Installation Instruction

Philips Electronics India Limited

Installation

Type : BRP020 1x10LED-HP/CW PSU GR

LED’s : 10

Voltage : 240 V, 50 Hz

IP Classification : IP65

Net Weight : 1.0kg

Max. Projected Area : 0.026 m²

Application : Outdoor use only

Mounting position : Horizontal

Application height : Upto 6m

Pole Outer Diameter : 32-40mm

Brp 020 Street Lighting Luminaire

Dimensions

375

21

71

75

1. Connect the red wire to live, Black wire to Neutral and the Green-yellow wire toground. After joining Properly insulate the wires using good quality Electricalinsulation tape.

2. Unfasten the Check nuts at the back of the mounting screws and loosen themounting screws to the required height as per the pole size.(Fig 2a, 2b)

3. Insert the pole up to the position shown in the drawing below (Fig 3a)4. Tighten the four mounting screws and then tighten the Check nuts fully.

(Fig 4a, 4b)

Un-screwCheck nuts

Pole should not gobeyond this point

Tighten fullyCheck nuts

FIG:2a FIG:3aFIG:2b

FIG:3a FIG:3b