products & solutions for the recycling & … & solutions for the recycling & waste...
TRANSCRIPT
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIES
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
20 Years of WastechEstablished in 1993, for 20 years Wastech has grown from a tiny three man out�t, to over 90 employees; one of the largest suppliers of equipment and solutions for the waste and recycling industries in Australia.
Nation-wide, we pride ourselves on extrensive industry knowledge coupled with state of the art equipment, to provide the best solution on the market, all backed by 24/7 service and repairs in every state.
COMPANY PROFILE
PRODUCTS & SOLUTIONSWith over 20 years of experience supplying waste and recycling equipment, both Australia wide and internationally, Wastech consultants have an extensive industry knowledge coupled with state of the art equipment that will save you both time and money.
Whether it’s general waste, cardboard, plastic, e-waste or polystyrene, Wastech has a solution for your site. From Melbourne to Darwin, Brisbane to Perth, Sydney to Adelaide; our waste management consultants are able to tailor solutions for each unique site to save on costs, while promoting a sustainable future.
Our national 24 hour, 7 day per week maintenance and breakdown response service, ensures all our products, including compactors, balers, chutes, transfer stations and material recovery facilities, can continue to operate around the clock. Our waste management consultants are available to provide you with the support you need, from initial plans and purchase, to after installation services. Contact us to learn more today.
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
BRAMIDAN BALERS
COMPACT & CONTROLWastech are the sole Australian importer and agent for Bramidan Balers from Denmark. Bramidan Balers are recognised throughout Europe as one of the best waste management solutions, for their immaculate design and quality. Simply put, Bramidan Balers are the best in the world.
Bramidan Balers are capable of not only compacting cardboard and plastic, but materials such as e-waste and metals. The full Bramidan range caters for volumes anywhere from small fruit shops to waste transfer stations.
Baler
B-Series
B3
B5 Wide
B20
X-Series
X25
X50
(W x H)
700 x 460
1000 x 500
1200 x 550
1090 x 530
1090 x 610
Filling Opening Bale Size Bale Weight
(W x D x H)
700 x 500 x 650
1000 x 700 x 800
1200 x 800 x 850
1200 x 800 x 800
1200 x 800 x 1100
(kg)
30-50
80-110
200-250
250-300
400-450
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
LARGE VOLUMES, ULTIMATE COMPACTIONCrush and compact your waste. Wastech Stationary and Transportable Compactors can be designed to suit your speci�c site requirements and handling/loading methods. Our experienced consultants are industry leaders in both design and execution; working closely with you to obtain the very best solution, tailored to your needs.
NEW INNOVATIONS
Smart Stroke Blade Compactor: • Doubled Compactor Life • Halved Power Consumption • Increased Labour E�ciency
Smart Weigh Compactor: • Bin Lifter and Hand Load Capable • User-by-user Breakdown of Waste Volume Received • Fair and Equitable Distribution of Disposal Cost for Multiple Users
Compactor
T1000/Rotapak
ST1000
S1500
S2000
S3000
S4000
S8000
Transportable
Stationary
Stationary
Stationary
Stationary
Stationary
Stationary
Type Throughput (m3 / hr) Cycle Time (sec)
90
110
110
110 or 142*
110 or 142*
310
510
40
40
47
55 or 43*
70 or 55*
60 or 45*
45
*dependent on motor size
COMPACTORS
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
AUTOMATIC OR MANUAL TIEDue to their compact design, Presto Horizontal Balers require little space to manage huge volumes. They are used to compact large quantities of recycling materials, making stable, stackable bales which help you to use your storage space and transportation capacity e�ciently; reducing your costs and labour.
Reliable function and user-friendliness go without saying for all Presto products; not only in operation, but also in terms of integration into the working environment. A Presto Horizontal Baler is ready for use as soon as the machine hits the �oor.
These systems can be fed continuously, either manually or by machine conveyors; all models featuring either manual or automatic tie methods.
Baler
CC-Series
CC13
CC20
CC40
HPK-Series
HPK50 BK
HPK70
(W x D)
750 x 750
1000 x 750
1030 x 1100
1250 x 1050
1600 x 1050
Filling Opening Bale Size Bale Weight
(W x D x H)
1000 x 750 x 700
1000 x 750 x 700
1000 x 1100 x 750
1000 x 1100 x 700
1000 x 1100 x 700
(kg)
150-180
200-220
400
500
600
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESDISCOVER MORE AT WASTECH.COM.AU // 1800 465 465
PRESTO HORIZONTAL BALERS
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
SHREDDERS & CRUSHERS
DOUBLE YOUR COMPACTIONCombined with a Presto High Force Auger, either a crusher or shredder can handle cardboard pallets, plastic, PET bottles and even wooden pallets. More than double your compaction and halve your transport, all in one combination.
A PROVEN DOUBLE-BLOWFirst, the crusher is designed to destroy the integral shape of any loose material, sheets or even pallets; tearing it all to shreds.
The High Force Auger then compacts this treated material, achieving up to double the bin weights when compared to conventional compactors. As the material has been torn and crushed emptying of the bin is assured even with these higher weights.
NEED SOMETHING BIGGER?The range of Untha Shredders from Austria, imported exclusively by Wastech, are designed for high-volume industrial applications. If it needs shredding, Wastech have the solution.
Expected Compactor Bin Weight in 31m3 Bin (Tonnes)
Cardboard
Plastic
PET Bottles (with perforator)
Wooden Pallets
Cardboard Pallets (with cardboard crusher)
Residual Waste from Sorting Plant
8.0 +
8.0 +
7.5 +
6.5 +
9.0 +
10.5 +
*tonnage dependent on bin size
Material
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
MATERIAL RECOVERY FACILITIES
THE NEXT GENERATION IN RECYCLINGWastech Engineering, as an industry leader in concept design and manufacture of waste handling equipment and systems for transfer stations and resource recovery centres throughout Australia, are now proud to be part of the leading global team: CP Group.
WE BUILD FACILITIES TO SORT Co-mingle Construction and Demolition (C&D) Commercial and Industrial (C&I) The CP Group is your one-stop-shop industry-proven company to turn to for the most technologically advanced sorting systems and equipment. So if you are looking for a partner who can provide state-of-the-art, turn-key solutions for your material recovery facility, trust the global leader.
RECYCLING SORTING EQUIPMENT Conveyors Optical Sorters Air Separation Magnetic Separation
Wastech provide all the equipment for all types of material recovery facilities, from the tipping �oor, to the bale storage area and everything in between. Our systems are smart systems; thanks to our intelligent motor control systems, all of our equipment is fully integrated. We o�er solutions for plastic, cardboard, paper, aluminium, steel, E-waste and glass separation.
Municipal Solid Waste (MSW)Engineered Fuel (WtE)E-Waste
Disc ScreensTrommel ScreensIntelligent Motor ControlsEddy Current Separators
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
TRANSFER STATIONS
THE COMPLETE SOLUTIONWastech are leaders in concept design, manufacture and installation of Transfer Station Systems to suit all waste types, through-puts and geographical challenges. From open top skips in small regional areas, to high throughput compactors and waste balers for busy metropolitan facilities, Wastech have a solution for all client speci�c requirements.
MOVING FLOORSWastech Engineering Moving Floors are an e�cient and cost e�ective means of moving product in a waste receival pit and replace the outdated and often dangerous means of moving product in a pit via a push blade, dozer or front end loader.
TRANSFER TRAILERSThe Wastech Engineering compaction transfer trailer has a large, uninterrupted, smooth appearance that enhances our customer’s corporate image and allows for signage and logo display to be the main feature of the Wastech Cleanline Trailer.
Our trailer incorporates the use of Hardox 450 high tensile plate in the body which is able to withstand the high piercing forces experienced during the compaction process of
industrial type wastes. Subsequently this gives a greatly reduced tare weight and increased payload. The body comes with an integral hydraulic pusher blade for positive ejection of the load at the destination. Wastech trailers have the option of either hydraulic or manual rear doors.
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
SMOOTHTUBES CHUTES
SUPER-SMOOTH HIGH-RISE CHUTE SOLUTIONSWelcome to Wastech’s revolutionary plastic chute system. Smoothtubes™ feature an internal �nish that has 80% less friction than steel, making them quieter and smoother than traditional steel and cement chutes. The moulded connection between the loading throat and vertical chute minimises the impact area. No sharp angles means a faster, less restricted, continuous �ow from the stainless steel loading door down to the basement or collection point.
INSTALLATIONChute sections weigh no more than 15kg each allowing easy transport and installation by hand without reliance on Tower Cranes. Gas style nail guns are used to �x the chute mount to the slab to reduce install time. Bricking up instructions are detailed on the front panel of every loading throat, which stays �tted until installation of loading door to prevent unauthorised use and potential damage from building rubble.
MAJOR PROJECTSEureka Tower Melbourne Cricket GroundRoyal Domain 550 Flinders Street
OPTIONAL EQUIPMENT Penetration Forming Ring Automatic Bin Feed Systems Garbage Compactors Manual Bin Handling Equipment Flushing Spray
Collection BinsOdour Control SystemsEquipment & Bin Monitoring Systems
Nominal Internal Diametre
Material
Thickness
Mounts
Noise & Vibration Prevention
Ventilation
Loading Throat
530 mm
LLDPE (Linear Low Density Polyethylene)
7.5 mm nominal
10 mm LLDPE
Not Required
200 mm Galvanised Steel Fan
440 x 440 mm
Speci�cations
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
THE EVOLUTION OF TIME-TESTED DESIGNSimple yet strong, light yet durable. The design brief for the EVO 31 was born from existing, time tested designs and evolved into a reliable, maintenance-friendly truck that will go the distance.
PURE INNOVATIONWith a 90% content of high tensile steels from the Hardox, Domex and Weldox range, the EVO31 body, blade and arm construction combines light 6.8t tare weight with rugged durability. Seamless body and door construction provide more accurate body dimensions to reduce blade clearance, resulting in less mess and a cleaner operation.
The touch screen control provides operator friendly control, built in CCTV interface and maintenance/ help screens. Customisable fault or hazard warnings have options of visual and/or audible warnings that are logged in a maintenance �le for monitoring. All pressure, timer and counter functions are adjusted from the touch screen without the need of a laptop or electrician to drive it.
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
FRONT LIFT TRUCKS
STANDARD INCLUSIONSHardox 450 single piece walls, roof and blade runners/ wear strips Touch screen control with provision for up to 4 colour cameras Proportional control of pack blade for better control and protection Remote mounted ECU and electricals for cleaner, simpler cab �t-out
Floor mounted sump and through the blade trape door for ease of muck out Water tank bottle with hand cleaner Side and rear spot lights as well as high level tail lights Load tested fall restraint harness cables on top of body Half pack with full eject Laser-guided pack blade for accurate control of packing and eject functions
PLANNING & CONSULTANCYPreparing a plan to manage the waste and recycling needs of your development is an important part of the planning application process.
At Wastech, our experienced waste management consultants will work closely with you to deliver a comprehensive report that complies with council codes, BCA, Australian Standards and statutory requirements.
FROM PROJECT INCEPTION TO COUNCIL SUBMISSIONOur consultants will provide:
Waste stream and volume assessment Equipment recommendations Collection alternatives Operational requirements
From low, medium or high density residential developments, through to large commercial or mixed use developments, Wastech will deliver a waste management plan that maximizes your projects space and design objectives.
Preliminary Advice: Talk to an experienced waste engineer to consider waste and recycling elements at design phase.
Priority Service: Fast, e�cient and reliable service with complete reports available within �ve business days.
Tailored & Comprehensive Reports: We will work closely with you to address any speci�c planning requirements or concerns relevant to your project.
WASTE MANAGEMENT PLANS
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
3D CONCEPT DESIGN
ELEGANT, EASY AND EFFICIENTSee your design in a whole new perspective with Wastech’s 3D CAD layouts. From initial drawing to �nal build, these layouts provide a perfect picture of your site. For anything from a simple compactor install, to an entire waste sorting facility. We’ll even provide our �les to your builders and architects to allow them to simply drop our units into your site design.
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
24/7 SERVICE & SUPPORT
24 HOURS A DAY, 7 DAYS A WEEK, 365 DAYS A YEARWith a dedicated service and repair line available 24 hours a day, 7 days a week, 365 days a year for breakdowns and technical assistance, no site is ever left unattended.
Our own Cloud Based Service and Support Network (CBSSN) makes the tracking of equipment, scheduled servicing and inspections streamlined, simple and e�cient. A full history for every single unit ensures the job is done right, with reports available at the touch of a button.
Each of our technicians has the ability to remotely access our CBSSN system directly via iPad. All the details of the service or breakdown are provided in full to the technician before they even reach the site; reducing your costs and downtime.
Nation-wide, every minute of every day, Wastech have it covered.
Wastech Engineering PtyLtd (BU)
Completed Tasks by State
Date: 30-May-2013
Date Requested: All
Ref No Jobnumber Task Description Status Task TotalSell
Task TotalCost
RequestedDate
CompletedDate
VictoriaEquipment
the_1 1 53 RJS MareebaInstall & Train
RJS Mareeba - B-3 baler delivery,installation and training
Completedand
InvoiceProcessed
$340.00 $340.00 20/1/2012 15/6/2012
vins1 697 Vins Bins-Dromana
Vins Bins- 45 Brasser AvenueDromana- Walking floor notworking- also remote faulty- whengets to 3/4 full- 0419 132 498-Vin.
Completedand
InvoiceProcessed
$86.00 $41.25 27/2/2012 18/6/2012
ab e3 763 Coles Bendigo Investigate fault with DaniTechpower pack
Completedand
InvoiceProcessed
$510.00 $510.00 1/3/2012 18/6/2012
wast_3 5 797 Baler DemosMarch 2012 Baler Demos March 2012
Completedand
InvoiceProcessed
$7,994.69 $5,858.45 2/3/2012 30/6/2012
behm1 1043 Moubray St.Repairs
Remove existing waste chute doorsand replace linen chute doors onlevels 1 & 2.
Completedand
InvoiceProcessed
$2,281.36 $1,171.58 16/3/2012 30/6/2012
qv19 1054 Dock 1 g/wcompactor
Dock 1 g/w compactor not working,as report by damien long, ph:0409723615
Archived $0.00 $0.00 17/3/2012 30/6/2012
comm5 1168 Eco packer Eco packer wont run Completed
andInvoice
Processed
$340.00 $161.00 24/3/2012 15/6/2012
veol_177 1256 Federationsquare
G/ W compactor not working . Asasked by Ail after hours call out .. Archived $0.00 $0.00 28/3/2012 29/6/2012
cent_83 1317 Bin lifter notworking .Dock 1
Bin lifter not working Dock1 Calledin by Gary 0437703131
Completedand
InvoiceProcessed
$0.00 $0.00 31/3/2012 18/6/2012
veol_183 1322 Compactor notworking
After hours call out ! Task given toservice tech by Bill Smith asked toattend Epworth hospital ascompactor is not working ,traveledto site found fault rev contact,changed with forward contact andmade no differents ,changed backand rang electrtion ,was tolled thata problem with circuit bourd wouldbe more likely and that he wouldhave to attend to look at unit .
Archived $0.00 $0.00 1/4/2012 18/6/2012
Wast4 1720 TRAINING FORJEREMY
ONGOING TRAINING FOR JEREMY-WITH TERRY
Completedand
InvoiceProcessed
$5,450.00 $2,631.34 30/4/2012 30/6/2012
wast_3 13 2360 Baler DemosJune Baler Demos June
Completedand
InvoiceProcessed
$9,360.33 $4,784.11 29/5/2012 30/6/2012
veol_1161 2425 Melb Ex TP002 Melbourne Exhibition Center Foodand Wine Festival unit # TP002going up then sticking. Site contactJohn Dixon entry under bridge
Completedand
InvoiceProcessed
$375.00 $196.22 31/5/2012 14/6/2012
cent_1 17 2504 Compactor won'trun
Completedand
InvoiceProcessed
$157.50 $120.75 3/6/2012 15/6/2012
wast_10 1 2596InghamsChickensThomastown
not picking cardboard up- please seesecurity and ask for Mahend
Completedand
InvoiceProcessed
$367.50 $261.63 8/6/2012 30/6/2012
vins4 2597 Vinsbins S2000 compactor has gone out onlow oil, as reported by Vince.
Completedand
InvoiceProcessed
$357.00 $206.93 9/6/2012 9/6/2012
colo_127 2598 Altona gate s/c Investigate fault with binlifter ong/w compactor, as reported by Ali(veolia).
Completedand
InvoiceProcessed
$315.04 $241.54 9/6/2012 9/6/2012
Pric
e D
ata
Company Name:
Site Name:
Date:Job No:
Visy Recycling - Campbellfield 16/3/2012Baler OHS Compliance Report
COMMENTS or ACTION REQ'D
Entrapment Points Check rear tie of slots Na
Top of Baler Ok
Blade guide protrusion at top Ok
Check in general for other entrapment points Ok
Blade Stops in top position at end of cycle and shuts down Baler. Yes
Check guides for excessive wear or bending. Ok
Service Acces Panels to be bolted requiring tools to remove. Yes
Pressure relief valves to be lockable or tamper proof. Yes
Controls Electrical control panel access door key lockable. Yes
Positioned to allow viewing of loading door. Yes
Positioned to prevent accidental operation or shielded to suit. Yes
Manual buttons(levers) to stop action when released. Na
All controls to be clearly labeled or identified. Yes
Mushroom type emergency stop button at the control point. Yes
Loading Door Top door to have double contact type interlock switch Magnetic switch
Baler shuts down when door is opened 25mm. Yes
Door locks to be positive style & in safe, serviceable order. Yes
Bottom door not to open without top door open. Yes
Door locks designed for minimum kick back when released. Yes
Signage Safety signage, stickers & safe operating procedure placard. Fitted
P/Pack Power pack to be clear of rubbish and in clean, safe condition. Ok
Electricals Check power lead and plug condition. Ok
Check wiring and conduit condition. Ok
Tie Off Check tie off access. Ok
Check bale release mechanism & function. Ok
Cleanliness Rubbish build up around Baler. Clean
Check for any oil leaks from baler unit. No leaks
General Check auto cycle operation and auto shut down. Ok
Base feet or mounts are stable. Ok
Tie off tool present. Present
Access for crane truck to remove unit for repair. Good access
General Condition ReportNew unit in service
The above inspection report is a summary of the Victorian WorkCover Authority "Health and Safety at Work - The Waste Management andRecycling Industry" Guide and should be regarded as minimum requirements.
Site Address: Western Hwy Cnr Westwood Dve
976
Burnside VIC
Make/Model: B-5 W BalerPVB 320 878-1Serial No:
Cust Equip No: PVB 320 878-1
Masters Burnside
Larry Croft 16/3/2012 @ 9:11AM
Company Name:
Site Name:
Date:Job No:
Wastech Holdings Pty Ltd 27/9/2012Baler Service Report Sheet
DESCRIPTION OF WORK:- MINOR SERVICE
MINOR SERVICE (6 Monthly)
Container should be approximately 75% full. COMMENTS / ACTION REQD.
Operation Check all controls are serviceable & working.X Baler is working fine
Check manual & auto cycle, count cycles.X All ok
Pressures Record main system pressure. (psi) 0
Record pressure switch setting. (psi) 0
Lubricate Grease Baler and assoated components.X Done
Door hinges, locks and all limit switch rollers.X All lubed all good
Check Hydraulic oil level with pack cylinder retracted.X Good
Hydraulic oil condition for colour and contamination.X Good
Condition of hoses, fittings, pump and cylinders for leaksX No leaks all ok
Blade, floor and side walls for wear.X All ok
Limit switch operation, adjustment & mounting.X Cleaned all ok
Check Door Locks for wear or damageX All ok
Check S.O.P. and Safety Stickers present and legibleX Fitted
All safety interlocks shut down Baler when tripped.X Yes
All inspection covers and guards are fitted.X All fitted
Is Baler StableX Yes
Rubbish build up & cleanliness.X No build up
Auto tie Grease all pivots and check cylinders and clamping.X Done
Eject syst Check condition, straps, clamps & pivot bars.X All lubed and checked all good
Check tie off tool is presentX NA
MAJOR SERVICE (12 Monthly) - as above and including the following:
Container should be absent. Parts Used
Drain & clean hyd. tank and refill with new oil.
Replace suction strainer and return filters.
Clean and check filler breather and sight glass.
Clean and check filler breather and sight glass.
Extras
REPORT: (Any work required and cleanliness)
I hereby acknowledge that Wastech Engineering have completed all the above work to my satisfaction:
Site Address: Western Hwy Cnr Westwood Dve
4553
Burnside VIC
Make/Model: B-5 W BalerPVB 320 878-1-OLDSerial No:
Cust Equip No: PVB 320 878-1-OLD
Masters Burnside
Ellen Dagastine. 27/9/2012 @ 10:33AM
CBSSN Example Report
CBSSN Example Report
EQUIPPED AND READYSporting 1000 square metres of �oor space, the Wastech Repair Centre is fully equipped to repair and refurbish anything from Front Lift Bins to Front Lift Trucks.
Our talented technicians, with the support of ourengineers, won’t turn down a challenge. A dedicated site with accredited AS4801 OH&S standards and an experienced eye for quality means your equipment is safe, renewed and ready for action.
Drive in your truck, leave your lifter, call us to collect or just call for an opinion. If it breaks down, breaks up or is just plain worn out, we’ll �x it.
PRODUCTS & SOLUTIONS FOR THE RECYCLING & WASTE INDUSTRIESdiscover more at wastech.com.au // 1800 465 465
REPAIR CENTRE
v1.2.0SE-FLT
Head O�ce33 Wedgewood RoadHallam, Victoria 3803
Australia
1800 465 [email protected]
MailingPO Box 5094
Hallam, Victoria 3803Australia