projector manual dec 2 2015
TRANSCRIPT
-
7/23/2019 Projector Manual Dec 2 2015
1/21
Nureva Interacve panoramic projector
User manual
-
7/23/2019 Projector Manual Dec 2 2015
2/21
Table of contents
Remote control..................................................
On screen display menu (OSD)..........................
Picture..........................................................
Screen..........................................................
Sengs........................................................
Volume.........................................................
Opons.........................................................
Interacve....................................................
Network.......................................................
Mulmedia........................................................
Compability modes.........................................
RS32 commands and protocol funcon list.......
Installing/cleaning the oponal dust lters.......
Input/output connecons and control panel....2
3
4
5
6
7
8
9
10
10
11
14
18
22
1
-
7/23/2019 Projector Manual Dec 2 2015
3/21
Input/output connecons
Control panel
1. On/standby LED: Refer to the LED indicator of the pro-jector power status
2. Enter: Conrm your item selecon
3. Temp LED: Refer to the LED indicator of the projectortemperature status
4. Lamp LED: Refer to the LED indicator of the projectorlight source status
5. Menu: Launch the on-screen display menu. To exit the
OSD, press the menu buon again.
6. Input: Select an input signal
7. Four direconal select keys: Use the arrows to selectitems or make adjustments to your selecons
8. Power: Turn the projector on or o
Whenever possible, use the buons on the projector remote control instead of the control panel as this will
help prevent shiing or skewing the projected image.
2
-
7/23/2019 Projector Manual Dec 2 2015
4/21
Remote control
1. Input source: Select the input source
2. Menu: Launch the on-screen display menu. To exitthe OSD, press the cancel buon or the menu buon
again.
3. Power: Turn the projector on or o
4. Four direconal select keys: Select items or make
adjustments to your selecons
5. Cancel: Exit a menu or cancel a selecon
6. Volume: Adjust the volume level for the projectorsspeaker
7. Mute: Mute the sound from the projectors speaker
8. Calibrate: Manually calibrate touch. Aer pressing
the buon on the remote control, press and hold the
crosshair symbol that appears on the screen unl it
changes to a darker color. Li your nger and follow
the dot to the next locaon. Repeat this step unl the
calibraon process is complete.
9. Enter: Conrm your item selecon
3
-
7/23/2019 Projector Manual Dec 2 2015
5/21
On-screen display menuThe projector has mullingual OSD menus that allow you to make image adjustments and change a
variety of sengs.
To access the OSD, press the menu buon on the projector remote control or control panel.
Use the arrow buons on the projector remote or control panel to navigate the main menu on the
le-hand side. Press the enter buon or the right arrow key to enter a submenu.
Use the up and down arrow keys to select the desired item in the submenu and the le and right ar-
row keys to adjust the sengs.
Once you have completed the necessary adjustments in the submenu, press the menu buon again to
return to the menu.
To exit the OSD, press the menu buon again or cancel. The new sengs will automacally be saved.
Navigang the menu
Menu
Submenu Sengs
4
-
7/23/2019 Projector Manual Dec 2 2015
6/21
Picture
Color mode
Choose from the factor pre-set opons or set your
own custom color mode
Bright for brightness opmizaon
PC For meeng presentaonMovie For playing video content
Game For game content
Use Custom user sengs
Wall color
Opmize the screen image according to your wall
color. Choose from white, light yellow, light blue,
pink, and dark green.
Brightness
Use the le and right arrows to
adjust the brightness of the image.
Contrast
Adjust the contrast to control the dierence be-
tween the lightest and darkest parts of the picture.
Sharpnessvideo mode only
Use the le and right arrows to adjust the sharpness
of the image.
Saturaon video mode onlyAdjust the image from fully saturated color to black
and white using the le and right arrows.
Hue video mode only
Adjust the color balance of red and green:
Press the le arrow to increase the amount of
green in the image
Press the right arrow to increase the amount of red
in the image
Gamma
Adjust the gamma value to obtain beer image con-
trast for the input.
5
-
7/23/2019 Projector Manual Dec 2 2015
7/21
Screen
Aspect rao
Auto Keep the images original width-height rao
and maximize the image to t nave horizontal or
vercal pixels
4:3 The image will be scaled to t the screen and
displayed using a 4:3 rao
16:9 The image will be scaled to t the width of
the screen and the height adjusted to display the
image using a 16:9 rao
16:10 The image will be scaled to t the width of
the screen and height adjusted to display the image
using a 16:10 rao (only for SSI 1080p)
UWHD The image will be scaled to t the width
of the screen and the height adjusted to display the
image using a 16:6 rao (only for ultrawide)
Phase
Synchronize the signal ming of the display with the
graphic card. If the image appears to be unstable or
is ickering, use this funcon to correct it.
Clock
Adjust to achieve an opmal image when there is
vercal ickering.
H. Posion
Adjust the horizontal posion of the image using the
le and right arrows. The range of movement will de-
pend on the image source.
V. PosionAdjust the vercal posion of the image using the le
arrow to bring the image up and the right arrow to
bring the image down. The range of movement will
depend on the image source.
Digital Zoom
Use the le arrow to zoom out and the right arrow to
zoom in.
V. Keystone
Use the le and right arrows to adjust vercal image
distoron. Use this opon if the image appears like a
trapezoid instead of rectangular.
Ceiling Mount
Front The image will project straight on the screen
Front ceiling Default selecon. When selected the
image will turn upside down.
Rear The image will reverse
Rear ceiling Image will reverse and ip upside down
6
-
7/23/2019 Projector Manual Dec 2 2015
8/21
Sengs
Language
Switch the OSD to a dierent language:
Press the right arrow to enter the submenu
Use the up and down arrows to select the language
Press the right arrow to nalize the selecon
Menu Locaon
Choose the menu locaon on the display screen.
VGA Out(Standby)
Choose Onto enable VGA Out connecon.
LAN (Standby)
Choose Onto enable LAN connecon. Choose Ofto
disable LAN connecon.
VGA 2 (Funcon)
Input ChooseInput to allow the VGA port to work as
a VGA input funcon.
Output Choose Output to enable the VGA Out func-
on once the projector is powered on.
Test Paern
Display a test paern.
Reset
Return all parameters on all submenus in the OSD to
the factory default sengs.
7
-
7/23/2019 Projector Manual Dec 2 2015
9/21
Volume
Volume
Control the following:
Speaker
Line out
Microphone Mute
Volume level
Microphone volume level
8
-
7/23/2019 Projector Manual Dec 2 2015
10/21
Opons
Logo
Set the desired startup screen. Any changes that
are made to this seng will take eect the next
me the projector is powered on.
Default The default startup screen
User Use a stored picture from the Logo Capture
funcon
Logo Capture
Click on the arrow to take a screenshot of theimage currently displayed on the screen. The OSD
menu will not appear in the screenshot and the
image can now be used as the projector startup
screen.
Auto Source
On The projector will search for other signals
if the current input signal is lost
O The projector will only search current
input connecon
Input
Click on the arrow to enable or disable input
sources. The projector will not search for inputs
that are not selected.
Informaon
Display the projector informaon. View the model
name, SNID, source, resoluon, soware version
and aspect rao on the screen.
Auto Power O (Min)
Set the countdown mer interval. The countdown
mer will start once the projector stops receiving sig-
nals. When the countdown is nished, the projector
will automacally power o.
SSI Sengs
SSI Hours Used (Normal) Displays the number of
hours the projector has been run in normal mode
SSI Hours Used (ECO) Displays the number of hoursthe projector has been run in ECO mode
SSI Power Mode Choose between normal and ECO
mode. ECO mode will dim the projector lamp to low-
er power consumpon and extend the lamp life.
High Altude
On The built-in fans run at high speed. Select this
opon when using the projector at altudes above
2,500 (762 m) or higher.
O The built-in fans automacally run at a variablespeed according to the internal temperature
Filters Remind (Hour)
Filters Remind (Hour) Set when you would like to be
reminded to change the lter
Cleaning up Remind Select Yes to reset reminder
aer replacing or cleaning the lter
9
-
7/23/2019 Projector Manual Dec 2 2015
11/21
Interacve
The Interacvefuncon is available when displaying graphic source from HDMI/VGA input. Other sources are
not supported.
Interacve sengs
Choose On to enable the interacve funcon
Choose Ofto disable the interacve funcon
Network
Status Display the network connecon status
DHCP Congure the DHCP sengs. Choose Onto
let the projector obtain an IP address automacally
from your network. Choose Ofto assign IP, subnet
mask, gateway and DNS conguraon manually.
IP Address Display an IP address
Subnet Mask Display the subnet mask number
Gateway Display the default gateway of the net-
work connected to the projector
DNS Display the DNS number
MAC Address Display the MAC address
Group Name Display the group name
Projector Name Display the projector name
Locaon Display the projector locaon
Contact Display the contact informaon
10
-
7/23/2019 Projector Manual Dec 2 2015
12/21
Mulmedia
1. On mulmedia menu, select Mobile/Tablet
2. On your mobile device or tablet PC, download the EZ-view applicaon from the App Store (iOS) or the Play
Store (Android)
3. Enable your mobile device or tablet PCs Wi-Fi funcon, and search the AP name listed in the Wi-Fi network
list.
4. Enter the password when prompted
5. Launch the EZ-view applicaon and enter the PCTOOL password.
6. Wait unl the connecon is established. Now the media les on your mobile device or tablet PC can be
accessed using the projector.
Project media les (photos, videos, music, documents) stored on the following devices:
Wireless dongle Wirelessly access the media les stored on your mobile phone, tablet, PC, notebook or
desktop
USB ashdrive Directly access the media les stored in the device
How to access mulmedia mode:
1.Plug a wireless dongle or USB ash drive into the USB connector at the back of the projector
2.Press the input buon on the remote control or on the control panel to turn on the projector. When the
input menu appears, press the arrow keys to select the Mulmedia and the Enter key to conrm.
Supported le formats
Photo BMP, JPG, JPEG, PNG
Music MP3, WMA
Video AVI, MOV, MP4, RM, RMVB, DAT, MPG, ISO, TS, MKV, VOB, AND WMV
Document Word, Excel, PPT, PDF
Mobile display
11
-
7/23/2019 Projector Manual Dec 2 2015
13/21
Latop display
1. On mulmedia menu, select Laptop
2. Enable your laptop or notebook Wi-Fi funcon, and search the AP name listed in the Wi-Fi network list
3. Enter the password when prompted
4. Open your web browser and enter the IP address. Then select Wi-Fi on the le side of the screen and install
the applicaon required by the operang system.
5. Launch the EZview applicaon and enter the control code shown on the boom right side of the screen
6. Wait unl the connecon is established. The media les on your laptop or notebook can now be accessed
using the projector.
Desktop display
1. On the mulmedia menu, select Desktop
2. Open your web browser and enter the IP address. Then select Wi-Fi on the le side of the screen and install
the applicaon required by your operang system.
3. Launch EZview applicaon and enter the control code shown on the boom right side of the screen
4. Wait unl the connecon is established. The media les on your desktop can now be accessed using the
projector.
12
-
7/23/2019 Projector Manual Dec 2 2015
14/21
USB storage display
1. On the mulmedia menu, select USB Disk
2. Use the arrow keys to select the le category and press Enter
3. Use the arrow keys to select the le to view or play and press Enter to conrm
Conguring mulmedia display sengs
1. On the mulmedia menu, select Sengs
2. Use the arrow keys to select the desired menu opon and press Enterto access the submenu for your
selecon
Menu opons:
System View the rmware version and update rmware
Video Change the display rao and set the repeat mode
Photo Change the display rao, slideshow paern, and slideshow duraonMusic Set the repeat mode
Wi-Fi Congure the Wi-Fi connecon
3. Use the arrow keys to select or adjust the seng, and press Enter to conrm
13
-
7/23/2019 Projector Manual Dec 2 2015
15/21
Compability modes
VGA analog
14
-
7/23/2019 Projector Manual Dec 2 2015
16/21
VGA analog connued
15
-
7/23/2019 Projector Manual Dec 2 2015
17/21
HDMI digital
16
-
7/23/2019 Projector Manual Dec 2 2015
18/21
HDMI digital connued
17
-
7/23/2019 Projector Manual Dec 2 2015
19/21
RS232 commands and protocol funcon list
RS232 port seng
RS232 Signals connecon
18
-
7/23/2019 Projector Manual Dec 2 2015
20/21
Commands set list
ASCII Code (Space before "n")
R / Keypad Power #0100 n0 : Off
1 : On
R / Keypad Input Source #0105 n
1 : VGA 12 : VGA 2
3 : HDMI 1
4 : HDMI 2
5 : Video
6 : Multimedia
R / Keypad Video Source Resync #0106 n
creen Projection Orientation #0123 n
1 : Front
2 : Rear
3 : Front Ceiling
4 : Rear Ceiling
etting Language #0130 n
1 : English
2 : German3 : Swedish
4 : French
5 : Arabic
6 : Dutch
7 : Norwegian
8 : Danish
9 : Simplified Chinese
10 : Polish
11 : Korean
12 : Russian
13 : Spanish
14 : Traditional Chinese15 : Italian
16 : Portuguese
17 : Turkish
18 : Japanese
olume Mute #0140 n0 : Off
1 : On
olume Volume #0141 n
ptions Auto Power Off (min) #0150 n Step = 5
creen Aspect Ratio Read #01120 n Oknn : 1/2/3/4 = Auto / 4:3 /
/ 16:10 (Ultra Wide)
ptions Input Source (curr. src) #01160 n Okn
n : 0/1/2/3/4/5/6 = None
VGA1 / VGA2 / HDMI1 /
HDMI2 / Video / Multime
ptions Sofware Version #01161 n Okddd ddd : FW version
ptions Information #01162 n Okabbbbccdddee
a : Power Status / b : LD
Hour / c : Input Source /
Firmware Version / e : C
mode
ptionsSerial Number
#01163 n Okaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa : S
Number
ptionsPower State
#01164 n Okn n : 0/1 = Standby / Powe
Command Type Command Description Projector Return N Value
-
7/23/2019 Projector Manual Dec 2 2015
21/21
Installing and cleaning the
oponal dust lterThe oponal dust lter should be used in dusty environments. If the dust lter
is installed, it is important to perform the proper maintenance to prevent the
projector from overheang. We recommend cleaning the dust lter aer every
500 hours of operaon.
Before you begin, turn the projector o and unplug the power cord
1. Pull the dust lter container out from the projector
2. Carefully remove the dust lter from the dust lter container
3. Either clean the lter, or replace it with a new lter
4. Put the dust lter container back inside the projector and press the power buon to turn the
projector on
5. Press the menu buon to enter the OSD and select the opons menu and use the Filters Remind
opon to reset the counter.