2-piece

Experience & InnovationNaturally white dental implants made of Zirkolith®

✔ EC-Certificate

www.zsystems.com

Product flyerAll solutions, naturally metal-free

Prod

uct fl

yer

| 0

4/14

Metal-free, highly biocompatible Zirconia implant Perfect esthetics, white. No visible grey rings or

shadows, even in case of thin or receding gingiva. Hypoallergenic, immunologically neutral. Less biofilm deposits on ZrO2 implants than on

titanium implants, resulting in a reduced risk of associated diseases such as peri-implantitis, cardio-vascular diseases and stroke.

Excellent osseointegration due to unique laser-modified surface (SLM®).

Prosthetics close to natural teeth The single-piece implant does not require a separate

abutment – all-in-one and without micro gap. Immediately after insertion, the implant can be

ground and prepared like a natural tooth. After cementing, also the 2-piece abutment be ground

and processed like a natural tooth.

www.zsystems.com

Why zsystems?zsystems is the world’s leading supplier of ceramic implants.

Our implants are manufactured employing the unique “Zirkolith®” process – it embraces our experience in the field of development, material treatment, quality assurance and finishing of zirconium oxide.

All products are FDA, CE, ISO 9001, ISO 13485 certified and manufactured in accordance with the “Medical Device Directive” MDD 93/42/EEC. We are the only manufacturer of zirconium oxide implants with annual CE inspection, FDA registration and successful FDA inspection.

| Page 2

Z5c-40-10

Mag

nific

atio

n

> Implant 4 mm * 10 mm

High strength connection: breaking strength depending on abutment/implant diameter 300 to 650 N (dynamic fatigue in saline solution according to ISO 14801).

Same outer contour andsurface as our single piecezsystems implants ensurestransferable results: same drill set excellent osseointegration

with laser surface SLM® very good long-term results

> 98% CSR** Tapering thread with widened

core diameter in the upper part of the thread ensures optimum mechanical strength and primary stability.

Abutment* can be ground directly in situ – due to Zirkolith® individual esthetics Fast and cost-efficient

restoration – like a natural tooth

Revolutionary surface technology by laser- structured surface. Increased surface roughness and improved implant-bone contact provides excellent osseointegration and a maximum of safety.

Improved self-cutting thread Newly designed bone chip

reservoir

* zsystems has had the manual grindability investigated by the renowned Fraunhofer Institute for Material Mechanics. The results are clear: No application-relevant impairment of the ground Z5 implants was observed, ground implants did not reveal an increased risk of breaking. zsystems grinding procedure: exclusive use of red ring diamond (47 μ), maximum water cooling, working without pressure. zsystems will be pleased to provide you with the results on request.

** Compound survival rate. Data on file.

Highlights of the Z5c Zirkolith® implant

| Page 3

3.6 mm implant

> Core drilling 2.85 mm with TD285

4 mm implant

> Core drilling 3.25 mm with TD325 after TD285

5 mm implant

> Core drilling 3.75 mm with TD375 after TD325 and TD285

Flap design

> Crestal incision, punching if required

> Mucoperiosteal flap

Implant bed

> Smooth bone crestally

> Center-punch implant position

Pilot drilling

> Depth drilling with TD230 (2.3 mm)

> Thread cutting with T360, only in the region of compact bone or bone class D1/D2

> Thread cutting with T400, only in the region of compact bone or bone class D1/D2

> Thread cutting with T500, only in the region of compact bone or bone class D1/D2

> Core drilling 4.25 mm with TD425 after TD375, only in the region of compact bone or bone class D1/D2

Instructions for use Z5 implants/Z-tools5

mm

impl

ant

4 m

m im

plan

t3.

6 m

m im

plan

t

max.1.3 mm

10 mm

15 mm

8 mm

6 mm

11.5 mm

13 mm

Bone

leve

l

> Correct vertical position (Z5c-40-10 and Z5m-40-10)

| Page 4

ESEM* image of thread shank.The surface is sandblasted.

Following SLM® (surface laser modified) the zsystems Zirkolith® implants achieve the optimal degree of micro-/macro-roughness (2 – 3 µ)

ESEM* image of thread shank.The surface is sandblastedand laser-modified with SLM®.

Surface Z-Look3 and Z-Look3 Evo implants (x 500)

New surface of the Z5m/Z5c implants (x500)

Roughness profile Z-Look3 Evo – ZrO2 sandblasted

Prof

ile h

eigh

t [µm

]

8

6

4

2

0

-2

-4

-6

-8100 200 300 400 500 600 700 800

Profile length [µm]

Mesurements: Alicona Infinte Focus IFMRa = 0,670 µm

Roughness profile Z5m/Z5c – ZrO2 sandblasted and laser-modified

Mesurements: Alicona Infinte Focus IFMRa = 3,10 µm

8

6

4

2

0

-2

-4

-6

-8100 200 300 400 500 600 700 800

Prof

ile h

eigh

t [µm

]

Profile length [µm]

* ESEM: Environmental Scanning Electron Microscope

Protection principle

> load-free healing> 1.5 mm distance to

the implant> observe TIB

for immediate restoration

Uncovery

> excess soft tissue is removed with the electric surgical device or the excision wedge

Impression taking

> Standard impression with closed tray for ground abutment

Cementing of final prosthesis

> Glass ionomer cement, i.e. Ketac®

Insertion Suture closure

> close flap over step with button sutures

> “Non-Touch-Insertion” with the angle piece adapter HA12 (max. 55 Ncm) or ratchet adapter RA16 / RA24 (max. 70 Ncm)

> Biological width: distance crown margin to bone 2 mm

Grinding of abutment

> redring diamond, i.e. egg-shape, without pressure, maximum revolutions, water cooling

1-pi

ece

| Page 5

2 Remove healing cap.

5 zsystems recommends Panavia™ SA Cement Automix.

3 Clean inner geometry with alcohol. Important: the adhesive joint must be free of grease and dust.

6 Grip abutment with ratchet adapter RA16/RA24.

1 Secure the healing cap with dental floss and loosen carefully with raspatory/tweezers.

4 Blow out inner geometry to remove remaining liquid.

9 Insert abutment in implant and activate taper connection by pressing in hard.

10 Light-curing.1 1 Remove excess cement

after curing.

Z5c: Instructions for cementing the abutment

7 Clean abutment pin with alcohol/dry with compressed air. Important: the adhesive joint must be free of grease and dust.

8 The areas of the abutment pin to be cemented are marked in red. Attention: avoid forma-tion of bubbles during cementing.

Adapter

> “Non-Touch- Inser tion” with the angle piece adapter Z5c-HA12 (max. 25 Ncm)

Adapter

> “Non-Touch- Inser tion” with the ratchet adapters Z5c-RA16 and Z5c-RA24

Healing Cap

> Place and snap-in Z5c-HC40 / Z5c-HC50, then close with suture

Impression

> Standard impression of the cemented abutment with closed tray

Cementing of final prosthesis

> Glass ionomer cement, i.e. Ketac®

Grinding of the abutment

> Area released for grinding is marked in green

2-pi

ece Cementing of the abutment

> The areas of the abutment pin to be cemented are marked in red

| Page 6

Z5m-40-08Ø 4 mm, Ø shoulder 4.8 mm, insertion depth 8 mmSuitable for most indications with reduced vertical bone availability.

Z5m-40-11Ø 4 mm, Ø shoulder 4.8 mm, insertion depth 11.5 mmWith standard- thread diameter for universal use in the maxilla and mandible.

Z5m-40-10Ø 4 mm, Ø shoulder 4.8 mm, insertion depth 10 mmWith standard- thread diameter for universal use in the maxilla and mandible.

Z5m-40-13Ø 4 mm, Ø shoulder 4.8 mm, insertion depth 13 mmWith standard thread diameter for universal use in the maxilla and mandible with good vertical bone availability.

Z5m-50-08Ø 5 mm, Ø shoulder 6 mm, insertion depth 8 mmWith enlarged thread diameter, especially suitable for wide alveolar ridges with a reduced amount of available vertical bone.

Z5m-50-10R Ø 5 mm, Ø shoulder 5.4 mm, insertion depth 10 mmWith reduced shoulder diameter for use with good bone availability and reduced interdental space, especially in the premolar/anterior region.

HA12Angle piece adapterStainless steel, for screwing in Z5m implants with the angle piece.

RA16Ratchet adapter 16 mmStainless steel, for screwing in Z5m implants with the torque ratchet.

Z5m-50-11R Ø 5 mm, Ø shoulder 5.4 mm, insertion depth 11.5 mmWith reduced shoulder diameter for use with especially good vertical bone availability and reduced interdental space, particularly in the premolar/anterior region.

RA24Ratchet adapter 24 mmStainless steel, for screwing in Z5m implants with the torque ratchet.

Z5m-50-10Ø 5 mm, Ø shoulder 6 mm, insertion depth 10 mmWith enlarged thread diameter, especially for wide jaws.

Z5m-50-11Ø 5 mm, Ø shoulder 6 mm, insertion depth 11.5 mmWith enlarged thread diameter, especially for wide jaws with especially good vertical bone availability.

Z5m-50-13 Ø 5 mm, Ø shoulder 6 mm, insertion depth 13 mmDue to its length and diameter especially suited for use in immediate implantations* in the anterior maxilla and canine region.

Single-piece Z5m implants are presently available in the following dimensions:

Tools an accessories for one- and two-piece Z5 implants

Z5m-36-10 Ø 3.6 mm, Ø shoulder 4.6 mm, insertion depth 10 mmFor narrow alveolar ridges with reduced vertical bone availability.Maxilla: 12, 22. Mandible: 31, 32, 41, 42.Not suitable for Maxilla: 11, 21. Maxilla/mandible: canines, premolars and molars as well as bridge restorations.

Z5m-36-11 Ø 3.6 mm, Ø shoulder 4.6 mm, insertion depth 11.5 mmFor narrow alveolar ridges with sufficient vertical bone availability.Maxilla: 12, 22. Mandible: 31, 32, 41, 42.Not suitable forMaxilla: 11, 21. Maxilla/mandible: canines, premolars and molars as well as bridge restorations.

| Page 8

Z5c-40-08Ø 4 mm, Ø shoulder 4.8 mm, insertion depth 8 mmStandard thread diameter and shortened length, for reduced available vertical bone.

Z5c-40-12Ø 4 mm, Ø shoulder 4.8 mm, insertion depth 12 mmStandard thread diameter for universal use in the maxilla and mandible with goo availability of vertical bone.

Z5c-50-08Ø 5 mm, Ø shoulder 6 mm, insertion depth 8 mmEnlarged thread diameter, especially suitable for wide alveolar ridges with a reduced amount of available vertical bone.

Z5c-A00Gerades AbutmentZirkolith® for cementing into Z5c implants.

Z5c-50-12Ø 5 mm, Ø shoulder 6 mm, insertion depth 12 mmEnlarged thread diameter, especially for wide jaws with very good vertical bone availability.

Z5c-HA12Winkelstückadapter 12 mmStainless steel, for screwing in Z5c implants with the angle piece.

Z5c-RA24Ratschenadapter 24 mmStainless steel, for screwing in Z5c implants with the torque ratchet.

Z5c-RA16Ratschenadapter 16 mmStainless steel, for screwing in Z5c implants with the torque ratchet.

Z5c-50-10Ø 5 mm, Ø shoulder 6 mm, insertion depth 10 mmEnlarged thread diameter, especially for wide jaws.

Z5c-A1515° abgewinkeltes AbutmentZirkolith® for cementing into Z5c implants.

Z5c-40-10Ø 4 mm, Ø shoulder 4.8 mm, insertion depth 10 mmStandard thread diameter for universaluse in the maxilla and mandible.

Two-piece Z5c implants are presently available in the following dimensions:

Implant configurations

Tools an accessories for two-piece Z5c implants

| Page 7

| Page 9

Z5m-40-10lc-25Ø 4 mm, Ø shoulder 4.4 mm, insertion depth 10 mmStandard thread diameter for sufficient vertical bone availability and a gingiva height of 0.5 – 1.0 mm*.

Z5m-40-08lbØ 4 mm, Ø shoulder 4.4 mm, insertion depth 8 mmStandard thread diameter and reduced length for reduced vertical bone availability.

Z5m-40-10lbØ 4 mm, Ø shoulder 4.4 mm, insertion depth 10 mmStandard thread diameter, with sufficient vertical bone availability.

Z5m-HA12lbAngle piece adapterStainless steel, for screwing in Z5mlb implants with the angle piece.

Z5m-RA16lcRatchet adapter 16 mmStainless steel, for screwing in Z5mlc implants with the torque ratchet.

Z5m-RA16lbRatchet adapter 16 mmStainless steel, for screwing in Z5mlb implants with the torque ratchet.

Z5m-RA24lbRatchet adapter 24 mmStainless steel, for screwing in Z5mlb implants with the torque ratchet.

Z5mlb-M2Lockball plastic matrix

Tools an accessories for single-piece Z5mlc implants

Tools und Zubehör für einteilige Z5mlb Implantate

Z5mlc / Z5mlb implants are presently available in the following dimensions:

Z5m-36-08lbØ 3.6 mm, Ø shoulder 4.4 mm, insertion depth 8 mmReduced thread diameter and reduced length especially for narrow alveolar ridges with reduced vertical bone availability.

Z5m-36-10lbØ 3.6 mm, Ø shoulder 4.4 mm, insertion depth 10 mmReduced thread diameter, especially for narrow alveolar ridges with sufficient vertical bone availability.

* Depends on whether the prosthesis is fabricated with 0.5 mm distance between the matrix and gingiva.

12 years of experience,guaranteed success*

2-piece

✔ EC-Certificate

* For

furt

her i

nfor

mat

ion,

ple

ase

see

war

rant

y on

ww

w.z

syst

ems.c

om |

** C

ompo

und

Surv

ival

Rat

e (C

SR) –

dat

a on

file

” Winner of multiple innovation awards” More than 27,000 successfully placed implants” Improved CSR** from 91% (2004)

to 98% (Zirkolith®/SLM®)” 10 year guarantee for the implant and the

prosthetic componentsk*

www.zsystems.com

HeadquarterZ-Systems AG, Bittertenstrasse 15, CH-4702 Oensingen, Switzerlandphone +41 (0)62 388 69 69, fax +41 (0)62 388 69 70support@zsystems.com, www.zsystems.com

GermanyZ-Systems GmbH, Lornsenstraße 48, D-24105 Kiel, Germanyphone +49 (0)431 77 59 96 45, fax 01802 999 100support@zsystems.com, www.zsystems.com04

/14

100

.223