product references wi scan® b&d wibodi01 wiscan01 … · emulating indicator for steam...

Eurotest® Ref. 303 - 50 units/box - 4 boxes/carton (200 units).

Quickise® Ref. 300 - 30 units/box - Carton of 4 boxes (120 units).

Steripoint®134° C 3.5 min

250 pieces:Ref. 28635


134° C 5.3 min250 pieces:Ref. 28653


134° C 7 min250 pieces:Ref. 28607


134° C 18 min250 pieces:Ref. 28618


Aquavap®

Ref. 402 - AquaVap® Mini100 units/box.

Ref. 412 - AquaVap® Standard50 units/box.

Ref. 422 - AquaVap® Tray50 units/box.

SEALabel® Ref. 605MI - MonoSEAL® with ink indicator - 1000 units/box.

Ref. 605M - MonoSEAL® without ink indicator - 1000 units/box.

Ref. 605L - SEALabel® + MonoSEAL® with ink indicator - 500 + 500 units/box.

Add the colour code at theend of each reference:

Hanglabel® Colour code:

1000 units/box.

Product references

Sterlab - Sophia Antipolis - 2720 Chemin Saint-Bernard - 06224 Vallauris Cedex FranceTel: +33 (0)4 97 24 58 58 - Fax: +33 (0)4 97 24 58 59 - [email protected]

www.sterlab.com

WI SCAN® probe Ref. WIP13435 - Probe for 134°C 3.5 min cycle (other cycles available).

Ref. WISCAN01 WI SCAN® reader.

Ref. WISOFT01 WI SCAN® software.

Ref. WICHAR01Charger for reader.

WI SCAN® B&D Ref. WIBODI01 - Bowie & Dick test.

Ref. WISCAN01 WI SCAN® reader.

Ref. WISOFT01 WI SCAN® software.

Ref. WICHAR01Charger for reader.

Ref. HLB Ref. HLR Ref. HLG Ref. HLY Ref. HLS Ref. HLO Ref. HLW

TwiggySeal®Colour code:

1000 units/box.

Adhesive label Date Operator Cycle Autoclave

Sterlab STEAM

Turns to green

Expiry date :

Ref. AD-L: adhesive labels with no indicator.Ref. AD-LS: adhesive labels with steam indicator.Ref. AD-LD: adhesive labels with dry heat indicator.Ref. AD-LP: adhesive labels with plasma indicator.

Ref. TW415B Ref. TW415R Ref. TW415J

15 rolls/box 500 labels/roll.

PLC

IS U

K 09

-201

5

Sterlab complies with the requierements of the international standards ISO 9001: 2008 - NF EN ISO 13485: 2012.

Routine loaded probeWI SCAN® probe is the first routine loaded probe in a steri-lisation package (container or wrapped tray) which is able to transfer through the packaging the data acquired during the sterilisation cycle.WI SCAN® probe enables the verification and validation of the plateau duration at a certain temperature without opening the sterile packaging.

Electronic Bowie & Dick TestA new air and NCG (non-condensable gases) detection concept that analyses autoclave steam and gives a never yet obtained reliability in Bowie & Dick tests for all pre-vacuum autoclaves.WI SCAN®electronic Bowie & Dick Test simplifies controls, suppresses the use of paper packs, optimises costs with the reader/software architecture (electronic data archi-ving) for reading and saving cycle results.WI SCAN® electronic Bowie & Dick Test is calibrated for 400 cycles.

Simplicity of use and result interprétation.

• An optimised and compact Bowie & Dick test pack to deal with budget constraints in the health care system.

• EuroTest® has been designed as a budget-friendly variation of Quickise®with the same sensibility of the reactive ink.

• Highest rate quality standard ISO 11140-4/ Class 2 Norm.

Emulating indicator for steam sterilisation cycles (121° C to 134° C).Steripoint® is manufactured with a high standard quality ink which has been developed by Sterlab.Steripoint® is made of small strips printed with purple reactive ink which turns green integrating the 3 steam sterilisation parameters: time, steam, temperature.• High accuracy of the chemical ink formula for a precise

colour change when correlating 3 critical parameters (steam, time, temperature).

• Constant reproducibility.• Strict quality control throughout the numerous tests

prior to the product release.• Complies with the EN ISO 11140-1 / Class 6 Norm.

AquaVap® is dedicated to absorb the excessive quantity of residual water due to condensation inside containers or instrument trays.Water goes through the base of AquaVap® then reaches the top of AquaVap® by capillarity where re-vaporisation of excessive water occurs. Excessive condensation, even in the worst conditions, will be absorbed by placing vertically an AquaVap® evaporator on each side of the tray or the container.

The label holder folds and clips on the seal and is placed on the front side of any kind of container.The oval window allows you to check if the SEALabel® is correctly locked.The traceability label is stuck on the SEALabel® holder and can be detached for archiving.

Suitable for washing machines and autoclaves.Very easy to place around container or instrument plateau handles.Made of polypropylene, HANGLABEL® is nearly impossible to be torn off during transport (high resistance).

A label perfectly adaped for use in the CSSD.

A universal seal with a label holder forsterilisation containers.

The end ofexcessivecondensation.

That’s the point...!

Where qualitymeets economy.

Solution for wet loads

Electronic controllers Bowie & Dick test packs Emulating indicators Traceability items

134° C 3.5 min

121°C to 134°C

AquaVap®

SEALabel®& MonoSEAL®

Si /

I f appl icab

le

HANGLABEL®

S

i /I f

appl icable

S

i /I f

appl icable

S

i /I f

appl icable

S

i /I f

appl icable

• Flawless reading in case of air leakage.• All traceability data can be found in front of the reactive

sheet.• Excellent and constant sensitivity from one batch to

another.• Continuous conformity controls made in a dedicated

autoclave during the manufacturing process. • No reversibility of the reactive ink in the long term.• Result interpretation guide printed on the back of the

test pack.• Complies with the EN ISO 11140-4 / Class 2 Norm.

QuickEasySecure ...!

Quickise®

Immediate identification and extraction of the reactivesheet from the test pack.

Twiggyseal® is specially adapted for secure closure of security boxes or trolleys in hospitals (A&E, CSSD, Pharma-cy...). It allows the delivery of boxes or trolleys filled with medical devices or drugs in secure conditions to different hospital units without any risk of accidental opening and re-closure.Adjustable in length, it can be used with a lot of different closing systems as a security seal.

Twiggyseal®

Universal security seal

Adhesive labelsfor the sterilisation processes monitoring.

Available with different chemical indica-tors to provide the sterilisation traceabi-lity and validation of processes, such as steam sterilisation , ETO, Dry Heat, etc. The labels are to be used with the label guns.

Date Operator Cycle Autoclave

Sterlab STEAM

Turns to green

Expiry date :

product references wi scan® b&d wibodi01 wiscan01 … · emulating indicator for steam...

Documents