profibus and profinet update - mark freeman of siemens a&d

Profibus & Profinet in Factory Automation Event, Coventry 21st August 2013

Profibus & Profinet UK User Group

Profibus & Profinet in Factory Automation

2

PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

Welcome

House keeping points – Visits, Phones & Fires.

Visits – Toilets are through the doors and on the left

Phones – Please switch off or set to Silent

Fires – If alarm sounds, follow presenters, down to the reception and out towards the main car park.



Agenda3

09.00 Coffee and Registration09:30 Introduction to the Manufacturing Technology Centre09.45 Profibus & Profinet Update. - Mark Freeman09.55 Practical steps for a successful Profibus project. - Xiu Ji10.35 Introduction to Profinet. - Derek Lane11.15 Coffee11.35 Safety & Security on PROFINET & Profibus networks. -

Peter Brown12.15 PROFIBUS Health checking and monitoring - Live demonstration.

Andy Verwer/Dale Fittes12.55 Lunch13.35 Features & Benefits of Profinet networks - Live demonstration. -

Dave Walker/Andy Williams14.15 PROFINET Frame Analysis. Demonstration showing the use of

WireShark to look at PROFINET frames. - Peter Thomas14.55 Summary/Questions15.00 Close followed by (optional) tour of the MTC workshops




4Two technologies in one organisation

Regional PI Associations

PI Competence Centers

PI Test Laboratories

PI Training Centers

PI (PROFIBUS & PROFINET International)

Technologies

Fieldbus based Automation Technology

Ethernet based Automation Technology

Proxy Technology




5

Australia/New ZealandRPA, PICC, PITC

PI worldwide support

PolandRPA, PICC

RussiaRPA

SlovakiaRPA

Southern AfricaRPA, PICC, PITC

ChinaRPA, PICC, PITL

JapanRPA, PICC, PITL

KoreaRPA, PICC

South-East-AsiaRPA, PICC

Middle-EastRPA

IndiaRPA, PICC

Czech Rep.RPA, PICC, PITL

BrazilRPA, PICC

USARPA, PICC, PITC, PITL

ChilePICC

DenmarkRPA

FinlandRPA

UKRPA, PICC, PITC

IrelandRPA, PICC, PITC

NetherlandsRPA, PICC,PITC, PITL

NorwayRPA, PICC, PITC

SwitzerlandRPA, PICC, PITC

Germany & AustriaRPA, PICCPITC, PITL

FranceRPA, PICC, PITC

BelgiumRPA, PICC

ItalyRPA, PICC

SwedenRPA, PICC

SpainRPA, PICC

27 Regional PI Associations (RPA)50 PI Competence Centers (PICC)

18 PI Training Centers (PITC)10 PI Test Laboratories (PITL)

PI worldwide: PI Technical Support:


66PROFIBUS Nodes


77PROFIBUS Nodes in PA


88PROFINET Nodes

World Market for Industrial Ethernet and Fieldbus Technologies 2013


http://www.profibus.com/typo3temp/pics/401c4cca1a.jpg



9

Use of the PROFIsafe profileTested and accepted with PROFIBUS & PROFINETStandard and failsafe communications over the same transmission pathMeets the highest safety categories, SIL level 3 / PL e / Cat. 4First communications standard developed in accordance with safety standard IEC 61508. Developed to IEC 61784-3-3, PROFIsafe is the international standard

Even wireless…Failsafe and available,just like hard-wired!

“Black

chan

ne

l"

Standard data

Safety-relateddata

PROFIsafeLayer

StandardBUS protocol

Standarddata

Safety-relateddata

PROFIsafeLayer

StandardBUS protocol

PROFINET

IndustrialEthernet

Access Point

Client

RCoax RCoax

IO-Device

Mobile Panel

Access Point

PROFINET

IndustrialEthernet

Failsafe communications – even wireless


1010PROFIsafe Nodes

World Market for Industrial Ethernet and Fieldbus Technologies 2013


http://www.profibus.com/typo3temp/pics/59668a7a88.jpg

1111Training for network members

Training is available in a range of areas to upgrade your skills including:

Certified PROFIBUS Engineer – combining installation, commissioning and engineering

PROFIBUS System Design Course

Certified PROFINET Engineer – combining installation, commissioning and engineering

PROFINET Developer Course

Training can be undertaken at the PROFIBUS International Competence Centre in Manchester, on your company premises or at an off-site location of your choice


1212Training for network members

PROFIBUS and PROFINET training is offered through:

PROFIBUS International Competence Centre - Manchester Metropolitan University in Manchesteror a location of your choice (http://www.sci-eng.mmu.ac.uk/ascent/)

PROFIBUS on-site training is offered through:

PROFIBUS International Training Centre - Verwer Training & Consultancy Ltd (http://verwertraining.com/)

Our training partners


13Web Based Training




14PROFIBUS & PROFINET on the Web

www.profibus.com www.profinet.com

www.profibus.co.uk




Agenda15

09.00 Coffee and Registration09:30 Introduction to the Manufacturing Technology Centre09.45 Profibus & Profinet Update. - Mark Freeman09.55 Practical steps for a successful Profibus project. - Xiu Ji10.35 Introduction to Profinet. - Derek Lane11.15 Coffee11.35 Safety & Security on PROFINET & Profibus networks. -

Peter Brown12.15 PROFIBUS Health checking and monitoring - Live demonstration.

Andy Verwer/Dale Fittes12.55 Lunch13.35 Features & Benefits of Profinet networks - Live demonstration. -

Dave Walker/Andy Williams14.15 PROFINET Frame Analysis. Demonstration showing the use of

WireShark to look at PROFINET frames. - Peter Thomas14.55 Summary/Questions15.00 Close followed by (optional) tour of the MTC workshops
