www.dmf lighting.com 1.800.441.4422 DesigneD & assembleD in the Usa Specif iations subject to change without notice. Issued: 07.13.12

Catalog #:

Project:

Type:

Date:

Value Series DLEI44” LED New Construction Housing

FEATURESThe DLEI4 recessed light-commercial housing is designed to accommodate dmflighting LED 4” down-lights in new construction applications. The fixture is IC & Non-IC rated, AIRTIGHT and California Title-24 compliant. ELECTRICAL: Luminaire accommodates input voltages of 120V; 277V stepdown transformer is also available. LED module install into fixture with a plug-in 120V line voltage IDEAL wiring connector.MOUNTING/INSTALLATION: The housing is equipped with pre-installed adjustable bar hangers to locate the housing between joists with 16” to 24” space. The patented design of the bar hangers allows easy ceiling installation of the housing into lumber, laminated beams and T-bar.CONSTRUCTION: 22 gauge, galvanized steel mounting frame with pre-wired 18 gauge galvanized steel junction box. Junction box is equipped with (7) 1/2” and (4) 3/4” knockouts with pryout slots. Supplied with quick connectors for supply wire connection. Maximum 1 ½” ceiling thickness.

QUALIFICATIONS / LISTINGS - UL Listed- Title 24 2008 high efficacy compliant - ASTM E283 approved (Airtight)- IC housing is UL Listed

B

B

C

D

A-Ceiling Cut-Out

A 4 1/4” (108mm)B 6” (152mm)

C 8 3/4 ” (222mm)D 6 1/4” (159mm)

DMEDME8 LED Module (Patent Pending)

APPLICATIONS: The DME8 series module is designed for use with existing, remodel or new con-struction 4”, 5”, and 6” housings. The hassle-free twist and lock feature allows a single module to be adapted into various trim styles and apertures. The combination of DME modules and trims are ideal for a wide variety of low-to-medium height installations including residential, commercial, retail and hospitality spaces. Modules have been UL qualified for both IC & Non-IC applications.OPTICS: Optical Diffusing lens shields direct view of LEDs and provides more precise optical control with greater visual cut-off. THERMAL MANAGEMENT: Proprietary die-cast aluminum heat-sink conducts heat effectively away from LEDs to ensure optimum performance and lifetime. The module has been desinged to efficiently transfer excessive heat through the trim and to the plenum space.ELECTRICAL: Integral and highly efficient solid state LED driver is accessible from below ceiling plane. Luminaire accommodates input voltages of 120V at 60 Hz. Power factor > .90. Driver is equiped with a thermal reset in the event of over temperature or internal failure. Designed for dimming capability to 15% in normal operation with standard 120V LED-rated, electronic low voltage and incandescent dimmers. (Refer to dmflight.com for a list of DME compatible dimmers)INSTALLATION: DME series module and trim combinations are designed for use in standard IC & Non-IC, AIRTIGHT 4”, 5” and 6” housings from dmfLIGHTING and other manufacturers.wARRANTy: dmfLIGHTING provides a five year limited warranty on the DME module.

QUALIFICATIONS / LISTINGS - UL Listed - UL Listed for wet locations- Title 24 2008 high efficacy compliant- LM-79 qualified

A 3 4/5” (96mm)B 2 4/5” (71mm)

A

B

* Tested with White Trim ReflectorNOTE: dmfLIGHTING maintains a tolerance of +/- 5% on flux and power measurements.

- DOE Energy Star qualified - IECC and CEC compliant - ASTM E283 approved (Airtight)

twist & lock

- Through branch circuit wiring (max 8 No.12ga., 90˚C conductors, 4 in - 4 out)

4" LED New Construction, IC & Non-ICDLEI4 with DME Module/Trim

SPECS AT A GLANCE:

Rated Life: 50,000 hrsWarranty: 5 yrs

Lumen Maintenance: 70%Dimmable: 15%

4"5"5"6"

6"

DME 88DME 88 DME 118 DME 88

DME 118

749940772

967

CRI: Watts:

> 80 < 12.6

> 80 < 12.6

> 80 < 16.0> 80 < 12.6

> 80 < 16.0

Efficacy:*Trim: Model: Lumens:

61 lm/w

62 lm/w

61 lm/w61 lm/w

61 lm/w

746