profiles tile adhesives grouting material …

PROFILES TILE ADHESIVES GROUTING MATERIAL WATERPROOFING RAISED FLOORS

This catalogue is protected under the Spanish Intellectual Property Act (Royal Decree 1/1996).Any reproduction of its contents, In whole or in part, without the express consent of PORCELANOSA Grupo

will be subject to punitive action under the Spanish Criminal Code.

Decorative and technical pro�lesTile installation adhesivesGrouting material and elastic joint sealantsSubstrate preparation productsWaterproo�ngRaised �oors

Index6

56648498

108

Pro�lesDecorative pro�lesElegance collectionGold collectionMetal collectionChrome collectionWood collectionpro-telo collection

Corner pro�les and trims for wall tilespro-mate 2pro-mate 3pro-mate 5pro-part Lipro-partpro-mate 45pro-cornerXLIGHT pro�les

Technical pro�lespro-Tpro-levelpro-dilataExpansion jointspro-steppro-�expro-sanitpro-plintpro-skirting

122426283031

3435363738404243

464748495051525354

Graphic index

Decorative pro�les

Corner pro�les and trims for wall tiles

Elegance collection

Wood collection

pro-mate 2

pro-part Li

pro-mate 5

Gold collection

pro-telo collection

pro-mate 3

pro-mate 45pro-part

Chrome collection

pro-corner

Page 12

Page 30

Page 34

Page 37

Page 36

Page 24

Page 31

Page 35

Page 40Page 38

Page 28

Page 42

Technical pro�les

Structural joints pro-�ex

pro-T

pro-step

pro-sanit

pro-level

pro-plint pro-skirting

pro-dilata

Page 49 1

Page 46

Page 50

Page 52

Page 47

Page 53 Page 54

Page 48Metal collectionPage 26

Decorative profiles

12 13

pro-part Li Chrome SW 1500

pro-part Li Chromed brass SW 1500 11 mm 7/16”11x11x2500 mm

pro-part Li latón cromado SW 1500

B71342597 100120372

Chromed brass pro�le. Made with Swarovski Elements

pro-part Li Gold SW 1500

pro-part Li Gold SW 1500 11 mm 7/16”11x11x2500 mm

B73141324 100130432

Chromed brass pro�le with a 24k gold bath. Made with Swarovski elements

High-end decorative pro�le for ceramic wall tiling, made with Swarovski Elements.Replaces the traditional decorative ceramic listellos by new design metallic lines.

Elegance collection

14 15

pro-part Li Crystal rock SW Silver

pro-part Li Crystal rock SW Silver 11 mm 7/16”11x11x2500 mm

B73141325 100130429


pro-part Li Crystal rock SW Graphite

pro-part Li Crystal rock SW Graphite 11 mm 7/16”11x11x2500 mm

B73141326 100130428

Brass pro�le with dark metallic �nish. Made with Swarovski Elements

High-end decorative pro�le for ceramic wall tiling, made with Swarovski crystals.Replaces the traditional decorative ceramic listellos by new design metallic lines.

Elegance collection

pro-part Li Crystal rock SW Silver

16 17

pro-part Li Crystal sand SW Gold

pro-part Li Crystal sand SW Gold 11 mm 7/16”11x11x2500 mm

B73141323 100130430

24 k gold plated brass. Made with Swarovski Elements

pro-part Li Crystal sand SW Silver

pro-part Li Crystal sand SW Silver 11 mm 7/16”11x11x2500 mm

B73141322 100130431



Elegance collection

pro-part Li Crystal sand SW Silver

18 19

pro-mate 5 Gold SW 500

pro-mate 5 Gold SW 500 11 mm 7/16”5x11x2500 mm

B71342585 100104649

24 k gold plated brass. Made with Swarovski elements


pro-mate 5 Gold SW 168 11 mm 7/16”5x11x2500 mm

B71342587 100109076

24 k gold plated brass. Made with Swarovski Elements


Elegance collection


20 21

pro-mate 5 Chrome SW 500

pro-mate 5 Chromed brass SW 500 11 mm 7/16”5x11x2500 mm

B71342584 100104650



pro-mate 5 Chromed brass SW 168 11 mm 7/16”5x11x2500 mm

B71342586 100109077



Elegance collection


22 23

pro-mate 5 chrome SW glass

pro-mate 5 Chromed brass SW glass 11 mm 7/16”5x11x2500 mm

B71342603 100120358

Chromed brass pro�le. Made with Swarovski elements


Elegance collection

pro-mate 5 Chrome SW glass

24Pro�le length: 2500 mm - 8 feet long

High-end decorative pro�le for wall tiles, 24K gold plated.

It substitutes the traditional ceramic frieze by a metallic line with an exclusive design.

Gold collection

Wall tileWall tile

pro-mate 5

KEA SAP h (mm) h (inches)B71342573 100100722 12.5 1/2B71342572 100100721 11 7/16



24K Gold

h

5 mm - 13/64”

pro-mate 5

pro-part pro-parth

8 mm - 5/16”

24K Gold

pro-part Li24K Gold

pro-part Li h

h

Please note exact measurements are in mm and imperial measurements are approximative


26

ocean moon graphite

oxyde line

27

pro-mate 5

KEA SAP h (mm) h (inches)B71342595 100120370 11 7/16






KEA SAP h (mm) h (inches)B71342593 100120367 mate 11 7/16

ocean

moon

graphite

graphite

oxyde

oxyde

line

h

5 mm

pro-mate 5

pro-part pro-parth

8 mm

Pro�le length: 2500 mm - 8 feet long

Metallic �nish decorative pro�les for ceramic wall tiles. It substitutes the traditional ceramic frieze. Available in five finishes, they represent an excellent complement for stone or metal-inspired wall tiles. Suitable for corner trims.

Metal collection

Wall tileWall tile



28



Chromed brass decorative pro�le for wall tiles. It substitutes the traditional decorative ceramic frieze. Typical LIFESTYLE by PROCELANOSA pro�le.

Suitable for trimming corners and transitions between ceramic tiles.

Chrome collection

Floor and wall tileFloor and wall tile

pro-mate 3

Chromed brass

h

3 mm - 1/8”

pro-mate 3

pro-mate 5Chromed brass

h

5 mm - 13/64”

pro-mate 5

pro-telo mosaicChromed brass

pro-telo mosaic h

pro-partChromed brass

pro-parth

8 mm - 5/16”

Chromed brass corner

pro-part LiChromed brass

pro-part Li h

h


25 - 63/64”

KEA SAP h (mm) h (inches)B71342608 100126772 XLIGHT 6 1/4B71133001 100004951 8 5/16B71133002 100004952 9 23/64B71133003 100004953 10 25/64B71133004 100004954 12.5 1/2

KEA SAP h (mm) h (inches)B71342611 100126779 XLIGHT 7 9/32B71132003 100004945 9 23/64B71132004 100004946 11 7/16B71134004 100004955 12.5 1/2

KEA SAP h (mm) h (inches)B73134001 100005368 XLIGHT 7 9/32B73134002 100005369 9 23/64B71342552 100088905 10 25/64B73134003 100005370 11 7/16B73141319 100097895 Porcelanosa 11 7/16B73134004 100005371 Shade 1 12.5 1/2B73141312 100033129 Shade 2 12.5 1/2B73134005 100005372 15 19/32

KEA SAP h (mm) h (inches)B73134301 100005373 XLIGHT 7 9/32B73134302 100005374 9 23/64B71342554 100091065 10 25/64B73134303 100005375 11 7/16B73134304 100005376 12.5 1/2B71342541 100067718 15 19/32

KEA SAP h (mm) h (inches)B72141343 100098464 11 7/16B71342550 100085153 12.5 1/2

KEA SAP h (mm) h (inches)B72141345 100099966 Mosaic 25 4 5/32B72141355 100104654 Mosaic Porcelanosa 4 5/32

KEA SAP h (mm) h (inches)B71342618 100126780 XLIGHT 4,5 3/16B71342542 100070170 11 7/16B71342543 100070171 12.5 1/2B71342545 100073492 15 19/32

pro-partcorner

pro-part Licorner


30 31


Pro�le length: 2500 mm - 8 feet longpro-step W pro�les are supplied untreated so that the �nal user can choose the �nishing of the step.Do not use pro-telo W pro�les in coverings which come into direct contact with water.

Wood profiles for wall and floor tile coverings. Excellent solution for the design of ceramic settings with either contemporary or traditional style.

Available as a decorative line for ceramic wall tiles and as special pieces for steps.

pro-telo W

Wood collection

Floor and wall tileStep

pro-telo Wh

KEA SAP h (mm) h (inches)B72141306 100032362 Mahogany 15 12.5 1/2B72141309 100032360 Wenge 15 12.5 1/2B72141314 100032364 Walnut 15 12.5 1/2

pro-telo W 15 chromed brass

KEA SAP h (mm) h (inches)B72141305 100032363 Mahogany 25 12.5 1/2B72141312 100032361 Wenge 25 12.5 1/2B72141310 100032365 Walnut 25 12.5 1/2

pro-telo W 25 chromed brass

pro-telo carbono


pro-telo 11x30 carbono

pro-telo Carbonoh

pro-step W

KEA SAP h (mm) h (inches)B76211001 100005498 Avignon 10 25/64

pro-step W

h

W Avignon

50 mm - 2”

pro-step W

KEA SAP h (mm) h (inches)B76211006 100005503 Milano 12.5 1/2B76211005 100005502 Monaco 12.5 1/2

pro-step W

W Monaco

h

50 mm - 2”30

.5 m

m · 1

1/4 ”

W Milano

h

50 mm - 2”


Pro�le length: 2500 mm - 8 feet long pro-telo titanium pro�le length: 2400 mm - 7 feet long

Metal decorative pro�le for ceramic wall tiles. Flangeless metallic line for tiles of any thickness.

Available in a wide variety of materials, finishes and dimensions, they represent an excellent solution for the design of contemporary style ceramic settings.

pro-telo stainless steel 8x40

pro-telo collection

Wall tileFloor and wall tile

KEA SAP h (mm) h (inches)B72141110 100005299 Gloss 8 5/16B72141210 100005306 Brushed 8 5/16

Stainless Steel 8x40

pro-telo aluminum

KEA SAP h (mm) h (inches)B72122001 100005285 Gold 10 25/64B72122002 100005286 Silver 10 25/64

Aluminum 8x10 anodized

KEA SAP h (mm) h (inches)B72124001 100005288 Gold 10 25/64B72124002 100005289 Silver 10 25/64

Aluminum 8x10 gloss

pro-telo Aluminum h

pro-telo recto

KEA SAP h (mm) h (inches)B72141318 100084015 High gloss 8 5/16B72141348 100100729 Silver anodized 8 5/16B72141346 100100730 Titanium 8 5/16B72141350 100100727 Cosmos 8 5/16

Aluminum 8x10

pro-telo Recto h


KEA SAP h (mm) h (inches)B72141101 100005293 Gloss 8 5/16B72141201 100005300 Brushed 8 5/16

B72141356 100104652 Berlin 8 5/16B72141320 100089391 Squared chrome 8 5/16


pro-telo 8x25 h

pro-telo 8x40 h


KEA SAP h (mm) h (inches)B72141005 100005291 Matt URBATEK 8 5/16B72141006 100005292 Gloss URBATEK 8 5/16


pro-telo 8x10 h

30.5

mm

· 11/

4 ”30

.5 m

m · 1

1/4 ”

Please note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximative

Corner profiles and trims for wall tiles

34 35

Right angle, stainless steel pro�le for corners and wall and �oor tile coverings.

Right angle, stainless steel profiles for trimming the non-glazed edge of the tile. Suitable for separating tiles in walls as well as in �oors.

pro-mate 2

pro-mate 2


Floor and wall tileWall tile corner


h

2 mm - 5/64”

pro-mate 2

KEA SAP h (mm) h (inches)B71342617 100126769 XLIGHT 6 1/4B71141001 100004956 8 5/16B71141002 100004957 10 25/64B71141003 100004958 12.5 1/2B71141004 100004959 15 19/32B71141005 100004960 20 25/32

V2A stainless steel

KEA SAP h (mm) h (inches)B71142001 100004966 8 5/16B71142002 100004967 10 25/64B71142003 100004968 12.5 1/2B71142004 100004969 15 19/32B71142005 100004970 20 25/32

Gloss stainless steel

KEA SAP h (mm) h (inches)B71141008 100004963 8 5/16B71141009 100004964 10 25/64B71141010 100004965 12.5 1/2

V4A Stainless steel

Right angle pro�le for corners and wall and �oor tile coverings. Decorative use as a line.

Right angle, 3 mm thick pro�les for trimming the non-glazed edge of the tile. Available in a wide variety of materials, they are also suitable for separating wall tiles.

pro-mate 3

pro-mate 3




KEA SAP h (mm) h (inches)B71111009 100004865 White 10 25/64B71111017 100004873 White 12.5 1/2B71111010 100004866 Jazmín 10 25/64B71111018 100004874 Jazmín 12.5 1/2B71111011 100004867 Beige 10 25/64B71111019 100004875 Beige 12.5 1/2B71111012 100004868 Black 10 25/64B71111020 100004876 Black 12.5 1/2B71111013 100004869 Gray 10 25/64B71111021 100004877 Gray 12.5 1/2B71111014 100004870 Ivory 10 25/64B71111022 100004878 Ivory 12.5 1/2

PVC

KEA SAP h (mm) h (inches)B71123001 100004909 White 8 5/16B71123003 100004911 White 10 25/64B71123004 100004912 White 12.5 1/2B71123005 100004913 Beige 8 5/16B71123007 100004915 Beige 10 25/64B71123008 100004916 Beige 12.5 1/2B71123009 100004917 Black 8 5/16B71123011 100004919 Black 10 25/64B71123012 100004920 Black 12.5 1/2

Lacquered aluminum


Anodized aluminum silver


Anodized aluminum gloss silver


Gloss polished brass

KEA SAP h (mm) h (inches)B71122006 100004904 8 5/16B71122007 100004905 9 23/64B71122008 100004906 10 25/64B71122009 100004907 12.5 1/2B71122010 100004908 15 19/32

Anodized aluminum gold

KEA SAP h (mm) h (inches)B71342608 100126772 XLIGHT 6 1/4B71133001 100004951 8 5/16B71133002 100004952 9 23/64B71133003 100004953 10 25/64B71133004 100004954 12.5 1/2

Chromed brass

h

3 mm - 1/8”

pro-mate 3


36 37

Right angle pro�le for corners and wall and �oor tile coverings. Decorative use as a line.

Right angle and 5 mm - 13/64” edge pro�les for trimming the non-glazed edge of the tile. Suitable for transitions between �oor coverings at the same level.

pro-mate 5

pro-mate 5









Chromed brass

h

5 mm - 13/64”

pro-mate 5



Decorative pro�le for ceramic wall tiles. Suitable for trimming corners and transitions between ceramic tiles.

Right angle, corner shaped profiles, with both sides of the same length. Specially recommended for recti�ed tiles corners and for tiles with relief decoration.

pro-part Li

pro-part Li


KEA SAP h (mm) h (inches)B71342618 100126780 XLIGHT 4.5 3/16B71342542 100070170 11 7/16B71342543 100070171 12.5 1/2B71342545 100073492 15 19/32

Chromed brassKEA SAP h (mm) h (inches)B72141343 100098464 11 7/16B71342550 100085153 12.5 1/2



Anodized aluminum silver corner


Anodized aluminum gloss silver corner

KEA SAP h (mm) h (inches)B71342619 100128227 XLIGHT 4.5 3/16B71342539 100062074 11 7/16B71342537 100062086 12.5 1/2




pro-part Li h

h

pro-part Licorner


38 39Pro�le length: 2500 mm - 8 feet long



Decorative pro�le for ceramic wall tiles. Suitable for trimming corners and transitions between ceramic tiles.

Right angle, corner shaped pro�les, with an 8 mm - 5/16” edge and a variable width edge. Excellent solution for a wide variety of ceramic installations.

pro-part

pro-part





Stainless steel

KEA SAP h (mm) h (inches)B73122001 100005322 XLIGHT 7 9/32B73122002 100005323 9 23/64B73122003 100005324 11 7/16B73122004 100005325 12.5 1/2B73122005 100005326 15 19/32B73122006 100005327 20 25/32B73122007 100005328 25 63/64


KEA SAP h (mm) h (inches)B73122009 100005330 9 23/64B73122010 100005331 11 7/16B73122011 100005332 12.5 1/2B73122014 100005335 25 63/64


KEA SAP h (mm) h (inches)B73134001 100005368 XLIGHT 7 9/32B73134002 100005369 9 23/64B71342552 100088905 10 25/64B73134003 100005370 11 7/16B73134004 100005371 Shade 1 12.5 1/2B73141312 100033129 Shade 2 12.5 1/2B73134005 100005372 15 19/32

B73141319 100097895 Porcelanosa 11 7/16

Chromed brass


Anodized aluminum silver corner




Stainless steel corner

pro-part stainless steelh

8 mm - 5/16”

pro-parth

8 mm - 5/16”



pro-part


Gloss polished brassKEA SAP h (mm) h (inches)B71342551 100088551 Black 11 7/16B71342547 100080530 Black 12.5 1/2

B71342576 100100723 White 11 7/16B71342549 100083438 White 12.5 1/2

Lacquered aluminum

pro-parth

8 mm - 5/16”

pro-partcorner


40 41Pro�le length: 2500 mm - 8 feet long

Rounded pro�le for protecting wall tiles corners.

These profiles are the classic solution for protecting corners in wall tile coverings. Available in a wide variety of materials, its main feature is being shock-resistant.

pro-mate 45 TOP

pro-mate 45 stainless steel

pro-mate 45 aluminum

pro-mate 45


Wall tile cornerWall tile corner

KEA SAP h (mm) h (inches)B71342571 100100666 12.5 1/2

Anodized aluminum gloss gold



hpro-mate 45 closed


Anodized aluminum silverKEA SAP h (mm) h (inches)B71322002 100005093 8 5/16B71322004 100005095 10 25/64B71322006 100005097 12.5 1/2



V2A stainless steel






Gloss stainless steel corner


Anodized aluminum gloss silver corner

hpro-mate 45 top

hpro-mate 45 open

pro-mate 45 PVC gloss

pro-mate 45 PVC matt


KEA SAP h (mm) h (inches)B71211007 100004979 White 10 25/64B71211025 100004993 White 12.5 1/2B71211026 100004994 Jazmín 12.5 1/2B71211008 100004980 Ivory 10 25/64B71211026 100004994 Jazmín 12.5 1/2B71211009 100004981 Beige 10 25/64B71211027 100004995 Beige 12.5 1/2B71211010 100004982 Gray 10 25/64B71211028 100004996 Gray 12.5 1/2

PVC

KEA SAP h (mm) h (inches)B71311010 100005084 White 10 25/64B71311011 100005085 Jazmín 10 25/64B71311014 100005088 Ivory 10 25/64

PVC Closed

KEA SAP h (mm) h (inches)B71211325 100005027 White blister 12.5 1/2B71211317 100005023 Jazmín blister 10 25/64B71211326 100005028 Jazmín blister 12.5 1/2B71211308 100005014 Ivory blister 10 25/64B71211326 100005028 Jazmín blister 12.5 1/2B71211309 100005015 Beige blister 10 25/64B71211327 100005029 Beige blister 12.5 1/2B71211310 100005016 Gray blister 10 25/64B71211328 100005030 Gray blister 12.5 1/2

PVC corner

hpro-mate 45 gloss

pro-mate 45 PVC II

KEA SAP h (mm) h (inches)B71342512 100046964 White 10 25/64B71342510 100047009 White 12.5 1/2B71342514 100047012 Gray 10 25/64B71342513 100047010 Gray 12.5 1/2B71342515 100047013 Ivory 10 25/64B71342511 100047008 Ivory 12.5 1/2

PVC IIKEA SAP h (mm) h (inches)B71342526 100048306 White 10 25/64B71342531 100048566 White 12.5 1/2B71342527 100048304 Gray 10 25/64B71342522 100048569 Gray 12.5 1/2B71342524 100048303 Ivory 10 25/64B71342529 100048565 Ivory 12.5 1/2

PVC II corner

KEA SAP h mm h (inches)B71342610 100126773 White XLIGHT 6 1/4B71323005 100005113 White 10 25/64B71323009 100005117 White 12.5 1/2B71323006 100005114 Beige 10 25/64B71323010 100005118 Beige 12.5 1/2B71323007 100005115 Pergamon 10 25/64B71323011 100005119 Pergamon 12.5 1/2

Lacquered aluminumKEA SAP h mm h (inches)B71323505 100005142 White 10 25/64B71323516 100005147 Beige 12.5 1/2B71323507 100005144 Pergamon 10 25/64B71323517 100005148 Pergamon 12.5 1/2

Lacquered aluminum corner

pro-mate 45 aluminumh

pro-mate 45 closed

hpro-mate 45 matt

hpro-mate 45 II

Pro�le length: 2500 mm - 8 feet longPlease note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximative

KEA SAP h (mm) h (inches)B71342614 100126778 TOP XLIGHT 6 1/4B71342565 100099965 TOP 10 25/64B71342620 100128801 TOP 12.5 1/2

Chromed brass

KEA SAP h (mm) h (inches)B71342612 100126777 TOP XLIGHT 6 1/4

Anodized aluminium silver

pro-mate 45 brass

KEA SAP h (mm) h (inches)B71342615 100126776 XLIGHT 6 1/4B71342566 100099963 10 25/64B71342567 100099964 12.5 1/2

Chromed brassKEA SAP h (mm) h (inches)B71332003 100005155 12.5 1/2


hpro-mate 45

KEA SAP h (mm) P/EUB71342606 100125537 10 29,95 p/u


42 43

Wall tileWall tile corner

pro-mate 3h

3 mm

pro-mate 3

KEA SAP h (mm) h (inches)B71342608 100126772 chromed 6 1/4B71342616 100126770 silver anodized 6 1/4B71342609 100126771 white lacquered 6 1/4

pro-part pro-parth

8 mm

KEA SAP h (mm) h (inches)B73134001 100005368 chromed 7 9/32B73122001 100005322 silver anodized 7 9/32

pro-part Li pro-part Li h

a

KEA SAP h (mm) h (inches)B71342618 100126780 chromed 4.5 3/16B71342619 100128227 silver anodized 4.5 3/16

pro-mate 2h

2 mm

pro-mate 2

KEA SAP h (mm) h (inches)B71342617 100126769 stainless steel V2A 6 1/4

pro-mate 5h

5 mm

pro-mate 5

KEA SAP h (mm) h (inches)B71342611 100126779 XLIGHT 7 9/32

pro-mate 45 TOPKEA SAP h (mm) h (inches)B71342614 100126778 chromed 6 1/4B71342612 100126777 silver anodized 6 1/4

hpro-mate 45 top

pro-mate 45KEA SAP h (mm) h (inches)B71342615 100126776 chromed 6 1/4B71342607 100126774 silver anodized 6 1/4B71342610 100126773 white lacquered 6 1/4B71342613 100126775 stainless steel V2A 6 1/4

hpro-mate 45 V2A

hpro-mate 45 cerrado

Metallic pro�le for protecting corners.

Right angle, metallic pro�les for protecting corners. Most of the pro-corner models are installed after the tile, which implies a small lip over the tile surface.

pro-corner E

pro-corner mosaic

pro-corner R

pro-corner aluminum

pro-corner


Wall tile cornerWall tile corner

Pro�le length: 2500 mm - 8 feet longPro�le length: 3000 mm - 9 feet long

Pro�le length: 2500 mm - 8 feet longPro�le length: 2500 mm - 8 feet long

Pro�le length: 2700 mm - 8 feet 1019/64 ” long


KEA SAP h (mm) h (inches)B78122001 100005584 25 63/64B78122003 100005586 25 63/64

pro-corner BKEA SAP h (mm) h (inches)B78122005 100005588 20 25/32B78122006 100005589 25 63/64B78122008 100005591 40 11/2

pro-corner angled

KEA SAP axb mm h (mm) h (inches)B78141004 100005600 8x7 8 5/16B78141005 100005601 10x9 10 25/64B78141006 100005602 12x10 12 1/2

Stainless steel

KEA SAP h (mm) h (inches)B78141122 100092530 gloss silver 4.4 11/64B78141123 100092529 silver 4.4 11/64

Anodized aluminum


Stainless steel


B78141114 100005625 40 11/2

Gloss stainless steelKEA SAP h (mm) h (inches)B78141117 100005628 25 63/64B78141118 100005629 30 11/4

Brushed stainless steel

h

h

pro-corner B

ab

pro-corner E

h

h

pro-corner R

4.4 mm · 11/64

pro-corner mosaic

pro-corner angled

h

h


Corner pro�les for wall tiles less than 6 mm thick. Specially recommended for mosaics and large format and thin ceramic slabs, such as XLIGHT. Available in di�erent shapes, from right-angled pro�les for straight trims to rounded shape pro�les. Decorative use.

XLIGHT pro�les


Pro�le length: 2500 mm - 8 feet long Please note exact measurements are in mm and imperial measurements are approximative

Technical profiles

46 47

Technical pro�les for �oor tiles and steps


Pro�le for transitions between �oor coverings.

Pro�les for transitions between tiles or slabs with slightly di�erent heights. Available in two widths: 14 mm - 35/64” and 25 mm - 63/64”Specially recommended for transitions between ceramic tiles and wooden �oors.

pro-T

pro-T

Floor tile




Chromed brassKEA SAP h (mm) h (inches)B75132001 100005458 14 35/64B75132002 100005459 25 63/64



Brushed stainless steelKEA SAP h (mm) h (inches)B75141003 100005462 14 35/64B75141004 100005463 25 63/64


Brass andaluminum

7 mm - 9/32”

h

Stainlesssteel

7 mm - 9/32”

h



Transition pro�le between �oor coverings at di�erent levels. It covers the non-glazed edge of the tile and protects it from shocks.

Technical profiles for small height differences between floor coverings. Available in rounded �nish and sloped �nish. Specially recommended for high transit �oors.

pro-level C

pro-level R

pro-level

Floor tileFloor tile

pro-level Ch





KEA SAP h (mm) h (inches)B74122004 100005428 11 7/16B74122005 100005429 12.5 1/2B74122006 100005430 15 19/32B74122007 100005431 20 25/32


pro-level Rh


pro-level M


Anodized aluminium

pro-level Mh

48 49



Pro�le for movement joints in ceramic �oor coverings.

PVC or metal pro�les with a central elastic joint for the absorption of tensions in the ceramic �oor. Available in several colours and joint widths, they are the best solution for creating intermediate movement joints.

pro-dilata PVC

pro-dilata metal

pro-dilata

Floor tile

KEA SAP h (mm) h (inches)B79211037 100005673 Gray 8 5/16B79211041 100005674 Gray 10 25/64B79211045 100005675 Gray 12.5 1/2

CFC 8 mm

KEA SAP h (mm) h (inches)B79211067 100005694 Gray 10 25/64B79211068 100005695 Gray 12.5 1/2

CFL 5 mmKEA SAP h (mm) h (inches)B79211058 100005685 White 12.5 1/2B79211055 100005682 Beige 10 25/64B79211059 100005686 Beige 12.5 1/2B79211063 100005690 Beige 15 19/32B79211056 100005683 Black 10 25/64B79211060 100005687 Black 12.5 1/2B79211064 100005691 Black 15 19/32B79211057 100005684 Gray 10 25/64B79211061 100005688 Gray 12.5 1/2B79211065 100005692 Gray 15 19/32

CFL 8 mm

KEA SAP h (mm) h (inches)B79221071 100005699 12.5 1/2B79221072 100005700 15 19/32B79221074 100005702 20 25/32

CFM 10 mm aluminum


CFM 8 mm stainless steel

CFCCFL

5-8 mm · 13/64” - 5/16”

CFM stainless steel

10 mm - 25/64”

CFM aluminum

8 mm - 5/16”


BT pro�le length: 3000 mm - 13 feet longAT pro�le length: 3000 mm - 13 feet long

Pro�le for structural joints in ceramic �oor coverings.

Metallic pro�les with a central elastic joint that absorbs the structural movements of the support. Available with deformable polypropylene joint for pedestrian transit and moving metallic joint for wheeled transit.

structural joints BT

structural joints AT

Structural joints

Floor tileFloor tile

KEA SAP h (mm) h (inches)B79241098 100044392 gray 18 45/64B79241099 100044393 gray 40 11/2

B80106001 100005730 black 18 45/64B80106003 100005732 black 40 11/2

BT-40


B80106002 100005731 50 2

AT-75

structural joint BT h

h

40 mm - 11/2”

75 mm - 3”

structural joint AT

8 mm - 5/16”

Please note exact measurements are in mm and imperial measurements are approximative Please note exact measurements are in mm and imperial measurements are approximativeCK pro�le length: 3000 mm - 13 feet long

pro-dilata CK

Corner pro-dilata CK

KEA SAP A (mm) h (inches)B79241126 100140444 50 2B79241122 100140445 60 2 23/64

B79241123 100140446 70 2 3/4

KEA SAP A (mm) h (inches)B79241128 100140448 50 2B79241131 100140449 60 2 23/64

B79241129 100140450 70 2 3/4

CK Anodized aluminium

CK Anodized aluminium

A mm

A mm

50 51



Pro�le for the making of stair steps. It substitutes the traditional step ceramic piece by a combination of ceramic tile and pro�le.

Metallic pro�les that cover the non-glazed edge of the tile, protect it from shocks and reduce the risk of slipping.

pro-step

pro-step

pro-step

StepStep

KEA SAP h (mm) h (inches)B76322001 100005507 7 9/32B76322002 100005508 9 23/64B76322003 100005509 11 7/16B76342003 100067688 13.5 17/32

Anodized aluminum silver M1

KEA SAP h (mm) h (inches)B76111026 100005493 White 11 7/16B76111027 100005494 Beige 11 7/16B76111028 100005495 Black 11 7/16B76111030 100005497 Gray 11 7/16

PVC 25

KEA SAP h (mm) h (inches)B76111011 100005478 White 11 7/16B76111013 100005480 Black 11 7/16B76111014 100005481 marrón 11 7/16B76111015 100005482 Gray 11 7/16

PVC 35


Stainless steel M2


Chromed brass M1


Gloss stainless steel M2

pro-step M1 h pro-step M2 h

Technical pro�les


Flexible pro�les for curve lines in �oors.

Flexible pro�les are available for installation in �oor and wall tiles that form curves. They can be shaped with the pro-curver machine.

pro-�ex

pro-�ex

pro-part �expro-mate 2 �ex


pro-level C gloss polished brass


pro-part gloss polished brass


pro-part anodized aluminum silverKEA SAP h (mm) h (inches)B73222010 100005399 11 7/16B73222011 100005400 12.5 1/2

pro-part anodized aluminum gold


pro-mate 45 anodized aluminum silverKEA SAP h (mm) h (inches)B71422107 100005195 10 25/64B71422112 100005200 12.5 1/2

pro-mate 45 anodized aluminum gold


pro-mate 2 stainless steel V2AKEA SAP h (mm) h (inches)B71442001 100005225 8 5/16B71442002 100005226 10 25/64

pro-mate 2 stainless steel gloss V2A

KEA SAP h (mm) h (inches)B71422001 100005179 8 5/16B71422002 100005180 9 23/64B71422003 100005181 10 25/64B71422004 100005182 12.5 1/2B71422005 100005183 15 19/32

pro-mate 3 anodized aluminum silver

h

3 mm - 1/8”

pro-mate 3 pro-parth

8 mm - 5/16”

hpro-mate 45 abierto

hpro-mate 45 cerrado

pro-step PVC 25 / 35

h

25 - 35 mm · 63/64 “ - 13/16”


52 53

Technical pro�les


pro-plint R consists of a base and a top pro�le.

Includes right and left caps.

Metallic skirting for �oor tile coverings.

Metallic pro�les for skirtings. They have a high mechanical resistance with a functional, modern design. Specially recommended for o�ce �oors and raised access �oors.

pro-plint stainless steel

pro-plint

Floor skirtingFloor skirting

KEA SAP h (mm) h (inches)B79141001 100005635 Gloss 80 3B79141002 100005636 Brushed 80 3

Stainless steel

pro-plinth

pro-plint aluminum R

KEA SAP h (mm) h (inches)B79123001 100005633 Base 80 3B79123002 100005634 Top 80 3

Anodized aluminumKEA SAP h (mm) h (inches)B79141505 100007584 Outer 80 3B79141506 100007585 Internal 80 3

Pro-plint R corner

KEA SAP h (mm) h (inches)B79141507 100031428 Cap set 80 3

Special pieces

pro-plint Rh

KEA SAP h (mm) h (inches)B79141508 100073104 Silver 80 3

Anodized aluminumKEA SAP h (mm) h (inches)B79141509 100073106 Inner 80 3B79141513 100073105 Outer 80 3

Pro-plint corner

KEA SAP h (mm) h (inches)B79141510 100073109 Pro�le joining piece 80 3B79141511 100073107 Right trim 80 3B79141512 100073108 Left trim 80 3

Special pieces

pro-plint aluminum pro-plinth

pro-plint R PVCcap set

pro-plint R PVCouter angle

pro-plint R PVCinner angle


Technical pro�les

pro-sanit U1 and pro-sanit U2 pro�les length: 2500 mm - 8 feet longpro-sanit S1 and pro-sanit S3 pro�les length: 1830 mm - 6 feet long

Concave pro�le for installation where walls and �oors meet or between wall coverings and bathtubs, shower trays or other bath elements. It substitutes the traditional curve ceramic piece.

It reduces the risk of water leakage and eases cleaning and preservation of angles between �oor and wall coverings.

pro-sanit U2

pro-sanit U1

pro-sanit S1

pro-sanit

Floor covering trimsBathtubs and showers trims

KEA SAP h (mm) h (inches)B77111005 100005530 White 9 23/64B77111008 100005533 Ivory 9 23/64

PVC


Anodized aluminum silverKEA SAP h (mm) h (inches)B77199014 100062075 16 5/8B77199018 100062076 22 7/8

Aluminum gloss silver

KEA SAP h (mm) h (inches)B77199013 100062079 White 16 5/8B77199016 100062080 White 22 7/8

Lacquered aluminum

KEA SAP h (mm) h (inches)B77111013 100005538 White 9 23/64B77111016 100005541 Ivory 9 23/64B77111017 100005542 White 11 7/16B77111020 100005545 Ivory 11 7/16

PVC

KEA SAP h (mm) h (inches)B77141001 100005566 gloss 12.5 1/2B77142001 100005569 brushed 12.5 1/2

Stainless steelKEA SAP h (mm) h (inches)B77141501 100005567 Gloss Outer 12.5 1/2B77141502 100005568 Gloss Inner 12.5 1/2B77142501 100005570 Brushed outer 12.5 1/2B77142502 100005571 Brushed internal 12.5 1/2


KEA SAP h (mm) h (inches)B77111029 100005554 White 23 29/32

PVC

pro-sanit U1 PVC h

pro-sanit U2

h

h

pro-sanit S123 mm - 29/32”

17.5 mm - 11/16”

pro-sanit S3

KEA SAP h (mm) h (inches)B77111035 100005560 White 23 29/32

PVCKEA SAP h (mm) h (inches)B77111038 100005563 white (4 u.) 23 29/32

Side cap

pro-sanit S3

32 mm - 1 1/4”pro-sanit S3

trim caps


pro-sanit U1 alu

h

54

Floor skirting

pro-skirting

KEA SAP h (mm) h (inches)B79141522 100120374 60 2 23/64



Chromed aluminum

White lacquered aluminum

Anodized aluminum




Chromed aluminum corner

White lacquered aluminum corner

Anodized aluminum corner

pro-skirtingh

10 mm

Technical pro�les

Metallic skirting for �oor tile coverings. Metal pro�les in �ve �nishes and straight trims. They replace traditional ceramic skirting. Specially recommended for shops and public buildings.

pro-skirting

Cement-based adhesivestixocemone-�exsuper-�ex S2

Reactive resins adhesivepolitech n

Additives for cement-based adhesivesunilax

Façade �xingsconcealed façade �xings

Adhesives for ceramictile �xing

585960

61

62

63

58 59

tixocem

Cement-based adhesives

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

tixocem is a single-component, thin-set mortar for interior and exterior installations of stone, ceramic, porcelain and quarry tile. This mortar is formulated with a unique dry polymer, resulting in good adhesion to the substrate and tile.

Single-component, high-tech adhesive for laying absorbent ceramic tiles. Excellent workability, easy to apply with extended working times. No sagging.

tixocem

Features:

• Single-component thin-set mortar• Good adhesion to the substrate and tile.• Open time > 20 min.• Economical polymer-modi�ed mortar.• Mixing water: 5.25 US qts. per 50 lbs. bag

Recommended use:

• Most interior residential installations on �oors and walls.• Most interior commercial installations on �oors.• Most interior commercial installations on walls.• Do not use in swimming pools or installations subject to prolonged water

immersion.• tixocem is not recommended for areas subject to severe freeze/thaw conditions.

Coverage:

• ¼” x ¼” notched trowel 75 to 90 sq.ft. per 50 lbs. bag• ¼” x 3/8” notched trowel 55 to 65 sq.ft. per 50 lbs. bag• ½ x ½” notched trowel 35 to 45 sq.ft. per 50 lbs. bag

Coverage:

• ¼” x ¼” notched trowel 75 to 90 sq.ft. per 50 lbs. bag• ¼” x 3/8” notched trowel 55 to 65 sq.ft. per 50 lbs. bag• ½ x ½” notched trowel 35 to 45 sq.ft. per 50 lbs. bag

Substrates:

• Masonry cement block, brick, cement mortar beds and leveling coats.• Concrete (cured at least 28 days).• Cement backer units (CBUs).• Gypsum wallboard for interior walls in dry areas only.• Do not use directly over gypsum-based substrates. Over this kind of substrates

apply suitable sealer before use. butech recommends uniprim, acrilic primer for cement and gypsum substrates.

• Do not use over dimensionally unstable substrates such as hardwood �ooring, oriented strand board (OSB), substrates containing asbestos, or metal.

• Do not use over hardwood, exterior grade plywood, vinyl covered wall board, plastic surfaces, glass, cement asbestos board, metal, particle board or asphalt sheeting.

Certi�cations/Standards:

ISO 13007 C2ANSI: Exceeds ANSI A118.4

Materials:

• Ceramic and porcelain tiles (water absorption < 0.5% according EN-ISO 10545-3).• Quarry tiles• Natural stone.• Do not use for porcelain tiles 18” x 18” ( 38 x 38 cm ) or larger tiles.• Do not use for moisture-sensitive stone, agglomerate tiles, DQS, cultured marble

or resin-backed tiles. Instead, use suitable epoxy adhesive.

Presentation Europallet50 lbs. (22.7 kgs.) 3000 lb / palet50 lbs. (22.7 kgs.) 3000 lb / palet

Packagingtixocem

wall tile �oor tile �oor tileporcelain tile

mediumformat

large format outdoor

Bathrooms and kitchens



one-flex is a high tech single-component, high-performance, polymer-modified thin-set mortar for interior and exterior installations of tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Formulated with low-dust technology, one-�ex reduces dust by 90% during pouring and mixing, resulting in a cleaner environment.

Advanced, high-performance adhesive, with an excellent adherence and flexibility, suitable for the most di�cult installations, like high tra�c �oors, radiant heating �oors or façades. Its performance and ease of application make it the ideal solution for the most demanding professionals. Specially recommended for laying recti�ed tiles.

Features:

• Single-component thin-set mortar• Polymer-enriched for high performance and deformability• Low-dust technology reduces dust by 90% resulting in a cleaner environment.• Smooth and creamy consistency for easy for easy application.• Open time > 30 min.• Mixing water: 5,5 US qts. per 50 lbs. bag.

Recommended use:

• Most interior/exterior residential installations on �oors and walls.• Most interior/exterior commercial installations on �oors and walls.• Installation of ceramic and porcelain tile, quarry tile, pavers, and many types of

marble, granite and natural stone.• Swimming pools or installations subject to prolonged water immersion.• one-flex mixed with water is not recommended for areas subject to severe

freeze/thaw conditions. one-�ex must be mixed with unilax.

Substrates:

• Masonry cement blocks, bricks, cement mortar beds and levelling coats.• Concrete (cured at least 28 days).• Cement backer units (CBUs).• Gypsum wallboard for interior walls in dry areas only.• APA and CANPLY Group 1 exterior-grade plywood (interior, residential and light

commercial in dry conditions only).• Properly prepared vinyl composition tile (VCT) and cutback residue (interior

only).• Properly prepared existing ceramic and porcelain tile, quarry tile and pavers

(interior only).

• Do not use directly over gypsum-based substrates. Over this kind of substrates apply suitable sealer before use. butech recommends uniprim, acrilic primer for cement and gypsum substrates.

Standards and approvals:

ISO 13007 C2 E P1ANSI: Exceeds ANSI A118.4 and A118.11

Materials:

• Ceramic and porcelain tiles ( water absorption < 0.5% according EN-ISO 10545-3 ).• Quarry tiles• Glass and mosaic tiles• Natural stone.• Do not use for moisture-sensitive stone, agglomerate tiles, DQS, cultured marble

or resin-backed tiles. Instead, use suitable epoxy adhesive.

KEAB11903900 tixocem whiteB11904900 tixocem gray

KEAB12903900 one-�ex whiteB12904900 one-�ex gray

Presentation Europallet50 lbs. (22.7 kgs.) 3000 lb / palet50 lbs. (22.7 kgs.) 3000 lb / palet

Packaging

ston-ker glassmosaic

large sizetiles

plywood hightra�c

swimming poolsone-�ex

one-�ex

one-�ex

• Tile 8” x 13” ( 20 x 30 cm ) 0.65 lb/ sqft ( 3 kg / m2 )• Tile 13” x 13” ( 30 x 30 cm ) 0.65 lb/ sqft ( 3 kg / m2 )• Tile 13” x 24“ ( 30 x 60 cm ) 0.85 lb/ sqft ( 4 kg / m2 )• Tile 18” x 18“ ( 44 x 44 cm ) 0.85 lb/ sqft ( 4 kg / m2 )• Tile 13” x 36“ ( 30 x 90 cm ) 1.0 lb/ sqft ( 5 kg / m2 )• Tile 18” x 24” ( 44 x 66 cm ) 1.0 lb/ sqft ( 5 kg / m2 )

• Tile 8” x 13” ( 20 x 30 cm ) 0.65 lb/ sqft ( 3 kg / m2 )• Tile 13” x 13” ( 30 x 30 cm ) 0.65 lb/ sqft ( 3 kg / m2 )• Tile 13” x 24“ ( 30 x 60 cm ) 0.85 lb/ sqft ( 4 kg / m2 )• Tile 18” x 18“ ( 44 x 44 cm ) 0.85 lb/ sqft ( 4 kg / m2 )• Tile 13” x 36“ ( 30 x 90 cm ) 1.0 lb/ sqft ( 5 kg / m2 )• Tile 18” x 24” ( 44 x 66 cm ) 1.0 lb/ sqft ( 5 kg / m2 )• Tile 24” x 24” ( 60 x 60 cm ) 1.25 lb/ sqft ( 6 kg / m2 )• Tile 24” x 48” ( 60 x 120 cm ) 1.25 lb/ sqft ( 6 kg / m2 )

Porcelain �oor tiles and swimming pools

60 61

politech n

Reactive resins adhesive


politech n is a type R2 T high-tech, two-component polyurethane adhesive as per EN 12004, for laying tiles on deformable substrates. Specially recommended for special substrates like metal sheets or synthetic materials, where cement-based adhesives cannot be used.

A high-tech two-component polyurethane adhesive with high performance properties. Suitable for laying ceramic tiles of all kinds on deformable substrates.

politech n

Features:

• Two-component polyurethane adhesive.• Excellent adherence. Maximum deformability.• No water absorption. Waterproof.• High chemical resistance.• High initial adherence and no sagging.• Application thickness up to 8 mm.• Frost-resistant.

Recommended use:

• Laying of wall tiles not compatible with cement-based adhesives.• Wall tiles on substrates not compatible with cement-based adhesives.• Floor tiles on deformable substrates.• Floor tiles with special chemical resistance.• Laying of slate and other natural stones with risk of deformation by water

absorption.• Substrate waterproo�ng.

Substrates:

• Concrete or mortar substrates.• Plasterboards and plaster or anhydrite walls.• Plasterboards/wood boards.• Existing wall tiles.• Metal sheets.• Polyester or PVC surfaces.


EN 12004 R2 T

Materials:

• Large format ceramics.• Porcelain tiles with a water absorption < 0.5% as per EN-ISO 10545-3.• Glass mosaic.• Natural stone and marble not prone to staining.• DQS slabs and other kinds of marble agglomerate.• Krion slabs and other kinds of Solid Surface.

KEA SAPB41061001 100004369 politech n white

Presentation Europallet22 lbs./bucket 792 lb /palet

Packagingpolitech n

ston-ker large sizetiles

wood metal

Metal stairs

PVC waterproof

Coverage:

• ¼” x ¼” notched trowel 33 to 40 sq.ft. per 22 lbs. bucket• ¼” x 3/8” notched trowel 24 to 28 sq.ft. per 22 lbs. bucket• ½ x ½” notched trowel 15 to 20 sq.ft. per 22 lbs. bucket



super-�ex S2 is a type C2 TE S2 high-performance no dust cement-based adhesive, as per EN 12004, for laying all kinds of ceramic tiles on the most used substrates in the building industry. Specially recommended for laying large format, thin porcelain tiles like XLIGHT from URBATEK.

This adhesive features excellent performance in adherence and deformability with no need for mixing with additives and excellent conditions of use: low dust generation and an only 15 kg package. This state-of-the-art adhesive includes additives and polymers which increase performance. This means that with a 15 kg bag of super-�ex S2 you can lay the same tiles surface than with a 25 kg bag of regular adhesive.

Features:

• Cement-based, single component adhesive.• Lightened adhesive. Low consumption onsite.• Low emission of dust and other airborne particles.• Maximum adherence and deformability.• High initial adherence and no sagging. Thixotropic.• Extended working times. Open time higher than 30 min.• Application thickness up to 10 mm.• Frost-resistant.• Mixing water: 8 l per 15 kg bag

Recommended use:

• Indoor coverings with ceramic sheets like XLIGHT.• Laying of ceramics in refurbishing jobs.• Indoor large format ceramic tile coverings.• Indoor and outdoor porcelain tile coverings.• High tra�c �oor tiles.• Floor tiles on radiant heating.• Pools and damp environments.

Substrates:

• Cement covered �oors and walls .• Concrete slabs.• Plasterboards.• Existing wall tiles.• On anhydrite or plaster substrates apply uniprim.

Standards and approvals:

EN 12004 C2 TE S2

Materials:

• Large format ceramics.• Porcelain tiles (water absorption < 0.5% as per EN-ISO 10545-3).• Large format, thin porcelain tiles like XLIGHT.• Glass mosaic.• Natural stone and marble not prone to staining.• DQS slabs and other kinds of marble agglomerate.

KEA SAPB12909017 100142757 super-�ex S2 white

Presentation Europallet33 lbs. (15 kgs.) 2200 lb /palet

Packaging

super-�ex S2

super-�ex S2

super-�ex S2

• Tile 8” x 13” ( 20 x 30 cm ) 0.45 lb/sqft (2.00 kg / m2)• Tile 13” x 13” ( 30 x 30 cm ) 0.45 lb/sqft (2.00 kg / m2)• Tile 13” x 24“ ( 30 x 60 cm ) 0.55 lb/sqft (2.50 kg / m2)• Tile 18” x 18“ ( 44 x 44 cm ) 0.55 lb/sqft (2.50 kg / m2)• Tile 13” x 36“ ( 30 x 90 cm ) 0.65 lb/sqft (3.00 kg / m2)• Tile 18” x 24” ( 44 x 66 cm ) 0.65 lb/sqft (3.00 kg / m2)• Tile 24” x 24” ( 60 x 60 cm ) 0.75 lb/sqft (3.56 kg / m2)• Tile 24” x 48” ( 60 x 120 cm ) 0.75 lb/sqft (3.56 kg / m2)

XLIGHT coverings

Coverage:

ston-ker XLIGHT glass mosaic

large format existing ceramics

high tra�c

6362

Minimum A/T joint 4

Minimum A/T joint 8

Minimum I joint Minimum A/T joint 16

Presentation50 u. bag

Presentation50 u. bag50 u. bag50 u. bag

concealed façade �xings

Façade �xings

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.For further information on additional materials refer to the corresponding page in this catalogue.

Innovative concealed fixing clip for ceramic tiles in bonded façades. The fixings fit within small slots done on the porcelain piece and are anchored to the support by a stainless steel screw. Once the joints are grouted, the �xings are not visible anymore, not a�ecting the façade design.

These �xings have been designed as a security element in porcelain tile walls installed by the thin layer, double bonding method. We recommend the use of type C2 S2 cement-based adhesives as per EN 12004.

As a general rule, we recommend this kind of �xing from a height corresponding to �rst concrete slab. In any case, standards in force must be observed for every project.

Concealed bonded façades �xings

Features:

• 1.4301 (AISI 304 V2A) stainless steel clips.• Suitable for 5 mm - 7 mm · 13/64” - 17/64” wide joints.• Suitable for tiles 9 mm to 12 mm · 15/32“ to 23/64” thick.• Start �xings available in 80 · 3” and 160 · 6” mm lengths for overhanging instal-

lations.• Includes stainless steel screw and plug.

Recommended use:

• Laying of tiles in façades.• Laying of ceramics in ceilings and cornices.• Indoor laying of large format porcelain tiles at a certain height.

Coverage:

Coverage changes with every façade design. In the case of a regular façade with no gaps, clip calculation would be the following:

Tile Type I �xings Type A/T �xings cm - inches un./sq.ft. un./sq.ft.

44 x 66 - 18 x 24 0,51 0,13

60 x 60 - 24 x 24 0,42 0,10

45 x 90 - 18 x 36 0,37 0,09

60 x 120 - 24 x 68 0,32 0,08

Additional materials:

Substrates:

• Cement covered �oors and walls .• Concrete slabs.

Materials:

• Medium and large format porcelain tiles resistant to side slotting: - STON-KER - PAR-KER - URBATEK

KEA SAP concealed �xingB80111001 100005743 minimum I joint

KEA SAP concealed �xingB80111002 100005744 minimum A/T joint 4 cmB80111003 100005745 minimum A/T joint 8cmB80400012 100032736 minimum A/T joint 16cm

one-�ex 1,25 - 1,50 lb/ sqftunilax 0,30 - 0,35 lb/ sqft

Packagingconcealed façade �xings

Façades

outdoor joint< 5 mm

< 13/64 “

joint 5-7 mm

13/64” - 17/64”

�oor tile porcelain tile

ston-kerslotted

urbatekslottedunilax

Additives for cement-based adhesives


unilax is a latex that, mixed with cement-based adhesives like one-�ex, fr-one n or super one n, rapimax n or maxi�uid improves bonding strength and �exibility up to level C2 S2 as per EN 12004. Specially recommended for laying wall tiles outdoors.

A resin-based latex that can be added to cement-based adhesives to enhance their bonding strength and �exibility. Specially recommended for exterior façades.

unilax

Features:

• Water-based acrylic resins latex.• Resistant to the most common chemicals.• Excellent resistance to UV rays and the e�ect of heat.• Frost-resistant.

Recommended use:

• Laying of tiles in façades.• Large format ceramic �oor tiles on radiant heating.• Indoor large format ceramic tile coverings on deformable substrates.• Indoor and outdoor porcelain tile coverings.• High tra�c �oor tiles.• Pools and damp environments.

Substrates:

• Concrete or mortar substrates.• Plasterboards.• Plywood panels.• Existing wall tiles.

Materials:

• Large format ceramics.• Porcelain tiles with a water absorption < 0.5% as per EN-ISO 10545-3.• Glass mosaic.• Natural stone and marble not prone to staining.• DQS slabs and other kinds of marble agglomerate.

KEA SAPB51601002 100004376 unilaxB51602002 100004377 unilax

Presentation Europallet44 lbs./bucket 1233 lb /palet11 lbs./bucket 1057 lb /palet

Packagingunilax

exterior�oor

under�oorheating

swimming pools

bondedfaçades

tixocem one-�ex

Coverage:

Product % US qts. lbs/bag

tixocem 22% 5,0 - 5,5 50

one-�ex 23% 5,0 - 6,0 50

Façades

Cement-based materials for tile jointscolorstuk 0-4colorstuk 2-12colorstuk especial ncolorstuk rapid n

Epoxy grouting materialsepotech aquaepotech crystalepotech gold & silverepotech

Leveling system for ceramic tiles.Self-leveling spacers

Elastic joint sealantss-107s-107 np-404

Additive for grouting materialcl-stuk

66687072

74757677

78

808182

83

Grouting material andelastic sealants

66 67

COLORSTUK 0-4

colorstuk 0-4

Cement-based materials for tile joints


* Replace mixing water by cl-stuk.

colorstuk 0-4 is a type CG 2 �ne grain grouting material as per EN 13888, for grouting joints up to 4 mm. It is easy to apply, resistant and colour stable, and it is specially recommended for recti�ed tiles.

A high-tech, �ne grained colored mortar for grouting tile joints from 0 to 4 mm · 3/16”. Suitable for all kinds of ceramic tiles and natural stone. Indoors and outdoors.

colorstuk 0-4

Features:

• Cement-based, single-component, colored mortar.• Fine texture mortar for grouting tile joints up to 4 mm · 3/16”.• Easy to apply and clean.• Resistant to heat and UV radiation.• Frost-resistant.• Wide colour range.

Recommended use:

• Tile joints up to 4 mm · 3/16”.• Indoor wall tile coverings. Specially recommended for recti�ed tiles.• Indoor �oor tiles, including public buildings.In the following applications, replace mixing water by cl-stuk additive.• Outdoor �oors.• High tra�c �oor tiles.• Floor tiles on radiant heating.• Pools and damp environments.

Substrates:

• All usual substrates for ceramic tiles laying.


EN 13888 CG2

Materials:

• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Natural stone and marble not prone to staining.In the following applications, replace mixing water by cl-stuk additive.• Wall tiles with mosaic-like patterns.• DQS slabs and other kinds of marble agglomerate.

glassmosaic

recti�edceramics

indoors hightra�c

pools radiantheating


Colours shown are approximate. There are physical samples available to customers for checking the real grout colour.

Packagingcolorstuk 0-4KEA SAPB21501001 100004253 whiteB21502002 100004255 manhattanB21502003 100004256 bahamaB21502004 100004257 cementB21502005 100004258 anthraciteB21502006 100004259 blackB21502009 100004260 ivoryB21502010 100004261 brownB21502016 100004262 beigeB21522218 100060532 caramelB21522217 100060533 mokaB21522219 100060534 gray

B21901001 100004287 whiteB21902002 100004288 manhattan

Presentation Europallet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet11 lb bag 880 lb /palet

55 lb bag 2200 lb /palet55 lb bag 2200 lb /palet

Bath environments

Coverage

TILE SIZEGROUT JOINT WIDTH

Coverages in sq.ft. (m2) per 11 lbs. (5 kg)Width x Length x Thickness 1/16” (1,5 mm) 1/8” (3 mm)

1" x 1" x 1/4" (25x25x6 mm) 50 (5) 25 (2)2" x 2" x 1/4" (50x50x6 mm) 100 (9) 50 (5)3" x 3" x 1/4" (75x75x6 mm) 149 (14) 75 (7)8" x 12" x 3/8" (200x316x10 mm) 292 (27) 147 (14)12" x 12" x 3/8" (316x316x10 mm) 379 (35) 189 (18)12" x 18" x 3/8" (316x446x10 mm) 441 (41) 221 (21)12" x 23" x 3/8" (316x596x10 mm) 494 (46) 247 (23)18" x 18" x 3/8" (446x446x10 mm) 533 (50) 266 (25)12" x 35" x 3/8" (316x900x10 mm) 560 (52) 280 (26)17" x 26" x 3/8" (435x659x10 mm) 626 (58) 313 (29)23" x 23" x 3/8" (596x596x10 mm) 708 (66) 356 (33)23" x 47" x 3/8" (596x1200x10 mm) 944 (88) 476 (44)32" x 32" x 3/8" (800x800x10 mm) 961 (89) 476 (44)7" x 26" x 3/8" (180x659x10 mm) 338 (31) 169 (16)8" x 47" x 1/4" (193x1200x10 mm) 399 (37) 169 (16)

68 69

COLORSTUK 2-12

colorstuk 2-12



colorstuk 2-12 is a type CG 2 �ne grain grouting material as per EN 13888, for grouting joints from 2,5 to 12 mm · 1/8” to 1/2”. It is easy to apply, resistant and colour stable, and it is specially recommended for �oors with a wide joint.

A high-tech, �ne grained colored mortar for grouting tile joints from 2,5 to 12 mm · 1/8” to 1/2”. Suitable for all kinds of ceramic tiles and natural stone. Indoors and outdoors.

colorstuk 2-12

Features:

• Cement-based, single-component, colored mortar.• Fine texture mortar for grouting tile joints from 2,5 to 12 mm · 1/8” to 1/2”.• Easy to apply and clean.• Resistant to heat and UV radiation.• Frost-resistant.• Wide colour range.

Recommended use:

• Tile joints from 2,5 to 12 mm · 1/8” to 1/2”.• Indoor wall tile coverings with wide joint.• Indoor �oors. Specially recommended for rustic tiles.In the following applications, replace mixing water with cl-stuk additive.• Outdoor �oor and wall tiles.• High tra�c �oor tiles.• Floor tiles on radiant heating.• Pools and damp environments.

Substrates:



EN 13888 CG2

Materials:

• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Natural stone and marble not prone to staining.• Terracotta tiles.In the following applications, replace mixing water with cl-stuk additive.• Ceramic tiles with relief to be covered with grouting material.

KEA SAPB21522002 100004273 manhattanB21522003 100004274 bahamaB21522004 100004275 cementB21522005 100004276 anthraciteB21522006 100004277 blackB21522009 100004278 ivoryB21522016 100004279 beigeB21521001 100004271 whiteB21522224 100060541 grayB21522223 100060544 mokaB21522221 100060547 caramelB21522222 100060548 brown

B21922002 100004289 manhattanB21922003 100004290 cementB21922004 100004291 anthracite

Presentation Europallet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet

55 lb bag 2.200 lb/palet55 lb bag 2.200 lb/palet55 lb bag 2.200 lb/palet

Packagingcolorstuk 2-12



Coverage

rustic recti�edceramics

indoors hightra�c

outdoor�oors

Rustic �oors

radiantheating



Coverages in sq.ft. (m2) per 11 lbs. (5 kg)Width x Length x Thickness 1/8” (3 mm) 1/4” (6 mm) 3/8” (10 mm) 1/2” (12 mm )

1" x 1" x 1/4" (25x25x6 mm) 23 (2) 12 (1) 7 (0,5) 6 (0,5)2" x 2" x 1/4" (50x50x6 mm) 47 (4) 23 (2) 14 (1) 12 (1)3" x 3" x 1/4" (75x75x6 mm) 70 (7) 35 (3 21 (2) 18 (2)8" x 12" x 3/8" (200x316x10 mm) 137 (13) 69 (6) 41 (4) 34 (3)12" x 12" x 3/8" (316x316x10 mm) 177 (16) 88(8) 53 (5) 44(4)12" x 18" x 3/8" (316x446x10 mm) 207 (19) 104 (10) 62 (6) 52 (5)12" x 23" x 3/8" (316x596x10 mm) 232 (22) 116 (11) 69 (6) 58 (5)18" x 18" x 3/8" (446x446x10 mm) 250 (23) 125 (12) 75 (7) 62 (6)12" x 35" x 3/8" (316x900x10 mm) 262 (24) 131 (12) 79 (7) 66 (6)17" x 26" x 3/8" (435x659x10 mm) 294 (27) 147 (14) 88 (8) 73 (7)23" x 23" x 3/8" (596x596x10 mm) 334 (31) 167 (16) 100 (9) 84 (8)23" x 47" x 3/8" (596x1200x10 mm) 445 (41) 223 (21) 134 (12) 112 (10)32" x 32" x 3/8" (800x800x10 mm) 448 (42) 224 (21) 135 (13) 112 (10)

70 71

COLORSTUK ESPECIAL N


colorstuk especial n is a type CG 2 very �ne grain grouting material as per EN 13888, for grouting joints up to 4,5 mm · 3/16”. Its formula includes ultra�ne aggregates, which make it specially recommended for tiles with a glaze sensitive to scratching.

A high-tech, �ne grained colored mortar for grouting tile joints up to 4,5 mm · 3/16”. Specially recommended for grouting recti�ed ceramic tiles sensible to scratching.

Features:

• Cement-based, single-component, colored mortar.• Ultra�ne aggregates formula.• Fine texture mortar for grouting tile joints up to 4,5 mm · 3/16”.• Easy to apply and clean.• Resistant to heat and UV radiation.• Frost-resistant.• Wide special colours range.

Recommended use:

• Tile joints up to 4,5 mm.• Ceramic tiles with low hardness glaze as per Mohs scale.• Indoor wall tile coverings. Specially recommended for recti�ed tiles.• Indoor �oor tiles, including public buildings.In the following applications, replace mixing water with cl-stuk additive.• Wall and �oor tiles into direct contact with water.• Floor tiles on radiant heating.

Substrates:



EN 13888 CG2

Materials:

• Absorbent and non-absorbent ceramic tiles.• Ceramic tiles with special �nishes.• Glass mosaic.• Natural stone and marble not prone to staining.• Do not use on polished materials.In the following applications, replace mixing water by cl-stuk additive.• Wall tiles with mosaic-like patterns.• DQS slabs and other kinds of marble agglomerate.

KEA SAPB2430242 100090682 acidB2430249 100090684 cherryB2430243 100090685 darkB2430247 100090686 mokaB2430242 100090687 nacareB2430244 100090689 vanillaB2430246 100090690 white B2430251 100097181 graphite

Presentation Europallet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet4,4 lb bag 950 lb/palet

Packagingcolorstuk especial n

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.


glassmosaic

recti�edceramics

bathenvironments

Crystalseries

Bath environments

radiantheating

hightra�c


colorstuk especial n

colorstuk especial n

Coverage


Coverages in sq.ft. (m2) per 4,4 lbs. (2 kg)Width x Length x Thickness 1/16” (1,5 mm) 1/8” (3 mm)

1" x 1" x 1/4" (25x25x6 mm) 18,8 (2) 9,2 (1)2" x 2" x 1/4" (50x50x6 mm) 15,6 (1) 18,8 (2)3" x 3" x 1/4" (75x75x6 mm) 56 (5) 28 (3)8" x 12" x 3/8" (200x316x10 mm) 110,4 (10) 5,2 (0,5)12" x 12" x 3/8" (316x316x10 mm) 141,6 (13) 70,8 (7)12" x 18" x 3/8" (316x446x10 mm) 165,6 (15) 82,8 (8)12" x 23" x 3/8" (316x596x10 mm) 185,6 (17) 92,8 (9)18" x 18" x 3/8" (446x446x10 mm) 199,2 (18) 100 (9)12" x 35" x 3/8" (316x900x10 mm) 208,8 (19) 104,8 (10)17" x 26" x 3/8" (435x659x10 mm) 244,4 (22) 117,6 (11)23" x 23" x 3/8" (596x596x10 mm) 265,6 (24) 133,6 (12)23" x 47" x 3/8" (596x1200x10 mm) 358,8 (33) 178 (16)32" x 32" x 3/8" (800x800x10 mm) 358,8 (33) 179,2 (16)7" x 26" x 3/8" (180x659x10 mm) 127,6 (12) 63,2 (6)8" x 47" x 1/4" (193x1200x10 mm) 149,6 (14) 74,4 (7)

72 73

COLORSTUK RAPID


Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet. Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

colorstuk rapid n is a type CG 2 high-performance, cement-based grouting material as per EN 13888, for grouting joints from 1,5 to 16 mm - 1/16” to 5/8”. Suitable for all kinds of ceramic tiles and natural stone, it is specially recommended for outdoor applications and permanently damp environments . A high-tech, fine grained colored mortar with fast setting and hardening times for grouting tile joints from 1,5 to 16 mm - 1/16” to 5/8”. Suitable for all kinds of ceramic tiles and natural stone. Indoors and outdoors.

Features:

• Cement-based, single-component, colored mortar.• Fine texture mortar for grouting tile joints from 1,5 to 16 mm - 1/16” to 5/8”.• Mortar with fast setting and hardening times.• It prevents e�orescences.• Excellent mechanical resistance.• Resistant to heat and UV radiation.• Frost-resistant.• Waterproof mortar.• Anti-mold action.• Easy to apply and clean.• Wide colour range.

Recommended use:

• Tile joints from 1,5 to 16 mm - 1/16” to 5/8”.• Indoor wall and �oor tiles.• Outdoor �oors and terraces.• High tra�c �oor tiles.• Floor tiles on radiant heating.• Pools and damp environments.• Outdoor wall tiles in façades.

Substrates:


Materials:

• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Tiles with mosaic-like patterns.• Glass mosaic.• Clay and terracotta tiles.• Natural stone and marble not prone to staining.

Presentation Europallet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet11 lb bag 880 lb/palet

55 lb bag 2.200 lb/palet

Packagingcolorstuk rapid n


EN 13888 CG2 Ar W

KEA SAPB22501001 100004294 whiteB22502002 100004295 manhattanB22502003 100004296 bahamaB22502004 100004297 cementB22502005 100004298 anthraciteB22502006 100004299 blackB22502007 100004300 caramelB22502008 100004301 terracottaB22502009 100004302 ivoryB22502010 100004303 brownB22502011 100004304 tobaccoB22502013 100004305 grayB22502016 100004308 beigeB21522220 100060549 moka

B22902002 100004309 black


Coverage

glassmosaic

recti�edceramics

high tra�c bathroomenvironments

pools façades

Outdoor �oors

colorstuk rapid n

colorstuk rapid n

TILE SIZE GROUT JOINT WIDTHCoverages in sq.ft. (m2) per 11 lbs. (5 kg)

Width x Length x Thickness 1/16” (1,5 mm) 1/8” (3 mm) 3/16” (4,5 mm ) 1/4” (6 mm) 3/8” (10 mm) 1/2” (12 mm )1" x 1" x 1/4" (25x25x6 mm) 50 (5) 25 (2) 17 (1,5) 12 (1) 7 (0,5) 6 (0,5)2" x 2" x 1/4" (50x50x6 mm) 100 (9) 50 (5) 33 (3) 25 (2) 15 (1) 12 (1)3" x 3" x 1/4" (75x75x6 mm) 149 (14) 75 (7) 50 (5) 37 (3) 22 (2) 19 (2)8" x 12" x 3/8" (200x316x10 mm) 292 (27) 147 (14) 98 (9) 73 (7) 44 (4) 37 (3)12" x 12" x 3/8" (316x316x10 mm) 379 (35) 189 (18) 126 (12) 94 (9) 57 (5) 47 (4)12" x 18" x 3/8" (316x446x10 mm) 441 (41) 221 (21) 147 (14) 110 (10) 66 (6) 55 (5)12" x 23" x 3/8" (316x596x10 mm) 494 (46) 247 (23) 165 (15) 123 (11) 74 (7) 62 (6)18" x 18" x 3/8" (446x446x10 mm) 533 (50) 266 (25) 178 (17) 133 (12) 80 (7) 67 (6)12" x 35" x 3/8" (316x900x10 mm) 560 (52) 280 (26) 186 (17) 140 (13) 84 (8) 70 (6)17" x 26" x 3/8" (435x659x10 mm) 626 (58) 313 (29) 209 (19) 157 (15) 94 (9) 114 (11)23" x 23" x 3/8" (596x596x10 mm) 708 (66) 356 (33) 237 (22) 178 (17) 107 (10) 89 (8)23" x 47" x 3/8" (596x1200x10 mm) 944 (88) 476 (44) 316 (29) 238 (22) 143 (13) 119 (11)32" x 32" x 3/8" (800x800x10 mm) 961 (81) 476 (44) 318 (30) 239 (22) 143 (13) 120 (11)7" x 26" x 3/8" (180x659x10 mm) 338 (31) 169 (16) 113 (10) 84 (8) 51 (5) 42 (4)8" x 47" x 1/4" (193x1200x10 mm) 399 (37) 199 (18) 133 (12) 99 (9) 60 (6) 50 (5)

7574

EPOTECH AQUAEPOTECH CRYSTAL


EN 13888 RG

epotech aqua

Epoxy grouting materials


epotech aqua is a new line of epoxy putties for grouting tile joints. Two-component epoxy putty with no organic solvents. It is waterproof, it has outstanding chemical and mechanical properties and it is easy to apply. Specially recommended for application on mosaics and ceramic tiles with relief.

This material is suitable for grouting joints from 0 to 10 mm · 3/8” in �oor and wall tiles, indoors and out. Excellent resistance to chemicals. Suitable for pools and permanently damp environments. Suitable as high adherence grouting material for ceramic tiles with any absorption level and format, for glass mosaic or natural stone.

epotech aqua

Features:

• Two-component colored epoxy putty.• Easy to apply and clean. This product is free of organic solvents and plasticizers• Excellent joint colour stability.• Resistance to most chemicals and alkali, even in high concentrations.• Waterproof joint, no water absorption.• Excellent adherence and mechanical resistance.• Tile joints up to 10 mm.• Wide colour range.

Recommended use:

• Public toilets and private bathrooms.• Wall tiles with special chemical resistance.• Pools and damp environments.• Tile joints with uniform colour and shade, resistant to the passing of time.• High tra�c and outdoor �oors.• High adherence grouting material. Specially recommended. - Slate and natural stone. - Mesh backed glass mosaic.

Substrates:


Materials:

• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Tiles with mosaic-like patterns. Please refer to PORCELANOSA /

VENIS catalogues.• Glass mosaic.• Natural stone and marble not prone to staining.

KEA SAPB42562016 100090692 anthraciteB42562017 100090693 beigeB42562020 100090694 whiteB42562018 100090695 cherry B42562019 100090696 grayB41061004 100116037 ivory

B35200002 100113684 epoxy cleaning kit

Presentation Europallet7,93 lb can 634,4 lb/palet7,93 lb can 634,4 lb/palet7,93 lb can 634,4 lb/palet7,93 lb can 634,4 lb/palet7,93 lb can 634,4 lb/palet

Packaging

epotech aqua

kitchencountertops

bathroom environments

publictoilets

adhesiveepoxy

shower traysshowers

pools

Bath environments


Coverage


Width x Length x Thickness 1/8” (3 mm) 1/4” (6 mm) 3/8” (10 mm)1" x 1" x 1/4" (25x25x6 mm) 14 (1) 7 (0,5) 4 (0,2)2" x 2" x 1/4" (50x50x6 mm) 28 (2) 14 (1) 8 (0,5)3" x 3" x 1/4" (75x75x6 mm) 41 (4) 21 (2) 12 (1)8" x 12" x 3/8" (200x316x10 mm) 81 (8) 41 (4) 24 (2)12" x 12" x 3/8" (316x316x10 mm) 105 (10) 52 (5) 31 (3)12" x 18" x 3/8" (316x446x10 mm) 123 (11) 61 (6) 37 (3)12" x 23" x 3/8" (316x596x10 mm) 137 (13) 68 (6) 41 (4)18" x 18" x 3/8" (446x446x10 mm) 148 (14) 74 (7) 44 (4)12" x 35" x 3/8" (316x900x10 mm) 155 (14) 78 (7) 46 (4)17" x 26" x 3/8" (435x659x10 mm) 174 (16) 87 (8) 52 (5)23" x 23" x 3/8" (596x596x10 mm) 198 (18) 99 (9) 59 (5)23" x 47" x 3/8" (596x1200x10 mm) 264 (24) 132 (12) 79 (7)32" x 32" x 3/8" (800x800x10 mm) 265 (25) 132 (12) 79 (7)7" x 26" x 3/8" (180x659x10 mm) 94 (9) 47 (4) 28 (2)8" x 47" x 1/4" (193x1200x10 mm) 110 (10) 55 (5) 33 (3)Mosaics 48 (4)

epotech crystal



epotech crystal is an epoxy putty for grouting tile joints. Two-component putty with a translucent �nish. It re�ects the colour of the tile or mosaic surrounding the joint. It features all the properties of epoxy putties: watertightness, high resistance to chemicals and mechanical properties. Specially recommended for application on mosaics and ceramic tiles with relief. Extra �ne, micro grain porcelain grout.

This material is suitable for grouting joints up to 5 mm in �oor and wall tiles indoors. Excellent resistance to chemicals in high concentrations. Suitable for permanently damp environments.

epotech crystal

Features:

• Extra �ne, micro grain porcelain grout.• Easy to apply and clean epoxy putty.• Translucent appearance.• High resistance to most acids and alkali, even in high concentrations.• Waterproof joint, no water absorption.• Excellent adherence and mechanical resistance.• Prevents the development of fungi and bacteria.• Tile joints up to 5 mm.

Recommended use:

• Wall and �oor tiles with minimum joint.• Indoor �oor and wall tiles.• Mosaic or natural stone wall coverings.• Wall tiles and mosaics with glass elements.• Par-ker �oor coverings.• Technical, porcelain �oor coverings.

Substrates:


Materials:

• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Wall tiles and mosaics with glass elements.• Natural stone and marble not prone to staining.

Before applying epotech crystal on any ceramic �oor not included in the list above, carry out a prior test or check with the Technical Department at butech.

KEA SAPB42562025 100126899 crystal

Presentation Packaging3 kg can 650 lb/palet

Packaging

epotech crystal

glassmosaic

recti�ed ceramic

Par-ker shower trays outdoors

Outdoor �oors

technical porcelain

tiles

TILE SIZE GROUT JOINT WIDTHCoverages in sq.ft. (m2) per 8 lbs. (6.6 kg)

Width x Length x Thickness 1/16" (1.5 mm)

3/32” (2.5 mm)

1/8" (3 mm)

3/16" (4.5 mm)

1" x 1" x 1/4" (25x25x6 mm) 23 (2) 14 (1) 11 (1) 7 (1)2" x 2" x 1/4" (50x50x6 mm) 45 (4) 27 (2) 23 (2) 14 (1)3" x 3" x 1/4" (75x75x6 mm) 68 (6) 41 (4) 34 (3) 23 (2)8" x 12" x 3/8" (200x316x10 mm) 134 (12) 80 (7) 67 (6) 44 (4)12" x 12" x 3/8" (316x316x10 mm) 173 (16) 103 (9) 87 (8) 58 (5)12" x 18" x 3/8" (316x446x10 mm) 203 (19) 122 (11) 102 (9) 68 (6)12" x 23" x 3/8" (316x596x10 mm) 226 (21) 136 (13) 113 (10) 75 (7)18" x 18" x 3/8" (446x446x10 mm) 245 (23) 146 (13) 122 (11) 82 (8)12" x 35" x 3/8" (316x900x10 mm) 257 (24) 162 (15) 128 (12) 85 (8)17" x 26" x 3/8" (435x659x10 mm) 287 (26) 172 (16) 144 (13) 96 (9)23" x 23" x 3/8" (596x596x10 mm) 327 (30) 195 (18) 164 (15) 109 (10)23" x 47" x 3/8" (596x1200x10 mm) 440 (40) 263 (24) 219 (20) 146 (13)32" x 32" x 3/8" (800x800x10 mm) 440 (40) 263 (24) 219 (20) 146 (13)7" x 26" x 3/8" (180x659x10 mm) 155 (14) 92 (8) 78 (7) 51 (5)8" x 47" x 1/4" (193x1200x10 mm) 182 (17) 109 (10) 91 (8) 60 (6)

Mosaics 39 (3)

76 77

EPOTECH

EPOTECH CRYSTAL GOLD AND SILVER

epotech



epotech is an epoxy putty for grouting tile joints. Waterproof, two-component epoxy putty with outstanding chemical and mechanical properties. Specially recommended for tile joints requiring the highest mechanical and chemical properties.

This material is suitable for grouting joints from 3 to 15 mm · 1/8” to 5/8” in �oor and wall tiles, indoors and out. Excellent resistance to chemicals in high concentrations. Suitable for pools and permanently damp environments. Suitable as high adherence grouting material for ceramic tiles with any absorption level and format, for glass mosaic or natural stone.

epotech

Features:

• Two-component colored epoxy putty.• Excellent joint colour stability.• High resistance to most chemicals and alkali, even in high concentrations.• Waterproof joint, no water absorption.• Excellent adherence and mechanical resistance.• Tile joints from 3 to 15 mm · 1/8” to 5/8” .

Recommended use:

• Wall tiles with special chemical resistance.• Chemical and food industry and premises subject to thorough cleaning.• Pools and permanently damp environments, Turkish baths and spas.• High tra�c and outdoor �oors.• High adherence grouting material. Specially recommended. - Slate and natural stone. - Mesh backed glass mosaic.

Substrates:


Materials:

• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Natural stone and marble not prone to staining.

Presentation Europallet11 lb can 825 lb/palet11 lb can 825 lb/palet11 lb can 825 lb/palet11 lb can 825 lb/palet

Packaging

epotech

kitchencountertops

industrialkitchens

chemicalindustry

foodindustry

shower traysshowers

pools

Industries and laboratories


EN 13888 RG

KEA SAPB42562001 100004371 whiteB42562002 100004372 manhattanB42562005 100004373 anthraciteB42562009 100007815 ivory

B35200002 100113684 epoxy cleaning kit


Coverage


Width x Length x Thickness 1/8” (3 mm) 1/4” (6 mm) 3/8” (10 mm)1" x 1" x 1/4" (25x25x6 mm) 14 (1) 7 (0,5) 4 (0,2)2" x 2" x 1/4" (50x50x6 mm) 28 (2) 14 (1) 8 (0,5)3" x 3" x 1/4" (75x75x6 mm) 41 (4) 21 (2) 12 (1)8" x 12" x 3/8" (200x316x10 mm) 81 (8) 41 (4) 24 (2)12" x 12" x 3/8" (316x316x10 mm) 105 (10) 52 (5) 31 (3)12" x 18" x 3/8" (316x446x10 mm) 123 (11) 61 (6) 37 (3)12" x 23" x 3/8" (316x596x10 mm) 137 (13) 68 (6) 41 (4)18" x 18" x 3/8" (446x446x10 mm) 148 (14) 74 (7) 44 (4)12" x 35" x 3/8" (316x900x10 mm) 155 (14) 78 (7) 46 (4)17" x 26" x 3/8" (435x659x10 mm) 174 (16) 87 (8) 52 (5)23" x 23" x 3/8" (596x596x10 mm) 198 (18) 99 (9) 59 (5)23" x 47" x 3/8" (596x1200x10 mm) 264 (24) 132 (12) 79 (7)32" x 32" x 3/8" (800x800x10 mm) 265 (25) 132 (12) 79 (7)7" x 26" x 3/8" (180x659x10 mm) 94 (9) 47 (4) 28 (2)8" x 47" x 1/4" (193x1200x10 mm) 110 (10) 55 (5) 33 (3)Mosaics 48 (4)


EN 13888 RG

epotech gold & silver



epotech gold & silver is an epoxy putty for grouting tile joints. Two-component putty plus metal flakes featuring a unique, glossy finish. It features all the properties of epoxy putties: watertightness, high resistance to chemicals and mechanical properties. Specially recommended for application on mosaics and ceramic tiles with relief.

This material is suitable for grouting joints up to 5 mm in �oor and wall tiles indoors. Excellent resistance to chemicals in high concentrations. Suitable for permanently damp environments.

epotech gold & silver

Features:

• Two-component epoxy putty plus golden or silver metallic additive.• Easy to apply and clean. • High resistance to most chemicals and alkali, even in high concentrations.• Waterproof joint, no water absorption.• Excellent adherence and mechanical resistance.• Prevents the development of fungi and bacteria.• Tile joints up to 5 mm.

Recommended use:

• Wall and �oor tiles with decorative, metallic �nish.• Indoor wall and �oor tiles.• Damp environments.• Tile joints with uniform colour and shade, resistant to the passing of time.

Substrates:


Materials:

• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Natural stone and marble not prone to staining.

Before applying epotech gold & silver on metallic profiles or wall tiles with special glazes, carry out a prior test or check with the Technical Department at butech.

Bath environments

Packaging

epotech goldKEA SAPB42562021 100121692 gold

Presentation Europalet3 kg can 650 lb/palet

Packaging

epotech silverKEA SAPB42562022 100121693 silver

Presentation Europalet3 kg can 650 lb/palet

Glass mosaic Mosaic-like tiles Recti�ed ceramics

Special glazes Shower Trays Outdoors

TILE SIZE GROUT JOINT WIDTHCoverages in sq.ft. (m2) per 8 lbs. (6.6 kg)

Width x Length x Thickness 1/16" (1.5 mm)

3/32” (2.5 mm)

1/8" (3 mm)

3/16" (4.5 mm)

1" x 1" x 1/4" (25x25x6 mm) 23 (2) 14 (1) 11 (1) 7 (1)2" x 2" x 1/4" (50x50x6 mm) 45 (4) 27 (2) 23 (2) 14 (1)3" x 3" x 1/4" (75x75x6 mm) 68 (6) 41 (4) 34 (3) 23 (2)8" x 12" x 3/8" (200x316x10 mm) 134 (12) 80 (7) 67 (6) 44 (4)12" x 12" x 3/8" (316x316x10 mm) 173 (16) 103 (9) 87 (8) 58 (5)12" x 18" x 3/8" (316x446x10 mm) 203 (19) 122 (11) 102 (9) 68 (6)12" x 23" x 3/8" (316x596x10 mm) 226 (21) 136 (13) 113 (10) 75 (7)18" x 18" x 3/8" (446x446x10 mm) 245 (23) 146 (13) 122 (11) 82 (8)12" x 35" x 3/8" (316x900x10 mm) 257 (24) 162 (15) 128 (12) 85 (8)17" x 26" x 3/8" (435x659x10 mm) 287 (26) 172 (16) 144 (13) 96 (9)23" x 23" x 3/8" (596x596x10 mm) 327 (30) 195 (18) 164 (15) 109 (10)23" x 47" x 3/8" (596x1200x10 mm) 440 (40) 263 (24) 219 (20) 146 (13)32" x 32" x 3/8" (800x800x10 mm) 440 (40) 263 (24) 219 (20) 146 (13)7" x 26" x 3/8" (180x659x10 mm) 155 (14) 92 (8) 78 (7) 51 (5)8" x 47" x 1/4" (193x1200x10 mm) 182 (17) 109 (10) 91 (8) 60 (6)

Mosaics 39 (3)

78 79

ab

self-leveling spacers

Leveling system for ceramic tiles.


Leveling system for ceramic tiles. Eases ceramic tile laying and guarantees a perfectly �at surface of the �nal installation. The system consists of a new type of spacer with adjustable height that levels the surrounding tiles and prevents them from moving. Specially recommended when tile, design or use features demand a perfect �nish, with an even, seamless surface.

self-leveling spacers

Features:

• Guarantees tiles are even.• Prevents tiles from moving due to laying errors or due to mortar setting.• Reduces retouching and laying times.

• Suitable for 1,5-3 mm · 1/32” - 1/8” wide joints.• Suitable for tiles 5 to 16 mm · 3/16” to 5/8” thick.• The system consists of a spacer, a wedge and an adjusting tool.• Wedges are recoverable, only the spacers are consumed.

Recommended use:

• Wall and �oor tiles with minimum joint.• Large format �oor tiles.• Laying of recti�ed wall tiles.• Tiles with reduced thickness.• Interlocking �oor designs.• Glued façades.

Substrates:


Materials:

• All wall tiles and similar products laid with cement-based adhesives.• Thickness between 5 and 15 mm.

KEA SAPB83511063 100108031 wedgeB83511062 100108032 wedgeB83511056 100095383 wedge

B83511059 100108026 1 mm spacerB83511058 100108027 1 mm spacerB83511065 100108028 1 mm spacer



B83511072 100123264 supplementary lift piece

KEA SAPB83511064 100108034 1 mm spacer system kitB83511069 100109073 2mm spacer system kitB83511068 100109074 3mm spacer system kit

KEA SAPB83510071 100095386 pincers for self-leveling spacer

Presentation100 units/bag300 units/bag500 units/bag

100 units/bag300 units/bag500 units/bag



50 units/bag

PresentationKitKitKit

PresentationUnit

Packagingself-leveling spacers

urbatek ston-ker parker largeformat

recti�edceramics

minimumjoint

Coverage:


acm inches

19.3 8 5031.6 12 40 33

33 13 50 29 2840 17 50 33 29 2544 18 44 30 25 22 20

59.6 23 37 25 21 19 17 1366 24 35 23 20 17 15 12 1180 32 34 23 20 17 15 11 11 990 35 31 20 17 15 14 10 9 8 7

100 39 30 20 17 15 13 10 9 8 7 6120 48 27 18 15 14 12 9 8 7 6 5 5

19.3 31.6 33 40 44 59.6 66 80 90 100 120 b (cm)8 12 13 17 18 23 24 32 35 39 48 b (inch.)

Large format �oors

80 81

Elastic joint sealants


S-107 n is a neutral silicone putty for sealing joints. Specially recommended for sealing movement joints. Indoor and outdoor use.,

This reticular putty in contact with dampness does not give o� odors, thus becoming an extraordinary elastic and resistant elastomer to atmospheric agents.

Features:

• Single-component neutral silicone.• High elasticity.• Good adherence.• Resistant to UV rays.• Frost-resistant.

Recommended use:

• Sealing joints even between materials sensible to chemical attack.• Sealing movement joints in �oors and walls.• Sealing joints in ceramics, glass, metal and plastics.• Sealing perimeter joints in wall tile coverings.• Gluing ceramic materials on wood boards.

Coverage:

• 2 x 2 mm · 5/64” x 5/64” joint 75.0 m · 245 feet• 3 x 3 mm · 1/8” x 1/8” joint 33.3 m · 110 feet• 5 x 3 mm · 3/16” x 1/8” joint 20.0 m · 65 feet• 5 x 5 mm · 3/16” x 3/16” joint 12.0 m · 40 feet• 8 x 4 mm · 5/16” x 5/32” joint 8.3 m · 27 feet

Substrates:


Materials:

• Ceramic tiles and glass mosaic.• Glass.• Metal.• Plastic material, PVC.• Concrete slabs.• Wood.

KEA SAPB82302001 100005814 s-107 n blancoB82302002 100005815 s-107 n transparenteB82302003 100005816 s-107 n grisB82302004 100005817 s-107 n blackB82600026 100115950 s-107 n beige

Presentation Packaging300 ml cartridge 25 cartridges x box300 ml cartridge 25 cartridges x box300 ml cartridge 25 cartridges x box300 ml cartridge 25 cartridges x box

Packaging

mortar ceramics glass metal movementjoint

outdoor

s-107



S-107 is an acetic silicone putty for sealing joints. Specially recommended for sealing joints in bathrooms and for sealing perimeter joints in wall tile coverings. Indoor use.

This reticular putty in contact with dampness gives o� acetic acid, thus becoming an extraordinary elastic and resistant elastomer to atmospheric agents.

s-107

Features:

• Single-component acetic silicone.• High elasticity.• Good adherence.• Resistant to UV rays.• Maximum application thickness, 30 mm.

Recommended use:

• Sealing joints in ceramics, glass, metal, plastics and painted surfaces.• Sealing perimeter joints in wall tile coverings.• Gluing ceramic materials on wood boards.

Coverage:

• 2 x 2 mm · 5/64” x 5/64” joint 75.0 m · 245 feet• 3 x 3 mm · 1/8” x 1/8” joint 33.3 m · 110 feet• 5 x 3 mm · 3/16” x 1/8” joint 20.0 m · 65 feet• 5 x 5 mm · 3/16” x 3/16” joint 12.0 m · 40 feet• 8 x 4 mm · 5/16” x 5/32” joint 8.3 m · 27 feet• 8 x 6 mm · 5/16” x 1/4” joint 6.2 m · 20 feet

Substrates:

• Do not use on substrates which are sensible to the action of acids: - Screeds and �oors with cement mortar. - Concrete.

Materials:

• Ceramic tiles and glass mosaic.• Glass.• Plastic material.• Do not use with materials which are sensible to the action of acids, like marble or

other natural stones.

KEA SAPB82301004 100005811 s-107 blancoB82301005 100005812 s-107 transparenteB82301006 100005813 s-107 gris

Presentation Packaging300 ml cartridge 25 cartridges x box300 ml cartridge 25 cartridges x box300 ml cartridge 25 cartridges x box

Packagings-107

mortar ceramics glass metal jointjoint

outdoor

Elastic jointsElastic joints

s-107 n

s-107 n

s-107 n

Coverage(feet/cartridge) joint width (in) x joint depth (in)

1’5= Coverage

(feet/cartridge) joint width (in) x joint depth (in)

1’5=

82 83

p-404



p-404 is polyurethane putty for sealing joints. Specially recommended for sealing movement joints outdoors. Indoor and outdoor use.,

This reticular putty in contact with dampness does not give o� odors, thus becoming an extraordinary adherent, elastic and resistant elastomer to atmospheric agents.

p-404

Features:

• Single-component polyurethane putty.• High elasticity.• High adherence.• Resistant to UV rays.• Frost-resistant.

Recommended use:

• Sealing joints even between materials sensible to chemical attack.• Sealing movement joints in �oors and walls.• Bonding of building materials like ceramics, concrete, roof tiles, wood, alumi-

num, polyester or PVC.• Gluing ceramic materials on metal or wood boards.• Gluing Concept XPS panels.

Coverage:

• 2 x 2 mm · 5/64” x 5/64” joint 75.0 m · 245 feet• 3 x 3 mm · 1/8” x 1/8” joint 33.3 m · 110 feet• 5 x 3 mm · 3/16” x 1/8” joint 20.0 m · 65 feet• 5 x 5 mm · 3/16” x 3/16” joint 12.0 m · 40 feet• 8 x 4 mm · 5/16” x 5/32” joint 8.3 m · 27 feet• 8 x 6 mm · 5/16” x 1/4” joint 6.2 m · 20 feet

Substrates:


Materials:

• Ceramic tiles and glass mosaic.• Glass.• Metal.• Plastic material, PVC.• Concrete slabs.• Wood.• Concept XPS panels.

KEA SAPB82401001 100005818 p-404 blancoB82401002 100005819 p-404 grisB82401003 100005820 p-404 black

Presentation Packaging310 ml cartridge 25 cartridges x box310 ml cartridge 25 cartridges x box310 ml cartridge 25 cartridges x box

Packagingp-404

mortar ceramics glass metal jointjoint

outdoor

cl-stuk

Additive for grouting material


cl-stuk is a latex which mixed with cement-based grouts like colorstuk n, reduces water absorption and enhances mechanical resistance and deformability. Specially recommended when laying ceramic outdoors and in permanently damp environments.

A latex additive that can be mixed with the colorstuk range of high-tech grout mortars in cases when increased mechanical resistance, reduced water absorption or improved �exibility is required.

cl-stuk

Features:

• Water-based acrylic resins latex.• Resistant to the most common chemicals.• It reduces mortar water absorption.• It enhances the adherence and deformability of the grouting material.• It increases resistance to abrasion.• Excellent resistance to UV rays and the e�ect of heat.• Frost-resistant.

Recommended use:

Specially recommended in:• Outdoor �oor and wall tiles.• High tra�c �oor tiles.• Floor tiles on radiant heating.• Pools and damp environments.It enhances grouting material performance in:• Indoor wall tile coverings. Specially recommended for recti�ed tiles.• Indoor �oor tiles, including public buildings.

Substrates:


Materials:

Specially recommended in:• Wall tiles with mosaic-like patterns.• DQS slabs and other kinds of marble agglomerate.It enhances grouting material performance in:• Absorbent and non-absorbent ceramic tiles, including porcelain tiles.• Glass mosaic.• Natural stone and marble not prone to staining.

KEA SAPB51201001 100004374 cl-stukB51501001 100004375 cl-stuk

Presentation Packaging2 kg can - 4.4 lb can 985.6 lb/palet5 kg can - 11 lb can 1056 lb/palet

Packagingcl-stuk

�oors glassmosaic

radiantheating

hightra�c

pools façades

Coverage:

Product % liters / galons Kg/bag - lb/bag

Colorstuk 0-4 n white 34% 1.6-1.8 / 0.35-0.39 5 - 11

Colorstuk 0-4 n white 34% 8.2 - 8.8 / 1.8 - 1.9 25 - 55

Colorstuk 0-4 n colour 26% 1.2 - 1.4 / 0.26 - 0.30 5 - 11

Colorstuk 0-4 n colour 26% 6.4 - 6.6 / 1.4 - 1.45 25 - 55

Colorstuk 2-12 n 20% 0.9 - 1.1 / 0.2 - 0.24 5 - 11

Colorstuk 2-12 n 20% 4.8 - 5.2 / 1.06 - 1.15 25 - 55

Colorstuk especial n 32.5% 0.65 / 0.14 2 - 4.4

Outdoor �oors

Elastic joints

Coverage(feet/cartridge) joint width (in) x joint depth (in)

1’5=

84

Mortar additiveunicem

Self-leveling mortarslevel 1 nlevel 1 prolevel 3

Primeruniprimsuper-prim

Cleaning productsacid netbasic gelacid net +acid net 1Lbasic gel 1Lporce-cleancolorstuk cleanerepotech cleanercolorstuk sealernon slip tile

86

878889

9091

92939494949595959696

Substrate preparationproducts

8786

unicem

Mortar additive

unicem is a latex that enhances the overall mechanical performance of cement-based mortars. Specially recommended for cement rendering, �oor screeds and other applica-tions in outdoor environments.

It guarantees increased waterproof protection, cohesion, reduced deformability and resistance to atmospheric agents of cement-based substrates. Recommended for intermediate bond coats between mortars.

unicem

Features:

• Water dispersion synthetic resins latex.• Excellent resistance to dampness.• Good deformability.• Excellent resistance to UV rays and the e�ect of heat.• Frost-resistant.

Recommended use:

• Outdoor wall and �oor tiles. Specially recommended in facades• Floor tiles on radiant heating.• High tra�c �oor tiles.• Pools and environments with a strong water presence.• Making of fully bonded screeds.

Substrates:

• Stable structures.


Materials:

• All wall tiles and similar products to be laid with cement-based adhesives.


level 1 n

Self-leveling mortars

Features:

• Compressive strenght ≥ 30 N/mm2

• Flexural strenght ≥ 7 N/mm2

• Single-component, self-leveling mortar.• Excellent adherence. Flexible.• Application thickness between 2 and 10 mm.• Easy application with a straight edge trowel or scraper.• Indoor use.• Mixing water: 5,75 l per 23 kg bag

Recommended use:

• Substrate regularization in refurbishing jobs.• Indoor large format �oor tile coverings.• Indoor large format recti�ed �oor tile coverings.• Indoor �oor tile coverings with a 1 mm joint.• Floor tiles with radiant heating.

Priming:

• Cement-based substrate, previously apply uniprim.• Glazed ceramic tiles, previously apply super-prim.

Materials:

• Large format ceramics.• Porcelain tiles with a water absorption < 0.5% as per EN-ISO 10545-3.• Glass mosaic.• Natural stone and marbles.


KEA SAPB51603002 100004378 unicemB51604002 100004379 unicem

Presentation Europallet5 kg can 1058 lb/palet20 kg can 1234 lb/palet

Packagingunicem

intermediatebond coat

�oor tileoutdoor

radiantheating

hightra�c

pools facades

Coverage:

Substrate Coverage

Mortar screed

• < 10 mm 150 gr/m2 and thickness millimeter

• 10-35 mm 50 gr/m2 and thickness millimeter

• > 35 mm 30 gr/m2 and thickness millimeter

Mortar rendering 70 gr/m2 and thickness millimeter

Bond coat 200 - 300 gr/m2

Facades

level 1 n is a fast hardening, self-leveling mortar for leveling and regularizing sub-strates for all kinds of floor tiles. 2 to 10 mm thickness. Specially recommended for laying ceramic �oor tiles with a minimal joint indoors.

It is formulated for creating 2 to 10 mm �oor substrates. It features good workability, fast-setting times, and a high mechanical performance. It allows to prepare �oors well levelled, for a correct and quick �xing of recti�ed ceramic tiles


EN 13813 CT C30-F7

Coverage:

Substrate Coverage

Self-leveling �oors 1,4 kg/m2 and thickness millimeter


ston-ker largeformat

radiantheating

ceramicsceramics

ceramicsexisting

outdoor

level 1 n

KEA SAPB15901002 100048841 level 1 n

Presentation Europallet23 kg bag 2028 lb/palet

Packaginglevel 1 n

8988

level 1 pro


level 1 pro is a fast hardening, self-leveling mortar for leveling and regularizing substrates for all kinds of �oor tiles. 2 to 10 mm thickness. Specially recommended for laying recti�ed ceramic �oor tiles.


level 1 pro

Features:

• Single-component, self-leveling mortar.• Excellent adherence. • Fast hardening. Ready for tra�c in 4-5 hours.• Application thickness between 2 and 10 mm.• Easy application with a straight edge trowel or scraper. Pumpable.• Indoor use.• Mixing water. 6.0 l per 25 kg bag.

Recommended use:

• Substrate regularization in refurbishing jobs.• Indoor large format ceramic �oor tile coverings.• Indoor recti�ed �oor tile coverings.• Indoor �oor tile coverings with a 1 mm joint.• Laminate �oating �oors.• Synthetic �oors and carpet.• Do not use in outdoor �oors.

Primer:

• For cement-based, concrete or anhydrite substrates, �rst apply uniprim.• For existing ceramic substrates, �rst apply super-prim.


EN 13813 CT-C20-F5

Materials:

• Large format ceramics.• Porcelain tiles with a water absorption < 0.5% as per EN-ISO 10545-3.• Natural stone and marble not prone to staining.• Laminate �oors and parquet.


Packaginglevel 1 pro




Features:

• Compressive strenght ≥ 25 N/mm2

• Flexural strenght ≥ 5 N/mm2

• Single-component, self-leveling mortar.• Excellent adherence. Flexible.• High �bre content.• Application thickness between 3 and 30 mm.• Easy application with a straight edge trowel or scraper.• Indoor use.• Mixing water: 4.25 – 4.50 l per 25 kg bag

Recommended use:

• Indoor large format �oor tile coverings.• Indoor large format recti�ed �oor tile coverings.• Indoor �oor tile coverings with a 1 mm joint.• Floor tiles with radiant heating.

Priming:

• Cement-based substrate, previously apply uniprim.• Glazed ceramic tiles and wood substrates, previously apply super-prim.

Materials:

• Large format �oor tiles.• Porcelain tiles (water absorption < 0.5% as per EN-ISO 10545-3).• Natural stone and marbles.•


level 3

level 3 is a fast hardening, self-leveling mortar with �bre for leveling and regularizing substrates for all kinds of �oor tiles. 3 to 30 mm thickness. Specially recommended for laying ceramic �oor tiles with a minimal joint indoors.


level 3


EN 13813 CT C25-F5

KEA SAPB15901004 100104577 level 3

KEA SAPB15901005 100141151 level 1 pro


Packaginglevel 3

Coverage:

Substrate Coverage

Self-leveling �oors 1,4 kg/m2 and thickness millimeter



woodceramicsceramics

ceramicsexisting

outdoor

Coverage:Substrate Coverage

Self-leveling �oors 1.4 kg per m2 and thickness millimeter


radiantheating

ceramicsceramics

ceramicsexisting

outdoor

90 91

KEA SAPB52501001 100004384 uniprimB52601001 100004387 uniprim

Presentation Europallet5 kg can 1058 lb/pallet20 kg can 1234 lb/pallet

Packaginguniprim

Coverage:

Substrate Coverage

Anhydrite/plaster substrate 100 - 200 gr/m2

mortar concrete wood untiled �ooranhydrite

plasterboard

plasteredwall

Plaster substrates

uniprim

Primer

uniprim is a water-based primer made of synthetic resins for the insulation of plaster, anhydrite and molding plaster substrates, prior to the use of cement-based adhesives. It reduces water absorption and improves the consistency of cement-based substrates

C2-type cement-based adhesives can be used to lay ceramic tiles quickly and e�ciently on plaster, anhydrite and molding plaster substrates. It reduces the level of absorption of highly absorbent substrates, preventing cement-based adhesives from drying out too quickly and thus ensuring that they set properly. Priming prior to the application of self-leveling mortars on absorbent substrates, avoiding the appearance of bubbles or cracks because of a fast drying.

uniprim

Features:

• Water-based synthetic resins primer.• Once dry, it leaves a �lm over the substrate, which in plaster-based substrates

prevents contact and chemical reaction with cement-based adhesives. It prevents ettringite buildup.

• It reduces substrate water absorption.• It improves the bonding material setting time.• It increases cohesion of the substrate.• Easy application with a paint roller or a wide paintbrush.• Indoor and outdoor use.,

Recommended use:

• Wall tiles on plaster or molding plaster substrates.• Floor tiles on anhydrite substrates.• Ceramic tiles on cement-based substrates with weak consistency.• Reinforcement of self-leveling mortars.

Substrates:

• Plasterboards and plastered walls.• Anhydrite �oor coverings.• Cement-based substrates with high water absorption. • Plasterboards.• Untreated partition walls for laying tiles.

Materials:



super-prim

Primer

superprim is a water-based acrylic resin primer with silica arids, used for preparing substrates prior to using adhesives, self-leveling mortars and mortar screeds. It reduces water absorption and improves the consistency of cement-based substrates. Professional use.

super-prim

Features:

• Water-based, acrylic resin latex with silica arids.• It enhances the adherence of cement mortars on glazed wall coverings.• It improves the bonding material setting time.• It reduces substrate water absorption.• It increases cohesion of the substrate.• Easy application with a paint roller or a wide paintbrush. Can be applied with

airless spray.• Indoor and outdoor use.• Do not dilute with water or mix with any other liquids.

Recommended use:

• Primer for self-leveling mortars on highly absorbent or existing ceramic tile coverings.

• Ceramic tiles on cement-based substrates with weak consistency or existing ceramic tile coverings.

• Ceramic floor coverings on anhydrite substrates or ceramic wall coverings on plaster or molding plaster.

• Mortar screeds on brick partition walls or concrete block walls.• Mortar screeds on ceramic tile or natural stone �oors.• Do not use in substrates subject to dampness increases.

Substrates:

• Ceramic brick partition walls.• Cement covered �oors and walls.• Concrete slabs and aerated concrete blocks.• Anhydrite-covered �oors and plastered walls.• Indoor ceramic �oor and wall tiles. • Indoor wood boards.• Indoor metal sheets.

Materials:


KEA SAPB57500002 100123220 super-prim

Presentation Europallet10 kg can 1058lb /pallet

Packaging

Primer for self-leveling mortars


mortar plaster or anhydrite

existing ceramics

wood metal self-leveling mortar

Coverage:

Substrate Coverage

Non absorbent 200 - 250 gr/m2

Absorbent 250-300 gr/m2

92 93


CAS No.: 1310-73-2Phrases: R-34 S2 , S26 , S36/37/39 , S45Danger symbols: C

KEA SAPB31201001 100004341 basic gelB31501001 100004346 basic gel

Presentation Europallet2 kg can 987 lb / palet5 kg can 1058 lb/ palet

Packagingbasic gel

*Given the wide variety of ceramic materials, we recommend to check with your tile provider about chemical resistance to alkali attack.


glassmosaic

naturalmarble

specialglazes

Coverage:

Dilution

1 : 1 with clear water 85-100 gr/m2


Floor etching

acid net

Cleaning products

acid net is an acid detergent for cleaning ceramic �oor and wall tiles. Specially recom-mended for cleaning building debris. Indoor and outdoor use.

It is an acid solution that in contact with cement reacts and removes dirt or stains with-out damaging coverings or cement based joints like colorstuk. Suitable for removing saltpetre remains or dirt sensible to acid attack.

acid net

Features:

• Acid solution.• Colorless liquid.• pH < 0.1• Viscosity: 5.0 - 8.0 cp at 20ºC• Recommended action time: 10-15 min.

Recommended use:

• Building site �nal cleaning.• Cleaning of remains of adhesives and cement-based grouting materials in �oor

and wall tiles.• Cleaning of e�orescences and salts remains.• Cleaning of lime remains and �lm.• Cleaning of glazed substrates prior to laying new tiles.

Substrates:

• Do not apply directly on: -Cement covered �oors and walls . - Concrete slabs.


CAS No.: 7664-38-2Phrases: R-34 S2 , S26 , S36/37/39 , S45Danger symbols: C

Materials:

• Ceramic glazed and non-glazed tiles GLA, ULA.• Glass mosaic.• Natural stones resistant to acid descalers.• It is not recommended to use acid net in materials sensible to acid cleaners like: - Marbles and natural limestones. - Ceramic tiles with surface �nishes sensible to acid attack, like polished or metallic �nishes.


basic gel

Cleaning products

basic gel is a concentrated alkaline detergent developed for cleaning ceramic tiles in general. Specially recommended for removing wax, varnish and other surface treat-ments. Indoor and outdoor use.

It is a basic pH remover, made from speci�c detergents ans alkaline agents that provide it with excellent proprieties for removing common dirt, without damaging coverings or cement based joints like colorstuk.

basic gel

Features:

• Alkaline solution.• Slightly red liquid.• pH > 12.5• Recommended action time: 10-15 min.

Recommended use:

• Regular cleaning of ceramic wall tiles.• Cleaning of remains of wax, oil or grease from �oor and wall tiles .• Cleaning of glazed substrates prior to laying new tiles.

Substrates:


Materials:

• Ceramic glazed and non-glazed tiles GLA, ULA.• Glass mosaic.• Natural stones resistant to alkaline detergents.• Stones without arti�cial treatment.Given the wide variety of ceramic materials, we recommend to check with your tile provider about chemical resistance to alkaline acids before using basic gel. In any case, we recommend to perform a preliminary test.


*Given the wide variety of ceramic materials, we recommend to check with your tile provider about chemical resistance to acid attack.

KEA SAPB31202002 100004342 acid netB31502002 100004347 acid net

Presentation Europallet2 kg can 987 lb/ palet5 kg can 1058 lb/ palet

Packagingacid net

Coverage:

Dilution




1 : 5 with clear water 20 gr/m2


glassmosaic

natural specialglazes

Building site cleaning

94 95

Cleaning productsCleaning products

acid net + is a concentrated descaler for cleaning ceramic �oor and wall tiles. Specially recommended for cleaning building debris. Indoor and outdoor use.

Neutral detergent for cleaning ceramic and natural stone �oor coverings. High degreas-ing power for a deep and perfect cleaning. Fast drying. Indoor and outdoor use.

acid net is an acid detergent for cleaning ceramic floor and wall tiles. It dissolves all kinds or cement debris without damaging coverings or cement based joints like colorstuk.

Cleaner for cement based grouts. It removes dirt build-up and recovers the grout's orig-inal colour. Specially recommended for maintenance of joints sealed with colorstuk.

Concentrated alkaline detergent developed for cleaning ceramic tiles in general. terra-cotta and antiqued marble. It removes all kinds of oils, varnishes, paints, wax and home stains. Specially e�ective for etching former treatments.

Water-based detergent for cleaning epoxy putties remains and stains. Specially recom-mended for cleaning remains of epotech aqua. Professional use.

acid net + porce-clean

acid net 1L colorstuk cleaner

basic gel 1L epotech cleaner

Recommended use:

• Building site �nal cleaning.• Cleaning of remains of adhesives and cement-based grouting materials in �oor

and wall tiles.• Cleaning of e�orescences and salts remains.• Cleaning of plaster remains and plaster-based remains.• Cleaning of lime remains and �lm.• Cleaning of glazed substrates prior to laying new tiles.

Recommended use:

• Regular cleaning of ceramic wall tiles.• Cleaning of remains of wax, oil or grease from �oor and wall tiles .

Recommended use:

• Cleaning of remains of adhesives and cement-based grouting materials in �oor and wall tiles.

• Cleaning of e�orescences and salts remains.• Cleaning of plaster remains and plaster-based remains.• Cleaning of lime remains and �lm.• Cleaning of glazed substrates prior to laying new tiles.

Recommended use:

• Cleaning of cement based joints stained with dust and dirt.• Recovering the colour in cement based tiling joints.

Recommended use:

• Intensive cleaning of ceramic wall tiles.• Cleaning of remains of wax, oil or grease from �oor and wall tiles .• Cleaning of glazed substrates prior to laying new tiles.

Recommended use:

• Cleaning of epoxy putties remains and �lms on ceramic tiles, glass mosaics and natural stones.

Coverage:Dilution 1: 1 with clear water 10 ml/sqft

Dilution 1: 2 with clear water 5 ml/sqft

Coverage:10 l of clean water 10-20 ml/sqft



Coverage for 2 mm joint.Tile 200 x 316 cm 215 sqft/packageTile 316 x 596 cm 350 sqft/packageTile 316 x 900 cm 395 sqft/packageTile 446 x 446 cm 375 sqft/packageTile 446 x 660 cm 450 sqft/packageTile 596 x 596 cm 200 sqft/package



Coverage for 2 mm joint.Tile 200 x 316 cm 215 sqft/packageTile 200 x 446 cm 320 sqft/packageTile 316 x 596 cm 350 sqft/packageTile 316 x 900 cm 395 sqft/package

KEA SAP P/EU B35200004 100120424 acid net + 11.41 p/u

Presentation Box1000 ml bottle 12 bottles

Packagingacid net +

KEA SAP P/EUB35200003 100120423 acid net 9.51 p/u


Packagingacid net 1L

KEA SAP P/EUB35200005 100120425 basic gel 1000 ml 11.33 p/u


Packagingbasic gel 1L

KEA SAP P/EUB35200008 100120431 porce-clean 8.47 p/u


Packagingporce-clean

KEA SAP P/EUB35200007 100120426 colorstuk cleaner 10.00 p/u

Presentation Box125 ml package 12 applicators

Packagingcolorstuk cleaner

KEA SAP P/EUB35200006 100120428 epotech cleaner 17.75 p/u


Packagingepotech cleaner

Before using any cleaning product, please perform a test or refer to the product's technical sheet.

*Given the wide variety of ceramic materials, glass mosaics and natural stones, we recommend to check with your tile provider about chemical resistance of the tiles before applying any cleaning product.



96 97

Glass mosaic Glazed ceramic tiles Porcelain

Remains of building work acid net + acid net + acid net +

Cement acid net acid net acid net

Gypsum acid net acid net acid net

Epoxy putty epotech cleaner epotech cleaner epotech cleaner

Remains of sillicone Vitroceramic scraper + Acetone

Vitroceramic scraper + Acetone

Vitroceramic scraper + Acetone

E�orescence acid net acid net acid net

Moss Bleach Bleach Bleach

Daily maintenance porce-clean porce-clean porce-clean

Food porce-clean porce-clean porce-clean

Co�ee, juices, sodas basic gel basic gel basic gel

Lemon, vinegar basic gel basic gel basic gel

Rust stains acid net acid net acid net

Urine and vomit acid net acid net acid net

Merbromin Hydrogen peroxide Hydrogen peroxide Hydrogen peroxide

Iodine dye Hydrogen peroxide Hydrogen peroxide Hydrogen peroxide

Blood stains Hydrogen peroxide Hydrogen peroxide Hydrogen peroxide

Oil, fat basic gel basic gel basic gel

Motor oil basic gel basic gel basic gel

Tar Acetone Acetone Acetone

Paint, varnish, markers Acetone Acetone Acetone

Adhesive and glue Acetone Acetone Acetone

Rubber tires Acetone Acetone Acetone

Waterproo�ng joints colorstuk sealer colorstuk sealer colorstuk sealer

Joints cleaner colorstuk cleaner colorstuk cleaner colorstuk cleaner

Anti-slip non-slip tile

Given the wide range of mosaics and ceramics, it is recommended to consult the supplier of tiles about the chemical resistance. In any case, it is recommended to take a test.

We recommend the use on cleaning polished tiles, also with metal �nish. Contact the supplier of tiles to know the che-mical resistance. In any case, you have to take a test.

Cleaning products


Cleaning products

Colorless, waterproof protector for cement based joints. It coats in depth and strength-ens the grout. It protects against water, oils and accidental spills. It eases the cleaning of joints as it reduces water absorption.

Non-slip treatment for glazed and unglazed ceramic tiles reducing the risk of slip and fall accidents. Indoor and outdoor use.

The non-slip treatment reacts with the ceramic tiles surface, generating thousands of microscopic bowls. These evenly distributed engravings increase the contact surface and, in the presence of water, produce a suction between the covering and the foot. This e�ect increases the coe�cient of friction and reduces the risk of slip and fall accidents.

colorstuk sealer

non-slip tile

Recommended use:

• Sealing and protection for cement based grouts.

Recommended use:

• Glazed and non-glazed ceramic �oor tile coverings. • Indoor and outdoor �oor tile coverings. • Built in shower trays.

• Do not apply on �bre shower trays and bathtubs.• Do not apply on materials which are sensible to acid attack, like limestones or

mortar substrates.

CoverageCeramic tile 20 ml/sqft

KEA SAP P/EUB87010002 100120427 colorstuk sealer 12.25 p/u

Presentation Box125 ml package 16 applicators

Packagingcolorstuk sealer

Coverage for 2 mm joint.Tile 200 x 316 cm 410 sqft/packageTile 316 x 596 cm 660 sqft/packageTile 316 x 900 cm 790 sqft/packageTile 446 x 446 cm 750 sqft/packageTile 446 x 660 cm 885 sqft/packageTile 596 x 596 cm 1000 sqft/package

KEA SAP P/EUB33601002 100120430 non slip tile 35.50 p/u


Packagingnon-slip tile



Waterproo�ngimperbandsylasticlinear drainsimperband USA kit

Decoupling and waterproo�nglamitech n

100101102104

106

Waterproo�ng

100 101

imperband

Waterproo�ng

imperband is a waterproof sheet, specially designed for indoor waterproofing of ceramic wall and �oor coverings.

It is a 0,5 mm · 3/64” thick polymer membrane with a double thermoplastic polyole�n sheet and covered on both sides by non woven polyester �bre that allow it to be bonded to surfaces using cement-based adhesives. Ideal for use in new construction and refur-bishment of showers and baths, and any indoor environment permanently a�ected by damp.

imperband

Features:

• Double thermoplastic polyole�n membrane covered on both sides by non woven polyester �bre.

• Maximum waterproo�ng with minimal thickness (0.5 mm - 3/64”).• Direct installation of the tile on the sheet.• Good chemical resistance.• Quick and easy application.

Recommended use:

• Private bathrooms. Built in showers.• Public toilets and showers.• Spas and premises in permanently damp environments.• Balconies and terraces smaller than 10 m2.• Do not use in outdoors surfaces greater than 10 m2.

Installation:

• imperband sheet is compatible with type C2 cement-based adhesive as per EN 12004.

• In case of surfaces bigger than the length of the sheet, overlap two 10 cm · 3/8”sheets and bond with C2 adhesive.

• In waterproo�ng of �oors, leave an excess of sheet of at least 10 cm · 3/8” in all the spots where �oor meets the wall.

• Be extremely cautious when connecting the sheet to the drainage systems. • Once the imperband sheet has been installed, cover with the chosen floor

covering. Never leave exposed to direct sunlight.

Substrates:

• Cement covered �oors and walls .• Concrete slabs.• Plasterboards.• Plywood boards.• On anhydrite or plaster substrates apply uniprim.


TCNA A.118.10

Materials:

• Absorbent and non-absorbent ceramic tiles. Porcelain tiles with a water absorp-tion < 0.5% as per EN-ISO 10545-3.

• Glass mosaic.• Natural stone and marble not prone to staining.

KEA SAPB84901001 100006213 imperbandB84901006 100006218 imperband

Presentation Europallet322.92 sqft 7750 sqft/pallet53.81 sqft 3228.6 sqft/pallet

Packagingimperband


Bath environments

bathenvironments

terraces new buildingwork

refurbishingbathrooms

ceramicshowers

pools

sylastic

Waterproo�ng

sylastic is a two-component cement-based waterproofer with excellent bonding and deformability features, specially recommended for waterproo�ng outdoors. Compatible with type C2 cement-based adhesive as per EN 12004. Indoor and outdoor use.

Prevents the need of screed between waterproofing sheet and ceramic floor, thus reducing the �nal system thickness. It is applied in two 1.5-2.5 mm · 1/16”-3/32” layers each, with a �berglass mesh reinforcement on the �rst application. Special pieces and bands available for waterproo�ng joints and other critical spots.

sylastic

Features:

• Two-component waterproo�ng mortar.• Indoor and outdoor waterproofer.• Maximum waterproo�ng with minimal thickness (3 mm).• It allows for direct laying of ceramic tiles with cement-based adhesive.• Excellent adherence and maximum deformability.• Good chemical resistance.• Suitable for direct contact with water.

Recommended use:

• Waterproo�ng of bathrooms and showers.• Spas and premises in permanently damp environments.• Outdoor terraces and balconies.• Pools and premises into direct contact with water.• Cisterns and reservoirs into direct contact with water.• Repair of cracked �oors and renderings.• Promotes adherence on existing ceramic wall tiles and on wood or metal sub-

strates.

Coverage:

Substrates:

• Cement covered �oors and walls .• Concrete slabs.• Plasterboards.• Wood boards.• Existing �oor tiles.• Metal sheets.

Materials:



KEA SAPB85900004 100072729 sylastic mortarB85900005 100072730 sylastic additive

B84900303 100006212 50 m �berglass mesh

B84905004 100006221 50 ml waterproof band

B84900101 100006210 outer angleB84900202 100006211 inner angle

sylasticPresentation Europallet

52.9 lb bag 2116 lb/palet17.6 lb can 704 lb/palet

538 sqft reel

164 feet roll

UnitUnit

Packaging

Bond coat:• One-layer application. 2,60 kg / m2 · 0.55 lb/sqft• Sylastic mortar 1,95 Kg / m2 · 0.40 lb/sqft• Sylastic additive 0,65 Kg / m2 · 0.14 lb/sqft

Waterproo�ng:• Two-layer application. 5,20 kg / m2 · 1 lb/sqft• Sylastic mortar 3,90 Kg / m2 · 0.80 lb/sqft• Sylastic additive 1,30 Kg / m2 · 0.27 lb/sqft

Mean thickness per sylastic layer: 1.5 mm

Pools

bathenvironments

terraces new buildingwork


ceramicshowers

pools


102 103

linear drains

Waterproo�ng

The linear drains from butech in AISI 304 stainless steel and polypropylene are an excellent solution for shower trays with ceramic tiles, natural stone or mosaic covering. These new design drains available in two sizes and in three di�erent steel gratings, are an excellent complement for the PORCELANOSA Grupo bathroom settings.

These drains consist of a sewer, u-bend and decorative grating, and feature a wide ledge on which to glue the imperband waterproof sheet. Available for laying close to the wall and in the center of the shower, they help to solve easily and e�ectively indoor waterproo�ng and drainage.

linear drains

Linear wall drain features:

• Includes side piece for �xing to wall.• Asymmetric �nish frame for trim against wall.• 135 mm · 5,31 in high drain.• Discharge speed. 0.8 l/s.• 50 mm · 1.97 in horizontal outlet.• 150 mm · 5.91 in diameter crown for imperband �xation.• Includes u-bend.

Linear grating features:

• AISI 304 stainless steel grating• Adjustable height; adaptable to the height of the shower wall covering.• Available in 700 and 900 mm · 27.56 in and 35.43 in• Steel and ceramic gratings can be installed with or without steel frame.• 26.5 cm · 10.43 in. diameter crown for imperband �xation.• Includes u-bend. Linear drain standard grating: steel grating with traditional design. Linear drain steel grating: steel grating with functional design. LIFESTYLE �nish. Linear drain ceramic grating: Special grating for bonding the same ceramics or mosaic than the rest of the built in shower.

Linear central drain features:

• Includes 4 regular height legs.• Asymmetric frame for trim against wall.• 140 mm · 5.51 in high drain.• Discharge speed. 0.8 l/s.• 50 mm · 1.97 in horizontal outlet.• 208 mm · 8.18 in diameter crown for imperband �xation.• Includes u-bend.

Recommended use:

• Specially designed drain for waterproo�ng built in showers.• Compatible with imperband waterproo�ng sheet.• Horizontal outlet.

Ceramic showers

indoor outdoor new buildingwork


ceramicshowers

Concept XPS shower tray.


Waterproo�ng

KEA SAPB82902027 100090862 700 mmB82902026 100090863 900 mm

KEA SAPB82902017 100078229 700 mmB82902022 100090864 900 mm

linear central drain

linear wall drain

central grating

wall grating

Presentation1 u./box1 u./box


Packaging

Packaging

Packaging

Packaging

KEA SAPB82902032 100091722 700 mm standardB82902028 100091723 900 mm standard

B82902029 100091718 700 mm steelB82902030 100091719 900mm steel

B82902033 100091720 700 mm ceramicsB82902031 100091721 900 mm ceramics

KEA SAPB82902019 100078231 700 mm standardB82902023 100090866 900 mm standard

B82902018 100078230 700 mm steelB82902024 100090867 900 mm steel

B82902016 100078228 700 mm ceramicsB82902025 100090868 900 mm ceramics


1 u./box1 u./box

1 u./box1 u./box


1 u./box1 u./box

1 u./box1 u./box


104 105

imperband USA kit

Waterproo�ng

The standard imperband kit is an indoor waterproo�ng system consisting of a PVC gutter thermowelded to a 150 x 225 cm waterproof sheet. Specially recommended for waterproo�ng shower trays in new building works. Residential use.

The waterproof sheet is an imperband type 0,5 mm thick polymer membrane with a double thermoplastic polyolefin sheet and covered on both sides by non woven polyester �bre that allow it to be bonded to surfaces using cement-based adhesives. The gutter features a compact design and multiple possibilities of outlet connections.

imperband USA kit

Features:

• Maximum security, it eliminates leakage risks between waterproof sheet and drain piece.

• 150 x 225 cm · 59” x 88.6” waterproof sheet.• Discharge speed. 0.5 l/s.• Compact system, just 100 mm · 3.94” high.• Includes u-bend.• Direct installation of the tile on the waterproof sheet.• Quick and easy application.

Recommended use:

• Specially designed for waterproo�ng built in showers.

Installation:

• Depending on the drainage pipe position, select one of the system outlets and seal the other outlet with the cap provided to that e�ect.

• Given the case, use the drain outlet diameter adapter and glue the drainage pipe.• Before laying the ceramics of the shower tray, check that the gutter works

correctly.• Use the waterproof sheet in the same way as the imperband sheet.

Substrates:

• Cement covered �oors.• Specially designed for Concept XPS shower trays, prefabricated polystyrene

panels.

Materials:


• Glass mosaic.• Natural stone.

KEA SAPB82902053 100110215 1.5 x 2.25 m standard

Presentation1 kit/box

Packagingimperband USA kit

indoor outdoor new buildingwork


ceramicshowers

Concept XPS shower tray.


Ceramic showers

Waterproo�ng


square grids

KEA SAPB82902021 100089372 squaredB82902056 100114593 sun

KEA SAPB82902044 100103364 1200 x 93 mmB82902045 100103365 596 x 93 mmB82902042 100103366 800 x 93 mm




Presentation1 grating/box1 grating/box

Presentation1 grating/box1 grating/box1 grating/box




Packaging

Packaging

Packaging

Packaging

Packaging

standard

chrome texture

texture

squared

line

squared sun

linear grids

KEA SAPB82902072 100130481 596 x 93 mmB82902073 100130482 800 x 93 mm





Presentation1 grating/box1 grating/box





Packaging

Packaging

Packaging

Packaging

Packaging

gold

ceramic

white

glass white

glass black

106 107

Decoupling and waterproo�ng

lamitech n is a multilayer polymer sheet, specially designed for outdoor �oors decou-pling. Protects tiles against substrate tensions, reducing the risk of breakage and piece lifting. Suitable for outdoor waterproo�ng.

Coextruded HDPE/EVAC membrane, with one side covered with polyester fibre and the other one with polyester entwined felt, that allows laying with cement-based adhesives. Absorbs tensions, reducing their transmission to the ceramic �oor. Indoor and outdoor use.

Features:

• Multilayer HDPE/EVAC polymer membrane covered with polyester �bre.• Maximum outdoors waterproo�ng with minimal thickness (3,4 mm · 0.133”).• It allows for direct laying of ceramic tiles with cement-based adhesive.• Good chemical resistance.• Improves impact noise reduction.• Quick and easy application.

Recommended use:

• Decoupling of balconies and terraces.• Waterproo�ng of outdoor �oors.• Laying of ceramics on wood substrates.• Laying of �oor tiles on cracked substrates. Terrace refurbishing.• Laying of ceramics on substrates which are not set yet or present residual damp.

Installation:

• lamitech n sheet is compatible with type C2 cement-based adhesive as per EN 12004.

• In case of surfaces bigger than the length of the sheet, put tha sheets together, cover the joint with lami-band 200 and glue with C2 adhesive.

• In waterproo�ng of �oors, lengthen the waterproo�ng with lami-band 200 at least 10 cm in all the spots where �oor meets the wall.

• In movement joints, use �exible tape waterproof band.• Be extremely cautious when connecting the sheet to the drainage systems.• Once lamitech n has been installed, cover with the desired covering. Never leave

exposed to direct sunlight.

Certi�cation:

• TCNA

Substrates:

• Cement or anhydrite covered �oors.• Concrete slabs.• Existing �oor tiles.• Plywood boards.

Materials:



KEA SAPB89500011 100089879 lamitech n

B84901005 100006217 200 mm lami-bandB84905004 100006221 waterproof band

B85900004 100072729 sylastic morteroB85900005 100072730 sylastic aditivo

Presentation Europallet5 m · 53.81 sqft reel 200 m2/pallet

30 m · 322.91 sqft reel50 m · 164 sqft roll

UnitUnit

Packaging

Terraces

bathenvironments

terraces anti-cracks refurbishing ceramicshowers

pools


lamitech n

lamitech n

lamitech n

108

Raised acces �ooringRaised acces �ooring

Raised acces �ooring for exteriorsRaised acces �ooring for exteriors

Cli-ker nCli-ker n

Cli-ker n exteriorsCli-ker n exteriors

110

116

122

128

Raised �oors

110 111

Technical �oors

Raised Access Flooring o�cesThe RAF system from butech is a type of raised technical �ooring for projects where you need easy access to the services housed beneath the �oor and also an easy and quick piece replacement. Indoor use.

This type of �ooring consists of a panel with ceramic covering and a galvanized steel frame.

Concentrated load at center of side of the panel (1 mm de�ection)

• With MEDIUM type stringer structure: 0.9 kN

• With no stringer structure: 0.8 kN

Concentrated load at center of the panel (1 mm de�ection):

• With MEDIUM type stringer structure: 1.9kN

• With no crosspiece structure: 1.8kN

Uniformly distributed static load (1 mm de�ection):

• With MEDIUM type stringer structure: 8.0 kN/m2

• With no crosspiece structure: 7.0 kN/m2

Concentrated load at center of side of the panel (1 mm de�ection)

• With MEDIUM type stringer structure: 1.6 kN

• With no stringer structure: 1.4 kN

Concentrated load at center of the panel (1 mm de�ection):

• With MEDIUM type stringer structure: 2.6kN

• With no stringer structure: 2.4kN

Uniformly distributed static load (1 mm de�ection):

• With MEDIUM type stringer structure: 11.0 kN/m2

• With no stringer structure: 10.0 kN/m2

Raised access �ooring panels:

The boards can be of two types: high density chipboard and calcium sulfate.

Chipboard core panels:

The RAF 38 M panels consist of a porcelain tile on a high density chipboard core (650 kg/m3), 0,15 mm - 0,006 inches thick aluminum foil lower covering and 1 mm thick perimeter edge in black ABS. The piece dimensions are 598x598x50 mm - 234/16 x 234/16x1,969 inches

The technical features of the 38 M, according to EN 12825, are:Available in all STON KER 59.6 X 59.6 and URBATEK 60 X 60 models.

Raised access �ooring structure.

The whole structure is made of galvanized steel, with no aluminum parts to meet �re protection standards. It consists of pedestals and optional reinforcement stringers.

• Pedestals are the system support, on which RAF panels are laid, and determine the �ooring height. For a better �tting of the RAF piece, a semi-rigid plastic joint is installed. Pedestals are bonded to the substrate with polyurethane putty.

• Medium stringers with longitudinal nerves have an open section and are designed to improve the RAF mechanical resistance and to ease piece replacement. The stringers are screwed to pedestals to improve the system stability and resistance.

For further information, refer to the technical sheet.

Calcium sulfate core panels:

The RAF 30 S panels consist of a porcelain tile on a high density chipboard core (1450 kg/m3), 0,5 mm - 0,010 inches thick aluminum foil lower covering and 1 mm thick perimeter edge in black ABS. The piece dimensions are 598x598x40 mm - 1ft 1135/64” x 1ft 1135/64” x 1,575 inches.

The technical features of the 30 S, according to EN 12825, are:

Available in all STON KER 59.6 X 59.6 and URBATEK 60 X 60 models.

Raised access �ooring

Floor tile section

Pedestals Stringers

Floor tile section

112 113

SHADING SHADING

Ferroker

Ceilán

Blueker

Ferroker Níquel234/16” x 234/16” B113

Ferroker Platino234/16” x 234/16” B113

Microcemento Blanco234/16” x 234/16” B80

Cemento Arena234/16” x 234/16” B80

STON-KER RECTIF. MATT-GLOSS

Ferroker234/16” x 234/16” B113

Microcemento Gris234/16” x 234/16” B80

Blueker 234/16” x 234/16” B80

Cemento Manhattan234/16” x 234/16” B80

Ferroker Aluminio234/16” x 234/16” B113

Microcemento Silver234/16” x 234/16” B80

Blueker Acero234/16” x 234/16” B80

Cemento Silver234/16” x 234/16” B80

Ferroker Titanio234/16” x 234/16” B113

Cemento

Raised access �ooring Ceramic tiles for RAF

STON-KER RECTIF. SHADING MATT




Ceilán Ivory234/16” x 234/16” B80

Microcemento

Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek. Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek.

114 115

Raised access �ooring

City

Town

RECTIF.

RECTIF.

City Cube234/16” x 234/16” Polished B113

234/16” x 234/16” Nature B452

Town White234/16” x 234/16” Polished B486

234/16” x 234/16” Nature B456

Town Black234/16” x 234/16” Polished B457

234/16” x 234/16” Nature B453

City Studio234/16” x 234/16” Polished B113

234/16” x 234/16” Nature B452

Town Acero234/16” x 234/16” Polished B456

234/16” x 234/16” Nature B452

Town Niquel234/16” x 234/16” Polished B456

234/16” x 234/16” Nature B452

City Graphic234/16” x 234/16” Polished B113

234/16” x 234/16” Nature B452

Town Arena234/16” x 234/16” Polished B456

234/16” x 234/16” Nature B452

Town Moka234/16” x 234/16” Polished B456

234/16” x 234/16” Nature B452

Ceramic tiles for RAF


116 117

Technical �oors

Raised Access Flooring exteriorThe outdoor RAF system from butech is a type of raised �ooring for projects where you need to cover outdoor sloping substrates with a �at surface. Outdoor use.This type of �ooring consists of a panel with ceramic covering and adjustable height pedestals.

Raised access �ooring panels:

Outdoor RAF panels are made from two porcelain tile pieces chemically glued. This type of panel features no water absorption and high breaking strength: up to 9.8 kN. Available in all anti-slip STON KER, PAR KER and URBATEK models. Format and thickness of each panel depends on the chosen tile from PORCELANOSA Grupo, the usual thickness being 24 mm.

Raised access �ooring for exterior

Raised access �ooring structure.

Pedestals are made of weatherproof plastic. They determine the height and the width of the open joint between panels. 4 mm. They adapt to the substrate's slopes thanks to their sloping base. There are two types of pedestals:

• Stackable. 10 to 15 mm - 25/64 to 19/32 inches height.• Adjustable height from 50 mm to 490 mm - 131/32 to 199/32 inches.

Pedestals are bonded to the substrate with p-404 polyurethane putty.

This type of raised �ooring produces �at surfaces which outdoors prevent water draina-ge and this results in a minimum water buildup on the ceramic tiles.For further information, refer to the technical sheet.

Plots

SAP KEA DESCRIPTION REGULATION mm REGULATION inch100005802 B80305010 Basic Plot 10 10 25/64100005803 B80305011 Basic Plot 15 15 19/32100005804 B80305020 Normal plots 50/70 50 - 70 131/32 - 23/4

100005805 B80305021 Normal plots 70/100 70 - 100 23/4 - 315/16

100005794 B80305001 Ultra plots 65/100 65 - 100 29/16 - 315/16

100005797 B80305004 Ultra plots 100/130 100 - 130 315/16 - 51/8

100005796 B80305003 Ultra plots 130/220 130 - 220 51/8 - 821/32

100005798 B80305005 Ultra plots 220/310 220 - 310 821/32 - 123/4

100005799 B80305006 Ultra plots 310/400 310 - 400 123/4 - 153/4

100005800 B80305007 Ultra plots 400/490 400 - 490 153/4 - 199/32

100005801 B80305008 Ultra plots 490/580 490 - 580 199/32 - 2213/16

118 119

Arizona

Jatoba

Aston

Aston Silver234/16” x 234/16” B80

Aston Antracita234/16” x 234/16” B80

Aston Acero234/16” x 234/16” B80

Jatoba Olivo78/16”x474/16 B110

Jatoba Rojo78/16”x474/16 B110

Jatoba Wengé78/16”x474/16 B110

Aston Arena234/16” x 234/16” B80

Aston Caliza234/16” x 234/16” B80

Arizona Antracita1615/16”x259/16” B79

Arizona Caliza1615/16”x259/16” B79

Arizona Stone1615/16”x259/16” B79

Arizona Arena1615/16”x259/16” B79

Raised access �ooring for exterior Ceramic tiles for outdoor RAF

STON-KER RECTIF. SHADING MATT STON-KER RECTIF. SHADING MATT

RECTIF. SHADING MATT

Please note this system is available with any format of tile from Porcelanosa, Venis or Urbatek. Butech recommends to use anti-slip tiles. Please note this system is available with any format of tile from Porcelanosa, Venis or Urbatek. Butech recommends to use anti-slip tiles.

120 121

Neo

Avenue

Neo Black2310/16”x2310/16” Texture B455

2310/16”x1113/16” Texture B454

Avenue Gray2310/16”x2310/16” Texture B456

2310/16”x1113/16” Texture B454

Carpatia

Tavola

Carpatia Gris175/16”x2516/16” B113

Carpatia Black175/16”x2516/16” B113

Tavola Foresta8 5/8 “ x 35 3/8 ” B122

5 5/8 “ x 35 3/8 ” B122

7 5/8 “ x 47 1/4 ” B100

Tavola Mogano7 5/8 “ x 47 1/4 ” B100

Tavola Rovere7 5/8 “ x 47 1/4 ” B100

Tavola Kenya7 5/8 “ x 47 1/4 ” B100

Tavola Natura7 5/8 “ x 47 1/4 ” B100

Tavola Grigio7 5/8 “ x 47 1/4 ” B100

8 5/8 “ x 26” B115

Raised access �ooring for exterior Ceramic tiles for outdoor RAF


RECTIF. SHADING MATT

RECTIF.

RECTIF.

Please note this system is available with any format of tile from Porcelanosa, Venis or Urbatek. Butech recommends to use anti-slip tiles. Please note this system is available with any format of tile from Porcelanosa, Venis or Urbatek. Butech recommends to use anti-slip tiles.

122 123

Cli-ker nTechnical �oors

CLI-KER n system from butech is a type of removable �oor covering for dry installation on leveled substrates. It is installed without the need of adhesives. Indoor use.

The CLI-KER n pieces consist of a porcelain tile from PORCELANOSA Grupo, on top, and a plastic layer that acts as a base and bears the joints on the sides of the tile. The pieces are pressed in a mold, and have a 234/16”x234/16” format, with a 16 mm thickness.

Available in all STON KER 59.6 X 59.6 and URBATEK 60 X 60 models.

Installation is carried out with binding elements that join the pieces mechanically and reversibly, so the system is easy to install and to remove. We recommend to install the �oor on a 1,3 mm - 0,051 inches thick and 390gr/m2 latex foam sheet laid directly on the leveled substrate.

This system includes:

• Tie for 4 pieces. Height: 5 mm - 0,197 inches.• Base for trimming. Height: 5 mm - 0,197 inches.• Height raisers. Available in 0.5 and 1 mm - 0,0197 and 0,0394 inches heights.• Acoustic foam sheet.• Cintex, sealing band for the leveling sheet.

For further information, refer to the technical sheet.

SAP KEA DESCRIPTION

100096030 B81200209 Compensation piece 0,5mm - 0,0197 inches

100096031 B81200207 Compensation piece 1mm - 0,0394 inches

100096038 B81200208 Plug 5mm - 0,197 inches

100102785 B81200228 Catches 5mm - 0,197 inches

100103280 B15901003 Levelling sheet (9mt2)


124 125

DESTONIF DESTONIF

Ferroker

Microcemento

Ceilán

Blueker

Ferroker Níquel234/16”x234/16” B113

Ferroker Platino234/16”x234/16” B113

Microcemento Blanco234/16”x234/16” B80

Cemento Arena234/16”x234/16” B80

Ferroker234/16”x234/16” B113

Microcemento Gris234/16”x234/16” B80

Ceilán Ivory234/16”x234/16” B80

234/16”x234/16” B80

Cemento Manhattan234/16”x234/16” B80

Aluminio234/16”x234/16” B113

Microcemento Silver234/16”x234/16” B80

Blueker Acero234/16”x234/16” B80

Cemento Silver234/16”x234/16” B80

Ferroker Titanio234/16”x234/16” B113

Cemento

Cli-ker n

STON-KER RECTIF. MATT-GLOSS

Ceramic tiles for Cli-ker n





126 127

City

Town

City Cube234/16”x234/16” Polished B113

234/16”x234/16” Nature B452

Town White234/16”x234/16” Polished B486

234/16”x234/16” Nature B456

Town Black234/16”x234/16” Polished B457

234/16”x234/16” Nature B453

City Studio234/16”x234/16” Polished B113

234/16”x234/16” Nature B452

Town Acero234/16”x234/16” Polished B456

234/16”x234/16” Nature B452

Town Niquel234/16”x234/16” Polished B456

234/16”x234/16” Nature B452

City Graphic234/16”x234/16” Polished B113

234/16”x234/16” Nature B452

Town Arena234/16”x234/16” Polished B456

234/16”x234/16” Nature B452

Town Moka234/16”x234/16” Polished B456

234/16”x234/16” Nature B452

Cli-ker n Cli-ker n

RECTIF.

RECTIF.

Please note this system is available with any 24x24 tile from Porcelanosa, Venis or Urbatek.

128 129

Arizona

Arizona Antracita175/16”x175/16” B57

Arizona Caliza175/16”x175/16” B57

Technical �oors

CLI-KER n ext system from butech is a type of removable �oor covering for dry installa-tion on leveled substrates. It is installed without the need of adhesives. Outdoor use.

TheCLI-KER ext pieces consist of a porcelain tile from PORCELANOSA Grupo, on top, and a plastic layer that acts as a base and bears the joints on the sides of the tile. The pieces are pressed in a mold, and have a 175/16”x175/16” format, with a 16 mm - 0,63 inches thickness.

The CLI-KER ext system reproduces the substrate's slopes like an outdoor traditional �oor covering, but leaving 4 mm - 0,1574 inches wide open joints for water drainage. Installation is carried out with binding elements that join the pieces mechanically and reversibly.

This �oor covering system reduces the risks of the e�ects of frost on outdoor ceramic �oor coverings, and eases their installation and removal too.For further information, refer to the technical sheet.

Cli-ker n exterior

Ceramic tiles for Cli-ker n exterior


SAP KEA DESCRIPTION

100096030 B81200209 Compensation piece - 0,5mm 0,0197 inches

100096031 B81200207 Compensation piece 1mm - 0,0394 inches

100104688 B81200234 Plug 10 mm - 25/64 inches

100104533 B81200233 Catches 10 mm - 25/64 inches

100106922 B78141125 Finishing pro�le

130 131

Eligible

Product family

Product name

Product name

Product name

Kilograms per pallet

Product picture

Type of packaging for the product

Types of substrates where the use of the product is recommended

Types of materials where the use of the product is recommended

Types of applications where the use of the product is recommended

Symbols for types of substrates

Image of a possible use of the product

Product features

Product coverage

Product certi�cations and standards

Mixed withcl-stuk

Non-eligible

Key

butech building technology, s.a.Ctra. Vila-real - Puebla de Arenoso (CV-20), Km. 2.5 · PO Box 297 · 12540 Villarreal, Castellón - SPAIN.

Telephone (+34) 964 53 62 00 · Fax: (+34) 964 53 00 34 · E-mail: [email protected] · www.butech.es

1213

CALIFORNIA COLORADO CONNECTICUT FLORIDA GEORGIA ILLINOIS MARYLAND MASSACHUSETTS NEW JERSEY NEW YORK

PENNSYLVANIA TEXAS CANADA

www.porcelanosa-usa.comwww.butech.es

profiles tile adhesives grouting material …

Documents