product news 2016 - linmot en · coe, cia402, soe, and profidrive are also supported. the rs232...

PRODUCT NEWS 2016

www.linmot.com

2 PRODUCT NEWS 2016

P10-54 Family of Linear Motors

LinMot has expanded its product range of 3-phase 230-480VAC linear motors, usable with LinMot drivers or third-party controllers, adding the new P10-54 family of motors. This product brings to market a compact, tubular linear motor in the medium power range for dynamic positioning tasks or for replacing pneumatics.

Optionally equipped with a 1Vpp sin/cos encoder or an A/B incremental encoder, the linear motors can be controlled by any manufacturer‘s drives. This makes them easy to integrate into an existing controls concept, using the drives that the machine or systems supplier has selected. Alternative-ly, the linear motors can be controlled by LinMot series C1400 drives for 230VAC or E1400 drives for 3x400VAC.

The P10-54 motors are available in 4 sizes, with forces ranging from 350 to 900 N. The extensive selection of sliders produces a closely tiered range of strokes, with a maximum stroke of up to 2000 mm. The motor data, with accelerations from 400 m/s2 and a maximum speed of over 10 m/s, leave nothing to be desired in terms of dynamics. The rotating TWIN plug with push-pull connectors for power and encoder cables provides the greatest possible flexibility in the cable exit, guaranteeing reliable, time-saving cable routing in the system. The single-piece clamping flange supports fast and easy installation of the stator in the system.

3P10-54 Family oF linear motors

» 230VAC and 3 x 400VAC technology

» Forces up to 900 N » Stroke range up to 2000 mm » 1Vpp sin/cos or A/B

incremental encoder » Extremely high dynamics » Rotating push-pull TWIN

connector for power and encoder cables

» One-piece clamping flange » Can also be controlled by

standard third-party servo drives

Stroke up to mm 2240

Max. Force N 892

Nominal Force N 255

Peak Velocity m/s 11.1

Peak Acceleration m/s2 413

Repeatability mm 0.01

Stator Length mm 222-402

Slider Length mm 350-2500

Motors from the P10-54 family will be available starting in the 2nd quarter of 2016.

4 PRODUCT NEWS 2016

P04-37x120F/135-HP-rLinear motor

At this year‘s SPS IPC Drives conference, LinMot presents the newly developed model P04 linear motor. This motor has all the benefits of the fami-liar tubular linear motor and the additional advantage of an integrated linear guidance. The P04-actuator can be equipped with mechanical accessories which are known from pneu-matics. Thus, the replacement of pneumatic is even easier, because all pneumatic assem-bly options can be realized.

Under the compact aluminum housing of this new motor is a powerful LinMot PS01-

37x120F-HP that puts the precision shaft in motion. The shaft is guided by a linear ball bearing and has a maximum stroke of 135 mm. With the front side M10x1.25 thread, loads of up to 255 N can be quickly and easily attached to the shaft. Additional installation options are provided by the profile grooves and T-slots found on every side of the housing.

With a maximum acceleration of 50 m/s2, precise and dynamic motions are the main focus of the new motor model. In addition, transverse loads are absorbed by the integrated bearing, so that simp-le applications like “Pusher” can be realized in a very simple way without additional components.

5P04-37x120F/135-HP-r linear motor

» Peak force up to 255 N » Stroke up to 135 mm » Hardened rod capable to

handle side load » Ø 16 mm rod with M10x1.25

thread » Mounting connection

according to » ISO pneumatic cylinder » Stator encapsulated (IP54)

Stroke up to mm 135

Max. Force N 255

Nominal Force N 92



Repeatability mm ±0.05

Stator Length mm 400

Slider Length mm 429

The P04-37x120F/135-HP-R linear motor will be available starting in December 2015.

6 PRODUCT NEWS 2016

Wherever explosive gases or vapors are mixed with air, or flammable dust can occur, special electrical drives are required.

LinMot series P01-48 motors are now certified for this purpose as EX-protected motors in accordance with Directive 94/9/EC as of October 2015. Device classifications 2G and 2D mean that the devices can be used in an explosive atmosphere consisting of gases, vapors, mist, or dust. The drives are thus optimally designed for use in printing machines, painting lines, plastic-processing machines, or in the chemical or pharmaceutical field.

The motors have been purposefully designed to be very compact and do not have unnecessary edges, corners, holes, and threaded connections. This avoids locations where explosive material can collect and minimizes the risk of a potential ignition source due to uneven heating. Completely encapsulated in stainless steel, they do not need any seals. All joint connections are welded.

Linear Motors with atex and ieCex certification

7linear motors witH atex and ieCex CertiFiCation

» Welded connections » Completely encapsulated

(IP69K) » Optional integrated water

cooling » Additional, redundant

temperature monitoring » For use in protection zones

1 / 2 (gas) » Suitable for use in

protection zones 21 / 22 (dust)

Stroke up to mm 980

Max. Force N 496-888

Nominal Force N 241-360




Stator Length mm 345-465

Slider Length mm 500-1400

Both sizes, P01-48x240 and P01-48x360, are available now from LinMot.

To completely seal off the motor, the windings and other internal components of the stator are potted in epoxy resin. This guarantees optimal protection of the motor and eliminates the risk of electrical arcing. LinMot ATEX motors are planned in this way, that except of the motor and supply, no further elements need to be certified in the hazardous area.

8 PRODUCT NEWS 2016

Stainless steel Linear Guides H01

After introducing the stainless steel motor, now the matching guide is being introduced to the market. Together with the stainless steel motors and high protection class IP69K, this complete system is suitable for the direct use even under difficult ambient conditions. The stainless steel system is designed optimally to handle the use of aggressive liquids and foam cleaners, which is common in the pharmaceutical or food industry.

The guide consists of two guide blocks, two guide shafts, and a load-mounting plate, all made from rustproof steel (mat. no. 1.4404, AISI 316 L). The precise linear motion is provided by hardened shafts supported in plastic sliding bearings. The bearing material is specially designed for use in food products and medical applications and is certified to FDA standards.

The design is characterized by its conveniently rounded surfaces, which make it easier to clean. A channel in the guide blocks also makes the slider completely flushable. The guide has a maximum stroke length of 510 mm. Together with the stainless steel motors, motions with an acceleration of up to 440 m/s2 can be achieved.

9stainless steel linear Guides H01

» Made of stainless steel (1.4404 / AISI 316) » Hardened stainless steel guide shafts » Sliding bearing with FDA approval » No seals; connections are welded » Tapered surfaces » Motor inside is completely flushable

The H-37 stainless steel guide will be available starting in December 2015.

The H-48 guide will then follow in the first quarter of 2016.

10 PRODUCT NEWS 2016

P03-37Sx120F-HP linear motor with integrated drive

In the upcoming year of 2016 LinMot will introduce a compact linear motor with an integrated drive. This innovative concept will allow the controller to be eliminated from the electrical enclosure for linear direct drives, thus greatly reducing installation time and effort. On the application side, this opens up the possibility to efficiently couple the devices in a daisy chain linkage. Modular machine concepts can also be implemented simply and easily using the new linear motors with integrated drives.

The motors with integrated drives are available in the 37Sx120 short form factor and can reach a peak force of 255 N. The drive supplies the motor with a peak phase current of up to 25 A and has an industrial Ethernet interface. EtherCAT, ProfiNet, Ethernet IP, Sercos III, and Powerlink are available. Device profiles CoE, CiA402, SoE, and PROFIdrive are also supported. The RS232 configuration interface and the DIP switch are installed behind a protective cover, which guarantees that leak tightness requirements are met. The complete motor with integrated drive thus meets protection class IP 65 to prevent dust and water spray infiltration.

11P03-37sx120F-HP linear motor witH inteGrated drive

» High-performance linear motor with integrated drive

» Compact form factor » Highly dynamic » Suitable for daisy-chain linkages » Integrated mounting flange » Low cabling effort » Low overall costs » Simple commissioning

Stroke up to mm 135

Max. Force N 255

Nominal Force N 35




Stator Length mm 400

Slider Length mm 240

The special P03 series drives will be available starting in fall 2016.


C1400Servo Drive

As part of the ongoing development of the C-series servo drive, LinMot is launching the new C1400 at the end of the year. These flexible controllers are suitable for simple point-to-point movements, as well as to the implementation of complex tasks with axes and NC-synchronization.

With a 240 VAC power stage, this drive has been developed primarily for controlling LinMot‘s own P10-54 linear motors. The C1400 is available with all the leading bus interfaces, such as Profinet, EtherCAT, Sercos III, and Powerlink for communicating with the PLC. Expansion of bus interfaces is supported by a modular bus system in this drive. LinMot also offers PROFIdrive, CoE, and SoE device profiles for the EtherCAT and PROFInet Drives of this series.

Furthermore, the C1400 drives offer up to 100 internally programmable motion profiles and an internal sequencer, which gives the possibility of implementing fast-moving images and sequences, internally. This makes it possible to relieve the higher-level control and apply very time-critical processes without delays and jitter.

13C1400 servo drive

» 1 x 240VAC 15A rms peak phase current » For LinMot P10/AC servomotors » 100 programmable motion profiles » 255 storable motion commands » Interface for incremental or absolute

sensors » RS232 configuration interface

The C1400 servo drive will be available starting in mid-2016.


The requirements on the synchronicity and the flexibility is constantly increasing in the automation sector. Thanks to control systems, which become more powerful, it is possible to coordinate a high number of actuators with complex motion profiles synchronously, in only one axis control.

To simplify the integration of different axes, often standardized device profiles are used.LinMot recognized this trend and therefore the Servo Drives Series C and E are completed with the new device profiles PROFIdrive, Sercos III, SoE (SercosOverEthercat) and CoE (CiA402).By using device profiles, the integration of „foreign“ Drives in the motion control is simplified. Further positive aspects are the automatic data exchange in real time and the increase of determinism in the system.

The Servo Drives of the C and E Series with PROFIdrive, CoE and SoE device profiles are available from December 2015.

easy integration with standardized device profiles

SoE CoE

15

linmot joins the rockwell automation encompass Program

LinMot is now a member of the Rockwell Automation Encompass Program for the regions of Europe and America. As part of the partner network, the program provides a basis for exchanging critical information and links the technical and commercial resources of both partners. The goal is to bring improved solutions to market. The center of the partnership is the products that can be connected to the Rockwell Automation architecture or used with other Rockwell Automation products.

Nearly all LinMot products are characterized by this feature and are therefore listed as reference products by Rockwell Automation.Included in the list are LinMot standard linear motors, 3-phase linear motors, linear-rotary motors, MagSpring® magnetic springs, and series C1250 / E1200 Ethernet IP servo drives.

Customers can therefore find a wide selection of products that can solve their drive tasks.

NTI AG - LinMot & MagSpringHaerdlistrasse 15CH-8957 spreitenbachswitzerland

+41 (0)56 419 91 91+41 (0)56 419 91 92

[email protected]

LinMot USA, Inc.204 e morrissey dr.elkhorn, wi 53121united states

262-743-2555262-723-6688

[email protected]

LinMot Europe LinMot USA

product news 2016 - linmot en · coe, cia402, soe, and profidrive are also supported. the rs232...

Documents