product catalogue - perry · pdf file stair treads length 50~100 100 100 nosing (other types...

Industrial floor grating and handrail stanchions. The complete package of manufacture, galvanizing and delivery.
For quotations or general enquiries, contact Perry Grating:
Email [email protected]
www.perrygrating.co.nzwww.perrygrating.co.nz
GRATING
grating
Product Catalogue
Refer to our terms and conditions of trade.
Freephone 0800 425 848

www.perrymetalprotection.co.nz2 www.perrymetalprotection.co.nz
A Unique Product
Pitch of Bearing BarA centre distance between the two bearing bars adjacent to each other is called pitch of load bar. Standard pitch is 30mm (Series 1),40mm (Series 2).
Product range designed for the Australasian marketOur manufacturing factory boasts an extensive product range with a simplified key range of options packaged specifically for the New Zealand and Australian market.
Perry Grating product groups: Loadbarcentres:30mm
load bar centres for high foot traffic. 40mm load bar centres for low foot traffic.
Important please note: we can supply 60mm centres but this size does not meet AS/NZ standards for elevated platforms.
Long-termcostsavingsMulti-purposeanddiversityare some of the best attributes a product can offer, and the Perry Grating products certainly offer these. Grating has many uses not only in industry as walkway flooring but also as screens, drain covers and stairways.
Better still, Perry Grating is unique! Similar to a steel I Beam where the strength is in the flanges, the bar profile gives a 25% weight reduction while retaining strength.
This design saves not only weight, but also material cost and galvanizing cost. Savings are also made in the design of the supporting structure for the grate, as the product is so much lighter and stress is reduced.
Pitch of Cross BarA centre distance between the two cross bars adjacent to each other is called pitch of cross bar, and its standard is 100mm.
Construction of Perry Grating
Width of Grating (W)
LengthofGrating(L)Height ofEnd Plate (h)
End plate
Pitch of Cross Bar (CP)
Cross Bar (SQ. twisted)
Thickness of Web (t)
Thickness of Flange (T)
Height of Bearing Bar (H)
6
Cross Bar (SQ. twisted)

www.perrymetalprotection.co.nzwww.perrymetalprotection.co.nz
How to order Perry Grating
Stock panels ready to use off the shelfWe carry a full range of off the shelf stock panel sizes. All panels are Series One 995 x 5800mm and Series Two 1005 x 5800mm, and sizes range from 20mm load bar to 75mm load bar. Please contact us for sizes and availability of the quantity you require. Phone 0800 425 848
Panels are fabricated normally to the nearest load bar spacing e.g 600mm-605mm.
We recommend 4 fixing clips per square metre.
Made to orderWhat we require from the client:
Typeofloadbarrequired
Loadbarcentres(ie.30mm,40mm)
Loadbardirections
Cutoutsfullydimensioned
Kickplatedetailifany
Auckland Container Port
As drawn
As detailed
International Standards GuaranteedWhen quality is the cornerstone of all operations, standards must follow international benchmarks.
Supplied throughout Australasia PERRY GRATING is made to international standards and the factory is accredited to ISO 9001:2000.
The ISO 9001:2000 is an international quality management system involving external audits and stringent quality management criteria.
Incorporating fourteen grate forging machines, the factory has high manufacturing tolerances. This is shown in the unique vertical alignment of the load bars resulting in a stronger,better-lookingproductforourcustomers.
The standard applicable for galvanizing is AS/NZS 4680 Hot Dip Galvanized (zinc) coatings on fabricated ferrous articles.
www.perrygrating.co.nz

PPlatform
457
560 636
600
75
152
CCored
WWelded
S Side
S Side
IGIn Ground
STANDARD BASEPLATE
TOPOFSTEEL(BEFORE GRID)
Standard Stanchions
* BEFORE ORDERING: Check suitability of this dimension to match adjoining horizontal rail and adjust if necessary.
Please note: ALLDIMENSIONSAROUNDCENTRELINES
ALLDIMENSIONSINmm
ALLDIMENSIONSShOwNCANBEALTEREDTOSUITANyREqUIREMENTS
ALLSTANChIONSAVAILABLEDRILLEDONESIDEONLy(D.O.S.O.)
1017
560
457
AM SCSide Conveyor
SCSide Conveyor
SOSide Offset
P UNICorner Post
55 55
457
560505
1017
75
^ 110,115,135,145mm optionsMANUFACTUREDTOAS1657-1992
Sydney Tower

A Walkway System
TYPE AM
TYPE WHANDRAIL BENDS
90 BENDS
TYPE S
TYPE SAR
TYPE P D.O.S.O
TYPE SO
FLANGES
ANGLE CLOSURE BEND
Pohokura Oil Project

Hand Rail and Grating Accessories
Field Welding
1. Field weldingRecommended for all permanently installed gratings, and for gratings that are to be removed only at infrequent intervals.
This can be secured quickly and safely by one person, working from the floor surface.
Important note: A minimum of four clips per panel must be used to restrain floor panels. Where larger panels are to be fixed, it is advisable to use extra clips on any available intermediate supports.
Closure and Rail Bends
End Closure Bends
Kickplate Bracket
Corner Base Plates
AM Base Plates
Standard Base Plates
Top Rail Bends
Knee Rail Bends
Angle Closure Bends to suit AM Stanchions

Stair Treads
Length
50~100 100 100
Nosing (other types of nosing available on request)
+ 0 3
Made to order
Made to orderWe can supply any size/configuration of stair tread at competitive rates and delivery times.
PT1Welded
Banded only
PT2Bolted
end plates
PT3Welded
Banded only with strip
nosing
PT4Bolted
plates with with strip
nosing
PT5Welded
Banded onlyabrasivenosing
PT6Bolted
end platesabrasivenosing
End Plate
50
25 Pitch (A)
14
Bearing Bar Cross Bar
30 P
itch
Recommended Tread Width
Loadbearingbarsat30mmor40mmpitch
Width (mm) 215 245 275 305
Bolt pitch (A) 125 125 125 125
Length(mm) asrequested
Size of bearing
bars (H)
* Stair Treads also available in FRP.

Mes
h Si
zeLo
ad B
ar
Size
(mm
)
Serr
ated
Bar
Fac
tors
Wei
ght p
er
sq/m
(kg)
Span
(mm
)
SD
600
750
900
1050
1200
1350
1500
1650
1800
1950
2100
2250
2400
2550
2700
2850
3000
PG20
3/FB
19x3
19S
3.73
4.66
5.59
6.85
8.95
D0.
71.
382.
383.
976.
77
PG25
3/FB
25x3
0.88
1.21
24S
2.16
2.70
3.23
3.96
5.18
6.55
8.09
D0.
310.
601.
041.
732.
964.
747.
23
PG25
5/IB
25x3
0.82
1.30
32S
1.39
1.74
2.09
2.56
3.35
4.24
4.71
6.33
D0.
120.
290.
611.
121.
913.
064.
676.
84
PG30
3/FB
32x3
0.91
1.16
30S
1.32
1.65
1.98
2.42
3.16
4.00
4.94
5.98
7.12
D0.
150.
290.
500.
831.
412.
263.
455.
057.
15
PG30
5/IB
32x5
0.84
1.25
38S
0.86
1.08
1.29
1.59
2.07
2.62
3.24
3.92
4.66
5.47
6.34
D0.
100.
190.
330.
540.
931.
482.
263.
314.
686.
458.
68
PG40
5/IB
44x5
0.89
1.16
50S
0.46
0.58
0.69
0.85
1.11
1.40
1.73
2.09
2.49
2.92
3.39
3.89
4.43
5.00
5.60
6.24
D0.
040.
070.
130.
210.
360.
580.
881.
281.
822.
513.
374.
445.
757.
329.
2011
.43
PG50
5/IB
50x5
0.92
1.12
55S
0.37
0.46
0.55
0.67
0.88
1.11
1.37
1.66
1.98
2.32
2.69
3.09
3.51
3.97
4.45
4.96
5.49
D0.
030.
050.
090.
150.
250.
400.
610.
901.
271.
752.
003.
104.
025.
126.
437.
999.
81
PG65
7/IB
65x7
85S
0.18
0.23
0.28
0.34
0.44
0.56
0.69
0.84
1.00
1.17
1.36
1.56
1.78
2.00
2.25
2.50
2.77
35.5
Pitc
hD
0.01
0.02
0.03
40.
057
0.09
80.
156
0.24
0.35
0.49
0.68
0.91
1.21
1.56
1.99
2.50

product catalogue - perry · pdf file stair treads length 50~100 100 100 nosing (other types...

Documents