product_catalog_q1_2011
TRANSCRIPT
-
8/7/2019 Product_Catalog_Q1_2011
1/27
-
8/7/2019 Product_Catalog_Q1_2011
2/27
Telephone: 435-750
Sales@ControlByWe
Introduction
ControlByWeb products are high-end components for remote monitoring and control applications. Companies, organizations, and individuals use
our products to monitor and control many different types of equipment and systems in real-time from any computer using a web browser. Our
products can be used as stand-alone devices in simple applications, offering a complete solution requiring no additional equipment. They can
also be used as building-blocks in large systems.
How They Work
Each ControlByWeb product has a small combination of I/O (inputs & outputs) and a built-in web server. Sensors, switches, voltages, etc., can b
connected to the inputs for monitoring various parameters, conditions, or events of interest such as temperatures, voltages, or alarms. Output
(usually relays) can be used to control just about anything, including lights, bells, motors, computers, heating systems, etc. Because our produc
have a built-in web server, users can view input parameters and control relay outputs using a simple web page from just about any web browser
In addition, our products support multiple protocols so they can communicate directly with computers, PLCs, and automation controllers in more
advanced control systems.
Example Applications
ControlByWeb products are used to monitor temperature, humidity, power, tank levels, pressure, the status of doors, windows, production
machines, and much more. Our products are also used to control computers (remote reboot), communications equipment, lights, bells, motors,
pumps, HVAC units, signs, gates, and much more.
Why ControlByWeb
ControlByWeb products are designed to be extremely robust and reliable. Although they are affordably priced, no shortcuts were taken in their
design, and no compromises were made in the parts used. Some would say that our products are over engineered because there are many
internal parts that could be replaced with less expensive versions or even removed to save money, but we believe its more important to build th
right than to build them cheap. Our products are carefully made in the USA at our own facilities and each product is inspected many times at
different levels of production and tested before it is shipped. Our firmware is tested both manually and automatically for long time periods to
verify its integrity before it is released. Our staff is very knowledgeable and we are interested in doing whatever we can to make sure all projec
that use our products are successful. These are just a few reasons to choose ControlByWeb.
-
8/7/2019 Product_Catalog_Q1_2011
3/27
Contents
Telephone: 435-750
Sales@ControlByWe
X-300 | Web-enabled Thermostat/ Temperature Monitor . . . . . . . . . . . . . . 1
X-301 | WebRelay-Dual Series III . . . . . . . . . . . . . . . . . . . . . . 3
WebRelay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
WebRelay-Quad . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
WebRelay-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
WebRelay-10 Plus . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Five-Input Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Temperature Module . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Analog Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
WebSwitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
WebSwitch Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Feature Comparison Chart . . . . . . . . . . . . . . . . . . . . . . . . 23
Trademark and Copyright InformationWarranty
-
8/7/2019 Product_Catalog_Q1_2011
4/27
Telephone: 435-75
Sales@ControlByW
- 1 -
X-300Three Relays, 1-8 Temperature/Humidity Sensors7-Day Programmable Web-Enabled Thermostat
he X-300 is two products in one package.
rst, the X-300 is a powerful web-based temperature logging instrument that allows
ou to monitor temperatures via an IP network. Up to eight temperature/humidity
ensors can be connected at a time, and temperature/humidity can be viewed in
eal-time using a web browser. It has three relays that can be used for control of
ans, heaters, coolers, or just about anything. Relay control can be based upon
emperature or can be independent. In addition, the X-300 has many advanced
eatures including email alerts, relay control, a BASIC interpreter, and much more.
econd, the X-300 is a 7-day programmable web-enabled thermostat. Users can
djust and set temperatures for heating and cooling systems and view current indoor
nd outdoor temperatures from any web browser. As a web-enabled thermostat, itrovides an attractive control web page that works great on desktop computers as
ell as most web-enabled smartphones.
Features :
Web-browser based - no software required. Self contained - no external server or services required.
Email alerts.
Three, 3-Amp relays.
Built-In real-time clock w/ capacitor backup.
Temperature Logger.
Supports HTTP, TCP, SNMP, Modbus/TCP.
Supports additional data logging and management from web services.
Internal temperature and voltage monitoring for diagnostics.
Wide operating temperature range.
Removable terminal connector for convenient wiring.
Field updatable.
Rugged DIN-Rail/wall mountable enclosure.
Web-Enabled Temperature/Humidity Logger:
The temperature logger can receive data from up to eight
sensors (one temperature sensor included).
Both temperature and humidity sensors are supported.
Supports BASIC scripts for advanced configuration.
Web Enabled Thermostat:
Attractive thermostat user interface.
Connect up to two temperature sensors (indoor and outdoor).
7-day programming schedule. Connect to single stage heating/cooling system.
7-Day Programmable Schedule Control Page User Interface
-
8/7/2019 Product_Catalog_Q1_2011
5/27
HeatCoolFan
1NO1C
1NC2NO2C
2NC3NO3C3NC
VIn+VIn-VoutGndData
X-300
Ethernet
ACTLINK
R2R1R3
Power
ThermostatThermometerAlarm/Logger
WebEnabled
daqseriesdata acquisition3
Telephone: 435-750
Sales@ControlByWe
-2-
Power Requirements:
Model: X-300-I
Voltage: 9-28VDC
Current: 44mA - 374mA*
*Current based upon voltage applied and device settings.
See users manual for complete breakdown.
Model: X-300-E
Power Over Ethernet Option: POE Class 1
0.44 to 3.84 Watts)
/O: 3 Relays, Up To 8 Temperature/Humidity Sensors
Relay Contacts:
Max Voltage: 28VAC, 24VDC
Max Current: 3A
Network:
0/100 Base-T Ethernet Port
Network Setup:
Static IP address assignment or DHCP, HTTP port
selectable
Digital Temperature Sensors:
-Wire Dallas Semiconductor DS18B20
Temperature Range: -55C to +125C
Accuracy: 0.5C (from -10C to +85C)
Digital Humidity Sensors (optional):
Humidity Range: 0-100%
Accuracy: 1.8%
Temperature Sensor Functions:
Sensor Functions: Thermometer, Thermostat,
Relay Control, Remote Relay Control, Email Alarms,
SNMP Traps, Temperature Logging
Real-Time Clock:
Manual or NTP (Network Time Protocol) setup
NTP Sync Period: Once, Daily, Weekly, On Power-up
Automatic Daylight Savings Adjustment
Battery (capacitor) Power Backup
Capacitor Power Backup:
Backup Functions: Retain Real-Time Clock, External
Variables, Outlet State
Backup Duration: 3 days minimum
Connectors:
Power/Inputs: 14-position, removable terminal strip,
3.81mm terminal spacingNetwork: 8-pin RJ-45
LED Indicators: 6
-Module Powered
-Relay Coil Energized (1-3)-Network Linked
-Network Activity
Operating Modes:
Temperature Monitor
Thermostat
Physical:
Operating Temperature: -40C to 65C (-40F to 149F)
Size:
1.41in (35.7mm) wide
3.88in (98.5mm) tall
3.1in (78mm) deep (not including connector)
Weight: 5oz (142 grams)
Enclosure Material: Lexan 940,Flame rating UL94 V0
Monitor/Control:
Web Browser, XML, Modbus/TCP, SNMP, Remote Serv
Remote Monitoring and Data Logging
Logging:
Storage: Nonvolatile Flash
Buffer Architecture: Circular Buffer
Log file size: 512K (max 11,049 logs)
Unlimited data storage from Web Monitoring S
Advanced Features:
BASIC interpreter
Remote services
Avoid most firewall issues with outbound conn
to Web Services
Password Settings:
Password protection on setup page: Yes
Password protection on control page: Optiona
Password Encoding: Base 64
Max password length: 13 characters
Additional Applications:
P
P
P
P
PP
P
P
Server Rooms
Freezers
Green Houses
Vacation Homes
More...
Refrigiration SystemsApartment Complexes
Car Washes
Temperature Sensor
HVAC System
Web-Enabled Thermostat
Remote Temperature Monitoring/Logging
HeatCoolFan
1NO1C
1NC2NO2C2NC3NO3C3NC
VIn+VIn-VoutGndData
X-300
Ethernet
ACTLINK
R2R1R3
Power
Thermostat Thermometer Alarm/Logger
W
ebEnabled
daq seriesdata acquisition TM3
Server Rack
Cooling Fan
Temperature Sensor
X-300
-
8/7/2019 Product_Catalog_Q1_2011
6/27
Features :
Up to 100 scheduled events. Full calender scheduling.
Automatic daylight savings and leap year adjustment.
Synchronize clock with NTP server for precise time keeping.
Capacitor-backed clock.
Two electro-mechanical relays.
Two optically-isolated inputs.
Automatic and manual control.
Control and configure using a web browser.
No software required.
Customizable web-based control page.
Settings stored in non-volatile memory.
BASIC script support for advanced functionality.
Remote services; X-301 can be configured to initiate connection to a
remote server.
HTTP, SNMP, SMTP, Modbus/TCP, DHCP.
Email alerts.
Event and periodic logging.
System voltage and internal temperature monitoring.
Removable 14-pin terminal connector for easy installation.
Rugged DIN-Rail/wall mountable enclosure.
X-301WebRelay-Dual
Two Optically Isolated Inputs, Two Relays100 Individual Event Scheduler
he series III WebRelay-Dual (X-301) is an exciting component in our most advanced
eries of products.
is a robust, full-featured, web-enabled, mini Ethernet I/O module with two 5-Amp
elays and two optically-isolated digital inputs. It has non-volatile memory for logging, a
eal-time clock with support for NTP (time server) synchronization and an advanced
ull-calender scheduler which can be used to turn on/off relays at preset times. Its
eb-based user interface means it can be used right out of the box with no programming
equired.
he series III WebRelay-Dual has many advanced features including a simple firewall,
he ability to initiate a connection to remote servers, BASIC programming, SNMP, email
erts, peer-to-peer communications, internal monitoring, and more.
he series III WebRelay-Dual is ideal for many applications, including security, remote
ontrol, street sign controllers, shift bell controllers, and much more.
Event Scheduling Page Relay Options Page
Telephone: 435-750
Sales@ControlByWe
-3-
-
8/7/2019 Product_Catalog_Q1_2011
7/27
Telephone: 435-750
Sales@ControlByWe
-4-
Power Requirements:
Model: X-301-I and X-301-24I
Voltage: 9-28VDC
Current: 44mA - 324mA*
*Current based upon voltage applied and device settings.
See users manual for complete breakdown.
/O: 2 Relays, 2 Inputs
Relay Contacts:
Max Voltage: 28VAC, 24VDC
Max Current: 5A
Optically Isolated Inputs:
Voltage Range: (Standard Model)
VHigh: 3-12VDC
VLow: 0-1VDC
Voltage Range: (24-I model):
VHigh: 11-28VDC
VLow: 0-1VDC
Current: 4.7-25mAMinimum Hold Time (high or low): 20ms
Maximum Count Frequency: 25Hz
nput Functions: Monitor State, Control Relays, Control
Remote Relays, Count, High Timer
Real-Time Clock:
Manual or NTP (Network Time Protocol) setup
NTP Sync Period: Once, Daily, Weekly, On Power-up
Automatic Daylight Savings Adjustment
Battery (capacitor) Power Backup
Capacitor Power Backup:
Backup Functions: Retain Real-Time Clock, External
Variables, Outlet State
Backup Duration: 3 days minimum
Network:
10/100 Base-T Ethernet Port
Network Setup:
Static IP address assignment or DHCP, HTTP port
selectable
Connectors:
Power/Inputs: 14-position, removable terminal strip,
3.81mm terminal spacing
Network: 8-pin RJ-45
LED Indicators: 7
-Module Powered
-Relay Coil Energized (1-2)
-Inputs (1-2)
-Network Linked-Network Activity
Physical:
Operating Temperature: -40C to 65C (-40F to 149F)
Size:
1.41in (35.7mm) wide
3.88in (98.5mm) tall
3.1in (78mm) deep (not including connector)
Weight: 5oz (142 grams)
Enclosure Material: Lexan 940
Flame rating UL94 V0
Monitor/Control:
Web Browser, XML, Modbus/TCP, SNMP, Remote
Services and Data Logging
Logging:
Storage: Nonvolatile Flash
Buffer Architecture: Circular Buffer
Log file size: 200K (max 11123 logs)
Unlimited data storage from Web Monitoring Servi
Advanced Features:
BASIC interpreter
Remote servicesAvoid most firewall issues with outbound connecti
to Web Services
Password Settings:
Password protection on setup page: Yes
Password protection on control page: Optional
Password Encoding: Base 64
Max password length: 13 characters
Additional Applications:
P
P
P
P
PP
P
Traffic Warning Light Controller
Electric Door Lock Control
Timed Control of Electrical Outlets
Vacant Home/Building Monitor
Event CounterExtend I/O from a PLC to Another Building
More...
Shift Change Bell Controller
Remote Security Gate Control
Input 1
Input 2
Relay1
Relay 2
Power
ACT
LINK
Vin+
Vin-
Vout
Gnd
In1+
In1-
In2+
In2-
1C1NC
1NO
2C
2NC
2NO
RelayWEBTM
Dual-III
2 Inputs
2 Relays
RTC+
NVmem
Input 1
Input 2
Relay1
Relay2
Power
ACT
LINK
Vin+
Vin-
Vout
Gnd
In1+
In1-
In2+
In2-
1C
1NC
1NO
2C
2NC
2NO
RelayWEBTM
Dual-III
2 Inputs2 RelaysRTC+NVmem
Input 1
Input 2
Relay1
Relay2
Power
ACT
LINK
Vin+
Vin-
Vout
Gnd
In1+
In1-
In2+
In2-
1C
1NC
1NO
2C
2NC
2NO
RelayWEBTM
Dual-III
2 Inputs2 RelaysRTC+NVmem
Schedule Bell
Gate Controller Push Button
IP Network
Security Gate
Event Schedule
X-301 WebRelay-Dual Series III
-
8/7/2019 Product_Catalog_Q1_2011
8/27
Features :
No programming required. Full control using a standard web browser or text-based XML messages.
Can operate as a Modbus/TCP slave.
Password protected.
12-Amp relay contacts.
On/Off and Pulse modes.
Optically isolated input can be used for:
Monitoring
Relay control
Remote relay control (Peer to Peer)
Automatic Reboot controller mode for remote reboot of computers and
network devices.
Selectable TCP ports.
Two removable terminal connectors included.
Rugged DIN-Rail/wall mountable enclosure.
Three power supply options available:
5 VDC
9-28 VDC
Power-Over-Ethernet (802.3af)
WebRelay One Optically Isolated Input, One Relay,Manual/Automatic Reboot Modes
ebRelay provides reliable remote relay control and discrete signal monitoring over
ny IP network. WebRelay can be used in countless applications, including pump and
otor control, security lock systems, remote reboot, and lighting control. WebRelay's
owerful and flexible design make imagination its only limit.
addition to its built-in relay, WebRelay has an optically isolated input that can be
sed to monitor the state of devices, control the relay, or control a remote relay
omewhere else on the network. This feature is useful to extend the output of a PLC to
nother building or to allow a switch or sensor to control a device at a distant location.
Telephone: 435-750
Sales@ControlByWe
-5-
Drop-down List for Controlling Remote Relays Automatic Reboot Options
-
8/7/2019 Product_Catalog_Q1_2011
9/27
Telephone: 435-750
Sales@ControlByWe
-6-
Power Requirements:
Model X-WR-1R12-1I5-5
Voltage: 5VDC 5%
Current: 166mA - 465mA*
Model X-WR-1R12-1I5-I and X-WR-1R12-1I24-I
Voltage: 9-28VDC
Current: 38mA - 313mA*
*Current based upon voltage applied and device settings.
See users manual for complete breakdown.
Model X-WR-1R12-1I5-E
Power Over Ethernet Option: POE Class 1
0.44 to 3.84 Watts)
/O: 1 Optically Isolated Input, 1 Relay Output
Relay Contacts:Contact Form: SPDT (Form C)
Contact Material: AgSnO2
Max Voltage: 240VAC, 100VDC
Max Current: 12A
Relay Control Options: ON/OFF or Pulsed
Pulse Timer Duration: 100ms to 86400 Seconds (1 day)
Accuracy of pulse timer: 99.99%
Optically Isolated Input:
Input Voltage: (5V Input models)
VHigh: 3-12VDC
VLow: 0-1VDCInput Current: 4.7mA 25mA (5V Input models)
Input Voltage: (24V Input models)
VHigh: 11-28VDC
VLow: 0-1VDC
Input Current: 4.9mA 13.4mA (24V Input models)
Input Isolation: 1500V
Input Functions: Monitor, Local Relay Control, Remote Relay
Control
Input to Local Relay Settings: Equal, Invert, Toggle, Latch,
Pulse, none
Input to Remote Relay Settings: Equal, Invert, Toggle, Latch,
Pulse, None
Network:
10/100 Base-T Ethernet
Network Setup:
Static IP address assignment, HTTP port selectable
Connectors:
Power/Input: 5-position, removable terminal strip,
3.81mm terminal spacing
Relay: 3-position, removable terminal strip.
7.62mm terminal spacing
Network: 8-pin RJ-45 socket
LED Indicators: 4
-Input
-Relay Coil Energized
-Network Linked-Network Activity
Physical:
Operating Temperature: -40C to 65C (-40F to 149
Size: 1.41in (35.7mm) wide
3.88in (98.5mm) tall
3.1 in (78.0mm) deep
Weight: 5oz (142 grams)
Enclosure Material: Lexan 940 (UL94 V0 flame rated
Password Settings:
Password protection on setup page: Yes
Password protection on control page: Optional
Password Encoding: Base 64
Max password length: 10 characters
Regulatory Compliance:
Electromagnetic Compliance:
IEC CISPR 22, CISPR 24
FCC 47CFR15 (-I and -5 Models class B, POE Model C
EU EN55024, EN55022
Product Safety:
IEC 60950-1 / EN 60950-1
Additional Applications:
P
P
P
P
PP
P
P
Remote Reboot
Pump Control
Motor Control
Remote Relay
More...
Remote PLC ControlHome Automation
Industrial Automation
Daisy Chained Control
IP Network
WebRelay
RelayWEBTM
ACT
LINK
INPUT
RELAY
Web-ControlledRelay
C
NO
NC
VIN +
VIN -
INPUT -
INPUT +
+5V OUT
Contacts
Computer/PLC Controller
Bell (Device to be Controlled)
IP Network IP Network
RelayWEBTM
ACT
LINK
INPUT
RELAY
Web-ControlledRelay
C
NO
NC
VIN +
VIN -
INPUT -
INPUT +
+5V OUT
Contacts
Bell (Device to be Controlled)
RelayWEBTM
ACT
LINK
INPUT
RELAY
Web-ControlledRelay
C
NO
NC
VIN +
VIN -
INPUT -
INPUT +
+5V OUT
Contacts
Bell (Device to be Controlled)
-
8/7/2019 Product_Catalog_Q1_2011
10/27
Features :
Built-in web server for setup and remote relay control from a web-browse No special software or device drivers required.
XML status and control pages makes communications with custom software
applications simple.
Can operate as Modbus/TCP slave device.
Four independent, 28 V, 1-Amp Relays (SPDT).
On/Off and Pulse modes.
Rugged DIN-Rail/wall mountable enclosure.
Includes a 14-pin industrial terminal connector.
Power Supply Options:
5 VDC
9-28 VDC
Power-Over-Ethernet (802.3af)
WebRelay-Quad Four Independant Relays
or many applications, WebRelay- Quad is the fastest, easiest, least expensive, and
ost reliable way to remotely control equipment over an IP network, including the
ternet.
ebRelay-Quad is used by many different companies for hundreds of applications
uch as industrial control, security, remote control, remote reset, and much more. It
as four low-signal relays that can individually switch up to 1-Amp at 28V. Each relay
an be turned on, off, or pulsed using the built-in web pages or by running custom
cripts from a computer or dedicated controller. It is extremely versatile and can be
ade to fit almost any remote relay control need.
he WebRelay-Quad is fully configured in minutes using a web browser. No
dditional software is needed.
Telephone: 435-750
Sales@ControlByWe
-7-
Individual Relay CustomizationControl User Interface
-
8/7/2019 Product_Catalog_Q1_2011
11/27
Telephone: 435-750
Sales@ControlByWe
-8-
Power Requirements:
Model: X-WR-4R1-5oltage: 5VDC5%
urrent: 173mA - 458mA*
Model: X-WR-4R1-I
oltage: 9-28VDC
urrent: 40mA - 320mA
Current based upon voltage applied and device settings.
See users manual for complete breakdown.
Model: X-WR-4R1-E
ower Over Ethernet: POE Class 1
0.44 to 3.84 Watt)
/O: 4 Relays
Relay Contacts:
ontact Form: SPDT (Form C) (Direct access to dry contacts)
ontact Material: Ag (Au clad)
Max Voltage: 28V
Max Current: 1A
Min Load: 1mA @ 5VDC
elay Control Options: ON/OFF or Pulsed
ulse Timer Duration: 100ms to 86400 Seconds (1 day)
ccuracy of pulse timer: 99.99%
Network:
10/100 Base-T Ethernet
Network Setup:
Static IP address assignment, HTTP port selectable
Connectors:
Power/Relay Contacts: 14-position, removable terminal strip,
3.81mm terminal spacing
Network: 8-pin RJ-45 socket
LED Indicators: 7
-Module Powered
-Relay Coil Energized (1-4)
-Network Linked
-Network Activity
Physical:
Operating Temperature: -40C to 65C (-40F to 149F)
Size:
1.41in (35.7mm) wide
3.88in (98.5mm) tall
3.1 in(78.0mm) deep
Weight: 4.5oz (128 grams)
Enclosure Material: Lexan 940 (UL94 V0 flame rated)
Password Settings:
Password protection on setup page: YesPassword protection on control page: Optional
Password Encoding: Base 64
Max password length: 10 characters
Regulatory Compliance:
Electromagnetic Compliance:
IEC CISPR 22, CISPR 24
FCC 47CFR15 (-I and -5 Models class B, POE Model C
EU EN55024, EN55022
Product Safety:
IEC 60950-1 / EN 60950-1
Additional Applications:
P
P
P
P
P
Industrial Control
Remote Reset
Security
Remote Control
More...
Four Color Light Tower
Use with Five-Input Module to Extend Dry Contacts to a Remote Location
Relay1Relay2
Relay3
Relay4
Power
ACT
LINK
Vin+
Vin-
1C
1NC
1NO
2C
2NC
2NO
RelayWEBTM
Quad-L
S
3C
3NC
3NO
4C4NC
4NOFourR
elay
Module
Light Tower
WebRelay-Quad
Input3
Input 4
Power
Input 1
Input 2
Input 5
ACT
LINK
Vin+
Vin-
+5
Gnd
In1+
In1-
In2+
In2-
In3+
In3-
In4+
In4-
In5+
In5-FiveInput
Module
seriesdata acquisition
Relay 1Relay 2
Relay3
Relay4
Power
ACT
LINK
Vin+
Vin-
1C
1NC
1NO
2C
2NC
2NO
RelayWEBTM
Quad-LS
3C
3NC
3NO
4C
4NC
4NOFourRelay
Module
Control Switches
Five-Input Module WebRelay-Quad
Input 1
Input 2
Input 3
Input 4
Output 1
Output 2
Output 3
Output 4
Location A Location B
-
8/7/2019 Product_Catalog_Q1_2011
12/27
Features :
Ten independent 30-Amp Relays (Form C, SPDT). Built-in web server for browser-based setup and control.
No special software or device drivers required.
XML status and control page make communications with custom computer
applications simple.
Can operate as a Modbus/TCP slave.
On/Off and Pulse modes.
Wide power supply range (10-36 VDC).
DIN-Rail mountable.
LEDs indicate the current relay state.
1/4 tab-connectors.
UL/CUL listed relays (E197852).
WebRelay-10 Ten Individual 30-Amp Relays
ebRelay-10 is a robust, industrial relay board with Ethernet communications. Itrovides remote relay control through its ten large 30-Amp relays. The relays can
e individually controlled using a standard web browser or by sending commands
rom a custom control application. It is self-contained with a built-in web server, and
equires no external software, additional network modules, or computers.
ebRelay-10 is designed for industrial applications and can be DIN-Rail mounted
side a control cabinet. Tab connectors (1/4 inch) are used for power and relay
ontact connection.
Telephone: 435-750
Sales@ControlByWe
-9-
Relay Setup Page WebRelay-10 Control Page
-
8/7/2019 Product_Catalog_Q1_2011
13/27
Telephone: 435-750
Sales@ControlByWe
-10-
Power Requirements:
Model: X-WR-10R12-I
Voltage: 10-36VDC
Current: 53mA - 1.2A*
*Current based upon voltage applied and device settings.
See users manual for complete breakdown.
/O: 10 Relays
Relay Contacts:
Contact Arrangement: Form C (SPDT)
Contact Rating:
N.O.- 40A @ 240VAC resistive
30A @ 277VAC General Purpose
2hp @ 250VAC
N.C.- 30A @ 240 VAC resistive 30VDC
20A @ 277VAC General Purpose-1/2 hp @ 250VAC
Contact Resistance: < 30 milliohms initial
Contact Material: AgSnO2
Max Switching Power: 9600VA, 1120W
Max Switching Voltage: 277VAC, 110VDC
Max Switching Current: 40A
Electrical Life @ Rated Load: 100K cycles, typ
Mechanical Life: 10M cycles, typ
Connectors:
1/4 inch Tab Connectors
Network:
10/100 Base-T Ethernet
Network Setup:
Static IP address assignment, HTTP port selectable
Relay Control Options: ON/OFF or Pulsed
Pulse Timer Duration:
100ms to 86400 Seconds (1 day)
LED Indicators: 13
-Module Powered
-Relay Coil Energized (1-10)
-Network Linked
-Network Activity
Physical:
Operating Temperature: -40C to 65C ( -40F to 149F)
Size:
9.125in (232mm) wide
2.425in (62mm) tall
4.25in (126mm) deep
Weight: 22oz (626 grams)
Monitor Control:
Web Browser, XML, Modbus/TCP, SNMP, Remote S
Remote Monitoring, and Data Logging
Password Settings:
Password protection on setup page: Yes
Password protection on control page: Optional
Password Encoding: Base 64
Max password length: 10 characters
Regulatory Compliance:
Electromagnetic Compliance:
IEC CISPR 22, CISPR 24
FCC 47CFR15 (-I and -5 Models class B, POE Model
EU EN55024, EN55022
Product Safety:
IEC 60950-1 / EN 60950-1
Additional Applications:
P
P
P
P
P
Automation Controllers
Irrigation Controller
Industrial Automation
Car Wash Industry
More...
Lighting Controller
WebRelay-10
Park Lights
-
8/7/2019 Product_Catalog_Q1_2011
14/27
Features :
Event scheduler with yearly calendar. Schedule up to 100 events. Customizable email alerts.
Up to three temperature and/or humidity sensors can be added for
environmental monitoring (one temperature sensor included).
Dry-contact sensors or switches can be connected for local control of rela
or for monitoring external devices.
Logging; log relay changes, events, Modbus requests, high/low temperature
input changes, network traffic, and more.
Real-time clock, can automatically adjust for daylight savings time, sync wi
NTP server.
System log provides detailed diagnostic information.
Simple scripts can be written in BASIC for advanced functionality.
Configure manually or with DHCP.
WebRelay-10
PlusTen Individual 30-Amp Relays, Two Inputs,Up to Three Temperature/Humidity Sensors
he full featured WebRelay-10 Plus has all the features found on WebRelay-10,us much more. Additional features include an event scheduler, customizable email
erts, two discrete inputs, device logging, and remote temperature and/or humidity
onitoring.
Telephone: 435-750
Sales@ControlByWe
-11-
WebRelay-10 Plus Logging SetupWebRelay-10 Plus Control Page
-
8/7/2019 Product_Catalog_Q1_2011
15/27
Telephone: 435-750
Sales@ControlByWe
-12-
Power Requirements:
Model: X-WR-10R12-IP
Voltage: 10-36VDC
Current: 53mA - 1.2A*
*Current based upon voltage applied and device settings.
See users manual for complete breakdown.
/O: 10 Relays, 2 Inputs, Up to 3 Temperature and/or
Humidity Sensors
Relay Contacts:
Contact Arrangement: Form C (SPDT)
Contact Rating:N.O.- 40A @ 240VAC resistive
30A @ 277VAC General Purpose
2hp @ 250VAC
N.C.- 30A @ 240 VAC resistive 30VDC
20A @ 277VAC General Purpose
-1/2 hp @ 250VAC
Contact Resistance: < 30 milliohms initial
Contact Material: AgSnO2
Max Switching Power: 9600VA, 1120W
Max Switching Voltage: 277VAC, 110VDC
Max Switching Current: 40A
Electrical Life @ Rated Load: 100K cycles, typ
Mechanical Life: 10M cycles, typ
Connectors: 1/4 inch Tab Connectors
Accessory Connector:
5-position, removable terminal strip,
3.81 mm terminal spacing
nputs:
Number of Inputs: 2
nput Type: Discrete Inputs
Temperature Sensors:
1-Wire Dallas Semiconductor DS18B20
Temperature Range: -20C to 40C ( -.4F to 104F)
Accuracy: 0.5 from -10C to +85C
Maximum number of Sensors: 3
Digital Humidity Sensors (optional):
Humidity Range: 0-100%
Accuracy: 1.8%
Network:
10/100 Base-T Ethernet
Network Setup:Static IP address assignment or DHCP, HTTP port selectable
Relay Control Options:
ON/OFF or Pulsed
Pulse Timer Duration:
100ms to 86400 Seconds (1 day)
LED Indicators: 13
-Module Powered
-Relay Coil Energized (1-10)
-Network Linked
-Network Activity
Real-Time Clock:Manual or NTP (Network Time Protocol) setup
NTP Sync Period: Once, Daily, Weekly, On Power-up
Automatic Daylight Savings Adjustment
Battery (capacitor) Power Backup
Capacitor Power Backup:
Backup Functions: Retain Real-Time Clock, External Variables,
Outlet State
Backup Duration: 3 days minimum
Nonvolatile Memory:
Memory Type: Flash
Function: All user settings are stored in nonvolatile m
Physical:
Operating Temperature: -40C to 65C (-40F to 149
Size:
9.125in (232mm) wide
2.425in (62mm) tall
4.25in (126mm) deep
Weight: 22oz (626 grams)
Monitor Control:Web Browser, XML, Modbus/TCP, SNMP, Remote Serv
Remote Monitoring, and Data Logging
Logging:
Storage: Nonvolatile Flash
Butter Architecture: Circular Buffer
Log File Size: 512K (max 17900 logs)
Unlimited data storage from Web Monitoring Service
Password Settings:
Password protection on setup page: Yes
Password protection on control page: Optional
Password Encoding: Base 64
Max password length: 10 characters
Regulatory Compliance:
Electromagnetic Compliance:
IEC CISPR 22, CISPR 24
FCC 47CFR15
EU EN55024, EN55022
Product Safety:
IEC 60950-1 / EN 60950-1
Additional Applications:
P
P
P
P
P
Automation Controllers
Lighting Controller
Industrial Automation
Car Wash Industry
More...
Irrigation Controller
WebRelay-10 Plus
Control ScheduleIrrigation Valvues
-
8/7/2019 Product_Catalog_Q1_2011
16/27
Features :
No programming required. Built-in web server.
Configurable input status web page.
Modbus/TCP support.
XML formatted status.
Built-in counters.
Password protected.
Optically isolated inputs.
Selectable TCP ports.
Loss of power flag.
14-Pin removable terminal connector included.
Two input voltage options:
3-12 VDC
11-28 VDC
Rugged DIN-Rail/wall mountable enclosure.
Three power supply options available:
5 VDC
9-28 VDC
Power-Over-Ethernet (802.3af)
Five-InputModule
Five Optically-Isolated Digital Inputs
he Five-Input Module is a robust, full-featured, Ethernet based data acquisition
evice with five optically-isolated discrete inputs.
he state of the inputs can be monitored over the network using a web-browser,
odbus/TCP, or XML formatted text. Each input can be used as an event counter and
capable of generating email messages when user-defined alarm conditions are
et. In addition, the Five-Input Module can communicate peer-to-peer and trigger
ontrolByWeb relays located throughout the network.
he Five-Input Module is fully configured in minutes using a web browser. No
dditional software is needed.
Telephone: 435-750
Sales@ControlByWe
-13-
Monitor Status/Count of Inputs Configuration Options for Inputs
-
8/7/2019 Product_Catalog_Q1_2011
17/27
Input 3
Input 4
Power
Input 1
Input 2
Input 5
ACT
LINK
Vin+
Vin-
+5
Gnd
In1+
In1-
In2+
In2-
In3+
In3-
In4+
In4-
In5+
In5-FiveInput
Module
seriesdata acquisition
TM
Telephone: 435-750
Sales@ControlByWe
-14-
Power Requirements:
Model: X-DAQ-5I5-5
Voltage: 5VDC5%
Current: 130mA - 339mA*
Model: X-DAQ-5I5-I and X-DAQ-5I24-I
Voltage: 9-28VDC
Current: 40mA - 300mA*
*Current based upon voltage applied and device settings.
See users manual for complete breakdown.
Model: X-DAQ-5I5-E
Power Over Ethernet Option: POE Class 1
0.44 to 3.84 Watt)
/O: 5 Optically Isolated Inputs
Optically Isolated Inputs:
nput Voltage: (5V Input models)
VHigh: 3-12VDC
VLow: 0-1VDC
nput Voltage: (24V Input models)
VHigh: 11-28VDC
VLow: 0-1VDC
nput Current: 4.7mA 25mA (5V Input models)
nput Current: 4.9mA 13.4mA (24V Input models)
Minimum Hold Time on inputs: 62.5mS
nput Isolation: 1500V
Optically Isolated Inputs continued...
Input Functions: Monitor State, Counter, Remote Relay
Control
Input to Remote Relay Settings: Equal, Invert, Toggle,
Latch, Pulse, None
Counters:
Number of counters: 5
Counter Triggers: Input transitions - low to high,high
to low, or both
Maximum Count: 65535
Counter rollover: can be set to rollover or stop
Maximum count rate: 8Hz
Network:
10/100 Base-T Ethernet
Network Setup:
Static IP address assignment, HTTP port selectable
Connectors:
Power/Input: 14-position, removable terminal strip,
3.81mm terminal spacing
Network: 8-pin RJ-45 socket
LED Indicators: 8
-Module Powered
-Inputs (1-5)
-Network Linked
-Network Activity
Physical:
Operating Temperature: -40C to 65C (-40F to 149
Size:
1.4in (35.5mm) wide
3.8in (96.5mm) tall
3.1 in (78.7mm) deep
Weight: 5oz (142 grams)
Enclosure Material: Lexan 923 (UL94 V0 flame rate
Password Settings:
Password protection on setup page: Yes
Password protection on control page: Optional
Password Encoding: Base 64Max password length: 10 characters
Regulatory Compliance:
Electromagnetic Compliance:
IEC CISPR 22, CISPR 24
FCC 47CFR15 (-I and -5 Models class B, POE Model C
EU EN55024, EN55022
Product Safety:
IEC 60950-1 / EN 60950-1
Additional Applications:
P
P
P
P
PP
Event Counter
Monitor a device(s) over IP Network
Extend outpus of a PLC
Home/Office Security
Control Devices in multiple locationsMore...
Access Monitoring
Use with WebRelay-Quad to Extend Dry Contacts to a Remote Location
Door Sensor
Five Input Module
Input3
Input 4
Power
Input 1
Input 2
Input 5
ACT
LINK
Vin+
Vin-
+5
Gnd
In1+
In1-
In2+
In2-
In3+
In3-
In4+
In4-
In5+
In5-FiveInput
Module
seriesdata acquisition
Relay 1Relay 2
Relay3
Relay4
Power
ACT
LINK
Vin+
Vin-
1C
1NC
1NO
2C
2NC
2NO
RelayWEBTM
Quad-LS
3C
3NC
3NO
4C
4NC
4NOFourRelay
Module
Control Switches
Five-Input Module WebRelay-Quad
Input 1
Input 2
Input 3
Input 4
Output 2
Output 3
Output 4
Location A Location B
-
8/7/2019 Product_Catalog_Q1_2011
18/27
Features :
Connect up to four digital temperature sensors (one sensor included). Two relays for controlling alarms or other devices.
No programming required.
Built-in web server.
Configurable control and status web page.
Email alerts when temperature crosses preset threshold.
Modbus/TCP support.
XML formatted status and control.
Password protected.
Selectable TCP ports.
14-pin removable terminal connector included.
Rugged DIN-Rail/wall mountable enclosure.
Three power supply options available:
5 VDC
9-28 VDC
Power-Over-Ethernet (802.3af)
TemperatureModule
1-4 Digital Temperature Sensors
he Temperature Module provides an inexpensive and accurate way to remotely
onitor temperatures over an IP network. It can be used for environmental
emperature monitoring and simple control. Up to four digital temperature sensors
an be connected, and it has two internal relays which can be used to control alarm
gnals, heaters, fans, etc.
sing a standard web browser, users can remotely view temperatures and control
elays. Additionally, computers, PLCs, and automation controllers can communicate
ith the Temperature Module using XML formatted text, or Modbus/TCP.
he unit can be configured to trigger relays or send email messages when a preset
emperature is reached. It can even control relays in other ControlByWeb products
cated somewhere else on the network.
he Temperature Module is fully configured in minutes using a web browser. No
dditional software is needed.
Telephone: 435-750
Sales@ControlByWe
-15-
Current State of Temperature Sensors and Relays Unit Selection and Control Page Setup
-
8/7/2019 Product_Catalog_Q1_2011
19/27
Refrigerator Unit
Telephone: 435-750
Sales@ControlByWe
-16-
Power Requirements:
Model: X-DAQ-2R1-4T-5
Voltage:5VDC5%
Current: 128mA - 421mA*
Model: X-DAQ-2R1-4T-I
Voltage: 9-28VDC
Current: 30mA - 240mA*
*Current based upon voltage applied and device settings.
See users manual for complete breakdown.
Model: X-DAQ-2R1-4T-E
Power Over Ethernet Option: POE Class 1
0.44 to 3.84 Watt)
/O: 2 Relays, Up To 4 Temperature Sensors
Relay Contacts:
Contact Form: SPDT
Contact Material: Ag (Au clad)
Max Voltage: 28VAC
Max Current: 1A
Relay Control Options: ON/OFF or Pulsed
Pulse Timer Duration: 100ms to 86400 Seconds (1 day)
Accuracy of pulse timer: 99.99%
Network:
10/100 Base-T Ethernet
Network Setup:
Static IP address assignment, HTTP port selectable
Connectors:
Power/Relay Contacts/Digital Temperature Sensors:
14-position, removable terminal strip,
3.81 mm terminal spacing
Network: 8-pin RJ-45 socket
Digital Temperature Sensors:
1-Wire Digital Thermometer based on Dallas
Semiconductor part DS18B20.
Temperature Range: 55C to +125C (67F to +257F)
Accuracy: 0.5C from 10C to +85C
LED Indicators: 5
-Module Powered
-Relay Coil Energized (1-2)
-Network Linked
-Network Activity
Physical:
Operating Temperature: -40C to 65C (-40F to 149F)
Size:
1.41in (35.7mm) wide
3.88in (98.5mm) tall
3.1 in (78.0mm) deep
Weight: 5oz (142 grams)
Enclosure Material: Lexan 940 (UL94 V0 flame rated
Password Settings:
Password protection on setup page: Yes
Password protection on control page: Optional
Password Encoding: Base 64
Max password length: 10 characters
Regulatory Compliance:
Electromagnetic Compliance:
IEC CISPR 22, CISPR 24
FCC 47CFR15
(-I and -5 Models class B, POE Model Class A)
EU EN55024, EN55022
Product Safety:
IEC 60950-1 / EN 60950-1
Additional Applications:
P
P
P
P
Environmental Monitor
Remote Temperature Monitor
Temperature Alarm
More...
Refrigeration System Monitor
ACT
LINK
Vin+
Vin-
Temperature
Module
seriesdata acquisition
TM
Relay1
Power
Relay2
+5
Gnd
Tmp
1C
1NC
1NO
2C
2NC
2NO
Temperature Sensor
Refrigerator Unit
Temperature Module
Temperature Sensor
-
8/7/2019 Product_Catalog_Q1_2011
20/27
Features :
Connect up to eight analog signals. Accurate, instrumentation grade ADC.
No programming required.
Built-in web server.
Configurable control and status web page.
Email alerts.
Modbus/TCP support.
XML formatted status.
Selectable TCP ports.
12-Pin removable terminal connector included.
Rugged DIN-Rail/wall mountable enclosure.
Wide power supply range (9-28 VDC).
AnalogModule
Eight High Resolution Analog Inputs
he Analog Module provides a very accurate way to remotely monitor analog signals
ver an IP network. Using analog sensors (not provided), many real-world values
uch as position, water level, flow, voltage, current, etc., can be measured and viewed
emotely. Up to eight analog signals can be connected to the module.
he Analog Module has a built-in web server which allows the inputs to be monitored
real time using a web browser. In addition, data can be accessed from a PLC or
ustom computer application using Modbus/TCP or XML.
he Analog Module is fully configured in minutes using browser-based setup pages.
o additional software is needed.
Telephone: 435-750
Sales@ControlByWe
-17-
Monitor Eight Different Analog Sensors Configuration Page for Analog Inputs
-
8/7/2019 Product_Catalog_Q1_2011
21/27
Telephone: 435-750
Sales@ControlByWe
-18-
Power Requirements:
Model: X-DAQ-8A5-I
Voltage: 9-28VDC
Current: 53mA - 252mA*
*Current based upon voltage applied and device settings.
See users manual for complete breakdown.
/O: 8 Channels
Configure as 8 single-ended, 4 differential, or any
combination
Accuracy: 0.075% Full Scale
Resolution: 10V (24 bit ADC)
nput Range: 0 to 5 Volts (all channels)
Note: Inputs have high impedance so input range caneasily be adjusted using external resistors.
Example: 0 to 10 Volt or 4-20mA
Network:
0/100 Base-T Ethernet Port
Network Setup:
Static IP address assignment, HTTP port selectable
Connectors:
Power/8-Analog Inputs:
12-position, removable terminal strip
Network: 8-pin RJ-45
LED Indicators: 3
-Module Powered
-Network Linked
-Network Activity
Physical:
Operating Temperature: -40C to 65C (-40F to 149F)
Size:
1.41in (35.7mm) wide
3.88in (98.5mm) tall
3.1in (78mm) deep (not including connector)
Weight: 5oz (142 grams)
Enclosure Material: Lexan 940
Flame Rating: UL94 V0
Monitor/Control:
Web Browser, XML, or Modbus/TCP
Alarms:
Email alerts (SMTP), send on/off
commands to other ControlByWeb products
or send analog values to future products.
Password Settings:
Password protection on setup page: Yes
Password protection on control page: Optional
Password Encoding: Base 64
Max password length: 10 characters
Regulatory Compliance:
Electromagnetic Compliance:
IEC CISPR 22, CISPR 24
FCC 47CFR15 (class B)
EU EN55024, EN55022
Product Safety:
IEC 60950-1 / EN 60950-1
Additional Applications:
Voltage Monitor
Current Monitor
Monitor Temperature
Monitor Water flow
Monitor Position HeightMore...
Fluid Level Monitor
ACT
LINK
Vin+
Vin-
+5V Ref
AGnd
A7
A3
A2
A1
A0
A6
A5
A4
Power
AnalogtoDigital
converter
8-channel
Fluid Level Float Sensor
Current Transducer
ACT
LINK
Vin+
Vin-
+5V Ref
AGnd
A7
A3
A2
A1
A0
A6
A5
A4
Power
AnalogtoDigital
converter
8-cha
nnel
Power Monitor
Power Cable
Analog Module
-
8/7/2019 Product_Catalog_Q1_2011
22/27
Features :
Control from a standard web browser - no special software required. Automatic Reboot, use to reboot devices when ping responses fail.
Built-in web server provides direct access to device; no external servers,
services or subscriptions required.
Supports HTTP, SNMP, and Modbus/TCP.
"Remote Services" can be used to initiate connection with external servers
Password protection.
IP filter provides simple firewall.
Selectable TCP Ports.
10/100 Mbps Ethernet connectivity.
Field re-programmable; install firmware updates when available.
Attractive, rugged enclosure made of flame resistant plastic.
Operates worldwide (100-240V AC; 50/60Hz).
Wall mountable or optional rack mounting kit available.
WebSwitch 2 Electrial Outlets, Remote Control,Automatic Reboot
Telephone: 435-750
Sales@ControlByWe
-19-
WebSwitch Control Page
Outlet Options
WebSwitch Remote Power Switch is the ideal solution for remote reboot and many
emote power control applications. WebSwitch has two power outlets which can
e independently controlled using a web browser. It is completely self-contained and
ncludes a built-in web server, so no external servers, services, or subscriptions
re required.
n addition to remote control, WebSwitch has an automatic reboot controller which
an be configured to reboot computers or network devices when they become
nresponsive.
WebSwitch is available in two models, WebSwitch and WebSwitch Plus.
Both models are engineered to provide excellent performance for many years while
unning 24/7. You can have confidence using WebSwitch when your critical
pplications demand reliability and integrity.
-
8/7/2019 Product_Catalog_Q1_2011
23/27
1
1
2
2
3
3
4
4
5
5
Telephone: 435-750
Sales@ControlByWe
-20-
Power Requirements:
nput Voltage: 85-125V AC
nput Frequency: 47-63Hz
nput Connector: IEC Appliance Connector (C14 Male)
Max Input Current: 10A
DO NOT USE WEBSWITCH TO CONTROL MORE THAN 10 AMPS)
Outlets:
Number of Outlets: 2
Outlet Connectors: IEC Appliance Connector (C13 Female)
Outlet Control Options: On/Off or Pulse
Network:
0/100 Base-T Ethernet IPv4
Network Setup:
Static IP address assignment or DHCP, HTTP port
selectable
Network Connector: 8-pin RJ-45 socket
LED Indicators: 5
Module Powered
Outlet 1 On
Outlet 2 On
Network Linked
Network Activity
Physical:
Operating Temperature: -20 C to 40 C (-4 F to 104 F)
Size:
10.65 inches (27.11 cm) wide
1.75 inches (4.44 cm) tall
3.29 inches (8.36 cm) deep
Weight: 1 lb. 3 oz. (542 grams)
Enclosure Material: Lexan 940 (UL94 V0 Flame Rated)
Monitor/Control:
Web Browser, XML, Modbus/TCP, SNMP, Remote Services
Remote Monitoring
Password Settings:
Password protection on setup page: YesPassword protection on control page: Optional
Password Encoding: Base 64
Max password length: 13 characters
Regulatory Compliance:
Electromagnetic Compliance:
IEC CISPR 22, CISPR 24
FCC 47CFR15
EU EN55024, EN55022
EN55022:2006: Class B
EN61000-3-2
EN61000-3-3
EN55024:2006
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11ITE-Class B
Product Safety:
IEC 60950-1 / EN 60950-1
Additional Applications:
P
P
P
Reboot Network Devices
Reboot Computers
More...
Automatic/Remote Reboot for Servers
WebSwitch
POWER IN100-240V 50/60Hz
10A MAX
OUT 1 OUT 2WARNING! OUTPUT VOLTAGE = INPUT VOLTAGE
OUTPUT CURRENT
-
8/7/2019 Product_Catalog_Q1_2011
24/27
Additional Features :
Up to four temperature and/or humidity sensors can be added forenvironmental monitoring (one temperature sensor included).
Dry-contact sensors or switches can be connected for local control of
outlets or for monitoring external devices.
Real-time clock, can automatically adjusts for daylight savings time, sync
with NTP server.
Added relay contact protection.
Event scheduler with yearly calendar.
Customizable email alerts.
Logging; log outlet changes, automatic reboots, high/low temperatures,
network traffic, and more.
System log provides detailed diagnostic information.
Simple scripts can be written in BASIC for advanced functionality.
Configure manually or with DHCP.
WebSwitchPlus
2 Electrial Outlets, Automatic andRemote Reboot, Two Discrete Inputs,
Temperature/Humdity Monitoring, Event Scheduler
Telephone: 435-750
Sales@ControlByWe
-21-
WebSwitch Plus Control Page
Event Scheduler
WebSwitch Plus includes all the features of WebSwitch as well as additional
features such as remote temperature monitoring, discrete inputs, event
scheduling, logging, and email alerts. This provides a more complete solution for
remotely controlling servers and monitoring their environment.
WebSwitch with optional Rack Mount Kit
-
8/7/2019 Product_Catalog_Q1_2011
25/27
Telephone: 435-750
Sales@ControlByWe
-22-
Power Requirements:
nput Voltage: 85-125V AC
nput Frequency: 47-63Hz
nput Connector: IEC Appliance Connector (C14 Male)
Max Input Current: 10A
DO NOT USE WEBSWITCH TO CONTROL MORE THAN 10 AMPS)
Outlets:
Number of Outlets: 2
Outlet Connectors: IEC Appliance Connector (C13 Female)
Outlet Control Options: On/Off or Pulse
Accessory Connector:5-position, removable terminal strip,
3.81 mm terminal spacing
nputs:
Number of Inputs: 2
nput Type: Discrete Inputs
Temperature Sensors:
-Wire Dallas Semiconductor DS18B20
Temperature Range: -20C to 40C ( -.4F to 104F)
Accuracy: 0.5 from -10C to +85C
Maximum number of Sensors: 3
Maximum Distance from WebSwitch to Sensors:
20 feet with one sensor/60 feet with three
Digital Humidity Sensors(optional):
Humidity Range: 0-100%
Accuracy: 1.8%
Network:
0 Base-T or 100 Base-T Ethernet IPv4
Network Setup:
Static IP address assignment or DHCP, HTTP port selectable
Network Connector: 8-pin RJ-45 socket
LED Indicators: 5
-Module Powered
-Outlet 1 On
-Outlet 2 On
-Network Linked
-Network Activity
Real-Time Clock:
Manual or NTP (Network Time Protocol) setup
NTP Sync Period: Once, Daily, Weekly, On Power-up
Automatic Daylight Savings Adjustment
Battery (capacitor) Power Backup
Capacitor Power Backup:
Backup Functions: Retain Real-Time Clock, External
Variables, Outlet State.
Backup Duration: 3 days minimum
Nonvolatile Memory:
Memory Type: Flash
Function: All user settings are stored in nonvolatile
memory.
Physical:
Operating Temperature: -20 C to 40 C (-4 F to 104 F)
Size:
10.65 inches (27.11 cm) wide1.75 inches (4.44 cm) tall
3.29 inches (8.36 cm) deep
Weight: 1 lb. 3 oz. (542 grams)
Enclosure Material: Lexan 940 (UL94 V0 Flame Rated)
Monitor/Control:
Web Browser, XML, Modbus/TCP, SNMP, Remote Services
Remote Monitoring, and Data Logging
Logging:
Storage: Nonvolatile Flash
Butter Architecture: Circular Buffer
Log File Size: 512K (max 17272 logs)
Unlimited data storage from Web Monitoring Servi
Password Settings:
Password protection on setup page: Yes
Password protection on control page: Optional
Password Encoding: Base 64
Max password length: 13 characters
Regulatory Compliance:Electromagnetic Compliance:
IEC CISPR 22, CISPR 24
FCC 47CFR15
EU EN55024, EN55022
EN55022:2006: Class B
EN61000-3-2
EN61000-3-3
EN55024:2006
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11ITE-Class B
Product Safety:
IEC 60950-1 / EN 60950-1
Additional Applications:
P
P
P
Reboot Network Devices
Reboot Computers
More...
Environmental Monitoring/Automatic/Remote Reboot for Servers
1
1
2
2
3
3
4
4
5
5
Wall Outlet
Ethernet Switch
Server
WebSwitch Plus
WebSwitch
POWER IN100-240V 50/60Hz
10A MAX
OUT 1 OUT 2WARNING! OUTPUT VOLTAGE = INPUT VOLTAGE
OUTPUT CURRENT
-
8/7/2019 Product_Catalog_Q1_2011
26/27
Temperature
Monitoring
Relays/
Outputs
Inputs
Humidity
Monitoring
Scheduling
Email
Notifications
Logging
Automatic
Reboot
RealTime
Clock
HTTP
Modbus
SNMP
SMTP
Rem
ote
Services
SupportedProtocols
Input
Counters
PowerSupplyOptions
5VDC
9-28VDC
10-36VDC
100-240VAC
POE
Enclosure
X-300
X-301
WebRelay-DualSeriesIII
WebEnabledThermostat
WebRelay
WebRelay-Quad
WebRelay-10
WebRelay-10Plus
Five-InputModule
Te
mperatureModule
An
alogModule
WebSwitch
WebSwitchPlus
Telephone:435-750-5999
S
l
@C
lB
W
b
Fea
tureComparison
3Relays
24V,3A
2Relays
28V,5A
1Relay
240VAC,12A
4Relays
28V,1A
10Relays
240VAC,30A
10Relays
240VAC,30A
2Relays
28V,1A
2ACOutlets
120or240V
2ACOutlets
120or240V
2Isolated
Inputs
1Isolated
Input
2Discrete
Inputs
5Isolated
Inputs
8Analog
Inputs
2Discrete
Inputs
ThermostatMode
DINRail
or
Wall-Mount
DINRail
or
Wall-Mount
DINRail
or
Wall-Mount
DINRail
or
Wall-Mount
DINRail
DINRail
DINRail
or
Wall-Mount
DINRail
or
Wall-Mount
DINRail
or
Wall-Mount
Desk
Wall-Mount
Rack-Mount
Desk
Wall-Mount
Rack-Mount
Product
*
*Humiditysensorsareoptional
-
8/7/2019 Product_Catalog_Q1_2011
27/27
Trademark and Copyright Information
This document is Copyright 2010 by Xytronix Research & Design, Inc. All rights reserved.WebSwitch, WebRelay, ControlByWeb, and Xytronix Research & Design are trademarks of Xytronix Research & Design, Inc. 2010.
All parts of these products and designs including but not limited to firmware, hardware design, schematics, PCB layout, concept, graphics, users manual, etc., are property of Xytronix Research
Design, Inc. 2010. These products may not be opened, disassembled, copied or reverse-engineered.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying or scanning, for any purpose other than the personal
use by the purchaser of these products. Xytronix Research & Design, Inc., assumes no responsibility for any errors that may appear in this document.
Whereas reasonable effort has been made to make the information in this document as useful and accurate as possible, Xytronix Research & Design, Inc. assumes no responsibility for the
application, usefulness, or completeness of the information contained herein. Under no circumstance will Xytronix Research & Design, Inc. be responsible or liable for any damages or losses
including direct, indirect, special, incidental, or consequential damages or losses arising from either the use of any information contained within this manual or the use of any products or servic
referenced in this document.
Xytronix Research & Design, Inc. reserves the right to change any products features, specifications, documentation, warranties, fee schedules, and conditions at any time and without notice.
WarrantyAll Xytronix Research & Design, Inc. products have a warranty against defects in material and workmanship for a period of one year from the date of shipment. During the warranty period, Xytro
Research & Design, Inc. will, at its option, either repair or replace products that prove to be defective. This warranty is extended to the original purchaser of the equipment only.
For warranty service or repair, the product must be properly packaged, and returned to Xytronix Research & Design, Inc. The purchaser shall prepay all charges for shipping to Xytronix Researc
Design, Inc., and Xytronix Research & Design, Inc. will pay the shipping charges to return the product to the purchaser as long as the product is shipped within the United States. If the product is
shipped outside of the United States, the purchaser shall pay all shipping charges, duties, and taxes.
Limitation
The foregoing warranty shall not apply to defects or damage resulting from improper use or misuse, unauthorized repair, tampering, modification, improper connection, or operation outside theelectrical/environmental specifications for the product. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes, and tornadoes. This warranty does not cover damage tproperty, equipment, direct, indirect, consequential, or incidental damage (including damage for loss of business profit, business interruption, loss of data, and the like) arising out of the use or
misuse of this product.
UNDER NO CIRCUMSTANCES WILL THE LIABILITY OF XYTRONIX RESEARCH & DESIGN, INC. TO THE PURCHASER OR ANY OTHER PARTY EXCEED THE ORIGINAL PURCHASE PRICE OF THE
PRODUCT, REGARDLESS OF THE FORM OF THE CLAIM. No other warranty is expressed or implied. Xytronix Research & Design, Inc. specifically disclaims the implied warranties or merchantabi
and fitness for a particular purpose. Some jurisdictions may not allow the exclusion of limitation of liability for consequential or incidental damage.