product overview and fields of applicationsouthernpumpservices.co.uk/wilo_drainlift_box.pdfas of:...
TRANSCRIPT
Lift
ing
plan
tsSu
bmer
sibl
e pu
mps
3Subject to change without prior notice
Contents
Wet
Sum
p Pu
mpi
ng S
tatio
ns
Product Overview and Fields of Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4General Notes and Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Submersible pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Lifting plants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Wet Sump Pumping Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
4 As of: 06/2004 - Subject to change without prior notice
Product Overview and Fields of ApplicationDrainage/Sewage Disposal
Submersible Motor Pumps
Product Overview and Fields of ApplicationDrainage/Sewage DisposalSubmersible Motor Pumps
Pump type
Compl.free
passage[mm]
Macerator Floor-
mountedUnder-
floor
Main field of application
Page
Wastewater/Drainage 18
Wilo-Drain TM/TMW 32 10 S C S 21
Wilo-Drain TS 40 10 M/C C M 21
Wilo-Drain TS 50 10 M/C C M 21
Wilo-Drain TS 65 10 M/C C C 21
Wilo-Drain TS 40/12, 40/16 10 M/C C M 21
Wilo-Drain CP 5 to 10 S/M 21
Wilo-Drain LP 40 10 S/M/C C 33
Wilo-Drain TC 40 35 M/C M/C M/C 38
Wilo-Drain TP 50 44 M/C M/C C M/C 38
Wilo-Drain TP 65 44 M/C M/C C C 38
Hot Water 48
Wilo-Opti-Drain TMT/TMC 10 C C C 49
Wilo-Drain VC 5 to 7 S/M/C C M/C 49
Sewage/Faeces 53
Wilo-Drain TP 40 S/25 10 • S/M G 54
Wilo-Drain TP 40 S 10 • S/M C 54
Wilo-Drain STC 80/100 50 to 80 M/C M/C M/C C 63
Wilo-Drain STS 80/100 78 to 95 M/C M/C M/C C 64
Wilo-Drain TP 80 80 M/C M/C M/C C M/C 65
Wilo-Drain TP 100 80 to 95 M/C M/C M/C C M/C 65
Wilo-Drain TP 150 > 100 C C C C C 65
Legend: Fields of application:S: Single/two-family houseM: Multifamily houseC: Commercial• Applicable
Wastewater/drainage Manufacturing sewage
Wastewater/coarse contaminantsCondensate, condensing-boiler/air-conditioning equipment
Sewage/Faeces
5As of: 06/2004 - Subject to change without prior notice
Product Overview and Fields of ApplicationDrainage/Sewage Disposal
Lifting Units
Lifting Units
Pump typeDry-well
instal-lation
Macerator Floor-
mountedUnder-
floor
Main field of application
Page
Condensate/Wastewater/Drainage 108
Wilo-DrainLift Con • S/M/C 109
Wilo-DrainLift TMP • S S 114
Wilo-DrainLift Box • S/M S/M S/M 114
Wilo-DrainLift FH • S/M/C S/M/C C S/M/C 114
Wilo-DrainLift D-FH • S/M/C S/M/C C S/M/C 114
Sewage/Faeces 121
Wilo-DrainLift KH • • S S S 122
Wilo-DrainLift S • S S S S 128
Wilo-DrainLift M • S/M S/M S/M C S/M 128
Wilo-DrainLift L • M/C M/C M/C C M/C 128
Wilo-DrainLift XL • M/C M/C M/C C M/C 128
Wilo-DrainLift XXL • C C C C C 128
Wet Sump Pumping Stations 150
Wilo-DrainLift WS • • S/M/C S/M/C S/M/C C C 150
Wilo-DrainLift WB • • S/M/C S/M/C S/M/C C C 151
Legend: Fields of application:S: Single/two-family houseM: Multifamily houseC: Commercial• Applicable
Wastewater/drainage Manufacturing sewage
Wastewater/coarse contaminantsCondensate, condensing-boiler/air-conditioning equipment
Sewage/Faeces
6 As of: 06/2004 - Subject to change without prior notice
General Notes and Abbreviations
Abbreviations used and what they mean
General Notes and Abbreviations
Abbreviation Meaning
1~ Single-phase alternating current
3~ Three-phase alternating current
Autopilot Automatic adjustment of pump output during setback phases, e.g. boiler setback operation overnight
rbc Resistant to blocking current, no motor protection
DM Three-phase motor
∆p-c Control mode for constant differential pressure
∆p-cv Combined control mode of constant and variable differential pressures
∆p-T Control mode for differential-pressure control as a function of media temperature
∆p-v Control mode for variable differential pressure
∆T Control mode for differential temperature
EM Single-phase AC motor
ECM technologyElectronically commutated motor with new damp-room enclosure. Newly developed glandless drive concept for high-efficiency pumps.
Ext. Off Control input "Overriding Off"
Ext. Min Control input "Overriding Min", e.g. for setback operation without autopilot
RCD Residual-current device
BA Building automation
GTW Special cast iron: white malleable cast iron
°d Degree of German water hardness, unit for assessing water hardness
H Delivery head
IF Interface
Integr. Integrated full motor protection, including triggering electronics
IR Infrared interface
Cataphoresis coating
Paintwork with high adhesive strength for long-lasting corrosion protection
Cap Capacitor
TRS Thermal resistor sensor
KTW Authorization for products with plastics, for use in drinking-water applications
LONLocal operating network(open, non-manufacturer-dependent, standardized databus system in LONWORKS networks)
MOT Motor module (drive motor + impeller + terminal box/electronics module) for exchange in the TOP .. Series
PLR Pump master computer, Wilo-specific data bus
Pt 1000 Platinum temperature sensor with a resistance value of 1,000 Ω at 0 °C
Q (= ) Delivery rate
SBM Process signal or collective run signal
SSM Collective fault signal
V.
Abbreviation Meaning
Control input "0...10 V" Analog input for external activation of functions
TOP-Control Building-automation management with pumps and accessories
TrinkwV 2001 German drinking-water ordinance from 2001(valid from 01.01.2003)
VDI 2035 VDI guideline for preventing damage in hot-water heating installations
WSKThermal winding contacts (in motor for monitoring winding temperature, full motor protection by additional tripping unit)
7As of: 06/2004 - Subject to change without prior notice
General Notes and Abbreviations
WearPumps or parts of pumps are subject to wear in accordance with state-of-the-art technology (DIN 31051/DIN-EN 13306). This wear may vary depending on operating parameters (temperature, pressure, water condition) and the installation/usage situation and may result in the malfunction or failure at different times of the above-mentioned products/components including their electrical/electronic circuitry.
Wear parts are all components subject to rotatory or dynamic strain including electronic components under tension, in particular:
– seals / gaskets (incl. mechanical seals), seal washers– bearings and shafts
– stuffing boxes– capacitors– relays / contactors / switches
– electronic circuits, semiconductor components, etc. – impellers– wearing rings / wearing plates
We do not accept liability for faults or defects arising from natural wear and tear.
WILO – General terms of delivery and serviceThe latest version of our General Terms of Delivery and Service can be found on the Internet at
www.wilo.com or www.wilo.de
8 As of: 06/2004 - Subject to change without prior notice
ContentsSubmersible pumps
Planning Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Submersible PumpsProduct Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Product Advantages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Wastewater/Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Wilo-Drain TM/TMW, TS 40-65, TS 40/12, TS 40/16, CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Pump Equipment/Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Wilo-Drain TM/TMW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Pump Curves, Dimension Drawings, Dimensions, Weights, Accessories . . . . . . . . . . . . . . . . . . . 26Wilo-Drain TS 40, TS 50, TS 65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Pump Curves, Terminal Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Dimension Drawing, Dimensions, Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Wilo-Drain TS 40/12 und 40/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Dimension Drawing, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Wilo-Drain TS... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Mechanical Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Wilo-Drain CP 32, CP 50, CP 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Dimension Drawing, Dimensions, Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Wilo-Drain LP 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Pump Equipment/Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Dimension Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Wilo-Drain TC 40, TP 50/65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Pump Equipment/Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Wilo-Drain TC 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Dimension Drawing, Dimensions, Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Wilo-Drain TP 50, TP 65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Pump Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Terminal Diagram, Dimension Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Dimension Drawing, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Mechanical Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Hot Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Wilo-Drain TMT/TMC, VC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Pump Equipment/Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Wilo-Drain TMT/TMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Dimension Drawing, Dimensions, Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Wilo-Drain VC 32, VC 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Pump Curves, Dimension Drawing, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
9As of: 06/2004 - Subject to change without prior notice
ContentsSubmersible pumps
Subm
ersi
ble
pum
ps
Sewage/Faeces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Wilo-Drain TP 40 S/25, TP 40 S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Pump Equipment/Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Wilo-Drain TP 40 S/25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Dimension Drawing, Dimensions, Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Wilo-Drain TP 40 S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Pump Curves, Terminal Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Dimension Drawing, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Wilo-Drain TP 40 S/25, TP 40 S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Mechanical Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Wilo-Drain STC 80/100, STS 80/100, TP 80-150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Pump Equipment/Function STC 80/100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Pump Equipment/Function STS 80/100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Pump Equipment/Function TP 80-150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Technical Data STC 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Technical Data STC 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Technical Data STS 80/100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Technical Data TP 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Technical Data TP 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Technical Data TP 100, TP 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Wilo-Drain STC 80 /100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Pump Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Dimension Drawings, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Wilo-Drain STS 80 /100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Pump Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Terminal Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Dimension Drawings, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Wilo-Drain TP 80, TP 100, TP 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Pump Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Terminal Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87Dimension Drawings, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Wilo-Drain STC 80/100, STS 80/100, TP 80-150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Mechanical Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Wilo-Drain TP 80, TP 100, TP 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Mechanical Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Electrical Accessories Wilo-Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Pump Equipment/Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Description of Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
10 As of: 06/2004 - Subject to change without prior notice
Sewage DisposalPlanning Guide
Untreated sewage from buildings, as well as rainwater from roofs, courtyards or other catchment areas, that cannot be drained natu-rally by gravity flow by means of the local sewer system must first be lifted to a sufficiently high level by pump stations or lifting plants before the fluid can be discharged into the sewer system. How this sewage is disposed of depends on the type of material handled.Wilo submersible pumps and sewage lifting plants have been specifi-cally designed to meet these differing requirements. Wilo pumps and lifting plants all comply with applicable EN guidelines.Planning and design of wastewater and sewage disposal from build-ings and sites must be carried out in compliance with local drainage regulations and DIN EN 12050/12056, "Wastewater lifting plants for buildings and sites." In this context, a distinction is made between sewage disposal from outlets above the local backflow level, which must be discharged into the public sewage network by natural grav-ity flow, and sewage from outlets whose trap water levels are below the local backflow level. The backflow level is defined as at least the top of the street gutter (kerb edge), but a higher level may be pre-scribed by the local authorities.
Sewage (rain and wastewater) that collects below the backflow level must be discharged into the public sewage network by means of automatic lifting plants – Wilo sewage lifting plants or Wilo sub-mersible pumps.
Specific requirements that must be taken into account in the plan-ning and construction of drainage systems in accordance with DIN 1986-100 EN 12050 regulations include the following:
– Lifting plants must be designed to guarantee a minimum flow velocity of 0.7 m/s with a pressure line of the specified nominal diameter.Prescribed minimum nominal diameters:Wastewater lifting plant - DN 32Sewage lifting plant - DN 80 (without separator/macerator)
– The pressure line of a lifting plant must be equipped with a check valve body and guided so that its lowest point is above the back-flow level. The pressure line must not be connected to wastewater downpipes.
– Wastewater gate valves must be fitted (inlet and discharge ends) in accordance with DIN 1986-100 and EN 12050/EN 12056 regu-lations.
– Vent pipes from the lifting plant must be carried above roof level. The minimum pipe nominal diameter for sewage lifting plants is DN 70.
– Feed lines must be laid with sufficient gradient (at least 1:50).– Pipelines through masonry should be laid flexibly.– An automatic standby pump must be provided if the sewage pipe
cannot cope with interrupted discharge.– Switchboxes and signal components must be installed in a dry and
easily accessible location; alarm components must be clearly visi-ble.
– Lifting plants must be regularly maintained.– Installation rooms must have adequate ventilation and lighting.
A clearance of not less than 600 mm must be provided above and around all control elements of the plant and parts which require maintenance.The lifting plant must firmly anchored to prevent buoyancy.
– Sewage containing petroleum oils or hazardous substances must be disposed of via an oil or petrol trap, sewage containing fats via a grease trap and wastewater containing sand via a sand trap. Sew-age containing acidic substances must first be neutralised.
Calculating the required pump/plant capacity
Flow rate Qp [l/s]:This capacity is the sum of the wastewater inflow Qs and rainwater inflow Qr and must be measured in accordance with EN 12050/EN12056:
Qs = Wastewater rate [l/s] is the sum of sewage from all fixtures with consideration of simultaneity.Qr = Rainwater rate [l/s] is the product of rainwater collected, drain-age factor and the catchment area.
Delivery head Htot [m]:
This is the sum of the difference in height between the lowest col-lector tank level and the lowest point of the discharge pipe loop + the total pipe friction losses Hf [m] in the pressure line.Note: When selecting a lifting plant, note that the pressure differ-ence between the delivery head at nominal flow rate (note minimum flow rate) and the delivery head at null flow rate must be approx. 2-3 m at the operating point for the check valve body to open.
For more information on planning:See the Wilo planning manual on "Sewage Disposal".Sewage DisposalPlanning Guide
11As of: 06/2004 - Subject to change without prior notice
Sewage DisposalPlanning Guide
Subm
ersi
ble
pum
ps
Wastewater lifting plant (sewage without faeces)double pumps - Wilo-Drain Twister
Wilo-Drain Twister double-pump drainage station1 Submersible pump (2x)2 Pressure line DN 32 with
Y-piece3 Check valve body4 Backflow loop5 Backflow level6 Sewer7 Switchgear8 Float switch for level
and alarm monitoring
Backflow loop installationIf possible, the backflow loop should be installed directly above the lifting plant. The sewage pipe leading off the loop should be installed at a gradient to the mains sewer connection.
Wastewater and sewage lifting plant (sewage including faeces) – Wilo-DrainLift XXL double pump unit
1 Gate valve DN 100 or DN 150 2 Single ended flanged nipple with
hose and hose clips DN 100 or DN 150
3 Flexible hose connector for vent line
4 Tank connection kit with pump, 2 gate valves and vent flange with hose
5 Hand diaphragm pump 11/2" 6 Check valve body DN 80 or
DN 100 7 Gate valve DN 80 or DN 100 8 Single ended flanged nipple with hose
and hose clips DN 80 or DN 100 9 3-way stopcock10 Y-pipe DN 80 or DN 10011 Microprocessor-controlled
switchgear12 KAS, mini alarm switchgear with
signal bell13 Flexible hose connector for
Hand-held diaphragm pumps
Backflow level(usually roadtops)
Inlet
Drain pump
Ventilation
12 3
4
5
6
78
9
10
11
12
13
12 As of: 06/2004 - Subject to change without prior notice
Submersible PumpsProduct Overview
Wilo-Drain Submersible Pumps
Wilo-Drain TM/TMW 32 Duty chart (2 -pole, 50 Hz)
• Basement drainage pump• Applications:
Pumping clear or slightly soiled water from tanks, shafts or pits.
Submersible Pumps Wilo-Drain Submersible Pumps Product Overview
Wilo-Drain TS 40, 40-12, 40-16, 50, 65 Duty chart (2-pole, 50 Hz)
• Submersible wastewater pump• Applications:
Pumping wastewater containing solids with a max. diameter of 10 mm from– Building and surface drainage – Environmental protection and sew-
age farm technology– Industrial and process engineering
Wilo-Drain CP Duty chart (2-pole, 50 Hz)
• Submersible wastewater pump • Applications:
Pumping wastewater containing solids with a max. diameter of 10 mm from– Excavation ditches, ponds and shafts– Flooded basements– Use in fountains
Wilo-Drain LP 40 Duty chart (2-pole, 50 Hz)
• Self-priming wastewater pump• Applications:
Pumping wastewater from– Excavation ditches and ponds– Spraying/irrigation of gardens and
lawns– Mobile drainage
Wilo-Drain TMT/TMC Duty chart (2-pole, 50 Hz)
• Wastewater pumps• Applications:
Industrial and municipal use, for example for condensate, hot water and aggressive media
0
2
4
6
H[m
]12108640 2
Wilo-Drain TM/TMW 32
8
10
Q[m3/h]
0
4
8
12
16
20
H[m
]
0 4 8 12
Wilo-DrainTS 40 - TS 65
16 20 24 28 32 36 40 44 48 52
TS 50
TS 65TS 40
Q[m3/h]
0
4
10121416182022
0 4 8 12 16 20 24 28 32 36 40 44 48 52 56
6 8
Wilo-Drain CP 32-80
2
CP 50CP 32 CP 80
Q[m3/h]
H[m
]
0 0 2 4 6 8 10 12
2
4
6
8
10
H[m
]
Wilo-DrainLP 40
Q[m3/h]
Wilo-DrainTMT/TMC
0 0 4 8 12 16
2
4
6
8
10
H[m
]
Q[m3/h]
13As of: 06/2004 - Subject to change without prior notice
Submersible PumpsProduct Advantages
Wilo-Drain Submersible Pumps
Subm
ersi
ble
pum
ps
Wilo-Drain TM/TMW 32
• Self-cleaning pump shaft• Prevents odour build-up from fluids• Easy to install• High level of operating safety• Simple to use
Product Advantages
Wilo-Drain TS 40, 40-12, 40-16, 50, 65
• INOX & Composite• Detachable power cable• Wide range of performance levels
Wilo-Drain CP
• Long working life• High level of operating safety• Can be operated in "slurping" mode (simultaneous air and water intake)• Suitable for continuous operation• Easy to handle
Wilo-Drain LP 40
• High level of operating safety• Sea water-resistant• Easy to handle• Simple to use
Wilo-Drain TMT/TMC
• High resistance to extreme temperatures• Suitable even for aggressive media
14 As of: 06/2004 - Subject to change without prior notice
Submersible PumpsProgram Overview
Wilo-Drain Submersible Pumps
Wilo-Drain VC Duty chart (2-pole, 50 Hz)
• Vertical wastewater pump• Applications:
Pumping wastewater– Containing solids with a maximum
diameter of 5 mm or 7 mm (VC 40)– Substances with temperatures up to
100 °C– from pump sumps– containing condensate– from basements at risk of flooding
Program OverviewWilo-Drain TC 40 Duty chart (2-pole, 50 Hz)
• Submersible wastewater pump • Applications:
Pumping heavily contaminated fluids in– Building and surface drainage – Sewage disposal and conservation– Environmental protection and sew-
age farm technology– Industrial and process engineering
Wilo-Drain TP 50/65 Duty chart (2-pole, 50 Hz)
• Submersible wastewater pump• Applications:
Pumping heavily contaminated fluids in– Building and surface drainage – Sewage disposal and conservation– Environmental protection and sew-
age farm technology– Industrial and process engineering
Wilo-Drain TP 40 S/25 Duty chart (2-pole, 50 Hz)
• Submersible sewage pumpwith macerator
• Applications:Pumping domestic sewage containing faeces from individual fixtures. The patented macerator reduces the solid contents of the sewage flow into a medium containing smaller particles which can be more easily conveyed.
Wilo-Drain TP 40 S Duty chart (2-pole, 50 Hz)
• Submersible sewage pumpwith macerator
• Applications:Pumping domestic sewage containing faeces. The patented macerator reduces the solid contents of sewage flow to a medium containing smaller particles which can be more easily conveyed.
0 0 2 4 6 8 10 12 14
4
2
8
6
10
12
14
16
18
H[m
]
VC 32/10
VC 40/20
Wilo-DrainVC 32-40
Q[m3/h]H
[m]
Q[m3/h]0
0 2 4 6 8 10 12 14
4
8
10
6
2
Wilo-Drain TC 40
TC 40/10TC 40/8
0
4
8
12
16
20
0 4 8 12 16 20 24 28 32 36 40 44 48 52
H[m
]
Wilo-DrainTP 50, TP 65
TP 65
TP 50
Q[m3/h]
Q0 2 4 6 8 100
4
8
12
16
20
H[m
]
Wilo-DrainTP40 S/25
[m3/h]
0 2 4 6 8 10 12 14 160
4
8
12
16
20
24
28
32
H[m
]
Wilo-DrainTP40 S
Q[m3/h]
15As of: 06/2004 - Subject to change without prior notice
Submersible PumpsProduct Advantages
Wilo-Drain Submersible Pumps
Subm
ersi
ble
pum
ps
Wilo-Drain VC
• Built-in motor protection• Extended periods of use• Simple start up procedure• Pump connection outside pumping medium area• Extended standstill periods possible
Product Advantages
Wilo-Drain TC 40
• Simple operation thanks to the built-in float switch• Straightforward installation with built-in mounting foot• Stainless steel mounting foot• Large free ball passage
Wilo-Drain TP 50/65
• INOX & Composite• Detachable power cable• Design variant with explosion protection• Wide range of pump curves
Wilo-Drain TP 40S/25
• Non-clogging• High level of operating safety• Stainless steel motor• Internal cutter allows drawing cutting action• Patented macerator
Wilo-Drain TP 40S
• Non-clogging• Internal cutter allows drawing cutting action• High level of operating safety• Patented macerator
16 As of: 06/2004 - Subject to change without prior notice
Submersible PumpsProduct Overview
Wilo-Drain Submersible Pumps
Wilo-Drain STC 80/100 Duty chart (2/4-pole, 50 Hz)
• Submersible sewage pump • Applications:
Pumping faeces, municipal and indus-trial sewage containing long-fibre par-ticles in the following areas:– Building and surface drainage– Sewage disposal and conservation– Environmental protection and sew-
age farm technology– Industrial and process engineering
Wilo-Drain STS 80/100 Duty chart (4-pole, 50 Hz)
• Submersible sewage pump• Applications:
Pumping faeces, municipal and indus-trial sewage containing long-fibre par-ticles in the following areas:– Building and surface drainage – Sewage disposal and conservation– Environmental protection and sew-
age farm technology– Industrial and process engineering
Wilo-Drain TP 80/100/150 Duty chart (4-pole, 50 Hz)
• Submersible sewage pump• Applications:
Pumping faeces, municipal and indus-trial sewage containing long-fibre par-ticles in the following areas:– Building and surface drainage – Sewage disposal and conservation– Environmental protection and sew-
age farm technology– Industrial and process engineering
Product Overview
Wilo-DrainSTC 80/100
STC 100
STC 80
0 40 80 120 160 200
10
20
30
40
50
60
H[m
] Q[m3/h]
0 50 100 150 2000
5
15
10
20
H[m
]
STS 80
STS 100
Q[m3/h]
Wilo-DrainSTS 80/100
0 50 100 150 200 250 3000
5
15
10
20
25
H[m
]
TP 80
TP 100
TP 150
Q[m3/h]
Wilo-DrainTP80 - TP150
17As of: 06/2004 - Subject to change without prior notice
Submersible PumpsProduct Advantages
Wilo-Drain Submersible Pumps
Subm
ersi
ble
pum
ps
Product Advantages
Wilo-Drain STC 80/100
• Separation chamber with double seal• Wide range of performance levels
Wilo-Drain STS 80/100
• Detachable power cable• Stainless steel motor
Wilo-Drain TP 80/100/150
• INOX & Composite• Explosion protection fitted as standard• Lightweight• Detachable power cable• Cooling jacket fitted as standard• Corrosion-resistant (when used to drain swimming pools, for example)
18 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TM/TMW, TS 40-65, TS 40/12, TS 40/16, CP
Product Description
Wilo-Drain TM/TMWBasement drainage pump
Type keyExample: Wilo-Drain TMW 32/8 HDTM Submersible pump
TMW Submersible pump with turbulator32 Nominal diameter of delivery connection (DN 32)
/8 Max. delivery head (m)HD Suitable for handling abrasive pumping media
Applications
TM 32Pumping clear or slightly soiled water from tanks, shafts or pits with the pump installed vertically.
TMW 32Submersible pumps that are used in pump sumps and exposed to soapy water from washing machines, washbasins and showers (for example) have a considerably shorter working life. The large amount of suspended matter contained in this water gradually accumulates in the pump shaft over time, leaving a slimy residue in the pump sump and in the pump itself.To prevent this, regular sump cleaning is required, a procedure which is both time-consuming and expensive. Furthermore, the problem of sludge disposal and possible hygiene implications cannot be definitely evaluated at this stage. The Wilo-Drain TMW 32 Twister provides an ideal solution in this case.
DesignThis submersible pump is suitable for stationary, fully automatic operation. A sufficiently long hose is connected to the pump dis-charge port for mobile use, while a solid pipe is fitted for stationary use. A fault current safety switch (mandatory for outdoor installa-tions) for a breaking current of 30 mA must be fitted by the cus-tomer, in accordance with EN 60335-2.41.
In addition, for TMW:The design of the Wilo-Drain Twister ensures constant circulation in the pump suction area, thus ensuring that the pump sump is kept clean. Due to the constant turbulence and the fact that this eliminates the suspended matter, odours from the materials handled are not allowed to build up. Maintenance intervals are extended.When you deactivate the twister (see the installation and operating manual), the pump curve is increased by 1 m.
MotorForced-flow casing cooled, stainless steel-cased, dry electric motor with integrated thermal motor protection and automatic restart.
CableA 10 m permanently wired power cable is required for outdoor instal-lations in Germany (VDE), but different regulations may apply in other countries.
Pump/Motor SealsThere is a mechanical seal on the impeller, a shaft seal on the motor and an oil chamber between both seals.
Scope of deliveryA fully assembled pump with cable, plug and fitted float switch is provided, together with installation and operating manual.
Wastewater/DrainageWilo-Drain TM/TMW, TS 40-65, TS 40/12, TS 40/16, CPProduct Description
19As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TM/TMW, TS 40-65, TS 40/12, TS 40/16, CP
Product Description
Subm
ersi
ble
pum
ps
Wilo-Drain TSSubmersible wastewater pump, 2-pole
Type keyExample: Wilo-Drain TS 40 H 90/5.5-1 ATS Submersible wastewater pump40 Connection 40 (= Rp 11/2)
50 (= Rp 2)
65 (= Rp 21/2)H Impeller type: H = semi-open90 Impeller nominal diameter [mm]
/5.5 Performance rating P2 [kW] = value/10 = 0.55 kW-1 1 = alternating current (single-phase) (EM)
Not specified = three-phase current (DM)
A With float switch, power cable and plugNot specified:
Power cable with bare cable end
ApplicationsWilo-Drain TS submersible pumps are ideal for conveying wastewa-ter that contains solid matter with a maximum diameter of 10 mm for:– Building and surface drainage
– Environmental protection and sewage farm technology– Industrial and process engineeringThe pumps may be used in either:
– Stationary wet sump installations– Portable wet sump installations
DesignMonobloc submersible wastewater pump for vertical wet sump installation.– INOX & Composite
– Lightweight– Detachable power cable– Corrosion-proof
MotorThree-phase current asynchronous motor 3~400 V, 50 Hz or AC motor 1~230 V, 50 Hz
Motor protectionAlternating current: Thermal winding contacts (WSK)Three-phase current: Motor protection must be installed on
site from 1.1 kW = Thermal winding contacts
BearingsThe motor shaft is bedded in permanently lubricated, low-mainten-ance roller bearings.
Hydraulic dataSemi-open impeller with a free ball passage of 10 mm. May be installed without base. Fitted with a practical, vertical discharge port.
Scope of delivery
TS 40/12-16 AFully assembled pump with built-in capacitor, 5 m power cable, shockproof plug and attached float switch, hose nozzle, built-in non-return valve, installation and operating manual
TS 40-65Fully assembled pump with 10 m power cable and bare cable end for Three-phase current version 3~400 V, 10 m power cable and switch box (on/off; terminal rail) for AC version 1~230 V, installation and operating manual. TS 40 with built-in non-return valve.
A model:Fully assembled pump with 10 m power cable, plug [CEE/Schuko] and float switch.
TS ... H TS 40/..
20 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TM/TMW, TS 40-65, TS 40/12, TS 40/16, CP
Product Description
Wilo-Drain CPSingle-stage excavation ditch pump
Type keyExample: Wilo-Drain CP 32/17-1~230CP Contractor Pump
32 Nominal diameter (DN 32, DN 50, DN 80)/17 Maximum delivery head [m]
1~230 AC motor3~400 Three-phase motor
ApplicationsDraining of excavation ditches, basements, shafts and ponds. The pump is perfectly suited for use in fountains.
DesignSubmersible pump with double mechanical seal. It is designed to be particularly hard-wearing and robust. The electrical drive is sealed from the flow medium by means of 2 mechanical seals and an inter-nal oil seal chamber. The motor compartment is filled with oil. The hydraulic system is equipped with multi-vane impellers.
Scope of deliveryFully assembled pump with 10 m power cable and alternating current or Three-phase plug, installation and operating manual.
21As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TM/TMW, TS 40-65, TS 40/12, TS 40/16, CP
Pump Equipment/Function
Subm
ersi
ble
pum
ps
• = available, – = not available
Pump Equipment/Function Wilo-Drain TM/TMW 32
Wilo-Drain TS 40
Wilo-Drain TS 50
Wilo-Drain TS 65
Wilo-Drain TS 40/12/16
Wilo-Drain CP 32/50/80
Operating mode S3 (intermittent service)
Frequency switching/h [%] 25 25 25 25 25 –
Max. frequency switching/h 60 70 50 40 50 –
Recommended frequency switching/h 20 20 20 20 20 –
Operating mode S1 (continuous service)
Motor below water • • • • • •
Motor above water – – – – – •
Pump/motor seals
In pumping medium area: Mechanical seal • • • • • •
On the motor compartment side: Mechanical seal – – – – – •
Shaft seal • • • • • –
Oil seal chamber • • • • • •
Design
Wet sump installation Stationary • • • • • •
Portable • • • • • •
Submersible • • • • • •
Open multi-vane impeller • • • • – –
Closed multi-vane impeller – – – – – •
Free-flow impeller – – – – • •
(CP 32/23 and CP 80 only)
Turbulator •(TMW only) – – – – –
Materials
Motor Cast aluminium – – – – – •
Stainless steel • • • • • –
Pump Plastic • • • • • –
Cast iron – – – – – •
Equipment
Motor monitor (temperature) • •
(3~400 V model only)
•(3~400 V
model only)• – •
Explosion protection – – •
(3~400 V model only)
• – –
Forced-flow casing cooling • – – – – • (CP 80 only)
Pre-assembled • – – – • –
Power cable [m] 3
10 for: TM 32/8 and TMW 32/11HD
10 10 10 5 10
Detachable power cable – • • • – •
Attached float switch –/• optional optional – • –
Built-in check valve body – • – – • –
Capacitor box for 1~230 V – • • • – •(CP 32/17only)
Hose connection – – – – • –
22 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TM/TMW, TS 40-65, TS 40/12, TS 40/16, CP
Technical Data
Wilo-Drain TM/TMW Wilo-Drain TS
Technical Data
TM 3
2/8
TMW
32/
8
TMW
32/
11
TMW
32/
11 H
D
TS 4
0...
H 9
0/5.
5
TS 4
0...
H 1
00/7
.5
TS 5
0...
H 1
11/1
1
TS 5
0...
H 1
22/1
5
TS 5
0...
H 1
33/2
2
TS 6
5...
H 1
17/2
2
Approved fluidsWashing machine soap and water mixture (without long-fibre particles) • •
Water from car wash facilities • •
Non-chlorinated pool water • •
Water from firefighting systems • •
Heating water (Tmax = 35 °C) • •
Boiler feed water • •
Condensate – • •
Cooling (condenser) water • •
Clean water • •
Untreated wastewater • –
Drainage water • •
Partially desalinated water – • –
Rainwater • • •
Swimming pool water – • –
Sea water – • –
Wastewater • • •
Aggressive media – • –
PerformancePower consumption P1 1~230 V [kW] 0.5 0.45 0.75 0.75 1.0 1.3 1.5 – – –
Power consumption P1 3~400 V [kW] – – – – 1.0 1.1 1.5 2.0 2.9 2.9
Rated motor power P2 [kW] 0.37 0.37 0.55 0.55 0.55 0.75 1.1 1.5 2.2 2.2
Rated current for 1~230 V [A] 2.2 2.1 3.6 3.6 4.0 5.5 7.7 – – –
Rated current for 3~400 V [A] – – – – 2.0 2.0 3.2 3.6 5.1 5.1
Speed [rpm] 2,900 2,900
MotorProtection class for max. submersion depth IP 68 IP 68
Insulation class F F
Frequency switching [per hour] 60 70 50 40
PumpMax. noise level at min. level [dBA] 52 55 54 54 –
Submersion depth, max. [m] 3 10
Fluid temperature [°C] 3 – 35 3 - 35
Fluid temperature, short periods up to 3 min [°C] 90 –
Cable type H07 RN-F H05 RN-F H07
RN-F OZOFLEX (PLUS) H07 RN-F - Oil-resistant
Cable length [m] 10 3 3 10 10 10 10 10 10 10
Cable cross-section 1~230 V [mm2] 1 1 1 1 1 1 1 – – –
Cable cross-section 3~400 V [mm2] – – – – 1 1 1 1.5 1.5 1.5
Plug Schuko Schuko/CE – – –
Type of power cable Fixed Plug (detachable)
Activation type direct direct
Explosion protection (EEx d II B T4) – – – – – –
Three-phase
currentonly
• • •
Free ball passage [mm] 10 10 10 10 10 10 10 10 10 10
23As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TM/TMW, TS 40-65, TS 40/12, TS 40/16, CP
Technical Data
Subm
ersi
ble
pum
ps
• = available or authorised, – = not available or not authorised
Note on Wilo-Drain TS:Models
TS 40... H 90/5.5TS 40... H 100/7.5TS 50... H 111/11also supplied as A model (without explosion protection, but including float switch and plug 1~230 V).
Dimensions
Discharge port [DN/Rp] 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 2 2 2 2 1/2
Hose connection [mm] 35 – – – – – – – – –
Weight [kg] 5.2 4.7 6.2 6.2 13.5 14.5 21 22 23 24
MaterialsPump housing PP-GF30 Polypropylene Polyurethane
Impeller PP-GF30 Polypropylene
Shaft 1.4021 C10/1.4404
Shaft seal on motor side NBR NBR
Motor housing 1.4301 1.4404 1.4301
Wilo-Drain TM/TMW Wilo-Drain TS
Technical Data
TM 3
2/8
TMW
32/
8
TMW
32/
11
TMW
32/
11 H
D
TS 4
0...
H 9
0/5.
5
TS 4
0...
H 1
00/7
.5
TS 5
0...
H 1
11/1
1
TS 5
0...
H 1
22/1
5
TS 5
0...
H 1
33/2
2
TS 6
5...
H 1
17/2
2
24 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TM/TMW, TS 40-65, TS 40/12, TS 40/16, CP
Technical Data
Wilo-Drain TS... Wilo Drain CP ...
TS 4
0/12
-A
TS 4
0/16
-A
32/1
7-1
~230
32/1
7-3
~400
32/2
3-1
~230
32/2
3-3
~400
50/1
2-1
~230
50/1
2-3
~400
50/1
6-3
~400
80/2
0-3
~400
Approved fluidsWashing machine soap and water mixture (without long-fibre particles) • • • • • • •
Water from car wash facilities • • • • • • •
Non-chlorinated pool water • • • • • • •
Heating water • • • • • • •
Condensate Condition-ally resist.
Condition-ally resist.
Condition-ally resist.
Condition-ally resist.
Condition-ally resist.
Condition-ally resist.
Condition-ally resist.
Cooling (condenser) water Condition-ally resist.
Condition-ally resist.
Condition-ally resist.
Condition-ally resist.
Condition-ally resist.
Condition-ally resist.
Condition-ally resist.
Clean water • • • • • • •
Drainage water • • • • • • •
Partially desalinated water Condition-ally resist.
Condition-ally resist. – – – – –
Rainwater • • • • • • •
Swimming pool water Condition-ally resist.
Condition-ally resist. – – – – –
Sea water Condition-ally resist.
Condition-ally resist. – – – – –
Wastewater, flood and river water • • • • • • •
Highly dilute alkalines Condition-ally resist.
Condition-ally resist. – – – – –
Media with low aggressiveness Condition-ally resist.
Condition-ally resist. – – – – –
PerformancePower consumption P1 1~230 V [kW] 0.5 0.9 1.2 1.2 1.2 – –
Power consumption P1 3~400 V [kW] – – 1.2 1.2 1.2 2.0 2.9
Rated motor power P2 [kW] 0.4 0.75 0.75 0.75 0.75 1.3 2.36
Rated current for 1~230 V [A] 2.6 4.6 5.3 5.3 5.3 – –
Rated current for 3~400 V [A] – – 2.1 2.1 2.1 3.35 4.7
Speed [rpm] 2,900 2,900 2,900 2,900 2,900 2,900 2,900
MotorProtection class for max. submersion depth IP 68 IP 68 IP 68 IP 68 IP 68 IP 68
Insulation class B F F F F F
Frequency switching [per hour] 20 15 15 15 15 15
Pump
Max. noise level at min. level [dBA] 70 70 70 70 70 70 70
Submersion depth, max. [m] 5 12 12 12 12 12
Fluid temperature, max. [°C] 35 40 40 40 40 40
Cable type H07 RN-F
Cable length [m] 5 10 10 10 10 10
Cable cross-section 1~230 V [mm2] 1 1 4G1.5
Cable cross-section 3~400 V [mm2] – – 4G1.5
Type of power cable detachable/plug
Activation type direct
Explosion protection –
Internal mechanical seal SiC/SiC SiC/SiC Steatite/carbon
Steatite/carbon
Steatite/carbon
Steatite/carbon
Carbon/Aluminium
Oxide
External mechanical seal SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC
Free ball passage [mm] 10 10 9 5 10 10 5
25As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TM/TMW, TS 40-65, TS 40/12, TS 40/16, CP
Technical Data
Subm
ersi
ble
pum
ps
• = available or authorised, – = not available or not authorised
Dimensions
Discharge port DN R11/2 R11/2 G11/4 G11/4 G2 G2 G3
Weight [kg] 13 14 14.5 14.5 15.5 18.5 29.0
MaterialsPump housing PP–GF30 EN-GJL-250
Impeller PP–GF30 EN-GJL-250
Shaft 1.4404/1.0402 1.4021
Static seals NBR NBR
Motor housing 1.4404 Aluminium
Wilo-Drain TS... Wilo Drain CP ...
TS 4
0/12
-A
TS 4
0/16
-A
32/1
7-1
~230
32/1
7-3
~400
32/2
3-1
~230
32/2
3-3
~400
50/1
2-1
~230
50/1
2-3
~400
50/1
6-3
~400
80/2
0-3
~400
26 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TM/TMW
Pump Curves, Dimension Drawings, Dimensions, Weights, Accessories
Dimensions, weights
TM/TMW 32Wilo-Drain TM/TMW Pump Curves, Dimension Drawings, Dimensions, Weights, Accessories
2-pole, 50 Hz
1 = TMW 32/8
2 = TM 32/8
3 = TMW 32/11
Dimension drawings Installation schematics for installations with switchgears
Dis-charge
port
Hoseconnection
Height of the
connection
Pump diameter
Shaft dimensions,
min.
Switch-on level
± 8 mm
Switch-off level
± 8 mm
Emptyinglevel,min.
Weight
– L D H x B – h1 – –
Rp [mm] [kg]
TM 32/8 – 35 294 165 – – – 14 5.2
TMW 32/8 1 1/4 – 293 165 280x350 250 102 30 4.7
TMW 32/11 1 1/4 – 323 165 330x350 280 102 30 6.2
TMW 32/11 HD 1 1/4 – 323 165 330x350 280 102 30 6.2
Accessories
Check valve body Rp 1 1/4with drain plug, plastic, nominal pressure PN 4 bar
10
8
6
4
2
00 2 4 6 8 10 12 14
Wilo-Drain TMW 32
1
2
3
H
Q
[m]
[m3/h]
D
1 ~ 230V 50 Hz
L
Bmin
Hm
in
h 1
h
Alarmon
Off
On
Peak load
Base load andalarm
Off
adju
stab
le
x x 1000 500350 350
27As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TS 40, TS 50, TS 65
Pump Curves, Terminal Diagram
Subm
ersi
ble
pum
ps
TSWilo-Drain TS 40, TS 50, TS 65 Pump Curves, Terminal Diagram
2-pole, 50 Hz
1 = TS 40 H 90/5.5
2 = TS 40 H 100/7.5
3 = TS 50 H 111/11
4 = TS 50 H 122/15
5 = TS 50 H 133/22
6 = TS 65 H 117/22
Pump curves for TS 40 without non-return valve
All pump curves shown are based on a density of ρ = 1 kg/dm3
Terminal diagram
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 4 8 12 16 20 24 28 32 36 40 44 48 52 [m3/h]
24
20
16
12
8
4
0
[l/s]
Wilo-Drain TS
H
Q
6
5
43
21
[m]
L1 N PE -
L1 N PE
1 ~ 230 V, 50 Hz
Floatswitch
WA
L1 L2 L3
3 ~ 400 V, 50 Hz
> 1,1 kW
To switch rotational direction,switch any two phases
L WSK WSK1 L2 L3
3 ~ 400 V , 50 Hz
To switch rotational direction,switch any two phases
≤ 1,1 kW
PEgreen/yellow
PEgreen/yellow
28 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TS 40, TS 50, TS 65
Dimension Drawing, Dimensions, Weights
Dimensions, weights
Dimension drawingDimension Drawing, Dimensions, Weights
Discharge port
Dimensions Weight
– L1 L2 L6 D H D1 D2 –
Rp [mm] [kg]
TS 40 H 90/5.5 DM/A 1 1/2 341 412 127 112.4 124 275 220 13.5
TS 40 H 90/5.5 EM/A 1 1/2 341 412 127 112.4 124 275 220 13.5
TS 40 H 100/7.5 DM/A 1 1/2 341 412 127 112.4 124 275 220 14.5
TS 40 H 100/7.5 EM/A 1 1/2 341 412 127 112.4 124 275 220 14.5
TS 50 H 111/11 DM/A 2 360 440 170 128 132 375 294 21
TS 50 H 111/11 EM/A 2 360 440 170 128 132 375 294 21
TS 50 H 122/15 DM 2 360 440 170 128 132 375 294 22
TS 50 H 133/22 DM 2 387 472 170 138 132 375 294 23
TS 65 H 117/22 DM 2 1/2 398 483 170 138 149 375 294 24
Ø D 2
D 1
H
L1
L2
Rp
Ø D
L6
PG 11
PG 16-21
PG 11 PG 13
PG 13
225
110
10 m
Three-phase currentAC12
0150
AC
Model withbare cable end
80 80
120
80
15010 m
1m
Model with flat switchand connector (-A)
29As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TS 40/12 and 40/16
Pump Curves, Dimension Drawing, Dimensions
Subm
ersi
ble
pum
ps
Dimensions
TS 40/12 and TS 40/16Wilo-Drain TS 40/12 and 40/16 Pump Curves, Dimension Drawing, Dimensions
2-pole, 50 Hz
Dimension drawing
Dimensions
A B C D
[mm]
TS 40/12-A 390 273 245 DN 40/ R1 1/2
TS 40/16-A 407 290 245 DN 40/ R1 1/2
4
0
TS 40/16-A
TS 40/12-A8
12
16
Wilo-Drain TS 40
H
[m]
Q
[m3/h]0 4 8 12 16
D
C
B
A
30 m
m
30 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TS...
Mechanical Accessories
Stationary wet sump installation Wilo-Drain TS...Mechanical Accessories
Check valve body (Item 2)TS 40 comes standard with built-in non-return valve.TS 40 TS 50 TS 65Rp 1 1/2 Rp 2 Rp 2 1/2all female thread, cast iron (EN-GJL)
Gate valve (ball valve; Item 3)TS 40 TS 50 TS 65Rp 1 1/2 Rp 2 Rp 2 1/2Female thread, brass, nickel-plated
Portable wet sump installationHose connection, incl. Hose clamp (Item 12)TS 40 TS 50 TS 65R 1 1/2 R 2 Rp 2 1/2Plastic Plastic Stainless steela 40 mm 60 mm 70 mmb 80 mm 90 mm 100 mmall male thread
Geka solid coupling (Item 19)BrassTS 40: R 1 1/2 male thread
Geka hose coupling (Item 20)Brass, fits Geka solid coupling, incl. hose clipTS 40: for hose inner diameter of 40 mm
Storz fixed coupling (Item 13)Aluminium, 52-CTS 50 TS 65G 2 G 2 1/2Male thread, cam distance 66 mm
Storz hose coupling (Item 14)Aluminium, 52-C, incl. hose clipTS 50 = distance between cams 66 mm, for hose inside diameter 52 mm
3
2
14 or 20
12, 13 or 19
a
b
31As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain CP 32, CP 50, CP 80
Pump Curves, Dimension Drawings, Dimensions, Weights
Subm
ersi
ble
pum
psDimensions, weights
CPWilo-Drain CP 32, CP 50, CP 80 Pump Curves, Dimension Drawings, Dimensions, Weights
2-pole, 50 Hz1 = CP 32/23
2 = CP 32/17
3 = CP 50/12
4 = CP 50/16
5 = CP 80/20
Dimension drawings
Discharge port Dimensions Weight
– B1 H H1 D a B a1 –
DN [mm] [kg]
Wilo Drain CP 32/17 - 23 G 1 1/4 216 387 122 163 118 230 – 14.5
Wilo Drain CP 50/12 G2 227 380 – – 90 195 90 15.5
Wilo Drain CP 50/16 G2 228 415 – – 90 195 90 18.5
Wilo Drain CP 80/20 G2 – 415 438 236 140 304 – 29.0
Wilo-Drain CP24
22
20
18
16
14
12
10
8
6
4
2
00 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60
Q
H
[m]
5
4
3
21
[m3/h]
H
H1 D
DN
B1
a
B
CP 32
58
B1
a1
DN
a
B
H
CP 50
D
a
B
H1
H
D
DN
CP 80
32 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain LP 40
Product Description
Wilo-Drain LPSelf-priming wastewater pump
Type keyExample: Wilo-Drain LP 40/10LP Lifting Pump
40 Nominal diameter (DN 40)/10 Max. delivery head [m]
ApplicationsThe Wilo-Drain LP 40 self-priming wastewater pump is suitable for conveying large quantities of clean or slightly soiled water. It is used for in gardening and agriculture, as well as in industry.Because it is resistant to salt water, it can also be used in navigation (bronze model).
DesignPortable self-priming centrifugal pump, mounted on vibration-free polypropylene baseplate for stability.Maximum suction height 6 m.
Scope of deliveryPump includes oval mating flange with female thread Rp 1 1/2 , carry-ing handle and installation and operating manual.
Wilo-Drain LP 40Product Description
33As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain LP 40
Pump Equipment/Function
Subm
ersi
ble
pum
ps
• = available, – = not available
Pump Equipment/Function Wilo-Drain LP 40
Operating mode S1 (continuous service)
Motor air-cooled •
Pump/motor seals
In pumping medium area: Mechanical seal •
Design
Dry sump installation Stationary •
Mobile •
Free-flow impeller •
Materials
Motor Cast aluminium •
Pump PP–GF30 •
Bronze •
Equipment
Motor monitor (temperature) •
Oval mating flanges •
34 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain LP 40
Technical Data
• = available or authorised, – = not available or not authorised
Technical DataWilo Drain LP 40
Approved fluids
Washing machine soap and water mixture (without long-fibre particles) •
Water from car wash facilities •
Non-chlorinated pool water •
Salt water •
Heating water •
Cooling (condenser) water •
Clean water •
Drainage water •
Rainwater •
Wastewater, flood and river water •
Highly dilute alkalines •
Performance
Power consumption P1 1~230 V [kW] 0.55
Rated motor power P2 [kW] 0.4
Rated current for 1~230 V [A] 2.3
Speed [rpm] 2,900
Motor
Protection class IP 44
Insulation class B
Pump
Fluid temperature [°C] 3 - 35
Mechanical seal Carbon/ceramic
Free ball passage [mm] 5
Dimensions
Discharge port DN 40
Hose connection diameter [mm] 40
Weight [kg] 12
Materials
Pump housing Polypropylene
Impeller Bronze
Shaft 1.4006/1.0402
Static seals NBR
Motor housing Aluminium
35As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain LP 40
Pump Curves, Dimension Drawing
Subm
ersi
ble
pum
ps
LP 40Pump Curves, Dimension Drawing
2-pole, 50 Hz
Dimension drawing
Terminal diagram
1~230 V, 50 Hz
2
8
4
0
H
10
6
0 2 4 6 8 10
Wilo-DrainLP 40/10
Q
[m]
[m3/h]
L N PE
36 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TC 40, TP 50/65
Product Description
Wilo-Drain TC 40Submersible wastewater pump, 2-pole
Type keyExample: Wilo-Drain TC 40/8TC Submersible pump
40 Nominal diameter [mm]/8 Max. delivery head [m]
ApplicationsWilo-Drain TC 40 submersible pumps are ideal for pumping heavily contaminated fluids for:– Building and surface drainage
– Sewage disposal and conservation– Environmental protection and sewage farm technology– Industrial and process engineering
DesignMonobloc submersible wastewater pump for vertical wet sump installation.
MotorAC motor 1~230 V, 50 Hz
Motor ProtectionThermal winding contacts (WSK)
Scope of deliveryFully assembled pump with 5 m power cable, plug (Schuko), float switch and installation and operating manual.
Wilo-Drain TC 40, TP 50/65Product Description
37As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TC 40, TP 50/65
Product Description
Subm
ersi
ble
pum
ps
Wilo-Drain TP 50, TP 65Submersible wastewater pump
Type keyExample: Wilo-Drain TP 65 E 114/11-1ATP Submersible pump
65 Nominal diameter [mm]E Impeller type: E = Single-vane impeller
F = Free-flow impeller114 Impeller nominal diameter [mm]/11 Performance rating P2 [kW] = value/10 = 1.1 kW
-1 1 = alternating current (single-phase) (EM)Not specified = three-phase current (DM)
A With float switch and plug
ApplicationsWilo-Drain TP submersible pumps are ideal for pumping heavily con-taminated fluids for:– Building and surface drainage– Environmental protection and sewage farm technology– Industrial and process engineering
High operational reliability due to a free ball passage of 44 mm. Because of its low weight, ideally suited as an emergency/replace-ment pump.
Suitable for: – Stationary wet sump installation– Portable
DesignMonobloc submersible wastewater pump for vertical wet sump installation.– Inox & Composite– Low weight– Detachable power cable– Corrosion-proof
MotorThree-phase current asynchronous motor 3~400 V, 50 Hz or AC motor 1~230 V, 50 Hz
Motor protectionAlternating current: Thermal winding contacts (WSK)Three-phase: Motor protection must be installed on site
From 1.1 kW = thermal winding contacts(WSK)
BearingsThe motor shaft is bedded in permanently lubricated, low-mainten-ance roller bearings.
Shaft sealBidirectional mechanical seal and shaft seal. Intermediate oil cham-ber for cooling and lubrication.
Hydraulic dataOptionally with single-vane or free-flow impeller with a free ball passage of 44 mm.
Scope of deliveryFully assembled pump with 10 m power cable and bare cable end for three-phase current version 3~400 V, 10 m power cable and switch box (on/off; terminal rail) for AC version 1~230 V, and installation and operating manual.
A-version:Fully assembled pump with 10 m power cable, plug [CEE/Schuko], float switch and installation and operating manual.
38 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TC 40, TP 50/65
Pump Equipment/Function
• = available, – = not available
Pump Equipment/Function Wilo-Drain TC 40 Wilo-Drain TP 50 Wilo-Drain TP 65
Operating mode: Intermittent service S3
Frequency switching/h [%] 25 25 25
Max. frequency switching/h 30 70 40
Recommended frequency switching/h 20 20 20
Operating mode: Continuous service S1
Motor below water • • •
Pump/motor seals
In pumping medium area: Mechanical seal • • •
On the motor compartment side: Shaft seal • • •
Oil seal chamber • • •
Design
Wet sump installation Stationary • • •
Portable • • •
Submersible • • •
Open single-vane impeller – • •
Free-flow impeller • • •
Materials
Motor Stainless steel • • •
Pump Plastic – • •
Cast iron • – –
Equipment
Motor monitor (temperature) – •(1~230 V model only) •
Explosion protection – – •(3~400 V model only)
Pre-assembled • •(A model only)
•(A model only)
Power cable [m] 5 10 10
Attached float switch • •(A model only) –
Capacitor box – •(A model only) –
39As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TC 40, TP 50/65
Technical Data
Subm
ersi
ble
pum
ps
Wilo Drain TC ...
Wilo-DrainTP ...
Wilo-DrainTP ...
Technical Data
TC 4
0/8
TC 4
0/10
TP 5
0 ...
E 10
1/5.
5
TP 5
0 ...
E 10
7/7.
5
TP 5
0 ...
F 8
2/5.
5
TP 5
0 ...
F 9
0/7.
5
TP 6
5 ...
E 11
4/11
TP 6
5 ...
E 12
2/15
TP 6
5 ...
E 13
2/22
TP 6
5 ...
F 91
/11
TP 6
5 ...
F 98
/15
TP 6
5 ...
F 10
9/22
Approved fluids
Washing machine soap and water mixture (without long-fibre particles) • • •
Water from car wash facilities – • •
Pool water • • •
Water from firefighting systems • • •
Heating water Tmax < 40 °C Tmax < 35 °C
Boiler feed water Tmax < 40 °C Tmax < 40 °C
Condensate – • •
Cooling (condenser) water • • •
Drainage water • • •
Rainwater • • •
Wastewater, flood and river water • • •
Faeces (free-flow impeller) – – •
Performance
Power consumption P1 1~230 V [kW] 0.66 0.94 1.0 1.3 1.0 1.3 1.5 – – 1.5 – –
Power consumption P1 3~400 V [kW] – – 1.0 1.1 1.0 1.1 1.5 2.0 2.9 1.5 1.8 2.7
Rated motor power P2 [kW] 0.5 0.6 0.55 0.75 0.55 0.75 1.1 1.5 2.2 1.1 1.5 2.2
Rated current for 1~230 V [A] 3.2 4.4 4.0 5.5 4.0 5.5 7.2 – – 6.9 – –
Rated current for 3~400 V [A] – – 2.0 2.0 2.0 2.0 3.2 3.8 5.2 3.2 3.6 5.1
Speed [rpm] 2,850
Motor
Protection class for max. submersion depth IP 68
Insulation class F
Frequency switching [per hour] 30 70 40
Pump
Submersion depth, max. [m] 5 10 10
Fluid temperature, max. [°C] 40 35 35
Cable type H07 RN-F OZOFLEX (PLUS) H07 RN-F – oil-resistant
Cable length [m] 5 10 10
Cable cross-section 1~230 V [mm2] 3x1 4x1 4x1 – – 4x1 – –
Cable cross-section 3~400 V [mm2] – 4x1 6x1 6x1 6x 1.5 6x1 6x1 6x 1.5
Plug Schuko Schuko/CE –
Type of power cable longitudinal watertight longitudinal watertight/plug longitudinal watertight/plug
Activation type direct direct direct
Explosion protection – – EEx d ll B T4 (except 1~230 V and A models)
Free ball passage [mm] 35 44 44
Dimensions
Discharge port [DN/Rp] 1 1/2 1 1/2 50 50 50 50 65 65 65 65 65 65
Weight [kg] 9.5 12 14.5 16 14.5 16 21 22 24.5 22 24.5 24.5
40 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TC 40, TP 50/65
Technical Data
• = available or authorised, – = not available or not authorised
Materials
Pump housing EN-GJL-200 Polypropylene Polyurethane
Impeller Plastic Polypropylene Polyurethane Polypropylene
Shaft 1.4005 1.4435 1.4435
Pump side: Mechanical seal(bidirectional)
Carbon/ceramic SiC-SiC SiC-SiC
Motor side: Mechanical seal Carbon/ceramic – –
Shaft seal – NBR NBR
Static seals NBR NBR NBR
Motor housing 1.4308 1.4301(1.4435 steel upon request)
1.4301(1.4435 steel upon request)
Wilo Drain TC ...
Wilo-DrainTP ...
Wilo-DrainTP ...
Technical Data
TC 4
0/8
TC 4
0/10
TP 5
0 ...
E 10
1/5.
5
TP 5
0 ...
E 10
7/7.
5
TP 5
0 ...
F 8
2/5.
5
TP 5
0 ...
F 9
0/7.
5
TP 6
5 ...
E 11
4/11
TP 6
5 ...
E 12
2/15
TP 6
5 ...
E 13
2/22
TP 6
5 ...
F 91
/11
TP 6
5 ...
F 98
/15
TP 6
5 ...
F 10
9/22
41As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TC 40
Pump Curves, Dimension Drawing, Dimensions, Weights
Subm
ersi
ble
pum
ps
Dimensions, weights
TC 40Wilo-Drain TC 40Pump Curves, Dimension Drawing, Dimensions, Weights
2-pole, 50 Hz
1 = TC 40/8
2 = TC 40/10
Dimension drawing
Discharge port Dimensions Weight
– A B C H H1 –
Rp [mm] [kg]
Wilo Drain TC 40/8 1 1/2 105 86 138 352 120 9.5
Wilo Drain TC 40/10 1 1/2 105 86 138 367 120 12.0
[m3/h]0 2 4 6 8 10 12 14 16
H
0
4
8
10
12
6
2
Wilo-Drain TC 40
Q
1
2
[m]
H
50
H1
B C
A
5 m
DN
42 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TP 50, TP 65
Pump Curves
TP 50 E
2-pole, 50 Hz
1 = TP 50 E 101/5.5 2 = TP 50 E 107/7.5
All pump curves shown are based on a density of ρ = 1 kg/dm3
Wilo-Drain TP 50, TP 65 Pump Curves
TP 50 F
2-pole, 50 Hz
3 = TP 50 F 82/5.5 4 = TP 50 F 90/7.5
All pump curves shown are based on a density of ρ = 1 kg/dm3
Q
H
00
0
4
2
1
2412 16
4
6
8
10
8 20
12
14
28 32
2 3 4 65 7 8 9
16
36
Wilo-DrainTP 50 E
10
1 2
[m]
[m3/h]
[l/s]
Wilo-DrainTP 50 F
Q
H
00
0 [l/s]
4
2
1
24128 16
4
6
8
10
20
12
28 32
2 3 4 5 6 7 8 9
3 4
[m]
[m3/h]
43As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TP 50, TP 65
Pump Curves
Subm
ersi
ble
pum
ps
TP 65 E
2-pole, 50 Hz
1 = TP 65 E 114/112 = TP 65 E 122/153 = TP 65 E 132/22
TP 65 F
2-pole, 50 Hz
4 = TP 65 F 91/115 = TP 65 F 98/156 = TP 65 F 109/22
[l/s]
2
1
0 8 24 32 40 48 5616
20
16
12
8
4
0
16 564840322480
Q
0 5 10 15
Wilo-DrainTP 65 E
H
1 2 3
3
2
1
[m]
Q [m3/h]
[m3/h]
P 2[kW
]
[l/s]
0 8 16 24 32 40 48
14
12
10
8
6
4
2
0484032241680
2
1
0
Wilo-DrainTP 65 F
Q
Q
0 15105
H
4
4 56
6
5
[m]
P 2[k
W]
[m3/h]
[m3/h]
44 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TP 50, TP 65
Terminal Diagram, Dimension Drawings
Dimension drawing TP 50
Terminal diagramTerminal Diagram, Dimension Drawings
L1 N PE -
L1 N PE
1 ~ 230 V, 50 Hz
Floatswitch
WA
L1 L2 L3
3 ~ 400 V, 50 Hz
> 1,1 kW
To switch rotational direction,switch any two phases
L WSK WSK1 L2 L3
3 ~ 400 V , 50 Hz
To switch rotational direction,switch any two phases
≤ 1,1 kW
PEgreen/yellow
PEgreen/yellow
60
190130
300
15
173
242
600
Ø 125
Ø 246
481
411
Ø 112, 4
DN:50
98
150
4 x M16
Model with float switch and connectcor (-A)
PG 11
PG 16-21
PG 11 PG 13
PG 13
255
110
10 m
Three-phase currentAC AC
Model with barecable end
80
120
150 80
PN 10/16
120
80
15010 m
1m
45As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TP 50, TP 65
Dimension Drawings, Dimensions
Subm
ersi
ble
pum
ps
Dimensions
Dimension drawing TP 65Dimension Drawings, Dimensions
Dimensions
L1 L2 L3 L4 D
[mm]
TP 65 E 114/11 DM/A 425 505 – – 128
TP 65 E 114/11 EM/A 425 505 150 120 128
TP 65 E 122/15 DM 425 505 – – 128
TP 65 E 132/22 DM 452 535 200 150 138
TP 65 F 91/11 DM/A 425 505 – – 128
TP 65 F 91/11 EM/A 425 505 150 120 128
TP 65 F 98/15 EM 452 535 200 150 138
TP 65 F 109/22 DM 452 535 – – 138
60
210130
360
15
173
280
600
Ø 145
L1
Ø D
115
L2
170DN 65
Ø 300
4 x M16
Model with flat switchand connector (-A)
L4
L3
PG 11
PG 16-21
PG 11 PG 13
PG 13
225
110
10 m
Three-phase current AC
L4
L3
AC
Model withbare cable end
80 8080
PN 10/16
10 m
1 m
46 As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TP 50, TP 65
Mechanical Accessories
Stationary wet sump installation TP 50 and 65 Mechanical Accessories
Base elbow incl. cable guide (Item 1)Made of cast iron 25 (EN-GJL-250), including pump support, profile seal, accessories for installation and fastening to the ground, and guide pipe bracket. Complete 7 m cable guide for 3.5 m installation depth. For connection DN 50 or DN 65. Alternatively, on-site installation with 1" guide pipe possible (scope of delivery including chain, Item 6).
TP 50 TP 65A 150 180 B 300 360 C 150 200 D 242 280
Chain (Item 6)Made of galvanised steel, including stainless steel shackles, length: 5m, lifting capacity: 250 kg (included in scope of delivery of Item 1)
Check valve body (Item 2a)Rp 2-female thread, cast iron 25 (EN-GJL-250)For TP 50 only
Check valve body (Item 2)DN 50, cast iron 25 (EN-GJL-250), flanges PN 10/16, with unrestricted passage, cleaning port and ventilation device including installation acces-sories, draw. No. 53.4-309
TP 50 TP 65E 203 223 F 200 240
Gate valve (Item 3a)Rp 2 female thread, brass, nickel-platedFor TP 50 only
Gate valve (Item 3)DN 50, cast iron 25, (EN-GJL-250) flanges PN 10/16, incl. installation accessories
TP 50 TP 65G 235 295 H 150 170
Y-pieceMade of galvanised steel 37, with 2 sets of installa-tion accessories, flanges PN 10/16, DIN 2501, DN 50/50/50 or 65/65/65
TP 50 TP 65I 123 143 J 123 143K 308 385
Pipe bend (Item 4)DIN 28637, nodular graphite iron(EN-GJS-400-15), with 1 set of installation accessories for a flange connection. Flanges PN 10/16, to DIN 2501, DN 65 for TP 65 only
Installation accessories (Item 5)For a flange to flange connection, with 4 screws and nuts and 1 flat seal. Flanges PN 10/16, to DIN 2501, DN 65 for TP 65 only
1
4
5
3
2
1
1
6
A
C
B
D
E
F
H
G
JI
K
165
165
47As of: 06/2004 - Subject to change without prior notice
Wastewater/DrainageWilo-Drain TP 50, TP 65
Mechanical Accessories
Subm
ersi
ble
pum
ps
Portable wet sump installation TP 50 and 65Base plate (Item 9)For TP 65, made of galvanised steel, consisting of:1 base plate and mounting hardware (base plate prevents pump from sinking when set on sludgy ground)
Chain (Item 6)Made of galvanised steel, including stainless steel shackles, length: 5m, lifting capacity: 250kg.
Counter flange (Item 11)Made of galvanised steel, incl. installation accesso-ries DN 50 on Rp 2 female thread (TP 50)DN 65 on Rp 2 1/2 female thread (TP 65)
Pipe bend (Item 4)Made of galvanised steel, with male/female thread R/G 2 or 2 1/2
TP 50 TP 65A 130 165 B G 2 G 21/2C 140 176 D R 2 R 2 1/2
Hose connection (Item 12)Direct connection for hose, including hose clip
TP 50 TP 65E G 2 G 2 1/2 F 90 100G 60 70
Storz fixed coupling (Item 13)Made of aluminium, cam distance 66 mm, male thread R 2 (TP 50)Male thread G 2 1/2 (TP 65)
Storz hose coupling (Item 14)Made of aluminium, to DIN 14321, Storz 52-C for hose inner diameter 52 mm, incl. hose clip, cam distance 66 mm
Pressure hose (Item 15)TP 50: Made of synthetic material, PN 6, hose inner diameter 52/60 mm, length: 10mTP 65: Made of synthetic material, PN 8, manu-factured to DIN 14811, hose inner diameter 70 mm, For Item 12, length: 10 m or:Pressure hose for Storz hose coupling, made of synthetic material, PN 8, incl. hose clip, for Storz 52-C connection, hose inner diameter 52 mm, length: 10 m
Pipe bend (Item 16)for hose connection including installation accesso-ries for direct connection
TP 50 TP 65H 60 70H I 188 170 K 110 75DN 50: PlasticDN 65: Cast iron 25 (EN-GJL-250)
13
14
9
6
15
11
15
12
4
11
4
250 25
25
300
300
Rp 2
A
B
CD
F Ø GE
G21
/2
Ø
37
66
90
Ø 5
2
66
Ø 4
5
can be wound up
H
KDN 50/65
I
48 As of: 06/2004 - Subject to change without prior notice
Hot WaterWilo-Drain TMT/TMC, VC
Product Description
Wilo-Drain TMT/TMCSubmersible wastewater pumps
Type keyExample: Wilo-Drain TMC 30-0.5TM Submersible pump
T For hot domestic wastewater up to 95 °CC For industrial wastewater up to 95 °C
30 Nominal diameter of delivery connection (DN 32)-0.5 Rated motor power [kW]
ApplicationsSpecially constructed submersible pump for municipal and domestic use to handle e.g. condensate, hot water and aggressive media.
DesignOil-immersed, leak-proof encapsulated, noiseless three-phase squirrel-cage motor, free of radio frequency interference. A fault current safety switch (mandatory for outdoor installations) for a breaking current of 30 mA must be fitted by the customer, in accord-ance with EN 60335-2, 41.
Scope of deliveryPump with permanently connected supply line with bare cable end and installation and operating manual. (Motor protection onsite by others).
Hot WaterWilo-Drain TMT/TMC, VCProduct Description
Wilo-Drain VCVertical wastewater pump
Type keyExample: Wilo-Drain VC 32/10VC Vertical wastewater pump
32 Nominal diameter of discharge port [mm]/10 Max. delivery head [m]
ApplicationsWilo-Drain VC pumps are ideal for conveying wastewater that con-tains solid matter with a maximum diameter of 5 mm or 7 mm (VC 40). They have been specifically designed for conveying media up to 100 °C (e.g. condensate, pump sumps of boiler plants, base-ments at risk of flooding).Suitable for installation:– On completely level ground– With shaft always vertical– VC 40 suspended from flange
Design
Float switchVC 32: Built into motorVC 40: Separated from motor
Electrical dataVC 32: 1~230 V with 40 µF capacitorVC 40: 3~230/400 V motor protection switch required on site.
Scope of deliveryPump with attached float switch and installation and operating manual.
49As of: 06/2004 - Subject to change without prior notice
Hot WaterWilo-Drain TMT/TMC, VC
Pump Equipment/Function
Subm
ersi
ble
pum
ps
• = available or authorised, – = not available or not authorised
Pump Equipment/Function Wilo-DrainTMT/TMC
Wilo-Drain VC 32/40
Operating mode: Intermittent service S3
Frequency switching/h [%] 25 25
Max. frequency switching/h 50 20
Recommended frequency switching/h 20 20
Operating mode: Continuous service S1
Motor below water • –
Motor air-cooled – •(2 hours/day)
Pump/motor seals
In pumping medium area: Mechanical seal • –
On the motor compartment side: Shaft seal • –
Oil seal chamber • –
Design
Wet sump installation Stationary • • (pump only)
Portable • –
Dry sump installation Stationary – –
Submersible • • (pump housing only)
Open multi-vane impeller • •
Materials
Motor Cast aluminium – •
Stainless steel • –
Bronze • –
Cast iron • –
Pump cast iron • •
Bronze • –
Equipment
Power cable [m] 5 –
Attached float switch – •
Capacitor box – •
50 As of: 06/2004 - Subject to change without prior notice
Hot WaterWilo-Drain TMT/TMC, VC
Technical Data
• = available or authorised, – = not available or not authorised1) above water
Wilo-Drain TMT/TMC... Wilo Drain VC ...Technical Data TMT 30-0.5
Cast ironTMC 30-0.5
BronzeTMC 30-0.7
Stainless steelVC 32/10 VC 40/20
Approved fluidsHeating water • • • • •
Hot water • • • • •
Boiler feed water • • • • •
Pump sumps of boiler plants • • • • •
Condensate • • • • •
Drainage water • • • • •
Rainwater • • • • •
Salt water – • – – –
Wastewater, flood and river water • • • • •
Highly dilute alkalines • – – – –
Strong alkalines – • – – –
Media with low aggressiveness • – – – –
Acidic water – – • – –
Aggressive media – • • – –
PerformanceRated motor power P2 [kW] 0.55 0.55 0.75 0.37 2.20
Rated current for 1~230 V [A] – – – 3.65 –
Rated current for 3~400 V [A] 1.9 1.9 1.9 0.88 4.40
Rated current for 3~230 V [A] – – – 1.59 7.60
Speed [rpm] 2,870 2,870 2,870 2,900 2,900
MotorProtection class IP 68 IP 68 IP 68 IP 54 IP 54
Insulation class H H H F F
PumpSubmersion depth, max. [m] 5 5 5 – –
Fluid temperature, max. [°C] 95/65 1) 95/65 1) 95/65 1) + 5 up to + 100
Solid matter grain size [mm] 10 10 10 5 7
Cable type SiAF SiAF SiAF – –
Cable length [m] 5 5 5 – –
Cable cross-section 3~400 V [mm2] 4x 1.5 4x 1.5 4x 1.5 – –
Type of power cable solid – –
Activation type direct direct
Dimensions
Discharge port DN/Rp 1 1/4 1 1/4 1 1/2 1 1 1/2
Weight [kg] 30 33 32 36 75
MaterialsPump housing EN-GJL-250 G-CuSn 10 1.4408 Cast iron
Impeller EN-GJL-250 G-CuSn 10 1.4408 1.4028 EN-GJL-250
Shaft 1.4122 1.4122 1.4571 Stainless steel
Base plate – – – EN-GJL-250
Lower sliding bearing – – – G-CuSn 10
Intake sieve – – – Noryl (GFN 3)
Float – – – Polypropylene
Mechanical seal Double, carbon/ceramic Single, carbon/ceramic – –
Static seals FPM PTFE/Teflon – –
Motor housing EN-GJL-250 G-Cu SN 10 1.4402 Aluminium
51As of: 06/2004 - Subject to change without prior notice
Hot WaterWilo-Drain TMT/TMC
Pump Curves, Dimension Drawing, Dimensions, Weights
Subm
ersi
ble
pum
ps
Dimensions, weights
TMT/TMCWilo-Drain TMT/TMCPump Curves, Dimension Drawing, Dimensions, Weights
2-pole, 50 Hz
1 = TMT/TMC 30-0.52 = TMC 30-0.7
Dimension drawing
Discharge port Height Pump diameter Weight
– L1 L2 D –
Rp [mm] [kg]
Wilo-Drain TMT 30-0.5 cast iron 1 1/4 455 388 183 30
Wilo-Drain TMC 30-0.5 bronze 1 1/4 455 388 183 33
Wilo-Drain TMC 30-0.7 stainless steel 1 1/2 466 392 200 32
0 [l/s]
2
8
4
0
H
Q
10
12
1,0 2,0
Wilo-DrainTMT/TMC
6
3,0 4,0 5,0
2
1
0 4 8 12 16
[m]
[m3/h]
52 As of: 06/2004 - Subject to change without prior notice
Hot WaterWilo-Drain VC 32, VC 40
Pump Curves, Dimension Drawing, Dimensions
Dimensions
VCWilo-Drain VC 32, VC 40 Pump Curves, Dimension Drawing, Dimensions
2-pole, 50 Hz
1 = VC 32/102 = VC 40/20
Dimension drawing
Dischargeport
Dimensions
– H P H1 Ø D h1 h2 h3 P1
Rp [mm]
Wilo-Drain VC 32/10 1 1,240 300 1,020 230 160 610 250 141
Wilo-Drain VC 40/20 1 1/2 1,400 458 1,034 325 130 740 130 190
2
8
4
14
0
H
Q
10
12
20
16
18
6
0 2 4 6 8 10 12 14 16
Wilo-Drain VC
1
2
[m]
[m3/h]
53As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 40 S/25, TP 40 S
Product Description
Subm
ersi
ble
pum
ps
Wilo-Drain TP 40 S/25, TP 40 SSubmersible sewage pump with macerator, 2-pole
Type keyExample: Wilo-Drain TP 40 S 25
TP Submersible pump
40 Nominal diameter [mm]S Impeller type S = Macerator25 Max. delivery head [m]
ApplicationsWilo-Drain TP 40 S submersible sewage pumps with macerator are ideal for conveying household sewage including faeces. The Wilo macerator disintegrates the solid contents to particle sizes small enough to pass through the pump impeller. Preferred application is the pressurised waste disposal which is applied in such cases where costs for the conventional gravity sewage displacement become unjustifiably high, such as the following situations:– high ground water levels– insufficient ground gradients– intermittent generation of sewage – holiday home, camping grounds etc.Because of the low line diameter, e.g. DN 40, the installation costs are reduced dramatically.Suitable for:– Stationary wet sump installation– Portable
DesignMonobloc submersible sewage pump with macerator for vertical wet sump installation.– Novel patented macerator– Free flow to the impeller– Inside rotating cutting– Conically designed macerator– Disintegrating particles– Drawing cutting action
MotorThree-phase asynchronous motor 3~400 V, 50 Hz or AC motor 1~230 V, 50 Hz each with protection class IP 68, protected by ther-mal winding contacts, insulation class F. Stainless steel motor design for TP 40 S/25.
BearingsThe motor shaft is bedded in permanently lubricated roller bearings.
Shaft sealTP 40 S: Mechanical seal bidirectional and shaft seal on the pump side and motor side. Oil-filled intermediate chamber for cooling and lubrica-tion.
TP 40 S/25: Bidirectional mechanical seal on the motor side, shaft seal on the pump side. Oil-filled intermediate chamber for cooling and lubrica-tion.
Hydraulic dataClosed single-vane impeller (with a free ball passage of 10 mm) in conjunction with a patented macerator ensures non-clogging pump-ing and maximum efficiency.
Scope of deliveryFully assembled pump with 10 m power cable and bare cable end at 3~400 V; 10 m power cable and switch box (terminal strip) at 1~230 V.
Sewage/FaecesWilo-Drain TP 40 S/25, TP 40 S Product Description
54 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 40 S/25, TP 40 S
Pump Equipment/Function
• = available, – = not available
Pump Equipment/Function Wilo-Drain TP40 S/25 Wilo-Drain TP 40 S
Operating mode S3 (intermittent service)
Frequency switching/h [%] 25 25
Max. frequency switching/h 50 50
Recommended frequency switching/h 20 20
Operating mode S1 (continuous service)
Motor below water • •
Pump/motor seals
In pumping medium area: Mechanical seal • •
On the motor compartment side: Mechanical seal – •
Shaft seal • –
Oil seal chamber • •
Design
Wet sump installation Stationary • •
Portable • •
Submersible • •
Closed single-vane impeller • •
Macerator • •
Materials
Motor Stainless steel • –
Cast iron – •
Pump Cast iron • •
Equipment
Motor monitor (temperature) • •
Power cable [m] 10 10
Detachable power cable • •
Capacitor box •(1~230 V model only)
•(1~230 V model only)
55As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 40 S/25, TP 40 S
Technical Data
Subm
ersi
ble
pum
ps
• = available or authorised, – = not available or not authorised
Wilo-Drain TP ...
Technical Data
TP 4
0 S/
25
TP 4
0 ...
S 12
0/11
TP 4
0 ...
S 12
8/13
TP 4
0 ...
S 13
5/15
TP 4
0 ...
S 15
4/22
TP 4
0 ...
S 16
0/26
TP 4
0 ...
S 16
4/28
Approved fluids
Domestic wastewater and sewage including faeces • • • • • • •
Performance
Power consumption P1 1~230 V [kW] 2.0 – 2.0 – – – –
Power consumption P1 3~400 V [kW] 2.0 1.3 1.7 1.7 2.6 3.2 3.5
Rated motor power P2 [kW] 1.5 1.0 1.3 1.4 2.1 2.5 2.8
Rated current for 1~230 V [A] 10.6 – 9.5 – – – –
Rated current for 3~400 V [A] 3.8 2.5 3.1 3.5 4.4 5.8 6.3
Motor
Protection class for max. submersion depth IP 68 IP 68 IP 68 IP 68 IP 68 IP 68 IP 68
Insulation class F F F F F F F
Pump
Fluid temperature, max. [°C] 35/40 35/40 35/40 35/40 35/40 35/40 35/40
Cable type H07 RN-F
Cable length [m] 10 10 10 10 10 10 10
Cable cross-section 1~230 V [mm2] 1.5 – – – – – –
Cable cross-section 3~400 V [mm2] 1.0 7x 1.5 7x 1.5 7x 1.5 7x 1.5 7x 1.5 7x 1.5
Type of power cable longitudinal watertight/plug
Activation type direct
Explosion protection EEx d ll B T4 (3~400 V only)
Dimensions
Weight [kg] 30 49 54 53 59 60 60
Materials
Pump housing EN-GJL-200
Impeller EN-GJL-200
Shaft 1.4435 1.4021 1.4021 1.4021 1.4021 1.4021 1.4021
Pump side: Mechanical seal(bidirectional) SiC/SiC
Motor side: Mechanical seal Carbon/ceramic
Shaft seal NBR – – – – – –
Static seals NBR NBR NBR NBR NBR NBR NBR
Motor housing 1.4301 EN-GJL-250
Macerator 1.4528 1.4528 1.4528 1.4528 1.4528 1.4528 1.4528
56 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 40 S/25
Pump Curve, Dimension Drawing, Dimensions
Dimensions
TP 40 S/25Wilo-Drain TP 40 S/25 Pump Curve, Dimension Drawing, Dimensions
2-pole, 50 Hz
Dimension drawings
Stationary wet sump installation Portable wet sump installation
Wilo-Drain TP 40 S/25
A B1 C D E F G H I J K L M N O T DN1 DN2 a b d e k
[mm]
140 110 14 115 81 160 465 245 56 120 240 120 300 95 134 280 50 40 140 110 155 7 14
4
0
H
12
16
20
24
8
0 2 4 6 8 10 12Q
Wilo-DrainTP 40 S/25
[m]
[m3/h]
A
D E F
B
DN2
C
M
L
70Ø 10
1000
H
G
200 250
70Ø 26,9
Ø 600
L
e
k
d F J
E 308
(300
-330
)
Kba
DN 1
DN 1
/ +
+
/ +
DN2
T
H
NG
K
O
57As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 40 S
Pump Curves, Terminal Diagram
Subm
ersi
ble
pum
ps
Terminal diagram
TP 40 SWilo-Drain TP 40 S Pump Curves, Terminal Diagram
2-pole, 50 Hz
1 = TP 40 S 120/11
2 = TP 40 S 128/13
3 = TP 40 S 135/15
4 = TP 40 S 154/22
5 = TP 40 S 160/26
6 = TP 40 S 164/28
All pump curves shown are based on a density of ρ = 1 kg/dm3
Connection Terminal connections
– Cable type U V W PE T1 T2 DI
TP 40 S ... 1~230 V – 1 (L1) 2 (N) – 0 4 5 –
TP 40 S ... 3~400 V 6x 1.52 1 2 3 0 4 5 –
Q
8
20
16
4
12
H
24
28
32
36Wilo-DrainTP 40 S
56
4
3210
0 2 4 6 8 10 12 1614 18
[m]
[m3/h]
58 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 40 S
Dimension Drawing, Dimensions
Dimensions
* DN 40: Portable wet sump installation/ DN 50 stationary wet sump installation
Dimension drawings
Stationary wet sump installation Portable wet sump installation
Dimension Drawing, Dimen-sions Dimensions
A B C D E F G H I J K L M N O T H1 DN2* a b d e k
[mm]
TP 40 S 120/11 140 110 14 115 81 163 400 245 53 170 235 120 235 120 168 340 220 40/50 140 110 155 7 14
TP 40 S 128/13TP 40 S 135/15
140 110 14 115 81 163 450 245 53 170 235 120 235 120 167 340 220 40/50 140 110 155 7 14
TP 40 S 154/22TP 40 S 160/26TP 40 S 164/28
140 110 14 115 81 170 435 245 53 170 250 120 235 120 165 340 220 40/50 140 110 155 7 14
Ø 1000
Ø 600
2
250200 310
K
(300
-330
)
L
I
≥ 70
Ø 10
E
e
d JF
k
a b
DN
M
A
B
D
C
E F
Ø 26,9
70
H
≥ I
G
+
/ +
2 1T
NG
H
OT
DN
59As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 40 S/25, TP 40 S
Mechanical Accessories
Subm
ersi
ble
pum
ps
Stationary wet sump installation Wilo-Drain TP 40 S/25, TP 40 SMechanical Accessories
TP 40 S/25
TP 40 S
Base elbow TP 40 S (Item 1a)Made of cast iron 25 (EN-GJL-250), including pump support, profile seal, accessories for installation and fastening to the ground, and guide pipe bracket, discharge connection DN 50
The double pipe guide R 3/4 must be provided on-site.
Base elbow incl. cable guide TP 40 S/25 (Item 1b)Made of cast iron 25 (EN-GJL-250), including pump support, profile seal, accessories for installation and fastening to the ground, and guide pipe bracket. Complete 7 m cable guide for 3.5 m installation depth. For connection DN 50 or DN 65.Alternatively, on-site installation with Ø 1" guide pipe possible.
Chain (Item 6)including stainless steel shackles, length: 5 and 10 m
Check valve body (Item 2)DN 50, cast iron 25 (EN-GJL-250), flanges PN 10/16, with unrestricted passage, cleaning port and ventilation device including installation acces-sories, draw. No. 53.4-309.
Gate valve (Item 3)DN 50, cast iron 25 (EN-GJL-250) flanges PN 10/16, incl. installation accessories
Pipe bend (Item 4)Nodular graphite iron (EN-GJS-400-15), DIN 28637, DN 50, flanges PN 10/16, incl. 1 set of installation accessories.
Y-piece (Item 8)Made of steel 37, with 2 sets of installation acces-sories, flanges PN 10/16, to DIN 2501, DN 50/50/50.
6
5
4
3
2
1a
1
1b
3
2
4
1
6
140
163
10682
90
Ø 25
70
235
160
120
225
150
150
300
242
203
200
150
235
150
150
123
123
308
60 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 40 S/25, TP 40 S
Mechanical Accessories
Portable wet sump installation
TP 40 S/25
TP 40 S
Adjusting support (Item 9)Made of steel, including mounting hardware
Pipe bend (Item 4a)Nodular graphite iron (EN-GGS-400-15), to DIN 28637, R 2
Pipe bend (Item 4)Nodular graphite iron (EN-GGS-400-15), to DIN 28637, R 40, flanges:PN 6, DIN 2531PN 10/16, DIN 2533, incl. 1 set of installation accessories (TP 40/S 25)
Chain (Item 6)including stainless steel shackles, length: 5 m and 10 m, lifting capacity: 400 kg
6
4
9
4
6
9
Ø 3
40
Ø 340
120
R 2
R 2
140
140
61As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Product Description
Subm
ersi
ble
pum
ps
Wilo-Drain STC 80/100Submersible sewage pump
Type keyExample: Wilo-Drain STC 80 E 17.95/37.5
STC Submersible pump80 Nominal diameter [mm]
E Impeller type: E = Single-vane impellerM = Multi-vane impeller
17 Max. delivery head when Q = 0 [m]
95 Max. volume flow [m3/h]37.5 Performance rating P2 [kW] = value/10 = 3.75 kW
ApplicationsWilo-Drain STC submersible pumps are ideal for pumping faeces, municipal and industrial sewage containing long-fibre particles in the following areas:– Building and surface drainage– Sewage disposal and conservation– Environmental protection and sewage farm technology– Industrial and process engineering
DesignMonobloc submersible sewage pump for vertical wet sump installa-tion.
Scope of deliveryFully assembled pump with 15 m power cable with bare cable end and installation and operating manual. Non standard cable lengths on request
Wilo-Drain STC 80/100, STS 80/100, TP 80-150Product Description
Wilo-Drain STSSubmersible sewage pump
Type keyExample: Wilo-Drain STS 80 F 81.120/20STS Submersible pump80 Nominal diameter [mm]F Free-flow impeller
81 Max. delivery head when Q = 0 [m]120 Max. volume flow [m3/h]20 Performance rating P2 [kW] = value/10 = 2.0 kW
ApplicationsWilo-Drain STS submersible pumps are ideal for pumping faeces, municipal and industrial sewage containing long-fibre particles in the following areas:– Building and surface drainage– Sewage disposal and conservation– Environmental protection and sewage farm technology– Industrial and process engineering
High operating reliability due to unrestricted free spherical passage.Suitable for:– Stationary wet sump installation– Portable wet sump installation
DesignMonobloc submersible sewage pump for vertical wet sump installa-tion.– Detachable power cable– Large free ball passage– Corrosion- and wear-resistant
MotorThree-phase asynchronous motor 3~400 V, 50 Hz, protection class IP 68, thermal winding contacts. Insulation class F Other operating voltages and frequencies upon request.
BearingsThe motor shaft is bedded in permanently lubricated, low-mainte-nance roller bearings.
Shaft sealMechanical seal on the motor side and shaft seal on the pump side.
Scope of deliveryFully assembled pump with 10 m power cable with bare cable end and installation and operating manual. Non standard cable lengths on request
62 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Product Description
Wilo-Drain TP 80-150Submersible sewage pump
Type keyExample: Wilo-Drain TP 100 E 210/52TP Submersible pump
100 Nominal diameter [mm]E Impeller type:
E = Single-vane impellerF = Free-flow impellerM = Multi-vane impeller
210 Impeller nominal diameter [mm]/52 Performance rating P2 [kW] = value/10 = 5.2 kW
ApplicationsWilo-Drain TP 80 up to 150 are ideal for pumping faeces, municipal and industrial sewage containing long-fibre particles in the following areas:– Building and surface drainage – Sewage disposal and conservation– Environmental protection and sewage farm technology– Industrial and process engineeringHigh operating reliability due to unrestricted free spherical passage. Low weight, thus ideally suited for emergency situations. Suitable for:– Stationary wet sump installation– Portable wet sump installation– Vertical dry sump installations (without explosion protection)– Horizontal dry sump installation upon request
DesignMonobloc submersible sewage pump for vertical wet or dry sump installation.– Inox & Composite– Fitted as standard with explosion protection with thermal winding
system (WSK) connected and completely submersed hydraulic system. Follow the instructions in the installation and operating manual.
– Low weight – Leak monitoring– Forced-flow casing cooling – Detachable power cable– Large free ball passage– Corrosion and wear-resistant– Oil-free intermediate chamber
MotorThree-phase asynchronous motor 3~400 V, 50 Hz, protection class IP 68, leak monitoring, thermal winding contacts. Insulation class F. Other operating voltages and frequencies upon request.
Note: When connecting switchgear that is provided on-site, use the SK 545 trigger device (see electrical accessories) for connecting the thermal winding contacts (WSK) and leak monitoring (WSK connection is at max. 30 V, max. 30 mA, follow the operating manual).
BearingsThe motor shaft is bedded in permanently lubricated, low-mainte-nance roller bearings.
Motor coolingContinuous, non-clogging forced-flow casing cooling with patented return pipe.
Shaft sealDouble, pump- and motor-end, bidirectional mechanical seals.
Leak monitoringSignals the ingress of moisture into the motor compartment.
Hydraulic dataStandard supply with patented spiral baseplate for choke-free con-tinuous duty (single-vane impeller).TP 80: Single-vane impeller/free-flow impeller
Free ball passage 80 mmTP 100: Single-vane impeller/free-flow impeller
Free ball passage 80/95 mmTP 150: Single-vane impeller/free-flow impellerMulti-vane
impellerFree ball passage Ø 100 mm
Scope of deliveryFully assembled pump with 10 m power cable with bare cable end and installation and operating manual. Non standard cable lengths on request
63As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Pump Equipment/Function STC 80/100
Subm
ersi
ble
pum
ps
• = available, – = not available
Pump Equipment/Function STC 80/100 Wilo-Drain ...
STC
80 E
17.
95/3
7.5
STC
80 E
24.
65/3
7.5
STC
80 E
24.
95/5
0ST
C 80
E 3
1.55
/50
STC
80 F
33.
65/1
05
STC
80 F
33,
120/
155
STC
80 F
38,
100/
155
STC
80 F
45,
100/
155
STC
80 F
51.
70/1
55
STC
100
E 19
,180
/65
STC
100
E 24
,200
/100
STC
100
E 28
,150
/100
STC
100
M 4
0,19
0/25
0ST
C 10
0 M
50,
140/
250
STC
100
M 6
0,16
5/34
0
Operating mode S1 (continuous service)
Motor below water • • • • • •
Pump/motor seals
In pumping medium area: Mechanical seal • • • • • •
On the motor compartment side: Mechanical seal – – – – – •
Shaft seal • • • • • –
Oil seal chamber • • • • • •
Design
Wet sump installation Stationary • • • • • •
Portable • • • • • •
Submersible • • • • • •
Closed single-vane impeller • • – – • –
Closed multi-vane impeller – – – – – •
Free-flow impeller – – • • – –
Materials
Motor Cast iron • • • • • •
Pump Cast iron • • • • • •
Equipment
Motor monitor (temperature) • • • • • •
Power cable [m] (other lengths upon request) 15 15 15 15 15 15
64 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Pump Equipment/Function STS 80/100
• = available, – = not available
Pump Equipment/Function STS 80/100 Wilo-DrainSTS 80
Wilo-DrainSTS 100
Operating mode S3 (intermittent service)
Frequency switching/h [%] 25 25
Max. frequency switching/h 20 20
Recommended frequency switching/h 20 20
Operating mode S1 (continuous service)
Motor below water • •
Pump/motor seals
In pumping medium area: Mechanical seal SiC/SiC SiC/SiC
On the motor compartment side: Shaft seal NBR NBR
Oil seal chamber • •
Design
Wet sump installation Stationary • •
Portable • •
Submersible • •
Free-flow impeller • •
Materials
Motor Stainless steel • •
Pump Cast iron • •
Equipment
Motor monitor (temperature) • •
65As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Pump Equipment/Function TP 80-150
Subm
ersi
ble
pum
ps
• = available, – = not available
Pump Equipment/Function TP 80-150 Wilo-Drain TP 80
Wilo-Drain TP 100
Wilo-Drain TP 150
Operating mode S3 (intermittent service)
Frequency switching/h [%] 25 25 25
Max. frequency switching/h 20 20 20
Recommended frequency switching/h 20 20 20
Operating mode S1 (continuous service)
Motor below water and above water • • •
Pump/motor seals
In pumping medium area: Mechanical seal • • •
On the motor compartment side: Mechanical seal • • •
Oil seal chamber • • •
Design
Wet sump installation Stationary • • •
Portable • • •
Mobile•
(available as a special model upon request only)
•(available as a special model
upon request only)
•(available as a special model
upon request only)
Dry sump installation Vertical • • •
Horizontal•
(available as a special model upon request only)
•(available as a special model
upon request only)
•(available as a special model
upon request only)
Submersible • • •
Open single-vane impeller • • •
Open multi-vane impeller • • •
Free-flow impeller • • •
Turbulator • • •
Non-clogging cooling system • • •
Materials
Motor Stainless steel • • •
Pump Plastic • • •
Equipment
Motor monitor (temperature) • • •
Motor monitor (leaks) • • •
Explosion protection • • •
Forced-flow casing cooling • • •
Power cable [m] 10 10 10
Detachable power cable • • •
Attached float switch – – –
66 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Technical Data STC 80
Wilo-Drain STC 80...
Technical Data STC 80
E 17
.95/
37.5
E 24
.65/
37.5
E 24
.95/
50
E 31
.55/
50
F 33
.65/
105
F 33
.120
/155
F 38
.100
/155
F 45
.100
/155
F 51
.70/
155
Approved fluids
Washing machine soap and water mixture (without long-fibre particles) •
Water from car wash facilities •
Non-chlorinated pool water •
Water from firefighting systems •
Heating water • (up to 40 °C)
Hot water • (up to 40 °C)
Boiler feed water • (up to 40 °C)
Condensate • (up to 40 °C)
Cooling (condenser) water •
Clean water •
Untreated wastewater •
Drainage water •
Partially desalinated water •
Rainwater •
Swimming pool water Conditionally
Sea water Conditionally
Wastewater, flood and river water •
Domestic wastewater and sewage including faeces •
Faeces, municipal and industrial sewage containing long-fibre particles •
Gaseous and non-gaseous sludge (up to 10% by volume of dry substance) Gaseous: conditionally, otherwise • (Impeller E up to 8%, F up to 10%)
Highly dilute alkalines •
Strong alkalines Conditionally
Media with low aggressiveness •
Acidic water Conditionally
Aggressive media Conditionally
Performance
Power consumption P1 3~400 V [kW] 4.7 4.7 6.0 6.0 12.3 18.6 18.6 18.6 18.6
Rated motor power P2 [kW] 3.75 3.75 5.0 5.0 10.5 15.5 15.5 15.5 15.5
Rated current for 3~400 V [A] 7.6 7.6 9.7 9.7 20.5 30.5 30.5 30.5 30.5
Motor
Protection class for max. submersion depth IP 68
Insulation class F
Frequency switching [per hour] 15
67As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Technical Data STC 80
Subm
ersi
ble
pum
ps
• = available or authorised, – = not available or not authorised
Pump
Submersion depth, max. [m] 12.5
Fluid temperature [°C] 40
Fluid temperature permissible for short periods [°C] 60
Fluid density, max. [kg/m3] 1050
Cable type H07 RN-F, round Power supply: NSSHÖU-JControl line: NSSHÖU-O
Cable length [m] 15
Cable cross-section 3~400 V [mm2] 7G1.5 10G1.5 Power supply: 7x2.5Control line: 2x1.5
Type of power cable Rubber sheathed cable
Activation type direct Star-delta
Oil volume of seal housing [l] 0.55 0.55 0.55 0.55 2 3.3 3.3 3.3 3.3
Free ball passage [mm] 70 70 70 70 80 80 80 50 50
Dimensions
Discharge port DN 80 80 80 80 80 80 80 80 80
Weight [kg] 55 55.5 59 59.5 119 163 163.5 162 162
Materials
Pump housing EN-GJL-200
Impeller EN-GJS-500-7 EN-GJL-200 EN-GJS-500-7
Shaft 1.4021
Mechanical seal (bidirectional), pump side SiC/SiC
Static seals FPM/NBR
Shaft seal on motor side FPM NBR
Motor housing EN-GJL-200
Wilo-Drain STC 80...
Technical Data STC 80
E 17
.95/
37.5
E 24
.65/
37.5
E 24
.95/
50
E 31
.55/
50
F 33
.65/
105
F 33
.120
/155
F 38
.100
/155
F 45
.100
/155
F 51
.70/
155
68 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Technical Data STC 100
Wilo-Drain STC 100...
Technical Data STC 100
E 19
.180
/65
E 24
.200
/100
E 28
.150
/100
M 4
0.19
0/25
0
M 5
0.14
0/25
0
M 6
0.16
5/34
0
Approved fluids
Washing machine soap and water mixture (without long-fibre particles) •
Water from car wash facilities •
Non-chlorinated pool water •
Water from firefighting systems •
Heating water • (up to 40 °C)
Hot water • (up to 40 °C)
Boiler feed water • (up to 40 °C)
Condensate • (up to 40 °C)
Cooling (condenser) water •
Clean water •
Untreated wastewater •
Drainage water •
Partially desalinated water •
Rainwater •
Swimming pool water Conditionally
Sea water Conditionally
Wastewater, flood and river water •
Domestic wastewater and sewage including faeces •
Faeces, municipal and industrial sewage containing long-fibre particles •
Gaseous and non-gaseous sludge (up to 10% by volume of dry substance)
Gaseous: conditionally, otherwise • (Impeller E up to 8%, F up to 10%)
Highly dilute alkalines •
Strong alkalines Conditionally
Media with low aggressiveness •
Acidic water Conditionally
Aggressive media Conditionally
Performance
Power consumption P1 3~400 V [kW] 8.2 12.2 12.2 28.5 28.5 39.0
Rated motor power P2 [kW] 6.5 10.0 10.0 25.0 25.0 34.0
Rated current for 3~400 V [A] 13.5 21.0 21.0 49.5 49.5 68
Motor
Protection class for max. submersion depth IP 68
Insulation class F
Frequency switching [per hour] 15
69As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Technical Data STC 100
Subm
ersi
ble
pum
ps
• = available or authorised, – = not available or not authorised
Pump
Submersion depth, max. [m] 12.5
Fluid temperature [°C] 40
Fluid temperature permissible for short periods [°C] 60
Fluid density, max. [kg/m3] 1,050
Cable type H07 RN-F, round Power supply: NSSHÖU-JControl line: NSSHÖU-O
Cable length [m] 15
Cable cross-section 3~400 V [mm2] 10G1.5 Power supply: 2x(4x4)Control line: 2x1.5
Powersupply: 7x2.5Control line:
2x1.5
Type of power cable Rubber sheathed cable
Activation type Star-delta
Oil volume of seal housing [l] 2 2 2 8.6 8.6 8.6
Free ball passage [mm] 80 80 80 80 80 80
Dimensions
Discharge port DN 100 100 100 100 100 100
Weight [kg] 106 137 139 361 376 415
Materials
Pump housing EN-GJL-250 EN-GJS-500-7
Impeller EN-GJL-250 EN-GJS-500-7
Shaft 1.4021
Mechanical seal (bidirectional), pump side SiC/SiC Cartridge: SiC/SiC, housing: 1.4021
Mechanical seal (bidirectional), motor side – Cartridge: SiC/SiC, housing: 1.4021
Static seals FPM/NBR
Shaft seal on motor side FPM –
Motor housing EN-GJL-250 EN-GJL-250
Wilo-Drain STC 100...
Technical Data STC 100
E 19
.180
/65
E 24
.200
/100
E 28
.150
/100
M 4
0.19
0/25
0
M 5
0.14
0/25
0
M 6
0.16
5/34
0
70 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Technical Data STS 80/100
Wilo-Drain ...
STS 80 STS 100
Technical Data STS 80/100
F 7.
110/
20
F 9.
120/
24
F 10
.120
/27
F 12
.120
/32
F 14
.100
/40
F 10
.170
/59
F 12
.170
/72
F 15
.170
/84
Approved fluids
Washing machine soap and water mixture (without long-fibre particles) •
Water from car wash facilities •
Non-chlorinated pool water •
Water from firefighting systems •
Heating water • (up to 40 °C)
Hot water • (up to 40 °C)
Water from boilers • (up to 40 °C)
Condensate • (up to 40 °C)
Cooling (condenser) water •
Clean water •
Untreated wastewater •
Drainage water •
Partially desalinated water •
Rainwater •
Swimming pool water –
Sea water –
Wastewater, flood and river water •
Domestic wastewater and sewage including faeces •
Faeces, municipal and industrial sewage containing long-fibre particles •
Gaseous and non-gaseous sludge (up to 10% by volume of dry substance) Gaseous: conditionally, otherwise • (up to 10%)
Highly dilute alkalines •
Strong alkalines Conditionally
Media with low aggressiveness •
Acidic water Conditionally
Aggressive media Conditionally
Performance
Power consumption P1 3~400 V [kW] 2.7 3.4 3.7 4.5 5.3 7.1 8.8 10.1
Motor power P2 [kW] 2.0 2.4 2.7 3.2 4.0 5.9 7.2 8.4
Rated current for 3~400 V [A] 6.1 6.7 7.0 8.0 8.9 14.2 16.5 18.5
Speed [rpm] 1,450
Motor
Protection class for max. submersion depth IP 68
Insulation class F
Frequency switching [per hour] 20
71As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Technical Data STS 80/100
Subm
ersi
ble
pum
ps
• = available or authorised, – = not available or not authorised
Pump
Submersion depth, max. [m] 10
Fluid temperature [°C] 40
Fluid temperature permissible for short periods [°C] 60
Fluid density, max. [kg/m3] 1050
Cable type H07 RN-F, round
Cable length [m] 10
Cable cross-section 3~400 V [mm2] 7xG 1.5 strand 6 not occupied 10xG 1.5 strand 9 not occupied
Plug CONI Strands with flat plug
Type of power cable OZOFLEX Plus (H07 RN-F)
Activation type direct Star-delta
Oil volume of oil chamber [l] 0.17 0.35
Free ball passage [mm] 75 100
Dimensions
Discharge port DN 80 100
Weight [kg] 70 96
Materials
Pump housing EN-GJL-250
Impeller EN-GJL-250
Shaft 1.4021
Mechanical seal (bidirectional), pump side SiC/SiC
Static seals NBR
Shaft seal on motor side NBR
Motor housing 1.4404
Wilo-Drain ...
STS 80 STS 100
Technical Data STS 80/100
F 7.
110/
20
F 9.
120/
24
F 10
.120
/27
F 12
.120
/32
F 14
.100
/40
F 10
.170
/59
F 12
.170
/72
F 15
.170
/84
72 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Technical Data TP 80
• = available or authorised, – = not available or not authorised
Wilo-Drain TP 80...
Technical Data TP 80
E 16
0/14
E 17
0/18
E 19
0/26
E 21
0/34
E 23
0/34
F 15
5/20
F 16
5/24
F 18
0/27
F 19
0/32
F 21
0/34
Approved fluidsWashing machine soap and water mixture (without long-fibre particles) •
Water from car wash facilities •
Non-chlorinated pool water •
Water from firefighting systems •
Heating water, boiler feed water • (up to 40 °C)
Condensate • (up to 40 °C)
Cooling (condenser) water •
Clean water •
Untreated wastewater •
Drainage water •
Partially desalinated water •
Rainwater •
Swimming pool water •
Sea water •
Wastewater, flood and river water •
Faeces, municipal and industrial sewage containing long-fibre particles •
Gaseous and non-gaseous sludge (up to 10% by volume of dry substance) •
PerformancePower consumption P1 3~400 V [kW] 1.9 2.3 3.4 4.6 4.6 2.7 3.4 3.7 4.5 4.8
Rated motor power P2 [kW] 1.4 1.8 2.6 3.4 3.4 2.0 2.4 2.7 3.2 3.4
Rated current for 3~400 V [A] 4.5 5.1 6.4 8.0 8.0 6.1 6.7 7.0 8.0 8.4
MotorProtection class for max. submersion depth IP 68
Insulation class F
Frequency switching [per hour] 60
PumpFluid temperature [°C] 40
Cable type NSSHöu
Cable length [m] 10
Cable cross-section 3~400 V [mm2] 7x1.5
Type of power cable longitudinal watertight/terminal strip
Activation type direct
Explosion protection EEx d ll B T4
Free ball passage [mm] 78
DimensionsWeight [kg] 42 43
MaterialsPump housing Polyurethane
Impeller Polyurethane
Shaft 1.0570/1.4404
Mechanical seal (bidirectional), pump side SiC-SiC
Mechanical seal (bidirectional), motor side C-Cr
Motor housing 1.4404
73As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Technical Data TP 100
Subm
ersi
ble
pum
ps
• = available or authorised, – = not available or not authorised
Wilo-Drain TP 100 ...
Technical Data TP 100
E 16
0/14
E 18
0/22
E 21
0/30
E 23
0/34
E 19
0/39
E 21
0/52
E 23
0/70
E 25
0/84
F 15
5/18
F 16
5/22
F 18
0/25
Approved fluidsWashing machine soap and water mixture (without long-fibre particles) •
Water from car wash facilities •
Non-chlorinated pool water •
Water from firefighting systems •
Heating water, boiler feed water • (up to 40 °C)
Condensate • (up to 40 °C)
Cooling (condenser) water •
Clean water •
Untreated wastewater •
Drainage water •
Partially desalinated water •
Swimming pool water •
Sea water •
Wastewater, flood and river water •
Faeces, municipal and industrial sewage containing long-fibre particles •
Gaseous and non-gaseous sludge (up to 10% by volume of dry substance) •
PerformancePower consumption P1 3~400 V [kW] 1.9 2.7 4.0 4.6 4.4 6.2 8.4 10.0 2.5 3.1 3.5
Rated motor power P2 [kW] 1.4 2.2 3.0 3.4 3.9 5.2 7.0 8.4 1.8 2.2 2.5
Rated current for 3~400 V [A] 4.4 5.5 7.5 8.5 10.5 12.8 15.6 18.1 5.0 5.6 6.1
MotorProtection class for max. submersion depth IP 68
Insulation class F
Frequency switching [per hour] 60
PumpFluid temperature, max. [°C] 40
Cable type NSSHöu
Cable length [m] 10
Cable cross-section 3~400 V [mm2] 7x1.5 10x1.5 7x1.5
Type of power cable longitudinal watertight/terminal strip longitudinal watertight/plug longitudinal watertight/
terminal strip
Activation type direct direct or star-delta direct
Explosion protection EEx de ll B T4 EEx d ll B T4
Free ball passage [mm] 78 95 78
DimensionsWeight [kg] 43 60 43
MaterialsPump housing Polyurethane
Impeller Polyurethane
Shaft 1.0570/1.4404
Mechanical seal (bidirectional), pump side SiC – SiC
Mechanical seal (bidirectional), motor side C – Cr
Motor housing 1.4404
74 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Technical Data TP 100, TP 150
• = available or authorised, – = not available or not authorised
Wilo-Drain TP 100 ... Wilo-Drain TP 150 ...
Technical Data TP 100, TP 150
F 18
0/31
F 21
0/34
F 19
5/59
F 22
0/72
F 24
7/84
M 2
35/1
30
M 2
50/1
65
M 2
65/2
00
E 28
0/11
0
E 29
5/15
0
Approved fluidsWashing machine soap and water mixture (without long-fibre particles) •
Water from car wash facilities •
Non-chlorinated pool water •
Water from firefighting systems •
Heating water, boiler feed water • (up to 40 °C)
Condensate • (up to 40 °C)
Cooling (condenser) water •
Clean water •
Untreated wastewater •
Drainage water •
Partially desalinated water •
Swimming pool water •
Sea water •
Wastewater, flood and river water •
Faeces, municipal and industrial sewage containing long-fibre particles •
Gaseous and non-gaseous sludge (up to 10% by volume of dry substance) •
PerformancePower consumption P1 3~400 V [kW] 4.3 4.7 7.1 8.8 10.1 15.4 19.6 23.9 12.6 17.5
Rated motor power P2 [kW] 3.1 3.4 5.9 7.2 8.4 12 16.5 20 10.8 14.8
Rated current for 3~400 V [A] 7.1 8.0 14.2 16.5 18.5 28.9 34 41.6 27.6 34.7
MotorProtection class for max. submersion depth IP 68
Insulation class F
Frequency switching [1/h] 60
PumpFluid temperature, max. [°C] 40 40
Cable type NSSHöu NSSHöu
Cable length [m] 10 10
Cable cross-section 3~400 V [mm2] 7x1.5 10x1.5 7x4 + 5x1.5
Type of power cablelongitudinal watertight/
terminal strip
longitudinal watertight/plug longitudinal watertight/plug
Activation type direct direct or star-delta Star-delta
Explosion protection EEx d ll B T4 EEx d ll B T4 EEx d ll B T4
Free ball passage [mm] 78 95 125
DimensionsWeight [kg] 43 60 112
MaterialsPump housing Polyurethane Polyurethane
Impeller Polyurethane Polyurethane
Shaft 1.0570/1.4404 1.0570/1.4404
Mechanical seal (bidirectional), pump side SiC – SiC SiC – SiC
Mechanical seal (bidirectional), motor side C – Cr C – Cr
Motor housing 1.4404 1.4404
75As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100
Pump Curves
Subm
ersi
ble
pum
ps
STC 80EWilo-Drain STC 80/100Pump Curves
2-pole, 50 Hz
1 = STC 80E 17.95/37.5 2 = STC 80E 24.65/37.5 3 = STC 80E 24.95/50 4 = STC 80E 31.55/50
[ = Q min
] = Q max for pump curve 2
STC 80F
2-pole, 50 Hz
5 = STC 80F 33.65/105 6 = STC 80F 33.120/155 7 = STC 80F 38.100/155
[ = Q min
] = Q max for pump curve 5
Q
Q
[lgpm]
H
00
0 100 200 300 400
2
4
6
8
0
1
2
3
4
5
6
10
12
14
16
18
20
2224
26
28
32
[l/s]20 40 60 80 100 120
0 [m3/h]20 40 60 80 100 120
1
Wilo-DrainSTC 80 E
0 5 10 15 20 25 30 35
2
2
3
3
4
4
1
P 2[W]
[m3/h]
[m]
[
[
][
Q
Q
H
00
10
20
30
40
0
5
10
15
20
25
50
5
15
25
35
45
55
[m3/h]
[lgpm]0 10 20 30 40
1000 200 300 400 500
[l/s]20 40 60 80 100 120 140
0 [m3/h]20 40 60 80 100 120 140
7
7
5
6
6 5
Wilo-Drain STC 80F
[m]
P 2[W]
[
]
[
76 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100
Pump Curves
STC 80F2-pole, 50 Hz
8 = STC 80F 45,100/155 9 = STC 80F 51.70/155 I = Q min
STC 100E/M
4-pole, 50 Hz
1 = STC 100E 19.180/65 2 = STC 100E 24.200/100 3 = STC 100E 28.150/100 4 = STC 100M 40.190/250 5 = STC 100M 50.140/250 6 = STC 100M 60.165/340 I = Q min
Q
Q
H
00
10
20
30
40
0
5
10
15
20
25
50
5
15
25
35
45
55
[m3/h]
[lgpm]0 10 20 30 40
1000 200 300 400 500
[l/s]20 40 60 80 100 120 140
0 [m3/h]20 40 60 80 100 120 140
9
8
9 8
Wilo-Drain STC 80F
[m]
P 2[W]
Q
Q
H
0
10
20
30
40
0
6
12
18
24
30
36
50
60
70
Wilo-Drain STC 100E/M
0 [m3/h]
[lgpm]0 10 20 30 40 50
1000 200 300 400 500 600
[l/s]20 40 60 80 100 120 140 160 180 200 220
0 [m3/h]20 40 60 80 100 120 140 160 180 200 220
60
700 800
6
3
5
2
4
1
3
6
2
5
1
4
[m]
P 2[W]
77As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100
Dimension Drawings, Dimensions
Subm
ersi
ble
pum
ps
Dimensions
Dimension drawingsDimension Drawings, Dimensions
Stationary wet sump installation – STC 80 Stationary wet sump installation – STC 80
Dimensions
A B C D E F G H1 H2 I J Ø K L M N O P Q R
[mm]
STC 80 E 17.95 ... 200 160 18 166 59 90 539 580 580 119 124 344 210 300 15 120 170 264 229
STC 80 E 24.65 ... 200 160 18 166 59 90 539 580 580 119 124 344 210 300 15 120 170 264 229
STC 80 E 24.95 ... 200 160 18 166 59 90 594 635 635 119 124 344 210 300 15 120 170 264 229
STC 80 E 31.55 ... 200 160 18 166 59 90 594 635 635 119 124 344 210 300 15 120 170 264 229
STC 80 F 33.65 ... 200 160 18 166 59 90 753 790 805 110 124 344 210 300 15 120 170 374 340
STC 80 F 33.120 ... 200 160 18 166 59 90 875 910 925 110 124 344 210 300 15 120 170 374 340
STC 80 F 38.100 ... 200 160 18 166 59 90 875 910 925 110 124 344 210 300 15 120 170 374 340
STC 80 F 45.100 ... 200 160 18 166 59 90 832 880 875 125 124 344 210 300 15 120 170 405 350
STC 80 F 51.70 ... 200 160 18 166 59 90 832 880 875 125 124 344 210 300 15 120 170 405 350
DE
F
DN 32
O
N
P
Q
R
DN
80
A
C
B
DN80
I
Hmin.
H1
G
L
M J
Ø K
Hmin.
H2
G
T
U
DN
80
78 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100
Dimension Drawings, Dimensions
Dimensions
Dimension drawings
Stationary wet sump installation – STC 100 Stationary wet sump installation – STC 100
Dimensions
A B C D E F G H1 H2 I J Ø K L M N O P Q R
[mm]
STC 100 E 19.180 ... 220 180 18 176 65 90 664 710 715 120 124 320 225 325 15 160 190 448 394
STC 100 E 24.200 ... 220 180 18 176 65 90 744 670 795 120 124 320 225 325 15 160 190 448 394
STC 100 E 28.150 ... 220 180 18 176 65 90 744 670 795 120 124 320 225 325 15 160 190 448 394
STC 100 M 40.190 ... 220 180 18 241 109 120 1160 1160 1155 183 180 500 320 540
on request
635 563
STC 100 M 50.140 ... 220 180 18 241 109 120 1160 1160 1155 183 180 500 320 540 635 563
STC 100 M 60.165 ... 220 180 18 241 109 120 1230 1230 1225 183 180 500 320 540 635 563
DN100
L
MDE
F
DN
ON
P
280
340
140
220
17119
50420500
A
C
B
DN100
Q
R
DN
100
I
H1
G
J
Ø K
H2
G
R
S
DN
100
79As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STS 80/100
Pump Curves
Subm
ersi
ble
pum
ps
STS 80 F
4-pole, 50 Hz
1 = STS 80 F 7.110/20 2 = STS 80 F 9.120 /24 3 = STS 80 F 10.120/27 4 = STS 80 F 12.120/32 5 = STS 80 F 14.100/40
All pump curves shown are based on a density of ρ = 1 kg/dm3
I = Q min
X = Q optimal
Recommended:
Q optimal +10% / -20%
Wilo-Drain STS 80/100Pump Curves
STS 100 F
4-pole, 50 Hz
1 = STS 100 F 10.170/59 2 = STS 100 F 12.170/72 3 = STS 100 F 15.170/84 All pump curves shown are based on a density of ρ = 1 kg/dm3
I = Q min
X = Q optimal
Recommended:
Q optimal +10% / -20%
xxx
x
x
Q
Q
[lgpm]
H
000 5 10
0 100 200 300
15 20 25 30
2
4
6
8
0
1
2
3
4
10
12
14
[l/s]
[m3/h]
Wilo-Drain STS 80 F
20 40 60 80 100
0 [m3/h]20 40 60 80 100
4
3
5
2
1
4 3
5
2 1
[m]
P 2[W]
xxx
Q
Q
H
00
2
4
6
8
0
2
4
6
8
10
10
12
14
16
18
20
22
[m3/h]
[lgpm]0 10 20 30 40 50
1000 200 300 400 500 600
[l/s]20 40 60 80 100 120 140 160
0 [m3/h]20 40 60 80 100 120 140 160
3
2
1
3
2
1
Wilo-Drain STS 100F
[m]
P 2[W]
80 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STS 80/100
Terminal Diagrams
Terminal diagram Wilo-Drain STS 80
3~400 V, 50 Hz
Terminal diagram Wilo-Drain STS 100
3~400 V, 50 HzTerminal Diagrams
Terminal U1 V1 W1 WSK WSK PE
Wire No. 1 2 3 4 5 green/yellow
Terminal U1 V1 W1 V2 W2 U2 WSK WSK PE
Wire No. 1 2 3 4 5 6 7 8 0
81As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STS 80/100
Dimension Drawings, Dimensions
Subm
ersi
ble
pum
ps
Dimensions
Dimension drawings STS 80 Dimension Drawings, Dimensions
Stationary wet sump installation
Portable wet sump installation
Wilo-Drain STS 80[mm]
DN1 DN2 A B C D E F G H I J K
80 80 200 160 19 146 81 228 660 300 70 185 355
L M a b c d e k H1H N O T
180 315 200 170 170 220 14 14 635 85 200 409
2 x Ø 42,4 x 3,25)
DIN 2440
A
C
BDN2
J
615
(550
- 7
50)
Fd
k e
E
52ba
c
k
FED
300 325
Ø 1200 Ø 1500
Ø 650 700 x 1200
M H
GI
DN1
L
9060
144015
85
12
+
+
+
min
T
DN1
DN2
KH
1 GN
O
300
380,5
230,5
Ø 195
80
82 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STS 80/100
Dimension Drawings, Dimensions
Dimensions
Dimension drawings STS 100
Stationary wet sump installation
Portable wet sump installation
Wilo-Drain STS 100[mm]
DN1 DN2 A B C D E F G H I J K
100 100 220 180 18 169 91 255 825 780 90 195 440
L M a b c d e k H1 N O T
225 400 260 220 220 250 15 20 890 90 250 450
*
80
1DN
2 x 1,5" (Ø 47,8 x 3,25)
DIN 2440
A
C
B
DN2
J
615
(550
- 7
50)
Fd
k e
E
k
Ø 650 700 x 1200
DN1
8860
1440
Ø 1200 Ø 1500
M
H
GI
L85 Ø 12
68ba
c
FE
D300325
+
+
+
min
T
DN1
DN2
KH
1 GN
O
337,
5
428260
Ø 220
90
83As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 80, TP 100, TP 150
Pump Curves
Subm
ersi
ble
pum
ps
TP 80 EWilo-Drain TP 80, TP 100, TP 150 Pump Curves
4-pole, 50 Hz
1 = TP 80 E 160/14 2 = TP 80 E 170/18 3 = TP 80 E 190/26 4 = TP 80 E 210/34 5 = TP 80 E 230/34
All pump curves shown are based on a density of ρ = 1 kg/dm3
I = Q min
X = Q optimal
Recommended: Q optimal +10% / -20%
TP 80 F
4-pole, 50 Hz
1 = TP 80 F 155/202 = TP 80 F 165/243 = TP 80 F 180/274 = TP 80 F 190/325 = TP 80 F 210/34
All pump curves shown are based on a density of ρ = 1 kg/dm3
I = Q min
X = Q optimal
Recommended: Q optimal +10% / -20%
Q
Q
H
00
0 10 20 30 40
2
4
6
8
0
1
2
3
4
10
12
14
16
[l/s]
[m3/h]20 40 60 80 100 120 140
0 [m3/h]20 40 60 80 100 120 140
Wilo-Drain TP 80 E
4
3
5
2 1
4
3
5
2 1P 2[W
]
[m]
xxx
x
x
Q
Q
[lgpm]
H
000 5 10
0 100 200 300
15 20 25 30
2
4
6
8
0
1
2
3
4
10
12
14
[l/s]
[m3/h]
Wilo-Drain TP 80 F
20 40 60 80 100
0 [m3/h]20 40 60 80 100
4
3
5
2
1
4 3
5
2 1
P 2[W]
[m]
84 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 80, TP 100, TP 150
Pump Curves
TP 100 E
4-pole, 50 Hz
1 = TP 100 E 160/14 2 = TP 100 E 180/22 3 = TP 100 E 210/30 4 = TP 100 E 230/34
All pump curves shown are based on a density of ρ = 1 kg/dm3
I = Q min
X = Q optimal
Recommended: Q optimal +10% / -20%
TP 100 E
4-pole, 50 Hz
5 = TP 100 E 190/39 6 = TP 100 E 210/52 7 = TP 100 E 230/70 8 = TP 100 E 250/84
All pump curves shown are based on a density of ρ = 1 kg/dm3
I = Q min
X = Q optimal
Recommended: Q optimal +10% / -20%
x
xx
x
Q
Q
H
000 10 20 30
2
4
6
8
0
1
2
3
4
10
12
14
16
[l/s]
[m3/h]20 40 60 80 100
0 [m3/h]20 40 60 80 100
Wilo-Drain TP 100 E
1
4
3
2
1
4
3
2
P 2[W]
[m]
Q
Q
000 10 20 30 40 50
4
8
2
4
6
8
12
16
20
[l/s]
[m3/h]40 80 120 160
0 [m3/h]40 80 120 160
Wilo-Drain TP 100 E
xx
xx
5
8
7
6
5
8
7
6
[m]
P 2[W]
H
85As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 80, TP 100, TP 150
Pump Curves
Subm
ersi
ble
pum
ps
TP 100 F
4-pole, 50 Hz
9 = TP 100 F 155/18 10 = TP 100 F 165/22 11 = TP 100 F 180/25 12 = TP 100 F 180/31 13 = TP 100 F 210/34
All pump curves shown are based on a density of ρ = 1 kg/dm3
I = Q min
X = Q optimal
Recommended: Q optimal +10% / -20%
TP 100 F
4-pole, 50 Hz
14 = TP 100 F 195/59 15 = TP 100 F 220/72 16 = TP 100 F 247/84
All pump curves shown are based on a density of ρ = 1 kg/dm3
I = Q min
X = Q optimal
Recommended: Q optimal +10% / -20%
Q
Q
[lgpm]
H
000 5 10
0 100 200 300 400
15 20 25 30 35
2
4
6
8
0
1
2
3
4
10
12
14
[l/s]
[m3/h]
xx
xxx
Wilo-Drain TP 100F
20 40 60 80 100 120
0 [m3/h]20 40 60 80 100 120
13
121110
9
1312
11
10 9P 2[W
]
[m]
xxx
Q
Q
H
00
2
4
6
8
0
2
4
6
8
10
10
12
14
16
18
20
22
[m3/h]
[lgpm]0 10 20 30 40 50
1000 200 300 400 500 600
[l/s]20 40 60 80 100 120 140 160
0 [m3/h]20 40 60 80 100 120 140 160
16
15
14
16
15
14
Wilo-Drain TP 100F
P 2[W]
[m]
86 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 80, TP 100, TP 150
Pump Curves
TP 150 M
4-pole, 50 Hz
1 = TP 150 M 235/1302 = TP 150 M 250/1653 = TP 150 M 265/200
All pump curves shown are based on a density of ρ = 1 kg/dm3
I = Q min
X = Q optimal
Recommended: Q optimal +10% / -20%
TP 150 E
4-pole, 50 Hz
4 = TP 150 E 280/1105 = TP 150 E 295/150
All pump curves shown are based on a density of ρ = 1 kg/dm3
I = Q min
X = Q optimal
Recommended: Q optimal +10% / -20%
Q
Q
H
00
4
8
5
20
10
15
12
16
20
24
[m3/h]
0 10 20 30 40 50 60 70 80 90 100 [l/s]80 160 240 320
0 [m3/h]80 160 240 320
xx
x
Wilo-Drain TP 150M
3 2 1
3
2
1
[m]
P 2[W]
xx
Q
Q
H
00
4
8
0
5
20
10
15
12
16
20
24
28
[m3/h]
0 10 20 30 40 50 60 70 80 90 100 110 [l/s]80 160 240 320
0 [m3/h]80 160 240 320
Wilo-Drain TP 150E
5 4
5
4
P 2[W]
[m]
87As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 80, TP 100, TP 150
Terminal Diagrams
Subm
ersi
ble
pum
ps
Terminal diagram Wilo-Drain TP 80 and TP 100 ( ≤ P2 = 3.5 kW)
3~400 V, 50 Hz
Terminal diagram Wilo-Drain TP 100 ( > P2 = 3.5 kW)
3~400 V, 50 Hz
Terminal diagram Wilo-Drain TP 150
3~400 V, 50 HzTerminal Diagrams
Terminal U1 V1 W1 WSK WSK/PE DI PE
Wire No. 1 2 3 4 5 6 green/yellow
Terminal U1 V1 W1 V2 W2 U2 WSK WSK/PE DI PE
Wire No. 1 2 3 4 5 6 7 8 9 0
Terminal U1 V1 W1 V2 W2 U2 PE WSK WSK/PE DI – –
Wire No. 1 2 3 4 5 6 0 1 2 3 4 5
88 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 80, TP 100, TP 150
Dimension Drawings, Dimensions
Dimensions
Dimension drawings TP 80
Stationary wet sump installation
Dimension Drawings, Dimensions
Portable wet sump installation Vertical dry sump installation
Wilo-Drain TP 80[mm]
DN1 DN2 A B C D E F G H I J K L M a b c d e k
TP 80 F 80 80 200 160 19 146 81 228 725 300 80 200 428 185 315 200 170 170 220 14 14
TP 80 E 100 80 200 160 19 146 81 228 725 300 80 200 428 185 315 200 170 170 220 14 14
2 x Ø 42,4 x 3,25DIN 2440
A
C
BDN2
J
615
(550
- 7
50)
F
FED300 325
Ø 1200 Ø 1500
Ø 650 700 x 1200
d
k
M H
GI
DN1
DN1
L90
60
144015
e
E
52
85
12
ba
c
k
+
+
+
V
NG
H
O
T
U
DN
DN
1
2
1
P
min
S
G
Q>8
5
R 494
225
264
225
f
h
89As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 80, TP 100, TP 150
Dimension Drawings, Dimensions
Subm
ersi
ble
pum
ps
Dimensions
Dimension drawings TP 100
Stationary wet sump installation
Portable wet sump installation Vertical dry sump installation
Wilo-Drain TP 100 ... Dimensions
A B C D E F G H I J K L M a b c d e k
[mm]
E160/14, E180/22, E210/30, E230/34, F155/18, F165/22,F180/25, F180/31, F210/34
220 180 18 168 91 228 725 340 100 200 428 225 400 340 300 210 203 16 20
E190/39, E210/52, E230/70, E250/84F195/59, F220/72, F247/84
220 180 18 168 91 255 745 350 100 223 460 225 400 340 300 210 203 16 20
2 x 1,5" (Ø 47,8 x 3,25)
DIN 2440
E
a b c
14
110
1DN68
J
615
(550
- 7
50)
F
FED300325
Ø 1200 Ø 1500
Ø 650 700 x 1200d
k
A
C
M
H
GI
DN1
L
B
DN2
88
70
40
80
e
Ø 12
k
+
+
+
NG
H
O
T
U
DN
DN
1
2
1
P
min
S
G
Q>8
5
R 494
225
264
225
f
h
90 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 80, TP 100, TP 150
Dimension Drawings, Dimensions
Dimensions
Dimension drawings TP 150
Stationary wet sump installation
Portable wet sump installation Vertical dry sump installation
Wilo-Drain TP 150[mm]
DN1 DN2 A B C D E F G H I J K L M a b c d e k
150 150 285 240 22 237 100.5 320 932 415 100 250 536 265 510 320 280 280 335 11 20
2 x 1,5" (Ø 47,8 x 3,25)
DIN 2440
+
+
+
J
920
(800
- 9
50)
F
FED400 500
Ø 1500 Ø 2000
Ø 900 900 x 1600
d
k
A
C
M
H
GI
DN1
L
BDN2
120
70
40
80
e
E
85
85
12
ba
c
k
DN 1
NG
H
O
T
U
DN
1
2
DN 1 P
min
S
G
Q>8
5
R
819
381
414
381
f
h
91As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Mechanical Accessories
Subm
ersi
ble
pum
ps
Stationary wet sump installation Wilo-Drain STC 80/100, STS 80/100, TP 80-150Mechanical Accessories
STS 80/100, TP 80/100
For STC 80/100 see dimension drawing of pump
TP 150
STS, TP: Base elbow (Item 1a) Made of cast iron 25 (EN-GJL-250) including pump support, profile seal, accessories for mount-ing and fastening to the ground, and guide pipe bracket, cast iron 25 (EN-GJL-250), flanges PN 10/16 to DIN 2501 for DN 80/100.
Guide pipe (2 x 1.5") must be provided on-site
STS/TP 80 STS/TP 100A 300 400 B 303.4 339C 180 225D 105 110E 110 130F Ø 40 Ø 48G 225 250H 210.5 238I 118.5 132
or Item 1bStainless steel pump support, profile seal, accesso-ries for installation and fastening to the ground, and stainless steel cable guide 10 m for 5 m instal-lation depth, flanges PN 10/16, to DIN 2501Made of stainless steel, as for item 1a, but with stainless steel cable guide for 5 m installation depth.
TP 80 TP 100/150H 180 240 I 345 385 J 185 215K 217 350 L 232 250M 211 246N 95 95 O 182 182 P 109 129
Stainless steel pump support, profile seal, accesso-ries for installation and fastening to the ground, and stainless steel cable guide 10 m for 5 m instal-lation depth, flanges PN 10/16, to DIN 2501.
Made of cast iron 25 (EN-GJL-250), including pump support, profile seal, and accessories for installation and fastening to the ground. The dou-ble pipe guide (R 2) must be provided on-site.
5
4
3
2
6
7
1
5
4
3
2
6
1
Ø F
IG
B
H
A
C
E
D
Item 1a
H
J
OI
K
M
L P
N
Item 1b18
2
210
290
340
263
501
316
346
94
Item 1a
240
215
182
38,5
0
350
246
250
129
95
Item 1b
92 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Mechanical Accessories
STC 80/100, STS 80/100, TP 80/100
TP 150
Chain (Item 6)Made of stainless steel, including shackles, length: 5 m and 10 m, lifting capacity: 400kg
Check valve body (Item 2)Made of cast iron 25, (EN-GJL-250), with unre-stricted passage, incl. cleaning port and ventilation device, installation accessories, flanges PN 10/16, to DIN 2501, with(*) or without draw. No. (draw. No. 53.4-309) DN 80/100/150
DN 80 DN 100 DN 150Q 240 270 335R 245 282 397 S 260 300 400
Gate valve (Item 3)Made of cast iron 25, (EN-GJL-250) installation accessories, flanges PN 10/16 to DIN 2501, DN 80/100/150
DN 80 DN 100 DN 150T 295 325 425U 80 190 210
Pipe bend (Item 4)Made of nodular graphite iron (EN-GJS-400-15), with 2 flanges, installation accessories for a flange connection, flanges PN 10/16, DIN 28637, DN 80/100/150
DN 80 DN 100 DN 150V 165 180 220W 165 180 220
Y-piece (Item 8)Made of galvanised steel 37, with 2 sets of instal-lation accessories, flanges PN 10/16, DIN 2501, DN 80/80/80, 100/100/100 or 150/150/150
DN 80 DN 100 DN 150X 615 615 920Y 168 208 287Z 167 207 287
STS/TP 80/100 pipe joint (Item 7)Made of galvanised steel, fits 2" guide pipe, required for guide pipes longer than 6 m
Installation accessories (Item 5)For a flange connection with 8 screws and nuts and 1 flat seal, for flanges PN 10/16, DIN 2501
Stationary wet sump installation Wilo-Drain STC 80/100, STS 80/100, TP 80-150Mechanical Accessories
5
4
3
2
6
7
1
5
4
3
2
6
1
Q*
S
R
T
U
V
W
Z
X
Y
Ø 5
2
130
60
93As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain STC 80/100, STS 80/100, TP 80-150
Mechanical Accessories
Subm
ersi
ble
pum
ps
Portable wet sump installation
STS 80/100, TP 80/100
For STC 80/100 see dimension drawing of pump
TP 150
TP 80/100 ground support foot (Item 9) Made of stainless steel, consists of 3 support feet, 1 base plate and mounting hardware
STS 80 (Item 9a)STS 100 (Item 9b)Consists of 3 support feet, 1 base plate and mounting hardware
TP 150 ground support foot (Item 9)Made of stainless steel, consists of 3 supportfeet, 1 base plate and mounting hardware
Chain (Item 6)Made of stainless steel, including shackles, length: 5 m and 10 m, lifting capacity: 400kg
Pipe bend (Item 10)Made of stainless steel, can be used for direct hose connection or mounting a Storz fixed coupling. Variable set-up possible with 45° hole pitch (TP 100/150)
DN 80 DN 100 DN 150A G 3 G 4 Ø 148B 240 280 432.5C Ø 89 – –
Storz fixed coupling for mounting to pipe bend (Item 13)AL, with R3 or R4 female thread for connection nominal diameter 80/100
DN 80 DN 100D 40 48 E Ø 78 Ø 100F 105 133G R 3 R 4
Storz hose coupling (Item 14)Made of aluminium, for hose inner dia. 90/110 mm
DN 80 DN 100H 140 170 I 105 133J Ø 80 Ø 100K Ø 90 Ø 110
Pressure hose for direct hose connection (Item 15)Material: Synthetic material PN 8 including 2 hose clips, hose inner diameter 90/110/150 mm, length 10, 20 and 30 m
14
13
10
6
15
9
6
15
9
10
359
490
590
30
130
300
380,5
230,5
Ø 195
80
337,
5
428260
Ø 220
90
Item 9a Item 9b
560
441
12530
A
B
C
F
E
D
G
K
H
JI
can be wound up
94 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain TP 80, TP 100, TP 150
Mechanical Accessories
Stationary, vertical dry sump installation TP 80-150 Wilo-Drain TP 80, TP 100, TP 150Mechanical Accessories
Set-up set (Item 17)Includes mounting hardware and 2 flange connec-tions (inlet and discharge ends).
TP 80 TP 100 TP 150A 225 272 381B 264 337 414C 494 625 819
Check valve body (Item 2)Made of cast iron 25, (EN-GJL-250), with unre-stricted passage, incl. cleaning port and ventilation device, installation accessories, flanges PN 10/16, to DIN 2501, with or without draw. No. (draw. No. 53.4-309) DN 80/100/150
TP 80 TP 100 TP 150Q 240 270 335R 245 282 397S 260 300 400
Gate valve (Item 3)Made of cast iron 25, (EN-GJL-250) installation accessories, flanges PN 10/16 to DIN 2501, DN 80/100/150
TP 80 TP 100 TP 150T 325/295* 325 425U 190/180* 190 210* Inlet DN 100/discharge side DN 80
Expansion joint (Item 18)Galvanised steel, PN 10/16, with installation accessories DN 80/100/150
TP 80 TP 100 TP 150D 135/130* 135 180* Inlet DN 100/discharge side DN 80
Y-piece (Item 8)Made of galvanised steel 37, with 2 sets of instal-lation accessories, flanges PN 10/16, DIN 2501, DN 80/80/80, 100/100/100 or 150/150/150
TP 80 TP 100 TP 150X 615 615 920Y 68 208 287Z 167 207 287
min
2
18
17
17
183
A
A
C
B
Q*
S
R
T
U
D
Z
X
Y
95As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain Electrical Accessories
Pump Equipment/Function
Subm
ersi
ble
pum
ps
• = available, – = not available 1) For other motor power ratings upon request 2) For direct activation units only (up to 4 kW) 3) In potentially explosive areas only with Ex isolating relay 4) In potentially explosive areas only with Zener barrier
Wilo-Drain Electrical Accessories Pump Equipment/Function
ER1-A SK 530 Drain Control PL1
Drain Control PL2
Drain Control 1
Drain Control 2
KAS
ApplicationsSwitchgear for controlling pumps • • • • • • –
Alarm switchgear – – – – – – •
Number of pumps to be controlled 1 2 1 2 1 2 –
Electrical connectionDirect activation [A] max.101) max. 2x8 Max.12 max. 2x12 Max.10 max. 2x10 –
Star/delta connection optional1) – – – > 10 A > 10 A –
DesignMicroprocessor-controlled – – • • • • –
Electronic • • – – – – •
Housing materialPlastic • • • • • • •
Metal optional – – – – – –
EquipmentTest run • – • • – – –
Pump start counter/impulse counter – – • • – – –
LCD display – – • • • • –
LED/indicator lamp • • • • • • –
Main switch • – optional optional • • –
Ampere meter optional upon requ. – • • • 2) • 2) –
Volt meter optional upon requ. – – – – – –
Adjustable delay time • – • • • • –
Operating hours counter optional upon requ. – • • • • –
Level detection Float switch • 3) • 3) • 3) • 3) • 3) • 3) –
Pneumatic pressure sensor – – • • – – –
Level sensor (4-20 mA) – – • 4) • 4) • 4) • 4) –
Electrodes – – – – – – •
Alarm Mains-operated • • • • • • –
Built-in (buzzer) – – • • – – •
Pump Duty Cycling – • – • – • –
Message/display functionCollective run signal • • – – – – –
Collective fault signal • • • • • • –
Individual run signal – optional – – • • –
Individual fault signal – optional – • – – –
Control functions (motor monitor)Thermal winding contacts (WSK) • • • • • • –
PTC • – – – • • –
Leakage (DI) – – – – • • –
Electronic • • • • • (up to 10 A)
• (up to 10 A) –
Protective motor switch – – optional optional•
(>10 A)•
(>10 A) –
Scope of deliveryFloat switch • • – – – – –
Signal horn • • – – – – –
96 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain Electrical Accessories
Pump Equipment/Function
• = available, – = not available
Drain-Alarm2
Motor pro-tection
plug CEE
Isolation relay for
explosion protection
Zenerbarrier
Flashing light
Signal horn SK 545
Applications
Switchgear for controlling pumps – • – – – – –
Alarm switchgear • – – – – – –
Number of pumps to be controlled – 1 – – – – 2
Electrical connection
Direct activation – • – – – – –
External power pack
Star/delta connection – – – – – – –
External power pack
Design
Electronic • – • • • – •
Electromechanical – • – – – • –
Housing material
Plastic • • • • • • •
Equipment
LED/indicator lamp • • • – – – •
Level detection Float switch • • • – – – –
Level sensor (4-20 mA) – – – • – – –
Alarm Battery-operated • – – – – – –
Mains-operated • – – – – – –
Built-in (buzzer) • – – – – – –
Message/display function
Individual fault signal • – – – – – –
Control functions (motor monitor)
Thermal winding contacts (WSK) – • – – – – •
Leakage (DI) – – – – – – •
Protective motor switch – • – – – – –
97As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain Electrical Accessories
Description of Accessories
Subm
ersi
ble
pum
ps
Description of Accessories Wilo ER 1-A and Wilo SK 530 switchgearsFor automatic transmitter control of 1 or 2 Wilo-Drain series submersible wastewater/sewage pumps.
– W=228 mm, H=265 mm, D=74 mm– Protection class IP 42– Switchover from pump 1 – pump 2 (SK 530)– Motor protection by WSK or electronic motor switch– Transmitter connection for float switch, Type WA 95– Automatic pump duty cycling (SK 530)– Selector switches:
"Hand-2-Hand-1-0-Automatic" system (SK 530)"Hand-0-Automatic" system (ER 1-A)
– Connection for high water alarm– Volt-free fault signal (changeover contact) and volt-free run signal (changeover contact), – Phase failure monitor (can be switched off) – Includes float switch WA 65, cable length 5 m (2x for ER 1-A, 3x for SK 530) and 230 V signal horn
(requires external power supply), included separately in deliveryFor control of pumps in potentially explosive areas, Ex isolating relays must be used.
Switchgears are not explosion-protected and may be used outside of potentially explosive areas only.
Wilo-DrainControlMicroprocessor-controlled switch unit for the fully automatic control of 1 or 2 Wilo-Drain submersible wastewater/sewage pumps.
• Hand-0-Automatic switch above membrane keyboard • Two-line LCD display with 2 x 16 characters, multi-lingual,
menu-controlled operation possible using membrane keyboard • Input terminals for connecting a level probe • Automatic phase failure and phase sequence control • Operating hours counter • Automatic pump duty cycling (Control 2) after each operation sequence • Volt-free contacts for:
– Collective fault signal– Signal horn (make contact)– Pump 1 operation (make contact)– Pump 2 operation (make contact) Control 2 only– Main switch– Built-in electronic motor current monitoring
• max. ambient temperature 40 °C • Housing: Plastic for wall installation • Type of start-up: Direct or star-delta
For control of pumps in potentially explosive areas, a level probe (with Zener barrier!) or float switch in con-junction with Ex isolating relays must be used.
Switchgears are not explosion-protected and may be used outside of potentially explosive areas only.
Wilo-DrainControl PL 1 Switchgear for level control of 1 submersible pump using the bubbling-through or dynamic pressure method.
• LCD display• LEDs for alarm, operation/delay time, manual/automatic operation• Volt-free contacts for collective fault signal and high water alarm• Forced switch-on of the pump• Time-delayed pump stop• Built-in buzzer• Operating hours counter
Switchgears are not explosion-protected and may be used outside of potentially explosive areas only.
1P
2OKP
. Drain . Control
PS1-LCDNiveau Control
98 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain Electrical Accessories
Description of Accessories
Wilo-DrainControl PL 2Switchgear for level control of 2 submersible pumps. The level can be detected using the bubbling-through or dynamic pressure method or using an electronic level sensor(4 - 20 mA) or float switch.• LCD display, multi-lingual, adjustable• LEDs for alarm, operation/delay time, manual/automatic operation• Volt-free contacts for collective fault signal and high water alarm, pump 1 fault,
pump 2 fault• Forced switch-on of the pump• Time-delayed pump stop• Automatic pump duty cycling after each operation sequence• Automatic fault switchover• Built-in buzzer• Operating hours, pump start countersFor control of pumps in potentially explosive areas, a level probe with Zener barrier or float switch in con-junction with Ex isolating relays must be used.
Switchgears are not explosion-protected and may be used outside of potentially explosive areas only.
Wilo KASMini alarm switchgear with 70 dBA signal bell, signal transmitter (electrode) with 3 m cable, self-recharging power supply pack (power reserve approx. 5 hrs.) in ISO plug housing (Schuko), protection class IP 30, 230 V~ / 9V=; 1.5 VA.
Wilo Drain-Alarm 2Alarm switchgear for wall installation with visual and acoustic alarm signal(85 dBA buzzer, self-recharging power supply pack, volt-free contact, ISO housing, protective class IP 54, 1~230 V. As the transmitter, a WA typefloat switch is required.
Protective motor switch CEE(Up to rated motor power P2 < 4 kW) with phase inverter and rotation direction indicator, thermal motor protection of the motor. Current ranges:• 2.6 – 3.7 A• 3.7 – 5.5 A• 5.5 – 8 A• 8 – 11.5 AFor TP 80/TP 100, evaluation of the thermal motor protection and leak monitoring.
Level probeFor level detection.• Protection class IP 68• Measurement range 0 - 1 m WS; 0 - 2.5 m WS• Cable lengths 10, 30 or 50 m• Output signal 4 - 20 mA
Wilo . Drain . Control
1 2
DrainAlarm 2
99As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain Electrical Accessories
Description of Accessories
Subm
ersi
ble
pum
ps
Float switch MS1Cable length 10 m, for sewage containing faeces, for connection to a Wilo-DrainControl 1 or 2.
Type WA Float SwitchCable length 5 m, switch setting: high ON/low OFFWA 65 for media up to 65 °CWA 95 for media up to 95 °C
Ex isolating relayFor installation of float switches in potentially explosive areas. Suitable for connection of 3 – 5 float switches. Built into an ISO housing, protection class IP 54, with transparent cover, for wall mounting (W = 182 mm, H = 180 mm, D = 165 mm). • 3-circuit (3 float switches can be connected)• 4-circuit (4 float switches can be connected)• 5-circuit (5 float switches can be connected)
Zener barrierFor installation of a level probe in potentially explosive areas.Suitable for connection of a level sensor.Protection class IP40, housing for installation in non-potentially explosive areas (W = 75 mm, H = 150 mm, D = 106 mm).1 m pre-attached cable.
Switch cabinet - outdoor installation of Wilo-Drain-SystemEmpty cabinet for outdoor installation, with glass fibre-reinforced polyester, with lock, air supply and exhaust. For pedestal mounting. Additional options such as ammeter, volt meter, heating, etc. feasible on request and can, if required and in conjunction with a Wilo-Drain-Control, be supplied assembled in the switch board (at extra costs).(W = 590 mm, D = 320 mm, H = 875 mm)
Flashing lightFor installation on control cabinet, outdoor installation, 230 VAC
1 2
N L 3 4 5 6 7 8
100 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-Drain Electrical Accessories
Description of Accessories
Signal hornFor connecting to a Wilo-DrainControl, 230 VAC
Dynamic pressure systemThe pressure sensor (bell) senses changes of the fluid level in the shaft. The change of the pressure value in the bell is transmitted to the Wilo-DrainControl PL via a leak-proof hose, and evaluated by measuring ele-ments in the switch box.Scope of delivery: Submersible bell wit 10 m hose
Bubble-through systemDynamic pressure principle with permanent compressed air supply from the mini air compressor. The bell (dynamic pressure system) must be ordered separately.Scope of delivery: Mini air compressor, 3 m hose with T-piece and non-return valve
Wilo-SK 545Trigger device for monitoring of up to 2 Wilo TP 80,100 or 150 submersible pumps• For installation into existing switchgear or as a module for conventionally designed
switchgears, installation on 35 mm top hat rail• Phase sequence monitoring• 2-stage leak monitoring• Thermal winding monitoring (WSK)• Operating voltage 3~400 V max. 6 A fuse protection• Volt-free output contacts, max. load 250 V/1 A• Dimensions : H = 72mm, W = 100mm, D = 113mm
101As of: 06/2004 - Subject to change without prior notice
Sewage/Faeces
Subm
ersi
ble
pum
ps
102 As of: 06/2004 - Subject to change without prior notice
ContentsLifting plants/Wet sump pumping stations
Lifting plants
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104Product Advantages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Condensate/Wastewater/Drainage Water. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Wilo-DrainLift Con . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Pump Equipment/Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Pump Curve, Dimension Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111Wilo-DrainLift TMP, Wilo-DrainLift Box, FH/D-FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112Pump Equipment/Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Wilo-DrainLift TMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117Pump Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117Dimension Drawings, Installation Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Wilo-DrainLift Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Pump Curves, Dimension Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Wilo-DrainLift FH/ D-FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Pump Curves, Dimension Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Sewage/Faeces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Wilo-DrainLift KH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Pump Equipment/Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Wilo-DrainLift KH 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Pump Curve, Dimension Drawing, Installation Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Wilo-DrainLift S, M, L, XL, XXL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Pump Equipment/Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Wilo-DrainLift S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Pump Curve, Dimension Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Installation Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Mechanical Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133Wilo-DrainLift M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134Pump Curve, Dimension Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134Dimension Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135Wilo-DrainLift L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Pump Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Dimension Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Installation Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139Wilo-DrainLift XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140Pump Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140Dimension Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141Installation Example, Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142Wilo-DrainLift S, M, L, XL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142Wilo-DrainLift XXL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144Pump Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144Dimension Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144Dimension Drawings, Maße . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145Installation Example, Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
103As of: 06/2004 - Subject to change without prior notice
ContentsLifting plants/Wet sump pumping stations
Lift
ing
plan
ts/w
et su
mp
pum
ping
st
atio
ns
Wet sump pumping stations
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148Product Advantages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Wilo-DrainLift WS, WB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150Wilo-DrainLift WS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Pump Curve, Dimension Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Mechanical Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154Wilo-DrainLift WB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155Pump Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155Dimension Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156Mechanical Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
104 As of: 06/2004 - Subject to change without prior notice
Lifting PlantsProduct Overview
Wilo-DrainLift Lifting Plants
Wilo-DrainLift Con Duty chart (2-pole, 50 Hz)
• Condensate lifting plants• Applications:
Removal of condensate, can be used in– Condensing boiler applications – Air conditioning and refrigeration sys-
tems (such as refrigerators and evap-orators)
Lifting Plants Wilo-DrainLift Lifting Plants Product Overview
Wilo-DrainLift TMP Duty chart (2-pole, 50 Hz)
• Wastewater lifting plant (above-floor installation)
• Applications: Automatic drainage for showers, wash-stands, washing machines and dishwash-ers etc.Pumping rain, wastewater and drainage water which does not contain faeces, fibrous materials, oils or fatty wastes.
Wilo-DrainLiftBox Duty chart (2-pole, 50 Hz)
• Wastewater lifting plant• Applications:
For underground installation, can be used in– Areas at risk of flooding– Garage entrances– Basement hatchways
Wilo-DrainLift FH/D-FH Duty chart (2-pole, 50 Hz)
• Wastewater lifting plant• Applications:
Removal of water which does not contain faeces, can be used in– Underground car parks– Pubs and inns– Commercial buildings
Wilo-DrainLift KH 32 Duty chart (2-pole, 50 Hz)
• Mini Sewage Lifting Plant• Applications:
For limited use (directly connected behind a toilet) with macerator for dis-posal of wastewater from one toilet together with one hand washing stand, one shower, or one bidet.
0 50 100 150 200 250 3000
1
2
3
4
5
H[m
]
Wilo-DrainLift Con
Q [l/h]
0 0 1 2 3 4 5 6 7 8
1
2
3
4
5
6
7
H[m
]
Wilo-Drain TMP
Q[m3/h]
0 2 4 6 8 10 12 140
2
4
6
8
10
H[m
]
Wilo-DrainLift Box
Q [m3/h]
0 5 15 2510 20
Wilo-Drain FH/D-FH
0
2
4
6
8
10
H[m
]
Q[m3/h]
Q[m3/h]0 1 2 3
H[m
]
0
2
3
4
1
Wilo-DrainLiftKH 32-0,4
105As of: 06/2004 - Subject to change without prior notice
Lifting PlantsProduct Advantages
Wilo-DrainLift Lifting Plants
Lift
ing
plan
ts
Wilo-DrainLift Con
• Low-noise operation• 2 inlet openings• Standard alarm contact• Easy to install• Variable inlets/discharges
Product Advantages
Wilo-DrainLift TMP
• Modern design• Shower drain possible from heights of 110 mm• Low-noise operation via integrated submersible pump
Wilo-DrainLiftBox
• Easy to install due to built-in pump and non-return valve• Large tank volume• Easy to maintain• Removable pumps with pressure line
Wilo-DrainLift FH/DFH
• Increased reliability with:– Large collector tank– Large free ball passage
• Switchgear with collective fault signal and battery-powered alarm
Wilo-DrainLift KH 32
• Modern, compact design• Straightforward installation with self-sealing, direct toilet connection
106 As of: 06/2004 - Subject to change without prior notice
Lifting PlantsProduct Overview
Wilo-DrainLift Lifting Plants
Wilo-DrainLift S Duty chart (4-pole, 50 Hz)
• Sewage lifting plant• Applications:
Suitable for handling untreated sewage which cannot be drained by natural gravity flow to the sewer system. Single room drainage.
Wilo-DrainLift M Duty chart (4-pole, 50 Hz)
• Sewage lifting plant• Applications:
Suitable for handling untreated sewage which cannot be drained by natural gravity flow to the sewer system. For drainage of single-family homes and small building complexes.
Wilo-DrainLift L Duty chart (2-pole, 50 Hz)
• Sewage lifting plant• Applications:
Suitable for handling untreated sewage that cannot be drained by natural grav-ity flow to the sewer system.For drainage of multifamily houses and small facilities (cafés etc.).
Wilo-DrainLift XL Duty chart (2-pole, 50 Hz)
• Sewage lifting plant• Applications:
Suitable for handling untreated sewage that cannot be drained by natural grav-ity flow to the sewer system.For drainage of large facilities (pubs, stores etc.)
Wilo-DrainLift XXL Duty chart (4-pole, 50 Hz)
• Sewage lifting plant• Applications:
Suitable for handling untreated sewage that cannot be drained by natural grav-ity flow to the sewer system.For drainage of building complexes (hotels, hospitals etc.)
Product Overview
0 10 20 30 40 500
2
4
6
H[m
]
1/71/5
Wilo-DrainLift S
Q[m3/h]H
[m]
10 20 30 4000
2
4
6
Wilo-DrainLift M
Q[m3/h]
0 10 20 30 40 500
5
10
15
20
H[m
]
Wilo-DrainLift L
Q [m3/h]
0 10 20 30 40 500
5
10
15
20
H[m
]
Wilo-DrainLift XL
Q[m3/h]
Q [m3/h]0 40 80 120 160
H [m
]
0
4
12
16
8
Wilo-DrainLift XXL
107As of: 06/2004 - Subject to change without prior notice
Lifting PlantsProduct Advantages
Wilo-DrainLift Lifting Plants
Lift
ing
plan
ts
Wilo-DrainLift S
• Freely selectable inlets• Wall cavity installation possible• Lightweight• Compact installation
Wilo-DrainLift M
• Freely selectable inlets• Lightweight• Battery-operated alarm• Built-in non-return valve• Large tank volume
Wilo-DrainLift L
• Freely selectable inlets• Lightweight• Battery-operated alarm• Built-in non-return valve• Large tank volume• Wide range of performance levels
Wilo-DrainLift XL
• Large tank volume• Battery-operated alarm• Only one discharge outlet (built-in breeches pipe)• Built-in non-return valve• Suitable for continuous operation
Wilo-DrainLift XXL
• Large tank volume• Lightweight• Wide range of performance levels• Suitable for continuous operation
Product Advantages
108 As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift Con
Product Description
Wilo-DrainLift ConAutomatic condensate lifting plant
Type keyExample: Wilo-DrainLift Con
Con Condensate
ApplicationsThe condensate lifting plant must be used if disposal is not possible via natural gravity flow, or if the installation location is below the backflow level. It has been designed for installation in condensing boilers that generate aggressive condensate according to the speci-fications of the "Arbeitsblatt A 251" as distributed by the ATV (German Association for Water, Wastewater and Waste). Because of the materials used in the manufacture of the plant, condensate with a pH value of up to 2.4 can be conveyed without any problems. For oil or gas-fired boilers with an output > 200 kW, the lifting plant must be installed downline of a neutralisation system. The condensate lifting plant can also be used in the air-conditioning and refrigeration plants where condensate is produced, for example refrigerators and freezers, evaporators, and refrigerated display cases.The plant can be installed in free-standing form or vertically wall-mounted with two fastening holes. The positioning of the motor unit on the tank is reversible, allowing a variable inlet and outlet.
Design2 inlets in the lid (19 or 24 mm). Hose connection on discharge end, DN 10 mm with built-in check valve.
Scope of deliveryFully-assembled lifting plant with standard alarm contact for con-nection to condensing boiler or alarm switchgear. Incl. hose connec-tion with built-in check valve. 5 m hose for discharge side, 1 m alarm cable and 2 m power cable with Schuko plug, wall-mounting hard-ware and installation and operating manual.
Accessories– Inlet adapter Ø 19 to 25 mm, Ø 19 to 30 mm,
Ø 20 to 40 mm – Pressure hose, 25 m long
Condensate/Wastewater/Drainage WaterWilo-DrainLift ConProduct Description
109As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift Con
Pump Equipment/Function
Lift
ing
plan
ts
• = available, – = not available
Pump Equipment/Function DrainLift Con
Design
Pump position Motor section outside of tank •
Single-pump system •
Open multi-vane impeller •
Materials
Pump Plastic •
Tank ABS •
Equipment
Level control Float switch •
Alarm Volt-free contact •
Built-in check valve body •
Mounting hardware •
Pressure hose •
110 As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift Con
Technical Data
• = available or authorised, – = not available or not authorised
Technical Data Wilo-DrainLift Con
Approved fluids
Strongly alkaline condensate (pH ≥ 2.4) •
Electrical connection
Mains connection [V] 1~230
Connected load P1 [kW] 0.08
Rated current [A] 0.8
Mains frequency [Hz] 50
Cable length from plant to switchgear/plug [m] 2
Permissible range of application
Operating mode S3
Fluid temperature, max. [°C] 80
Connections
Delivery connection [mm] 12
Inlet connection [mm] 19/24
Motor
Protection class IP 20
Dimensions/weights
Gross volume [l] 1.5
Weight [kg] 2
111As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift Con
Pump Curve, Dimension Drawing
Lift
ing
plan
ts
DrainLift ConPump Curve, Dimension Drawing
2-pole, 50 Hz
Dimension drawing
[l/h]0 50 100 150 200 250 300 350
H
0
2
4
3
5
6
1
Q
Wilo-DrainLift Con [m]
21
Ø 12
195
169,
5
82,5
112 As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift TMP, Wilo-DrainLift Box, FH/D-FH
Product Description
Wilo-DrainLift TMP Wastewater lifting plant (above-floor installation)
Type keyExample: Wilo-TMP 32- 0.5 EM
TMP Wastewater lifting plant (above-floor)32 Nominal diameter of delivery connection
(DN 32 / G 11/4)– 0.5 Rated motor power [kW]EM AC 1~230 V, 50 Hz
ApplicationsWastewater lifting plant for the automatic drainage of showers, washstands, washing machines, dishwashers etc. in old or new build-ings where wastewater cannot be fed to the main sewers by natural gravity flow or disposal of wastewater from below the backflow level. Suitable for handling drainage water that is free of faecal and fibrous matter, non-aggressive rainwater, wastewater and drainage water that is free of fats and oils. The specifications of DIN EN 12050-2 and DIN 1986-100 must be complied with.Note:Handling of sewage that contains faeces in wastewater lifting plants is not permitted. For these applications, we recommend using the Wilo-DrainLift S-XXL series sewage lifting plants.
DesignFully assembled, automatically switching wastewater lifting plant with all required switching and control equipment and built-in non-return valve.
TMP 32:Active carbon filter with overflow protection for air intake and exhaust, 2 inlet ports DN 40 at different height levels, discharge port DN 40 (G 1 1/4). The ventilation can also be guided to above roof level with a self-sealing connecting sleeve (pipe outer diameter 25 mm).
TMP 40:Flexibility for use with inlets possible both on the side and on the top (a particular advantage for retrofitted installations), easy-to-main-tain system construction with built-in TMW 32, DN 40 discharge port.
Scope of delivery Fully assembled, automatically switching wastewater lifting plant with active carbon filter (for TMP 32) and installation and operating manual.
Wilo-DrainLift BoxSubmersible wastewater plant
Type keyExample: Wilo-DrainLift Box 32/8
Box Wastewater lifting plant32 Nominal diameter of delivery connection
(DN32, Ø 40)8 Max. delivery head [m]
ApplicationsDrainage of flood-endangered rooms, garage entrances and base-ments and basement hatchways as well as showers, washbasins etc. in old and new buildings fur sub-floor installation.
DesignAutomatically switching lifting plant with built-in submersible pump. Ready-to-install for sub-floor applications. Flexibility for use with three inlet options in DN 100, of which one inlet can be used for con-nection to another tank.
Scope of delivery Fully installed and assembled pump with attached float switch in an impact-proof plastic container for sub-floor installation. Completely ready-to-operate with installed pressure line and non-return valve. Pump cable (5 m or 10 m long) with attached Schuko plug. Installa-tion and operating manual.
Wilo-DrainLift TMP, Wilo-DrainLift Box, FH/D-FHProduct Description
113As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift TMP, Wilo-DrainLift Box, FH/D-FH
Product Description
Lift
ing
plan
ts
Wilo-DrainLift FH / D-FHSubmersible wastewater plant
Type keyFH Single-pump lifting plantD-FH Double-pump lifting plant
ApplicationsWastewater lifting plant for drainage of sewage free of faeces in accordance with DIN EN 12056 in buildings located below the back-flow level. Outside of the area in which DIN EN 12050/12056 is valid, it can also be used as a faeces lifting plant. However, we recommend using DrainLift S-XXL sewage lifting plants for this purpose.
Areas of application:– Basement/drainage, garage entrances, basement hatchways– Underground car parks– Buildings– Wastewater with impurities ≤ 35 mm Ø– Showers and bathtubs– Washing machines, dishwashers
DesignFully assembled wastewater lifting plant with a 200-litre or 400-litre collector tank. Equipped with 1 or 2 free-flow impeller pumps of series Drain TC 40, TP 50, TP 65.
Wilo-DrainLift FH series:Single-pump plant with a 200 l collector tank.AC model with built-in float switch and power cable with Schuko plug.Three-phase current model with switchgear. switchgear with CEE plug, volt-free high water alarm contact, battery-operated alarm.
Wilo-DrainLift D-FH series:Double-pump plant with a 400 l collector tank.Pumps available in AC or three-phase current models. Switchgear with volt-free high water alarm contact, built-in battery-operated alarm (battery).With automatic duty cycling, standby and peak load operation.
Scope of deliveryFully assembled wastewater lifting plant including switchgear or plug and installation and operating manual.
114 As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift TMP, Wilo-DrainLift Box, FH/D-FH
Pump Equipment/Function
• = available, – = not available
Pump Equipment/Function DrainLift TMP 32-0.5.1 EM
DrainLift TMP40/8
DrainLift Box 32
DrainLift Box 40
DrainLift FH/D-FH
Pump/motor seals
In pumping medium area: Mechanical seal – • • • •
Oil seal chamber – – • • Depending on pump
Design
Pump position Submersible pump in tank • • • • •
Single-pump plant • • • • •
Double-pump plant – – – – •
Free-flow impeller • • • • •
Patented turbulator – – • – –
Materials
Motor Stainless steel • • • • •
Hydraulic housing Plastic • PP-GF30 PP-GF30 – Depending on pump
Cast iron – – – EN-GJL-200 Depending on pump
Tank Plastic ABS PE PE PE PE
Equipment
Motor Temperature (WSK) – • • • •
monitor
Level control Float switch – • • • •
Pneumatic pressure sensor • – – – –
Alarm Battery-operated – – – – •Type-dependent
Detachable pump cable – – – – Depending on pump
Pre-assembled • • • • •
Built-in check valve body • • • • –
Inlet seal – – – – –
Installation kit for pressure line connection • • • • –
Mounting hardware • • – – •
Active carbon filter • – – – –
115As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift TMP, Wilo-DrainLift Box, FH/D-FH
Technical Data
Lift
ing
plan
ts
• = available or authorised, – = not available or not authorised
Wilo-DrainLift ...
Technical DataTMP 32-0.5.1 EM TMP 40/8 Box 32/8 Box 32/11 Box 40/10
Approved fluids
Domestic sewage not containing faeces • • • • •
Domestic sewage containing faeces – – – – –
Washing machine soap and water mixture (without long-fibre particles) • • • • •
Non-chlorinated shower and bath water • • • • •
Strongly alkaline condensate – – – – –
Electrical connection
Mains connection [V] 1~230 1~230 1~230 1~230 1~230
Connected load P1 [kW] 0.33 0.45 0.45 0.75 0.94
Rated motor power P2 [kW] 0.25 0.37 0.37 0.55 0.6
Rated current [A] 1.5 2.1 2.1 3.6 4.4
Mains frequency [Hz] 50 50 50 50 50
Cable length from plant to switchgear/plug [m] 1.2 2.5 10 10 5
Permissible range of application
Operating mode S 1 (1000 h) S 3 -25% S 3 -25% S 3 -25% S 3 -25%
Max. frequency switching[per hour] – 60 60 60 30
Max. permitted pressure in the pressure line [bar] 1.0 1.1 1.1 1.1 1.1
Fluid temperature, max. [°C] 45 35 35 35 35
Fluid temperature, short periods up to 3 min. [°C] 75 90 90 90 –
Connections
Delivery connection [mm]Ø 32
(G 11/4)Ø 40 Ø 40 Ø 40 Ø 40
Inlet connection [mm]40
(2 x G 11/4)25/32/40 100 100 100
Vent line [mm] 25 32 100 100 100
Motor
Insulation class F F F F B
Protection class IP 44 IP 67 IP 67 IP 67 IP 67
Dimensions/weights
Gross volume [l] 17 32 85 85 85
Switching volume [l] 2.6 15 22 22 30
Weight [kg] 7.1 8.0 30 32 38
116 As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift TMP, Wilo-DrainLift Box, FH/D-FH
Technical Data
• = available or authorised, – = not available or not authorised
1) Outside of the area in which DIN EN 12050/12056 is valid, it can also be used as for faeces (outside of buildings)
Wilo-DrainLift ...
FH 40-0.5D-FH 40-0.5
FH 40-0.6D-FH 40-0.6
FH 50-0.7D-FH 50-0.7
FH 65-1.1D-FH 65-1.1
FH 65-1.5D-FH 65-1.5
Approved fluids
Domestic sewage not containing faeces • • • • •
Domestic sewage containing faeces – – – – – 1)
Washing machine soap and water mixture (without long-fibre particles) • • • • •
Non-chlorinated shower and bath water • • • • •
Strongly alkaline condensate – – – – –
Electrical connection
Rated motor power P2 [kW] 0.5 0.6 0.75 1.1 1.5
Rated current for 1~230 V [A] 1.9 4.7 5.5 7.7 –
Rated current for 3~400 V [A] – – 2 3.2 3.6
Mains frequency [Hz] 50 50 50 50 50
Cable length from plant to switchgear/plug [m] 5
Permissible range of application
Operating mode S 3
Max. frequency switching[1per hour] 20 20 30 30 30
Max. permitted pressure in the pressure line [bar] 2.5 2.5 2.5 2.5 2.5
Fluid temperature, max. [°C] 40 40 35 35 35
Fluid temperature, short periods up to 3 min. [°C] 60 60 60 60 60
Ambient temperature, max. [°C] 40 40 35 35 34
Connections
Free ball passage [mm] 35 35 44 44 44
Delivery connection G2
Inlet connection [mm] 100
Vent line [mm] 100
Motor
Insulation class F
Protection class (without switch box) IP 68
Dimensions/weights
Tank volume [l] 200/400
Weight [kg] 52/84 49/80 57/94 67/113 68/115
117As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift TMP
Pump Curves
Lift
ing
plan
ts
TMP 32-0,5.1Wilo-DrainLift TMPPump Curves
2-pole, 50 Hz
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
TMP 40/82-pole, 50 Hz
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
Wilo-Drain-TMP326
5
4
3
2
1
00 1 2 3 4 Q[m3/h]
H
[m]
0 0,5 1
Q
[l/s]
[m3/h]0 20 0,5 1 1,5 2,52
4 6 8
Q
H
[m]
0
4
6
8
2
[l/s]
Wilo-Drain-TMP 40/8
118 As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift TMP
Dimension Drawings, Installation Example
Typical installation scheme TMP 32/40
Dimension drawings Dimension Drawings, Installation Example
TMP 32-0,5.1
TMP 40/8
ARear view
BFront view
3
1
198
152
41
145204
2
3
1
300
A
B255,5511
426
8,5
2
4
1 = Inlet DN 402 = Inlet DN 40 (shower)3 = Discharge port G1 1/4 (DN 32)4 = Vent line DN 25
385
1
5
3 2
4
310 300
90
300
15078 75
510400
12575
1 = Pressure line DN 402 = Vent line DN 323 = Inlet DN 32 (wash basin)4 = Inlet DN 25 (washing machine)5 = Inlet DN 40 (shower)
1200
180
(TM
P 40
/8)
110
(TM
P 32
)
DN
40
1:50
1:50
Wilo-Opti-Drain-Box- TM P 3 2 - 0,5 E M2 1
Wilo-Drain TMP 32 - 0,5 EM
1: Pressure line 2: Vent line (optional)
119As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift Box
Pump Curves, Dimension Drawings
Lift
ing
plan
ts
DrainLift BoxWilo-DrainLift BoxPump Curves, Dimension Drawings
2-pole, 50 Hz
1 = DrainLift Box 32/8
2 = DrainLift Box 32/11
3 = DrainLift Box 40/10
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
Dimension drawings
DrainLift Box 32 DrainLift Box 40
[m3/h]0 2 4 6 8 10 12 14 16
H
[m]
0
4
8
6
10
12
2
Q
Wilo-DrainLift Box
32
1
Ø 500
445
760
Ø 40
Ø 50
Ø 295
350
720
110
110
100
DN100
DN100
DN100
100110
300
710
880
730
550
70
500
Ø 500
445
760
Ø 40
Ø 50
Ø 295
35072
0
110
110
100
DN100
DN100
DN100
100110
300
710
880
730
550
70
500
120 As of: 06/2004 - Subject to change without prior notice
Condensate/Wastewater/Drainage WaterWilo-DrainLift FH/ D-FH
Pump Curves, Dimension Drawings
Dimension drawings
A = Float switch (alarm), B = Float switch (start/stop)
DrainLift FH/D-FH Wilo-DrainLift FH/ D-FHPump Curves, Dimension Drawings
2-pole, 50 Hz
1 = FH 40 -0.5 (3~) and D-FH 40 -0.5 (3~)2 = FH 40 -0.6 (1~) and D-FH 40 -0.6 (1~)
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
2-pole, 50 Hz
3 = FH 50 -0.7 (1~) and D-FH 50 -0.7 (1~)4 = FH 65 -1.1 (1~) and D-FH 65 -1.1 (1~)5 = FH 65 -1.5 (3~) and D-FH 65 -1.5 (3~)
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
0
2
4
6
8
10
H
[m]
Wilo-Drain FH/D-FH
0 2 4 6 8 10 12 14 16
21
[m3/h]
Q
0
2
4
6
8
10
0 5 15 25 353010 20
543
Wilo-Drain FH/D-FH
H
[m]
Q
[m3/h]
FH 40, 50, 65 D-FH 40, 50, 65
20
675
800
520140
650
750
695
730
L
A B B
725
1050100
200
200 650
125
L
REF
Baqckflow loop
Inlet or drain
Checkvalve body
Handdiaphragmpump
Ø G1
Gate valve
121As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift KH
Product Description
Lift
ing
plan
ts
Wilo-DrainLift KHMini Sewage Lifting plant
Type keyExample: Wilo-KH 32- 0.4 EMKH Mini lifting plant with macerator for sewage
containing faeces
32 Nominal diameter of delivery connection (DN25/32)– 0.4 Rated motor power [kW]EM AC 1~230 V, 50 Hz
ApplicationsReady-to-use, limited-use lifting plant for wastewater containing faeces (for direct connection behind a toilet) with macerator for waste disposal from a single toilet and additional hand-washing basin, shower or bidet, from which the wastewater/sewage cannot be fed to the local sewer system using natural gravity flow, or that is below the backflow level. The specifications of DIN EN 12050-3 and DIN 1986-100 must be complied with. For connecting a greater number of sewage sources, or sources of a different kind, we recommend using Wilo-DrainLift series products.
DesignAutomatically operating mini lifting plant with macerator, all required switch and control equipment, built-in non-return valve, active car-bon filter, flexible discharge port and facilities for connecting a WC, two additional wastewater sources and a vent line.The KH 32 mini lifting plant is directly connected to a toilet pan with a horizontal connecting piece. Connections from additional sanitary fixtures and the pressure line are at the rear side of unit and can be optionally connected to from the right- or left-hand side. The unit is vented either directly into the room via an active carbon filter or above roof level by means of a vent pipe.
Inlet connection:– DN 100 (connected directly using sealing collar)– 2 inlets – DN 40 incl. cover plate and one non-return valve
Discharge side connection:– Delivery connection: elbow hose connector DN 25/32 including
non-return valve
Vent line: Either integrated active carbon filter with overflow protection or separate vent pipe above roof level using a self-sealing connecting sleeve (pipe outer diameter 25 mm).
Scope of deliveryFully assembled lifting plant with macerator, active carbon filter, flexible discharge port and installation and operating manual.
Sewage/FaecesWilo-DrainLift KHProduct Description
max. discharge line lengths DN 32,for best performance, the discharge line should be laidfirst as vertical as possible and then as horizontal as possible(2 x 90-degree bends and one integrated non-return valveare taken into account)
4,020 m
25 m
30 m
35 m
40 m
50 m
45 m
3,5
3,0
2,5
2,0
1,5
1,0
0
Del
iver
y he
ad in
m
122 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift KH
Pump Equipment/Function
• = available, – = not available
Pump Equipment/Function DrainLift KH 32-0.4 EM
Design
Pump position Submersible pump in tank •
Single-pump plant •
Free-flow impeller •
Macerator •
Materials
Motor housing Stainless steel 1.4301
Hydraulic housing Plastic PP-GF30
Tank Plastic ABS
Equipment
Level control Pneumatic pressure sensor •
Pre-assembled •
Built-in check valve body •
Inlet seal •
Installation kit for pressure line connection •
Mounting hardware •
Active carbon filter •
123As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift KH
Technical Data
Lift
ing
plan
ts
• = available or authorised, – = not available or not authorised
Technical Data Wilo-Drain Lift KH 32-0.4 EM
Approved fluids
Domestic sewage not containing faeces •
Domestic sewage containing faeces •
Washing machine soap and water mixture (without long-fibre particles) •
Non-chlorinated shower and bath water •
Electrical connection
Mains connection [V] 1~230
Connected load P1 [kW] 0.45
Rated current [A] 2.1
Mains frequency [Hz] 50
Cable length from plant to switchgear/plug [m] 1.2
Permissible range of application
Operating mode Intermittent service S3, 28%/36 sec. according to DIN EN 600034-1
Max. frequency switching[per hour] 100
Switch-on level (measured from floor) [mm] 70
Max. permitted pressure in the pressure line [bar] 0.7
Fluid temperature, max. [°C] 35
Ambient temperature, max. [°C] 35
Connections
Free ball passage [mm] 10
Delivery connection [mm] DN 25/32
Inlet connection [mm] 2 x DN 40DN 100
Vent line [mm] 25
Min. inlet height (lowest point to top edge of inlet) 180
Motor
Insulation class F
Protection class IP 44
Dimensions/weights
Gross volume [l] 17
Switching volume [l] 2.6
Impoundment volume (lowest point to top edge of inlet) [l] 15.5
Weight [kg] 7.8
124 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift KH 32
Pump Curve, Dimension Drawing, Typical Installation Scheme
Dimension drawing
Typical Installation Scheme
KH 32Wilo-DrainLift KH 32Pump Curve, Dimension Drawing, Typical Installation Scheme
2-pole, 50 Hz
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
[m3/h]0 1 2 3
H
[m]
0
2
1
4
3
5
Q
Wilo-DrainLift KH 32-0,4
A B
3
21
5
198
152
41
145204
4
4
3
2
276,
5
A
B255,5511
5
268,
5
23,5
1 W.C.-Inlet DN 1002 Inlet DN 403 Connection pressure tube4 Inlet DN 40 5 Vent
(*11
0)≥
180
180
270≥ 120 0
DN
40
12
1:50DN
40
1:50
1: Discharge line 2: Vent line (optional)
125As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S, M, L, XL, XXL
Product Description
Lift
ing
plan
ts
Wilo-DrainLift SSewage lifting plant
Type keyExample: Wilo-DrainLift S S Sewage lifting plant for wall cavity
installations, direct toilet connection or completeroom drainage
ApplicationsComplete, fully assembled sewage lifting plant to DIN EN 12050-1.Suitable for handling untreated sewage which cannot be disposed of by natural gravity flow to the sewer system.Wilo-DrainLift S meets the requirements of DIN EN 12050-1 as well the construction and testing requirements of the Deutsches Institut for Bautechnik (2The German Institution for Structural Engineering").Compact dimensions and a small base area requirement allow a mul-titude of applications, such as:– Retrofitting of showers, toilets, saunas etc.– Installing toilets in basement apartments– Adding on/renovating apartments and buildings
Innovative combination of different installation options of sewage lifting plants into a single device, such as:
– Direct toilet connection– Single-room drainage– Free-standing/back-to-wall installation
Suitable for the following types of installations:As a conventional sewage lifting plant for connection to a wall-mounted or free-standing WC or for drainage of an entire room.Requires a minimum of space because of the compact dimensions of the plant.In conjunction with free-standing or back-to-wall installation as a sewage lifting plant, integrated into commercially available free-standing installation systems in both back-to-wall and pedestal-type versions.
Note:After the tiles are applied, the plant must be able to be freely installed and removed. Always refer to and observe the instructions of the installation manuals for unit and accessories.
Design
Stainless steel motorProven construction in modern INOX & composite design, incl. high-efficiency free-flow impeller.
Carrying handle and fastening plateSimple to handle, secure fastening in compliance with applicable standards.
Inlet DN 40For additional inlets from washstands, bathtubs etc.
Freely selectable inletsFree surfaces on both side walls and one front wall allow the greatest degree of connection flexibility (see graphic below). Observe the minimum inlet height of the drainage sources.
Mounting beadsFor commercially available free-standing installation systems.
Standard sound insulation matsPrevent transmission of mechanical vibration.
Large inspection opening. Sloping collection chamber for sediment-free, reliable operation. Available connections for a vent line DN 70 and for a hand diaphragm pump.
Scope of deliveryFully assembled sewage lifting plant including switchgear/plug, curve cutter and installation and operating manual.
Connection flexibility
Wilo-DrainLift S, M, L, XL, XXLProduct Description
126 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S, M, L, XL, XXL
Product Description
Wilo-DrainLift M, L, XLSewage lifting plant
Type keyExample: DrainLift L1/25(3~)
Sewage lifting plant for drainage of residential and commercial buildings M1/L1 = Single-pump plants
M2/L2/XL2 = Double-pump plants/25 Max. delivery head [m](1~) AC – 1~230 V, 50 Hz
(3~) Three-phase current – 3~400 V, 50 Hz
ApplicationsSewage lifting plant for drainage of residential and commercial build-ings (e.g. pubs, stores etc.) Untreated sewage that cannot be fed to the public sewer system by gravity flow and sewage coming in from toilets below the backflow level must, according to the requirements of DIN EN 12056/DIN 1986-100, be fed to the public sewer system using an automatic lifting plant. Sewage containing petroleum oils or hazardous substances must be disposed of via an oil or petrol trap, those containing fats via a grease trap and those containing sand via a sand trap. For installations in which the feed to the lifting plant may never be interrupted during normal operation, the lifting plant must be equipped with a second conveyor (DrainLift M2/L2/XL2) with equivalent capacity, which switches on automatically when neces-sary (DIN EN 12050-1 A1).
DesignFully assembled, fully submersible sewage lifting plant (submersion height: 2m, submersion duration: 7 days) with gas-tight and water-tight collection tank and buoyancy protection. Centrifugal pump with free-flow impeller.
DrainLift M1/L1Single-pump plant with AC or three-phase motor for automatic operation. Switchgear with Schuko or CEE plug, volt-free contact, built-in alarm, built-in battery for mains-independent operation.
DrainLift M2/L2/XL2:Double-pump system with three-phase motor for automatic opera-tion (with automatic duty cycling, standby and peak load operation). Built-in double non-return valve requires only one pressure line con-nection. Switchgear with Schuko or CEE plug, volt-free contact, built-in alarm, built-in battery for main-independent operation.
OptionDrainLift L1/L2 C model, switchgear with individual fault signal and adjustable delay time.
Scope of deliverySee "Pump equipment/Function" table.
127As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S, M, L, XL, XXL
Product Description
Lift
ing
plan
ts
Wilo-DrainLift XXLSewage lifting plant
Type keyExample: DrainLift XXL 1080-2/8.4XXL Packaged sewage set for large projects
10(8) Discharge port DN 100(80)80 Total volume 800 l
40 = Total volume 400 l2 Double-pump plant8.4 Power P2 per pump [kW]
ApplicationsUntreated sewage that cannot be fed to the public sewer system by gravity flow and sewage coming in from toilets below the backflow level must therefore (according to the requirements of DIN 1986/EN 12050) be fed to the public sewer system using an automatic lift-ing plant.Sewage containing petroleum oils or hazardous substances must be disposed of via an oil or petrol trap, those containing fats via a grease trap and those containing sand via a sand trap.Sewage containing acid must first be neutralised. For sewage lines that cannot be interrupted, a standby pump (double-pump plant) is required in accordance with DIN 1986/EN 12050.
DesignFully assembled, fully submersible compact plant (submersion height: 2m, flood duration: 7 days) with one or two gas-tight and watertight collection tanks.Equipped with two Wilo-Drain TP 80 or TP 100 series sewage pumps (material: Inox and composite). Easy handling due to the low total weight of the plant; for example, double-pump plant with TP 80 pump is only 160 kg (heaviest part: the pump, at 62 kg). Excellent tank drainage due to low suction location.Note: The switchgear is not submersible and thus must be installed in such a way that it is protected from flooding.
Scope of delivery– Microprocessor-controlled switchgear for automatic duty cycling,
standby and peak load operation. Volt-free contacts and running and fault indicator lights for each pump.
– Flexible hose connection for vent line DN 70– Flexible hose connection for connecting a hand diaphragm pump.– Set containing fittings for pump to tank connections (including
vent flange and hose)See also "Pump equipment/Function" table.
128 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S, M, L, XL, XXL
Pump Equipment/Function
• = available, – = not available
Pump Equipment/Function DrainLift S1/5
DrainLift S1/7
DrainLiftM1
DrainLiftM2
DrainLiftL1
DrainLiftL2
DrainLiftXL2
DrainLift XXL
Pump/motor seals
In pumping medium area:Mechanical seal • • • • • • • •
Oil seal chamber • • • • • • • •
Design
Pump position Motor section outside of tank • • • • • • • –
Submersible pump, dry external – – – – – – – •
Freely selectable inlet position • • • • • • – –
Single-pump plant • • • – • – – –
Dual pump station – – – • – • • •
Open single-vane impeller – – – – – – – •
Free-flow impeller • • • • • • • –
Materials
Motor housing Stainless steel 1.4404
Hydraulic Plastic PUR
Tank Plastic PE
Equipment
Forced-flow casing cooling – – – – – – • •
Motor Temperature (WSK) • • • • • • • •
Monitoring Leakage – – – – – – – •
Level control Float switch – – • • • • • •
Pneumatic pressure sensor • • – – – – – –
Alarm Battery-operated – – • • • • • –
Volt-free contact • • • • • • • •
Detachable pump cable • • • • • • • •
Pre-assembled • • • • • • • –
Check valve body • • • • • • • –
Inlet seal • • • • • • – –
Curve cutter for drilling inlet hole • • • • • • – –
Hose connection for vent • • • • • • • •
Hose connection for hand diaphragm pump • • • • • • • •
Installation kit for pressure line connection – • • • • • • •
Mounting hardware • • • • • • • •
Soundproofing materials • • • • • • – –
Switchgear – – • • • • • •
129As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S, M, L, XL, XXL
Technical Data
Lift
ing
plan
ts
• = available or authorised, – = not available or not authorised
Wilo-DrainLift ...Technical Data S1/5 S1/7 M1 M2 L1/10/
15/20/25L2/10/
15/20/25 XL10/
15/20/25
Approved fluids
Domestic sewage not containing faeces • • • • • • •
Domestic sewage containing faeces • • • • • • •
Washing machine soap and water mixture (without long-fibre particles) • • • • • • •
Non-chlorinated shower and bath water • • • • • • •
Electrical connection
Connected load P1 at 1~230 V, 50 Hz [kW] 1.25 1.6 1.6 1.6 – – –
Connected load P1 at 3~400 V, 50 Hz [kW] 1.1 1.5 1.5 1.5 2.95 - 5.3 2.95 - 5.3 2.95 - 5.3
Rated current at 1~230 V, 50 Hz [A] 6.8 7.5 7.5 7.5 – – –
Rated current at 3~400 V, 50 Hz [A] 2.6 3.0 3.0 3.0 5.95 - 8.9 5.95 - 8.9 5.95 - 8.9
Mains frequency 50 50 50 50 50 50 50
Pump speed [rpm] 1,450 1,450 1,450 1,450 2,900 2,900 2,900
Cable length from plant to switchgear/plug [m] 4 4 4 4 4 4 4
Permissible range of application
Operating mode S3 15% S3 15% S3 15% S3 15% S3 15% S3 15% S1S3 60%
Max. frequency switching[per hour] 30 30 30 60 30 60 60
Switch-on level (measured from floor) [mm] 180 180 170 180 170 180 650
Max. permitted pressure in the pressure line [bar] 1.5 1.5 1.5 1.5 2.5 2.5 2.5
Fluid temperature, max. [°C] 35 35 40 40 40 40 40
Fluid temperature, short periods [°C] 60 60 60 60 60 60 60
Ambient temperature, max. [°C] 40 40 40 40 40 40 40
Connections
Free ball passage [mm] 40 40 45 45 40 40 40
Delivery connection [mm] DN 80 DN 80 DN 65DN 80
DN 65DN 80
DN 65DN 80
DN 65DN 80
DN 65DN 80
Inlet connection [mm] DN 40DN 100
DN 40DN 100
DN 40DN 100
DN 40DN 100
DN 40 DN 100 DN150
DN 40 DN 100 DN150
DN 100DN 150
Vent [mm] DN 70
Min. inlet height (lowest point to top edge of inlet) 180 180 180 180 180 180 700
Motor
Insulation class H
Protection class (without switch box) IP 67
Dimensions/weights
Gross volume [l] 45 45 90 130 90 130 440
Switching volume [l] 20 20 30 40 30 40 220
Weight [kg] 30 30 45 72 55 85 135
130 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S, M, L, XL, XXL
Technical Data
• = available or authorised, – = not available or not authorised
Wilo-DrainLift XXL...
840-2/1.4880-2/1.4
840-2/1.8880-2/1.8
1040-2/3.91080-2/3.9
1040-2/5.21080-2/5.2
1040-2/7.01080-2/7.0
1040-2/8.41080-2/8.4
Approved fluids
Domestic sewage not containing faeces •
Domestic sewage containing faeces •
Washing machine soap and water mixture (without long-fibre particles) •
Non-chlorinated shower and bath water •
Electrical connection
Mains connection [V] 3~400 3~400 3~400 3~400 3~400 3~400
Connected load P1 [kW] 1.9 2.3 4.4 6.2 8.4 10.0
Connected load P2 [kW] 1.4 1.8 3.9 5.2 7.0 8.4
Rated current [A] 4.5 5.1 10.5 12.8 15.6 18.1
Mains frequency 50
Pump speed [rpm] 1,450
Cable length from plant to switchgear/plug [m] 10
Permissible range of application
Operating mode S3
Max. frequency switching [per hour] 60
Switch-on level (measured from floor) [mm] 560
Max. permitted pressure in the pressure line [bar] 2.5
Fluid temperature, max. [°C] 40
Fluid temperature, short periods [°C] 65
Ambient temperature, max. [°C] 40
Connections
Free ball passage [mm] 80
Delivery connection [mm] DN 80 DN 100
Inlet connection [mm] 3 x DN 100/1501 x DN 100
Vent [mm] 70
Min. inlet height (lowest point to top edge of inlet) [mm] 700
Motor
Insulation class F
Protection class (without switch box) IP 68
Dimensions/weights
Gross volume [l] 400/800
Switching volume [l] 200/400
Tank volume [l] 400/2 x 400
Weight [kg] 160/195 195/230
131As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S
Pump Curve, Dimension Drawing
Lift
ing
plan
ts
Dimension drawing
DrainLift SWilo-DrainLift SPump Curve, Dimension Drawing
4-pole, 50 Hz
1 = DrainLift S 1/5
2 = DrainLift S 1/7
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
[m3/h]0 10 20 30 40 50
H
[m]
0
4
6
2
Q
2
1
Wilo-DrainLift SQminDN 100
QminDN 80
7
DN80/100
DN80
3
2
1DN80
350
190
260
392
4
250
180 35
0
250
180 35
0
250
180
135
150 300799
150340
799637
65
337
300
245
150
100
19378
132 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S
Typical Installation Schemes
Typical installation schemes
Direct toilet connectionTypical Installation Schemes
Free-standing type
1 Installation Frame
Hand diaphragm pump connected when needed Stationary hand diaphragm pump connection
18025
0
1 1 1
133As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S
Mechanical Accessories
Lift
ing
plan
ts
Mechanical accessories Mechanical Accessories
Single ended flange nipples (Item 1)DN 80/100 (in the scope of delivery of the DrainLift S 1/7 plant).
Check valve body (Item 2)With unrestricted passage, installation accessories, flanges PN 10/16, to DIN 2501, DN 80
Gate valve (Item 3)Made of cast iron 25 (EN-GJL-250), installation accessories, flanges PN 10/16 to DIN 2501, DN 80
Vent combination pipe (Item 4)DN 70, plastic, for connecting the hand diaphragm pump in an emergency
Hand diaphragm pump (Item 5)R 11⁄2, 16 kg
Installation accessoriesFor a flange connection with 8 screws and nuts and 1 flat seal, for flanges PN 10/16, DIN 2501, DN 80
Inspection frame(H 50 x W 85 cm) steel door, painted white for free-standing-type installation
Inspection frame(H 50 x W 85 cm) Sheet steel, suitable for tiled installations
Concealed distribution boxIncl. motor protection, acoustic alarm signal for Wilo-DrainLift S with bare cable end
Wilo KAS Mini alarm switchgear with 70 dBA signal bell, signal transmitter (electrode) with 3 m cable, self-recharging power supply pack (power reserve approx. 5 hrs.) in ISO plug housing (Schuko). Protection class IP 30, 230 V~/9 V=; 1.5 VA
5
1
3
2
5
4
240*
260
245* Dimension with Z No.
295
180
220180
Ø 75
°45
Metal door 800 x 500 mm
Metal doorfor tilesMagnets to hold
metal door
Installation depth 85 mm
134 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift M
Pump Curve, Dimension Drawing
Dimension drawing DrainLift M1
DrainLift MWilo-DrainLift MPump Curve, Dimension Drawing
4-pole, 50 Hz
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
[m3/h]0 10 20 30 40 50
Q
H
[m]
0
4
6
2
Wilo-DrainLift MQminDN 100
QminDN 80
250
180
250
180
45
Angle bracket
770
555
50
DN 40
DN 40
DN 100
DN 40
DN 70
50
50
55
400
200
504
174
630
45
555
710
188
77
135As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift M
Dimension Drawing
Lift
ing
plan
ts
Dimension drawing DrainLift M2 Dimension Drawing
250
180
250
180
45
Angel bracket
755
470
50
DN 40
DN 40
DN 100
DN 40
DN 70
50
50
65
640
400
700
215
830
45
555
710
188
77,5
136 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift L
Pump Curve
DrainLift LWilo-DrainLift LPump Curve
2-pole, 50 Hz
1 = DrainLift L 1/10 and L 2/10
2 = DrainLift L 1/15 and L 2/15
3 = DrainLift L 1/20 and L 2/20
4 = DrainLift L 1/25 and L 2/25
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
0
5
0 10 20 30 40 50 60
20
15
10
1
2
3
4
Wilo-DrainLift L
[m3/h]
Q
H
[m]QminDN 100
QminDN 80
137As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift L
Dimension Drawing
Lift
ing
plan
ts
Dimension drawingDimension Drawing
DrainLift L1
5050
400
555 56
5
250
180
45
5055
77
174
715
192,
5
45
DN40
DN40770
630
504
200
630
DN40
Angle bracket
138 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift L
Dimension Drawing
Dimension drawing
DrainLift L2
5050
640
555
565
250
180
45
5065
715
193
45
DN40
DN40 755
830
700
400
630
DN40DN70
Angle bracket
139As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift L
Typical Installation Schemes
Lift
ing
plan
ts
Typical installation schemes
01 Gate valve DN 100 or DN 150(accessories)
02 Single ended flanged nipple DN 100 or DN 150 with hose (accessories)
03 Single ended flanged nipple DN 80/10004 Check valve body (built into
discharge pipe)05 Gate valve DN 80 (accessories)06 Switchgear DrainLift L07 Hand diaphragm pump (accessories)08 3-way stop cock (accessories)09 Check valve body (accessories)10 Drainage pump (Twister) 11 Vent connection (DN 70)
Typical Installation Schemes
1
11
2
3 5
4
8
7
6
9
10
Backflow level(usually road tops)
180 250
140 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift XL
Pump Curve
DrainLift XLWilo-DrainLift XLPump Curve
2-pole, 50 Hz
1 = DrainLift XL 2/10
2 = DrainLift XL 2/15
3 = DrainLift XL 2/20
4 = DrainLift XL 2/25
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
0
5
0 10 20 30 40 50 60
20
15
10
Wilo-DrainLift XL
4
32
1
[m3/h]
Q
H
[m]QminDN 100
QminDN 80
141As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift XL
Dimension Drawing
Lift
ing
plan
ts
Dimension drawingDimension Drawing
5050
680
840
Ø 10
Ø 1
60
1000
900
700
575
50
100
Ø 10 DN 40460
640
640
70
975
975 11
00
990
193
DN 40
DN 70
142 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S, M, L, XL
Dimension Drawings, Accessories
Typical Installation SchemeDimension Drawings, Accessories
01 Gate valve DN 100 or DN 150(accessories)
02 Single ended flanged nipple DN 100 or DN 150 with hose (accessories)
03 Single ended flanged nipple DN 80/10004 Check valve body (built into
discharge pipe)05 Gate valve DN 80 (accessories)06 Switchgear DrainLift XL07 Hand diaphragm pump (accessories)08 3-way stop cock (accessories)09 Check valve body (accessories)10 Drainage pump (e.g. Twister) 11 Vent connection (DN 70)
Wilo-DrainLift S, M, L, XLAccessories
DrainLiftS
DrainLiftM
DrainLiftL
DrainLiftXL
Inlet connection:
Gate valve * (Item 1)
DN L [mm] D [mm]100 190 325150 210 425
DN 100 DN 100
or DN 150
DN 100or
DN 150
DN 100or
DN 150
Single ended flanged nipple with hose and hose clip * (Item 2)
DN L [mm]100 190150 210
2x DN 100
2x DN 100
or2x
DN 150
2x DN 100
or2x
DN 150
2xDN 100
or2x
DN 150
Discharge side connection:
Check valve body * (Item 4)
DN H [mm] L [mm]80 245 260
DN 80 built-in built-in built-in
Gate valve * (Item 5)
DN L [mm] D [mm]80 180 295 DN 80 DN 80 DN 80 DN 80
Single ended flanged nipple with hose and hose clip * (Item 3)
DN L [mm]80 180100 190
S 1/5DN 80S 1/7
DN 80/100 built-in
80/100built-in
80/100built-in
80/100built-in
13
5
4
6
10
9
8
7
2
11
Backflow level(usually roadtops)
L
DDN
L
DN
H
L
L
DDN
L
DN
143As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift S, M, L, XL
Accessories
Lift
ing
plan
ts
* Required for installation in accordance with applicable standards/recommendations.
Other connections/accessories
Hand diaphragm pump 1 1/2 (Item 7)
• • • •
3-way stop cock (Item 8)
• • • •
KAS *,Mini alarm switchgear with signal bell
or
• Built-in, battery-operated alarm system
DrainAlarm 2 *, battery-operated alarm with visual and acoustic alarm
• Built-in, battery-operated alarm system
Wilo-DrainLift S, M, L, XLAccessories
DrainLiftS
DrainLiftM
DrainLiftL
DrainLiftXL
R11/2
246
378500
R11/2
DrainAlarm 2
144 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift XXL
Pump Curves
DrainLift XXLWilo-DrainLift XXLPump Curves
4-pole, 50 Hz
1 = DrainLift XXL 840-2/1.4 and 880-2/1.42 = DrainLift XXL 840-2/1.8 and 880-2/1.83 = DrainLift XXL 1040-2/3.9 and 1080-2/3.94 = DrainLift XXL 1040-2/5.2 and 1080-2/5.25 = DrainLift XXL 1040-2/7.0 and 1080-2/7.06 = DrainLift XXL 1040-2/8.4 and 1080-2/8.4
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
Dimension drawings Dimension Drawing
Single Tank Wilo-DrainLift XXL
16012080400
0
0 10 20 30 40 50
20
16
12
4
8
[l/s]
Q
H
[m]
4
5
6
321
[m3/h]
QminDN 100
QminDN 80
Wilo-DrainLift XXL
Inlets optionalØ 110/160
Manual diaphragmpump connection Ø 50
Inlets optionalØ 110/160
780
880
500
B
170
815
700
31 788 463
200 190
H
GF
E
D
850
200
DN80/DN100
Ø 75Air venting
Hand diaphragmpump
CA
170
145As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift XXL
Dimension Drawing, Dimensions
Lift
ing
plan
ts
Dimensions
Dimension drawings Dimension Drawing, Dimensions
Dual Tank Wilo-DrainLift XXL
Wilo-DrainLift XXL... Dimensions
A Bwith 1 tank
Bwith 2 tanks
C D E F G HDN 80 HDN 100
[mm]
840 and 880-2/1.4840 and 880-2/1.8
1,965 930 1,695 1,345 238 500 260 180 1,470 1,550
1040 and 1080-2/3.91040 and 1080-2/5.21040 and 1080-2/7.01040 and 1080-2/8.4
1,990 960 1,710 1,355 260 547 300 190 - 1,650
Inlets optionalØ 110/160
Manual diaphragmpump connection Ø 50
Tankconnection
Inlets optionalØ 110/160
Inlet optionalØ 110
880
840
B
170
60815 56
056
0
700
31 788 463
200 190
H
GF
E
D
850
200
DN80/DN100
Ø 75Air venting
Hand diaphragmpump
CA
170
146 As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift XXL
Dimension Drawings, Accessories
Typical Installation: Wastewater and sewage lifting plant (sewage includingfaeces); Wilo-DrainLift XXLl double-pump plant
Dimension Drawings, Accessories
01 Gate valve DN 100 or DN 150(accessories)
02 Single ended flanged nipple with hose andhose clip
03 Flexible vent hose connector04 Connector installation kit04a Gate valve DN 10005 Hand diaphragm pump (accessories)06 Check valve body07 Gate valve08 Single ended flanged nipple with hose and
hose clip09 3-way stop cock (accessories)10 Breeches pipe11 Microprocessor controlled switchgear12 Mini alarm switchgear
Pump curves 1 and 2Pump: TP 80
Discharge port DN 80
Pump curves 3 to 6Pump: TP 100
Discharge port DN 100
Inlet connection:
Gate valve * (Item 1)
DN L [mm] D [mm]100 190 325150 210 425
DN 100 or DN 150 DN 100 or DN 150
Single ended flanged nipple with hose and hose clip * (Item 2)
DN L [mm]100 190150 210
DN 100 or DN 150 DN 100 or DN 150
Discharge side connection:
Check valve body * (Item 6)
DN H [mm] L [mm]80 245 260100 282 300
DN 80 (x 2) DN 100 (x 2)
Gate valve * (Item 7)
DN L [mm] D [mm]80 180 295100 190 325
DN 80 (x 2) DN 100 (x 2)
Single ended flanged nipple with hose and hose clip * (Item 8)
DN L [mm]80 180100 19080/100 190
DN 80 (x 2)or
DN 80/100 (2x)DN 100 (x 2)
Backflow level(usually roadtops)
Inlet
Drainage pump
Ventilation
1 2 3 5
9
1211
1087
6
4a
4
L
D
DN
L
DN
H
L
L
D
DN
L
DN
147As of: 06/2004 - Subject to change without prior notice
Sewage/FaecesWilo-DrainLift XXL
Dimension Drawings, Accessories
Lift
ing
plan
ts
* Required for installation in accordance with applicable standards/recommendations.
Gate valve (Item 10)
DN A [mm] B [mm] No. oftanks
80 500 260 1100 500 465 180 260 2100 465 2
DN 80/80/80 DN 100/100/100
Other Connections
(no illustration available)
Installation set for pump to tank con-nections incl. vent flange and hose and flexible connection to hand diaphragm pump (Item 4)
Included in the scope of delivery
Included in the scope of delivery
Gate valve * (Item 4)
DN L [mm] D [mm]100 190 325
DN 100 (x 2) DN 100 (x 2)
Hand diaphragm pump R 1 1/2 (Item 5)
Accessories Accessories
Flexible hose connection for vent (Item 3)
DN L [mm]70 130
Included in the scope of delivery
Included in the scope of delivery
3-way stop cock (Item 9)Accessories Accessories
Microprocessor-controlled switchgear (Item 11) Included in the scope of
deliveryIncluded in the scope of
delivery
KAS * (Item 12), mini alarm switchgear with signal bell
or
Accessories Accessories
DrainAlarm 2 *, battery-operated alarm system with visual and acoustic alarm
Accessories Accessories
Pump curves 1 and 2Pump: TP 80
Discharge port DN 80
Pump curves 3 to 6Pump: TP 100
Discharge port DN 100
A
B
L
D
DN
R11 /
2
246
378500
R11 /
2
L
DN
DrainAlarm 2
148 As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsProduct Overview
Wet Sump Pumping StationsProduct Overview
Wilo-DrainLift WS Duty chart (2/4-pole, 50 Hz)
• Moulded PE sump pump station• Applications:
For pumping wastewater and sewage from building systems, rooms and sur-faces under the backflow level outside of buildings.
Wilo-DrainLift WB Duty chart (2-pole, 50 Hz)
• Sump pump station, concrete• Applications:
Mechanical building services for collec-tion and pumping of wastewater and sewage from– Basement floors– Air raid shelters– Underground car parkingMunicipal and industrial sewage disposal.
Duty chart (4-pole, 50 Hz)
Duty chart (2/4-pole, 50 Hz)
Duty chart(4-pole, 50 Hz)
0 20 40 60 80 1000
8
16
24
32
H[m
]
TP 40S
TP 65 TP 80TP 50
Q[m3/h]
Wilo-DrainTP40S, TP50,TP65, TP80,
0 10 20 30 40 500
8
16
24
32
H[m
]
TP40 S
TP65TP50
Q[m3/h]
Wilo-DrainTP40S, TP50, TP65
0 50 100 150 200 250 3000
5
15
10
20
25
H[m
]
TP 80
TP 100
TP 150
Q[m3/h]
Wilo-DrainTP80 - TP150
Wilo-DrainSTC 80/100
STC 100
STC 80
0 40 80 120 160 200
10
20
30
40
50
60
H[m
]
Q[m3/h]
0 50 100 150 2000
5
15
10
20
H[m
]
STS 80
STS 100
Q[m3/h]
Wilo-DrainSTS 80/100
149As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsProduct Advantages
Wet
Sum
p Pu
mpi
ng S
tatio
ns
Product Advantages
Wilo-DrainLift WS
• Sediment-free collection chamber• Maximum stability due to hemispherical shaft bottom• 2/4 inlets selectable on-site
Wilo-DrainLift WB
• Large scope of delivery• Allows individual solutions
150 As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsWilo-DrainLift WS, WB
Product Description
Wilo-DrainLift WSMoulded PE sump pump station
Type keyExample: WS 900 E/TP 40 SWS Moulded PE sump pump station
900 Sump diameter900 = 900 mm1,100 = 1,100 mm
E E = Single pump D = Double pump
TP 40 S Selected pump type
ApplicationsPumping wastewater and sewage from building systems, rooms and from surfaces below the backflow level (EN 752/EN 12050). The moulded PE sump pump station is designed for outdoor underground installation without the necessity of associated concrete work. A timesaving, cost-effective and easy-to-install solution for every planner and builder.Suitable for use as a ready-to-install sump pump station in pressure drainage applications and as a collector pump station in gravity drainage systems.
Applicable Pump Types
TS 40For slightly contaminated fluids, 10 mm free ball passage, detachable power cable.
TP 50For heavily contaminated fluids, 44 mm free ball passage, detachable power cable.
TP 65For heavily contaminated fluids, 44 mm free ball passage, detachable power cable.
TP 80For heavily contaminated fluids and faeces, 78 mm free ball passage. Explosion protection as standard, detachable power cable (single pump station only).
TP 40 SFor heavily contaminated fluids and sewage. Explosion protection as standard (3~400 V only), detachable power cable. With patented macerator:– Inside rotating blade– Conically designed macerator– Absolutely reliable operation
Design– Maximum working load 5 kN/m2 (in accordance with DIN EN 124,
Group 1)– Maximum pressure in the pressure line 6 bar– Moulded PE sump pump station made of recyclable PE– Highest degree of buoyancy protection due to 2/4 (WS 900 = 2,
WS 1100 = 4) side fins fitted as standard (no concrete rings required)
– 2/4 inlets selectable on-site– Maximum stability due to hemispherical shaft bottom– Wilo above-water coupling– 2 ports DN 100 for vent and power cable– Sediment-free collection chamber due to hemispherical shapeof
the pump sump– Easy access to the level sensor due to installation with suspended
holding rod
Scope of delivery– Stainless steel discharge pipe from pump discharge port to
approx. 10 cm outside the shaft– Above water coupling system including seals– Check valve, gate valve, completely assembled– Flushing connection G 11/2– Stainless steel chain including fixing hook– Holding pipe for level monitoring (level sensor Type N,
Float switch)– Installation and operating manual
Double pump stations are always supplied with twice the number of above-water couplings and fittings.
Wet Sump Pumping StationsWilo-DrainLift WS, WBProduct Description
151As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsWilo-DrainLift WS, WB
Product Description
Wet
Sum
p Pu
mpi
ng S
tatio
ns
Wilo-DrainLift WBConcrete shaft pumping station
Type keyExample: WB 100 E/TP 40 SWB Sump pump station, concrete
100 Inner diameter of shaft [cm]E E = Single pump
D = Double pumpTP 40 S Selected pump type
ApplicationsMechanical building services for collection and pumping of waste-water and sewage from– Basement floors– Air raid shelters– Underground car parksMunicipal and industrial sewage disposal. Suitable for use as a fully assembled sump pump station in pressure drainage applications and as a collective pumping station in gravity drainage.
Applicable Pump Types
TP 40 SFor heavily contaminated fluids and faeces, detachable power cable. With patented macerator:- Internally located cutters- Conically designed macerator- Absolutely reliable operation
TP 50 and TP 65For heavily contaminated fluids, 44 mm free ball passage. Explosion protection as standard, detachable power cable.
STC, STS, TP 80-150For heavily contaminated fluids and sewage.
DesignWB sump pump stations are available in two design variants:
Individual:Sump dimensions, inlet and discharge connections are freely selecta-ble, and a wide range of accessories, including shaft ladders, pedes-tals, special paints etc. is available. For quotations for individual projects please contact your local Wilo representative
Standard:Details on sump dimensions, inlet and discharge connections are listed on the following data sheets. Accessories can be supplied in the listed variants; however, modifications other than those variants are not possible. Freight and installation are customised. Please contact your local Wilo representative.The standard version is made of monolithic, statically tested, imper-meable reinforced concrete elements in accordance with DIN 4281, Part 1 and DIN 1045 of class B 45 concrete with a load capacity of up to SLW 60, and has an almost sediment-free collection chamber with silicified interior.
Scope of delivery (standard version)– Steel discharge pipe– Elbow base– Chain 5 m– Guide pipe/cable– Gate valve– Check valve body– Y-piece (for dual pump plant)– Discharge connection : Plasson threaded fittings or
EKS-piece– F-sleeve DN 100 for on-site cable lead-throughs and vent con-
nections offset by 180º– Cover plate with a loading capacity of up to SLW 60 with 1 or 2
openings, (Ø 610 x 250 mm, for TP 150 Ø 800 x 150 mm)– 1 or 2 class B covers (Ø 610 x 150 mm,
for TP 150 Ø 800 x 150 mm)– Installation and operating manual
Double pump stations are always supplied with twice the number of above-water couplings and fittings.
152 As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsWilo-DrainLift WS
Pump Curve, Dimension Drawings
Dimension drawings
DrainLift WSWilo-DrainLift WSPump Curve, Dimension Drawings
Pump chart Wilo-Drain TP (50 Hz)
For individual pump curves, refer to the technical data for the respective pump.
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
Wilo-DrainLift WS 900 - Dimensions for sump shortenings
0 20 40 60 80 1000
8
16
24
32
TP 40S
TP 65 TP 80
TP 50
[m3/h]
Q
H
[m]
Wilo-DrainTP40S, TP50, TP65, TP80
A
Ø 840
Ø 740
2 x DN100
2 x DN150
G 1 1/2 "
405100
OFF
830
856
560
1800
740
1170
A
430
315
195
A
1260
45°
153As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsWilo-DrainLift WS
Pump Curve, Dimension Drawings
Wet
Sum
p Pu
mpi
ng S
tatio
ns
Wilo-DrainLift WS 1100 - Dimensions for shaft shortenings
Wilo-DrainLift WS 900 with pump Wilo-DrainLift WS 1100 with pump
TS 40 TP 50 TP 65 TP 40 S TP 50 TP 65 TP 80 TP 40 S
single double single single single double single double single single single double
Pump hight „Stopp“ dimension A 200 354 220 285 180 230 310 260 360 330 200 240
G 1 1/2 "Ø 840
Ø 740
527
100
OF F
1500
2 x DN100
A
625
1800
765
1095
675
A
375
250
125
Ø 1084
22,5°
45°
4x90
° = 3
60°
4 x DN150
1500
A
154 As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsWilo-DrainLift WS
Mechanical AccessoriesAccessories for WS sump pump station Mechanical Accessories
Shaft extensions made of PE(Ø 730 x 800 mm), incl. installation accessories, seal and holding rod extension for level sensor (custom lengths available upon request).Extensions may not be connected to each other. A maximum of 1 extension is possible per shaft.
Sump cover made of PE"Standard" Ø 830 mm incl. non-slip profile on the top side and two locks on the inside. Class A for pedestrian traffic
Sump cover made of PE"Submersible" Ø 960 x100 mm includes non-slip profile on the top and six stainless steel locks for locking to the outside. Class A for pedestrian traffic
Clamping connector made of PEfor discharge pipe connection outside of the sump – 11/2" (Rp (JG)) with 50 mm outer Ø– 11/2" (Rp (JG)) with 63 mm outer Ø– 2" (Rp (JG)) with 63 mm outer Ø
155As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsWilo-DrainLift WB
Pump Curves
Wet
Sum
p Pu
mpi
ng S
tatio
ns
In accordance with EN 12056-4.6.1, a flow velocity (in the pressure line) of between 0.7 and 2.3 m/s is to be maintained.
DrainLift WBWilo-DrainLift WBPump Curves
2-pole, 50 Hz 2/4-pole, 50 Hz
4-pole, 50 Hz 4-pole, 50 Hz
0 10 20 30 40 50 600
8
16
24
32
TP40 S
TP65TP50
[m3/h]
Q
H
[m]
Wilo-DrainTP40S, TP50, TP65
[m3/h]
Q
H
[m]Wilo-Drain STC 80/100
STC 100
STC 80
0 40 80 120 160 200
10
20
30
40
50
60
70
[m3/h]
Q
H
[m]
0 50 100 150 2000
5
15
10
20
STS 80
STS 100
Wilo-DrainSTS 80/100
[m3/h]
Q
H
[m]
0 50 100 150 200 250 300 3500
5
15
10
20
25
TP 80
TP 100
TP 150
Wilo-DrainTP80 - TP150
156 As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsWilo-DrainLift WB
Dimension Drawings
Dimension drawings
Prefabricated self-contained concrete sump WB 100 – standardDimension Drawings
Single pump station- WB 100 E/TP 40 S- WB 100 E/TP 50- WB 100 E/TP 65- WB 100 E/TP 80- WB 100 E/TP 100
Prefabricated self-contained concrete sump WB 100 – standard
Double pump station- WB 100 D/TP 40 S- WB 100 D/TP 50- WB 100 D/TP 65
Class B KN 125
a
Inlet
1240
1000
1000
1400
650
1750
2400
DN 150D
N (b
)
(a)
Cable conduitwith wire pullDN 100 PVC-KGto be laid on site
Inlet D N 150for PVC-KG pipe
Ductwork for ventilationDN 100 PVC-KG
Ductwork forventilationDN 100 PVC-KG
a
Ductwork for ventilationDN 100 PVC-KG
Inlet
Inlet DN 150for PVC-KG pipe
1240
1000
1000
1400
650
1750
2400
DN 150
DN
(b)
(a)
Class B KN 152
Cable conduitwith wire pullDN 100 PVC-KGto be laid on site
Ductwork forventilationDN 100 PVC-KG
157As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsWilo-DrainLift WB
Dimension Drawings
Wet
Sum
p Pu
mpi
ng S
tatio
ns
Prefabricated self-contained concrete sump WB 150 – standard
Single pump station- WB 150 E/TP 150
Prefabricated self-contained concrete sump WB 150 – standard
Double pump station- WB 150 D/TP 80 - WB 150 D/TP 100
(a)
Inlet
1800
1500
1000
1900
650
2250
2900
DN 150D
N (b
)
(a)
Ductwork for ventilation DN 100 PVC-KG
Class B KN 125
Ductwork for ventilationDN 100 PVC-KG
Inlet DN 150for PVC-KG pipe Cable conduit
with wire pullDN 100 PVC-KGto be laid on site
(a)
Inlet
1800
1500
1000
1900
650
2250
2900
DN 150
DN
(b)
(a)
Cable conduitwith wire pullDN 100 PVC-KGto be laid on site
Inlet D N 150for PVC-KG pipe
Ductwork for ventilationDN 100 PVC-KG
Ductwork forventilationDN 100 PVC-KG
Class B KN 125
158 As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsWilo-DrainLift WB
Dimension Drawings
Prefabricated self-contained concrete sump WB 200 – standard
Double pump station- WB 200 D/TP 150
Wilo-DrainLift WB...
100E/TP 40 S
100E/TP 50
100E/TP 65
100E/TP 80
100E/TP 100
100D/TP 40 S
100D/TP 50
100D/TP 65
150E/TP
150
150D/TP 80
150D/TP 100
200D/TP
150
min. level pump „off“ dimension A 245 510 510 315 370 245 510 510 410 315 370 410
Pressure tube dimension B DN 50 DN 50 DN 65 DN 80 DN 100 DN 50 DN 50 DN 65 - - - -
Class B KN 125
(a)
Inlet
2300
2000
1000
1900
650
2250
2900
DN 200D
N (b
)
(a)
Cable conduitwith wire pullDN 100 PVC-KGto be laid on site
Inlet DN 200for PVC-KG pipe
Ductwork for ventilationDN 100 PVC-KG
Ductwork forventilationDN 100 PVC-KG
159As of: 06/2004 - Subject to change without prior notice
Wet Sump Pumping StationsWilo-DrainLift WB
Mechanical Accessories
Wet
Sum
p Pu
mpi
ng S
tatio
ns
Accessories WB 100, 150, 200Mechanical Accessories
WB 100, WB 150:Class D cover, 400 kNØ 625 x 160 mm, weight: 164 kg
WB 150 E/TP 150, WB 200:Class D cover, 400 kNØ 800 x 100 mm, weight: 160 kg
WB 100:Sump Extension Rings Ø 1,000 x 500 mm, weight: 500 kg
WB 100:Sump Extension Rings Ø 1,000 x 750 mm, weight: 750 kg
WB 100:Sump Extension Rings Ø 1,000 x 1,000 mm, weight: 1,000 kg
WB 150:Sump Extension Rings Ø 1,500 x 500 mm, weight: 950 kg
WB 150:Sump Extension Rings Ø 1,500 x 1,000 mm, weight: 1,900 kg
625
82516
0
800
1000
100
1000
1240
500
1000
1240
750
1000
1240
1000
1500
500
1800
1000
1800
1500
160 As of: 06/2004 - Subject to change without prior notice
Notes
161As of: 06/2004 - Subject to change without prior notice
Notes
162 As of: 06/2004 - Subject to change without prior notice
Notes
163As of: 06/2004 - Subject to change without prior notice
Notes
164 As of: 06/2004 - Subject to change without prior notice
Notes
165As of: 06/2004 - Subject to change without prior notice
Notes
166 As of: 06/2004 - Subject to change without prior notice
Notes
167As of: 06/2004 - Subject to change without prior notice
Notes
168 As of: 06/2004 - Subject to change without prior notice
Notes
169As of: 06/2004 - Subject to change without prior notice
Notes
170 As of: 06/2004 - Subject to change without prior notice
Notes
171As of: 06/2004 - Subject to change without prior notice
Notes
172 As of: 06/2004 - Subject to change without prior notice
Notes
173As of: 06/2004 - Subject to change without prior notice
Notes
174 As of: 06/2004 - Subject to change without prior notice
Notes
175As of: 06/2004 - Subject to change without prior notice
Notes