC-3 MULTIMODE TO SINGLEMODE SHORT/LONG HAUL100BASEFX MULTIMODE TO SINGLEMODE SHORT/LONG HAULPLUG AND PLAY INTERFACE

FC7X00:CONVERSION FROM 10/100BASE-T TO 100BASE-XETHERNET OVER SINGLEMODE / MULTIMODE LINK STATE FORWARDINGZERO TOUCH, PLUG AND PLAY INTERFACE

FCM5000:CONVERSION FROM 10/100/1000BASE-T TO FIBREFLEXIBLE FIBRE OR COPPER SFP PORTLINK STATE FORWARDINGMANAGEDVLAN CAPABLE


DATA INTERFACE CONVERTERSMetrodata support a wide range of standard telco, router, satcom and encryptor data interface converters. Typically used for converting Nx64Kbps and E1, E2, E3 and DS-3 leased lines to serial data interfaces.

E1 / E3 PRODUCTS


AC PSU DC PSUDC1000 80-05-210 80-21-210

DC1200 80-05-212 80-21-212

DC3000 80-05-230 80-21-230

DC3200 80-05-232 80-21-232

DC3445 80-05-234 80-21-234

FM4000BNC TO X.21

80-05-005 80-21-005

FM4000BNC TO V.35

80-05-006 80-21-006

FM4000RJ45 TO X.21

80-05-007 80-21-007

FM4000RJ45 TO V.35

80-05-008 80-21-008

BC1000 80-05-556 80-21-556

BC1100 80-05-557 80-21-557

DC1000:E1 G.703 TO X.21E1 BNC OR RJ45CLEAR CHANNEL

DC1200:E1 G.703 TO V.35E1 BNC OR RJ45CLEAR CHANNEL

DC3000:E1 G.703 TO X.21E1 BNC OR RJ45G.704 Nx64Kbps

DC3200:E1 G.703 TO V.35E1 BNC OR RJ45G.704 Nx64Kbps

FM4000:E1 CSU/DSUBNC TO X.21 BNC TO V.35RJ45 TO X.21 RJ45 TO V.35REMOTE MANAGEMENT OPTION

DC3445:E3 OR DS-3 TO HSSI CONVERTERDIP SWITCH SELECTABLE

10

BC1X00:THE BC1X00 BASEBAND CONVERTER ALLOWS THE LATEST GENERATION OF SERIAL LINK AND BULK ENCRYPTION DEVICES WITH LVDS/EIA-644 INTERFACES TO BE CONNECTED TO SATCOMS EQUIPMENT, ROUTERS AND RADIO SYSTEMS. ENCRYPTOR RESYNC IS SUPPORTED

LVDS TO HSSI CONVERTERS


MULTIPLEXERSMetrodata offer a wide range of multiplexers, converging multiple Nx64Kbps services over E1, or multiple E1, T1, E3, DS-3 and Ethernet services over STM-1 or OC-3.

E1 SUB-RATE MULTIPLEXERS


AC PSU DC PSUFM4500

BNC TO X.21 80-05-009 80-21-009

BNC TO V.35 80-05-010 80-21-010

RJ45 TO X.21 80-05-011 80-21-011

RJ45 TO V.35 80-05-012 80-21-012

MetroLAN1000SM SH 80-12-301 80-24-301

SM LH 80-12-302 80-24-302

MM 80-12-300 80-24-300

MetroLAN2000SM SH 80-12-311 80-24-311

SM LH 80-12-312 80-24-312

MM 80-12-310 80-24-310

Emux ChassisEmux-4 80-12-400 80-24-400

Emux-8 80-12-401 80-24-401

Emux-16 80-12-402 80-24-402

E1 - FIBRE MUX

FM4500:E1 DROP/INSERT MULTIPLEXER1 X E1 LINE PORT1 X E1 DROP PORT, 4 X SERIAL PORTREMOTE MANAGEMENT OPTION

SDH/FIBRE MUX

EMUX:COST EFFECTIVE 4, 8 OR 16 PORT E1 FANOUT OVER FIBRERESILIENT 1+1 FIBRE INTERFACE OFFERS AUTOMATIC SWITCH OVERREMOTE CONFIGURATION AND TESTING OF UNITS ACROSS THE NETWORKCOMPREHENSIVE MANAGEMENT & PERFORMANCE MONITORING OF BOTH DEVICE AND LINE SFP FIBRE MODULES ENABLE MANY TYPES OF FIBRE: MULTIMODE, SINGLEMODE, CWDM AND DWDM

METROLAN 1000:8 X ETHERNET PLUS 8 X E1 / T1 OVER SDH STM-1 / SONET OC-3

METROLAN 2000:8 X ETHERNET PLUS 8 X E1 / T1 PLUS 3 X E3/DS-3OVER SDH STM-1 / SONET OC-3

MAXIMUM FIBRE DISTANCESMM SMSH SMLH

5KM 30KM 70KM

11

NOTE: BOTH METROLAN UNITS ARE ABLE TO BE USED AS ‘BACK TO BACK’ FIBRE MUXS

Metrodata LtdLaxton House, Crabtree Office VillageEversley Way, Egham, Surrey TW20 8RYU.K. Tel: +44 (0)1784 744700Fax: +44 (0)1784 744701E-mail: [email protected]: www.metrodata.co.uk

product catalogue - metrodata limited · fc3100/sm sh 80-16-921 fc3200/sm lh 80-16-922 fc4000/mm...

Documents