product information nm-4 nm damper actuators - · pdf filecontents damper actuators,...
TRANSCRIPT
2. NM-4Product InformationDamper actuators NNMM
i002
7811
BC
EN
G-9
3001
-932
22-1
2.02
-1.5
M ·
Prin
ted
in S
witz
erla
nd ·
ZS
D ·
Sub
ject
to
tech
nica
l cha
nges
2
1.5 m2
–
8 Nm
NM
The complete range of damper actuators for general use in HVAC systems
AF(R)GM
15 Nm30 Nm
3 m26 m2
–
For more information, please contact your Belimo Representative or order any brochures you need by fax.
Type
Torq
ueS
prin
g r
etur
nfu
nctio
nF
or
dam
per
sup
to
ap
pro
x.
Fax to: BELIMO (address overleaf)
Please send us product brochures on the following damper actuators:
LM... SM... AM... GM... LF... AF... AFR... Electrical accessories
Please also send information on:
Motorized fire and smoke dampers Variable air-volume control (VAV-Control) Rotary-motion actuators and valves Linear-motion actuators and valves
Please call us back
Company:
Name:
Address:
Post code:
Tel.:
E-Mail:
Sender
Country:
Fax:
Date:
LM
4 Nm
0.8 m2
–
SM
15 Nm
3 m2
–
AM
18 Nm
3.6 m2
–
LF
4 Nm
0.8 m2
i009
8805
BC
Contents
Damper actuators, Open/Close
NM24 4
NM230 5
Damper actuators, modulating
NM24-SR 6
NM24-SRS 7
Control and monitoring functions 8
Electrical accessories
Auxiliary switches SN1, SN2 9
Mounting instructions
Damper actuators 10
Auxiliary switches 10
NM24-SRS
NM24-SR
NM230NM24
Note
Using BELIMO damper actuatorsThe actuators listed in this catalogue are in-tended for the operation of air dampers in HVAC systems.
Torque requirementsWhen calculating the torque required to operatedampers, it is essential to take into account allthe data supplied by the damper manufacturerconcerning cross sectional area, design, mount-ing and air flow conditions.
3
Selection table
EN
G-9
3001
-932
22-1
2.02
-1.5
M ·
Prin
ted
in S
witz
erla
nd ·
ZS
D ·
Sub
ject
to
tech
nica
l cha
nges
Torque 8 Nm
Nominal voltage AC 24 V • • •DC 24 V • •AC 230 V •
Running time 75...150 s • •150 s • •
Control Open/Close Single-wire • •2-wire •
Modulating DC 0...10 V • •Direction of rotation reversible (right/left) • • • •Manual operation by pushbutton • • • •Mechanical angle of rotation limiting • • • •Automatic angle of rotation and running time adjustment • •Continuous position feedback • •Adjustable electrical working range •Damper rotation with universal spindle clamp • • • •
Actuators with damper rotation for square form-fit spindles (8 mm) and conforming to US standards on request.
BC
EN
G-9
3001
-932
22-1
2.02
-1.5
M ·
Prin
ted
in S
witz
erla
nd ·
ZS
D ·
Sub
ject
to
tech
nica
l cha
nges
Dampers up to approx. 1.5 m2
Open/Close actuator(AC/DC 24 V)
Reversible
Improved functional safetyThe damper actuator has no limit switches and is overload-proof. It stopsautomatically when it reaches the damper or actuator end stop.
Easy functional checkA functional check of damper operationis simplicity itself: the gearing can be dis-engaged by simply pressing a pushbut-ton on top of the case. While the push-button remains depressed, the dampercan be operated by hand.
Simple installationThe damper actuator is fitted with a uni-versal spindle clamp for quick and easymounting directly on the damper spindle.The actuator is supplied with an anti-rotation strap for fixing it in position.
Electrical accessories SN1, SN2 Auxiliary switches, page 9
Mounting instructions, page 10
ImportantRead the notes about the use and torquerequirements of the damper actuators onpage 3.
Wiring diagram
Connect via safetyisolating transformer.!
DC 24 VAC 24 V
DC 24 VAC 24 V
NM24Parallel connection of several actuatorsis possible. Power consumption mustbe observed.
1 2 3
- +
T ~Single-wire control 2-wire control
- +
T ~1 2 3
NM24
Dimensions
Technical data NM24
Nominal voltage AC 24 V 50/60 Hz, DC 24 V
Nominal voltage range AC/DC 19.2...28.8 V
For wire sizing 3.5 VA
Power consumption 2 W
Connecting cable 1 m long, 3×0.75 mm2
Direction of rotation selected with L/R switch
Torque min. 8 Nm (at rated voltage)
Angle of rotation max. 95° (adjustable by mechanical stops)
Running time 75…150 s (0…8 Nm)
Sound power level max. 35 dB (A)
Position indication mechanical
Protection class (safety low voltage)
Degree of protection IP 54 (bottom cable entry)
Ambient temperature range – 20… + 50 °CNon-operating temperature – 40… + 80 °CHumidity test to EN 60335-1
EMC CE according to 89/336/EEC, 92/31/EEC, 93/68/EEC
Maintenance maintenance free
Weight 800 g
NM24 Damper actuator 8 Nm
4
p00
0480
3
8...20
139
26.5 6.9
585.
281
36.5
105.6
22
d00
0390
2
w03
4580
5
III
BC
EN
G-9
3001
-932
22-1
2.02
-1.5
M ·
Prin
ted
in S
witz
erla
nd ·
ZS
D ·
Sub
ject
to
tech
nica
l cha
nges
5
Dampers up to approx. 1.5 m2
Open/Close actuator (AC 230 V)
Control by single-pole contact(single-wire control)
Improved functional safetyThe damper actuator has no limit switches and is overload-proof. It stopsautomatically when it reaches the damper or actuator end stop.
Easy functional checkA functional check of damper operationis simplicity itself: the gearing can be dis-engaged by simply pressing a pushbut-ton on top of the case. While the push-button remains depressed, the dampercan be operated by hand.
Simple installationThe damper actuator is fitted with a uni-versal spindle clamp for quick and easymounting directly on the damper spindle.The actuator is supplied with an anti-rotation strap for fixing it in position.
Electrical accessoriesSN1, SN2 Auxiliary switches, page 9
Mounting instructions, page 10
ImportantRead the notes about the use and torquerequirements of the damper actuators onpage 3.
Wiring diagram
AC 230 V
1 2 3
NM230Parallel connection of several actuatorswith 1-wire control is possible. Powerconsumption must be observed.
N L1To isolate from the main power supply, the systemmust incorporate a device which disconnects the phaseconductors (with at least a 3 mm contact gap).
Dimensions
Technical data NM230
Nominal voltage AC 230 V 50/60 Hz
Nominal voltage range AC 198… 264 V
For wire sizing 18 VA
Power consumption 2 W
Connecting cable 1 m long, 3×0.75 mm2
Direction of rotation selected with L/R switch
Torque min. 8 Nm (at rated voltage)
Angle of rotation max. 95° (adjustable by mechanical stops)
Running time 75…150 s (0…8 Nm)
Sound power level max. 35 dB (A)
Position indication mechanical
Protection class II (all insulated)
Degree of protection IP 54 (bottom cable entry)
Ambient temperature range – 20… + 50 °CNon-operating temperature – 40… + 80 °CHumidity test to EN 60335-1
EMC CE according to 89/336/EEC, 92/31/EEC, 93/68/EECLow Voltage Directive CE according to 73/23/EEC
Maintenance maintenance free
Weight 800 g
NM230 Damper actuator 8 Nm
p00
0580
3
8...20
139
26.5 6.9
585.
281
36.5
105.6
22
d00
0390
2
w03
4680
5
BC
Direction of rotation selected with L/R switch(at Y = 0 V) at switch position L resp. RTorque min. 8 Nm (at rated voltage)
Angle of rotation max. 95° (adjustable by mechanical stops)
NM24-SR Damper actuator 8 Nm
6
EN
G-9
3001
-932
22-1
2.02
-1.5
M ·
Prin
ted
in S
witz
erla
nd ·
ZS
D ·
Sub
ject
to
tech
nica
l cha
nges
EMC CE according to 89/336/EEC, 92/31/EEC, 93/68/EECMaintenance maintenance freeWeight 900 g
Override control Y open or 0 V = 0% angle of rotationY at AC 24 V = 100% angle of rotation
Running time 150 s, regardless of the mechanically limited angleof rotation from 0…35° to 0…95°
Sound power level max. 35 dB (A)Position indication mechanicalProtection class (safety low voltage)
Degree of protection IP 54 (bottom cable entry)
Dampers up to approx. 1.5 m2
Modulating damper actuator(AC/DC 24 V)
Control DC0…10 V and positionfeedback DC2…10 V
Self-adapting, automatic angleof rotation and running time adjustment
Improved functional safetyThe damper actuator has no limit switches and is overload-proof. It stopsautomatically when it reaches the damper or actuator end stop.
Automatic commissioning,easy functional checkWhen the power supply is first switchedon, or when the override push button ispressed, the actuator performs an auto-matic function test. It runs to each endposition and, in the process, adapts itselectrical working range of DC 2…10 Vand running time of 150 s to the effectivemechanical angle of rotation of thedamper. After performing this function,the actuator moves to the position de-manded by the positioning signal.A functional check of damper operationis simplicity itself: the gearing can bedisengaged by simply pressing a push-button on top of the case. While thepushbutton remains depressed, thedamper can be operated by hand.
Simple installationThe damper actuator is fitted with a uni-versal spindle clamp for quick and easymounting directly on the damper spindle.The actuator is supplied with an anti-rotation strap for fixing it in position.
Electrical accessories *(see Doc. 2. Z-…)SN1, SN2 Auxiliary switches, page 9*SG…24 Positioners*ZAD24 Digital position indicator
Control and monitoring functions, page 8
Mounting instructions, page 10
ImportantRead the notes about the use and torquerequirements of the damper actuators onpage 3.
Wiring diagram
Control manufacturers: ABB, AEG, Bälz, Centra, Con-trolli, C.S.I., Danfoss, DIGI’Control, Elesta, GA, H.C.System, Honeywell, Inel, IWK, Johnson, Kieback & Peter,Landis & Staefa, Messner, Priva, RAM R+S, Samson,Satchwell, Sauter, SE-Electronic, Siemens, TA, Trend.
Connect via safetyisolating transformer.!
Y DC 0...10 V
Y U
1 2 3 4
U DC 2…10 V
NM24-SR
Measuring voltage U for position indication oras master-slave control signal.
Parallel connection of several actuators is possible.Note power consumption data.
DC 24 VAC 24 V
- +
T ~
T ~- +
Dimensions
Technical data NM24-SRNominal voltage AC 24 V 50/60 Hz, DC 24 VNominal voltage range AC 19.2...28.8 V, DC 21,6…28.8 VFor wire sizing 3 VAPower consumption 1.3 W running, 0.5 W at restConnecting cable 1 m long, 4×0.75 mm2
Control signal Y DC 0…10 V @ input resistance = 100 kΩOperating range DC 2…10 V (for 0…100% angle of rotation)
Measuring voltage U DC 2…10 V @ ≤ 0.7 mA (for 0…100% angle of rotation)
Synchronisation tolerance ± 5%
Ambient temperature range – 20… + 50 °CNon-operating temperature – 40… + 80 °CHumidity test to EN 60335-1
8...20
139
26.5 6.9
585.
281
36.5
105.6
22
d00
0390
2
p00
0680
3w
0347
211
III
BC
NM24-SRS Damper actuator 8 NmE
NG
-930
01-9
3222
-12.
02-1
.5M
· P
rinte
d in
Sw
itzer
land
· Z
SD
· S
ubje
ct t
o te
chni
cal c
hang
es
7
Measuring voltage U DC 2…10 V @ ≤ 0.7 mA (for 0…100% angle of rotation)
Synchronisation tolerance ± 5%Override control Y open or 0 V = 0% angle of rotation
Y at AC 24 V = 100% angle of rotationDirection of rotation selected with L/R switch(at Y = 0 V) at switch position L resp. RTorque min. 8 Nm (at rated voltage)Angle of rotation max. 95° (adjustable by mechanical stops)
Running time 150 s, regardless of the mechanically limited angleof rotation from 0…35° to 0…95°
Sound power level max. 35 dB (A)Position indication mechanicalProtection class (safety low voltage)Degree of protection IP 54 (bottom cable entry)
Ambient temperature range – 20… + 50 °CNon-operating temperature – 40… + 80 °CHumidity test to EN 60335-1EMC CE according to 89/336/EEC, 92/31/EEC, 93/68/EECMaintenance maintenance freeWeight 900 g
Starting point Uo adjustable DC 0…8 VSpan ∆U adjustable DC 2…10 V (for 0…100% angle of rotation)Factory setting Uo = DC 0 V, ∆U = DC 10 V
Dampers up to approx. 1.5 m2
Modulating damper actuator(AC 24 V)Control DC0…10 V (DC8…18 V)and position feedbackDC2…10 VAdjustable electrical workingrangeSelf-adapting, automatic angleof rotation and running time adjustmentImproved functional safetyThe damper actuator has no limit switches and is overload-proof. It stopsautomatically when it reaches the damper or actuator end stop.
Automatic commissioning,easy functional checkWhen the power supply is first switchedon, or when the override push button ispressed, the actuator performs an auto-matic function test. It runs to each endposition and, in the process, adapts itselectrically defined working range andrunning time of 150 s to the effective mechanical angle of rotation of the damper. After performing this function,the actuator moves to the position de-manded by the positioning signal.A functional check of damper operationis simplicity itself: the gearing can bedisengaged by simply pressing a push-button on top of the case. While thepushbutton remains depressed, thedamper can be operated by hand.
Simple installationThe damper actuator is fitted with a uni-versal spindle clamp for quick and easymounting directly on the damper spindle.The actuator is supplied with an anti-rotation strap for fixing it in position.
Electrical accessories *(see Doc. 2. Z-…)SN1, SN2 Auxiliary switches, page 9*SG…24 Positioners*ZAD24 Digital position indicator
Control and monitoring functions, page 8
Mounting instructions, page 10
ImportantRead the notes about the use and torquerequirements of the damper actuators onpage 3.
Wiring diagram
(DC 8...18 V)Y DC 0...10 V
AC 24 V Connect via safetyisolating transformer.!
Y U
T ~1 2 3 4
T ~
U DC 2...10 V Measuring voltage U for position indication oras master-slave control signal.
Parallel connection of several actuators is possible.Note power consumption data.
NM24-SRS
Control manufacturers: ABB, AEG, Bälz, Centra, Con-trolli, C.S.I., Danfoss, DIGI’Control, Elesta, GA, H.C.System, Honeywell, Inel, IWK, Johnson, Kieback & Peter,Landis & Staefa, Messner, Priva, RAM R+S, Samson,Satchwell, Sauter, SE-Electronic, Siemens, TA, Trend.
Dimensions
Nominal voltage AC 24 V 50/60 HzNominal voltage range AC 19.2...28.8 VFor wire sizing 3 VAPower consumption 1.3 W running, 0.5 W at restConnecting cable 1 m long, 4×0.75 mm2
Control signal Y DC 0…18 V @ input resistance = 100 kΩ
Technical data NM24-SRS
w03
4880
5p
0007
803
8...20
139
26.5 6.9
585.
281
36.5
105.6
22
d00
0390
2
III
BC
EN
G-9
3001
-932
22-1
2.02
-1.5
M ·
Prin
ted
in S
witz
erla
nd ·
ZS
D ·
Sub
ject
to
tech
nica
l cha
nges
Control and monitoring functions NM24-SR(S)
8
Function monitoring
Y U NM24-SR(S)
1 2 3 4
Procedure
AC/DC 24 V at terminals 1 and 2
Disconnect terminal 3:
link terminals 2 and 3:– actuator runs in the opposite direction
– For direction of rotation "L": actuator runs
– For direction of rotation "R": actuator runs
Y
1 2 3
Master-slave control (depending on position)
NM24-SR(S)
4 1 2 3 4
to next actuator
Masteractuator
Note ± 5% synchronisationtolerance between actuators
Slaveactuator
U Y NM24-SR(S)U
Y DC 0...10 V
Y
1 2 3
Override control
NM24-SR(S)
Parallel connecting of further actuators ispossible. Note power consumption data.
Y DC 0...10 V
ab
4
U
a b
control mode
Reversingswitch R
Reversingswitch L
Y
1 2 3
Remote control 0...100%
1 2 3SGA24, SGF24SGE24
Positioner
4Y
T ~
Z
NM24-SR(S)
Parallel connection of furtheractuators is possible (up to 10).
Y
1 2 3
T ~
1 2 3SGA24, SGF24SGE244
Y
T ~
Z
NM24-SR(S)
Minimum position
Y DC 0...10 V(from controller)
100%Angle of rotation
0%
Y [ V ]
10 V
min.
0 V
AC 24 V
4
U
4
U
Parallel connection of furtheractuators is possible (up to 10).
Positioner
!Connect viasafety isolatingtransformer!
Connect viasafety isolatingtransformer
Y
1 2 3
Position indication
NM24-SR(S)
4
U
T ~
AC 24 V
1 2 3 ZAD244
+-
Direction ofrotation
!Connect viasafety isolatingtransformer
T ~AC 24 V
T ~
- +
T ~
- +
T ~- + T ~
- +
!Connect viasafety isolatingtransformerDC 24 V
AC 24 V
- +
T ~
!Connect viasafety isolatingtransformerDC 24 V
AC 24 V
- +
T ~
T ~
- +
T ~
- +
T ~
- +
!Connect viasafety isolatingtransformerDC 24 V
AC 24 V
- +
T ~
Type NM24-SRS doesn’twork with DC 24 V.!
w03
4921
1
BC
Compatible with NM…damper actuators
ApplicationThe auxiliary switch units SN1 and SN2are designed to fit damper actuatorsfrom the NM range and are intended forthe signalling of end positions or forperforming switching functions at any an-gular position.
Mode of operationA driver disk is positively attached to thespindle clamp so that there is a direct linkbetween its position and the microswitchoperating cams.The switching points can be set any-where in the range from 0 to 10 by meansof a dial. The switch position can be readoff at any time.
InstallationThe auxiliary switch units plug directly onto the spindle clamp of the NM… damperactuators. The guide slots between thehousing and the switch unit ensure proper location. The unit is secured tothe motor housing with a prefitted screw.
NoteInstructions for fitting and setting theswitches will be found on page 10.
EN
G-9
3001
-932
22-1
2.02
-1.5
M ·
Prin
ted
in S
witz
erla
nd ·
ZS
D ·
Sub
ject
to
tech
nica
l cha
nges
SN1, SN2 Auxiliary switches
9
Wiring diagram
SN1
S1 S2 S3
SN2
S1 S2 S3 S4 S5 S6
Technical data SN1 SN2
Number of switches 1×SPDT 2×SPDT
Switching capacity 6 A (2.5 A) AC 250 V
Connecting cable 1 m, 3×0.75 mm2 1 m, 6×0.75 mm2
Switching point Adjustable over full actuator rotation 0…10Pre-setting by scale possible
Protection class II (all-insulated)
Degree of protection IP 54
Ambient temperature range – 30… + 50 °CNon-operating temperature – 40… + 80 °CHumidity test to EN 60335-1
Weight 125 g 175 g
p00
0870
7w
0009
707
m00
0870
7
BC
Mounting instructions for damper actuator NM…
EN
G-9
3001
-932
22-1
2.02
-1.5
M ·
Prin
ted
in S
witz
erla
nd ·
ZS
D ·
Sub
ject
to
tech
nica
l cha
nges
10
Mounting instructions for auxiliary switches SN1, SN2
min.38mm
8...20
3
2
1
3
6...7 Nm
2
1≈1mm
1 2
3 4 5
1 2
53 4
m00
0980
7m
0010
707
BC
11
BC
EN
G-9
3001
-932
22-1
2.02
-1.5
M ·
Prin
ted
in S
witz
erla
nd ·
ZS
D ·
Sub
ject
to
tech
nica
l cha
nges
Air applications Water applications
Contact the following for further information:
Belimo Headquarters
CH BELIMO Holding AGBrunnenbachstrasse 18340 Hinwil, SwitzerlandTel. +41 (0)43 843 61 11Telefax +41 (0)43 843 62 68E-Mail: [email protected]: www.belimo.ch
Belimo Subsidiaries
AT/ BELIMO AutomationHR/ Handelsgesellschaft m.b.H.HU/ Geiselbergstrasse 26–32SK/ 1110 Wien, AustriaSL Tel. +43 (0)1 749 03 61-0
Telefax +43 (0)1 749 03 61-99E-Mail: [email protected]
AU BELIMO Actuators Pty. Ltd.Unit 10, 266 Osborne AvenueClayton South, VIC 3169AustraliaTel. +61 (0)3 9551 0201Telefax +61 (0)3 9551 0215E-Mail: [email protected]
CA BELIMO Aircontrols (CAN), Inc.5716 Coopers Ave., Units 14&15Mississauga, Ontario L4Z 2E8CanadaTel. +1 (1)905 712 31 18Telefax +1 (1)905 712 31 24E-Mail: [email protected]
CH BELIMO Automation AGSales SwitzerlandBrunnenbachstrasse 18340 Hinwil, SwitzerlandTel. +41 (0)43 843 62 12Telefax +41 (0)43 843 62 66E-Mail: [email protected]: www.belimo.ch
DE BELIMO Stellantriebe Vertriebs GmbH Welfenstr. 27, Postfach 72 02 3070599 Stuttgart, GermanyTel. +49 (0)711 1 67 83-0Telefax +49 (0)711 1 67 83-73E-Mail: [email protected]: http://www.belimo.de
ES BELIMO Ibérica de Servomotores, S.A.C/San Romualdo, 12–1428037 Madrid, Spain Tel. +34 91 304 11 11Telefax +34 91 327 25 39E-Mail: [email protected]
FR BELIMO ServomoteursZ.A. de Courtry33, Rue de la Régale77181 Courtry, FranceTél. +33 (0)1 64 72 83 70Téléfax +33 (0)1 64 72 94 09E-Mail: [email protected]
GB BELIMO Automation UK LimitedThe Lion CentreHampton Road West Feltham, Middlesex, Great Britain TW 13 6DSTel. +44 (0)20 8755 4411Telefax +44 (0)20 8755 4042E-Mail: [email protected]
HK BELIMO Actuators Ltd.Room 208, 2/FNew Commerce Centre19 On Sum Street, Shatin, N.T.Hong KongTel. +852 26 87 17 16Telefax +852 26 87 17 95E-Mail: [email protected]
PL BELIMO Silowniki S.A.ul. Zagadkl 2102-227 Warszawa, PolandTel. +48 (0)22 886 53 05Telefax +48 (0)22 886 53 08E-Mail: [email protected]
SG BELIMO Actuators Pte Ltd2, Jurong East Street 21#04-31F IMM BuildingSingapore 609601Tel. +65 6564 9828Telefax +65 6564 9038E-Mail: [email protected]
US BELIMO Aircontrols (USA), Inc.43 Old Ridgebury RoadP.O. Box 2928Danbury, CT 06810 USATel. +1 (1)203 791 99 15Telefax +1 (1)203 792 29 67E-Mail: [email protected] Internet: www.belimo.com
Belimo Representatives andAgencies
AE BELIMO AutomationMiddle East OfficeP.O. Box 55427 Dubai, U.A.E.Tel. +971 (0)4 387 417Telefax +971 (0)4 387 415E-Mail: [email protected]
IE Safegard Systems Ltd.Systems House, Unit 34Southern Cross Business ParkBray, Co Wicklow, IrelandTel. +353 (0)1 2761600Telefax +353 (0)1 2761611E-Mail: [email protected]
IL Shemer RepresentationsP.O. Box 29656101 Yehud, IsraelTel. +972 3 536 51 67Telefax +972 3 536 05 81E-Mail: [email protected]
IN BELIMO Vitek Air ControlsC-114 Lancelot, First Floor S.V. Road, Borivali (West)Mumbai 400 092, IndiaTel. +91 22 5695 9439Telefax +91 22 2806 2163E-Mail: [email protected]
IS Hitatækni ehf.Langholtsvegi 109104 Reykjavik, IcelandTel. +354 5 88 60 70Telefax +354 5 88 60 71E-Mail: [email protected]
IT BELIMO Servomotori S.r.l.Via Stezzano, 524050 Zanica BG, ItalyTel. +39 035 67 26 82Telefax +39 035 67 02 00E-Mail: [email protected]
KR HANMO Corporation3rd Floor, Yeosam Bldg. 648-23Gangnam-Ku, Seoul, KoreaTel. +822 3453 8225Telefax +822 3453 8228
LB Energy Center (EC)Hamra, Leon Street, Shatilla, Bldg. 4th Floor, P.O. Box 113-6955Beirut, LebanonTel. +961 (0)1 35 38 23Telefax +961 (0)1 35 38 23E-Mail: [email protected]
NL/ BELIMO Servomotoren BV BE/ BENELUXLU Postbus 300, 8160 AH Epe
Radeweg 25, 8171 MD VaassenNetherlandsTel. +31 5 78 57 68 36Telefax +31 5 78 57 69 15E-Mail: [email protected]
NO BELIMO Spjeldmotorer A/SKonowsgate 5 0192 Oslo 1, NorwayTel. +47 22 70 71 71Telefax +47 22 70 71 70E-Mail: [email protected]
PH BELIMO Actuators PhilippinesRm.# 507 Anita Build., 5th Floor1300 Quezon Ave.,Cor.South Ave.1103 Quezon City, PhilippinesTel. +63 (2) 373 5440Telefax +63 (2) 373 5424E-Mail: [email protected]
RO SC Mano Construct srlStr. Cameliei nr 5, sector 1Bucuresti, RomaniaTel. +40 212 126 993Telefax +40 212 126 995E-Mail: [email protected]
RU BELIMO Servomotors Russia Ltd.Nizhnyaya Pervomaiskaya, 46 Bld.1, Office 303105203 Moscow, Russia Tel. +7 095 965 74 64Telefax +7 095 965 74 73E-Mail: [email protected]
SE BELIMO Spjällmotorer ABHägerstens Allé 88129 37 Hägersten, SwedenTel. +46 (0)8 88 07 00Telefax +46 (0)8 97 85 75 E-Mail: [email protected]
SY Philippe A. JebranP.O. Box 7791Damascus, SyriaTel. +963 11 231 6586Telefax +963 11 231 4052E-Mail: [email protected]
TR BELIMO Otomasyon A.S.Keyap Sitesi No. 20TR-81260 Y. DudulluIstanbul, TurkeyTel. +90 216 527 98 70Telefax +90 216 527 98 71E-Mail: [email protected]
TW Chianseng Enterprise Co. Ltd.2F, No. 21, Tong Fong StreetTaipei, TaiwanTel. +886 2 27 08 77 80Telefax +886 2 27 02 90 90E-Mail: [email protected]
UA BELIMO Ukraine S.A.R.34-A, Ul. Yurkovskaya, Appt.No 2254080 Kiev, UkraineTel./Telefax +380 44 463 7586E-Mail: [email protected]
ZA BELIMO Actuators Southern Africa ccP. O. Box 2483Alberton 1450, South AfricaTel. +27 (0)11 868 5681Telefax +27 (0)11 900 2673E-Mail: [email protected]
BG BELIMO Bulgaria Ltd.j.k. Lagera, 3 Smolyanska Str.bl. 56, entr. B, ap. 501612 Sofia, BulgariaTel. +3592 952 3470/1Telefax +3592 545 995E-Mail: [email protected]
CN BELIMO Actuators Ltd.18 FA3, 585 Longhua West-Road200232 Shanghai, ChinaTel. +86 21 6469 2895Telefax +86 21 6469 2909E-Mail: [email protected]
CN BELIMO BeijingRm 605, Beijing Hai Chang Edifice, 44, Liang Ma Qiao Road Chao Yang District100016 Beijing, ChinaTel. +86 10 6462 1382Telefax +86 10 6462 1383E-Mail: [email protected]
CY R.E.S. Ltd.P.O. Box 8297Nicosia, CyprusTel. +357 (0)2 51 10 07Telefax +357 (0)2 49 65 47E-Mail:[email protected]
CZ BELIMO CZ (Ing. Ivar Mentzl)Charkovská 1610100 Praha 10, Czech RepublicTel. +420 (0)2 717 4 0 311Telefax +420 (0)2 717 43 057 E-Mail: [email protected]
DK BELIMO A/SThomas Helstedsvej 7A8660 Skanderborg, DenmarkTel. +45 86 52 44 00Telefax +45 86 52 44 88E-Mail: [email protected]
EE BELIMO Balticum ASTöri 10 d11313 Tallinn, EstoniaTel. +372 6 140 811Telefax +372 6 140 812E-Mail: [email protected]
FI Oy Suomen BELIMO AbInsinöörinkatu 200880 Helsinki, FinlandTel. +358 (0)9 75 11 65 00Telefax +358 (0)9 75 11 65 31E-Mail: [email protected]
GR BELIMO Air Controls29, Tagm. Plessa, KallitheaGR 17674 Athens, GreeceTel. +30 (2)10 94 00 766Telefax +30 (2)10 94 00 767E-Mail: [email protected]
Standard actuators andspring-return actuators forair control dampers inHVAC systems
Innovation, Quality and Consultancy:A partnership for motorizing HVAC actuators
Safety actuators for mo-torizing fire and smokeextraction dampers
VAV systems for individualroom air control
Mixing actuators and mo-torized ball valves forHVAC water circuits
Globe valves and intelligentlinear actuators – also forleading makes of valve