proshell kl all prointer kl all proshell kl all … · choose “prointer kl all” according to...

1
61 PTSP... 0815 PTSP.. 10125 PTSP... 1530 PTSP... 2025 REPTSAC .. GIPTSAC .. * * * * * PROINTER KL ALL POLISHED AND CHROMED BRASS AND ANODIZED AND POLISHED ALUMINIUM PROTERMSTEP ACC POLISHED AND SATIN FINISH STAINLESS STEEL AISI 304/1.4301-V2A PROSHELL KL ALL is a cove-shaped profile in polished and chromed brass and anodized and polished aluminium. The profile allows to connect the floor and wall coverings in ceramic and mosaic also with low thickness. It is particularly suitable to ensure cleanliness and hygiene in every kind of environment where good resistance to mechanical and chemical stresses are required. Its particular section and availability in five different finishes, make PROSHELL KL ALL a much sought after profile. PROTERMSTEP ACC is a profile for stair in polished and satin finish stainless steel AISI 304/1.4301–V2A. The profile protects the tread and cover the joint beetwen the tread and the riser of the step. It can also be used overturned and for this reason it is suitable for two different tile thickness. Its particular geometry and the availability of two finishes and different heights make PROTERMSTEP ACC suitable for every kind of stair with ceramic, terracotta floorings, wood and natural stone coverings. profiles for low thicknesses POLISHED / CHROMED BRASS thermo packed bar length 2,7 lm - pack. 40 Pcs - 108 lm Article H mm PIKLOL 045 (polished) 4,5 PIKLOC 045 (chromed) 4,5 PIKL... 045 POLISHED CHROME ALUMINIUM / GOLD thermo packed bar length 2,7 lm - pack. 40 Pcs - 108 lm Article H mm PIKLBC 045 4,5 PIKLBO 045 4,5 ANODISED SILVER ALUMINIUM thermo packed bar length 2,7 lm - pack. 40 Pcs - 108 lm Article H mm PIKLAA 045 4,5 COLOURS OL - Polished brass OC - Chromed brass AA- Anodised silver alum. BC- Polished chrome alum. BO - Polished gold alum. EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS 1. Choose “PROINTER KL ALL” according to the desired finish. 2. Cut “PROINTER KL ALL” to the desired length. 3. Apply the silicone along the floor-wall connection. 4. Press the arrowhead of “PROINTER KL ALL” into the silicone evenly untili t is completely adherent to the floor and wall. 1. Choose “PROTERMSTEP ACC” according to the tile thickness and desired finish. 2. Cut “PROTERMSTEP ACC” to the desired length. 3. Lay the raiser of the step and apply the adhesive on the sup- port where the profile will be laid. 4. Press the anchoring flange of “PROTERMSTEP ACC” into the adhesive. 5. Lay the tiles aligning them with the profile leaving a 2 mm joint. Remove immediately all remains of adhesive from the surface of the profile. 6. Fill the joints between the profile and the tiles with grout, in order to avoid water stagnation. Remove immediately all the remains of grout from the surface of the profile. 10 mm 4,2 mm 14,2 mm CAPS Article TPIKL ... = News 2017 = On demand, price and delivery time to be agreed. POLISHED STAINLESS ST. AISI 304/1.4301-V2A with protective film bar length 2,7 lm - pack. 15 Pcs - 40,5 lm SATINED STAINLESS STEEL AISI 304/1.4301-V2A bar length 2,7 lm - pack. 15 Pcs - 40,5 lm Article h / H mm PTSPAC 0815 08 / 15 PTSPAC 10125 10 / 12,5 PTSPAC 1530 15 / 30 PTSPAC 2025 20 / 25 Article h / H mm PTSPACS 0815 08 / 15 PTSPACS 10125 10 / 12,5 PTSPACS 1530 15 / 30 PTSPACS 2025 20 / 25 COLOURS AC- Polished stainless steel AISI 304/1.4301-V2A ACS - Satin finish stainless steel AISI 304/1.4301-V2A CORNER - pack. 10 Pcs JOINT H 10 - 12,5 - 15 - 20 mm - pack. 10 Pcs Article h / H mm REPTSAC 0815 08 / 15 REPTSAC 10125 10 / 12,5 REPTSAC 1530 15 / 30 REPTSAC 2025 20 / 25 Article h / H mm GIPTSAC 0815 08 / 15 GIPTSAC 10125 10 / 12,5 GIPTSAC 1530 15 / 30 GIPTSAC 2025 20 / 25 ON DEMAND L 100 mm 15 mm h 8 mm 1 mm24 mm 25 mm h 10 mm 1 mm 23, mm H 12,5 mm 25 mm H 30 mm h 15 mm 1 mm 46 mm 45 mm h 20 mm 46 mm H 25 mm 45 mm

Upload: lyquynh

Post on 04-Dec-2018

245 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PROSHELL KL ALL PROINTER KL ALL PROSHELL KL ALL … · Choose “PROINTER KL ALL” according to the desired finish. 2. Cut “PROINTER KL ALL” to the desired length. 3. Apply the

61

2017

PTSP... 0815 PTSP.. 10125

PTSP... 1530 PTSP... 2025

REPTSAC ..

GIPTSAC ..

*

****

PROINTER KL ALL

POLISHED AND CHROMED BRASS AND ANODIZED AND POLISHED ALUMINIUM

PROTERMSTEP ACC

POLISHED AND SATIN FINISH STAINLESS STEEL AISI 304/1.4301-V2A

PROSHELL KL ALL is a cove-shaped profile in polished and chromed brass and anodized and polished aluminium. The profile allows to connect the floor and wall coverings in ceramic and mosaic also with low thickness. It is particularly suitable to ensure cleanliness and hygiene in every kind of environment where good resistance to mechanical and chemical stresses are required. Its particular section and availability in five different finishes, make PROSHELL KL ALL a much sought after profile.

PROTERMSTEP ACC is a profile for stair in polished and satin finish stainless steel AISI 304/1.4301–V2A. The profile protects the tread and cover the joint beetwen the tread and the riser of the step. It can also be used overturned and for this reason it is suitable for two different tile thickness. Its particular geometry and the availability of two finishes and different heights make PROTERMSTEP ACC suitable for every kind of stair with ceramic, terracotta floorings, wood and natural stone coverings.

pro

files for lo

w th

icknessesPOLISHED / CHROMED BRASS thermo packed

bar length 2,7 lm - pack. 40 Pcs - 108 lm Article H mm

PIKLOL 045 (polished) 4,5PIKLOC 045 (chromed) 4,5

PIKL... 045

POLISHED CHROME ALUMINIUM / GOLD thermo packedbar length 2,7 lm - pack. 40 Pcs - 108 lm

Article H mmPIKLBC 045 4,5PIKLBO 045 4,5

ANODISED SILVER ALUMINIUM thermo packedbar length 2,7 lm - pack. 40 Pcs - 108 lm

Article H mmPIKLAA 045 4,5

COLOURS

OL - Polished brass OC - Chromed brass AA - Anodised silver alum. BC - Polished chrome alum. BO - Polished gold alum.

EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS

1. Choose “PROINTER KL ALL” according to the desired finish. 2. Cut“PROINTER KL ALL” to the desired length. 3. Apply the silicone along the floor-wall connection. 4. Press the arrowhead of “PROINTER KLALL” into the silicone evenly untili t is completely adherent to thefloor and wall.

1. Choose “PROTERMSTEP ACC” according to the tile thickness and desired finish. 2. Cut “PROTERMSTEP ACC” to the desired length.3. Lay the raiser of the step and apply the adhesive on the sup-port where the profile will be laid. 4. Press the anchoring flange of “PROTERMSTEP ACC” into the adhesive. 5. Lay the tiles aligning them with the profile leaving a 2 mm joint. Remove immediately all remains of adhesive from the surface of the profile. 6. Fill the joints between the profile and the tiles with grout, in order to avoid water stagnation. Remove immediately all the remains of grout from the surface of the profile.

10 mm

4,2 mm

14,2 mm

CAPS Article

TPIKL ...

= News 2017

= On demand, price and delivery time to be agreed.

POLISHED STAINLESS ST. AISI 304/1.4301-V2A with protective filmbar length 2,7 lm - pack. 15 Pcs - 40,5 lm

SATINED STAINLESS STEEL AISI 304/1.4301-V2A bar length 2,7 lm - pack. 15 Pcs - 40,5 lm

Article h / H mmPTSPAC 0815 08 / 15PTSPAC 10125 10 / 12,5PTSPAC 1530 15 / 30PTSPAC 2025 20 / 25

Article h / H mmPTSPACS 0815 08 / 15PTSPACS 10125 10 / 12,5PTSPACS 1530 15 / 30PTSPACS 2025 20 / 25

COLOURS

AC - Polished stainless steel AISI 304/1.4301-V2A

ACS - Satin finish stainless steel AISI 304/1.4301-V2A

CORNER - pack. 10 Pcs

JOINT H 10 - 12,5 - 15 - 20 mm - pack. 10 Pcs

Article h / H mmREPTSAC 0815 08 / 15REPTSAC 10125 10 / 12,5REPTSAC 1530 15 / 30REPTSAC 2025 20 / 25

Article h / H mmGIPTSAC 0815 08 / 15GIPTSAC 10125 10 / 12,5GIPTSAC 1530 15 / 30GIPTSAC 2025 20 / 25

ON DEMAND

L 100 mm

15 mm

h 8mm

1 mm 24mm

25 mm

h10mm1mm

23,mm

H12,5 mm

25 mm

H30 mm

h15mm

1 mm46mm

45 mm

h20 mm

46mm

H25 mm

45 mm