prolight pumh-60ftl-n74n 60w cob light-engine leds version: 1 · 2020-03-27 · we provide the...
TRANSCRIPT
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
ProLight PUMH-60FTL-N74N60W COB Light-Engine LEDsTechnical DatasheetVersion: 1.4
Features‧High flux density of lighting source ‧Good color uniformity‧RoHS compliant‧More energy efficient than incandescent andmost halogen lamps‧No UV‧Long lifetime
Main Applications ‧Architectural and Entertainment Lighting‧Medical Lighting‧Transportation‧Spot Lighting‧Emergency Vehicle Lighting ‧Machine Vision
Introduction‧ The input power is 60 Watt, the multi-chip ultra high power ProEngineSeries delivers never before seen luminous flux output from a single emitter. The superficial illuminating nature of ProEngine makes them the referencein spot lighting, typical applications include architectural and entertainment lighting, medical lighting, transportation, emergency vehicle lighting and machine vision.
2019/08DS-0469
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
Mechanical Dimensions
2
Notes:
1. The cathode side of the device is denoted by the “ + / - “ mark on the part body.
2. Drawing not to scale.
3. All dimensions are in millimeters.
4. Unless otherwise indicated, tolerances are ± 0.30mm.
5. Please do not use a force of over 0.3kgf impact or pressure on the lens of the LED, otherwise
it will cause a catastrophic failure.
*The appearance and specifications of the product may be modified for improvement without notice.
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
3
Flux Characteristics at 700mA, TC = 25°CRadiation
PatternColor
Part Number
COB
Luminous Flux ΦV (lm)
Minimum Typical
Lambertian
Red
PUMH-60FTL-N74N
390 460
Green 690 815
Blue 140 165
White 980 1160
● ProLight maintains a tolerance of ± 7% on flux and power measurements.● Please do not drive at rated current more than 1 second without proper heat sink.
Electrical Characteristics at 700mA, TC = 25°CThermal Resistance
Forward Voltage VF (V) Junction to Board
Color Min. Typ. Max. (°C/ W)
Red 15.0 16.5 20.0
0.4Green 18.0 22.0 23.0
Blue 18.0 21.0 23.0
White 17.0 19.0 22.0
● ProLight maintains a tolerance of ± 0.5V for Voltage measurements.
Optical Characteristics at 700mA, TC = 25°C Total
included Viewing
Dominant Wavelength λD, Angle Angle
RadiationColor
or Color Temperature CCT (degrees) (degrees)
Pattern Min. Typ. Max. θ0.90V 2 θ1/2
Lambertian
Red 620 nm 623 nm 630 nm 160 120
Green 520 nm 524 nm 528 nm 160 120
Blue 453 nm 455 nm 457 nm 160 120
White 5590 K 6020 K 6500 K 160 120
● ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.
● ProLight maintains a tolerance of ± 5% for CCT measurements.
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
4
Absolute Maximum RatingsParameter Red/Green/Blue/White
Max DC Forward Current (mA) 800
Peak Pulsed Forward Current (mA) 1000 (less than 1/10 duty cycle@1KHz)
ESD Sensitivity±2000V
(HBM per MIL-STD-883E Method 3015.7)
LED Junction Temperature 120°C
Operating Board Temperature-40°C - 85°C
at Maximum DC Forward Current
Storage Temperature -40°C - 120°C
Reverse Voltage Not designed to be driven in reverse bias
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.26 0.28 0.30 0.32 0.34 0.36 0.38
y
x
Planckian(BBL)
5590 K
6020 K
White
WAWB
6500 K
5
Color BinWhite Binning Structure Graphical Representation
White Bin Structure
Bin Code x yTyp. CCT
(K)Bin Code x y
Typ. CCT
(K)
WA
0.3300 0.3560
5800 WB
0.3207 0.3473
62500.3207 0.3473 0.3113 0.3385
0.3221 0.3246 0.3142 0.3172
0.3300 0.3320 0.3221 0.3246
● Tolerance on each color bin (x , y) is ± 0.005
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
0.0
0.2
0.4
0.6
0.8
1.0
350 400 450 500 550 600 650 700 750 800 850
Rela
tive S
pectr
al P
ow
er
Dis
trib
ution
Wavelength (nm)
Standard Eye Response CurveWhite
0.0
0.2
0.4
0.6
0.8
1.0
350 400 450 500 550 600 650 700 750 800
Rela
tive S
pectr
al P
ow
er
Dis
trib
ution
Wavelength (nm)
Blue
Green Red
6
Color Spectrum, TJ = 25°C
2. White
1. Blue、Green、Red
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
0
200
400
600
800
1000
1200
12 14 16 18 20 22 24 26
Avera
ge F
orw
ard
Curr
ent
(mA
)
Forward Voltage (V)
0
200
400
600
800
1000
1200
12 14 16 18 20 22 24 26
Avera
ge F
orw
ard
Curr
ent
(mA
)
Forward Voltage (V)
0
200
400
600
800
1000
1200
14 16 18 20 22 24 26 28A
vera
ge F
orw
ard
Curr
ent
(mA
)
Forward Voltage (V)
0
200
400
600
800
1000
1200
8 10 12 14 16 18 20 22
Avera
ge F
orw
ard
Curr
ent
(mA
)
Forward Voltage (V)
7
Forward Current Characteristics, TJ = 25°C 1. Forward Voltage vs. Forward Current
GreenRed
WhiteBlue
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0 200 400 600 800 1000 1200
Rela
tive L
um
inous F
lux
Forward Current (mA)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0 200 400 600 800 1000 1200
Rela
tive R
adio
metr
ic P
ow
er
Forward Current (mA)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0 200 400 600 800 1000 1200
Rela
tive L
um
inous F
lux
Forward Current (mA)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0 200 400 600 800 1000 1200
Rela
tive L
um
inous F
lux
Forward Current (mA)
8
Forward Current Characteristics, TJ = 25°C 2. Forward Current vs. Normalized Relative Luminous Flux
GreenRed
WhiteBlue
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
-0.02
-0.01
0.00
0.01
0.02
0.03
0.04
300 400 500 600 700 800 900 1000 1100
∆x,
∆y
Forward Current (mA)
-2.0
-1.0
0.0
1.0
2.0
3.0
4.0
300 400 500 600 700 800 900 1000 1100
∆λ
D(n
m)
Forward Current (mA)
Red
Green
Blue
∆x
∆y
9
Forward Current Characteristics, TJ = 25°C 3. Forward Current vs. Dominant Wavelength Shift
4. Forward Current vs. Chromaticity Coordinate Shift
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
80
84
88
92
96
100
104
108
20 40 60 80 100
Rela
tive F
orw
ard
Voltage (
%)
Junction Temperature, TJ (℃)
0
20
40
60
80
100
120
140
20 40 60 80 100
Rela
tive L
ight
Outp
ut
(%)
Junction Temperature, TJ (℃)
10
Junction Temperature Relative Characteristics1. Junction Temperature vs. Relative Light Output at 700mA
Red
Green
Blue
White
2. Junction Temperature vs. Relative Forward Voltage at 700mA
Red
Green
Blue
White
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
-0.03
-0.02
-0.01
0.00
0.01
0.02
0.03
20 40 60 80 100
∆x,
∆y
Junction Temperature, TJ (℃)
-4
-2
0
2
4
6
8
10
20 40 60 80 100
∆λ
D(n
m)
Junction Temperature, TJ (℃)
11
Junction Temperature Relative Characteristics3. Junction Temperature vs. Dominant Wavelength Shift at 700mA
Red
Green
Blue
∆x
∆y
4. Junction Temperature vs. Chromaticity Coordinate Shift at 700mA
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
0
10
20
30
40
50
60
70
80
90
100
-100 -80 -60 -40 -20 0 20 40 60 80 100
Rela
tive I
nte
nsity
(%)
Angular Displacement (Degrees)
12
Typical Representative Spatial Radiation PatternLambertian Radiation Pattern
We Provide the Light to the world
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
Notes for handling of glass lens LEDs
● Please do not use a force of over 0.3kgf impact or pressure on the glass lens,
otherwise it will cause a catastrophic failure.
● Avoid touching the glass lens and the optical area of the COB Array especially by sharp tools
such as Tweezers
● Avoid touching the glass lens especially by sharp tools such as Tweezers.
● Avoid leaving fingerprints on the glass lens.
● Please store the LEDs away from dusty areas or seal the product against dust.
● Please do not mold over the glass lens with another resin. (epoxy, urethane, etc)
13
Recommended Soldering Condition● Please use lead free and “no clean ” solders.
● Soldering shall be implemented using a soldering tip at a temperature lower than 350 ℃, and shall
be finished within 3.5 seconds for each pad.
● During the soldering process, put the LEDs on materials whose conductivity is poor enough not to
radiate heat of soldering.
● Properly solder tin wires before soldering them to LEDs.
● Avoid touching the glass lens with the soldering iron.
● Please prevent flux from touching to the glass lens.
● Please solder evenly on each pad.
● Contacts number of a soldering tip should be within twice for each pad.
● Next process of soldering should be carried out after the LEDs have return to ambient temperature.
*ProLight cannot guarantee if usage exceeds these recommended conditions.
Please use it after sufficient verification is carried out on your own risk if absolutely necessary.
Precaution for Use● The modules light output are intense enough to cause injury to human eyes if viewed directly.
Precautions must be taken to avoid looking directly at the modules with unprotected eyes.
● The modules are sensitive to electrostatic discharge. Appropriate ESD protection measures
must be taken when working with the modules. Non-compliance with ESD protection
measures may lead to damage or destruction of the product.
● Chemical solvents or cleaning agents must not be used to clean the modules.
Mechanical stress on the Emitters must be avoided. It is best to use a soft brush, damp
cloth or low-pressure compressed air.
● The products should be stored away from direct light in dry location.
● The appearance, specifications and flux bin of the product may be modified for improvement
without notice. Please refer to the below website for the latest datasheets.
http://www.prolightopto.com/
Handling of Glass Lens LEDs