projection whiteboard · with exceptional projection and writing capabilities, and encourages...
TRANSCRIPT
Rev 07/21/15 RMCwww.moorecoinc.com
Projection Whiteboardwith Polyvision® e3™ CeramicSteel duo Surface
InStockNew!
Balt® & Best-Rite® are brand divisions of MooreCo, Inc.
2885 Lorraine Ave | Temple, TX 76501p: 800.749.2258 | f: 800.697.6258
www.moorecoinc.com
n Q1 n Q2 n Q5 n C10 n C15 n C20
Part No. Description Product Dimensions Ship Wt.Projection Whiteboard with Polyvision e3 CeramicSteel duo Surface
DUO4X63 4:3 aspect ratio, 79” diagonal 48"H x 63"W 72 lbs
DUO4X84 16:9 aspect ratio, 96” diagonal 48"H x 84"W 83 lbs
Shipping weights are listed on a per item basis and may vary based on quantities ordered. Due to shipping restrictions, boards listed as 3'H x 4'W actually measure 33.75"H x 48"W.Cradle to Cradle™ is a service mark of MBDC.
Projection Whiteboard with Polyvision® e3™ CeramicSteel duo Surface ▪ Designed to meet the demands of today’s students and workers, the Projection
Whiteboard with Polyvision® e3™ CeramicSteel duo Surface is engineered with exceptional projection and writing capabilities, and encourages interactive learning and collaboration.
▪ Strict flatness tolerances allow the Projection Whiteboard to support new technology such as infrared frames, interactive projectors, and camera-based solutions.
▪ No need to close the blinds or darken the room when using this board for projection. Low glare porcelain steel is ideal for spaces that are exposed to excessive ambient light, and reduces glare from both long and short throw projectors.
▪ Better visibility increases participation, while also minimizing classroom and meeting distractions.
▪ As a writing surface, Duo Board has minimal ghosting, and provides excellent color contrast with minimal light distortion for enhanced visibility.
▪ Fifty year guarantee. TAA compliant.
Reduced glare
Whiteboard surface Projection surface e3 CeramicSteel duo
Less reflectivity from natural light
Whiteboard surface Projection surface e3 CeramicSteel duo
Minimal ghosting
Whiteboard surface Projection surface e3 CeramicSteel duo
General cleaning instructions for e3 CeramicSteel duo:
1. Wipe surface with a clean cloth moistened with a high-quality whiteboard cleaner. Note: Using a non-appropriate cleaner may result in poor dry erasability due to the build-up of residues from the cleaner on the surface.
2. Rinse with clean, warm water to remove any cleaner residue.
3. Wipe surface dry with a clean cloth.
4. Surfaces used moderately should be cleaned two to three times per week. Surfaces used more intensely may require daily cleaning.