product specifications warning -...
TRANSCRIPT
G7 SINGLE-STATION STRENGTHCHEST PRESS
MATRIX FITNESS SYSTEMS | 1600 LANDMARK DRIVE COTTAGE GROVE WI 53527 USA
To l l Free 866.693.4863 matr ix f i tness .com Fax 608.839.8687
PART # 0000088210
REV. 1.5
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment.
It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
PROPER USAGE
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX Fitness Systems equipment be used properly to avoid injury.
Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY!
1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using this equipment.
2. All warnings and instructions should be read and proper instruction obtained prior to use.
3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts.
5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.
6. Check to see that the selector pin is completely inserted into the weight stack.
7. NEVER use the machine with the weight stack pinned in an elevated position.
8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer.
9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
CHEST PRESS PLACARD
ACTIONFREQUENCY
Clean UpholsteryDaily
Inspect CablesDaily
Clean Guide RodsMonthly
Inspect HardwareMonthly
Inspect FrameBi-Annually
Clean MachineAs Needed
Clean GripsAs Needed
Lubricate Guide RodsAs Needed
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods.
MAINTENANCE CHECKLIST
PRODUCT SPECIFICATIONS
TECH SPECS
Overall dimensions63”L X 57”W x 52”H
Weight827 lbs
Shipping weight870 lbs
WARRANTY (Valid in USA only)
Frame (not coatings)10 years
Structural parts10 years
Weight stacks5 years
Pulleys5 years
Pivot bearings5 years
Any items not specified3 years
Labor (excluding upholstery/cables/grips)3 years
Upholstery/cables/grips/springs1 year
chest_press_090914.indd 1 9/14/09 4:11 PM
G7-S13 CHEST PRESS
UNPACKING G7-S13 CHEST PRESSThank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and E9576-2 complaint Class S product. Your MATRIX G7-S13 CHEST PRESS is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
CAUTIONThe weight of the G7-S13 CHEST PRESS is 825 lbs. (375 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing from its pallet during assembly. The weight stack for this machine is 429 lbs. (195 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box. Please be sure to install the equipment on a stable base, properly level the machine and leave at least two feet of clearance to enter and exit the machine. Maximum user weight for this machine is300 lbs.
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
3MM L-Shaped Allen Wrench4MM L-Shaped Allen Wrench5MM L-Shaped Allen Wrench6MM L-Shaped Allen Wrench8MM L-Shaped Allen Wrench10MM L-Shaped Allen WrenchPhillips Screwdriver8MM Open-End Wrench17MM Open-End Wrench
If any items are missing please contact your country’s local MATRIX dealer for assistance.
0mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160
Frame Detail
Step 1
60
Nylon Nut (M10X1.5P)
Q11 Q11
Q11 Q11
Screw (M10X25L)Washer;Arc
Z04Z21
Screw (M10X75L)Z03Screw (M8X60L)Q11Lock Waher(M10)Flat Waher(M10)
C36B30B27
QtyDescriptionItem
12
8
44
4
124
Z21
C36 B30
Z21 Z04C36Z03
B30
B27B30
B27B30B30
C36Z03
Z04
Z04
Z04
C36Z04 B30Z04
Z21 Z04
Z21
Lift the aluminumn wing and top cover,then take apart the front and rear sheilds.Q11 bolts won't be used anymore for the wing and cover re-assembly.
Step 2
Item Description Qty
F16Cable
Cable
Nut;Nylon (M10x1.5P)2
2
1F06
F07
1Z15Z05 Screw(M10X105L)
H40 1
1C17
1F16
F13
Stopper Plate
Screw (φ10xM6x45L)
Fixing Block
Small Pulley Cover
C24 Big Pulley Cover 1
Fixing Pin
Inner C type Clip
2
2
2
1Z22
Flat Washer(M10)
Flat Washer(M8)
B30 Flat Washer(M10)
B27
B30 B27
B30
B27
Z05
C17
Z05C24
Cable
H40
F07
F16 F06
F07
F13
Z15
Z22
Step 3
Item QtyDescription
8
C31 8Screw (M8X25L)
C17
J18
J20
Pulley Cover
CON Rod
Swirl Spring
4
2
C31
C31
AJ1C31
C17
C17
J18
J18 J20
J20 J18
J18 C17
C31C17
Step 4
H28
AH3
Z17H30
H30Z17
Z17H30
Item QtyDescription
2
22
22
2
D11 Fixing AxleH28H30 Steel
Cable
Clamp
Z09Z10Z13
Screw (M6X60L)Flat Washer(M6)
Cap Nut
Screw (M6X12L)Z06
Z17 Settle Screw
Z02 Screw (M0X15L)
13
6
3
C20 Bearing Cover;Base
D13
D49
D50
Circlip;External C Type
Circlip;Internal C Type
Wave Washer
2
2
2
Z10
Z06
Z10
D11Z09
Z13 Z10Z06
D11
Z10Z09
Z10 Z13
Z02
Z10
C20 D49D13
D50
D50D13 D49 C20 Z02
Step 5
Item Description Qty
Screw (M8X60L) 4Z20
Rubber Pad Fixing Plate
Z20 Z20
Z20Z20
Step 6
Item DescriptionZ18 Screw(M10X75L)Z19 Screw(M10X15L)
Qty
44
Head Pad
Z18
Z18
Z19
Z18
Z18
Back Pad
Seat Pad
chest_press_090914.indd 2 9/14/09 4:11 PM