product specifications - wolf home products addition to being certified with the kitchen cabinet...
TRANSCRIPT
Product Specifications
March 2012
WOLF CLASSIC CABINETS
FINISH PROCESS
Page 1 800-234-WOLF (9653) Subject to change without notice - 3/1/12
Exceptional Style, Exceptional Value
WOLF Classic Cabinets proudly offers eight of today’s most popular door style/finish combinations at extremely attractive
price points, including no up charges for the upscale look of paints and glazes. With a broad selection of SKUs,
accessories and moldings, WOLF Classic Cabinets will make your design as beautiful as it is affordable.
Quality is in the Details
WOLF Classic Cabinets are proudly made in the USA, factory-assembled from hand selected American Maple without
cams, brackets or clips. All drawer boxes are dovetailed for strength at no additional charge. In addition, our finishes are
machine-applied using the latest technology to ensure a smooth, even look. Corrugated packaging is securely strapped,
fully encasing your product and assuring safe arrival without damage.
Speed and Reliability
Because WOLF Classic Cabinets are manufactured domestically, there’s no need to worry about disrupted supply,
delayed containers or other issues common among similarly priced products. You won’t need to carry a large inventory
or buy extra product as a failsafe. With every SKU in stock at our Pennsylvania Distribution Center, your order is
available to ship on your next scheduled delivery.
Certified Stewards of the Environment
In addition to being certified with the Kitchen Cabinet Manufacturers Association (KCMA), WOLF products also meet
the goals of the KCMA’s Environmental Stewardship Program (ESP). Participants in the program are held to strict
requirements in support of responsible forest management that promotes sustainability and long-term economic and
environmental benefit. This responsibility includes recycling our saw dust, using low VOC finishes and CARB
approved plywood.
Whether you’re looking for style, quality, affordability – or all three – look no further than WOLF Classic Cabinets.
1. All surfaces are machine sanded
2. Dust particles are removed before entering each
spray machine
3. Product enters an automated finish system where
solvent-based pigment stain is applied
4. Product is sealed and put through a pre-cure
drying process
5. Complete cure is done with slow bake process
6. All edges of parts are hand sanded before put
in a brush sanding machine
7. Final topcoat is applied and put through a pre-cure
process followed by slow bake for final, thorough curing
8. Clear finishes are catalyzed varnish & Paint finishes are
a pre-catalyzed varnish
9. Products are inspected for defects, cleanliness
and smoothness
10. The front side of the products gets a stain coat,
a sealer coat and final top coat. The backs of drawer
front and doors get a stain coat and a sealer coat.
Naturally occurring wood characteristics such as variations in color, grain, mineral streaks and knots are not considered defects. Color variations are a natural occurrence due to species, age, character of cabinets, and exposure to UV light and sunlight. Such variations and changes are not considered defects. For these reasons, new and/or replacement cabinets may not match display samples and/or existing cabinets. Warping is the bending or twisting of a part. To measure a door or shelf, lay the product on a flat surface and measure the gap from the surface to the part. The standard allowable tolerance for wood is 1/8” per lineal foot. Materials that fall within specification are considered acceptable, as a part of the natural characteristics of wood.
WOOD CHARACTERISTICS & VARIATIONS
CABINET SPECIFICATIONS
Half-depth adjustable shelf of 3/4” plywood with bull nosed, foil covered front edges. The shelves are held in place with a self-locking clips on the sides.
Cabinet fronts are made from 3/4” solid maple wood. Front stiles are pocket drilled and assembled with 1-1/4” screws for rugged durability.
Side panels – 1/2” plywood with matching exterior laminate – glued and stapled in a 1/2” dado in the cabinet’s front frame.
Back panels – made from vinyl covered (inside only) 1/2” plywood – are glued and nailed in a 1/2” dado and stapled to the hang rail and cabinet bottom.
All wood 3/4” corner blocks are installed on all corners.
BASE CABINETS
Cabinet fronts are made from 3/4” solid wood. Front stiles are pocket drilled and assembled with 1-1/4” screws for rugged durability.
Side panels – 1/2” plywood with matching exterior laminate – glued and stapled in a 1/2” dado in the cabinet’s front frame.
Back panels – made from vinyl covered (inside only) 1/2” plywood – are glued and nailed in a 1/2” dado and stapled to the cabinet tops and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet.
Adjustable 3/4” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with a self-locking clips on the sides.
WALL CABINETS
FINISH, DRAWERS & HINGES
All drawers are constructed using 5/8” clear finished solid wood with dovetail construction. Drawer bottom is 1/4” plywood in a dado into drawer sides.
Saginaw: Side mount, standard glides
Dartmouth & Hudson: Full extension, under mount glides
Saginaw: Hidden, six-way adjustable hinge
Dartmouth & Hudson: Hidden, six-way adjustable hinge with installed snap on soft-closing mechanism All cabinets come right hand hinged unless specified otherwise.
Adjustable 3/4” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with a self-locking clips on the sides.
All cabinet front and door surfaces receive stain and a catalyzed clear finish. Our finish provides a deep, rich wood tone that is resistant to household chemicals, water, food stains and mild acids.
Page 2 800-234-WOLF (9653) Subject to change without notice - 3/1/12
DOOR STYLES
Page 3 800-234-WOLF (9653) Subject to change without notice - 3/1/12
SAGINAW
Raised Panel Standard Overlay
All Maple Wood Dovetailed Drawer
Side-mount Glides Veneer Center Panel
Available in
Crimson & Honey
DARTMOUTH
Shaker Full Overlay
All Maple Wood Dovetailed Drawer
Soft-close Door/Drawer Full Extension, Undermount Glides
Recess Center Panel
Available in Crimson, Honey
and Painted White
HUDSON
Pillow with Miter Full Overlay
All Maple Wood Dovetailed Drawer
Soft-close Door/Drawer Full Extension, Undermount Glides
Solid Wood Center Panel
Available in Crimson w/Chocolate Glaze,
Heritage Brown w/ Chocolate Glaze Antique White Paint
WALL CABINETS
Page 4 800-234-WOLF (9653) Subject to change without notice - 3/1/12
18” WALL CABINET Cubes
W2418 * 5
W3018 4
W3318 5
W3618 5
12” deep; double doors; no shelf; butt doors * These sizes come as single door.
12
18
24” WALL CABINET Cubes
W2124 * 4
W2424 * 4
W2724 5
W3024 5
12” deep; double doors; one shelf; butt doors * These sizes come as single door.
24
12
12” WALL CABINET
12
12
Cubes
W3012 3
W3312 3
W3612 3
12” deep; double doors; no shelf; butt doors
15” WALL CABINET
15
12
Cubes
W2115 * 3
W2415 * 3
W3015 4
W3315 4
W3615 4
12” deep; double doors; no shelf; butt doors * These sizes come as single door.
Cubes
W2730 6
W3030 7
W3330 7
W3630 8
W4230 ** 9
12” deep; double doors; two adjustable shelves; all have butt doors EXCEPT 4230.
30
12
Cubes
W0936 3
W1236 3
W1536 4
W1836 5
W2136 6
W2436 6
36” SINGLE DOOR WALL CABINET
12” deep; single door; three adjustable shelves
36
12
30” DOUBLE DOOR WALL CABINET
30
12
Cubes
W0930 2
W1230 3
W1530 4
W1830 4
W2130 5
W2430 5
30” SINGLE DOOR WALL CABINET
12” deep; single door; two adjustable shelves W0930 Hudson only -- center panel is recessed due to size limitations
24” DEEP REFRIGERATOR WALL CABINET
Cubes
RW3312 6
RW3612 6
RW3318 9
RW3618 9
RW3324 11
RW3624 12
RW3924 ** 13
24” deep; double doors; all have butt doors EXCEPT 3924. **3924 has stationary exposed stile between doors.
24
12
WALL CABINETS
Cubes
W2736 7
W3036 8
W3336 9
W3636 9
W4236 ** 11
12” deep; double doors; three adjustable shelves; all have butt doors EXCEPT 4236. **4236 has stationary exposed stile between doors
36
12
Cubes
W0942 3
W1242 4
W1542 5
W1842 6
W2142 7
W2442 7
36” DOUBLE DOOR WALL CABINET
Page 5 800-234-WOLF (9653) Subject to change without notice - 3/1/12
12” deep; single door; three adjustable shelves
Cubes
W2742 8
W3042 9
W3342 10
W3642 11
W4242 ** 13
12” deep; double doors; three adjustable shelves; all have butt doors EXCEPT 4242. **4242 has stationary exposed stile between doors.
42” SINGLE DOOR WALL CABINET
42” DOUBLE DOOR WALL CABINET
Cubes
WDC2430 10
WDC2436 12
WDC2442 14
WMDC2430 10
WMDC2436 12
WMDC2442 14
12” deep; single door; two adjustable shelves. 36” and 42” cabinets come with three shelves. Dartmouth & Hudson styles: soft close mechanism is a screw-on piece attached to the frame. WMDC: Interior finished to match -- GLASS IS NOT INCLUDED -- see below for glass size needed. *For exact fit, measure opening before ordering glass.
DIAGONAL WALL CABINET STANDARD & DOOR PREPPED FOR GLASS
24
24 24
12
WALL CABINET DOOR PREPPED FOR GLASS
42
12
42
12
Saginaw - Standard Overlay
WMDC2430 -- 10.375 x 24.375 WMDC2436 -- 10.375 x 30.375 WMDC2442 -- 10.375 x 36.375
Dartmouth & Hudson - Full Overlay
WMDC2430 -- 9.0625 x 25.125 WMDC2436 -- 9.0625 x 31.125 WMDC2442 -- 9.0625 x 37.12
Saginaw & Hudson Includes center mullions
Dartmouth Due to style limitations, does NOT include center mullions
Cubes
WMD1530 4
WMD1830 4
WMD1536 4
WMD1836 5
WMD1542 5
WMD1842 6
30 36 42
12
Interior finished to match; 90° flat-front shelves edge banded to match interior
GLASS IS NOT INCLUDED -- see below for glass size needed. *For exact fit, be sure to measure opening before ordering glass.
Saginaw & Hudson Includes center mullions Dartmouth Due to style limitations, does NOT include center mullions
Saginaw - Standard Overlay
WMD1530 -- 9.375 x 24.375 WMD1830 -- 12.375 x 24.375 WMD1536 -- 9.375 x 30.375
WMD1836 -- 12.375 x 30.375 WMD1542 -- 9.375 x 36.375 WMD1842 -- 12.375 x 36.375
Dartmouth & Hudson - Full Overlay
WMD1530 -- 9.625 x 25.125 WMD1830 -- 12.625 x 25.125 WMD1536 -- 9.625 x 31.125
WMD1836 -- 12.625 x 31.125 WMD1542 -- 9.625 x 37.125 WMD1842 -- 12.625 x 37.125
A. Upper door opening: 8” high B. Microwave opening: 17”high x 28 7/8” wide C. Microwave shelf: 14” deep (shipped loose) D. Microwave interior is finished to match exterior
Cubes
WEC1230 3
WEC1236 3
WEC1242 4
MWC3030 7
SPECIALTY WALL CABINET
Wall End Cabinet - WEC
Microwave Cabinet - MWC
30
12
A
B C
D
30 36 42
12
11.5 11.5
WALL CABINETS
30” - 36” - 42” WALL CORNER CABINET
12” deep; single door; two shelves; blind cabinets can be pulled 3” 36” and 42” cabinets come with three shelves. 42” cabinets have double doors.
Cubes
WC2430 5
WC3030 7
WC3630 8
WC4230 9
WC3036 9
WC3636 9
WC4236 12
WC3042 9
WC3642 11
WC4242 12
12
30 36 42
Wall Corner - WC
Blind opening = 6” on ALL sizes
KEY
A: Minimum pull for Square Corner cabinets. (formula: depth of cabinets on opposing wall (blind door opening + outside cabinet stile + 3/4” for functionality) B: Maximum pull for Square Corner cabinets. (formula: depth of cabinets on opposing wall (blind door opening (- minus) outside cabinet pull) C: Minimum filler size required between cabinets. Minimum pull figured when Square Corner Base/Wall or adjacent cabinet doors can open 90 degrees.
BLIND CABINET
WA
LL ADJACENT
CABINET
B
A
C
(two doors)
(two doors)
(two doors)
SAGINAW
Actual
Cabinet Width
Door Width
Blind Door Opening
Center
Stile Width
Outside Cabinet
Stile
Depth of cabinets on the
opposing wall
A. Minimum
Pull (cabinet face frame from wall)
B. Maximum
Pull (cabinet
face frame from wall)
C. Minimum
Filler Required
C. Minimum Filler with
1-1/2” hardware*
WC2430 23" 9” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"
WC3030, 3036, 3042 29" 15” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"
WC3630, 3636, 3642 35" 21” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"
WC4230, 4236, 4242 41" 12.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"
DARTMOUTH & HUDSON
Actual
Cabinet Width
Door Width
Blind Door Opening
Center
Stile Width
Outside Cabinet
Stile
Depth of cabinets on the
opposing wall
A. Minimum
Pull (cabinet
face frame from wall)
B. Maximum
Pull (cabinet
face frame from wall)
C. Minimum
Filler Required
C. Minimum Filler with
1-1/2” hardware*
WC2430 23" 10.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"
WC3030, 3036, 3042 29" 16.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"
WC3630, 3636, 3642 35" 22.5” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"
WC4230, 4236, 4242 41" 14” 6” 6” 1.5” 12” 0 4.5" 1/2" 2"
* dimension may change when using larger hardware
Page 6 800-234-WOLF (9653) Subject to change without notice - 3/1/12
BASE CABINETS
BASE CORNER CABINETS Cubes
LS36 26
BER33 18
BER36 26
BC36 18
BC42 21
BC48 23
24” deep; single door BER: 2 adjustable shelves BC: 1 adjustable shelf; can be pulled 3” BER33 & BER36 Hudson only -- center panel is recessed due to size limitations
26 26 29 29
BER33 BER36
18 18
18 18
Easy Reach - BER Lazy Susan - LS
34½
34
24
Base Corner - BC36 Stile: 6’ Blind opening = 9”
34½
24
Base Corner - BC42 Stile: 6’ Blind opening = 13 1/2”
34½
24
Base Corner - BC48 Stile: 6’ Blind opening = 19 1/2”
34½
18
KEY
A: Minimum pull for Square Corner cabinets. (formula: depth of cabinets on opposing wall (blind door opening + outside cabinet stile + 3/4” for functionality) B: Maximum pull for Square Corner cabinets. (formula: depth of cabinets on opposing wall (blind door opening (- minus) outside cabinet pull) C: Minimum filler size required between cabinets. Minimum pull figured when Square Corner Base/Wall or adjacent cabinet doors can open 90 degrees.
* dimension may change when using larger hardware
BLIND CABINET
WA
LL ADJACENT
CABINET
B
A
C
Dartmouth & Hudson: BC doors are standard overlay
SAGINAW
Actual
Cabinet Width
Door Width
Blind Door
Opening
Center
Stile Width
Outside Cabinet
Stile
Depth of cabinets on the
opposing wall
A. Minimum
Pull (cabinet
face frame from wall)
B. Maximum
Pull (cabinet face frame from wall)
C. Minimum
Filler Required
C. Minimum Filler with
1-1/2” hardware*
BC36 27" 10” 9” 6” 1.5” 24” 12.75 13.5" 1/2" 2"
BC42 36" 14.5” 13.5” 6” 1.5” 24” 8.25” 9" 1/2" 2"
BC48 48" 20.5” 19.5” 6” 1.5” 24” 2.25 3" 1/2" 2"
DARTMOUTH & HUDSON
Actual
Cabinet Width
Door Width
Blind Door Opening
Center
Stile Width
Outside Cabinet
Stile
Depth of cabinets on the
opposing wall
A. Minimum
Pull (cabinet
face frame from wall)
B. Maximum
Pull (cabinet
face frame from wall)
C. Minimum
Filler Required
C. Minimum Filler with
1-1/2” hardware*
BC36 27" 10” 9” 6” 1.5” 24” 12.75 13.5" 1" 2.5"
BC42 36" 14.5” 13.5” 6” 1.5” 24” 8.25” 9" 1" 2.5"
BC48 48" 20.5” 19.5” 6” 1.5” 24” 2.25 3" 1" 2.5"
Page 7 800-234-WOLF (9653) Subject to change without notice - 3/1/12
BASE CABINETS
24” deep; three drawers. NOTE: Hudson comes with recessed panel top drawer and raised panel bottom drawers.
34½
24
SINGLE DOOR BASE CABINET
24” deep; single door, one drawer EXCEPT B09. * B09 has full height door and no drawer. B09 Hudson only -- center panel is recessed due to size limitations
Cubes
B09 * 5
B12 6
B15 8
B18 9
B21 11
B24 12
DOUBLE DOOR
24” deep; double doors, one drawer; butt doors EXCEPT B42. **B42 has two drawers and a stationary exposed stile between doors.
Cubes
B27 13
B30 15
B33 16
B36 18
B42 ** 21
34½
24
Cubes
DB12 6
DB15 8
DB18 9
DB21 11
DB24 12
DB30 15
DB36 18
DRAWER BASE CABINET
34½
24
SINK BASE CABINET
24” deep; double doors, no drawers; * SB24 has single door; rest have butt doors EXCEPT SB42. **SB42 has stationary exposed stile between doors and two false fronts.
Cubes
SB24 * 12
SB27 13
SB30 15
SB33 16
SB36 18
SB39 19
SB42 ** 21
34½
24
CORNER SINK BASE CABINET
24” deep; single door. SCB: full cabinet SCBFF: face frame and floor only
Cubes
SCB36 26
SCB33FF 1
SCB36FF 1 34
24
SPECIALTY BASE Cubes
BEC12 L 6
BEC12 R 6
BWB18 9
Base end choose right or left hand; BWB includes 2 white 35 quart trash cans BEC drawer head is stationary
Base End
Cabinet
34½
12
34½
24
Waste Basket
Cabinet
Page 8 800-234-WOLF (9653) Subject to change without notice - 3/1/12
TALL CABINETS VANITY CABINETS
Page 9 800-234-WOLF (9653) Subject to change without notice - 3/1/12
UTILITY CABINET
84 90 96
24
Cubes
U1884 21
U1890 23
U1896 24
U2484 28
U2490 30
U2496 32
24” deep; includes one shelf between doors. Unfinished toekick is installed on all units.
Cubes
SHELFKIT1824 1
SHELFKIT2424 1
Shelf kits include four shelves and clips. WOLFCS: style 001
Cubes
OC3384 39
OC3390 42
OC3396 44
OVEN CABINET
Oven Opening - 24” high x 27” wide; Drawers may be removed and cut out to create a Double Oven opening. Oven cabinet has a 3” left and right stile running the entire height of the cabinet. As a result, Dartmouth and Hudson doors and drawers are not full overlay. See cabinet specs on e-Toolbox for further detail. Cabinet Openings: OC3384: 18-3/4 x 27 OC3390: 24-3/4 x 27 OC3396: 30-3/4 x 27 NO Shelves in upper cabinet
84 90 96
24
PULL OUT SHELF FOR BASE & TALL
Cubes
POS12 1
POS15 1
POS18 1
POS21 1
POS24 1
POS27 1
POS30 1
POS33 1
POS36 1
Single drawer; solid wood dovetail construction -- FIELD INSTALLED WOLFCS: style 000
Overall height -- 2¼” Inside height -- 1½”
Pull out shelf includes dove tailed drawer box with side mounted epoxy glides, front spacer, and screws for installation
Cubes
VSB24 * 11
VSB27 12
VSB30 13
VSB33 14
VSB36 16
VSB48 ** 21
VSB1816 6
VSB2418 * 9
VSB3018 11
VANITY SINK BASE CABINET
21” deep; double doors; no drawer; butt doors * This size comes with single door. ** VSB48 comes with 2 false fronts.
34½
21
VANITY BASE CABINET Cubes
VB15 7
VB18 8
21” deep; single door; one drawer. 34½
21
Cubes
VDB12 6
VDB15 7
VDB18 8
VANITY DRAWER BASE CABINET
21” deep; four drawers.
21
34½
Cubes
VDT36 3
UNDERMOUNT DRAWER
21” deep; undermount drawer; trimmable to 24” wide.
21
36
6-3/8” 4-1/4”
ACCESSORIES
Page 10 800-234-WOLF (9653) Subject to change without notice - 3/1/12
24
30 8
Standard Hood - HOOD Includes BROAN 250CFM Ventilation Module
24
30 8
Hood w/Trim- HOODT Includes BROAN 250CFM Ventilation Module
Decorative rail ships loose. Hood may be used with or without rail.
6
12
Organizer - ORG36 12” Deep; 6” high; matching interior
36
18
30 12
Wine Rack - WR30 12” Deep; 18” high; matching interior
30
18
Plate Rack - PR30 12” Deep; 18” high; matching interior
12
8
8
Bar Bracket
Some items are not designed to hold glazing. In these cases, the item will not have visible decorative glazing .
ACCESSORIES & HOODS
Cubes
PR30 4
WR30 4
ORG36 2
BARBRACKET 0.5
HOOD 4
HOODT 4
Cubes
FF330 * 1
FF630 * 1
FWF336 1
FWF636 1
FWF342 1
FWF642 1
FF396 1
FF696 1
FLUTED FILLER Cubes
F330 * 1
F630 * 1
WF336 1
WF636 1
WF342 1
WF642 1
F396 1
F696 1
STANDARD FILLER
F330 & F630 may be used for either bases or 30” walls. Flutes begin 1-3/4” from each end of the filler. All fillers are 3/4” thick. Some items are not designed to hold glazing. In these cases, the item will not have visible decorative glazing .
SPICE RACK PULL OUTS
Plain Front Cubes
WPOP3x30 1
WPOP3x36 1
WPOP3x42 1
BPOP3x30 2
Fluted Front
WPOF3x30 1
WPOF3x36 1
WPOF3x42 1
BPOF3x30 2
3
Wall: 30 36 42
Base:
30
Fluted Front
3
Wall: 30 36 42
Base:
30
Plain Front
Includes field-applied filler. This item must be installed between two cabinets.
Cubes
V549RA 0.25
V549ST 0.25
V573RA 0.25
V573ST 0.25
VALANCE
Some items are not designed to hold glazing. In these cases , the item will not have visible decorative glazing . All valances are 3/4” thick.
5
49 73
Straight Valance
Roman Arch Valance
5
49 73
6.25
6.25
Includes field-applied filler. This item must be installed between two cabinets.
Page 11 800-234-WOLF (9653) Subject to change without notice - 3/1/12
PANELS
Cubes
P4836 1 Finished End Panel -- 48” x 36” x 1/4” (grain runs with 36”)
P4896 1 Finished End Panel -- 48” x 96” x 1/4” (grain runs with 96”)
BP4896 1 Finished Beaded Panel -- 48” x 96” x 1/4” (not available with Glaze) (bead runs with 96”)
REFP24 ** 2 Finished Refrigerator Panel -- 24” x 96” with 1-1/2” stile -- 1/2” vinyl laminate panel
REFP30 ** 3 Finished Refrigerator Panel -- 30” x 96” with 1-1/2” stile -- 1/2” vinyl laminate panel
DWP3 ** 2 Dishwasher End Panel with 3” filler -- 24” , 34-1/2” with 3” stile -- 1/2” vinyl laminate panel
DWP6 ** 3 Dishwasher End Panel with 6” filler -- 24” x 34-1/2” tall with 6” stile -- 1/2” vinyl laminate panel
SEP ** 2 Sink End Panel -- 12” x 30” with 1-1/2” stile -- 1/2” vinyl laminate panel
PANELS
= Some items are not designed to hold glazing. In these cases, the item will not have visible decorative glazing . *
N/A = Order standard Crimson for this item
** Panels are finished to match with vinyl laminate on “face” side only Inner side finished in natural vinyl laminate on stained products Inner side finished in white vinyl laminate on painted products
DECORATIVE END PANELS
Cubes
DWEP30 2 Decorative End Panel for 30” Wall Cabinet
DWEP36 2 Decorative End Panel for 36” Wall Cabinet
DWEP42 2 Decorative End Panel for 42” Wall Cabinet
DEPVB 2 Decorative End Panel for Vanity Base Cabinet
DEPB 2 Decorative End Panel for Base Cabinet
Saginaw - Standard Overlay
DWEP30 -10 x 28 DWEP36 -10 x 34 DWEP42 -10 x 40 DEPVB - 19 x 28 DEPB - 22 x 28
Dartmouth & Hudson - Full Overlay
DWEP30 -11 ¼ x 30 DWEP36 -11 ¼ x 36 DWEP42 -11 ¼ x 42 DEPVB - 20 ¼ x 29 DEPB - 23 ¼ x 29
MOULDINGS
MOULDING
Some items are not designed to hold glazing. In these cases, the item will not have visible decorative glazing.
2-1/4” SMCROWN214 2-1/4” Crown; 8 foot long pieces; sold by the piece
2-1/4” SSMCROWN214 -- for full overlay 2-1/4” Full Overlay Crown. Seated on top of cabinet with 3/8” top nailing flange; 8 foot long pieces; sold by the piece
3/4” MLR Light Rail; 8 foot long pieces; sold by the piece
MQR Quarter Round; 8 foot long pieces; sold by the piece
MOCW Outside Corner; 8 foot long pieces; sold by the piece
3/4” MBAT Batten; 8 foot long pieces; sold by the piece
MICW Inside Corner; 8 foot long pieces; sold by the piece
3/4” MROPE Rope Inlay; 8 foot long pieces; sold by the piece
5/8”
MDENTIL Dentil Inlay; 8 foot long pieces; sold by the piece
3” ROS3 3” Rosette; sold individually
6” ROS6 6” Rosette; sold individually
4-1/2” FB 4-1/2” Furniture Base; 8 foot long pieces; sold by the piece
4-1/2” TOEKICK 4-1/2” Toekick; 8 foot long pieces; sold by the piece ; matching vinyl paper finish
SLGCROWN4 -- for full overlay 4” Full Overlay Crown. Seated on top of cabinet with 3/8” top nailing flange; 8 foot long pieces; sold by the piece
4” LGCROWN4 4” Crown; 8 foot long pieces; sold by the piece
4”
CCROWN134 1-3/4” Cove Crown; 8 foot long pieces; sold by the piece
1-3/4” 3/4” MSW Scribe; 8 foot long pieces; sold by the piece
Page 12 800-234-WOLF (9653) Subject to change without notice - 3/1/12
Page 13 800-234-WOLF (9653) Subject to change without notice - 3/1/12
WOLF Classic Cabinets Five-Year Limited Warranty WOLF Classic Cabinets have been manufactured under the highest standards of quality and workmanship.
FIVE-Year Limited Warranty on Cabinets, Drawer Guides and Hinges
WOLF warrants to original consumer purchasers for five years from date of original purchase that cabinets, drawer, drawer guides and hinges used in the manufacture of WOLF Classic Cabinets shall be free from defects in material and workmanship under normal use.
General Warranty Guidelines
Should WOLF Classic Cabinets fail during the applicable warranty period due to defects in the material or workmanship under normal use, WOLF, in its discretion, will repair or provide the parts necessary to replace the defective products.
This warranty is only applicable to products used in residential applications in the United States and is not transferable.
This warranty does not cover products that are misused, abused, mishandled, improperly installed, improperly stored, changed, modified or subject to extreme temperatures or extreme moisture levels, or normal wear and tear. This warranty is not valid for products used for any purpose other than the purpose for which they were originally intended. This warranty does not cover the cost of installation, removal, subsequent damage or transportation of the defective product, regardless of whether the work was performed by a contractor, service company or the consumer.
Variations in color and grain pattern are a natural characteristic of wood. Color changes also may result from exposure to light, heat, smoke, household cleaners, and other elements and environmental conditions that are part of the aging process. These material variations and changes are not covered by this warranty. WOLF reserves the right to substitute discontinued product with the most similar product in styling, wood species and color available at the time a claim is submitted.
Paint finishes are uniquely different from standard wood finishes. On all wood products, expansion and contraction are typical due to changes in climate conditions. Due to this normal movement, paint finishes may develop slight separation lines, finish breaks and seam lines. With use of selected hardwoods and veneers, some grain pattern and wood characteristics (checks, pin knots) as well as seams and joints will remain visible through the paint finish. Over time, there may be a slight color shift, due to exposure to natural and artificial light. These normal conditions are not considered quality defects and are not covered by this warranty.
THIS WARRANTY IS THE EXCLUSIVE WARRANTY OF WOLF AND IS IN LIEU OF AND WOLF DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state.
To submit a claim under this warranty, contact your nearest WOLF Classic Cabinets dealer or send a letter explaining the defect along with photos and a dated sales receipt as proof of purchase to the address below.
WARRANTY
WOLF Classic Cabinets • Attn: Warranty Claims 3400 West Market Street • York, PA 17404
ph: 800-234-9653 • fx: 717-792-4052
WCCSpcOnly V1 3-2012