prosnap 100 - central texas metal roofing supply · 1. all panel pricing is based on net coverage....
TRANSCRIPT
ProSnap 100
Central Texas Metal Roofing Supply Co., Inc
1" 3/4"
GAUGE NET COVERAGE FINISH WEIGHT PER SQUARE
26 26 26
26
24 24 24 24
24 24 24
24 24
11 ¾” 16 ¼” 19 ¾”
16 ¼”
11 ¾” 16 ¼” 17 ¾” 19 ¾”
11 ¾” 16 ¾” 19 ¾”
16 ¾” 19 ¾”
CALL FOR OTHER GAUGES, SIZES AND METALS
GALVALUME® GALVALUME® GALVALUME®
SMP – COLOR
GALVALUME® GALVALUME® GALVALUME® GALVALUME®
KYNAR500® KYNAR500® KYNAR500®
PREMIUM KYNAR500® PREMIUM KYNAR500®
126 lb 117 lb 113 lb
117 lb
131 lb 126 lb 124 lb 122 lb
136 lb 126 lb 122 lb
126 lb 122 lb
PANEL PRICING: 1. All panel pricing is based on net coverage. 2. Pricing does not include fasteners. 3. All pricing is based on 40’-00” maximum panel length. Call for handling & shipping charges on longer lengths. 4. For lengths shorter then 2’-00” - add $2.00 / panel. 5. For all SMP orders less than 5 SQ please add $50.00 6. For all Kynar500® orders less than 10 SQ please add $300.00 7. Other gauges, colors and metals are available. Please inquire.
PACKAGING COST:
1. Standard packaging is block and band ……..……………..No Charge (Panels will have strippable film at female leg,). 2. LTL – plywood crating ………………………………………… $20.00 / SQ ($200.00 – minimum charge) 3. Standard crate size is 30 panels. Additional charge will apply for custom crating.
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning. 3. Remove all strippable film as soon as possible to prevent bonding to panel coating
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance is crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 1
ShurLoc 150
Central Texas Metal Roofing Supply Co., Inc
1 1/2" 1"
GAUGE NET COVERAGE FINISH WEIGHT PER SQUARE
26 26 26
26
24 24 24 24
24 24 24
24 24
11 ¾” 16 ¼” 19 ¾”
16 ¼”
11 ¾” 16 ¼” 17 ¾” 19 ¾”
11 ¾” 16 ¾” 19 ¾”
16 ¾” 19 ¾”
CALL FOR OTHER GAUGES, SIZES AND METALS
GALVALUME® GALVALUME® GALVALUME®
SMP – COLOR
GALVALUME® GALVALUME® GALVALUME® GALVALUME®
KYNAR500® KYNAR500® KYNAR500®
PREMIUM KYNAR500® PREMIUM KYNAR500®
126 lb 117 lb 113 lb
117 lb
131 lb 126 lb 124 lb 122 lb
136 lb 126 lb 122 lb
126 lb 122 lb
PANEL PRICING: 1. All panel pricing is based on net coverage. 2. Pricing does not include clips and fasteners. 3. All pricing is based on 40’-00” maximum panel length. Call for handling & shipping charges on longer lengths. 4. For lengths shorter then 2’-00” - add $2.00 / panel. 5. For all SMP orders less than 5 SQ please add $50.00 6. For all Kynar500® orders less than 10 SQ please add $300.00 7. Other gauges, colors and metals are available. Please inquire.
PACKAGING COST:
1. Standard packaging is block and band ……………….…...No Charge (Panels will have strippable film at female leg). 2. LTL – plywood crating ………………………………………… $20.00 / SQ ($200.00 – minimum charge). 3. Standard crate size is 30 panels. Additional charge will apply for custom crating.
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning. 3. Remove all strippable film as soon as possible to prevent bonding to panel coating.
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance is crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 2
ShurLoc 175
Central Texas Metal Roofing Supply Co., Inc
1 3/4"
GAUGE NET COVERAGE FINISH WEIGHT PER SQUARE
26 26 26
26
24 24 24
24 24
24 24
24 24
14 ½” 16” 18”
14 ½”
14 ½”
16” 18”
15” 18”
15” 18”
16” 18”
CALL FOR OTHER GAUGES, SIZES, AND METALS
GALVALUME® GALVALUME® GALVALUME®
SMP – COLOR
GALVALUME® GALVALUME® GALVALUME®
KYNAR500® KYNAR500®
PREMIUM KYNAR500® PREMIUM KYNAR500®
PAINT GRIP PAINT GRIP
131 lb 127 lb 124 lb
131 lb
141 lb 137 lb 133 lb
140 lb 133 lb
140 lb 133 lb
137 lb 133 lb
PANEL PRICING: 1. All panel pricing is based on net coverage. 2. Pricing does not include clips and fasteners. 3. All pricing is based on 40’-00” maximum panel length. Call for handling & shipping charges on longer lengths. 4. For lengths shorter then 2’-00” - add $2.00 / panel. 5. For all SMP orders less than 5 SQ please add $50.00 6. For all Kynar500® orders less than 10 SQ please add $300.00 7. Panels are available with mastic in the side lap. Add $5.00 / SQ if mastic will be required. 8. Other gauges, colors, and metals are available. Please inquire.
PACKAGING COST: 1. Standard packaging is block and band ……..……………..No Charge (Panels will have strippable film at female leg). 2. LTL – plywood crating ………………………………………… $20.00 / SQ ($200.00 – minimum charge). 3. Standard crate size is 30 panels. Additional charge will apply for custom crating.
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning. 3. Remove all strippable film as soon as possible to prevent bonding to panel coating.
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance is crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 3
Subject to change without notice. Effective 03/01/2012 PAGE 4
SpanLoc 100
Central Texas Metal Roofing Supply Co., Inc
1"
GAUGE NET COVERAGE FINISH WEIGHT PER SQUARE
26 26 26 26
26
24 24 24 24
24 24 24
24
24 24 24 24
13” 17 ½”
19” 21”
17 ½”
13”
17 ½” 19” 21”
13” 18” 21”
18”
13”
17 ½” 19” 21”
CALL FOR OTHER GAUGES, SIZES AND METALS
GALVALUME® GALVALUME® GALVALUME® GALVALUME®
SMP – COLOR
GALVALUME® GALVALUME® GALVALUME® GALVALUME®
KYNAR500® KYNAR500® KYNAR500®
PREMIUM KYNAR500®
PAINT GRIP PAINT GRIP PAINT GRIP PAINT GRIP
INQUIRE ABOUT CURVED SPANLOC 100
114 lb 109 lb 106 lb 106 lb
109 lb
123 lb 117 lb 116 lb 116 lb
123 lb 117 lb 116 lb
123 lb
117 lb 116 lb 117 lb 116 lb
PANEL PRICING: 1. All panel pricing is based on net coverage. 2. Pricing does not include clips and fasteners. 3. All pricing is based on 40’-00” maximum panel length. Call for handling & shipping charges on longer lengths. 4. For lengths shorter then 2’-00” - add $2.00 / panel. 9. For all SMP orders less than 5 SQ please add $50.00 5. For all Kynar500® orders less than 10 SQ please add $300.00 6. Panels are available with mastic in the side lap. Add $5.00 / SQ is mastic will be required. 7. Other gauges, colors, and metals are available. Please inquire.
PACKAGING COST: 1. Standard packaging is block and band ……..……………..No Charge (Panels will have strippable film at female leg). 2. LTL – plywood crating ………………………………………… $20.00 / SQ ($200.00 – minimum charge). 3. Standard crate size is 30 panels. Additional charge will apply for custom crating.
NOTES: 1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required it must be specified in writing at the time of
material order and Striation Waiver must be signed. 2. Heavier gauges, narrower widths and striation may minimize oil canning. 3. Remove all strippable film as soon as possible to prevent bonding to panel coating.
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance is crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 5
SpanLoc 150
Central Texas Metal Roofing Supply Co., Inc
1 1/2"
GAUGE NET COVERAGE FINISH WEIGHT PER SQUARE
26 26 26
26
24 24 24 24
24 24 24
24
24 24 24 24
12” 16 ½”
20”
16 ½”
12” 16 ½”
18” 20”
12” 17” 20”
12”
12”
16 ½” 18” 20”
CALL FOR OTHER GAUGES, SIZES AND METALS
GALVALUME® GALVALUME® GALVALUME®
SMP – COLOR
GALVALUME® GALVALUME® GALVALUME® GALVALUME®
KYNAR500® KYNAR500® KYNAR500®
PREMIUM KYNAR500®
PAINT GRIP PAINT GRIP PAINT GRIP PAINT GRIP
INQUIRE ABOUT CURVED SPANLOC 150
124 lb 116 lb 112 lb
116 lb
133 lb 129 lb 122 lb 120 lb
133 lb 124 lb 120 lb
133 lb
133 lb 129 lb 122 lb 120 lb
PANEL PRICING: 1. All panel pricing is based on net coverage. 2. Pricing does not include clips and fasteners. 3. All pricing is based on 40’-00” maximum panel length. Call for handling & shipping charges on longer lengths. 4. For lengths shorter then 2’-00” - add $2.00 / panel. 5. For all SMP orders less than 5 SQ please add $50.00 6. For all Kynar500® orders less than 10 SQ please add $300.00 7. Panels are available with mastic in the side lap. Add $5.00 / SQ if mastic will be required. 8. Other gauges, colors and metals are available. Please inquire.
PACKAGING COST: 1. Standard packaging is block and band ……..……………..No Charge (Panels will have strippable film at female leg). 2. LTL – plywood crating ………………………………………… $20.00 / SQ ($200.00 – minimum charge). 3. Standard crate size is 30 panels. Additional charge will apply for custom crating.
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning. 3. Remove all strippable film as soon as possible to prevent bonding to panel coating.
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance is crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 6
SpanLoc 200
Central Texas Metal Roofing Supply Co., Inc
2"
GAUGE NET COVERAGE FINISH WEIGHT PER SQUARE
26 26 26
26
24 24 24
24 24
24 24
24 24
14 ½” 16” 18”
14 ½”
14 ½”
16” 18”
15” 18”
15” 18”
16” 18”
CALL FOR OTHER GAUGES, SIZES, AND METALS
GALVALUME® GALVALUME® GALVALUME®
SMP – COLOR
GALVALUME® GALVALUME® GALVALUME®
KYNAR500® KYNAR500®
PREMIUM KYNAR500® PREMIUM KYNAR500®
PAINT GRIP PAINT GRIP
131 lb 127 lb 124 lb
131 lb
141 lb 137 lb 133 lb
140 lb 133 lb
140 lb 133 lb
137 lb 133 lb
PANEL PRICING: 1. All panel pricing is based on net coverage. 2. Pricing does not include clips and fasteners. 3. All pricing is based on 40’-00” maximum panel length. Call for handling & shipping charges on longer lengths. 4. For lengths shorter then 2’-00” - add $2.00 / panel. 5. For all SMP orders less than 5 SQ please add $50.00 6. For all Kynar500® orders less than 10 SQ please add $300.00 7. Battens are available with mastic in the side lap. Add $5.00 / SQ if mastic will be required. 8. Other gauges, colors, and metals are available. Please inquire.
PACKAGING COST: 1. Standard packaging is block and band ……..……………..No Charge (Panels will have strippable film at female leg). 2. LTL – plywood crating ………………………………………… $20.00 / SQ ($200.00 – minimum charge). 3. Standard crate size is 30 panels. Additional charge will apply for custom crating.
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning. 3. Remove all strippable film as soon as possible to prevent bonding to panel coating.
Galvalume® and Acrylic Coated Galvalume® is unfinished products. Shade variations, color difference and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance is crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 7
BattLoc 058
Central Texas Metal Roofing Supply Co., Inc
BATTEN CAP5/8"
GAUGE NET COVERAGE FINISH WEIGHT PER SQUARE
26 26 26
24 24 24
24 24 24
24 24
12 ¼” 14 ¾” 16 ¼”
12 ¼” 14 ¼” 16 ¼”
12 ¼” 14 ¼” 16 ¼”
12 ¼” 17 ¼”
CALL FOR OTHER GAUGES, SIZES AND METALS
GALVALUME® GALVALUME® GALVALUME®
GALVALUME® GALVALUME® GALVALUME®
KYNAR500® KYNAR500® KYNAR500®
METALLIC KYNAR500® METALLIC KYNAR500®
INQUIRE ABOUT CURVED BATTLOC 058
121 lb 117 lb 114 lb
131 lb 126 lb 123 lb
131 lb 126 lb 123 lb
131 lb 122 lb
PANEL PRICING: 1. All panel pricing is based on net coverage. 2. Pricing includes panels and battens. Clips and fasteners are not included. 3. All pricing is based on 40’-00” maximum panel length. Call for handling & shipping charges on longer lengths. 4. For lengths shorter then 2’-00” - add $2.00 / panel. 5. For all SMP orders less than 5 SQ please add $50.00 6. For all Kynar500® orders less than 10 SQ please add $300.00 7. Battens are available with mastic. Add $5.00 / SQ if mastic will be required. 8. Other gauges, colors and metals are available. Please inquire.
PACKAGING COST: 1. Standard packaging is block and band ……..……………..No Charge 2. LTL – plywood crating ………………………………………… $20.00 / SQ ($200.00 – minimum charge). 3. Standard crate size is 30 panels. Additional charge will apply for custom crating.
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning.
Galvalume® and Acrylic Coated Galvalume® are unfinished products. Shade variations, color difference and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance is crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 8
BattLoc 100
Central Texas Metal Roofing Supply Co., Inc
BATTEN CAP7/8" 1"
GAUGE NET COVERAGE FINISH WEIGHT PER SQUARE
26 26 26
26
24 24 24
24 24 24
24 24 24
11 ¾” 16 ¼” 19 ¾”
16 ¼”
11 ¾” or 13 ¾” 15 ¾” or 16 ¼”
17 ¾”
11 ¾” 16 ¾” 19 ¾”
11 ¾” 16 ¾” 19 ¾”
CALL FOR OTHER GAUGES, SIZES AND METALS
GALVALUME® GALVALUME® GALVALUME®
SMP – COLOR
GALVALUME® GALVALUME® GALVALUME®
KYNAR500® KYNAR500® KYNAR500®
PREMIUM KYNAR500® PREMIUM KYNAR500® PREMIUM KYNAR500®
INQUIRE ABOUT CURVED BATTLOC 100
127 lb 117 lb 113 lb
117 lb
131 lb 126 lb 124 lb
136 lb 125 lb 122 lb
136 lb 125 lb 122 lb
PANEL PRICING: 1. All panel pricing is based on net coverage. 2. Pricing includes panels and battens. Clips and fasteners are not included. 3. All pricing is based on 40’-00” maximum panel length. Call for handling & shipping charges on longer lengths. 4. For lengths shorter then 2’-00” - add $2.00 / panel. 5. For all SMP orders less than 5 SQ please add $50.00 6. For all Kynar500® orders less than 10 SQ please add $300.00 7. Battens are available with mastic. Add $5.00 / SQ if mastic will be required. 8. Other gauges, colors and metals are available. Please inquire.
PACKAGING COST: 1. Standard packaging is block and band ……..……………..No Charge 2. LTL – plywood crating ………………………………………… $20.00 / SQ ($200.00 – minimum charge). 3. Standard crate size is 30 panels. Additional charge will apply for custom crating.
NOTES:
1. Panels are produced as “STRIATED”. If “NON-STRIATED” panels are required it must be specified in writing at the time of material order and Striation Waiver must be signed.
2. Heavier gauges, narrower widths and striation may minimize oil canning.
Galvalume® and Acrylic Coated Galvalume® are unfinished products. Shade variations, color difference and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance is crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 9
Flush Panel
Central Texas Metal Roofing Supply Co., Inc
1"
GAUGE NET COVERAGE FINISH WEIGHT PER SQUARE
26 26
26
24 24 24
24 24
24 24
12” 16 ¼”
16 ¼”
12”
16 ¾” 17 ¾”
12”
16 ¾”
12” 16 ¾”
GALVALUME® GALVALUME®
SMP – COLOR
GALVALUME® GALVALUME® GALVALUME®
KYNAR500® KYNAR500®
PREMIUM KYNAR500® PREMIUM KYNAR500®
126 lb 117 lb
117 lb
136 lb 126 lb 124 lb
136 lb 126 lb
136 lb 126 lb
PANEL PRICING: 1. All panel pricing is based on net coverage. 2. All pricing is based on 20’-00” maximum panel length. Call for handling & shipping charges on longer lengths. 3. For lengths shorter then 2’-00” - add $2.00 / panel. 4. For all SMP orders less than 5 SQ please add $50.00 5. For all Kynar500® orders less than 10 SQ please add $300.00 6. Other gauges, colors and metals are available. Please inquire. 7. 24 gauge panels are available perforated. Add $ 25.00 / SQ for perforations.
PACKAGING COST:
1. Standard packaging is block and band ……..…………….. No Charge (Panels will have strippable film at female leg). 2. LTL – plywood crating ………………………………………… $20.00 / SQ ($200.00 – minimum charge). 3. Standard crate size is 30 panels. Additional charge will apply for custom crating.
NOTES:
1. Heavier gauges, narrower widths and striation may minimize oil canning. 2. Remove all strippable film as soon as possible to prevent bonding to panel coating. 3. Recommended panels over 36” stitch screw together every 12”. Over tightening stitch screws may induce oil canning. 4. Long lengths, over 10’-0”, have an increased chance of oil canning.
Galvalume® and Acrylic Coated Galvalume® are unfinished products. Shade variations, color difference and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance is crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 10
Vee Soffit
Central Texas Metal Roofing Supply Co., Inc
GAUGE NET COVERAGE FINISH WEIGHT PER SQUARE
26
26
26
26
12”
12”
12”
12”
GALVALUME®
SMP – COLOR
PERFORATED
GALVALUME®
SMP - COLOR
101 lb
101 lb
101 lb
101 lb
PANEL PRICING: 1. All panel pricing is based on net coverage. 2. All pricing is based on 20’-00” maximum panel length. Call for handling & shipping charges on longer lengths. 3. For lengths shorter then 2’-00” - add $2.00 / panel. 4. For all SMP orders less than 5 SQ please add $50.00 5. Other gauges, colors and metals are available. Please inquire.
PACKAGING COST:
1. Standard packaging is block and band..………………….. No Charge (Non perforated Panels will have strippable film). 2. LTL – plywood crating ………………………………………… $20.00 / SQ ($200.00 – minimum charge)
* Remove all strippable film as soon as possible to prevent bonding to panel coating.
Galvalume® and Acrylic Coated Galvalume® are unfinished products. Shade variations, color difference and a rate of weathering in unfinished product such as Galvalume® and Acrylic Coated Galvalume® should be anticipated and are not a cause for rejection. Use a pre-painted finish if uniform weathering and appearance is crucial. Oil canning is inherent to roll formed products and might not be a reason for rejection.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 11
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
HIP / RIDGE CAP
6 7/16"COLOR
1/2"
?
SPECIFY ANGLE OR ROOF SLOPE
T101/10 T101/20
10’-0” 20’-2”
13 7/8” 13 7/8”
9.89 19.95
PART NUMBER LENGTH GIRTH WEIGHT
FLOATING HIP / RIDGE CAP
4"
2 1/2"
1/2"
1 1/4"?
COLOR
120°
SPECIFY ANGLE OR ROOF SLOPE
T105/10 T105/20
10’-0” 20’-2”
16 ½” 16 ½”
13.06 26.34
PART NUMBER LENGTH GIRTH WEIGHT
T106/10 T106/20
10’-0” 20’-2”
18 ½” 18 ½”
14.65 29.54
VENTED RIDGE CAP
4"
2 1/2"
1/2"
1 1/4"?
120°
COLOR
1"
SPECIFY ANGLE OR ROOF SLOPE
PART NUMBER LENGTH GIRTH WEIGHT
T111/10
10’-0” 26 1/8” 20.68
VENTED RIDGE CAP
SPECIFY ANGLE OR ROOF SLOPE
VENTED AREA = 4.62SQ IN/LF DIM “A” DEPENDS ON THE ROOF SLOPE. 1/12 to 6/12…….A= 7 ½” 7/12 to 10/12…..A= 8 ½” 11/12 to 12/12…A= 9”
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 12
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER DIM A LENGTH GIRTH WEIGHT
T401A/10 T401B/10 T401C/10 T401D/10 T401E/10
5/8” 1”
1 ½” 1 ¾”
2”
10’-0” 10’-0” 10’-0” 10’-0” 10’-0”
5 3/8” 5 ¾” 6 ¼” 6 ½” 6 ¾”
4.35 4.65 5.05 5.24 6.23
VENTED ZEE CLOSURE
PERFORATION
Subject to change without notice. Effective 03/01/2012 PAGE 13
1"5/8"
2 1/8" A
1"
SPECIFY ANGLE OR ROOF SLOPE
VENTED AREA = 2.31 SQ IN/LF
PART NUMBER LENGTH GIRTH WEIGHT
T150 18”
VENTED RIDGE END CAP
SPECIFY PANEL
N/A .15
PART NUMBER LENGTH GIRTH WEIGHT
T112/10 T112/20
10’-0” 20’-2”
5” 5”
VENT DRIP
3 1/4"
1 1/4"
1/2"
90°
135°
3.96 7.98
PART NUMBER LENGTH BOX QTY BOX WT
T113
4’-0” 24 30.00
VENTED INSERT
2"
3 1/4"
1"
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER DIM A LENGTH GIRTH WEIGHT
T152/10 T152/20
T153/10 T153/20
6” 6”
10 ¼” 10 ¼”
10’-0” 20’-2”
10’-0” 20’-2”
12 ¾” 12 ¾”
17” 17”
10.09 20.36
13.46 27.14
PEAK FLASHING / HIGH SIDE EAVE
SPECIFY ANGLE OR ROOF SLOPE
PART NUMBER LENGTH GIRTH WEIGHT
FASCIA TRIM
T154/10 T154/20
10’-0” 20’-2”
7 ½” 7 ½”
7.40 14.92
5"
1/2"
2"
PART NUMBER LENGTH GIRTH WEIGHT
T500/10 T500/20
10’-0” 20’-2”
6 7/8” 6 7/8”
5.44 10.89
BOX EAVE TRIM
3 7/8"
Subject to change without notice. Effective 03/01/2012 PAGE 14
2"
1/2"
SPECIFYSLOPE
SPECIFY ANGLE OR ROOF SLOPE
PART NUMBER LENGTH GIRTH WEIGHT
T501/10 T501/20
10’-0” 20’-2”
8” 8”
6.33 12.77
BOX CAP TRIM
4"
1/2"
3 1/2"
?
SPECIFY ANGLE OR ROOF SLOPE
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER DIM A LENGTH GIRTH WEIGHT
RAKE TRIM
Subject to change without notice. Effective 03/01/2012 PAGE 15
A
T502 T502
T503 T503
4” 4”
5” 5”
10’-0” 20’-2”
10’-0” 20’-2”
11 ¼” 11 ¼”
12 ¼” 12 ¼”
8.91 17.96
9.70
19.56 5"
5/8"
1"
PART NUMBER LENGTH GIRTH WEIGHT
T504/10
T504B/10
10’-0”
10’-0”
8 3/8”
8 3/8”
6.63
6.63
EXTENDED EAVE / RAKE
A
1 1/2"
B
1/2"
?
SPECIFY ANGLE OR ROOF SLOPE
T504 - DIM “A” = 3 7/8”, DIM “B” = 2” T504B - DIM “A” = 4 3/8”, DIM “B” = 1 1/2”
PART NUMBER LENGTH GIRTH WEIGHT
T20/10 10’-0” 2 1/2” 1.98
CONTINUOUS CLEAT
2"
1/2"
135°
PART NUMBER LENGTH GIRTH WEIGHT
T10/10
10’-0”
3 5/8”
2.68
OFFFSET CLEAT
1 1/2"
1/8"1 1/2"
5/8"
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
OFFSET PANEL CAP TRIM
Subject to change without notice. Effective 03/01/2012 PAGE 16
1/2"
2"
1 3/8"
2 1/2"
?
95°1 1/8"
SPECIFY ANGLE OR ROOF SLOPE
T505/10 T505/20
10’-0” 20’-2”
7 ½” 7 ½”
5.94 11.97
PART NUMBER DIM A LENGTH GIRTH WEIGHT
CAP TRIM 1"
T506/10 T506/20
T507/10 T507/20
T508/10 T508/20
T509/10 T509/20
1 1/8” 1 1/8”
1 5/8” 1 5/8”
1 7/8” 1 7/8”
2 1/8” 2 1/8”
10’-0” 20’-2”
10’-0” 20’-2”
10’-0” 20’-2”
10’-0” 20’-2”
5 1/8” 5 1/8”
5 5/8” 5 5/8”
5 7/8” 5 7/8”
6 1/8” 6 1/8”
4.06 8.18
4.45 8.98
4.65 9.38
4.85 9.78
1/2"
2 1/2"
A
PART NUMBER LENGTH GIRTH WEIGHT
T510/10 T510/20
10’-0” 20’-2”
9 1/8” 9 1/8”
7.22 14.57
SPLICE TRIM
1 1/8"
3"
2 1/2"
1 1/4"
PART NUMBER LENGTH GIRTH WEIGHT
T511/10 10’-0” 3 ½” 2.77
ALTERNATE SPLICE TRIM
2 1/2"
1/2"
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER DIM A LENGTH GIRTH WEIGHT
ZEE CLOSURE
Subject to change without notice. Effective 03/01/2012 PAGE 17
1"
T512/10
T513/10
T514/10
T515/10
T516/10
3/4”
1 1/8”
1 5/8”
1 7/8”
2 1/8”
10’-0”
10’-0”
10’-0”
10’-0”
10’-0”
2 3/4”
3 1/8”
3 5/8”
3 7/8”
4 1/8”
2.08
2.38
2.77
2.97
3.17
1"
A
PART NUMBER LENGTH GIRTH WEIGHT
COUNTERFLASH
2 1/2"
1/2"
1"
1/2"
T321/10
10’-0”
4 ½”
3.56
PART NUMBER LENGTH GIRTH WEIGHT
T322/10
10’-0”
6 ¾”
5.34
FLUSH MOUNT COUNTERFLASH 1"
1 1/4"
1"
2"
1/2"
135°
PART NUMBER DIM A LENGTH GIRTH WEIGHT
T517
T518
T519
¾”
1 ½”
2 ¼”
10’-0”
10’-0”
10’-0”
7 ½”
9”
10 ½”
5.94
7.13
8.31
SILL WITH SOFFIT
B
2 1/2"
1/2"5/8"
A
DIM B = DIM A + 2 ½”
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER DIM A LENGTH GIRTH WEIGHT
SILL / DRIP TRIM
T520/10
T521/10
T522/10
¾”
1 ¼”
2 ¼”
10’-0”
10’-0”
10’-0”
6 ¼”
7 ¼”
9 ¼”
4.35
4.75
5.54
Subject to change without notice. Effective 03/01/2012 PAGE 18
2 1/2"
1"5/8"
A
95°
PART NUMBER DIM A LENGTH GIRTH WEIGHT
SIDEWALL / PARAPET RAKE TRIM FLOATING
T523/10 T523/20
T524/10 T524/20
T525/10 T525/20
3” 3”
5” 5”
7” 7”
10’-0” 20’-2”
10’-0” 20’-2”
10’-0” 20’-2”
8” 8”
10” 10”
12” 12”
6.33 12.77
7.92
15.97
9.50 19.16
4"
A
1"
PART NUMBER LENGTH GIRTH WEIGHT
T526/10 T526/20
10’-0” 20’-2”
9 ¼” 9 ¼”
SIDEWALL / PARAPET RAKE TRIM FLOATING
7.32 14.77
3 1/2"
4 1/4"
1"
1/2"
PART NUMBER DIM A LENGTH GIRTH WEIGHT
T527/10
T528/10 T528/20
4 ½”
5 ½” 5 ½”
10’-0”
10’-0” 20’-0”
11”
12” 12”
8.71
9.50 19.16
ENDWALL / PARAPET HIGH EAVE
6"
A
?
SPECIFY ANGLE OR ROOF SLOPE
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
ENDWALL / PARAPET HIGH EAVE FLOATING
6"
4"?
1 1/4" 2 1/2"
SPECIFY ANGLE OR ROOF SLOPE
T529/10 T529/20
10’-0” 20’-2”
14 ¼” 14 ¼”
11.28 22.75
PART NUMBER LENGTH GIRTH WEIGHT
ENDWALL / PARAPET HIGH EAVE EXTENDED (FIXED)
4"
6"?
1/2" SPECIFY ANGLE OR ROOF SLOPE
T530/10
10’-0”
10 ½”
8.31
PART NUMBER LENGTH GIRTH WEIGHT
T180/10 T180/20
10’-0” 20’-2”
5” 5”
2 X 2 OUTSIDE ANGLE
2"
2"
1/2"
3.96 7.98
PART NUMBER LENGTH GIRTH WEIGHT
T181/10 T181/20
10’-0” 20’-2”
7” 7”
5.54 11.18
3 X 3 OUTSIDE ANGLE
3"
3"
1/2"
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 19
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
4 X 4 OUTSIDE ANGLE
4"
4"
1/2"
T182/10 T182/20
10’-0” 20’-2”
9” 9”
7.13 14.37
PART NUMBER LENGTH GIRTH WEIGHT
2 X 2 INSIDE ANGLE
2"
1/2"
T183/10 T183/20
10’-0” 20’-2”
5” 5”
3.96 7.98
PART NUMBER LENGTH GIRTH WEIGHT
T184/10 T184/20
10’-0” 20’-2”
7” 7”
3 X 3 INSIDE ANGLE
3"
3"
1/2"
5.54 11.18
PART NUMBER LENGTH GIRTH WEIGHT
T185/10 T185/20
10’-0” 20’-2”
9” 9”
7.13 14.37
4 X 4 INSIDE ANGLE
4"
4"
1/2"
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 20
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
PARAPET RAKE CLEAT
1"
1/2"1"
T531/10 T531/20
10’-0” 20’-2”
2 ½” 2 ½”
1.98 3.99
PART NUMBER LENGTH GIRTH WEIGHT
STANDARD VALLEY
45°
9 7/16"
1"
? COLOR
SPECIFY ANGLE OR ROOF SLOPE
T200/10 T200/20
10’-0” 20’-2”
20 13/16” 20 13/16”
16.63 33.53
PART NUMBER LENGTH GIRTH WEIGHT
T202/10
10’-0”
44”
EXTENDED VALLEY
COLOR
45°
20"2"
?
SPECIFY ANGLE OR ROOF SLOPE
34.83
PART NUMBER LENGTH GIRTH WEIGHT
T203/10
10’-0” 20 13/16” 30.68
VALLEY WITH INTEGRATED CLEAT
45°
4 1/16"
1"1 1/4"
2 7/8"COLOR
SPECIFY ANGLE OR ROOF SLOPE
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 21
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
EXTENDED VALLEY WITH INTEGRATED CLEAT
45°
11"
2"
COLOR
1 1/2"
6"
SPECIFY ANGLE OR ROOF SLOPE
T204/10 10’-0” 44” 34.83
PART NUMBER LENGTH GIRTH WEIGHT
VALLEY
COLOR
3" 1 3/8"
6 1/8"
4 1/2"1" ? 135°
SPECIFY ANGLE OR ROOF SLOPE
T205/10
10’-0”
30”
23.75
PART NUMBER LENGTH GIRTH WEIGHT
T206/10
10’-0”
41 ½”
VALLEY
COLOR
3"
1 3/8"
7 3/8"
9"1" ?
135°
SPECIFY ANGLE OR ROOF SLOPE
USE WITH HIGH FIXED OR FLOATING SYSTEM - EXTENDED
32.85
PART NUMBER LENGTH GIRTH WEIGHT
T207/10
10’-0”
32 7/8”
26.03
VALLEY
COLOR
2 3/8" 9/16"
9"
4 1/2"? 135°
SPECIFY ANGLE OR ROOF SLOPE
USE WITH LOW FIXED OR FLOATING SYSTEM.
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 22
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
VALLEY
COLOR
Subject to change without notice. Effective 03/01/2012 PAGE 23
2 3/8"
12 1/16"
9/16"9"?
135°
SPECIFY ANGLE OR ROOF SLOPE
T208/10
10’-0”
48”
38.00
PART NUMBER DIM A LENGTH GIRTH WEIGHT
SLOPE TRANSITION / PITCH CHANGE
A
9 5/16"
1/2"
?
COLOR
SPECIFY ANGLE OR ROOF SLOPE
T323/10 T323/20
T324/10 T324/20
T325/10 T325/20
8” 8”
11” 11”
14” 14”
10’-0” 20’-2”
10’-0” 20’-2”
10’-0” 20’-2”
17 13/16” 17 13/16”
20 13/16” 20 13/16”
23 13/16” 23 13/16”
14.10 28.44
16.48 33.23
18.85 38.02
PART NUMBER DIM A LENGTH GIRTH WEIGHT
T326/10
T327/10
T328/10
8”
11”
14”
10’-0”
10’-0”
10’-0”
20 13/16”
23 13/16”
26 13/16”
SLOPE TRANSITION / PITCH CHANGE WITH INTEGRATED CLEAT
7 13/16"
COLOR1 1/4"
2" A
1/2" SPECIFY ANGLE OR ROOF SLOPE
16.48
18.85
21.23
PART NUMBER LENGTH WEIGHT
HANGER6 HANGER7 HANGER8
6” 7” 8”
0.23 0.29 0.35
GUTTER HANGER
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
GUTTER STRAP
10"
18 GAUGE STRAP – USE WITH STYLE OR SCULPTURED GUTTER
T532/10
10”
2 ¼”
0.30
PART NUMBER LENGTH GIRTH WEIGHT
BOX GUTTER
Subject to change without notice. Effective 03/01/2012 PAGE 24
3/4"
1"
4 1/2"
5 1/4"
5 1/2"
3"
?
SPECIFY ANGLE OR ROOF SLOPE
T533/10 T533/20
10’-0” 20’-2”
20 ¾” 20 ¾”
15.83 31.93
PART NUMBER DIM A LENGTH GIRTH WEIGHT
T534/10 T534/20
T535/10 T535/20
7 5/16” 7 5/16”
7 15/16” 7 15/16”
10’-0” 20’-2”
10’-0” 20’-2”
23 5/16” 23 5/16”
23 15/16” 23 15/16”
17.66 35.62
18.16 36.62
SCULPTURED GUTTER 1"
4 3/4"
4 3/4"
4 1/2"
DIM"A"
1"
156°
102° 90°
102° +SLOPE
SPECIFY ANGLE OR ROOF SLOPE
USE WHERE EAVE PLATES ARE NOT USED T534 – UP TO 4/12 SLOPE T535 – OVER 4/12 SLOPE
PART NUMBER LENGTH GIRTH WEIGHT
T536/10 T536/20
10’-0” 20’-2”
23 ½” 23 ½”
18.60 37.52
SCULPTURED GUTTER
2"
1"
4 3/4"
4 3/4"
4 1/2"
5 1/2"
1"
156°
102°
102° +SLOPE
165°
SPECIFY ANGLE OR ROOF SLOPE
USE WHEN EAVE PLATES ARE USED USE UP TO 4/12 SLOPE
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER DIM A LENGTH GIRTH WEIGHT
STYLE GUTTER 1"
COLOR
Subject to change without notice. Effective 03/01/2012 PAGE 25
4 3/16" 1"
4 3/16"
4 1/2"
DIM"A"
120°
90°120°
90°-SLOPE
SPECIFY ANGLE OR ROOF SLOPE
T537/10 T537/20
T538/10 T538/20
T537 – UP TO T538 - OVER
5” 5”
5 ¼” 5 ¼”
4/12 4/12
10’-0” 20’-2”
10’-0” 20’-2”
SLOPE SLOPE
20 3/8” 20 3/8”
20 5/8” 20 5/8”
16.13 32.53
16.33 32.93
PART NUMBER LENGTH GIRTH WEIGHT
GUTTER END – BOX GUTTER
T540 10’-0” 20’-2”
N/A 0.25
PART NUMBER LENGTH GIRTH WEIGHT
T541 10’-0” 20’-2”
N/A 0.25
GUTTER END – SCULPTURED OR STYLE TYPE GUTTER
PART NUMBER LENGTH GIRTH WEIGHT
T542/10 T542/20
10’-0” 20’-2”
17 ½” 17 ½”
13.85 27.94
SCULPTURED EAVE TRIM 2" 1/2"
4 3/4"
4 3/4"
2 1/2" 1 3/4"
102°
156°
102°
5/8" SPECIFY ANGLE OR ROOF SLOPE
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
SCULPTURED HIGH SIDE EAVE TRIM 5 1/2"
4 3/4"
4 3/4"
2" 1 3/4"
1/2"
156°
5/8"
102°
102°-SLOPE
SPECIFY ANGLE OR ROOF SLOPE
T543/10 T543/20
10’-0” 20’-2”
20 ½” 20 ½”
16.23 32.73
PART NUMBER LENGTH GIRTH WEIGHT
SCULPTURED RAKE TRIM 3 5/8"
4 3/4"
4 3/4"
2" 1 3/4"
156°
102°
5/8"
90°
3/4"
T544/10 T544/20
10’-0” 20’-2”
19 3/8” 19 3/8”
15.34 30.93
PART NUMBER LENGTH GIRTH WEIGHT
T545/10 T545/20
10’-0” 20’-2”
16 ½” 16 ½”
13.06 26.34
STYLE RAKE TRIM
4 3/16"
4 3/16"1 1/2"
1 1/4"
120°
3"120°
3/4"
PART NUMBER LENGTH GIRTH WEIGHT
T546/10 T546/20
10’-0” 20’-2”
18” 18”
14.25 28.74
STYLE HIGH SIDE EAVE TRIM
4 3/16"
4 3/16" 1 1/4"
1 1/4"
5/8"
120°
120°-SLOPE
5 1/2"
SPECIFY ANGLE OR ROOF SLOPE
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 26
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
STYLE EAVE TRIM 2 1/16"
3/4"
3/4"
1 7/8"
4 3/16"
1 1/4"
120°
5/8"
T547/10 T547/20
10’-0” 20’-2”
12 1/8” 12 1/8”
9.50 19.16
PART NUMBER LENGTH GIRTH WEIGHT
STYLE RAKE END CAP
T548
N/A N/A
0.75
PART NUMBER LENGTH GIRTH WEIGHT
T549/10 T549/20
10’-0” 20’-2”
2 ¾” 2 ¾”
2.18 4.39
RAKE SLIDE
1"1/2"
3/4"45°
PART NUMBER LENGTH GIRTH WEIGHT
T21/10 10’-0” 3” 2.38
UNIVERSAL STRAP
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 27
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
DOWNSPOUT STRAP
3"
3"
4 1/8"
T311 3 10 1/8” 0.20
PART NUMBER LENGTH GIRTH WEIGHT
STRAIGHT DOWNSPOUT 4"
3 1/2"
T305/10 T305/20
10’-0” 20’-2”
16 ½” 16 ½”
13.26 26.74
PART NUMBER LENGTH GIRTH WEIGHT
T306/10 T306/20
10’-0” 20’-2”
16 ½” 16 ½”
13.26 26.74
DOWNSPOUT WITH ELBOW 4"3 1/2"
PART NUMBER LENGTH GIRTH WEIGHT
T310/45
T310/90
12”
12”
16 ½”
16 ½”
1.38
1.38
DOWNSPOUT ELBOW
3 1/2"4"
6"
6"
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 28
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER LENGTH GIRTH WEIGHT
BATTEN CAP
1"
1/4"
T 551 SPECIFY 2 9/16” 0.16/LF
PART NUMBER LENGTH GIRTH WEIGHT
SHURLOC 175 RIB COVER
T550
8” 4 ¼”
0.25
PART NUMBER GAUGE LENGTH FINISH
BP20GVZ40X50 20 N/A GALVANIZED
BEARING PLATE
3 7/8” X 5”
PART NUMBER PANEL SYSTEM HIEGHT GAUGE BOX QTY SPANLOC UTILITY CLIP
CLSL1024GFX1125
CLSL1524GFX1625
CLSL2024GFX2125
SPANLOC 100
SPANLOC 150
SPANLOC200 FIXED
1 1/8”
1 5/8”
2 1/8”
24
24
22
1,000
1,000
600
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 29
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER PANEL SYSTEM HIEGHT GAUGE BOX QTY SPANLOC UTILITY FLOATING CLIP
CLSL1024GFL1125
CLSL1522GFL1625
CLSL2022GFL2375
SPANLOC 100
SPANLOC 150
SPANLOC 200
1 1/8”
1 5/8”
2 1/8”
24 & 24
22 & 22
18 & 22
250
250
500
PART NUMBER PANEL SYSTEM HIEGHT GAUGE BOX QTY SHURLOC 150 CLIP
CLSH15GUT1500 SHURLOC 150 1 5/16” 500
PART NUMBER PANEL SYSTEM HIEGHT GAUGE BOX QTY SHURLOC 175 UTILITY CLIP
CLSH1718GUT1875 SHURLOC 175 1 7/8” 18 400
PART NUMBER PANEL SYSTEM HIEGHT GAUGE BOX QTY SHURLOC 175 UL CLIP
CLSH1718GUL1875 SHURLOC 175 1 7/8” 18 250
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 30
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER PANEL SYSTEM HIEGHT GAUGE BOX QTY BATTLOC CLIP
CLBL26GFX0625
CLBL26GFX1000 CLBL24GFX1000
CLBL26GFX1500 CLBL24GFX1500
BATTLOC 058
BATTLOC 100 BATTLOC 100
BATTLOC 150 BATTLOC 150
5/8”
1” 1”
1 ½” 1 ½”
26
26 24
26 24
1,000
1,000 1,000
500 500
PART NUMBER PIPE SIZE RANGE BASE DIMENSION
PFG000 PFG001 PFG002 PFG003 PFG004 PFG005 PFG007 PFG008 PFG009 PFG010
¼” TO 1 1/8” ¼” TO 2”
1 3/4” TO 4” ¼” TO 4” 3” TO 6” 4” TO 7”
6” TO 11” 7” TO 13”
10” TO 18” 16” TO 24”
3 ½” 4 ¾” 6 ¼” 7 ¾” 9 ¼”
10 ¾” 14 ½” 16 ½”
25 3/8” 39 ½” x 35” sq.
PIPE FLASHING – GRAY EPDM
EPDM RUBBER SERVICE TEMPERATURE –65F TO 250F. IF SLOPE IS MORE THAN 20 DEGREES USE NEXT SIZE UP.
PART NUMBER PIPE SIZE RANGE BASE DIMENSION
PFS003 PFS005 PFS008 PFS009
¼” TO 4” 4” TO 7”
7” TO 13” 10” TO 18”
7 ¾” 10 ¾” 16 ½”
25 3/8”
PIPE FLASHING – RED SILICONE (HIGH TEMPERATURE)
SILICONE SERVICE TEMPERATURE –40F TO 350F. IF SLOPE IS MORE THAN 20 DEGREES USE NEXT SIZE UP.
PART NUMBER PIPE SIZE RANGE BASE DIMENSION
PFG801 PFG802 PFG803
¾” TO 2 ¾” 2” TO 7 ¼”
3 ¼” TO 10”
6 ¼” 10 ¾” 14 ½”
RETROFIT PIPE FLASHING – GRAY EPDM
EPDM RUBBER SERVICE TEMPERATURE –65F TO 250F. IF SLOPE IS MORE THAN 20 DEGREES USE NEXT SIZE UP.
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 31
Standing Seam
Central Texas Metal Roofing Supply Co., Inc
ITEM DESCRIPTION
PART NUMBER SIZE TYPE
PNTK2
PNTS425
2 OZ
4.25 OZ
KYNAR - BRUSH ON (BRUSH NOT INCLUDED)
SMP – BRUSH ON
TOUCHUP PAINT
PART NUMBER SIZE CARTON CARTON BUTYL TAPE SEALER
TAPE038
TAPE078
TAPE250
3/8” X 3/32” X 45’
7/8” X 3/16” X 25’
2 ½” X 3/16” X 20’
24 ROLLS
14 ROLLS
6 ROLLS
45.20
60.75
23.00
PART NUMBER LENGTH WIDTH WEIGHT REFLECTIVE INSULATION
SINGLE BUBBLE FOIL BACKING
INSAAS48FOIL 125’-0” 4’-0” 50.00
PART NUMBER TYPE COLOR CARTON
QUANTITY CARTON WEIGHT
CAULK SEALER - TUBE
10 OZ TUBE
TCWM61111CLEAR TCWM62611GRAY
TCWM61141BRONZE TCWM61611BEIGE TCWM61011WHITE
ACRYLIC POLYURETHANE POLYURETHANE POLYURETHANE POLYURETHANE
CLEAR GRAY
BRONZE BEIGE WHITE
12 12 12 12 12
15 15 15 15 15
Kynar 500 ® Flashing – 24Ga Typ. Galvalume® and SMP Flashing – 26Ga Typ. Galvalume® = Acrylic Coated Galvalume Galvalume is a trademark of BIEC, Inc.
Austin – Headquarters / Sales Office 830 Sagebrush Dr Austin, Texas 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499
www.ctmrs.com
email: [email protected]
Seguin – Plant / Sales Office 720 West IH 10 Seguin, Texas 78155 (830) 379-3600 (877) 622-8677 Fax (830) 379-8753
Subject to change without notice. Effective 03/01/2012 PAGE 32