Subsea

Ver. Status Issue date Made by Checked by Approved by

00 IFC 2013.04.30 KNUDTZEN, FRITHJOF

ROBERTS, DEREK L INNES, ANDREW

Originator: KNUDTZEN, FRITHJOF

This document contains Aker Subsea legal entity proprietary and confidential information that is legally privileged and is intended only for the person or entity to which it is addressed and any unauthorised use is strictly prohibited. It is provided for limited purpose and shall not be reproduced, stored electronically, transferred to other documents, disseminated or disclosed to any third parties without the prior written consent of the relevant Aker Subsea legal entity. Any attachments are subject to the specific restrictions and confidentiality regulations stated therein and shall be treated accordingly. The document is to be returned upon request and in all events upon completion of use for which it was provided.

Product Data Sheet, WI XMT

Brynhild SPS

10001727952-PDC-000

Generic document No.:

Client Document Number Client Document Version

Project code

Originator Discipline Doc.Type Sequential

number 01

21480-AKSSU-R-DS-0018

Reason for Issue Revision Rev. Date Prep. By Checked Approved

Issued for IFC 01 30.04.2013 Knudtzen, Frithjof Roberts, Derek L. Innes, Andrew

www.akersolutions.com/subsea

Water Injection XMT

The Water Injection XMT lands out in the wellbay on the4 slot manifold template. Here it connects onto the18-3/4" wellhead and to the manifold using a 12"Horizontal Connection Module (HCM). The hydrauliccontrol pressure is supplied through the 12" HCM andthe electrical supply through 2 off electrical flying leadswhich connects on to the Subsea Control Module (SCM)directly.

The Water Injection XMT provides the necessary barriersneeded to inject water into the well in order to keepproduction going through out the lifetime of the well. TheWater Injection XMT is designed so that it can be convertedinto a Production XMT by replacing the choke insert and theChemical Injection Throttle Valves (CITVs). The SCM provideshydraulic control and monitoring abilities for pressure andtemperature in the XMT and in the well.

© Copyright 2012 Aker Solutions. All rights reserved.

Main ROV Panel

Downhole Interface Unit

18-3/4” H4 Re-entry hub

Mechanical Override Rods

Overall dimensions, H / W / D: 3698mm / 4000mm / 5343,5mm

Weight: ~42 tons

Nominal injection bore: 5-1/8"

Nominal annulus bore: 2-1/16"

Design pressure: 690 bar at 345 bar hydraulic supply552 bar at 207 bar hydraulic supply

External interfaces: 12" HCM18-3/4" H4 connector18-3/4" Re-entry hub

Design depth: 82m

Design life: 15 years

Design temperature: 4 - 135°C

API product specification level: PSL 3G

SAP material number: 10156492

Work Package XMT

For further information please contact:

www.akersolutions.com/subsea

Field proven design

This Water Injection XMT has been based on theoriginal High-Pressure/High-Temperature (HPHT) XMTwhich was first designed for use on the Statoil Kristinfield. This has later been used on the Statoil Morvinand Total Hild fields.

This XMT will be installed on the Lundin Brynhild field.

Aker Solutions ASSnarøyveien 36, NO-1364 FornebuPO Box 94, NO-1325 Lysaker

Production Wing Valve

Production Master Valve

Production Wing Block

Tubing Hanger Orientation Helix

18-3/4” H4 Connector

Annulus Circulation Valve

Annulus Master Valve

Annulus Wing Block

Spool