promotion june / july 2019 - holer.co.nz · all in nzd, subject to terms & conditions as...
TRANSCRIPT
![Page 1: Promotion June / July 2019 - holer.co.nz · All in NZD, subject to terms & conditions as outlined on back page.-4 Promotion June / July 2019 Developed by Holer and specifically for](https://reader033.vdocument.in/reader033/viewer/2022041419/5e1dd1ca7b18bd5e8777650d/html5/thumbnails/1.jpg)
Promotion June / July 2019
All subject to terms & conditions as outlined on back page. -1-
![Page 2: Promotion June / July 2019 - holer.co.nz · All in NZD, subject to terms & conditions as outlined on back page.-4 Promotion June / July 2019 Developed by Holer and specifically for](https://reader033.vdocument.in/reader033/viewer/2022041419/5e1dd1ca7b18bd5e8777650d/html5/thumbnails/2.jpg)
All in NZD, subject to terms & conditions as outlined on back page. -2-
Promotion June / July 2019
Holer Diamond Tools HTC Floor Systems
Announcement
End of a successful partnership
We wish to advise that Holer Diamond Tools will no longer be the appointed HTC distrib-utor for New Zealand. This was the decision by Husqvarna Head Office who acquired HTC Floor Systems in 2017.
Despite the successful Holer & HTC partner-ship since 2001 and full commitment by Holer Diamond Tools, Husqvarna will con-solidate its sales channel in New Zealand for both grinder brands (HTC & Husqvarna) through their local distributor.
Customers need choice and products tai-lored to the local market
Holer Diamond Tools will continue to offer machinery and tooling to the Flooring Prep and Polishing market.
This will also encompass a full range of dia-mond tools that are tailored to the New Zealand concrete conditions and above all at market competitive prices.
Service & Repair
Our Customer Commitment
Holer Diamond Tools employs HTC factory trained service technicians. We will continue to offer our know how and expertise to our customers for all service and repair for HTC machinery. A vast range of spare parts are available ex Holer stock.
Warranty
Husqvarna has confirmed that all warranties will continue to be covered. This applies for machines previously sold, as well for ma-chines that are in stock and yet to be sold by Holer. Warranty service for these machines can be carried out by Holer or the appointed distributor.
Machinery on offer from Holer
Holer Diamond Tools will continue to offer floor grinding machinery, including HTC, alt-hough not as the official distributor. At pre-sent we have large machinery stock holdings which will allow us to continue to supply the market throughout 2019 and into 2020.
Holer Diamond Tools has been providing quality goods and services to the New Zea-land concrete industry for over 27 years and will continue to strive being the leader.
Contact us for your requirements, we look forward to being of service to you.
![Page 3: Promotion June / July 2019 - holer.co.nz · All in NZD, subject to terms & conditions as outlined on back page.-4 Promotion June / July 2019 Developed by Holer and specifically for](https://reader033.vdocument.in/reader033/viewer/2022041419/5e1dd1ca7b18bd5e8777650d/html5/thumbnails/3.jpg)
All in NZD, subject to terms & conditions as outlined on back page. -3-
Promotion June / July 2019
FENIX is perfect for grinding & polishing of cementitious top-pings (overlays or screed) and concrete. Thanks to its flexible pads it is also a good problem solver in case of minor low spots when grinding & polishing concrete. The pads are easy to attach on Velcro holders under the machines.
Stock Clearance
FENIX
prices displayed already discounted -35% / per unit
For Hard Concrete Choose from SS Single or DS Double segs
Stock Clearance
HTC H / SF Series For Very Hard Concrete Choose from SS Single or DS Double segs
prices displayed already discounted –30% / per unit
Stock Clearance
HTC X / CX Series
X / CX SS Single DS Double
GOLD #25 $27.30 $41.30
GREY #40 $27.30 $41.30
BROWN #80 $27.30 $41.30
BLACK #100 $27.30 $41.30
H / SF SS Single DS Double
GOLD #25 $24.50 $41.30
GREY #40 $24.50 $41.30
BROWN #80 $24.50 $41.30
BLACK #100 $24.50 $41.30
FENIX 5”/125mm 7”/180mm 9”/230mm 11”/270mm
Hand
Polisher
HTC420 HTC500-650 / HUSK
PG680
HTC800
HUSK PG820
GREY #40 Sold out $38.35 Sold out $55.25
BROWN #80 $38.35 $38.35 $48.75 $55.25
BLACK #100 $38.35 $38.35 $48.75 $55.25
BLUE #200 $38.35 $38.35 $48.75 $55.25
RED #400 $38.35 $38.35 $48.75 $55.25
WHITE #800 $38.35 $38.35 $48.75 $55.25
GREEN #3000 $38.35 $38.35 $48.75 $55.25
SR Resin Polishing shoes
For Concrete, Terrazzo and Stone
Stock Clearance
HTC SR RESIN
prices displayed already discounted –40% / per unit
SR Shoe
GREY #40 $28.92
BROWN #80 $28.92
Black #100 Sold out
BLUE #200 $28.92
RED #400 $28.92
WHITE #800 $28.92
![Page 4: Promotion June / July 2019 - holer.co.nz · All in NZD, subject to terms & conditions as outlined on back page.-4 Promotion June / July 2019 Developed by Holer and specifically for](https://reader033.vdocument.in/reader033/viewer/2022041419/5e1dd1ca7b18bd5e8777650d/html5/thumbnails/4.jpg)
All in NZD, subject to terms & conditions as outlined on back page. -4-
Promotion June / July 2019
Developed by Holer and specifically for
New Zealand’s Xtreme Ultra hard ag-gregates and concrete.
River Pebble / Limestone, additives and the way placers finish our floors creates the chal-lenge for the Concrete Grinding Professional to get through the top screed layer to expose aggregate.
The New XU2 tooling solves this with:
Unrivalled scratch patterns
Xtreme Speed
Non-Glazing
Ask for our other XU grit options (#40, #60, #90)
XU2 Xtreme Ultra The First Grind Solution
XU Shoes Priced from NZ$26.10ea
Layout Options:
SA Single
DB Double (Bi-Direct)
TR Triple (Tesla)
(ideal for heavy machines, PG820/HTC800)
Shoe Style Options:
Any type to fit HTC, HUSKI, Lavi, FastFix, Arti.
XU2 scratch pattern after 1 pass.
(follow with XU3 (#40) or XU4 (#60) for scratch removal)
Competitor Scratch
pattern after multiple passes
Eats concrete
![Page 5: Promotion June / July 2019 - holer.co.nz · All in NZD, subject to terms & conditions as outlined on back page.-4 Promotion June / July 2019 Developed by Holer and specifically for](https://reader033.vdocument.in/reader033/viewer/2022041419/5e1dd1ca7b18bd5e8777650d/html5/thumbnails/5.jpg)
All in NZD, subject to terms & conditions as outlined on back page. -5-
Promotion June / July 2019
New Design | Made in New Zealand Available in A (Anticlock) & C (Clock)
NEW RAPTOR PCD Coatings & Sticky Materials
Shoe Style Options:
Any type to fit HTC, HUSKI, Lavi, FastFix, Arti.
Double with Bumper seg
Single w Dome & Bumper seg
from $71.10 / shoe
Coating Re-
moval Guide
RAPTOR
Double
RAPTOR
Single
Material /
Thickness <3mm >3mm
Epoxy
Sticky / Glue
Paint
Tile Screed
Take Advantage of 3for2 deal
Buy any 3pc (mix & match) and get the low price (prices shown are the discounted price based on any 3pc)
5L NET $ 54.78
20L NET $ 172.68
5L NET $ 82.51
20L NET $ 276.68
5L NET $ 68.64
20L NET $ 252.68
5L NET $ 117.18
20L NET $ 415.33
5L NET $ 266.01
20L NET $ 900.69
SuperGROUT
Liquid grout for pin hole & crack filling
SuperCURE Ultra
Densifier to harden & dust proof concrete
SuperSHIELD
Light Penetrating stain protect.
Adds Shine & Gloss
SuperSHIELD PLUS
Semi Penetrating stain protect.
Adds Shine & Gloss
SuperSHIELD Ultra
Full Penetrating stain protect.
No shine—Satin
Available in #20/25 GOLD #40/50 GREY
Trade $55.00 Promo $49.50
-10%
NEW moisture tolerant formula
Non bubbling even on new/fresh concrete
650ml ready to use car-tridges
SuperFill Polyurea semi rigid joint solution
Trade $98.00 Promo $88.20
-10%
BLACK
Intellectual GREY
Grizzle GREY
Get close into corners
Fits onto angle grinder (M14)
CORNER Grind cups 55mm
![Page 6: Promotion June / July 2019 - holer.co.nz · All in NZD, subject to terms & conditions as outlined on back page.-4 Promotion June / July 2019 Developed by Holer and specifically for](https://reader033.vdocument.in/reader033/viewer/2022041419/5e1dd1ca7b18bd5e8777650d/html5/thumbnails/6.jpg)
All in NZD, subject to terms & conditions as outlined on back page. -6-
Promotion June / July 2019
MVC-HTC-GLPS
Cyclone Pre-Separator w Longopac Camlock: 75mm
MVC-HTC-80ID
(7.5kW/380V/16.7A) w Longopac Hose: 75mm
HTC GL PS HTC 80 iAD II
Promo $2,399.00 Promo $14,875.00
MVC-ERM-S26 ERMATOR S26 w Longopac (2-motor/15A) 2500W Airflow: 400m³/h
Trade $2,995.00 Promo $2,695.50
MVC-ERM-S36
ERMATOR S36 w Longopac (3-motor/14.8A) 3600W Airflow: 600m³/h
Trade $4,795.00 Promo $4,315.50
MVC-ERM-S13L
ERMATOR S13 w Longopac (1-motor/10A) 1260W Airflow: 210m³/h
$500 worth of FREE* Diamond Grinding Shoes with S13 (*based on trade price)
Trade $1,895.00 Promo $1,705.50
$500 worth of FREE* Diamond Grinding Shoes with S26 (*based on trade price)
$500 worth of FREE* Diamond Grinding Shoes with S36 (*based on trade price)
-10% -10% -10%
FREE* FREE* FREE*
MST-ACH-AMS130
230V/10A/2000W
Max blade / cut depth / length:
350mm / 105mm / 1300mm
AMS 130 Slab & Site saw
Trade $3,495.00 Promo $3,145.50
-10%
Dust FREE dry cutting with integrated vacuum. Cutting depth / Length: 140mm/ 600mm
Collapsible stand & use as cart
Ready to go with blade, vacuum, stand
230V/15A
Watch in action
Scan
or
iQMS362
Trade $4,295.00
Promo $3,865.50
incl side table & suitable blade
MVC-OEM-VC4210M incl all accessories
MAKITA VC4210 M-Class
Trade $1,450.00
Promo $999.00 Price conditional to purchase also $999.00 net worth
of any diamond tools
Free Hoodie
![Page 7: Promotion June / July 2019 - holer.co.nz · All in NZD, subject to terms & conditions as outlined on back page.-4 Promotion June / July 2019 Developed by Holer and specifically for](https://reader033.vdocument.in/reader033/viewer/2022041419/5e1dd1ca7b18bd5e8777650d/html5/thumbnails/7.jpg)
All in NZD, subject to terms & conditions as outlined on back page. -7-
Promotion June / July 2019
DWI1000-BS40
Dia-Wire 1m Ø10.5mm (sintered) BS-C40 (black) 40 beads & spring Heavy Reinforced Concrete
Trade $129 p/m Promo $109.65
Fast cutting
Durable
No bead movements
MDR-TYT-DRU160P
Hydrostress DRU160 Drill Rig w m/mount max drill Ø/L2: 160 /590mm
Suits DK1603 & DMC6P
Promo $2,319.20 Promo $1,732.50
MDR-TYT-DRA400P
Hydrostress DRA400 Drill Rig (no m/mount) max drill Ø 300 (400mm with ModulDrill extension)
max drill L2: 720mm
Suits DK32/SR38/SR75
FREE* FREE*
AUTO-FEED SYSTEM complete
Rig, Motor, Auto-Feed
Includes WEKA SR38BA (Core bit range: 40mm-400mm), WEKA KS50S rig (up to 500mm), WEKA BA Autofeed, m/mount.
BA Auto Feed is an automatic
feed attachment that eliminates
manual up-down feed of the
core drill motor on the KS50S
drill rig.
Significantly improves daily out-
put due to continuous feed,
allows operator to perform other
site tasks.
Constant feed pressure:
2 settings: 100% max or reduced
75% pressure feed.
Soft contact start, automatic
feed rate adaption when drilling
reinforcing, vibration monitoring,
with AUTO depth stop. Simply
activated by pushing required
button on SR38BA core drill
motor, no separate box required.
Promo $8,599.00 Ready to go
$500 worth of FREE* Diamond Core Drill bitswith any of the below (*based on trade price)
MDX-FIX-APM12-16
16mm x 50mm Leave in wall
(Box of 50pc)
Anchor Plugs M12
Trade $41.55 / box Promo $37.40 / box
-10%
DIAMOND WIRE
-15%
DHS0400-HSP-009
New VICTORY 2 Pro hand saw blade. 416x3.0x12
Free Hoodie w every 10 boxes
VICTORY II 3for2
Promo $159.33ea Price displayed is average price for all 3
More SPEED
Softer bond
Faster Cutting
Lower price
DTS0350-F080-C2G
Brick Saw blade | F80 | 350 x 3.2 x 9 Laser welded | Super Silent
For the hardest Austral Bricks & Pavers
Promo $299.00ea Price & hoodie when purchasing 2pc or more
F80 Twin Deal
DDS0230-020
Angle Grinder blade | Whisper Laser | 230x2.4x10 Laser welded | Whisper Core Silent
For concrete block | Aerated concrete | Concrete
Whisper Laser Twin Deal
Promo $99.00ea Price & hoodie when purchasing 2pc or more
Free Hoodie
Free Hoodie
![Page 8: Promotion June / July 2019 - holer.co.nz · All in NZD, subject to terms & conditions as outlined on back page.-4 Promotion June / July 2019 Developed by Holer and specifically for](https://reader033.vdocument.in/reader033/viewer/2022041419/5e1dd1ca7b18bd5e8777650d/html5/thumbnails/8.jpg)
Standard Terms & Conditions apply. All prices stated in NZ Dollars, excluding GST & freight, per unit or subject to set conditions. Valid only for period as stated and/or while stock available. Any free merchandise or promotional items (if stated) may be limited to max 3 units per customer or per order.
Available from or authorized distributor
Holer New Zealand Ltd Head Office: 65 Main Road, Richmond 7020 Auckland Branch: 3a Cow ley P lace, North Shore 0632 Christchurch Branch: 11a Parkhouse Road, Wigram 8042
[email protected] ◊ www.holer.co.nz ◊ 0800-224 653 -8-
Promotion June / July 2019
MFS-CCT-CC2527KC-20
Core Cut floor saw CC2525KC-20 w/Hydraulic Raise & Lower 25HP Kohler Max blade / cut depth: 650mm / 265mm
Core Cut CC2500 PETROL
Trade $19,950.00 Promo $17,955.00
-10%
MFS-CCT-CC1820HS
Core Cut floor saw CC1820HXL-20S (20" guard) / 20HP Honda Max blade / cut depth: 600mm / 230mm
CORE CUT CC1800 PETROL
Trade $10,950.00 Promo $9,855.00
-10%
MFS-CCT-CC1213HS
Core Cut floor saw CC1211H-18 (18" guard) Inc Water Tank Kit
11.7HP Honda Max blade / cut depth: 500mm / 190mm
CORE CUT CC1200 PETROL
Trade $4,999.00 Promo $4,499.10
-10%
MPP-HYC-HPP13
Hycon powerpack HPP13 FLEX 11ccm (13HP Honda) 20-30l/min @ 150bar incl (excl hose pack)
HYCON HPP13 FLEX
Trade $6,595.00 Promo $5,935.50
-10%
Ring Saw blades 3for2
Ring saw 350x4.2x9 (RSL) RS-UH (w roller)
Ultra Hard Aggregate / Heavy Reinforcing - Soft Bond
Ring saw 350x4.2x9 (RSH) RS-HM (w roller)
Hard Aggregate / Heavy Reinforcing - Hard Bond
Promo $169.87ea Price displayed is average price for all 3
Promo $204.53ea Price displayed is average price for all 3
MPP-HYC-HPP18V-FLEX
Hycon powerpack HPP18V FLEX (18HP Briggs) 20-30-40 l/min @ 160bar (excl hose pack)
HYCON HPP 18V FLEX
Trade $8,695.00 Promo $7,825.50
-10%
Ideal for Hand & Ring saws, Hand held & rig mounted core drills, Post Driver, Rock drills, Augers, Submersible Water pumps, Breakers
Free Hoodie Free Hoodie