product pulse - myers tire supply

To order, contact your local Myers representative or call

myerstiresupply.com800-998-9897

1

COMPATIBLE

Look for the icon!

Product PulseBrought to you by Myers Tire Supply

2016 Volume 2 Issue 1

Robinair A/C machines will give a warning when 100 lbs. of the filter capacity has been used; the machine will lock down when the 150 lb. filter capacity has been reached and the machine will no longer function.

• Always keep a maintenance kit on hand to avoid service downtime

• Eliminates odors• Leaves sanitized scent• Kills mold and mildew creating a safe environment

• Increases life of compressor• Lowers the vent temperature output• Easily diagnose leaks

ROBINAIR Maintenance Kits

ROBINAIR 16600 Electronic Leak Detector

The 16" goose-neck probe holds its position for easy operation. Features a sound alarm that increases as the tip nears higher concentrations and an easy-to-read LED display. Eliminates background contamination to pinpoint leaks. Four AA alkaline batteries (included) provide approximately 25 hours of testing.

Cold-Plus Automotive A/C System Treatment

ZAK A/C Power Booster

Restores A/C performance by providing a 2-ounce oil charge and makes leaks easier to find with tracer dye.

#89538 Per can

#17503 #17502

#89539 Case of 12

#02998

#02472

• For all CFC, HCFC and HFC refrigerants• True one hand operation

ZAK Ventilation Treatment

Formulated to quickly and effectively eliminate foul, musty odors from a vehicle’s HVAC system.

• Removes "oil fouling" that reduces A/C system efficiency

• 5 Minute procedure• Extends compressor life, improves

heat transfer and provides colder vent temperature

For models using 34724 filter-dryer (17700A, 17700-2K, 3422000, 34700, 34700-2K, 34700Z, 34711-2K, 34788, 34788H, 34788NI, 34788NI-H, 34800, 34800-2K, 34900 Series

Myers is your source for Bosch, Anco and Goodyear Wiper Blades

#02974 Myers #02965 - 34788NIMyers #02462 - 34788NI-H

Robinair # 34288 34788NI 34788NI-H 34988 AC1234-6

Myers # 02974 02965 02462 02999 0409698.5% Recovery Efficiency X X X

Oil Inject X X

Visual & Audible Alarm X X X X

Save & Print Service Data optional `1 X X

Automatic Dye Injection X

A/C System Flush X X X

Electric Vehicles X X

Fully Automatic Function X X X X

Vacuum Leak Test X X X X

Vacuum Feature X X X X

Refrigerant & Oil Database optional optional optional

Refrigerant Charging high/low high/low/both high/low/both high/low/both high/low/both

Multilingual Display X X X X X

Refrigerant Mgmt System X X X X X

Automatic Refrigerant Refill X X X X X

Automatic Oil Drain X X X X X

Automatic Air Purge X X X X X

• Over 35 years ago, Robinair began leading the way when it introduced the first refrigerant recovery and charging station (1979)• Performance - Robinair A/C RRR machines are better at getting more refrigerant out of the vehicle and more accurate

when charging a vehicle saving users money on refrigerant and eliminating customer complaints due to poor A/C machine performance.

• Choices – Robinair offers the most complete line of A/C RRR products in the industry.• Endorsements – Robinair A/C RRR machines have become the machines of choice for most OEMs selling vehicle’s

in North America.• Service – Robinair offers a complete service network that’s made up of highly trained technicians who have worked on Robinair

products for an average of 10 years. With over 240 locations in North American it’s the most complete service network available.

The ROBINAIR Advantage

Air Conditioning Service EquipmentROBINAIR 34288 Economy• Combines simple operation with superior accuracy

#04096#02999

ROBINAIR 34988 Elite• Fully automatic recovery, recycle, recharge machine -

program the unit to: recover, vacuum, leak test and charge

ROBINAIR 34788NI and 34788NI-H • Fully automatic• 98.5% recovery efficiency

ROBINAIR AC1234-6• The first machine to meet SAE’s requirement for

recovering, recycling and recharging A/C systems that use the new R1234YF refrigerant

(for Hybrid vehicles)

Scan with QR reader to learn more.

COMPATIBLE

COMPATIBLECOMPATIBLE



2

ALLIGATOR Premium TPMS Snap-In Valve• 80 PSI maximum cold inflation pressure• 130 MPH maximum speed rating

exclusively from Myers Tire Supply

MYERS 360 TPMS Starter Kit

powered by Ateq

• Customized with the TPMS solution that fits the needs of your shop• Detailed display for precise product selection• Exclusive conveyor delivers sensors safely to the pick-up shelf

Holds up to 24 SKU’s. 240 total pieces.Dimensions - 38.75” high x 33” wide x 20.12” deepwith stand - 69.5” high, 120 v. 1 phase, 60 Hz, 1 amp.

MTS Xpress for TPMS

“ These devices bring accountability into the system that we didn’t have before”

– Roland Chartier, Richmond Ford

(cap, core, grommet and nut)

It is essential to service the TPMS valve assembly whenever a tire is removed. This simple procedure will ensure the TPMS system will operate as intended by the OEM. Replace all the critical valve components for clamp-in installations, and replace the entire rubber valve for snap-in applications with one easy service kit package. #27184

Covers a majority

of vehicles on

the road today!

ALLIGATOR TPMS Service Kit Package

Includes:• 68 service kits• 16 valves• Application chart

Starter Kit Includes:(1) Myers 360 TPMS Tool powered by ATEQ #27183(12) sens.it programmable TPMS sensors (4) sens it 315 Mhz sensors with ball joint valve #21250

(4) sens it 315 Mhz sensors with snap-in valve #21251

(2) sens it 433 Mhz sensors with ball joint valve #21252

(2) sens it 433 Mhz sensors with snap-in valve #21253

(1) TIA TPMS Relearn Chart rebate voucher (27165)

Myers 360 TPMS Starter Kit combines Alligator OE-quality valves, the easy-to-program sens.it TPMS programmable sensors covering over 97% of vehicles on the road today, and a trusted TPMS tool powered by ATEQ.

An affordable TPMS solution to: - Start servicing TPMS - As a back-up tool when the workload requires it - Test sensor before the vehicle pulls in the shop

$580.00 $1,695.00Only Only

#27183KIT#27178HUFKIT

(48) HUF IntelliSens universal programmable TPMS sensors (4) 433 MHz sensors with clamp-in valve, Myers # 23720

(12) 315 MHz sensors with clamp-in valve, Myers # 23738

(12) 315 MHz sensors with snap-in valve, Myers # 23722

(12) 433 MHz sensors with clamp-in valve, Myers # 23719

(8) 433 MHz sensors with snap-in valve, Myers # 23739

Offer ends April 30, 2016

Limited time promotional kit contains:(1) ATEQ VT56 TPMS Diagnostic Tool,

OBD II cable, One year of software updates

The combination of the industry-leading TPMS tool and Huf OE equivalent multi-protocal IntelliSens sensor can activate sensor to a vehicle make, model year in only 3 seconds!

TPMS Tool and Sensor Promotional Kit

• TPMS sensors• TPMS valves• TPMS service kits

• Tire gauges• Specialty tire valves

• Tire marking crayons

Ideal solution for storing and tracking:

#21060

Recommended torque for T-10 screw is 17.7 inch pounds.

Patented anti-rotation lip snugs the valve to the rim preventing the sensor/valve from spinning and breaking in the wheel.

T10 Screw and self-tapping threads prevent the screw from backing out

The ring around the valve 1/4" from the threads indicates it is a TPMS valve

Offer ends April 30, 2016over $1,000 when purchased separately!

over $3,000 when purchased separately!

Eliminate waste, increase productivity and improve cash flow!

Super sealing valve cap keeps out dirt and moisture preventing slow leaks

COMPATIBLE

Look for the icon!

COMPATIBLE

Your Partner for TPMS Solutions



3

SCHRADER Single Sensor EZ-sensor • Combines 314.9, 315 and 433 Mhz applications

into ONE Sensor• Replicates OE functionality• Achieves OE quality requirements• Covers over 92% of TPMS equipped vehicles• Future proofed to support new and pending OE system technologies

Order No. Description Freq.

21620 Schrader 33000 EZ Sensor with Snap-In Rubber Valve 315 MHz

21231 Schrader 33200 Blue EZ-sensor with WAL and Snap-In Rubber Valve 433 MHz

21621 Optional Schrader Aluminum Valve

Order No. Description Freq.

21623 Schrader 33500 Single Sensor 314.9, 315 and 433 MHz

SCHRADER EZ-sensors• Sensor is blank until programmed• Program the sensor and the car with the same tool

#21231

#21620

Order No. Mfr. No. Description Freq.21700H DVT-1001H GM TPMS Sensor 314.9 and 315 MHz21701H DVT-1002H Ford/Chrysler TPMS Sensor 315 MHz21702 DVT-1003 Ford/Chrysler TPMS Sensor 433 MHz21703 DVT-1004 Toyota/Nissan TPMS Sensor 315 MHz21704 DVT-1005 Honda TPMS Sensor 315 MHz21705 DVT-1006 Hyundai/Kia TPMS Sensor 315 MHz21706 DVT-SV-1 Snap-In Valve for DVT Sensor21707 DVT-CV-1 Clamp-In Valve for DVT Sensor

DVT Pre-Programmed Sensors• Six sensors and two valves for over 80% coverage• Dual Valve Technology, rubber snap-in and metal clamp-in valves use the same sensor• Install out of the box, complete the relearn and done• Compatible with all TPMS activation/scan tools

#21700H#21701H#21702

#21633

#21631 #21630

#21093 #21094

Order No. Mfr. No. Description Freq.21630 7001HP Redi-Sensor 315 MHz21631 7004 Redi-Sensor 433 MHz21632 7002 Redi-Sensor 315 Mhz21635 7003 Redi-Sensor Adjustable Valve Stem Design 315 Mhz21633 7001HP-R Redi-Sensor with Rubber Stem 315 MHz21634 VS-80 Replacement Rubber Valve For Redi-Sensor21111 7020K TPMS Service Kit - includes cap, core, grommet and nut

DILL Pre-Programmed Redi-Sensor• Works with all major TPMS scan tools• 315 and 433 MHz frequencies covers over 90% of GM, Ford and Chrysler• Ready to install, no programming required• 21632 Fits most, Toyota, Lexus, Scion, Honda, Kia and Hyundai• 21635 Fits Volkswagon, Mercedes-Benz, Audi, Lexus, Volvo, Toyota, Nissan, Infiniti, Chevrolet, GMC, Hummer, Isuzu and Subaru

#21111

• Now come pre-assembled for your convenience – no need to order valves and sensors separately

• Only 4 sensors cover 97% of all TPMS equipped vehicles

• Sensors are tested in the U.S.A. to ensure sensors function properly

• WAL (wireless auto location) compatible on all 433 Mhz sensors

Programmable Sensor Options

Pre-Programmed (Multi-Protocol) Sensor OptionsProgrammable with multiple applications pre-loaded to enable sensor activation in

only 3 seconds!

Original Equipment Sensor Options

Order No. Mfr. No. Description Freq. Valve Type23719 UVS4010 Universal Sensor 433 MHz Clamp-in

23720 UVS2000 Universal Sensor 433 MHz Clamp-in



23739 UVS4011 Universal Sensor 433 MHz Snap-in

23722 UVS3011 Universal Sensor 315 MHz Snap-in

• Cover multiple vehicles with one original equipment equivalent sensor• Over 87% coverage when combined with HUF OE sensors below• Re-programmable as well as copy/clone

functionality ideal for winter tire change-over• WAL (wireless auto locate) for quick

and easy tire rotations

Order No. Mfr. No. Freq. Valve Type Original Equipment Vehicles

23700 RDE001V21 433MHz Clamp-in Alfa Romeo, Audi, Bentley, Ferrari, Maybach, Maserati, Mercedes-Benz, Porche, Volkswagon

23701 RDE002V21 433MHz Clamp-in BMW

23702 RDE003V21 433MHz Clamp-in BMW, Land Rover

23703 RDE004V21 315MHz Clamp-in Audi, BMW, Maybach, Mercedes-Benz, Porche, Volkswagon

23704 RDE005V21 433MHz Clamp-in Ferrari, Porsche, Volkwagen

23705 RDE008V21 433MHz Clamp-in BMW, Mini

23706 RDE009 433MHz No Valve ITEC, Nova Bus, Prevost, Volvo

23707 RDE011V21 433MHz Clamp-in Audi, Bentley, Ferrari, Lamborghini, Maserati, Porsche, Volkswagen

23708 RDE012V21 433MHz Clamp-in BMW, Mini, Rolls-Royce

23709 RDE013V21 433MHz Clamp-in Volkswagon

23710 RDE014V21 315MHz Clamp-in Ford, Lincoln, Mazda, Mercury

23711 RDE015V21 315MHz Clamp-in Ford, Lincoln

23712 RDE016V21 315MHz Clamp-in Ford, Lincoln, Mazda, Mercury, VPG


23714 RDE018V21 433MHz Clamp-in Porsche, Volkswagen

23715 RDE019V21 315MHz Clamp-in Hyundai, Kia

23716 RDE020V21 315MHz Clamp-in Hyundai, Kia

23717 RDE021 433MHz No Valve Mercedes-Benz Truck

23718 RDE022V21 315MHz Clamp-in Audi, Porsche, Volkswagen

23736 RDE023V41 315MHz Snap-in Ford, Lincoln, Mazda, Mercury, VPG


HUF Original Equipment Sensors• Original equipment on many European vehicles as well as others

#23719#23720

#23721#23738

#23722#23739

#21621

sens.it

Order No. Description Freq. Valve Type21251 sens.it sensor and valve 315 MHz Snap-in

21253 sens.it sensor and valve 433 MHz Snap-in

21250 sens.it sensor and valve 315 MHz Clamp-in


Pre-assembed sens.it sensors and valvesOrder No. Description Freq. Valve Type21241 sens.it sensor and valve 315 MHz Snap-in

21243 sens.it sensor and valve 433 MHz Snap-in



Bulk sens.it includes 12 assembled sensors and valves

#21703#21704#21705

#23740

#23741

Order No. Mfr. No. Valve Length Valve Color23740 RDV026 43mm Black23741 RDV027 43mm Grey

Additional valve options

DILL Original Equipment Sensors• Original equipment on many Asian vehicles as well as others

Order No. Mfr. No. Make Model Year21050 1041 Volkswagon Passat 2006-2008

21039 1042 Mercedes-Benz Sprinter 2007-2013

21056 1043 Dodge Grand Caravan 2008-2010

21040 1044 Volvo S60 2011-2014

DIL1045 1045 Land Rover LR4 2010-2014

21042 1049 Mercedes-Benz ML-Class 2007-2009

21093 1051 Dodge Avenger 2008-2014

21094 1052 Chrysler Town and Country 2004-2005

21014 1053 Volkswagon Jetta 2006-2011

21015 1054 Mercedes-Benz CLS-Class 2006-2011

21016 1055 Jaguar XK 2007-2014

21017 1056 Mazda Miata 2006-2015

sens.it now available pre-assembled and in bulk packaging!

SCHRADER Original Equipment Sensors• Original equipment on many domestic vehicles as well as others

Order No. Mfr. No. Freq. Valve Type Vehicle Make

21125 20153 315MHz Snap-in Buick, Cadillac, Chevrolet, GMC, Hummer

21070 20158 315MHz Clamp-in Buick, Cadillac, Chevrolet, GMC, Hummer

21121 20315 315MHz Snap-in Ford21136 28204 315MHz Clamp-in Nissan21137 28214 433MHz Clamp-in Mercedes21221 28308 315MHz Snap-in Chrysler21082 20107 315MHz Clamp-in Cadillac, Chevrolet, GMC28434 28434 433MHz Snap-in ChryslerSCH20398 20398 433MHz Snap-in Chrysler21135 28203 315MHz Snap-in Subaru21099 20115 315MHz Clamp-in Cadillac, Chevrolet, GMC21128 28981 315MHz Clamp-in Acura, Honda

21069 20161 315MHz Clamp-in Nissan

21084 20117 315MHz Clamp-in Cadillac, Chevrolet

21080 20028 433MHz Clamp-in Chrysler, Dodge, Isuzu, Jeep, Mitsubishi

21081 20096 433MHz Clamp-in Ford, Lincoln, Mercury21062 28291 433MHz Clamp-in Chrysler21071 20131 315MHz Clamp-in Cadillac, GMC, Hummer28206 28206 314.9MHz Snap-in GMSCH28385 28385 315MHz Banded Ford

Mfr. No. Make Model Year*2168 Tesla Model S 2014-2015

*5134 Volvo XC60 2014-2015

*5256 BMW 3-Series 2014-2016

*5328 Land Rover LR4 2013-2015

*5507 Kia Soul 2010-2013

*5508 Hyundia Elantra GT 2013-2016

*5510 Hyundia Genesis Sedan 2014-2016

*5511 Honda Crosstour 2010-2015

*5512 Acura RDX 2013-2015

*5513 Acura ILX 2013-2015

*5514 Acura TLX 2015-2015

*5555 Nissan Maxima 2012-2015

*5556 Nissan Altima 2013-2016

*5557 Nissan Sentra 2013-2015

*5558 Infiniti Q50 2014-2015

*5559 Nissan Rogue 2014-2016

*5775 Dodge Dart 2013-2016

*Use mfr. number when ordering

COMPATIBLE

TPMS sensors and valves

Your Partner for TPMS Solutions



4

Note: Install handle in the direction of desired camber change; out for positive, in for negative

SPECIALTY EZ Cam XR Camber Kits For Domestic/Import 2 Bolt Struts (Pair)• Designed for non-slotted struts• Allows positive and negative camber changes up to approximately 1.75°, depending on

vehicle, by replacing the upper OE strut/spindle bolt• Built-In adjuster for the life of the vehicle by turning the head of the bolt• Each kit contains 2 cam bolt assemblies, enough for both sides of the vehicle• Estimated installation time 1/2 Hour

Order No. Mfr. No. For Replacement Of Description73651 81240 10mm Bolts EZ Cam XR Camber Kit73652 81250 12mm Bolts EZ Cam XR Camber Kit73653 81260 14mm Bolts EZ Cam XR Camber Kit73654 81270 15mm Bolts EZ Cam XR Camber Kit73655 81280 16mm Bolts EZ Cam XR Camber Kit73656 81290 17mm Bolts EZ Cam XR Camber Kit

SPECIALTY 86250 Ford Adjustable Cam Nut Bracket

Allows easy camber and caster adjustments. No need to remove the OE bolt or stabilizer bar. One SKU covers a variety of vehicles. APPLICATIONS: 2004-2010 Ford F150; 2007-2010 Ford Expedition; 2006-2010 Lincoln Mark LT; 2007-2010 Lincoln Navigator.

Use kit to change caster and/or camber on the new F150, F250 (L/D), Expedition and Navigator. Replace the existing upper control arm mounting bolts with these cam bolts for caster/camber changes up to 2.0°. One kit covers both sides of the vehicle. Estimated installation time - .5 hr/side. APPLICATIONS: Ford: 1997 - up F150, F250 (L/D), 1997 - up 2WD and 4WD Expedition; Lincoln: 1997 - up 2WD and 4WD Navigator.

SPECIALTY 87385 F150/250 (L/D) 2/4WD Camber/Caster Kit Set of 4

The new Ford Explorer has a torsion bar suspension with limited caster and no camber adjustment. This kit provides up to 2° positive or negative camber/caster adjustment. Replace the O.E. upper control arm mounting bolts with the #87500 cam bolts for fast and efficient adjustment now and in the future. One kit covers both sides of the vehicle. Estimated installation time - 1/2 hr/side passenger side, estimated installation time - .7 hr/side driver side. APPLICATIONS: Ford: 1995 - up 2WD and 4WD Explorer, 1998 and up 2WD and 4WD Ranger; Mercury: 1995 - up 2WD and 4WD Mountaineer; Mazda: 1998 2WD and 4WD B-Series Pickup.

SPECIALTY 87500 Ford Explorer Camber/Caster Kit Set of 4

Order No. Mfr. No. Description72157 23180 Ford/Mazda 2 and 4WD Camber/Caster Sleeve Set -9 piece

Set #72157 contains one each of: 23181, 23182, 23183, 23184, 23185, 23186, 23187, 23188, 23199.

Widely used to adjust caster and/or camber on many Ford 2WD/4WD trucks. To install, loosen and remove upper ball joint pinch bolt. Remove top snap ring if one is present. Use #77880 or #88830 sleeve puller to remove the existing sleeve. To save time during alignment, use #23199 zero degree sleeve to determine initial readings, then install correct sleeve. Note: Sleeves adjust to a smaller degree on Ford 4WD light trucks. One sleeve covers one side of the vehicle. Estimated installation time - 1/2 hr/side. APPLICATIONS: Ford 2WD: 1987 and up F350, 1987-96 F150, F250 (L/D), 1989-90 Bronco II, 1992 and up E150, E250, E350. 1991-94 Explorer, 1989 -97 Ranger, 1999 and up F250, F350 Super Duty ; Mazda 2WD: 1991-97 Navajo, Pickup; Ford 4WD: 1990 Bronco II, 1991-94 Explorer, 1990 - 97 Ranger; Mazda 4WD: 1991-97 Navajo, Pickup.

SPECIALTY Ford 2 and 4WD Camber/Caster Sleeve Set 9-piece

Order No.

Mfr. No.

2WD Adj. Change

4WD Adj. Change

72456 23181 25° (1/4°) 20°72457 23182 .50° (1/2°) .40°72458 23183 .75° (3/4°) .60°72459 23184 1.00° (1°) .75°72460 23185 1.25° (1-1/4°) .90°72461 23186 1.50° (1-1/2°) 1.10°

Order No.

Mfr. No.

2WD Adj. Change

4WD Adj. Change

72462 23187 1.75° (1-3/4°) 1.25°72463 23188 2.00° (2°) 1.40°72817 23189 2.25° (2-1/4°) 1.60°72816 23190 2.50° (2-1/2°) 1.80°72921 23199 0.00° (0°) 0.00°

Order No. Mfr. No. Thickness Qty./Box 72827 35040 1/32" 672826 35041 1/16" 672830 35042 1/8" 6

SPECIALTY Tandem Truck Shims• Fast, accurate way to align front or rear axles

Changes thrust and toe when installed between the torque arm and the spring hanger.

I.H.C./Navistar Torque Arm Shim


Universal shims are installed at the ends of torque rods to change toe and/or thrust angles. APPLICATIONS: Freightliner, Hendrickson and Navistar.

Single Slot Tandem Truck Shims


Shims center the axle with the frame rails when used on the lateral link. Also adjust thrust angle and toe by placing between the spring hammer and spring.

Navistar Shim for "Corporate" 6x4 Air Suspension

Order No. Description59308 7600 Spring Compressor59313 764 Optional Portable Cart59314 761 Optional Bench Mount

BRANICK 7600 Strut Spring Compressor• Uniform spring compression• OEM approved

Provides up to 3,000 lbs of compression to handle even tough applications like the RAV4, F-150 and GM pickups/SUVs without the need for adapters. The multi-position spring hooks allows the flexibility to fit difficult coil spring configurations while its long handles

provide extra torque to make compression easier. Features a structural ring guard, better top nut clearance and a longer compression stroke.

CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts.

SPECIALTY Full Contact, Dual Angle EZ Shim™

• Corrects toe and camber with one shim

Order No. Mfr. No. Color Description72943 75200 Blue Dual Angle Shim72944 75400 Grey Dual Angle ShimSPC75600 75600 Yellow Dual Angle Shim72945 75800 Red Dual Angle Shim

Two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment changes within .03° toe and .10° camber.

Front Adjustment range: Camber/Caster ±1.50° Installation time: .3 hr per side Req.: 1 kit per wheel

SPECIALTY 86375 Replacement Front Alignment Plate and Cam for GM, Set of 2

A stock OE replacement cam/bolt kit for newer GM 1/2, 3/4,and 1 ton truck and van applications.

Front Adjustment range: Camber ±2.00°/Caster ±2.00°Installation time: .3 hr/side Req.: 1 kit per wheel

SPECIALTY 87520 Caster/Camber Kit for Nissan Set of 2

Designed to install in the lower control arms for camber and caster adjustment. They replace the original non-adjustable lower control arm bolts.

#59308

#73629

#72563#SPC86375

#72985

#72200

#59314

Set of 2

Set of 2

Optional bench mount

LOOK FOR THE MOST POPULAR PRODUCTS

COMPATIBLE

COMPATIBLE

COMPATIBLE

COMPATIBLE

COMPATIBLE



5

The latest vehicle data is pre-loaded with approximately 14,000 vehicle values and 3,000 vehicle specifications for auto and light truck applications. Standard software-animated tutorial guides, ROC-2 Point Comp, Push Mode, Fast 3 Point Comp and Skip ROC option- Cradle Adjust-Free Front Wheels Toe Adjust-Raised Vehicle Adjust readings. Includes roller cabinet (pre-assembled with all wiring and P.C. installed), 4 radio CCD sensors, sensor charging cradles, wheel clamps, cables, software, pedal depressor and steering clamp.

CORGHI Exact 70 CCD Wheel Aligner• Easily expands to truck service with optional heavy duty kit• Wireless CCD system with eight camera sensors• Mobile cabinet allows service to multiple bays• Standard auto/light truck software and hardware• Optional sensor lowering kits for low clearance vehicles• Warranty: 2 years parts, 1 year labor,

Free lifetime technical support

CHALLENGER AR4015EAO 15,000 lb. 4 Post Alignment Lift With Open Front• Compatible with the industry's latest imaging

alignment systems• 80" Rear recessed free-floating slip

plates offer a wide range of 4 wheel alignment capacities

• 14 Level locking positions for a variety of alignment and general duty services

• ALI/ETL Certified• Highest rise in the industry• Optional 210" wheel base

Order Number 59552Lift Capacity (Lbs.) 15,000Max. Wheelbase 1821⁄2"Max. 2 Wheel Align. 1661⁄2"Max. 4 Wheel Align. 88" - 158"Rise 78"Length Overall 20'9"Width Overall (Front/Rear) 11'10"/ 11'21⁄2"Inside of Columns (Front/Rear) 10' Between Columns 16' 3"Height of Columns (Front/Rear) 991⁄2" / 931⁄2" Width of Runways 20"Height of Runways 7"Width Between Runways (Min./Max.) 43"Minimum Bay Size 12' x 24'Speed of Rise (Sec.) 85Motor 2 hpShipping Weight (Lbs.) 4,800Power Requirements: 208V/230V

Include (2) rolling jacks with internal airline system, flush mount stainless steel turning radius gauges, rear slip plates, multi-position work steps, and automatic wheel stops.

Open front option

ROTARY ARO14EL2 Extra Long 14,000 Lb. 4 Post Alignment Lift With Open Front• 6" Higher rise provides more headroom and a more

comfortable work area• Improved lock design features fewer parts and simplified

design, for trouble-free operation• Non-Skid surface material is bonded to the

runway in paint process• Molded yoke caps keep debris away from yoke sleeves• Includes rolling jacks• Clearance holes allow the ramp chocks to clear yoke bolts

resulting in less noise on vehicle drive-over

Myers exclusive FREE VIN Code Reader and Dually Wheel AdapterA $1,719 value!Effective March 1 through April 30 2016

#59552 #50087

#51517

#59670ACAvailable options include:IR remoteHD Truck and Trailer Upgrade

$1,400 FACTORY REBATE

Additional Benefit Added!

Effective through June 30,2017

Underhood LED Work Light

Order No.

45517

Seymoure Lights

360ºmagnetic

12 1234

567891011

charge time

6 hours

12 1234

567891011

runtime

4 to 8.5 hours

rechargeable

1200 / 650

lumens

5.5 lbs

ac/dc

HOFMANN Geoliner 670AC Imaging Wheel Alignment System• High resolution imaging technology delivers speed and accuracy• AC400 clamps are lightweight, durable and impact resistant• Passive front and rear XD targets improve

durability with no electronics to damage• Turn the front wheels and access difficult adjustment

points while still displaying centered toe reading with EZ-TOE• Cross-diagonal measurements identify frame or structural damage

SpecificationsTire diameter: 19” - 39”Track width: 48” - 96”Wheel Base: 79” - 180”Printer: IncludedShipping weights: 445 lbsPower requirements: 120/230V 1Ph 50/60Hz

Under the vehicle

Magnetic ends

Order Number 50087Lift Capacity (Lbs.) 14,000Max. Wheelbase 215"Max. 2 Wheel Align. 204"Max. 4 Wheel Align. 164 3⁄4"”Rise 6' 61⁄2"Length Overall 23' 10"Width Overall 11' 81⁄2"Inside of Columns 9' 61⁄2"Between Columns 18' 3"Height of Columns 9' 11/16"Width of Runways 20"Height of Runways 7"Width Between Runways 43"Bay Size 15' x 28'Speed of Rise (Sec.) 65Motor 2 hpShipping Weight (Lbs.) 3905Power Requirements: 208V/230V



6

#04546

#04544

#04547

Order No. Mfr. No. Description04537 1242 12V PowerLuber Gun Kit with One Battery04538 1244 12V Power Lube Gun Kit with Two Batteries

Order No. Mfr. No. Description04495 1842 18V PowerLuber Kit with One Battery04496 1844 18V PowerLuber Kit with Two Batteries

LINCOLN 18 Volt PowerLuber• Electronically controlled two-speed motor delivers

10 oz. per minute at low pressure or a concentrated stream at high pressure

• 10 cartridges dispensed per charge• 7,500 PSI maximum output pressure

LINCOLN 12 Volt PowerLuber• Eliminate hand grease guns• 3 cartridges dispensed per charge• 6,000 PSI maximum output pressure

LINCOLN 20 Volt Powerluber• Electronically controlled two-speed motor reduces battery

load and maximizes grease output per charge • 12 to 15 cartridges dispensed per charge• High torque power-head delivers 10,000 PSI

maximum output pressure

Order No. Mfr. No. Description04598 1882 20V Lithium Ion PowerLuber Kit with One Battery04600 1884 20V Lithium Ion PowerLuber Kit with Two Batteries

Order No. Mfr. No. DescriptionMaximum PSI

04554 30-475 Lever Grease Gun 10,00004559 30-415 Pistol Grease Gun 6,000

#04554#04559

Grease Guns

Seven piece kit contains special quick-connect couplings. Heavy duty storage case.

LINCOLN Lube Accessory Kit• For use with all standard grease guns • Eliminates time required to un-thread and re-thread couplers

LINCOLN Impact Fitting Cleaner

Flushes the lubricant passages of dried or separated grease and eliminates the need to disassemble joints or replace fittings. Includes steel drive cylinder, hardened piston, safety shield, high pressure hose, spare drive seals and 5852 coupler.

LINCOLN Quick Connect Grease Injection Tool • Prevents bent and broken needles

Provides a way to apply lubricant in close-fitting and difficult-to-reach areas. The flexible line keeps hands away from the needle when working with the coupler. Attaches to all 3 and 4 jaw grease couplers. Includes a threaded protective cap.

Includes base1/4 Pint graduations. Use with 120 lb. original refinery container. 15" drum cover with 17" square, 4 caster roll-a-round base. 5' Hose, 25 3/4" pump tube length. Output: 1 pint per 7 strokes using SAE 90 Gear Lubricator at 70° F.

LINCOLN 535 Manual Gear Lube Dispenser• Smooth easy pumping action• Dispenses all types of gear lubricants even in the coldest of weather

LINCOLN Air Operated Portable Grease Pumps

Use with 120 lb. original refinery container. 50 to 1 pumping ratio. 20 cubic-inch displacement air motor requires no oiling during normal operation. Super-hard bushing and plunger resists abrasion, no packing to wear out. Double ballchecks in plunger for positive high pressure operation. Includes lubrigun, swivels, 7' hose and follower plate. Four caster base maneuvers easily in shop.

Order No. Mfr. No. Description04548 6917 Medium Duty Portable Grease Pump w/ Caster Base04511 917 Heavy Duty Grease Pump w/ 4 Caster Base

#04548

#04551

#04511

20 Volt

Lithium Ion Battery

18 Volt

Lithium Ion Battery

12 Volt

Lithium Ion Battery

COMPATIBLE

COMPATIBLE

OTR and Construction

Auto Dealership

Truck Fleet

Upgrade to a powerful and versatile battery operated PowerLuber



7

Sockets for Standard Passenger and Light Truck Wheels

Sockets for Standard Passenger and Light Truck Wheels with Locking Lug Nuts

Sockets for Custom Wheels

MTS Flip Socket Set • 1/2" drive• Set includes: 19mm, 21mm, 3/4", 13⁄16" & 7⁄8"• Standard and thin wall• Myers exclusive double ribbed design• Protective electro coating• Includes storage case

#01689

#04628

MTS No-Mar Socket Set• 1/2" drive• Set includes: 17mm, 19mm, 21mm, 13⁄16", 7⁄8", 1", 1 1⁄16"• Remove wheel nuts without scratching

the wheel or nuts• Protective poly sleeve and internal plastic insert

protects alloy wheels and decorative lug nuts

• Secure connection• Quick release

• Reduce vibration

#01681 #01682

#01201

#45519

#45512

#45518

MTS 1/2" Drive 40 Piece Metric Impact Socket Set• Includes: 9mm - 24mm, 26mm, 27mm, 30mm standard and deep length,

universal joint, 5" extension

MTS Locking Lug Nut Set• Designed to remove locking lug nuts on aftermarket wheels• Sixteen-piece set includes eight sockets and 8 keys conveniently

packaged in a durable case for easy storage• Thin wall and extra long to fit a wide range of wheels• Double hex head design fits both a 13⁄16 inch or 7⁄8 inch socket• Made of heat-treated chrome vanadium steel for added strength

#01607

Quick Release Extension

Optional extensions

COMPATIBLE

MTS Sockets are

• COB SMD technology provides ultra bright white light for high illuminosity with less glare and fatigue

• Magnetic enables light to be hung on metal surfaces for hands-free convenience

• Fold-away swivel hook allows light to be hung from underneath vehicle and folds out of the way when not in use

• Rechargable for cord-free convenience

Rechargeable High Power LED Work Light• COB SMD technology provides ultra bright white light for high illuminosity with less glare and

fatigue • Long and wide angle provides ultra bright illumination over a wide work area• Non-slip ergonomic handle with rubberized housing for increased comfort and slip resistance• Magnet on back enables light to be hung on metal surfaces for hands-free convenience• Fold-away swivel hook allows light to be hung from underneath vehicle and folds out of the

way when not in use • Rechargable for cord-free convenience

LED Pen-Style Flashlight

5 1/4" length

• LED light for bright non-glare illumination of work area

• Focused beam provides intense light for inspection• Pen size fits easily in a pocket or pouch• Anodized aluminum casing is heavy duty yet

light-weight• Anti-roll pocket clip helps light stay in place• Push button tactical switch for easy

one-handed operation

Portable Light with Magnet Base

USB port for charging portable devices

360º

12 1234

567891011

charge time

4 hours

12 1234

567891011

runtime

4 hours230

lumens

1 lbs

ac/dc

Specifications

Order No. Description01604 MTS 1/2" Drive 14 Piece Metric Deep Impact Socket Set01602 MTS 1/2" Drive 13 Piece SAE Deep Impact Socket Sets

Additional SAE and metric impact socket sets also available



8 ©2016 Myers Tire Supply #15247 30M 2/16Myers Tire Supply is a registered trademark of Myers Tire Supply Distribution Inc.

SOLUTION CENTRAL Tips and hints for your business

Wheel and Rim Installation

Remove debris from the mating surface to reduce joint settling.

Remove debris from the mating surface to reduce joint settling.

Inspect components Worn fasteners result in insufficient clamping force.

Inspect components Worn fasteners result in insufficient clamping force.

Snug the fasteners to ensure the wheel is evenly sealed on the hub or drum.

Snug the fasteners to ensure the wheel is evenly sealed on the hub or drum.

Torque to specification in a star pattern to ensure correct clamping force.

Torque to specification in a star pattern to ensure correct clamping force.

Remove debris Inspect componentsSnug the fastenersTorque to specification

Passenger and Light Truck Applications

Heavy-Duty Truck Applications

Clean the mating surface

#17000 / #17018

#22627

#02010

Order No. Description02571 MTS Thread Test - M12-1.2502572 MTS Thread Test - M12-1.502573 MTS Thread Test - 1/2in-20 UNF

#73398

Clean the threads

Order No. Description17000 Shark 2" Course Surface Conditioning Pads17018 3M 2" Course Surface Conditioning Pads22627 Hub Buddy Lug/Hub Surface Cleaner22628 Hub Buddy Replacement Discs - 6 pack

Inspect the components

Check the threads

Order No. Description04920 9 pc. Save-A-Stud Rethread Kit04210-04232 Qwikline Thread Chasers 73398 Wheel Stud Thread Gauge Set

Repair threads or replace the stud

#04920 Qwikline

Hand tighten lug nuts and snug in a star pattern

Order No. Description02760 Torque Bar with Built-In Socket - 10 Pc. Kit

01679 Torque Bar Extension - 5 Pc. Kit

Torque Bars - Accurate

Torque Wrench - Most Accurate

Order No. Description07152 MTS 1/2" Drive Preset Torque Wrenches 80 lb.

02990 2015 Laminated Torque Chart

07179 Click Type Torque Wrench, 1/2" Dr

Clean the mating surface

#64027

#02010

Clean the threads

Order No. Description

17000 Shark 2" Course Surface Conditioning Pads

17018 3M 2" Course Surface Conditioning Pads64020-64025 Bolt Hole Cleaners

64023 Bolt Hole Brush

#64011

#64010

Order No. Description02570 MTS Thread Test M22-1.5

Inspect the components

Check the threads

Order No. Description04918 3 pc. Save-A-Stud HD Kit04220-04234 Qwikline Thread Chasers

Repair threads or replace the stud

#04918

Qwikline

#02570

Hand tighten lug nuts and snug in a star pattern.

Order No. Description02632 1" Torque Bar 475 ft. lbs

02617-02630 3/4" and 1" Truck Torque Bars

Torque Bars - Accurate

Order No. Description07182 Torque Wrench, 3/4" Dr., 100-600 ft. lbs.

07194 Torque Wrench, 1" Dr., 200-700 ft. lbs.



07202 Torque Wrench, 3/4" Dr., 200-750 ft. lbs.

07191 Torque Wrench, Pneutorque

Torque Wrench - Most Accurate

#07191Great for fleets and bus garages

Hub Piloted Wheels1

10

3

5

72

9

4

6

8 1 3

4 2

76

58

Stud Piloted Wheels1

10

3

5

72

9

4

6

836

1

2

54

#45519#45512

#17000 / # 17018

Ask us about our full line of wheel nuts and studs

#72805 Skirt Nut

#72736 Inner Cap Nut

Ask us about our full line of wheel nuts and studs

R.I.S.T.

1

23

4

5

#64023

TIPS: There are a number of factors that determine how much clamping force is generated per foot pound. Following the RIST procedure significantly reduces chances of a loose wheel or wheel-off accident.

#45519#45512

product pulse - myers tire supply

Documents