E2/70453

PROFESSIONAL AUTOMOTIVE TOOL RANGE

E2/70453

PROFESSIONAL AUTOMOTIVE TOOL RANGE

Next to the existing tool range, including the sonic tension tester STT-1, the DriveAlign® laser alignment device and the Dr. Gates professional tool kit, Gates now also offers a wide line of universal and engine-specifi c tools for synchronous

and accessory belt drive systems. These high-quality tools allow Gates to be a “One-stop-shop” supplier for all products and services needed to provide a complete, professional and OE equivalent maintenance of belt drive systems.

Gates’ new tool range covers the most popular car engines and is therefore the ideal solution for every professional automotive technician.

2

GAT

4404

BENGINE-SPECIFIC TOOLS

GAT

4388

A

GAT4388A

Citroën/PeugeotPetrol TU/XU and Diesel TUD/XUD

Models:

Citroën: AX, BX, C3, ZX, XM, Visa, Saxo, Xsara/Picasso, Xantia, Synergie/Evasion, Berlingo, Dispatch/Jumpy, C15, C25 and Relay/Jumper (84-04)

Peugeot: 106, 205, 206, 305, 306, 307, 309, 405, 406, 605, 806, Expert, Partner and Boxer (86-04)

Engines:

Petrol: 1.0, 1.1, 1.3, 1.4, 1.6, 1.8, 1.9 and 2.0/TurboCodes: TU1, TU2, TU3 and TU9 / XU5, XU7, XU9 and XU10

Twin Cam: 1.6, 1.8, 1.9 and 2.0 16v.Codes: TU5JP4, XU7JP4, XU9J4, XU10JP4

Diesel: 1.4, 1.5, 1.7, 1.8, 1.9, 2.1, 2.5Codes: TUD3, TUD5 / XUD7, XUD9, XUD11 and DJ5/T, DJ5TED

Also in Fiat Ducato, Scudo and Ulysse models

GAT4388AGAT4404B

GAT4404B

FordPetrol Twin Cam (Zetec/Duratec) 16v.

Models:

Fiesta, Fusion, Courier, Escort, Focus, Puma, Mondeo, Transit Connect and Cougar (91-04)

Engines:

1.25, 1.4, 1.6, 1.7 16v. (Belt), 1.8 and 2.0 16v. (Belt and Chain)

Also in Mazda 121 1.25 16v.

3

GAT

4560

GAT

4620

ENGINE-SPECIFIC TOOLS

GAT4560

RenaultPetrol and Diesel 16v. F4/K4 + 1.5dCi

Models:

Clio/Sport, Megane/Scenic, Vel Satis, Avantime, Kangoo, Laguna and Espace (98-04)

Engines:

Petrol: 1.4, 1.6, 1.8 and 2.0 16v.Codes: K4J/K4M and F4P/F4R

Diesel: 1.5 dCi Code: K9K

Also in Nissan Micra and Kubistar (K9K) and Vauxhall Vivaro (F4R)

GAT4560GAT4620

GAT4620

Vauxhall/OpelPetrol Twin Cam EcoTec 16v. (Belt)

Models:

Corsa, Tigra, Meriva, Astra, Vectra, Zafi ra, Omega, Frontera and Sintra (95-04)

Engines:

1.4, 1.6, 1.8, 2.0 and 2.2 16v. EcoTec (Belt)Codes: X14XE, Z14XE, X16XEL, X16SEJ, X16XE1, Y16XE, Z16XE, Z16YNG, X18XE, X18E1, Y18XEL, Z18XE, Z18XEL, C20SEL, X20XEV, X22XE, Y22XE and Z22XE

Codes: X14XE, Z14XE, X16XEL, X16SEJ, X16XE1, Y16XE, Z16XE, Z16YNG,

4

GAT

4635

GAT

4630

ENGINE-SPECIFIC TOOLSGAT4630GAT4635

GAT4630

FordPetrol and Diesel Car and Car Derived Vans

Models:

Fiesta, Fusion, Escort, Focus, Puma, Sierra, Mondeo, Cougar, Transit Connect, Courier/Kombi and P100

Engines:

Petrol Twin Cams: 1.25, 1.4, 1.6, 1.7 16v. (Belt), 1.8 and 2.0 16v. (Belt and Chain) (91-04)

Diesels: 1.8D, 1.8TD (88-00), 1.8Di (Belt) (98-04), 1.8TDCi (Belt) (01-04)

GAT4635

Volkswagen GroupPetrol 1.4 and 16v. Twin Cam

Models:

Audi: A2 (00-04)Seat: Arosa, Ibiza, Cordoba, Toledo, Leon, Inca (99-04)Skoda: Fabia, Octavia (99-04) VW: Lupo, Polo/Classic, Beetle, Golf, Bora, Caddy

Engines:

1.4 and 1.6 16v. Twin Cam

Codes: AFK, AHW, AJV, AKQ, APE, AQQ, ARC, AUA, AUB, ATN, AUS, AVY, AXP, AZD, BBY, BBZ, BCA, BCB

5

GAT

4735

AG

AT47

40

ENGINE-SPECIFIC TOOLSGAT4735AGAT4740

GAT4740

Volkswagen GroupPetrol and Diesel (D/SDi/TDi)

Models:

Audi: 80, 100, A3, S3, A4, A6, TTSeat: Terra, Ibiza, Cordoba, Arosa, Leon, Inca, Toledo Altea, AlhambraSkoda: Fabia, Octavia, SuperbVolkswagen: Lupo, Polo, Caddy, Golf, Jetta, Bora, Vento, Scirroco, Corrado, Passat, Beetle, Touran, Sharan, Transporter

GAT4735A

FordDiesel 1.4 and 1.6 TDCi

Models:

Fiesta, Fusion, Focus and Focus C-Max

Engines:

Duratorq 1.4 and 1.6TDCiCode: F6JA, F6JB, F6JC, G8DA, G8DB

Citroën/PeugeotDiesel 1.4 and 1.6 HDi

Models:

Citroën: Xsara, C2, C3, C4 and C5Peugeot: 206 and 307

Engines:

1.4 and 1.6 HDi (including 16v.)Codes: DV4TD (8HW/8HX/8HZ) DV4TED4 (8HV/8HY) DV6ATED4 (9HX/9HY/9HZ)

6

ENGINE-SPECIFIC TOOLSGAT4760AGAT4820

GAT

4820

GAT

4760

A

GAT4820

PSADiesel HDi 1.4, 1.6, 2.0, 2.2

Models:

Citroën: Xsara/Picasso, C2, C3, C4, C5, C8, Xantia, Evasion/Synergie, Dispatch/Jumpy and Relay/Jumper;

Peugeot: 206, 306, 307, 406/Coupe, 407, Partner, 607, 806, 807, Expert and Boxer

Engines:

Codes: DV4, DV6, DW10, DW128HX/HW/HV/HY/HZ9HX/HY/HZRHR/RHF/RHW/RHX/RHY/RHZ4HX/HW/HY/HZ

GAT4760A

RenaultDiesel 1.5/1.9/2.2/2.5 dCi

Models:

Clio, Megane, Scenic, Laguna, Espace, Kangoo, Trafi c and Master (99-04)

Engines:

1.5, 1.9, 2.2 and 2.5 dCiCodes: K9K, F9Q, G9T, G9UAlso in Nissan Micra and Kubistar, Primastar and Interstar

Vauxhall/OpelDiesel 1.9/2.2/2.5dCi (Vans)

Models:

Vivaro and Movano (99-04)

Engines:

1.9dCi - Code: F9Q; 2.2dCi - Code: G9T; 2.5dCi - Code: G9U

7

GAT

4822

GAT

4840

ENGINE-SPECIFIC TOOLSGAT4822GAT4840GAT4910

GAT4822

PSADiesel DW8 1.9D

Models:

Citroën: Xsara, C15, Dispatch/Jumpy, BerlingoPeugeot: 206, 306, Partner, Expert

Engines:

Codes: DW8, DW8B (WJY/WJZ)

GAT4840

Volkswagen GroupDiesel Pumpe Düse (Unit Injection)

Models:

Audi: A2, A3, A4, A6; Seat: Arosa, Ibiza, Cordoba, Leon, Toledo, Alhambra,Altea; Skoda: Fabia, Octavia; Volkswagen: Lupo, Polo, Golf, Bora, Passat, Beetle, Touran, Sharan, TransporterAlso in Ford Galaxy (99-)

Engines:

Codes: AJM, AMF, ANU, ANY, ARL, ASZ, ATD, ATH, ATL, AUY, AVB, AVF, AVQ, AWX, AXB, AXC, AXR, AYZ, AZV, BAY, BHC, BJB, BKC, BKD, BKE, BJB, BLB, BLS, BLT, BMM, BMN, BNA, BNM, BNV, BPW, BPX, BRB, BRC, BRD, BRE, BRF, BRT, BRU, BTB, BVF, BVG

GAT

4910

GAT4910

Alfa RomeoPetrol Twin Spark 16v.

Models:

145, 146, 147, 155, 156, 166, Spider/GTV (95-04)

Engines:

1.4, 1.6, 1.8 and 2.0 (not 2.0JTS/1.6 105 CV)Codes: 162.01, 321.04, 322.01, 323.01, 323.10, 335.03, 341.03, 372.03, 671.06, 672.04 and 676.01

8

GAT4394

Sprocket holding tool

Used to counter-hold camshaft or injection pump sprocket during release of centre bolt to allow sprocket to freely turn on shaft during belt replacement/tensioning.

GAT4593/91010

Automatic tensioner pin set

A useful set of 6 retaining pins for holding automatic tensioner plungers in a “locked-down” position whilst replacing timing belts. Pins are spring steel, double wound for strength, covering sizes from 0.80 mm to 1.90 mm diameter.

GAT

4593

/910

10G

AT43

94UNIVERSAL TOOLS

GAT4394GAT4593/ 91010

9

UNIVERSAL TOOLSGAT4695GAT4765

GAT4695

Multi-Lock/Uni-Lock combination

A Super Set comprising:Multi-Lock, External Bridge Piece and Uni-Lock to give wide ranging sprocket locking capability on Twin Cam and Single Cam engines plus injection pump sprockets. G

AT46

95

GAT4765

Serpentine belt tool set

Set comprising a belt tensioner wrench and belt remover/installer designed to tackle the restricted working space encountered in this area of the engine compartment. The tensioner wrench is used to activate/release the spring-loaded tensioner pulley. It is long handled and incorporates a ratchet drive. Comes complete with 13, 14, 15, 16 and 18 mm sockets PLUS 3/8” and 1/2” drives. The belt remover/installer provides the reach and manoeuvrability to guide and thread the belt around the pulley system.

GAT

4765

10

UNIVERSAL TOOLS

DriveAlign® laser alignment tool (7468-00113)

This tool quickly identifi es the two most common types of misalignment in serpentine belt systems – parallel offset and angular – that reduce belt and pulley service life and produce unwanted noise. Simply position the tool within the grooves of a pulley and aim its bright laser beam at an opposite pulley. Any misalignment is instantly visible.

This exclusive Gates tool is compatible with most automotive serpentine belt drives. The lightweight and easy-to-use tool includes special laser enhancement eyeglasses for easier viewing in all light conditions.

Driv

eAlig

n®ST

T-1

Sonic belt tension tester STT-1 (7420-00301)

Proper belt installation tension is essential for optimum performance and reliability of timing belt drives. Experienced mechanics may feel they are able to check belt tension by rule of thumb, but tension results vary from one operator to another.

That is why Gates recommends using the new sonic belt tension tester STT-1: it measures belt installation tension accurately every time.

Specifi cations

• All tension values and drive characteristics are programmed in the device

• Belt frequency analysis

• Database covers all popular car models in Europe

• Reduced sensor size and high wire fl exibility

• Suitable for Gates belts only

• Easy to use

• All tension values and drive characteristics are programmed

11

Dr. Gates professional tool kit (without STT-1: 7420-00401; with STT-1: 7420-00402)

You’re a professional technician. You know that today’s sophisticated engine confi gurations require that you use specialised tools in your service area. To help you fi nd the problem, fi x the problem quickly and do the job right – the fi rst time – Gates now offers a useful kit with professional tools for belt drive systems, called Dr. Gates.

Dr. Gates is a professional tool kit including the sonic tension tester STT-1, the DriveAlign® laser alignment tool, two sprocket locking devices, a stethoscope and a belt tensioner retaining pin set, all arranged in one practical case. Next to these tools, the kit also includes a practical headlamp and a white marker, which comes in easy when you need to make indications on a belt. The complete kit has been developed to facilitate belt maintenance for the mechanic.

UNIVERSAL TOOLS

Dr. G

ates

Key benefi ts

• High-grade tools for professional use• State-of-the-art technology• Detailed handling instructions included• All tools needed to service the belt drive on a specifi c engine platform

Choosing the right partner for belt drive maintenance is easy when you choose Gates.

Your distributor:

The manufacturers reserve the right to amend details where necessary. © Gates Corporation 2007 Printed in Belgium - 09/07.