product range commercial/industrial...6 pro-pac 140h water heating hot water heat pumps features hot...

P R O D U C T R A N G E

CO M M E R C I A L / I N D U S T R I A LHeating, cooling, dehumidification, ventilation

A B O U T T H E D A N T H E R M G R O U P

Control your climate

The Dantherm Group is a leading provider of climate control products and solutions. The group companies have more than 60 years of experience in designing and manufacturing high quality and energy efficient equipment for heating, cooling, drying and ventilation for a wide range of mobile and fixed applications.

Every year Dantherm Group uses significant resources on product development to stay in the forefront and are constantly adapting the products to changing market demands and legislation.

The Dantherm Group has strong brands with well-established market positions in the mobile, pool, commercial/industrial and residential markets.

Dantherm Group customers benefit from our comprehensive knowledge base and the experience and expertise that we have gained from more than three million climate control

products and solutions sold worldwide.

Global reach

The Dantherm Group is headquartered in Skive, Denmark and has companies in Norway, Sweden, United Kingdom, Germany, France, Switzerland, Italy, Spain, Poland, Russia, China and United Arab Emirates and a global distribution network.

In 2016 the Dantherm Group was acquired by the Swedish equity fund Procuritas Capital Investors V LP – a strong owner with the ambition to continue the development and growth of the company.

2

Direct gas heater

Wall mounted/floor standing ....................................................................................... 4

Indirect oil heaters

Floor standing ......................................................................................................................... 5

Water cooling

Commercial .............................................................................................................................. 9

Air cooling

Stationary air coolers (axial fan) ................................................................................ 11

Stationary air coolers (radial fan) .............................................................................. 12

Remote climate controls

Supermaster SM 4.0 ......................................................................................................... 13

Electronics cooling

Telecoms free cooling .................................................................................................... 14

High-capacity free cooling .......................................................................................... 17

Displacement free cooling .......................................................................................... 18

DC air-conditioning ......................................................................................................... 19

DC split air-conditioning ............................................................................................... 20

Air vent weather protection ....................................................................................... 21

Electronics cooling controls

Remote climate control ................................................................................................. 23

Dehumidifiers

Wall mounted ...................................................................................................................... 24

Wall mounted/floor standing .................................................................................... 29

High capacity dehumidifiers

Floor standing ...................................................................................................................... 30

Drying cupboards ............................................................................................................. 34

Ducted...................................................................................................................................... 36

High temperature process drying

Floor standing ...................................................................................................................... 39

Industrial drying

Adsorption ............................................................................................................................. 40

Commercial air handling units

WD general ............................................................................................................................ 49

WD healthcare ..................................................................................................................... 50

WD packaged heat recovery ...................................................................................... 51

CO M M E R C I A L / I N D U S T R I A L

CO M M E R C I A L / I N D U S T R I A L

I N D E X

TO DRY

TO COOL

TO HEAT

3

TO CONTROL

TO CONTROL TO VENTILATE

4

D I R E C T G A S H E AT E R

WA L L M O U N T E D / F LO O R S TA N D I N G

Applications

� Industrial applications

� Indoor or outdoor

� Agriculture

Features

� Designed for indoor and outdoor

� Can be placed on the floor or hanged on the ceiling

� Galvanized steel combustion chamber

� Reliable twin spark ignition

� Natural gas or LP gas burner

� High efficiency heat exchanger

� Overheat thermostat

� Closed motor to assure safe, dependable even in harsh environments

� Galvanized steel body

C F 75 S PA R K

Specifications Units CF 75 SPARK

Heating power

kW 75Btu/h 64500

kcal/h 255900Air displacement m3/h 2100Thermostat control OptionalFuel consumption (LPG) m3/h 2.3Fuel consumption (natural gas) m3/h 8.0Electric power kW 0.5Power supply V/Hz 220-240/1ph/50Rated current A 2.8Product size (l x w x h) mm 788 x 464 x 719Weight kg 57

Optional accessories

Included

Diverter Kit to transform LPG into NATURAL GAS

Analog thermostat TH5 with cable3m, 10m

Digital thermostat THD with cable5m, 10mfor heaters made in Jul 2015 or later

Kit for oudoorgalvanized

Bracketsgalvanized

5

TO

HE

AT

I N D I R E C T O I L H E AT E R S

F LO O R S TA N D I N G

Applications

� Industrial applications

� Sport facilities

� Workshop and warehouse space heating

Features

�Large built-in oil tank with filter

�Integrated burner with electronic flame control and photocell cut-off

�Fan limit thermostat with automatic reset

�Summer-winter switch for ventilation only

�Centrifugal fan

�Stainless steel combustion chamber

�Excellent heat insulation with detachable panels

�Wide inspection doors for easy cleaning

�Built in thermostat

B F 35B F 75

Specifications Units BF 35 BF 75

Heating power

kW 29.1 60.1Btu/h 99300 205070

kcal/h 25050 51680Air displacement m3/h 2800 5300Fuel Oil OilFuel consumption l/h 2.8 5.9Electric power kW 0.245 0.560Power supply V/Hz 230/1ph/50 230/1ph/50Flue tube Ø mm 120 150Product size (l x w x h) mm 1050 x 460 x 1600 1220 x 540 x 1700Weight kg 132 173


Stainless steelexhaust-pipe 1mØ 120mm – BF 35Ø 150mm – BF 75

Stainless steelexhaust elbow 90°Ø 120mm – BF 35Ø 150mm – BF 75

Stainless steelchimney potØ 120mm – BF 35Ø 150mm – BF 75

6

P R O - PAC 140 H

WAT E R H E AT I N G

H OT WAT E R H E AT P U M P S

Features

�Hot water production to 68°C

�Space heating through fan coils, radiators, underfloor system

�Heat recovery from soil, rivers, lakes and chilled water systems

�Space cooling as a by product of the heating process

�Up to 400% running cost and carbon savings against electric heating

�Up to 48% running cost and carbon savings against fossil fuel system

�No flues or storage tanks

�Easy to retrofit

�Minimal service requirements

�Certified cupronickel WRAS approved heat exchanger to allow the unit to be used in a direct system with potable water

�Range of capacities from 6kW to 140kW

�R134a ozone friendly refrigerant ensures reliable operation up to 68 oC

�Fully weatherproof polyester or epoxy coated cabinet

�Quiet, efficient owlet axial fans

�Choice of centrifugal fans (34 range only) – allows ducting from plant rooms or distribution of cold air for space cooling

�Air source heat pumps for hot water up to 68°C during ambient temperature from 10°C to 50°C (-15°C to 50°C optional)

Applications

� Hotels

� Hospitals

� Clubs

� Leisure centres

AW 1234 H

For technical data see next page

Options

�Reverse cycle defrost allows operation down to -15oC (excluding 834,1234 and 1534)

�Soft start

�High pressure fans

7

TO

HE

AT



Specifications Units AW 834H AW 1234H AW 1534H

Air temperature rangeWater temperature range

Duty – output to water @ 30°C/55°COutput @ +25°C/55% RH ambientInput @ +25°C/55% RH ambient

Output @ +15°C/70% RH ambientInput @ +15°C/70% RH ambient


°C°C

kWkW

kWkW

kWkW

7-5010-68

7.5/7.11.5/2.3

6.7/6.01.4/2.1

5.8/5.21.3/2.0

7-5010-68

11.9/10.62.1/3.3

10.1/9.02.0/3.1

8.8/7.91.9/2.9

7-5010-68

15.1/13.52.7/4.3

12.8/11.42.6/4.0

11.2/10.92.4/3.8

Power supply

Minimum supply capacity

Recommended supply fuse

V/HzV/Hz

A (1ph)A (3ph)A (1ph)A (3ph)

230/1ph/50400/3ph/50

15.77.82513

230/1ph/50400/3ph/50

22.712.53220

-400/3ph/50

-13.7

-20

Nominal air flowExternal static (standard units)External static (uprated units)

m3/hPaPa

26500

150

32000

150

40000

Variable to 250Pa

Water flow ±10%Pressure drop (water)Water connections

l/minm hdinch

335.8

¾ BSPM

337.0

¾ BSPM

338.3

¾ BSPMFanCompressorCondenserSound pressure level @ 10mSound pressure level @ 3mProduct size (w x d x h)Weight

TypeTypeTypedB(A)dB(A)mmkg

1 x Centrifugal1 x Recip

4557

1060 x 705 x 807119

1 x Centrifugal1 x Scroll

4859

1060 x 705 x 807130

1 x Centrifugal1 x Scroll

5162

1210 x 755 x 807156

Specifications Units PRO-PAC 30H PRO-PAC 45H PRO-PAC 70H PRO-PAC 90H PRO-PAC 140H


Duty – output to water @ 30°C/55°COutput @ +25°C/55% RH ambientInput @ +25°C/55% RH ambient



°C°C

kWkW

kWkW

kWkW

7-5010-68

25.0/22.34.5/7.1

21.1/18.94.3/6.6

18.4/16.54.1/6.3

7-5010-68

31.2/27.85.9/9.1

26.3/23.65.6/8.5

23.0/20.65.3/8.1

7-5010-68

47.0/41.98.2/13.1

39.8/35.67.8/12.2

34.7/31.07.4/11.6

7-5010-68

62.3/55.511.7/18.2

52.7/47.111.1/17.0

46.0/41.110.6/16.1

7-5010-68

94.0/83.816.5/26.2

79.5/71.115.6/24.4

69.4/62.114.8/23.1

Power supplyMinimum supply capacityRecommended supply fuse

V/HzAA

400/3ph/502030

400/3ph/502230

400/3ph/503550

400/3ph/504460

400/3ph/5070

100Nominal air flowExternal static (standard units)External static (uprated units)

m3/hPaPa

55000

N/A

100000

60

140000

60

200000

60

280000

100Water flow ±10%Pressure drop (water)Water connections

l/minm hdinch

662.1

1½ BSPM

664.2

1½ BSPM

1303.9

1½ BSPM

1304.2

1½ BSPM

2605.3

1½ BSPMFanCompressorCondenserSound pressure level @ 10mSound pressure level @ 3mProduct size (w x d x h)Weight

TypeTypeTypedB(A)dB(A)mmkg

1 x Axial1 x Scroll

5464

1555 x 790 x 1080247

1 x Axial1 x Scroll

5565

1665 x 1060 x 1330329

1 x Axial1 x Scroll

5970

1810 x 1190 x 1310490

1 x Axial2 x Scroll

5565

2065 x 1190 x 1350632

1 x Axial2 x Scroll

5970

2210 x 1650 x 1340858

Cu tube in shell (WRAS approved Cu-Ni optional)

Cu tube in shell (WRAS approved Cu-Ni optional)

8



W W 604 B H

Features

�Hot water production to 68°C

� Space heating through fan coils, radiators, underfloor system

� Heat recovery from soil, rivers, lakes and chilled water systems

� Space cooling as a by product of the heating process

� Range of capacities from 20kW to 120kW

� R134a refrigerant – wide operating range

� Certified cupronickel WRAS approved heat exchanger to allow the unit to be used in a direct system with potable water

� High efficiency scroll compressors

� Acoustically lined cabinets

� High electrical and mechanical circuit protection

Applications

� Hotels

� Hospitals

� Schools

� Swimming pools

� Apartment buildings

� Nursing homes

� Large private houses

Specifications Units WW 304BH WW 604BH WW 1004BH WW 1254BH

Water temperature range HeatingSource water/brine @ 10°COutput to water @ 55°CElectrical inputOutput to water @ 35°CElectrical inputSource water/brine @ 15°COutput to water @ 55°CElectrical inputOutput to water @ 35°CElectrical inputCoolingSource water/brine @ 12°COutput to water @ 55°C sinkElectrical inputOutput to water @ 35°C sinkElectrical input

°C

kWkWkWkW

kWkWkWkW

kWkWkWkW

10-68

26.07.7

29.05.1

31.07.7

34.55.2

18.08.5

25.05.6

10-68

52.015.459.010.2

62.015.567.010.4

36.017.050.011.2

10-68

84.023.792.016.1

100.024.0

109.016.2

60.026.481.017.7

10-68

104.030.8

118.020.4

124.031.0

134.020.8

72.034.0

100.022.4

Power supplyMax. starting current (LRA)Min. supply capacityMax. supply fuseCompressor

V/HzAAA

Type

400/3ph/50102.023.632.0

1 x Scroll

400/3ph/50102.047.363.0

2 x Scroll

400/3ph/5096.079.2

125.04 x Scroll

400/3ph/50102.094.6

125.04 x Scroll

Source flow rate (±10%)Process flow rate (±10%)Water pressure drop (at rated flow)Process water temperature (max.)Water connections (Copper/PVC)

l/minl/minm hd

°Cinch

66.066.04.6

68.01½ BSPM

132.0132.0

4.668.0

1½ BSPM

264.0264.0

5.368.0

2 BSPM

330.0330.0

7.168.0

2½/2 BSPMSound level @ 1mRefrigerantProduct size (w x d x h)Weight

dB(A)

mmkg

68R134a

1665 x 1060 x 1310312

71R134a

1500 x 1500 x 1255625

75R134a

2250 x 1650 x 1215977

75R134a

2250 x 1650 x 12151100

9

TO

CO

OL

WAT E R CO O L I N G

CO M M E R C I A L

Features

�Domestic sizes giving up to 900 litres per hour of cold water production

�Fully packaged, robust and weatherproof construction

�Quiet operation

�Purpose-built for operation in the Gulf region

�Certified cupronickel WRAS approved heat exchanger to allow the unit to be used in a direct system with potable water

�Non ozone depleting refrigerant (R134a)

WA 1234 B C

Applications

�Hotels and clubs

�Offices

�Agriculture

Options

�Available in 60Hz

Cooling output and input calculated at +45°C/50% RH ambient air

Specifications Units WA 634ACL WA 634ACH WA 1234BC


Output @ 32°C waterInput @ 32°C water


°C°C

kWkW

kWkW

5-5010-40

5.51.9

2.81.4

10-5010-40

5.51.9

2.81.4

10-5510-40

9.83.2

5.92.5

Nominal cold water productionMin./max. tank size

l/hl

50060/500

50060/500

900110/1000

Electrical inputPower supplyMax. supply fuseStarting current

kWV/Hz

AA

1.9220-240/1ph/50

2032

1.9220-240/1ph/50

2032

3.2400/3ph/50

1648

Water flow ±10%Flow resistanceConnections

l/minmhdinch

332.1

¾ BSPM

332.1

¾ BSPM

332.1

¾ BSPMNominal air flowFan external resistance (standard)

m³/hPa

150050

150050

300050

FanSound pressure level @ 3mProduct size (w x d x h)Weight

TypedB(A)mmkg

1 x Centrifugal63

820 x 702 x 762111

1 x Centrifugal63

820 x 702 x 762111

1 x Centrifugal65

1060 x 705 x 807157

10

Features

�Mono-block design with choice of in-built thermostat positions

�Fully packaged, robust and weatherproof construction

�Quiet operation

�Purpose-built for operation in the Gulf region

�Certified cupronickel WRAS* approved heat exchanger to allow the unit to be used in a direct system with potable water

�Non ozone depleting refrigerant (R134a)

* WRAS is a conformance mark that demonstrates that an item complies to strict standards set out by UK water regulations. This standard gives you peace of mind that approved products will not contaminate your water supply and are safe to use within their stated pressure and temperature ranges.

Applications

�Sports academies

�Sports training facilities

�Plunge pools

�Therapy pools

P R O - PAC 140

WAT E R CO O L I N G

CO M M E R C I A L

Options

�Available in 60Hz

Specifications Units PP 16BC PP 22BC PP 30BC PP 45BC PP 70BC PP 90BC PP 140BC




°C°C

kWkW

kWkW

10-5510-38

9.83.2

5.92.5

10-5510-38

12.44.1

7.53.3

10-5510-38

25.58.3

15.56.6

10-5510-38

30.010.0

18.28.0

10-5510-38

51.016.2

30.912.8

10-5510-38

59.920.0

36.616.0

10-5510-38

102.132.4

61.925.5

Power supplyMin. supply capacityRecommended supply fuseMax. starting current standard (LRA)Max. starting current soft start (LRA)

V/HzAAAA

400/3ph/5010164825

400/3ph/5013204825

400/3ph/5021309633

400/3ph/502540

10234

400/3ph/5042609633

400/3ph/505070

10234

400/3ph/5084

1259633

Nominal air flowFan external resistance (standard)

m3/hPa

40000

50000

55000

110000

140000

220000

280000

Water flow ±10%Pressure drop (water)Water connections

l/minm hdinch

334.2

1½ BSPF

334.2

1½ BSPF

662.1

1½ BSPM

664.5

1½ BSPM

1333.4

1½ BSPM

1664.5

1½ BSPM

2665.3

2 BSPMCompressorFanSound pressure level @ 3mProduct size (w x d x h)Weight

TypeTypedB(A)mmkg

1 x Scroll1 x Axial

481264 x 600 x 725

131

1 x Scroll1 x Axial

521264 x 600 x 725

145

1 x Scroll1 x Axial

621525 x 790 x 1080

219

1 x Scroll1 x Axial

641665 x 1060 x 1310

329

2 x Scroll1 x Axial

681810 x 1190 x 1310

549

2 x Scroll2 x Axial

702065 x 1190 x 1330

599

4 x Scroll2 x Axial

712210 x 1650 x 1340

1065

Cooling output and input calculated at +45°C/50% RH ambient air

11

TO

CO

OL

Features

� Axial fan

�Made of robust UV resistant plastic

�LCD remote control with 7.5m cable

� Infrared remote control

�12 speed fan, adjustable

�Long life cooling pads

�Automatic – self-cleaning, self-drain, self dry when the cooler is inactive

�Included external filter

�Prevention system against Legionella, algae, fungi, etc.

A I R CO O L I N G

S TAT I O N A RY A I R CO O L E R S ( AX I A L FA N )

B OT TO M ( D O W N ) E X I T

Specifications Units BCF 230AB BCF 231AB BCF 230AL BCF 231AL

Cooling pad dm3 220 220 170 170Cooling pad cm 79 x 70 x 10 79 x 70 x 10 79 x 70 x 10 79 x 70 x 10Air displacement m3/h 18000 18000 18000 18000Max. air pressure Pa 200 200 200 200Max. area m2 250 250 250 250Fan Type 1 x Axial 1 x Axial 1 x Axial 1 x AxialFan speed 12 12 12 12Power consumption kW 1.1 1.1 1.1 1.1Power supply V/Hz 230/1ph/50 230/1ph/50 230/1ph/50 230/1ph/50Air exit mm Bottom (down) Bottom (down) Lateral LateralTank capacity l 40 40 40 40Protection IP54 IP54 IP54 IP54Water consumption l/h 10-15 10-15 10-15 10-15Remote Control Integration SM 4.0 No Yes No YesSound level dB(A) 67 67 67 67Water input/drain inch 1.2 and 1 1.2 and 1 1.2 and 1 1.2 and 1Dimensions air exit cm 65 x 65 65 x 65 65 x 65 65 x 65Dimension air exit (diameter) cm 61 61 61 61Product size (l x w x h) mm 1100 x 1100 x 960 1100 x 1100 x 960 1100 x 1100 x 960 1100 x 1100 x 960Weight kg 76 76 76 76

Applications

�Industry and warehouses

�Agriculture and restaurants

L AT E R A L E X I T

Remote LCD control with 7.5m cableInfrared remote control

Included with all BCF stationary air coolers

B C F 230 A B B C F 231 A B

B C F 230 A LB C F 231 A L

Models BCF 231AB, BCF 231AL, BCF 231RB are made in Italy and integrated with SM 4.0 controller.

12

A I R CO O L I N G

S TAT I O N A RY A I R CO O L E R S ( R A D I A L FA N )

Features

�Radial (centrifugal) fan for better air pressure

�Made of robust UV resistant plastic

�LCD remote control with 7.5m cable

� Infrared remote control

�12 speed fan, adjustable

�Long life cooling pads

�Automatic – self-cleaning, self-drain, self dry when the cooler is inactive

�Included external filter

�Prevention system against Legionella, algae, fungi, etc.

B C F 230 R BB C F 231 R B

B OT TO M ( D O W N ) E X I T

Specifications Units BCF 230RB BCF 231RB

Cooling pad dm3 220 220Cooling pad cm 79 x 70 x 10 79 x 70 x 10Air displacement m3/h 18000 18000Max. air pressure Pa 300 300Max. area m2 250 250Fan Type 1 x Radial 1 x RadialFan speed 12 12Power consumption kW 1.5 1.5Power supply V/Hz 220-240/1ph/50 220-240/1ph/50Air exit mm Bottom (down) Bottom (down)Tank capacity l 40 40Protection IP54 IP54Water consumption l/h 10-15 10-15Remote Control Integration SM 4.0 No YesSound level dB(A) 67 67Water input/drain inch 1.2 and 1 1.2 and 1Dimensions air exit cm 65 x 65 65 x 65Dimension air exit (diameter) cm 61 61Product size (l x w x h) mm 1100 x 1100 x 960 1100 x 1100 x 960Net weight kg 94 94

Optional accessories for all BCF stationary air coolers

Ventilation duct 680x650L = 500L = 750L = 1000L = 1500

Ventilation elbow90° 650 x 650R150

Ventilation elbow45° 650 x 650 R150

Anti-vibration connector650 x 650

Diffuser 2-way outlet(2 x 600 x 500)Diffuser 4-way outlet(4x 600 x 300)

Remote Control Integration SM 4.0 Controls up to 31 units BCF 231

Applications

�Industry and warehouses

�Agriculture and restaurants

13

TO

CO

NT

RO

L

R E M OT E C L I MAT E CO N T R O L S

S U P E R M A S T E R S M 4.0

Features

�The most advanced coolers controller on the market

� It can control up to 31 units of Master BCF 231

�Easy to use centralized control panel

�All main cooler’s functions can be set up via cloud on laptop or smartphone

�Very useful when coolers are difficult to reach or you need to control more than one unit

Controller

�The application allows to make the settings for each cooler separately or for groups of coolers

�Each cooler can have a status – offline, standby, running and fault

� The coolers which are installed and active are checked with white frame

�They can be grouped in smaller zones with the same settings which allows easy control

�Each zone is indicated by different colour – easy to find to which zone a specific cooler belongs

Actions include

�Setting a local and target humidity and temperature

�Checking the fault code – allows to easy control the failures during operation

�Checking the water tank level

� The Ampere box shows the instant current of the cooler. It is very useful for installation and for trouble shooting.

� The settings can be made for one single cooler or for the group of coolers in the same area

From the cooler panel you can

�Set a timer and a weekly planner

�Set the cooler’s functions: to cool, to ventilate, to exhaust, to swing, to clean

�Select fan speed motor and then the air flow as well

SM 4.0 start panel – protected by the password and available in two languages – English and Italian

You can set and check all parameters for each unit separately

14

E L E C T R O N I C S CO O L I N G

T E L E CO M S F R E E CO O L I N G

Features

�Extremely energy-efficient – savings in all types of climates

�Total heat management – control of multiple external units

�Stable operation – step-less fan speed control

�Clean internal environment – overpressure system

�Extended air path protection – Dantherm AirMaze

�Flexible installation – outdoor only

�Low maintenance costs – washable compact filter

�Maximum security – remote monitoring and configuration

F L E X I B OX 460

Applications

�Radio base stations

�Telecom shelters

�Electronics enclosures

�Power supply rooms

�Network and computer rooms

�Drive stations

�Automation control cabinets

�Hybrid Telecom sites

�DC powered sites

Controller

�Dantherm CC4 – 48V DC controller, integrated in the unit

�Control of external air-conditioning unit(s)

�Control of external heater

�Control of motorised damper(s)

�Communication port RS 485, Modbus protocol

�Filter monitor

Specifications Units 48V DC (EC fan)

Nominal air flow m3/h 1334Nominal cooling capacity in W/K (Δt = 1°C) W/K 400Nominal fan power consumption (at 80% fan speed) W 63Sound level @ 1m dB(A) 54Fan nominal voltage DC 48V DC (42-57V DC)Maximum air flow m3/h 1488Maximum cooling capacity W/K 466Maximum current A 2.0Maximum power consumption W 93Product size (h x w x d) mm 758 x 455 x 500Weight kg 24

15

TO

CO

OL



Features






�Flexible installation – both indoor and outdoor



Applications


�Telecom shelters




�Drive stations



�DC powered sites

F L E X I B OX 810 I N D O O R

F L E X I B OX 810 O U T D O O R

Controller

�Dantherm CC4 – 48V DC controller, integrated in the unit

�Control of external air-conditioning unit(s)

�Control of external heater

�Control of motorised damper(s)

�Communication port RS 485, Modbus protocol

�Filter monitor

Specifications Units FLEXIBOX 810 INDOOR 48V DC (EC fan)

FLEXIBOX 810 48V DC (EC fan)

Nominal air flow m3/h 2052 2052Nominal cooling capacity in W/K (Δt = 1°C) W/K 697 697Nominal fan power consumption (at 80% fan speed) W 222 222Sound level @ 1m dB(A) 62 62Fan nominal voltage DC 48V DC (42-57V DC) 48V DC (42-57V DC)Maximum air flow m3/h 2333 2333Maximum cooling capacity W/K 782 782Maximum current A 6.1 6.1Maximum power consumption W 329 329Product size (h x w x d) mm 600 x 455 x 490 758 x 503 x 500Weight kg 25 25.5

16



Features






�Flexible installation – both indoor and outdoor



F L E X I B OX 900 I N D O O R

Applications


�Telecom shelters




�Drive stations



�DC powered sites

F L E X I B OX 900 O U T D O O R

Controller

�Dantherm CC 3000 48V/230V – Dantherm developed, wall mounted

�Flexible configuration – live monitoring and configuration on any standard browser

�Energy-saving strategy – max. use of controlled ventilation

�Intelligent climate control – automated change of cooling mode


�User-friendly configuration – built-in SD card reader and digital colour display

�Service minimization – digital filter status detector

�Strategy evaluation/planning – complete data logging

�Communication: MODbus TCP/IP

Specifications Units FB900-48V-G4 FB900-230V-G4

Operating temperature range °C -25 - +55 -25 - +55Cooling capacity @ 25°C at Δt=10°C, 50/80% W 4950/7210 5370/8340Maximum cooling capacity at 25°C ambient, Δt=10°C, 100% W 8140 8610Sound level 50/80% @ 3m dB(A) 47/56 49/59Input voltage range VDC 48V DC (42-57V DC) 230V AC (200-277)Maximum air flow m3/h 2450 2590Power consumption 50/80/100% W 78/239/366 71/284/400Product size (h x w x d) mm 790 x 530 x 530 790 x 530 x 530Weight kg 25 25

CC 3000

17

TO

CO

OL


H I G H - C A PAC I T Y F R E E CO O L I N G

Features

�Total heat management – designed for energy-efficiency with maximum use of controlled ventilation

�Ensure energy-efficient cooling strategy – automatic change between cooling modes

�Protect your equipment – standard M5 fine bag filter and optional AirMaze

�Avoid unscheduled service visits – plan service with built-in filter monitor

�Wide geographical usage – ambient temperature operating range from -40 to 55°C

�Stay in control from your laptop – remote monitoring

T K S 60

Applications


�Telecom shelters



�Drive stations

�DC powered sites

Controller










Specifications Units 230V AC (EC fan) 48V DC (EC fan)

Model A B CNominal air flow m3/h 3700 4200 3200Nominal cooling capacity in W/K (Δt = 1°C) W/K 1230 1400 1050Nominal fan power consumption (at 100% fan speed) W 529 782 374Sound level @ 1m dB(A) 64 67 64Fan nominal voltage V 230V AC 230V AC 48V DC (42-57V DC)Maximum current A 2.2 3.4 7.8Product size (h x w x d) mm 1100 x 600 x 600 1100 x 600 x 600 1100 x 600 x 600Weight kg 51 53 50

18


D I S P L AC E M E N T F R E E CO O L I N G

Features

�Stay in control: total heat management with control of several external units

�Ensure energy-efficient cooling strategy – automatic change between cooling modes

�Protect your equipment – F5 displacement bag filter keeps your rooms clean

�Avoid unscheduled service visits – plan service with built-in filter monitor

�Wide geographical usage – ambient temperature operating range from -40 to 55°C

�Silent and energy-efficient – very low air flow and fan speed

D F C 350 D F C 450

Applications


�Telecom shelters





�DC powered sites

Specifications UnitsDFC 350 48V DC (DC fan)

DFC 350 230V AC(EC fan)

Maximum air flow m3/h 514 514Max. cooling capacity W/K 600 600Cooling capacity up to 1.6m above floor at t=5°C

kW 3 3

Fan max. current A 2.3 0.9Max. power consumption W 40 35Sound level @ 5m dB(A) 36 34Product size (h x w x d) mm 1982 x 385 x 166 1982 x 385 x 166Weight kg 10 10

Controller










Specifications UnitsDFC 450 48V DC (DC fan)

DFC 450 230V AC(EC fan)

Maximum air flow m3/h 1100 1100Max. cooling capacity W/K 1000 1000Cooling capacity up to 1.6m above floor at t=5°C

kW 5 5

Fan max. current A 2.5 1.1Max. power consumption W 40 61Sound level @ 5m dB(A) 41 41Product size (h x w x d) mm 2096 x 486 x 238 2096 x 486 x 238Weight kg 13 13


�AirMaze for DFC 350

19

TO

CO

OL


D C A I R - CO N D I T I O N I N G

Features

�Clean internal environment – closed loop cooling

�Low inrush current – true DC air-conditioner

�No power loss in conversion – no inverter

�Energy-efficient – DC-supplied and capacity-controlled

�Easy installation – mono-block, plug-and-play units

�Lower carbon footprint – environmentally friendly refrigerant R134a

�Easy maintenance – small and compact design

�Expected service life – 10 years

D C 450

Applications



�Hybrid Telecom sites and DC powered sites

�Battery compartments and power supply rooms



�Drive stations

�Billboards, kiosks, ad boards and displays

Specifications Units DC 450

Operational temperature range °C -10 - +55Storage temperature @ 80% RH °C -20 - +70Sound level @ 2m dB(A) 65Refrigerant R134aCooling capacity at 25°C internal and 50°C ambient W 220Cooling capacity at 35°C internal and 35°C ambient W 420Cooling capacity at 55°C internal and 55°C ambient W 520Internal air flow m3/h 180External air flow m3/h 330Power consumption at 25°C internal and 50°C ambient W 200Power consumption at 35°C internal and 35°C ambient W 190Power consumption at 55°C internal and 55°C ambient W 248Input voltage range VDC 45-57Product size (h x w x d) mm 491.5 x 443 x 158Weight kg 20

D C 450 B AC K

20


D C S P L I T A I R - CO N D I T I O N I N G

Features

�Clean internal environment – closed loop cooling

�Low inrush current – true DC air-conditioner

�No power loss in conversion – no inverter

�Minimum hot spots – high air flow ensures constant air recirculation

�Steady performance – compressor/fan RPM independent from supply voltage fluctuations

�Energy-efficient – DC-supplied and capacity-controlled

�Cooling On Demand – maintains capacity-controlled room temperature when activated by master

�Expected service life – 10 years

D C 3500

Applications




�Battery compartments




�Drive stations

Controller

�Ready for remote control – built-in Dantherm CC0 controller ready for remote climate control

�Energy-saving strategy – applies a minimum of energy to maintain temperature set point

�Cooling On Demand – maintains capacity-controlled room temperature when activated by master

�Easy change of settings – user-friendly display (optional)

�Fast configuration – SD card interface and TTL link

�Automation – standard ModBus protocol over RS485 for easy connection to internet and customer interface

Specifications Units DC 3500

Operational temperature range °C -15 - +55Storage temperature @ 80% RH °C -40 - +70Sound level @ 1m dB(A) 57Refrigerant R134aCooling capacity at 35°C internal and 50°C ambient W 3624Cooling capacity at 35°C internal and 35°C ambient W 3822Internal air flow m3/h 860External air flow m3/h 1950Power consumption at 35°C internal and 35°C ambient W 1138Input voltage range VDC 40-57Product size (l x h x d) mm 1170 x 757 x 730Weight kg 24

21

TO

CO

OL


A I R V E N T W E AT H E R P R OT E C T I O N

AirMaze is a compact air path protection capable of removing wind-driven water and sand particles from even high air speed applications.

The AirMaze is designed for rough climate conditions, optimising filter service life and protecting the shelter and cabinet applications from intruding water and sand particles.

Features

�Flexible mounting and flexible air intake

�Outdoor mounting – discrete and elegant solution

�Constructed of sheet metal (Alu-zinc AZ150)

�Low pressure drop – optimising your power consumption

A I R M A Z E C U B E I I

Applications


�Telecom shelters


�Drive stations

�Billboards

�Kiosks


�Ad boards

�Displays

Specifications Units AIRMAZE II

Pressure drop Pa 30Product size (h x w x d) mm 500 x 450 x 450Weight kg 18

22


A I R V E N T W E AT H E R P R OT E C T I O N

AirMaze is a compact air path protection capable of removing wind-driven water and sand particles from even high air speed applications.

The AirMaze is designed for rough climate conditions, optimising filter service life and protecting the shelter and cabinet applications from intruding water and sand particles.

Features

�Compact air path protection for frame mounting

�Designed for protection of indoor Free Cooling units

�Standard material – alu-zinc

�Optional insect protection grid (painted RAL 7035)

�Optional customer-specified colouringA I R M A Z E PA N E L I & I I I

Applications


�Telecom shelters


�Drive stations

�Billboards

�Kiosks


�Ad boards

�Displays

Specifications Units AIRMAZE I AIRMAZE III

Material Alu-zinc Painted RAL 7035Grill No Yes – GR487Pressure drop Pa 30 30Product size (h x w x d) mm 1149 x 735 x 120 1149 x 735 x 120Weight kg 16 22

23

TO

CO

NT

RO

L

E L E C T R O N I C S CO O L I N G CO N T R O L S

R E M OT E C L I M AT E CO N T R O L

Features

�Operational security – configuration parameters stored in on-board, non-volatile memory

�Access via standard browser – WEB GUI for remote monitoring, configuration, data collection, change of operational mode, firmware upgrades, backup and restore

�Ready for remote control – configurable digital input/outputs supporting remote monitoring/control

�Intelligent monitoring – ethernet SNMP

�Easy configuration and logging – built-in SD card reader

�Clear, user-friendly display – on-board 2,4 inch TFT colour display

�Flexible operation – on/off and capacity-regulated control of fans/compressor

�Wide operating supply voltage – 85-265V AC (ext. AC/DC converter)

�Quick change of temp. set point – on display

�Real-time clock/calendar – requires battery

�MODbus TCP/IP

�Many languages available (EN, DK, DE, SE, FR, IT, PL)

Connections

�Connection for analogue pressure sensor (filter monitoring)

�Connection for analogue humidity sensor (operational mode change)

�Connection and capacity control for two free cooling units

�Euro type spring loaded pluggable connectors

�Galvanically insulated alarm output (insulation voltage: 500V)

�TTL Link serial connection for TTL/USB cable for laptop

CC 3000

Specifications Units CC 3000

InputDC supply voltage range V 40-60Digital 1, 2, 3 Pull up to 12V. For use with dry contactRoom/hotspot sensor °C -30 - +85 NTC type NTCLE100E3272GB0Humidity sensor I2CPressure sensor I2COutputAC 1, 2 0/24V DC 200mA or dry contactFB 1, 2 8-way multi cableHeater 24V DC AUX 0/24V DC 200mA or dry contactAlarm 1-10 Dry contactDamper 1, 2 0/24V DC 200mACommunicationOpto-insulated TTL +, -, TX, RX AMP – 281698-6Ethernet RJ 45 w. shieldMemoryOnboard EEprom 1K non volatile Storage of operating parametersMass storage device <32 GB SD Flash For logging and change of parametersOperational temperature range, min./max. °C -45 - +85Display inch 2.4 TFT colour w. back lightProduct size (h x w x d) mm 200 x 215 x 90

Options

�SD card

�Serial TTL/USB adapter.(Standard adapter for use with standard terminal PC software)

�Humidity sensor

�Pressure sensor

24

D E H U M I D I F I E R S

WA L L M O U N T E D

C D F 10Features

�Built into a strong and robust powder coated hot galvanized sheet metal cabinet

�Evaporator and condenser coils are epoxy-coated for high corrosion resistance

�The condensate outlet is located at the bottom of the CDF dehumidifier. The outlet stub can be connected to a water hose.

�Easy accessible washable air filters from front cover

�Reciprocating compressor

�Axial fan

�Electronic control and user-friendly display panel

�Active, demand-controlled defrosting

�Available in white and grey

Applications

� Archives and museums

� Churches

� Changing rooms

� Waterworks

� Garages and car storage


�Room hygrostat

�Water tank, grey or white

Specifications Units CDF 10

Operating temperature rangeOperating humidity rangeDehumidification @ 30°C/60% RHAir flowPower supplyMax. power consumptionSound pressure level @ 1mRefrigerantWater container capacityProduct size (h x w x d)Weight

°C% RHl/24hm3/hV/HzkW

dB(A)

lmmkg

3-3040-100

7.5220

230/1ph/500.346

R134a5.5

600 x 535 x 24028

C D F 10 with water tank

25

TO

DR

Y



D H 15Features

�Compact design for installation in small areas

�Self contained with fully automatic operation

�Integral humidistat

�Tamper proof controls

�Epoxy polyester painted zintec steel cabinet

�Hot gas defrost for low temperature operation

�Air filter

Applications

� Drying rooms

� Public buildings

� Changing rooms

� Store rooms

� Modular buildings

� Stairwells, cellars and basements

� Museums and galleries

� Unheated premises

� Garages

Options

�Through the wall version

Specifications Units DH 15AX

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLAMaximum supply fuseLRA (compressor start)Product size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAA

mmkg

mm ID

0-35150.9225

053

R407c230/1ph/50

0.433.81018

825 x 363 x 3203310

26



A D 110

Features

�Case made of stainless steel

�Air intake left through air filter, air outlet at the front, draft-free, through slanted slats

�Space-saving wall mounting

�Fully hermetic piston compressor

�Energy-efficient axial fan

�Maintenance-friendly refrigerant circuit with service connector

�Condenser and evaporator made of copper tubes with aluminium fins

�On-demand hot gas defrost system

�Hygrostat for variable humidity control

�Operation hour counter

�Socket thermostat

Applications

� Industrial and commercial

� Preservation

� Sewage treatment, waterworks

� Homes and cellars

� Swimming pools


�Pump kit PK-Uni

�Replacement filter

�Condensate discharge hose 12 x 2mm

�Hose clip discharge hose 12 x 2/15 x 2mm

�Wall mounting as standard

Specifications Units AD 110

Capacity (30°C/80% RH) l/24h 12Air flow m3/h 250Operating temperature range °C 3-32Operating humidity range % 35-95Power consumption W 280Power supply V/Hz 230/1ph/50/60Sound level dB(A) 46Condensate drain mm 12 x 2Product size (h x w x d) mm 498 x 330 x 241Weight kg 24

27

TO

DR

Y



D H 30

Features



�Polyester coated evaporator and condenser

�Plastisol coated galvanised steel cabinet


�Quiet centrifugal fans

�Remote humidistat and on/off function

Applications

� Drying rooms

� Modular buildings

� Electrical sub-stations

� Sports clubs and changing rooms

� Warehousing and storage

� Museums, libraries and galleries

� Garages

Options


�Electric air heater

�Floor stand kit

Specifications Units DH 30AX DH 30AXP

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyDehumidifier power inputFLAMaximum supply fuseLRA (compressor start)Heater typeHeat outputFlow rateProduct size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAA

kWl/minmmkg

mm ID

0-35301.9700

052

R407c230/1ph/50

0.754.410

15.8Optional LPHW

3.05.0

782 x 270 x 6484016

0-35301.9700

052

R407c230/1ph/50

0.7512.720

15.8Standard Electric

2.0-

782 x 270 x 6484016

28



D H 60Features






�Quiet centrifugal fans


Options


�Electric air heater

�Floor stand kit

Specifications Units DH 60AX DH 60AXP

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyDehumidifier power inputFLAMaximum supply fuseLRA (compressor start)Heater typeHeat outputFlow rateProduct size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAA

kWl/minmmkg

mm ID

0-35603.5

12800

54R407c

230/1ph/501.27.51330

Optional LPHW5.05.0

1247 x 270 x 6486016

0-35603.5

12800

54R407c

230/1ph/501.2

24.23230

Standard Electric4.0-

1247 x 270 x 6486016

Applications


� Churches

� Changing rooms

� Waterworks


29

TO

DR

Y

C D F 50


WA L L M O U N T E D / F LO O R S TA N D I N G

Features

�Built into a strong and robust powder coated hot galvanized sheet metal cabinet

�Evaporator and condenser coils are epoxy-coated for high corrosion resistance

�Fixed to the wall by means of a wall mounting strip supplied with the unit

�Condensate outlet located at the bottom. Outlet stub can be connected to a ¾" hose

�Outside connection to mains

Controls

�Built in electronic hygrostat and thermostat

�Integrated ON/OFF control of humidity and temperature (electric or water heating coils as accessories)

�0-VOLT connection for alarm

�230 V for control valve, exhaust fan and pump/boiler

�RS 485 gate for BMS (Modbus)

Applications


� Churches

� Changing rooms

� Waterworks



�Wireless remote control DRC1

�Floor mounting kit

�Water heating coils

�Control valve for water heating coils

�Electric heating coils

�Exhaust fans

Diodes

BLUE: Power connected, standby mode GREEN: Compressor ON, deicing YELLOW: Remote pairing mode RED: Errors

Defrosting

Active, demand-controlled defrosting is incorporated in the electronic control.

Service

For easy service the refrigerant circuit is supplied with a service valve. The PCB has a USB gate for history data logging for easy fault finding.

Specifications Units CDF 40 CDF 50 CDF 70

Operating temperature rangeOperating humidity rangeDehumidification @ 30°C/60% RHAir flowPower supplyMax. power consumptionSound pressure level @ 1mRefrigerantFilterProduct size (w x d x h)WeightCondensate drain size (stub)

°C% RHl/24hm3/hV/HzkW

dB(A)

mmkg

inch

3-3240-100

30400

230/1ph/500.7846

R407cG3 PPI 15

1010 x 327.8 x 699.956.5

¾

3-3240-100

53680

230/1ph/501.3747

R407cG3 PPI 15

1060 x 327.8 x 699.965¾

3-3240-100

55900

230/1ph/501.550

R407cG3 PPI 15

1495 x 327.8 x 699.975.5

¾

30

H I G H C A PA C I T Y D E H U M I D I F I E R S


D H 110Features




�Stove enamelled aluminium cabinet


�Quiet centrifugal fans, two speeds


Applications

� Data centres

� Warehousing and storage

� Museums and art galleries

� Offices and archives

� Sports halls and gyms

Options


�LPHW air heater

Specifications Units DH 75AX DH 110AX DH 110BX

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLAMaximum supply fuseLRA (compressor start)Heater typeHeat output @ 80°C flowFlow rateProduct size (w x d x h)WeightCondensate drain size (brass compression)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAA

kWl/minmmkg

mm

5-35864.0

11800

53R407c

230/1ph/501.59.51355

Optional LPHW8.99.6

1520 x 385 x 79614315

5-351085.2

11800

53R407c

230/1ph/502.1122066

Optional LPHW8.99.6

1520 x 385 x 79614415

5-351085.2

11800

53R407c

400/3ph/502.05.51030

Optional LPHW8.99.6

1520 x 385 x 79614415

31

TO

DR

Y



D H 150

Features



� Constant flow fan – automatically adjusts to ducting




Applications

� Warehousing and equipment storage

� Metal and spare parts storage


� Museums and furniture storage

� Car storage facilities

Options

� Top or rear fan outlet

� Return air filter

� Condensate pump

� Compressor soft start

� Top discharge box with heater options

� LPHW heater

� Heat recovery to water

� External condenser unit

� Remote humidistat

� Mobile wheels and handle version

Specifications Units DH 150AX DH 150BX

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLA (electrical)Maximum supply fuseLRA (compressor start)LRA (compressor soft-start)Heater typeHeat outputFLA (heater)Maximum fuse sizeProduct size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAAA

OptionalkWAA

mmkg

inch

0-351507.4

25000-200

58R407c

230/1ph/502.521306128

Top box electric9

3650

660 x 660 x 1313130

¾ BSPM

0-351507.4

25000-200

58R407c

400/3ph/502.511163013

Top box electric9

1216

660 x 660 x1313130

¾ BSPM

32



D H 300

Features





�Reverse cycle defrost for very low temperature operation

Options

� High pressure fan


� Condensate pump


� Top discharge box




Applications






Specifications Units DH 300BY

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLAMaximum supply fuseLRA (compressor start)LRA (compressor soft-start)Product size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAAA

mmkg

inch

-15 - +3530014.75000

6066

R407c400/3ph/50

6.71924

10134

980 x 826 x 1475220

1½ BSPM

33

TO

DR

Y



D H 600

Features





�Reverse cycle defrost for very low temperature operation

Applications






Options

� Top or rear fan outlet

� High pressure fan


� Condensate pump


� Top discharge box




Specifications Units DH 600BY

Operating temperature rangeDehumidification @ 30°C/60% RHHeat recovered to air @ 30°C/60% RHAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumptionFLAMaximum supply fuseLRA (compressor start)LRA (compressor soft-start)Product size (w x d x h)WeightCondensate drain size (flexible plastic hose)

°Cl/24hkW

m3/hPa

dB(A)

V/HzkWAAAA

mmkg

inch

-15 - +3560029.79000

8063

R407c400/3ph/50

102635

13555

1730 x 1250 x 1600497

1½ BSPM

34


D RY I N G C U P B O A R D S

Features

�Low energy costs for drying – heat pump technology with additional heat recovery guarantees lowest energy consumption

�Sturdy cabinet construction in CFRP double-shell execution completely isolated

�Door front 2-piece set with quick release fasteners

�Energy consumption at 70% residual moisture 0.29 kWh/kg dry laundry

�The clothes drying oven can be easily operated, then a reliable electronic system controls and optimizes the drying program making it fully automatic

Applications

� Homes

� Commercial and industrial

� Laundries

� Textiles

� Changing rooms

� Sports clubs

K W T 2.0

Specifications Units KWT 2.0

Drying performance kg 6Air flow m3/h 900Operating temperature °C 5-25Power supply V/Hz 230/1ph/50Max. power consumption kW 1.5Refrigerant R407cSound pressure level db(A) 58Product size (h x w x d) mm 2030 x 1430 x 630Weight kg 300

35

TO

DR

Y

K K T 2.0


D RY I N G C U P B O A R D S

Features

�Low energy costs for drying – heat pump technology with additional heat recovery guarantees lowest energy consumption

�Condensation drying (the water is excreted and not conveyed to the outside in warm exhaust air) guarantees the least amount of time with the gentlest, wrinkle-free low-temperature drying

�Velcro fasteners, light strips, zip fasteners, badges, rubber parts etc. are not damaged at drying temperatures below 50°C

�The 230V electric cable enables easy installation

�The laundry dryer can be easily operated, then a reliable electronic system controls and optimizes the drying program making it fully automatic

�The condensate outlet is on the rear side

�The upper cabinet element can be disassembled separately for servicing

Applications

� Commercial and industrial

� Construction

� Emergency services

� Freezing companies

Options

� Two bars for max. 36 hooks

� Hangers, coat hooks

� Hole tray for ropes, protective masks, small parts, etc.

� Tray with 20 support stands for boots, gloves etc.

Specifications Units KKT 2.0

Air flow m3/h 900Operating temperature °C 5-25Power supply V/Hz 230/1ph/50Max. power consumption kW 1.5Refrigerant R407cSound pressure level db(A) 58Product size (h x w x d) mm 2030 x 1430 x 630Weight kg 300

36


D U C T E D

Features

�Case made of galvanized steel

�Heat pump with heat recovery

�Condensate drain

�Two EC fans with high external pressure

�Four channel inlet ABL/ZUL'AMAN and FOL/AUL

�Three air flaps with servo motors

�Three sensors for the measurement of humidity, temperature and air pressure

�Bag filters

G E M I N I 2.1G E M I N I 2.2G E M I N I 2.3

Applications

� Basements and cellars

� Underground rooms

Specifications Units Gemini 2.1 Gemini 2.2 Gemini 2.3

Operating temperature range °C 5-30 5-30 5-30Operating humidity range % 40-95 40-95 40-95Capacity (20°C/60% RH) l/24h 25 45 97Air flow m3/h 300 450 800Sound level @ 1m dB(A) 26 26 26Max. external pressure Pa 250 250 250Power consumption kW 0.875 1.545 2.75Power supply V/Hz 230/1ph/50 230/1ph/50 230/1ph/50Fuse A 10 13 16Product size (h x w x d) mm 1275 x 1550 x 645 1275 x 1550 x 645 1410 x 1700 x 645Weight kg 400 410 430

37

TO

DR

Y

Features

�The CDP 75-125-165 are built into a cabinet made of hot-galvanized, powder painted and double-skinned panels with 50mm insulation

�Evaporator and condenser coils are protected against corrosion

�The condensate outlet is located on the air inlet side

�The outlet stub can be connected to a water hose

�Air inlet through a filter placed in a removable frame

�Dry air outlet positioned either horizontally or vertically through the top of the unit

�The access for inspection can be moved to the opposite side

�Fresh air inlet possible through fresh air duct

�Can be supplied with an optional water-cooled condenser. Coupling pipes are made of copper

�Rotary/reciprocating compressor

�Radial fan

�CDP 75 and CDP 125 can be wall mounted using a wall mount kit

�CDP 75, CDP 125 and CDP 165 can be placed on the floor using a shock-absorbing floor mount kit (accessory)

�A water heating coil can be mounted in the air outlet duct for further heating of the dry air (accessory)


�Room hygrostat

�Duct hygrostat

�Room thermostat

�Water heating coil

�Shock-absorbing floor mounting kit

�Wall mounting kit

�Defrost sensor

�Failure monitoring kit

C D P 75C D P 125C D P 165

Applications

�Changing rooms

�Hotel pools

�Private pools

�Production areas

�Therapy pools

�Warehouses

�Wellness centres


D U C T E D

Specifications Units CDP 75 CDP 125 CDP 165

Dehumidification @ 28°C/60% RH l/24h 74 124 162Operating temperature rangeOperating humidity range

°C%

20-3840-100

20-3840-100

20-3840-100

Air flow m3/h 1500 2500 3600Power supply V/Hz 230/1ph/50 230/1ph/50 + 400/3ph/50 400/3ph/50Sound level dB(A) 58 60 63Product size (h x w x d) mm 650 x 1155 x 725 850 x 1300 x 900 975 x 1400 x 1010Weight kg 130 160 190Water-cooled condenser Optional Optional Optional

38

Features

� User friendly control system for high-quality demand management. Automatic monitoring and control of temperature and humidity.

� Cooling circuit with optional external condenser

� Highly efficient EC plug fans with low power consumption

� High efficient M5 bag filters with large surface and low pressure drop

� Load bearing frame construction module with hot dip galvanised sandwich panels with 50mm mineral wool insulation and bottom frame with adjustable feet

� Large inspection doors with strong hinges and tongue locks and handles for easy access for service

� Modular unit for easy and quick installation with all sensors and electrical components already connected. Separate control panel fitted with cables and plugs for quick electrical connection between unit and panel.

� BMS communication with either Modbus or BACnet

Applications

�Dry storage

�Industrial process drying


D U C T E D

D A N X A F

Specifications Units 3/6 AF 5/10 AF 5/10s AF 7/14 AF 7/14s AF 12/24 AF 12/24s AF

Dehumidification @ 28°C/60% RHOperating temperature rangeOperating humidityAir flowExternal duct pressureOutdoor airPower supplyMax. power consumptionHeightWidthDepthWeight

l/h°C%

m3/hPa%

V/HzkWmmmmmmkg

1322-3650-8048503000-30

400/3ph/508.6

11153380880575

2022-3650-8073003000-30

400/3ph/5012.3111533801400800

2522-3650-8095003000-30

400/3ph/5016.1111533801400800

3022-3650-8012000

3000-30

400/3ph/5022.11195335019001125

3922-3650-8014000

3000-30

400/3ph/5024.11195335019001200

5222-3650-8019000

3000-30

400/3ph/5031.71485412522001650

6022-3650-8024000

3000-30

400/3ph/5042.81485412522001675

39

TO

DR

Y

H I G H T E M P E R AT U R E P R O C E S S D R Y I N G


Features

�Rapid moisture removal at lowest cost per litre extracted

�Latent energy reclaimed to reduce power consumption

�Drying at lower temperatures reduces risk of heat damage

�Even drying improves product quality

�Low maintenance

Applications

� Ceramics and timber

� Confectionery and food manufacturing

� Brick, block and tile

� Textiles

� Paper and cardboard

Options

�Range of Calorex control panels

�Stainless steel cabinet

�Steam or LPHW heat exchangers for initial heat input

�Castors for portability to aid cleaning and maintenance

�Air inlet filters

D H 334

Specifications Units DH 334BH

Operating temperature rangeDehumidification @ 50°C/60% RHHeat to air via dehumidificationHeat to air via resistance heaters and dehumidificationAir flowExternal static pressureSound pressure level @ 3mRefrigerantPower supplyNominal power consumedMin. supply capacityMax. supply fuse Heater ratingFLANominal power consumedLRARLANominal running currentProduct size (w x d x h)Weight

°Cl/hkWkW

m³/hPa

dB(A)

V/HzkWAA

kWA

kWAAA

mmkg

30-701710

18.55800

069

R134a400/3ph/50

14.129359

124.972129

985 x 700 x 1476170

40

I N D U S T R I A L D R Y I N G

A D S O R P T I O N

Features

� Sturdy housing in stainless steel

� Low weight

� PTC reactivation heater, eliminates the risk for overheating and allows step-less capacity control

� The desiccant rotor, including its transmission element and fan, can be easily lifted out of the housing for external inspection and service

Applications

� Process air systems

� Store rooms

� Pharmaceutical production

� Pumping stations

� Film production

� Electronics manufacturing

� Confectionery and food production


� Cold storage

DT 160


� External humidistat connection

� Floor stand

� Wall bracket

DT 250

Specifications Units DT 160 DT 250 DT 440

Dehumidification @ 20°C/60% RH kg/h 0.6 1.1 1.4Dry air flow (free blowing) m3/h 160 290 440Available pressure Pa 0 0 0Wet air flow m3/h 40 50 100Available pressure Pa 0 0 0Power consumption kW 1.0 1.3 2.1Power supply V/Hz 230/1ph/50 230/1ph/50 230/1ph/50Sound level dB(A) 53 52.9 69Reactivation power kW 0.8 1.2 1.9Electrical (E), steam (S), gas (G) react. option E E EFilter class 3 3 3Product size (l x w x h) mm 324 x 329 x 274 335 x 351 x 357 335 x 351 x 357Weight kg 10.5 14 31

41

TO

DR

Y


A D S O R P T I O N

Features


� Low weight

� PTC reactivation heater, eliminates the risk for overheating and allows step-less capacity control

� The desiccant rotor, including its transmission element and fan, can be easily lifted out of the housing for external inspection and service

Applications


� Store rooms



� Film production




� Cold storage

DT 210


� External humidistat connection

� Air cooled condenser (DT 210/450 only)

� Floor stand

� Wall bracket

DT 400


Dehumidification @ 20°C/60% RH kg/h 0.6 1.5 2.2Dry air flow m3/h 210 400 450Available pressure Pa 0 30 0Wet air flow m3/h 40 120 120Available pressure Pa 0 0 0Power consumption kW 1.1 2.3 3.5Power supply V/Hz 230/1ph/50 230/1ph/50 230/1ph/50Sound level dB(A) 53.3 62.2 63Reactivation power kW 0.8 2.0 3.2Electrical (E), steam (S), gas (G) react. option E E EFilter class 3 3 3Product size (l x w x h) mm 315 x 315 x 457 504 x 428 x 525.5 504 x 428 x 525.5Weight kg 16.5 28 31

42


A D S O R P T I O N

Features


� Controls including, humidity sensor operation, alarm system, and different options for dry air fan operation

� PTC (Positive Temperature Control) reactivation heater, eliminates the risk of overheating and allows step-less capacity control

Applications


� Store rooms



� Film production




� Cold storage

Specifications Units DT 800 DT 1100

Dehumidification @ 20°C/60% RH kg/h 4.4 6.0Dry air flow m3/h 800 1100Available pressure Pa 150 200Wet air flow m3/h 250 370Available pressure Pa 175 200Power consumption kW 7 10Power supply V/Hz 400/3ph/50 400/3ph/50Sound level dB(A) 60 62Reactivation power kW 6.7 9.25Electrical (E), steam (S), gas (G) react. option E EFilter class 3 3Product size (l x w x h) mm 1050 x 600 x 690 1050 x 600 x 690Weight kg 80 80

DT 800DT 1100


� Air cooled condenser

� Direct Digital Controls

43

TO

DR

Y


A D S O R P T I O N

Features

� Insulated housing in stainless steel

� PTC reactivation heater, eliminates the risk of overheating and allows step-less capacity control

� Built-in PLC with touch screen as standard

� Rotation guard, filter alarm, run-time-meter and service alarm as standard

Applications


� Store rooms



� Film production




� Cold storage

DT 1300DT 2300DT 3300



� Moisture control via external moisture sensor

� Step-less control via 0-10V signal

� Communication with building management system via Modbus, Canbus or via Web server


Dehumidification @ 20°C/60% RH kg/h 9.5 13.8 14.7Dry air flow m3/h 1300 2300 3300Available pressure Pa 200 430 450Wet air flow m3/h 400 500 120Available pressure Pa 320 230 180Power consumption kW 13.6 19 20.6Power supply V/Hz 400/3ph/50 400/3ph/50 400/3ph/50Sound level dB(A) 63 71 70.4Reactivation power kW 13.0 17.5 18Electrical (E), steam (S), gas (G) react. option E/S/G E/S/G E/S/GFilter class 4 4 4Product size (l x w x h) mm 1199 x 807 x 1170 1199 x 807 x 1170 1199 x 807 x 1170Weight kg 200 200 205

44


A D S O R P T I O N

Features


� PTC reactivation heater, eliminates the risk of overheating and allows step-less capacity control

� Built-in PLC with touch screen as standard

� Rotation guard, filter alarm, run-time-meter and service alarm as standard

Applications


� Store rooms



� Film production




� Cold storage

DT 3500



� Moisture control via external moisture sensor

� Step-less control via 0-10V signal

� Communication with building management system via Modbus, Canbus or via Web server

Specifications Units DT 3500

Dehumidification @ 20°C/60% RH kg/h 19.2Dry air flow m3/h 3500Available pressure Pa 170Wet air flow m3/h 850Available pressure Pa 260Power consumption kW 28.7Power supply V/Hz 400/3ph/50Sound level dB(A) 71Reactivation power kW 26Electrical (E), steam (S), gas (G) react. option E/S/GFilter class 4Product size (l x w x h) mm 1199 x 807 x 1170Weight kg 210

45

TO

DR

Y

Features


� Controls including, humidity sensor operation, alarm system, and different options for dry air fan operation

� Reactivation heater type according to customer specifications

Applications


� Store rooms



� Film production




� Cold storage

DT 4500DT 5800



� Direct Digital Controls

Specifications Units DT 4500 DT 5800 DT 7000 DT 9000

Dehumidification @ 20°C/60% RH kg/h 24.6 29.3 43.0 50.0Dry air flow m3/h 4500 5800 7000 9000Available pressure Pa 800 250 200 250Wet air flow m3/h 1400 1400 2200 2500Available pressure Pa 300 300 300 250Power consumption kW 40.8 44.8 65.5 80.0Power supply V/Hz 400/3ph/50 400/3ph/50 400/3ph/50 400/3ph/50Sound level dB(A) 72 72 72 72Reactivation power kW 36.0 40.0 60.0 72.0Electrical (E), steam (S), gas (G) react. option E/S/G E/S/G E/S/G E/S/GFilter class 4 4 4 4Product size (l x w x h) mm 2326 x 1340 x 1311 2326 x 1340 x 1311 2326 x 1340 x 1311 2326 x 1340 x 1311Weight kg 520 520 540 550


A D S O R P T I O N

DT 7000DT 9000

46

Features

� Insulated housing with panels and inspection doors

� Possible to transport by forklift

� Internal purge zone reducing energy consumption and increasing the capacity

� Control system

Applications


� Store rooms



� Film production




� Cold storage

DT 6000

Specifications Units DT 6000 DT 8000

Dehumidification @ 20°C/60% RH kg/h 39 53Dry air flow m3/h 6000 8000Available pressure Pa 440 280Wet air flow m3/h 1700 2500Available pressure Pa 325 150Power consumption kW 54.2 79.5Power supply V/Hz 400/3ph/50 400/3ph/50Sound level dB(A) 73 73Reactivation power kW 48.0 72Electrical (E), steam (S), gas (G) react. option E/S/G E/S/GFilter class 4 4Product size (l x w x h) mm 2000 x 1350 x 1780 2000 x 1350 x 1780Weight kg 900 950


A D S O R P T I O N

DT 8000

47

TO

DR

Y

Features

� Insulated housing with panels and inspection doors

� Possible to transport by forklift

� Internal purge zone reducing energy consumption and increasing the capacity

� Control system

Applications


� Store rooms



� Film production




� Cold storage


Dehumidification @ 20°C/60% RH kg/h 86 126 182Dry air flow m3/h 13000 19000 27900Available pressure Pa 590 440 400Wet air flow m3/h 4200 6000 6980Available pressure Pa 200 450 250Power consumption kW 143.5 207.5 309Power supply V/Hz 400/3ph/50 400/3ph/50 400/3ph/50Sound level dB(A) - 72 -Reactivation power kW 132.0 192.0 288.0Electrical (E), steam (S), gas (G) react. option E/S/G E/S/G E/S/GFilter class 4 4 4Product size (l x w x h) mm 2250 x 1600 x 2300 2400 x 1900 x 2500 2900 x 1900 x 2500Weight kg 1350 1700 2400


A D S O R P T I O N

DT 13000

DT 27000

48

Features

� Prevention of ice build-up on chiller coils

� Prevention of ice build-up on walls

� Prevention of ice build-up on stored products

� Prevention of ice build-up on shelves/racking

� Reduced/infrequent defrost cycles

� Clean dry floors

� Elimination of poor visibility due to fogging

� Dry floors in entrances and airlocks

� Reduced energy consumption

Applications

� Cold storage

DT I 3600


F R E E Z E R R O O M S

Specifications Units DTI 1500 DTI 2600 DTI 3600 DTI 4000 DTI 5000

Dry air flow m3/h 1500 2600 3600 4000 5000Wet air flow m3/h 220 300 350 600 1000Total power connection kW 6.1 10.5 11.9 18.8 28.8Total power connection (with heat exchanger)

kW 3.4 7.8 9.2 10.7 N/A

Maximum capacity at -18oC kg/h 1.25 2.12 2.94 3.21 4.08Dimensions inside version mm 1199 x 807 x 1170 1199 x 807 x 1170 1199 x 807 x 1170 1199 x 807 x 1170 1800 x 1160 x 1221Dimensions outside version mm 1339 x 947 x 1245 1262 x 947 x 1245 1262 x 947 x 1245 1262 x 947 x 1245 N/A

absence of frosting and snow coat

clean dry floorclean dry floor

dry air

cold air

moisture load

t=-25oC

air lock

cold room

process wet air

react wet airreact air

49

TO

VE

NT

ILA

TE

Features

� Panels are double skinned type with nominally 50mm thick insulation and galvanised or ‘Plastisol’ exterior finish, in light grey (RAL 7035). Alternative colours are available. Panels shall be mounted on anodised aluminium pentapost framework, (thermal bridge free if required) and moulded corner pieces.

� Applications requiring stainless steel panels are not a problem and can be manufactured in various grades, as required.

� Demountable or flat-pack the units can be supplied suitable for dismantling and rebuilding in situ, if access is restricted. Alternatively, the units are available in ‘flat-pack’ form, on pallets, for building on site. Dantherm direct-employed Service Engineers can offer an assembly service, if required.

� AHUs are type tested to EN1886 standards: Casing Air Leakage Class L1, Casing Strength Class D1, Casing Thermal Insulation Class T3, Thermal Bridging Factor TB3, Filter Assembly Leakage F9.

� All the WD Range shall be fully compliant with ErP 2018, which is a requirement of the current building regulations part L2.

Options

� Weatherproof option outdoor units can be fully weatherproof for outdoor installation c/w sloping or flat roof, ‘Plastiol’ exterior finish, weather cowls.


� There is a vast range of accessories available e.g. gauges, lights, windows, special finishes, inverters etc.

For specifications, contact Dantherm Ltd.

Applications

� Office buildings

� Hotels

� Schools

� Concert halls

� Galleries

� Multiplex cinemas

� Industrial ventilation

� Shopping centres

� Restaurants

� Gyms

CO M M E R C I A L A I R H A N D L I N G U N I T S

W D G E N E R A L

W D G E N E R A L

50

Features

� Cooling coil sections have slide-out stainless steel drain trays, access sections with lights and view-ports, special cleanable smooth internal finishes, raised bases or unit legs etc. Every aspect of the unit is designed with cleanliness and ease of maintenance in mind.

� Panels are double skinned type with 50 thick insulted panels, plastisol external finish in light grey RAL 7035 (other colours available), mounted on anodised aluminium pentapost framework and moulded corner pieces.

� Thermal-bridge free (thermal break) framework is available.

� WD Healthcare units are fully compliant with HTM 03-01.


Applications

� Hospitals

� Healthcare premises

� Operating theatres

� Clinics

� Laboratories

� Veterinary hospitals

� Healthcare manufacturing

� Pharmaceuticals

� Clean rooms


W D H E A LT H C A R E

W D H E A LT H C A R E

51

TO

VE

NT

ILA

TE

Features

� The units are manufactured using similar high quality materials and finishes as the rest of the WD range but incorporates factory fitted, wired and tested controls, within a compact module(s).

� This is a particularly energy efficient packaged unit range and incorporates thermal wheel heat recovery and EC fan technology. Thermal wheel efficiency is typically 78-83% and up to a maximum of 90%, according to EN308 and at relatively low pressure loss. The intelligent control optimises the operating mode for maximum efficiency in the prevailing conditions.

� Unit range air volume 0.22m3/s – 4.16 m3/s.

� The smaller units are manufactured in a single module and the larger unit sizes in three modular sections, plus accessories.

� The intelligent control optimises the operating mode for best efficiency

� All the WD Range shall be fully compliant with ErP 2018, which is a requirement of the current building regulations part L2.

Options

� Weatherproof option outdoor units can be fully weatherproof for outdoor installation c/w sloping or flat roof, ‘Plastiol’ exterior finish, weather cowls.


� A choice of accessories include silencers, heating, cooling and humidifier


Applications

� Office buildings

� Hotels

� Schools

� Multiplex cinemas


W D PAC K AG E D H E AT R E CO V E R Y

W D PAC K AG E D H E AT R E CO V E RY

W H Y C H O O S E O U R P R O D U C T S

Hot water heat pumps provide a sustainable heating solution which, compared to fossil fuel or direct electric systems, will dramatically cut operating costs and carbon emission.

SUSTAINABLE HEATING SOLUTIONS

Our wall mounted and floor standing dehumidifiers prevent mould and bacteria development and keep stored goods and artefacts dry.

Our development teams focus on reducing the carbon foot print by making our products as environmentally friendly as possible.

PROTECTING THE ENVIRONMENT

Our products are easy to install, use and maintain.

USER AND MAINTENANCE FRIENDLY

Our heaters, dehumidifiers and coolers keep temperature and humidity at a comfortable level.

WORK IN HEALTHY CONDITIONS

Our wide range of units and operating temperatures ensure there is a system to fit every commercial or industrial need.

CHOOSING THE BEST SOLUTION

We focus on developing energy saving units

REDUCE OPERATING COSTS

CREATING HEALTHY ENVIRONMENTS

Refrigerant or desiccant drying solutions for manufacturing, process drying and cold storage.

LARGE SCALE INDUSTRIAL DRYING

danthermgroup.co.uk

Dantherm Ltd.Unit 12, Galliford RoadMaldon CM9 4XDUnited Kingdom +44 (0)1621 [email protected]

Commercial/Industrial Catalogue 2019 – 2nd edition UK

product range commercial/industrial...6 pro-pac 140h water heating hot water heat pumps features hot...

Documents