product starter kit · 2021. 1. 11. · clean cut foamy cutting oil 891.7292 - 15.25 oz product...

p r o d u c tstarter kit

3WINZER.COM2

TABLE OF CONTENTSCHEMICALS

High-Strength Threadlocker...................3

Polylube 255..................................................4

Clean Cut........................................................5

Break-Thru.....................................................6

Full Contact....................................................7

Tek Orange....................................................8

Super 300.......................................................9

Pro-Mix Seam Sealer Gray.....................10

Rust-Kon ......................................................11

Etch-Weld Green.......................................12

KR-900 & KP-950......................................13

Fastball - Tech Sheet....................... . . . . 14

Superball - Tech Sheet.............................16

Mr. Orange - Tech Sheet........................18

Bare Knuckle - Tech Sheet....................20

CUTTING TOOLS

Why Choose ShopPro®...........................21

ShopPro® Mechanics Bits......................22

ShopPro® Taps...........................................23

Wolverine Jobber Bits.............................24

WELDING

220MS......................................................... .25

1116LH................... .....................................26

Star Shield...................................................27

At Winzer, we understand that today’s marketplace revolves around a seamless supply chain and dedication to details. Our unique franchise-owned business model empowers your local representative to provide the ultimate solution to your business. Winzer brings you an unmatched range of products, supplies and solutions. With the industry’s most knowledgeable and tenured sales force, a partnership with Winzer offers unmatched service, customer relations and creative answers to your business needs. Our success comes from the success of our customers. Our local franchisees are here to provide you with the products you need when your job demands them, and our custom tailored bin-stock solutions put your most important products directly at your fingertips.

Whatever your challenge may be, Winzer can help you reach your individual goals and help you plan for the future...at Winzer, we are “Service That Works!®”

3WINZER.COM2

HIGH-STRENGTH RED THREADLOCKERIdeal For• Offices• Industrial• Manufacturing• Public utilities• Automotive• Energy and power plants

• Marine• Transportation• Chemical plants• Factories• Machine shops• Schools

Applications• Cylinder block and rocker arm studs• Ring gear bolts• Frame bolts• Shock absorber bolts• Locks and seals

• Threaded fasteners• Throttle linkages• Alternators• Ring and pinion bolts• Retains and seals lip seats

Features• 15-25 minute cure time• Temperature range: -60ºF to 300ºF (-54ºC to 149ºC)• Meets MIL-A-4605C Type II, Grade K• Fasteners up to 1” diameter (10mm to 25mm)• Prevents threads from rusting and leaking• Removable with hand tools for easy disassembly

BenefitsHigh-strength Red Threadlocker for heavy-duty applications 3/8” to 1” diameter. Especially well-suited for permanently locking studs and press fits. Adds holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal.

Compares to• Loctite® 271• Permatex® 271• ND Industries® 1405• Pacer® ANL-71

HIGH-STRENGTH RED THREADLOCKER | RTL2710889.2415 - 50 ml

PRODUCT DEMONSTRATION

DescriptionHigh-Strength removable grade threadlocker for locking and sealing metal fasteners larger than 1/4” and up to 3/4” diameter. Seals against leakage and corrosion via thread path. All-purpose strength for most general-purpose applications. Prevents from vibration loosening.

• ALWAYS FOLLOW DIRECTIONS• WEAR PROPER SAFETY EQUIPMENT TO PREVENT INJURY• PRACTICE PRODUCT DEMONSTRATION BEFORE PRESENTING

TO CUSTOMER

Materials • 1 Bottle of RTL2710 (889.2415)• 2 Bolts (075.14.2)• 2 Nuts (330.02.14)

Procedure1. Have customer thread one nut on to a bolt.2. Thread nut to end of bolt.3. Apply threadlocker to the middle threads.4. Thread nut to treated area.5. Allow to sit for 10 minutes.6. It typically takes 1 hour for product to be fully “locked in”, however the nut

should be adhered to the bolt.7. Ask customer to try and unfasten bolt; bolt should be very snug or locked

in, depending on temperature.

Optional Procedure1. Ask customer if they have any loose fasteners they would like to try the

product on.2. Apply product to threads of fastener.3. Secure bolt in threadlocker treated area.4. Allow product to sit for 10 minutes.

* If using Blue Threadlocker, threads can be “cracked” using a wrench; if using Red Threadlocker, it will require special tools and equipment to crack the threads.

What does this demo show?This demonstration shows how threadlocker locks in fasteners. They are used to prevent failure when threaded fasteners disassemble themselves as a result of vibration, heat, impact, and/or inadequate locking devices. Chemical threadlockers are a recommended alternative to locking hardware.

DANGER: Chemicals may be harmful or fatal if swallowed. May cause eye, skin and respiratory irritation. Keep out of reach of children. For professional and industrial applications only.

See Material Safety Data Sheet (MSDS) for more information.

5WINZER.COM4

POLYLUBE 255Ideal For• Industrial• Construction• Factories• Public utilities• Marine

• Packaging plants• Printing plants• General maintenance facilities• RV dealers and repair shops• Automotive repair shops

Applications• Open gears• Chains and cables • Meter boxes• Utility applications• Metal working operations

• Non-ferrous and ferrous metals • Marine• Automotive• Industrial • Commercial conveyors

Features• Gel consistency • Maximum penetration• Sets up fast• Covers completely and

adheres tenaciously• Excellent clinging properties • Resists wash-off and squeeze-out

• Meets federal specification VV-P-216 • Superior loosening of frozen

metallic parts • Contains PTFE • Added friction resistance• Operating Temperature:

-30° F to +500° F

BenefitsPolylube 255 is a clean, transparent lubricant with excellent penetrating and adhesive properties. The adhesive strength insures that when properly applied, the lubricant will stay in place and resist throw-off, wash-off and high-pressure vibrations. Polylube 255 adheres tenaciously under the most severe conditions. It will not pull off gear teeth, chain linkage, rollers, sprockets, etc. A unique rust preventative additive coupled with a combination of lubricants makes this formula rust and corrosion resistant, as well as being able to service a wide temperature range (-30° F to +500° F). The gel consistency in combination with a fast evaporating solvent allows for maximum penetration, for loosening frozen metal parts prior to the formation of a grease-like transparent protective gel coating. Contains PTFE for added friction reduction. Resists water washout and weathering.

Compares to• Wurth HHS 2000• Gel Lubricant (Crest, Kent, Lawson, etc)

POLYLUBE 255 | GEL LUBRICANT W/ PTFE891.255 - 13 oz


DescriptionWinzer’s Polylube 255 Clear Gel Lubricant with PTFE is an ideal lubricant for hundreds of automotive, fleet, trucking, marine and industrial applications. This transparent, high-pressure, high-temperature, high-adhesive strength penetrating grease, is a unique combination of natural and synthetic lubricants coupled with a high molecular weight polymer, which offers superior lubrication and corrosion protection.


TO CUSTOMER

Materials • 1 Can of Polylube 255 (891.255)• 1 Demo panel (979.8901)

Procedure1. Using a metal panel held vertically, spray a small amount of gel lubricant

onto the panel at the very top.2. Observe how fast the formula sets up and forms the gel consistency, that

penetrates and protects. 3. As the solvent evaporates quickly, spread the formula around the surface of

the panel and explain the features and benefits. 4. Now attempt to wash away the gel lubricant under the velocity of a hot and/

or cold water spigot. It won’t wash off! It even has reasonable resistance to removal by solvent spray.

What does this demo show?This demonstration shows that Polylube 255 is an extremely sticky gel lubricant that sprays out thin and sets up quick to penetrate and protect.



5WINZER.COM4

CLEAN CUTIdeal For• Industrial• Construction• Factories• Public utilities• Marine

• Packaging plants• General maintenance facilities• RV dealers and repair shops• Automotive repair shops

Applications• Drill bits• Taps• Reamers• Turret lathes• Boring and milling operations

• Drilling• Cutting• Sawing • Threading• Ferrous and non-ferrous metalsNote: Not recommended for aluminum application.

Features• Significantly extends cutting tool life• Speeds the cutting

process dramatically• Holes are cleaner and more precise• Excellent for drilling and reaming

• Eliminates galling and seizing due to friction and heat• Effective for most metals, including

exotic and high-strength metals• Evaporates completely and leaves

no oil or residue

BenefitsClean Cut is designed for drilling, tapping and thread cutting. This formula was created specifically to prevent distortion and increase tool life when applied to stainless steel, brass, copper, allied metals and alloys. It is highly recommended for all types of drilling, tapping and reaming applications. It is also used in pipe threading applications for better product, quality and reduced work time.

Compares to• Kwik Kool, CRC True Tap, Tifco Kleen-Kut, Lawson Kwikut, Zep Lubeze Drill Chill,

Rust Release

CLEAN CUT FOAMY CUTTING OIL891.7292 - 15.25 oz


DescriptionWinzer’s Clean Cut Foamy Cutting Oil was created specifically to prevent distortion and increase tool life when applied to stainless steel, brass, copper, allied metals and alloys. It is highly recommended for all types of drilling, tapping and reaming applications. It is also used in pipe threading applications for better product, quality and reduced work time.


TO CUSTOMER

Materials • 1 can of Clean Cut Foaming Cutting Oil• 1 stainless steel demo plate

Procedure1. Hold the demo plate flat and spray a small amount, about the size of a

quarter, onto the plate.2. Tilt the plate and point out that the foaming cutting oil is foamy; pointing out

that it dissipates heat quickly.3. When it changes from foam to a thin fluid, and can run the full length

of the plate, point out that this allows it to flow quickly to the cutting area to cool and lubricate.

4. Turn the can upside down and spray onto the plate, pointing out that thisproduct can be used from any position.

What does this demo show?This demonstration shows how Clean Cut’s foamy action clings to most surfaces at any angle, allowing it to cool cutting tool temperatures and increase the smoothness of the cut.



7WINZER.COM6

BREAK-THRUIdeal For• Industrial• Construction• Factories• Public utilities• Marine• Packaging plants

• Printing plants• Garment and textile plants• Molding operations• General maintenance facilities• RV dealers and repair shops• Automotive repair shops

Applications• Starting wet engines• Freeing nuts and bolts• Electrical panel boards• Drying out ignition wires• Parking meters• Motors• Wire cable

• Rusted parts• Machine parts• Door hinges• Locks• Battery terminals• Vending machines• Refrigeration equipment

Features• Clear penetrating lubricant and

moisture displacer• Non-flammable and non-conductive• 30,000 volt dielectric strength (30 KV)• Protective lubricant prevents rust

and corrosion

• Meets MIL Spec C-2344• Silicone-free formula• Drives off moisture – effective on dry

or wet surfaces• VOC-compliant in all 50 states

including California

BenefitsBreak-Thru is designed to function as a smooth, dry and greaseless, colorless film lubricant for all types of surfaces. Used in the packaging and food processing industry. It leaves a non-staining, dry, pure silicone film to lubricate moving parts, reducing friction and wear. Product is heat stable from -450° F to +450° F. Break-Thru is formulated as a release agent on seals, o-rings and gaskets. Lubricates all sliding surfaces. Ideal in the textile industry where cleanliness and non-contamination are critical.

Compares to• WD-40®• PB B’Laster®• LPS-1®• Moovit Cling Penetrating Lubricant™• Zep Aid• Zepreserve

• CRC Screwloose®• State Pen• Kimball Midwest Torq CB• Lawson Rusty• Lawson Open & Shut

BREAK-THRU | NON-FLAMMABLE PENETRATING LUBRICANT891.7235 - 16 oz

891.7235.1 - 12 x 16 oz


DescriptionWinzer’s Break-Thru is clear penetrating lubricant and moisture displacer. Non-flammable, non-conductive, with a dielectric strength of 30,000 volts. Protective lubricant prevents rust and corrosion. Powerful penetration of moisture and rusted parts.


TO CUSTOMER

Materials • Break-Thru (891.7235)• PB B’Laster (891.47)• WD-40 (891.3999)• 3 styrofoam coffee cups• Water bottle (filled)• 2-cup measuring cup (or similar size container)

Procedure1. Fill all three cups half way with water.2. Grab the can of WD-40; remove cap and spray into cap until half full.3. Dump this into first cup filled with water (nothing will happen).4. Grab the can of PB B’Laster; remove cap and spray same size amount

into cap.5. Dump this into second cup filled with water (not much will happen).*6. Get measuring cup out and ready.7. Grab the can of Winzer Break-Thru; remove cap and spray same size

amount into cap.8. Dump this into third cup, quickly move cup over measuring cup.9. Within 30 seconds Break-Thru will penetrate through the water

and styrofoam.* After several minutes PB B’laster may weaken cup and a leak will start

What does this demo show?How quickly our product penetrates to source, while the competition is found floating on top.



7WINZER.COM6

FULL CONTACTIdeal For• Offices• Industrial• Manufacturing• Public utilities• Automotive

• Energy/power plants• Marine• Transportation• Factories • Machine shops

Applications• Audio/video• Computers• Cables• Rechargeable devices• Switches

• Plugs/sockets• Batteries• Lighting• Electronics • Industrial equipment

Features• Non-conductive• Safe on plastics, will not harm the ozone• No CFC’s or HCFC’s• Dries quickly• Leaves no residue

BenefitsFull Contact is a highly effective blend of solvents that are fast drying, non-conductive and safe to use on plastics, rubber and metal. This product works quickly to remove oil, grease, dirt and grime from circuit boards, computers, magnetic tapes, printed circuits, gauges, switches and relays. Does not contain CFC’s or HCFC’s and is ozone safe. This product is extremely flammable and must only be used on equipment that has been de-energized. It also must be allowed to dry and fumes evacuated from equipment before re-energizing.

Compares to• CRC QD Contact Cleaner• Lawson Power Off• Kimball Midwest Circ-Kleen 2• Zep Elec II• Zep Dyamo• Permatex Electrical Contact Cleaner

FULL CONTACT | CONTACT & CIRCUIT BOARD CLEANER891.7110 - 11 oz


DescriptionWinzer’s Full Contact Circuit Breaker and Contact Cleaner is a highly effective blend of solvents that are fast drying, non-conductive and safe to use on plastics, rubber and metal. This product works quickly to remove oil, grease, dirt and grime from circuit boards, computers, magnetic tapes, printed circuits, gauges, switches and relays. Does not contain CFC’s or HCFC’s and is ozone safe. This product is extremely flammable and must only be used on equipment that has been de-energized. It also must be allowed to dry and fumes evacuated from equipment before re-energizing.


TO CUSTOMER

Materials • 1 can of Full Contact (890.7110)• 1 styrofoam cup

Procedure1. Spray some of the Full Contact into the styrofoam cup.2. Point out to your customer how these solvents do not attack the styrofoam.3. Explain to your customer how Full Contact will remove oil, grease, dirt, and

grime from sensitive areas without harming plastics.

What does this demo show?This demonstration shows how fast-drying Full Contact works quickly and is plastic-safe.



9WINZER.COM8

TEK ORANGEIdeal For• Fleet depots• Transportation• Automobile dealers • Car rental centers• Autobody/ collision repair• Automotive• Farming and agriculture • Industrial• Construction• Mining/quarries

• Railroads• Manufacturing• Factories• Public utilities• Steel mills• Energy/power plants• Marine• Chemical plants• Machine shops

Applications• Auto• Power mower• Marine• Tractor• Gasoline

• Diesel engines• Metal• Painted surfaces• Concrete • Industrial equipment

Features• Gel-base based formula clings

to surfaces• Penetrates and emulsifies oil, grease,

tar and asphalt• Spray on, let it clean, then wash off

with water

• No strong solvents• Natural citrus solvent base• No offensive odor• Helps maintain vehicles

and equipment

BenefitsConcentrated blend of organic solvents in a gel base. The gel base allows the product to cling to vertical surfaces. It works quickly to penetrate and emulsify tar, asphalt, grease and oil. It washes off with water or solvent. This product is safe and easy to use. Does not contain 1,1,1 Trichloroethane, CFC’s or petroleum distillates. For use on tar, grease, oil, asphalt based roofing compounds and asphalt-based cements. Areas of use include: automobile dealers, machine shops, industrial manufacturing, factories, fleet maintenance shops and marine equipment.

Compares to• Gunk Engine Brite• Orange Degreaser

TEK ORANGE | GEL DEGREASER891.351 - 15 oz


DescriptionConcentrated blend of organic solvents in a gel base. The gel base allows product to cling to vertical surfaces. It works quickly to penetrate and emulsify tar, asphalt, grease and oil. It washes off with water or solvent. This product is safe and easy to use. Spray on and wash off with water. Does not contain 1,1,1 Trichloroethane, CFC’s or petroleum distillates. For use on tar, grease, oil, asphalt based roofing compounds and asphalt based cements. Areas of use include: automobile dealers, machine shops, industrial manufacturing, factories, fleet maintenance shops and marine equipment.


TO CUSTOMER

Materials • 1 can of Tek Orange (891.351)• 1 3”x 6” aluminum demo plate (979.8902)• 1 can of King Pin open gear lubricant (891.7265)

Procedure1. Hold stainless steel demo plate flat, coat with King Pin lubricant.2. Spray Tek Orange on top of King Pin; point out how rapidly the Tek Orange

turns black, as it emulsifies the lubricant. 3. Use a paper towel or a shop rag to wipe the plate clean, showing that the

Tek Orange lifts all the oil from the surface using emulsification.4. Point out that the product has a pleasant smell and leaves no residue.

What does this demo show?This demonstration shows how Tek Orange quickly penetrates and removes grease and grime.



9WINZER.COM8

SUPER 300Ideal For• Industrial• Construction• Factories• Public utilities• Marine• Packaging plants

• Printing plants• Garment and textile plants• Molding operations• General maintenance facilities• RV dealers and repair shops• Automotive repair shops

Applications• Signs• Fasteners• Auto parts• Moldings• Electronics• Wiring• Vinyl/upholstery• Tools

• Equipment• O-rings and gaskets• Tubing and hoses• Dashboards• Tail lights• Knobs• Pipes• Furniture

• Woodwork• Tires• Belts• Emblems• Displays• Bumper covers

Features• Gap filling instant adhesive• Cyanoacrylate adhesive• Thicker than most general-purpose “super glues”• Fast curing and bonding• Conforms to MIL-SPEC A-46050C Type II Class 2• Operating Temperature: up to 225° F • Viscosity: 300 cP• Gap fill: .006”• Clear color• Bonds to: metal, rubber, plastics, glass, wood, ceramic, cloth

BenefitsSuper 300 instant adhesive has a higher viscosity, allowing a greater resistance to flow, performing as a thicker material than most other cyanoacrylate adhesives. It has superior strength and fast curing/bonding. It has excellent gap filling properties for bonding small parts which do not have a perfect fit. For ultra-fast curing use Winzer’s Super 300 Accelerator.

Compares to• SEM Insta-Bond Adhesive• High Strength Super Glue• Kent Super Bond• Crest Insta-Bond

SUPER 300 | INSTANT ADHESIVES889.460 - 0.25 oz

889.461 - 1 oz890.466 - 6 oz


DescriptionWinzer’s Super 300 instant adhesive is thicker than most general-purpose “super glues”. It has superior strength and fast curing/bonding. Excellent gap filling properties for bonding small parts which do not have a perfect fit. Conforms to MIL-SPEC A-46050C TYPE II, CLASS 2. For ultra-fast curing use Winzer’s Super 300 Accelerator.


TO CUSTOMER

Materials • 1 bottle of Super 300 Instant Adhesive (889.460)• 1 can of Super 300 Accelerator (889.466)• 2 business cards

Procedure1. Take one business card and spray half of card with Super 300 Accelerator.2. Take other business card; add a thick 1/2” bead of Super 300 on the edge.3. Combine the two business cards so that the accelerator and

Super 300 touch.4. Allow product to “kick off”; you should feel the cards getting warm.5. After 15 seconds you can hand the cards to your customer.6. Ask your customer to pull the cards apart.

What does this demo show?This demonstration shows how quickly the Super 300 can be used and the strength of the bond. Don’t forget to order Super Solvent De-Bonder (889.470) just in case you get some adhesive on your fingers!



11WINZER.COM10

PRO-MIX SEAM SEALER GRAYIdeal For• Fleet depots• Construction• Autobody/collision repair• Farming and agriculture • Industrial• Mining/quarries• Railroads• Manufacturing• Public utilities

• Steel mills• Automotive• Energy/power plants• Hospitals/Medical• Marine• Transportation• Pulp/Paper• Chemical plants

Applications• Marinas• Cars, buses, trailers and trucks• Outdoor furniture• Tools• Buildings• Steel windows• Farm machinery

• Sheet metal and welds• Bare metal (aluminum steel, etc.)• Chrome• Stainless steel• Galvanized steel• Plastics• Difficult-to-bond surfaces

Features• Instant cure urethane• Multi-purpose• High-strength bonding• Ideal for bumper tab repairs

• Color: Black• Use static mixer: (891.0117)• Mini dual-mix gun: (891.0116)

BenefitsIdeal instant urethane adhesive for automotive and industrial bonding applications that can be quickly assembled. Instant 50 Black is an excellent choice for quickly repairing bumper brackets, tabs, headlight buckets and grills. It may also be used for bonding backer panels, moldings, emblems and most small plastic, metal and aluminum parts. Also great for bonding many industrial repairs.

Compares to• Wurth Fixall & Super Fast

Urethane Adhesive• SEM Mini Max Bumper Repair• Mini Max General Purpose Repair• & Quick-set 50• Lord Fusor Plastic Panel Cosmetic

Repair #102

• Plastic Finishing Adhesive #114 • Plastic Bonding Repair Adhesive

#141/140• & Extreme Bumper Repair Adhesive

#142/143• Kent Ure-Set & Quick-Bond• Transtar #4162 & #4164

• Crest Qwik Set• Plas Ter & Blax Ter• Duramix #4247• #4747 & #4030• 3M Automix Fast Cure#8107

PRO-MIX INSTANT 50 BLACK891.0231 - 1.7 oz


DescriptionIdeal instant multi-purpose urethane adhesive for automotive and industrial bonding applications that can be quickly assembled. INSTANT 50 BLACK is an excellent choice for quickly repairing bumper brackets, tabs, headlight buckets and grills.


TO CUSTOMER

Materials • Etch-Weld Green (890.7760)• Instant 50 Black Adhesive (891.0132)• Mini Dual-Mix Gun (891.0116)• Quick-Set Adhesive (891.0123)• 7oz Dual-Mix Gun (891.0111)• 3”x 6” steel panel (979.8903)• Masking tape (820.26334)• 5/16” diameter bolt

TECHNICAL DATA

Instant Adhesive Procedure(Instant 20 Adhesive may also be used, 891.0133)1. Follow cartridge balancing procedures (included with adhesive).2. Add dime size drop of adhesive over the Q-shaped hole in panel.3. Moving quickly, put bolt onto adhesive.4. “Build” adhesive to surround half of the bolt from the base of the panel up.5. Allow 5 minute cure time to show off Instant Adhesives hardness and

strength; in the meantime, jump to seam sealing procedure below.

Seam Sealing Procedure(Seam Sealer 10 may also be used, 891.0124)1. Follow cartridge balancing procedures (included with adhesive).2. Lay small bead of adhesive/sealer between strips of masking tape.3. Peel up corner of masking tape; and slowly pull up and away adhesive sealer.4. Do same with other strip of tape. This will show how quickly the a bead or

seam will form.5. It will take 5-15 minutes for product set-up and 20-30 for product to cure.

What does this demo show?• Texture and OEM E-coat color match of Etch-Weld Green• The instant bond of the Winzer Instant Adhesives• The quickness of bead forming with Winzer Seam Sealers



Description TimeWork time @ 70ºF (21ºC): 30 - 50 secondsFirm set time @ 70ºF (21ºC): 50 - 60 secondsPaint/sand time @ 70ºF (21ºC) 5 minutes

11WINZER.COM10

RUST-KONIdeal For• Automotive and motorcycles• Industrial• Metal working and fabrication• Agriculture and farm equipment• Construction• Factories

• Public utilities• Marine• Packaging plants• General maintenance facilities• RV dealers and repair shops• Railroads

Applications• Iron work• Storage tanks• Fencing• Tools• Grinding

• Drilling• Milling and reaming• Cutting• Sawing • Ferrous and non-ferrous metals

Features• Chemically destroys rust • Converts rust into a black, paintable polymer • Kills active rust • Seals surface to prevent further rust and corrosion • Seals and protects rusted metal surfaces • Compatible with most paints, body fillers and other topcoats • Temperatures: up to 350° F • No CFC’s or ozone-depleting compounds

BenefitsRust-Kon Rust Treatment is the quick and convenient way to treat rusted surfaces. This product chemically converts the rust to an inert black polymer based coating that prevents future rust from forming. Eliminates the need for brushing, sandblasting or scraping before painting rusted surfaces.Once treated, surface may be left unpainted or may be painted for improved appearance and protection. May be used on all rusted surfaces. Convenient spray can allows for quick, mess-free application. Combines a unique fast drying carrier with special rust converting agents and a strong polymeric coating.

Compares to• Revive• Conquest • Ospho• Permatex 81849• Duplicolor RF129 / 2PE17

• Loctite Extend 442-30539 / 75430 & 1YDZ7

• Rust Oleum Rust Reformer & 5HE25

• One Step Rust Converter

• Krylon Outdoor Spaces• Tifco Renew• Kimball Midwest Rust Master• Lawson Rust Prep Plus• 3M Rust Converter

RUST KON | PROFESSIONAL RUST TREATMENT891.1750 - 15 oz


DescriptionRust-Kon Rust Treatment is the quick and convenient way to treat rusted surfaces. This product chemically converts the rust to an inert black polymer based coating that prevents future rust from forming. Eliminates the need for brushing, sandblasting or scraping before painting rusted surfaces.


TO CUSTOMER

Materials • 1 steel pipe or plate (979.8903)• 1 can of Rust-Kon (891.1750)

Procedure1.Demo Preparation: Allow steel pipe or plate to rust. This process can be speed up by mixing a salt water solution and spraying regularly. 2. Several days prior to sales call, spray rusted surface with Rust-Kon.3. Begin by removing loose rust particles with a rag or brush.4. Shake can for 30 seconds.5. Hold can 8-12 inches from surface; apply a thin coat of Rust-Kon in a

sweeping motion over half of the area.6. Allow to dry. Treat surface a second time.7. The surface will turn gray/black.8. Allow at least 48 hours for surface to fully cure (for best results).

What does this demo show?This demonstration shows how Rust-Kon the metal has turned black and has a polymeric coating that will prevent further corrosion. The surface can now be left unpainted, or may be painted for improved appearance and protection.

DANGER: Chemicals may be harmful or fatal if swallowed. May cause eye, skin, and respiratory irritation. Keep out of reach of children. For professional and industrial applications only.


13WINZER.COM12

ETCH-WELD GREENIdeal For• Fleet depots• Construction• Autobody and

collision repair• Farming and agriculture • Industrial• Mining/quarries

• Railroads• Manufacturing• Public utilities• Steel mills• Automotive• Energy/power plants• Hospitals/medical

• Marine• Transportation• Breweries• Pulp/paper• Chemical

Applications• Air conditioning

systems and fans• Piping• Sumps• Water tanks• Marinas• Cars, buses, trailers

and trucks• Outdoor furniture

• Tools• Gutters• Metal roofs• Buildings• Steel windows• Livestock equipment• Farm machinery• Sheet metal and welds• Chrome

• Bare metal (ex: aluminum, steel)

• Stainless steel• Galvanized steel• Cured paint• Body filler• Plastics• Other difficult to

bond surfaces

Features• Reduces welding spatter• No need to sand off prior to coating• Welding bead flows as if no weld

primer were used• Self-etching primer for excellent

adhesion to bare metal• Protects metals and welds

from rusting• Can be welded or top coated

in minutes• Impact-resistant

• Protects water-submerged steel• Ideal for spot repair and

overall refinishing• Water-resistant 15 minutes

after drying• Will not create excess MIG

weld spatter• Dry to touch: 10-15 minutes• Sanding time: 30 minutes• Dry time for top coat: 30 minutes

BenefitsEtch-Weld Green is a fast-drying, weld-thru and self-etch primer in one unique product. Unlike most weld-thru primers, it can be painted over. Etch-Weld Green works on all types of metals and will not burn away from the weld bead. It adheres to bare steel, aluminum, and stainless steel. Etch-Weld Green is ideal for refinishing and spot repairs. This product is compatible with primer surfaces and most automotive paint systems. Etch-Weld Green color matches the green factory e-coatings found on many European and Japanese vehicles.

Compares to• Rubber Seal Etch Weld• Rubber Seal Dual Prime• Seymour Self-Etching Weld Thru Primer• SEM Copper Weld• Tifco Corrosion Master

• Self-Etching Primer (Kent, Wurth, Crest, SEM, etc.)

• Weld-Thru Primer (Kent, Wurth, Crest, SEM, etc)

ETCH-WELD GREEN | SELF-ETCHING WELD-THRU PRIMER890.7760 - 11.5 oz


DescriptionEtch-Weld Green is a unique, fast-drying, weld-thru and self-etch primer in one product. A weld-thru primer that can be painted over. It works on all types of metals and will not burn away from the weld bead. It adheres to bare steel, aluminum, and stainless steel. For refinishing and spot repairs. Compatible with primer surfaces and with most automotive paint systems. Color matches the green factory e-coatings found on many European and Japanese vehicles.


TO CUSTOMER

Materials • 1 can of Etch-Weld Green • Aluminum foil

Procedure1. Preparation: Coat piece of aluminum foil with 3 light coats Etch-Weld Green.2. Allow to dry.3. Show your aluminum foil demo piece and point out that it is not sanded, then

lightly crumple the foil to show that even when it is stressed, it still adheres.

Clean-up ProcedurePurge can after use by inverting can and spraying to clear out valve and actuator tip.

What does this demo show?This demonstration shows how Etch-Weld Green is a unique, fast-drying primer that has weld-thru and self-etching properties. Color and texture match most factory e-coatings of import vehicles.



13WINZER.COM12

KR-900Ideal For• Offices• Industrial• Manufacturing• Public utilities• Automotive




Features• Hi-tech professional performance• Rejuvenate and improve performance on all electronic equipment• Chemically enhances connection• Removes oxides and sulphide residue, resin, oil and dirt• Does not contain halogens• Ideal on connectors, relays and contacts

BenefitsKontakt Reiniger, KR-900 – Adjustable valve, flushing action and safe on plastics. Lubricates contacts, dissolves oxidation and corrosion on metal surfaces, fills in microscopic gaps and reseals surface for better contact to enhance flow of electricity. Improves connector performance and reliability.

Compares to• Wurth Contact OL• Tech Spray’s Blue Shower• Chemtronics Electro Wash

KR-900891.7113

KP-950Ideal For• Offices• Industrial• Manufacturing• Public utilities• Automotive




Features• Ultimate in electronic protection• Protects all electronic connections and equipment• Chemically enhances connection• Removes metal residue, resin, oil and dirt• Does not contain acid, will not solidify• Does not contain halogens• Ideal on connectors, relays and contact

BenefitsKontakt Protektor KP-950 – Adjustable valve, flushing action and safe on plastics. Oxidation and corrosion deterrent. Improve conductivity and maintains optimum signal quality. Reduces wear and abrasion, arcing, RFI and intermittent connections. Improves connector performance and reliability. Ideal for severe environments.

Compares to• Wurth Contact OL• Tech Spray’s Blue Shower• Chemtronics Electro Wash

KP-950891.7114

15WINZER.COM14

TECHNICAL DATA SHEET

14 15WINZER.COM14

FASTBALLWATER-BASED CLEANER

DescriptionHigh-alkaline, butyl-based liquid degreaser. A perfectly balanced cleaner degreaser.

Advantages• Fastball is an all-purpose cleaner for any spray and wipe job from light-duty to heavy, gross soil• Just spray and wipe soil away• Removes dirt, grease, oily films, fingerprints, crayons, ink, pencil marks, smoke film, etc• Use on painted surfaces, walls, floors, cabinets, wall fixtures, countertops, vinyl upholstery, fiberglass surfaces• Use on carpet as a spot cleaner• Contains no ammonia or petroleum solvents. This product is designed for industrial and institutional use by trained

maintenance personnel• All directions and precautions must be followed exactly

CAUTION: KEEP OUT OF REACH OF CHILDREN

SpecificationsPhysical Form: LiquidColor: GreenScent: PineSpecific Gravity: 0.95Foam Test 1% Solution: 240mmpH as is: 12.6Total Solvent: 11%

Winzer Part No.991.51486 – Quart991.51486.1– Case of 12 Quarts991.51487 – Gallon991.51487.1 – Case of 4 Gallons

15WINZER.COM14 15WINZER.COM14


PurposeTo show how butyl-based degreaser work by penetrating and lifting heavy soils.


TO CUSTOMER

Materials • Panel• Chain and Cable Lube (Long Haul 891.7270)• Spray bottle (697.7402)

Procedure1. Spread a thin layer of dirty oil on flat panel (Recommendation: use chain

and gear lube on Formica surface). 2. Dilute product properly in a spray bottle (Recommendation: 10-to-1 on

concentrated products). 3. Spray the cleaner/degreaser on the soil. 4. Point out how the product penetrates through the soil, spreads over the

surface being cleaned and lifts it (brings it to the surface) so it can be wiped or rinsed away.

5. After wiping or rinsing, show that the surface is clean and film free.

Butyl solvent is a very good penetrator of grease and oil; it is not a very good emulsifier. Butyl-based products are very good for heavy-soil applications.



FASTBALL

17WINZER.COM16


16 17WINZER.COM16

DescriptionExtra heavy-duty cleaner degreaser cleans almost any surface quickly and easily. Penetrates and lifts oily, greasy spills.

Advantages• Excellent cleaner for a variety of surfaces: floors, walls, automotive parts, unpainted metal, engines, unpainted machinery, trucks, cars, whitewalls,

hoods, vents, grills, ovens, fans, plastic and vinyl upholstery and many more. • Rinses freely to prevent spotting non-abrasive.

Directions

NOTE: to all users in CALIFORNIA. SUPERBALL MUST be diluted 1 part product with no less than 8 parts water prior to use to meet .5% VOC for use as a general-purpose degreaser.

TO ALL USERS in OTC/LADCO STATES. SUPERBALL MUST be diluted 9 parts concentrate with no less than 1 part water prior to use to meet 4% VOC for use as a general-purpose degreaser.


SUPERBALLWATER-BASED CLEANER

Composition:1. Cleaning: dilute 1:10-1:20. Scrub the floor and rinse thoroughly;

Stripping: dilute 1:5 with hot water. 2. Apply to floor. Scrub with floor machine after a contact time of

approximately 5 minutes. 3. Rinse with warm water. Caution: do not apply undiluted SUPERBALL

to composition floors.

Terrazzo and Ceramic Tile:1. Cleaning: dilute 1:10-1:40 with hot water. 2. Scrub floor.

Concrete:1. Cleaning: Dilute 1:5- 1:20, depending on severity of soil. 2. Scrub well and rinse.

Automatic Scrubbing Machines:1. Cleaning, concrete degreasing and wax stripping: Use 3-6 oz of

SUPERBALL per gallon of water.

Steam Cleaning Machines:1. Cleaning: dilute 1:10-1:30 with water depending on severity of soil.

Plastic and Vinyl Upholstery: 1. Dilute 1:3-1:10. 2. Wipe or spray onto surface to be cleaned. 3. Let stand a few seconds and wipe with a clean, dry cloth.

Degreasing Automotive Parts: 1. Dilute 1:3-1:5 with hot water and rinse well. 2. Allow extremely oily surfaces to soak for 15-20 minutes and rinse

well with a strong stream of water.

Convertible and Vinyl Tops: 1. Dilute 1:1-1:5. 2. Using a stiff brush, scrub area thoroughly and

rinse well with water.

Whitewall Tires: 1. 1:1-1:5, depending on severity of soil. 2. Spray solution onto tires and let stand for

approximately one minute. 3. Rinse well with a strong stream of water. Obstinate soils may

require brushing.

SpecificationsPhysical Form: LiquidColor: Blue GreenScent: NoneSpecific Gravity: 1.08Foam Test 1% Solution: Initial — 170 mm, 5 minutes — 150 mmpH: 12.0-13.0Total Solids: 8%

Winzer Part No.991.51502 – Gallon991.51502.1 – Case of 4 Gallons



PurposeTo show how butyl-based degreaser work by penetrating and lifting heavy soils.


TO CUSTOMER

Materials • Panel• Chain and Cable Lube (Long Haul 891.7270)• Spray bottle (697.7402)

Procedure1. Spread a thin layer of dirty oil on flat panel (Recommendation: use chain

and gear lube on Formica surface). 2. Dilute product properly in a spray bottle (Recommendation: 10-to-1 on

concentrated products). 3. Spray the cleaner/degreaser on the soil. 4. Point out how the product penetrates through the soil, spreads over the

surface being cleaned and lifts it (brings it to the surface) so it can be wiped or rinsed away.

5. After wiping or rinsing, show that the surface is clean and film free.

Butyl solvent is a very good penetrator of grease and oil; it is not a very good emulsifier. Butyl-based products are very good for heavy-soil applications.



SUPERBALL

19WINZER.COM18


18 19WINZER.COM18

DescriptionNatural citrus water-based cleaner degreaser, drain cleaner, and deodorizer concentrate. This multi-purpose cleaner strips grease and heavy oil deposits from virtually any surface.

Advantages• Non-corrosive, non-flammable, contains no petroleum distillates. • The safe, powerful answer to those tough degreasing, cleaning, drain and grease trap maintaining, and odor control problems. • Use to: keep grease traps open, maintain drain flow, degrease trucks and heavy equipment, clean engine and parts, and remove tar and asphalt. • Leaves a fresh citrus scent.

DirectionsAll-Purpose Degreaser: Spray or mop on. Rinse thoroughly with water. Drain Maintainer: Add 3-4 oz to drain and let stand for 5-10 minutes. Flush with hot water.Grease Trap Maintainer: Pour 5 oz daily into grease trap. For traps over 20 feet capacity add 8-10 oz daily. Engine Degreasing, Parts Cleaner: Dilute 1:4. Brush or spray onto surface to be cleaned. Allow to stand for 3-5 minutes for deep penetration. Rinse thoroughly with clear water.Tar and Asphalt Removal: Apply undiluted to soiled surface by spraying or mopping. Agitate with brush if necessary until soil is emulsified. Rinse thoroughly with water. Do not allow degreaser to dry on surface.Pressure Washing Trucks and Heavy Equipment: Dilute 1:20. Spray solution on surface to be cleaned. Agitate heavily soiled areas with brush as necessary. Rinse with water. Do not allow degreaser to dry on surface. DO NOT USE ON GLASS.

Light-Duty Cleaning, dilute 1:40Medium-Soil, dilute 1:20Heavy-Soil, dilute 1:10


SpecificationsPhysical Form: Free Flowing LiquidColor: OrangeScent: CitrusSpecific Gravity: 1.00Foam Test 1% Sol: Initial – 55mmpH: 12.0 - 13.0 Total Solids: 8%Total Solvent: 5.2%

Winzer Part No.991.51483 – Quart991.51483.1 – Case of 12 Quarts991.102801 – Gallon991.102801.1 – Case of 6 Gallons

MR. ORANGEWATER-BASED CLEANER



PurposeTo show how non-butyl degreasers are superior emulsifiers in comparison to butyl-based cleaners.


TO CUSTOMER

Materials • 2 clear containers• Dirty oil• Sample of butyl-based degreaser

Procedure1. Put 1/8” of Mr. Orange and 1/8” of butyl degreaser into clear containers

(empty water bottles work great). 2. Add water to achieve approximately 30-to-1 ratio. 3. Add 10 drops of dirty crank case oil to each container and stir. Notice how

the oil added to the Mr. Orange solution is emulsified (it becomes part of the cleaning solution). The oil in the butyl-based solution does not emulsify and quickly comes to the top of the cleaning solution.

4. Now dip a paper towel into the container holding the butyl based cleaner. Notice how the oil remains on the surface of the towel. If this were a mop head, you would spread this oil back onto the floor.

5. Then dip the paper towel into the container of Mr. Orange. Notice how the oil is absorbed into the towel and not left on the surface. Also point out the fresh citrus scent.

Non- butyl products are very good emulsifiers, therefore work very well on lighter soil in mop bucket and auto scrub applications. Heavier soils often require the penetration that a butyl-based cleaner can provide.



MR. ORANGE

21WINZER.COM20


20 21WINZER.COM20

DescriptionFormulated with soy ingredients, d-Limonene and walnut shell scrubbers to quickly cut through the heaviest greases and oils, while not drying the skin.

Advantages• Removes all types of stubborn industrial soils: grease, oil, inks, adhesives, carbon, tar and asphalt• Utilizes renewable natural resources, helping to conserve non-renewable resources such as petroleum• Enriched with skin softening ingredients and aloe to prevent hands from drying out, keeping hands soft• Utilizes biodegradable soy oils, d-Limonene, detergents and walnut scrubbers• Natural walnut scrubber rinses freely and will not clog drains• Does not contain dye or perfume

Directions1. Apply hand cleaner to dry hands2. Work thoroughly through hands, knuckles and under fingernails3. Add water and work into lather4. Rinse well with water

SAFETY: MAY BE HARMFUL IF SWALLOWED. MAY CAUSE IRRITATION TO EYES. KEEP OUT OF REACH OF CHILDREN

SpecificationsPhysical Form: Viscous liquidColor: Light BeigeScent: CitrusSpecific Gravity: 0.97pH: BalancedEmollients/Conditioners: Soy, Aloe VeraShelf Life: 1 yearVOC Compliant: Yes

Winzer Part No.991.102804 – 1 Gallon991.102804.0 – 1 Pint991.102804.1 - 4 Case991.1028040 - 2 oz

BARE KNUCKLEWATER-BASED CLEANER


WHY CHOOSE ShopPro®?• Substantially longer cutting life. The nitro-carburized flute has an increased

Rockwell hardness• Cuts harder materials. The flatter point takes a smaller chip. More torque is

directed to a smaller area. This allows drilling into materials with hardness of more than 30 on the Rockwell “C” scale

• Stops drill walking. The split point design gives accurate starting without the use of a center punch

• Holds tighter hole size. The split point design is self-centering. This limits the normal oversize drilling characteristics

• Outstanding quality appearance. The rich amber gold color sets it apart from commodity cutting tools

• Runs cooler, uses less torque• 135° point takes a smaller chip resulting in less heat. Friction is reduced by

amber gold surface treatment• Stops chuck slippage. Flats on drill shanks allow easy positive chuck grip

ShopPro® VS. COBALTShopPro® drills will substantially outperform cobalt drills in work hardening stainless steel applications. This performance advantage is the result of construction differences between the two types of drills. Cobalt drills, manufactured to Type J NAS 907 specs, have a very thick web. This web is necessary to limit breakage of the brittle cobalt steel. ShopPro® drills are made of special hi-moly tool steel, which is much tougher than cobalt steel. The web on a ShopPro® drill can be thinned considerably due to the toughness of the steel. A ShopPro® drill with its thin web will penetrate the work hardening stainless fast enough to continually cut beneath the chip which is hardening from deformation. This means the drill is cutting softer steel. The cobalt drill, with its thick web, cannot be fed at a fast enough rate to cut beneath the area which is hardening. As a result the cobalt drill is continually drilling into hardened steel.

STAINLESS STEEL WORK HARDENING VS. FREE MACHININGWork hardening grades of stainless are the 300 series with the exception of 303, which is free machining. Free machining grades include the 400 series in addition to type 303. A quick way to identify work hardening versus free machining stainless is to observe the chip formation. Work hardening chips break up during the drilling process, while free machining chips are long and stringy.

COBALT APPLICATIONSCobalt drills are recommended for free machining stainless (400 series and 303), titanium alloys and other high tensile strength materials. These applications require the high red hardness of cobalt steel to counter the substantial heat generated in the drilling process.

ShopPro® VS. COBALTA ShopPro® drill with its thin web will penetrate the work hardening stainless fast enough to continually cut beneath the chip which is hardening from deformation. This means the drill is cutting softer steel. The cobalt drill, with its thick web, cannot be fed at a fast enough rate to cut beneath the area which is hardening. As a result the cobalt drill is continually drilling into hardened steel.

23WINZER.COM22

ShopPro® MECHANIC BITS

661.04.316 - ShopPro® Mechanic Drill Bits


DescriptionDrilling through a Grade 8 Bolt with Winzer’s ShopPro® Drill Bits


TO CUSTOMER

Materials • ShopPro® Drill Bit (661.04.316)• Grade 8 Hex Head Cap Screw (077.38.3)• Customer’s vise• 3/8” electric drill

Procedure for Drill Press1. Clamp down 3/8” bolt in vise2. Chuck 3/16” ShopPro® in electric drill3. Make sure drill bit is correctly in chuck and drill is in forward, not reverse.4. Check to make sure that there is no wobble in the drill when the drill motor

is running5. Place drill bit on the side of the Grade 8 bolt and begin drilling at low RPM

until drill bit gets a full bite6. Make sure to use enough downward pressure to prevent walking7. Once drill has successfully made initial pilot hole, increase RPM’s to about

3/4 of the maximum operating speed8. Drill completely through the bolt but be cautious not to break the bit when it

drills through the other side9. Once through the bolt use the bit to saw the bolt in half. Remember to move

drill up and down to prevent bit getting too hot in one place

What does this demo show?How quickly our drill bit will drill through a Grade 8 bolt. Also demonstrates the strength of our bits; that they can cut a bolt in half.

DANGER: Drill bit and bolt will be very hot after this demonstration. Do not touch for several minutes.


23WINZER.COM22

WINZER ShopPro® TAPSIdeal For• MRO• Machinist• Construction• Metal fabrication• OEM• Fastener

Applications• Repairing stripped out threads• Creating new threads• Can be used on many different varieties of metal including: aluminum, steel,

stainless steel, bronze, brass, cast iron and zinc

Features• Made in USA to Winzer’s rigid specifications• Special hi-tungsten/hi-molybdenum alloy construction• Ferro-gold surface treatment for maximum lubricity and smooth cutting• 4 flute design• Available in tri-sets containing 1 each taper, plug and bottom• Individually packaged• Heat-treated and stress relieved for longer tool life• Precision ground threads for superior accuracy and performance• Superior performance in tough-to-thread material, including stainless steel

BenefitsShopPro® taps are high-speed steel, ground thread, premium hand taps with a gold oxide coating. These taps can be used in both through or blind holes and are suitable for tapping most materials.

Compares toThere are many other companies that distribute taps, though very few of them offer a tap that is as high in quality as the ShopPro®.

SHOPPRO® TAPS661.21 - ShopPro® Plug Tap

661.22 - ShopPro® Taper Tap661.20 - ShopPro® Bottoming Tap


DescriptionShopPro® taps are high-speed steel, ground thread, premium hand taps with a gold oxide coating. These taps can be used in both through or blind holes, and are suitable for tapping most materials.


TO CUSTOMER

Materials • Tap handle• 3/8” Drill• 1/4” (20) ShopPro® HSS Plug Tap - (661.21.1420)• Anchor Lube - (891.7280)• #7 ShopPro® Drill Bit - (661.03.7.0)• 1/8” Mild Steel Plate - (979.8905)

Procedure1. Drill two holes through 1/8” steel plate using the #7 drill bit2. Attach 1/4”-20 carbon plug tap to tap handle and make sure it is

tightened properly3. Begin tapping hole with carbon tap. After just a few turns it will feel like if

you keep turning the tap will break. Show this to customer, then back out of the hole.

4. Add anchor lube to tap threads and continue tapping the hole.5. Attach ShopPro® tap to die handle and begin tapping the second hole

without lubricant.6. ShopPro® tap will cut through steel plate without the need of cutting fluid.

What does this demo show?This demo will show that because Winzer’s ShopPro® Taps are gold oxidated and treated for maximum lubricity; they are able to tap a hole in 1/8” steel easily and without the need of cutting fluid. The demo will also show how easily a hole is threaded when using the Anchor Lube on either the carbon tap or the ShopPro® Tap.



25WINZER.COM24

WOLVERINE DRILL BITSIdeal For• MRO• Construction• Automotive• Marine• OEM

• HVAC• Electrical• Plumbing• Fleet

Applications• Mild steel• Stainless steel• Aluminum

• Malleable steel• Truck/trailer frames

Features• Wolverine drill bits have a heavy-duty web construction that promotes quick

penetration at the point, longer cutting life and provides greater strength and rigidity which improves hole tolerances, resists deflection, permits higher feed rates and gives greater breakage resistance.

• Wolverine drill bits are packaged in custom envelopes that are available to Winzer franchises only.

• Wolverine drill bits are manufactured from a Premium Grade of M-2N Molybdenum High Speed Steel, and have a black and bronze surface, treated for maximum lubricity.

Benefits• Wolverine drill bits are distributed exclusively through Winzer Corporation

that feature extremely high performance and world class quality.• Wolverine’s unique 140° split point allows the bit to drill longer in harder

materials and its 3 flats on the shank prevent slipping in the chuck. The 140° split point’s main advantage is the large reduction in high end thrust and positive rake cutting edge extending to the center of the drill, which makes the drill generate less heat, therefore lasting longer.

Compares toThere are many other companies that distribute drill bits, though only Winzer carries the Wolverine drill bit line.

WOLVERINE DRILL BITS661.84.001 - Wolverine Drill Demo Kit


DescriptionWinzer is the exclusive distributor of Wolverine. Wolverine drill bits are true professional grade made for applications where a commodity type drill bit just won’t cut it. Once customers try Wolverine drill bits, they will never want to use anything else and with Wolverine’s premium quality and superb performance, you can sell with confidence.


TO CUSTOMER

Materials • Wolverine Drill Demo Kit- (661.84.001) • 3/16” Wolverine Drill Bit• 3” x 5” Plate of 304 stainless steel

Procedure for Drill Press1. Clamp stainless plate into vise.2. Chuck a 3/16” bit into hand drill and count number of holes it will drill.3. Next, chuck the Wolverine into drill and repeat the process.

Procedure for Portable Drill1. Clamp stainless plate to drill press.2. Chuck a 3/16” bit into hand drill and count number of holes it will drill.3. Next chuck the Wolverine into drill and repeat the process.

What does this demo show?This demo will show that Wolverine drill bits will drill holes without burning out unlike most of its competitors, in even the toughest materials.

Note: For best results, slow your drill speed when drilling in harder materials such as stainless steels. Also, when using the Wolverine drill bits in hand helds drills it may be necessary to apply a little more pressure than normal to start holes. The reason for this is the 140° split point, which is also what makes it so great for drilling harder materials like stainless steel.



25WINZER.COM24

220 MS MILD STEELIdeal For• Agriculture• Aircraft• Automotive• Bakeries• Bottling• Breweries• Chemical

• Dairies• Energy/power plants• Farming• Food processing• Hospitals/medical• Industrial• Manufacturing

• Marine• Mining/quarries• Public utilities• Pulp/paper• Railroads• Steel mills

Applications• Angle iron• Beams• Brackets• Cabinets• Door frames

• Expanded metal• Furniture• Galvanized metal• Mild steel• Pipe/fittings

• Plate• Tanks• Truck bodies• Tubing• Window frames

Features• 220MS has an exceptionally stable arc, even with an AC “Buzz Box”

welding machine• 220MS is an all position rod. Great for flat, vertical up and vertical down. This i

Is great when you are at an odd angle or can’t bring the item needing repair back to the convenience of the shop. Since the rod can be bent without losing the flux, it is a great tool to use in hard-to-reach places. 220MS will even do a great job of welding overhead. It will not fall out

• 220MS is great on sheet metal, with no sticking and excellent restrike ability• 220MS can also repair weld items made of galvanized steel easily. Very little

smoke compared to normal electrodes. The galvanized can be dirty, even greasy; 220MS will weld right through it. It saves a ton of prep time, as you can go right to work instead of having to scrape, chip, brush and grind

Benefits• 220MS’s tensile strength is much higher than the 60 series rod that it replaces. Normal 60 series rods are 60,000 psi and only 13% elongation. Our 25% elongation means that the extra strength doesn’t make it brittle, so repairs are durable.This one rod can replace many others. For example: it can replace 6010, 6011, 6013 common maintenance electrodes.

* Remember that 220MS cannot replace a rod that is specified in. These rods are for maintenance repair applications• 220MS runs with very low spatter so it is safer• These rods meet or exceed the AWS/ASME specifications for 60 series electrodes

686.611.18.10 - 220MS - 1/8”


Materials • 220MS – 1/8” - part number (686.611.18.10)• AC or DC welding machine (Recommendation: using DC Reverse(+)

current is best)• 8” piece of mild steel and a similar size of galvanized• MSDS sheet for your customer in case they need it, otherwise they are

sent with each shipment• Pliers• Chipping hammer with brush• Welding coveralls to protect your clothing• Wear a full face welding mask to protect your eyes, and make sure the

customer wears one too. Do not watch the welding arc with unprotected eyes, it will damage your vision

• A product specification sheet in case the customer requests one

Procedure1. Set welding machine on DC Reverse(+) and correct amperage for

rod diameter.2. Make sure grounds and clamps are set so effective and safe.3. Run a test bead for the customer verifying the machine is set properly. 4. Make sure to point out the low level of spatter or no spatter at all.5. Chip off the slag after the weld cools and show the customer how good

the weld looks. Note how well the bond line looks and how well the 220MS ties into the material. On thinner material, flip it over and show the customer how well the weld penetrates the material.

6. Have the customer weld with the 220MS themselves. Have every welder try it on both mild steel and galvanized steel. Put some anti-seize on either metal and have them weld through it. Be careful not to use any materials that would explode. Stick to the demo.

7. Tell the customer to keep the electrode resting on the metal once he has started to arc. Keep the electrode at a 45° angle to the surface of the metal.

8. This is a good time to mention how easy it is to use the product as they weld. Have them try to weld in all different positions. As well as how it doesn’t roll out of where it was welded.

9. After the weld cools, show them how easily the slag knocks off with the chipping hammer, revealing the perfect weld underneath.

10. Be sure to mention that 220MS comes in MIG and TIG rods.

CloseAsk which diameters they use and what type of machine they use it on. Quote them on every style they use, electrode, MIG and TIG. Many customers use all 3 in the same shop, depending on the application. Make sure to have prewritten the order. Show the customer how the standard packaging comes. Try to have shown the other electrodes in the industrial assortment, so that you can close on the assortment that contains them all. Always sell assortments with a cabinet. First sell the normal assortments, then do custom it assortments with a bin. Just add $85 to the cost of all the individual items totaled up to get the cost of the custom kit. This must be done to create a check stock situation where you can resell each month. Without a cabinet, the customer cannot know whether they need to be restocked.

Recommended pricing is 60% to 75%, depending on your customer. If just opening the account, 70% pricing is recommended if you have to package it individually and not sell it in the assortment. Start with 20 lbs of 220MS if selling it by itself outside of an assortment. Price this at 60% to 70% at this volume. It is recommended to raise margin as you lower poundage. Be at least 70% if selling in the 10 lb packaging.

27WINZER.COM26

1116LH LOW HYDROGENIdeal For• Agriculture• Aircraft• Automotive• Bakeries• Bottling• Breweries

• Chemical • Dairies• Energy/power plants• Farming• Food processing

• Hospitals/medical• Industrial• Manufacturing • Marine• Mining/quarries• Public utilities

• Pulp/paper• Railroads• Steel mills

Applications• Angle iron• Beams• Brackets• Boilers• Bridges

• Carbon steel• Farm equipment• Mild steel• Pipe• Plate

• Shafts• Structural steel• Tanks• Truck bodies• T-1 steel

• CARC paint for military ground vehicles

Technical Data• Tensile Strength: 120,000 psi• Yield Strength: 96,000 psi• Elongation: 23%• Current: DC Reverse(+) only• Recommended Amperage: 5/32” = 140/190, 1/8” = 100/140• AWS/ASME: SFA E 11018-M BS 2493 2NiMo.BH• DIN: 8529 EY 6965 Mn2NiCrMoB

Features• 1116LH has an extra low moisture content that is below 0.14% to reduce

hydrogen induced cracking in the weld• 1116LH is an all position rod. Great for flat, vertical up and vertical down.

This is great when you are at an odd angle or bring the item needing repair back to the convenience of the shop. 1116LH will perform welding overhead. It will not fall out

• 1116LH has the ability to weld right through its own slag easily, saving time by not having to remove slag as you weld over the top of it to build up the weld

• 1116LH has very little smoke compared to normal electrodes. The steel can be dirty, even greasy, and 1116LH will weld right through it. It saves valuable prep time, as you can go directly to work instead of having to scrape, chip, brush and grind

Benefits• 1116LH tensile strength is much higher than the 70 series rod that it

replaces. Normal 70 series rod is only 70,000 psi and only 13% elongation. Our 23% elongation means that the extra strength doesn’t make it brittle so repairs are durable. This one rod can replace many others. For example, it can replace 7014, 7018, 7024 common maintenance electrodes for when you need more strength in your weld repair. *Remember that 1116LH cannot replace a rod that is specified in. These rods are for maintenance repair applications

• 1116LH runs with very low spatter so it is safer. 1116LH is easy to re-strike and has self-releasing slag

• These rods meet or exceed the AWS specifications for 70 series electrodes

686.610.18.10 - 1116LH LOW HYDROGEN


Materials • 1116LH – 1/8” - part number (686.610.18.10)• DC welding machine on reverse polarity only• 8” piece of angle iron• MSDS sheet for your customer in case they need it. Otherwise they are

sent with each shipment• Pliers• Chipping hammer with brush• Welding coveralls to protect your clothing• Do not watch the welding arc with unprotected eyes, it will damage

your vision• Have a product specification sheet in case the customer wants a copy

Procedure1. Set welding machine on DC reverse polarity and correct amperage for

rod diameter2. Make sure ground clamp is set, so it’s effective and safe3. Run a test bead for the customer, verifying the machine is set properly4. Make sure to point out the low level of spatter or no spatter at all5. Chip off the slag after the weld cools and show the customer how good the

weld looks. Note how well the bond line looks and how well the 1116LH ties into the material. On thinner material, flip it over and show the customer how well the weld penetrates the material

6. Have the customer weld with the 1116LH themselves. Have every welder try it. Tell the customer to weld a 6” bead, then turn around without breaking the arc, then weld right back over the first weld with a wider bead. Let it cool and knock the slag off. Point out the perfect weld and no pin holes (porosity)

7. Make sure to point out how easily it is to use the product as they weld. Have them try to weld in all different positions. Point out how it doesn’t roll out of where it was welded

8. After the welding is done, have them take a chop saw or band saw and cut right through the weld so they can see it is fully machinable.This is very important. Point how good the weld is all the way through. There should be no slag inclusions

9. Make sure to mention that 1116LH comes in MIG and TIG also. Ask which diameters they use and what type of machine they use it on. Quote them on every style they use, electrode, MIG and TIG. Many customers use all 3 in the same shop, depending on the application

CloseMake sure to have prewritten the order. Show the customer how the standard packaging comes. Try to have shown the other electrodes in the industrial assortment so that you can close on the assortment that contains them all. Make sure to sell a custom assortment if that does not work. Just add $70 to the total of all the individuals added up and quote this new total to the customer. Tell them all the items the total will include and that the cabinet to organize it also comes. This will create a checkstock situation that you both will like. Recommended pricing is 60% to 75%, depending on your customer. If just opening the account, 70% pricing is recommended if you have to package it by itself and not sell it in the assortment. Start with 20 lbs of 1116LH if selling it by itself outside of an assortment. Price this at 60% to 70% at this volume. It is recommended to raise margin as you lower poundage. Be at least 70% if selling in the 10 lb packaging.

27WINZER.COM26

STAR SHIELD HEAT BARRIERIdeal For• Agriculture• Aircraft• Automotive• Bakeries• Bottling• Breweries

• Chemical • Dairies• Energy/power

plants• Farming• Food processing

• Hospitals/medical• Industrial• Manufacturing • Marine• Mining/quarries• Public utilities

• Pulp/paper• Railroads• Steel mills• Transportation

Technical Data• Asbestos-free• Does not contain any toxic elements

Features• Star Shield can be rehydrated with water and reused indefinitely.

Very economical• Star Shield will absorb up to 3000° F• Maintains its shape when heated so it can hold things in place

Benefits• Protects valuable parts from being affected by the heat generated during

repair efforts. Gaskets are a prime example of what can be affected by heat if the repair of nearby parts is not contained.

• Star Shield makes repairs safer as well. Heat is controlled where you expect it and you are less likelto get burnt or hurt

• Star Shield only has to be applied to one side. This helps a lot as many repairs, done in place, only allow this. You still get the full insulation with just one side covered 686.6.2 - Star Shield Heat Barrier


DescriptionWinzer Star Shield Heat-Resistant Compound is asbestos free, easy to mold, dual-purpose material used for insulating and positioning parts for welding, soldering or brazing. Star Shield shapes like putty and will not burn, crack, melt, swell or interrupt alignment. In addition to its uses as a “temporary vise”, Star Shield protects plastics, rubber, glass and paint from the effects of heat and withstands temperatures to 3,000˚F. Star Shield also reduces distortion when welding light gauge such as stainless steel.

Materials • Star Shield Heat Barrier – (686.6.2)• A piece of stainless steel is best by far, Carbon steel is ok. Metal should be

about 3” wide x 1/4” thick x 12” long• Oxy/acetylene torch• Welding gloves• Cup of cold water

Procedure1. Put the Star Shield Heat Barrier on just one side of the stainless steel. Make

sure that you have the Star Shield all the way across the width.2. Hold onto one end of the stainless steel, the end opposite the side you will

heat up. Be very careful not to touch the hot side.3. Heat the side opposite your hand to a red hot temperature. Then turn

the torch off and dump cold water on both sides of the Star Shield so the customer can see the torched side steam and the other be cool.

CloseMake sure to have prewritten the order. Show the customer how the standard packaging comes. Can sell this as an add on to welding orders at $55 to $75.


product starter kit · 2021. 1. 11. · clean cut foamy cutting oil 891.7292 - 15.25 oz product...

Documents