product focus autopark - iko · pdf fileproduct focus description ikopro ... finish to asphalt...
TRANSCRIPT
IKOpro Autopark is a two-part, fast-curing liquid applied coating incorporating advanced resin technology. The product is designed for the decoration and protection of car park surfaces against the damaging effects of U.V light and chemicals. Autopark is also aggregated to produce a slip-resistant surface.
Product Focus
DescriptionIKOpro Autopark is a coloured liquid resin binder that incorporates fine aggregates to provide a slip resistant seamless finish. It is ideal for marking out pedestrian only areas, disabled bays, emergency vehicle parking, fire exit routes and keep clear areas. The product can also be applied as line hatchings, arrows, letters and symbols when used in conjunction with masking tape.
The pigmentation used in IKOpro Autopark coating is UV resistant to avoid any premature fading of the colour. In addition, the product is quick and easy to apply and with just a single coat application, can be trafficable in under 1 hour. IKOpro Autopark is cold applied and has an integral slip resistant finish. It is flexible and has a good resistance to wear and is capable of being maintained by over coating in the future, without the removal of existing layers.
IKOpro Autopark is used as a protective and decorative finish to asphalt surfaces, and can also be used as a complete surface finish for intermediate concrete/screed car park decks.
Simple, easy to apply system• One coat application in most cases using
a brush or roller
System Benefits
Long-lasting protective qualities
Resistant to pollution and fuel / chemical spillages
Range of colours available
Fast-curing formulation
Easy to apply with a brush or a roller
Unaffected by ponding or freeze-thaw cycles
One coat application trafficable in less than 1 hour
Cold applied, no heat required
Integral slip resistant finish.
ApplicationsIKOpro Autopark is suitable for much more than just car parks:
• Refurbishment of mastic asphalt
• Car parks
• Steps and stairwells
• Plant rooms
• Cycle ways
• Footpaths
• Walkways
Fast curing system• IKOpro Autopark has a rapid curing property
with the surface being trafficable in less than 1 hour
AUTOPARK
Colour Pack Size
Green
15kg 5kgRed
Bespoke*
*Bespoke colour = minimum order quantity of 500Kg applies.
Autopark for Interdeck and Bay Protection
Colour Pack Size
White5kg
Yellow
Autopark for Line Marking
Autopark for Interdeck and Bay ProtectionFully aggregated to provide a slip resistant surface.
Product Focus
Sales Support
T: 0844 873 1062 F: 0844 873 1067 E: [email protected]
Technical Services
T: 0844 412 7228 F: 0844 412 7229 E: [email protected]
IKO PLC, Appley Lane North, Appley Bridge, Wigan, Lancashire, WN6 9AB
Marketing
Including CPD, literature and product samples. T: +44(0)1257 256 091
www.ikogroup.co.uk
Application Rates
Typical Properties
Properties Result
Form Coloured Textured Liquid
Specific Gravity 1.85
Curing Time @ 20°C 40 minutes
Overcoat Time @ 20°C 40 minutes
Application Temperature Limits -15 to 40°C
Shelf Life 6 Months
UV Resistance Excellent
Chemical Resistance Excellent resistance to de-icing salts and spillages of petrol & soil
Skid Resistance Value (TRL Pendulum)
60 minimum
Wheel Tracking Test (HD28/94) Zero Erosion
Low Temperature Flexibility (ASTM C836 at 10°C)
No Visible Cracks
Crack Accommodation (BS 8110 Part 2 :1985)
Pass
Tensile Adhesion (BS EN 24624:1993)
Concrete Substrate > 1.0MPa Steel Substrate > 2MPa Asphalt Substrate > 0.5MPa
AUTOPARK
Autopark for Line MarkingNon aggregated.
Products Applications Coverage Rates
Sustrate
Sound mastic asphaltConcrete or old mastic asphalt
Light duty *Heavy duty
IKOpro Autopark – full surface coating
Coating of: Pedestrian paths, disable areas, and emergency vehicles bays
Number of coats 1 2 1
Coverage rate 0.5Kg / m2 0.5Kg / m2 / coat 1Kg / m2
Dry film thickness 0.5mm 1.0mm 1.0mm
IKOpro Autopark – Line marking
Marking of: Lines, hatched lines, direction arrows, wordings and symbols
Number of coats 1 2 1
Coverage rate 0.5Kg / m2 0.5Kg / m2 / coat 1Kg / m2
Dry film thickness 0.5mm 1.0mm 1.0mm
* Heavy duty applications: Marking & coating such as arrows and stop lines at the top and bottom of ramps and entrance/exit of shopping centres areas where cars are directed to turn hard, stop and start.