product guide - compustar · menu 1 – remote starter rs related conﬁ guration options menu 2...

REVISION DATE20170822

DOCUMENT NUMBER

NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

PRODUCT GUIDEFT-DC3-HC

www.idatalink.comAutomotive Data Solutions Inc. © 2017


GETTING STARTED

WELCOME

NEED HELP?

Congratulations on the purchase of your FT-DC3 solution. You are now a few simple steps away from enjoying your new remote starter unit with enhanced features. Before starting your installation, please ensure that your FT-DC3 module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

1 866 427-2999

[email protected]

idatalink.com/supportwww.12voltdata.com/forumwww.facebook.com/groups/idatatech

TABLE OF CONTENTS

Box Contents 3

Tach Programming Procedure 4

Remote Programming Procedure 5

Valet Mode Programming Procedure 6

Compatible Accessories 7

Online Module Settings 9

Module Diagnostics 10

Remote Starter Error Codes 11

Module Reset Procedure 12

www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-DC3-HC

PAGE 2 OF 12• 20170822


453

21

6

M6

FUNCTIONS DEFINED BY FIRMWARE

AUTOMATICTRANSMISSION

CUT LOOP

BOX CONTENTS

FT-DAS - 4 PIN REDBLE - 4 PIN YELLOW

RF PORT - 4 PIN BLUE

DRONE - 4 PIN GRAY

M6 - 6 PIN BLACK

PROGRAMMING BUTTON

M2 - 12 PIN BLACK

M3 - 10 PIN WHITE

LED 1LED 2

FT-DAS SENSITIVTY ADJUSTMENT DIALWEBLINK PORT - 4 PIN BLACK

HOOD SWITCHSTICKERS

MODULECM-DC3

79

3

10864

12

5

79

3

108

1112

64

12

5

79

3

108

111314

12

1517181920

16

64

12

5

453

21

6

M5

M4

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT07 BROWN•BLACK DOT - SIREN (+) OUTPUT07 BROWN•BLACK DOT - SIREN (+) OUTPUT08 WHITE/PURPLE•BLACK DOT - HORN (-) OUTPUT08 WHITE/PURPLE•BLACK DOT - HORN (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - RAP SHUTDOWN (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - RAP SHUTDOWN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT11 BROWN/BLACK•BLACK DOT - GROUND WHEN ARMED (-) OUTPUT11 BROWN/BLACK•BLACK DOT - GROUND WHEN ARMED (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT

01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT - E-BRAKE (-) INPUT03 PURPLE•SILVER DOT - DOOR (+) INPUT04 GREEN•SILVER DOT - DOOR (-) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (-) INPUT06 WHITE/BLUE•SILVER DOT - X-TRIGGER (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT08 BLUE•SILVER DOT - TRUNK (-) INPUT09 GRAY/BLACK•SILVER DOT - GLOW PLUG (+) INPUT10 TAN•SILVER DOT - EXT ALARM SENSOR (-) INPUT



M3

M2

RPS SENSOR - 4 PIN WHITE

SENSOR 2 - 4 PIN GREENALARM LED - 2 PIN WHITE

TEMP SENSOR - 2 PIN BLUE

BATTERY - 2 PIN WHITEM5 - 6 PIN BLUE

M4 - 20 PIN BLACK

2X

BOX CONTENTS - 1 OF 1

M1

42

8

1357

6

01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - POWER (30A)02 RED - POWER (30A)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)05 PINK - IGNITION (+)05 PINK - IGNITION (+)

07 RED - POWER (30A)07 RED - POWER (30A)08 BLACK - GROUND08 BLACK - GROUND

M1

06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)

M1 - 8 PIN BLACK


PAGE 3 OF 12• 20170822


01

ENGINESTARTSTOP

OFF ACC ON STARTSTARTSTART

02

03

04

05

06

TACH PROGRAMMING PROCEDURE - 1 OF 1

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.)

Wait, LED 2 will fl ash GREEN. (See the Module Diagnostics page)

Release the brake pedal.

Module Programming Procedure completed.


PAGE 4 OF 12• 20170822

>>

01

02

ENGINESTARTSTOP

OFF ACC ON STARTON

03

>>

04

05

06

>>

07

08

ENGINESTARTSTOP

OFF ACC ON STARTOFF

09

AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system.

Time restriction. Complete next step within 7 seconds.

Cycle ignition ON five times [5x OFF/ON] rapidly.

Parking Light will flash once [1x].

This step is only required for the ANT-1WFMX & ANT-2WFMX antennas. Press and release the antenna button. The antenna’s leds will turn solid RED.

Time restriction. Complete next step within 5 seconds from previous step.

Press once [1x] on LOCK button of aftermarket remote.

Parking Light will flash once [1x].

To program additional remotes: repeat steps 4 to 6 using each additional remote.

Wait, Parking Light will flash twice [2x].

Turn ignition to OFF position.

Aftermarket Remote Programming Procedure completed.


>>

01

02

ENGINESTARTSTOP

OFF ACC ON STARTON

03

04

05

ENGINESTARTSTOP

OFF ACC ON STARTOFF

06

>>

VALET MODE PROGRAMMING PROCEDURE - 1 OF 1

NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming.

Time restriction. Complete next step within 7 seconds.

Cycle ignition ON twice [2x OFF/ON] rapidly.

Press and release the BRAKE pedal three times [3x].

Parking Light will fl ash once [1x] then will fl ash twice [2x].

Set ignition to OFF position.

Valet Mode Programming Procedure completed.

To exit valet mode: repeat steps 1 to 5.


PAGE 6 OF 12• 20170822

U.S. Patent No. 8,856,780www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-DC3-HC

PAGE 7 OF 12• 20170822

COMPATIBLE ACCESSORIES - 1 OF 2

MODULETELEMATIC PORT

DRONE

(NC)

TELEMATIC KIT (accessory sold separately)

10 11 12 13 14 15 16

1 2 3 4 5 6 7 8

9

WEBLINK MOBILE (accessory sold separately)

MOBILE DEVICE PORT

OBDII CONNECTOR

4 PIN BLACK CABLEMODULE WEBLINK PORT

OBDII CONNECTOR

WEBLINK CABLE (required accessory sold separately)

WEBLINK CABLE

COMPUTERUSB PORT

4 PIN BLACK CABLE

MODULE WEBLINK PORT

U.S. Patent No. 8,856,780www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-DC3-HC

PAGE 8 OF 12• 20170822

COMPATIBLE ACCESSORIES - 2 OF 2

RF KIT

RF KIT (accessories sold separately)

ANTENNA

MODULERF PORT

TEMPERATURE SENSOR

TEMPERATURE SENSOR (accessories sold separately)

MODULE2 PIN BLUE

07 BROWN•BLACK DOT - SIREN (+) OUTPUT REDBLACK SIREN

ALARM LEDFT-DAS

MODULE12 PIN BLACK

MODULE2 PIN WHITE

MODULE4 PIN RED

ALARM KIT (accessories sold separately)


ONLINE MODULE SETTINGS - 1 OF 1

WEB PROGRAMMABLE MENUS DESCRIPTIONMENU 1 – Remote Starter RS related confi guration optionsMENU 2 – Doorlock Options Convenience feature confi guration optionsMENU 3 – Security Options Alarm activation and settingsMENU 4 – AUX function assignments Set transmitter AUX buttons controlsMENU 5 – Programmable outputs (POC) Set actions for programmable outputsMENU 6 – Pulse Timer Output Confi guration (PTO) Set duration for pulse timer outputs (if used)MENU 7 – Input Confi gurations Set inputs for Auto by fi rmware/Data/AnalogMENU 8 – Output Confi gurations Set outputs for Auto by fi rmware/Data/Analog

Programming options are avaible through Weblink and Weblink Mobile only.


PAGE 9 OF 12• 20170822


MODULE DIAGNOSTICS - 1 OF 1

TEST MODULE

LED

1 ST

ATUS

DIAG

NOS

TIC

I DURING MODULE PROGRAMMING

Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.

II DURING TACH PROGRAMMING

1 GREEN fl ash Tach signal programmed in Analog2 GREEN fl ashes Tach signal programmed in Data3 RED fl ashes No tach signal detected4 RED fl ashes System is in valet mode5 RED fl ashes Tach set for ‘VTS’. No tach programming required6 RED fl ashes Tach set for ‘assumed start’. No tach programming required

III DURING REMOTE START

Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.

IV WITH IGNITION OFF

Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.


PAGE 10 OF 12• 20170822


REMOTE STARTER ERROR CODES - 1 OF 1

REMOTE STARTER ERROR CODES:NOTES

[X] N

UMBE

R OF

PA

RKIN

G LI

GHT

FLAS

HES

DIAG

NOS

TIC

I WARNING: The following applies only when the parking lights are connected and supported by the system.

01 Engine running. 02 Key in ignition at ON position.

II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.

03 Door is open.04 Trunk is open.05 Foot brake is ON. 06 Hood is open.07 The reservation is OFF. (Manual transmission only)08 Tach failure.09 The vehicle is moving (VSS).10 System is in Valet Mode. 11 CAN communication failure12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Bypass problem.

REMOTE STARTER SHUTDOWN ERROR CODES:NOTES

[Y] N

UMBE

R OF

PA

RKIN

G LI

GHT

FLAS

HES

DIAG

NOS

TIC

I WARNING: The following applies only when the parking lights are connected and supported by the system.

01 Engine tach signal is lost.02 Emergency brake is lost.

II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote.

The parking lights will fl ash four [4x] times, then will fl ash [Y] number times to indicate an error code. See table.

03 Foot brake is ON. 04 Hood is open.05 Engine RPM limiter is ON.06 Glow plug timeout error.07 Vehicle is moving (VSS).08 N/A09 N/A10 Door is open.11 CAN communication failure during RS sequence.12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Takeover is not allowed.14 Shutdown error, board overheat protection.


PAGE 11 OF 12• 20170822


>>

01

02

03

04

05

06

07

08

>>

MODULE RESET PROCEDURE - 1 OF 1

The following procedure resets the module programming to the vehicle. It does not reset any settings confi gured online.

Disconnect all connectors from module except the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.

Disconnect the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.

PRESS AND HOLD the module’s programming button while connecting the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.

Wait, LED 1 will flash RED. RELEASE programming button.

LED 1 will turn RED for 2 seconds.

Module RESET completed.

Reconnect all connectors.

Repeat programming procedure.

Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.


PAGE 12 OF 12• 20170822

product guide - compustar · menu 1 – remote starter rs related conﬁ guration options menu 2...

Documents