prospectus 2011e
TRANSCRIPT
PROSPECTUS Faculty of Engineering Technology
2011 / 2012
Faculty of Engineering Technology The Open University of Sri Lanka P. O. Box 21, Nugegoda 10250, Sri Lanka Telephones:
Dean / Faculty of Engineering Technology 0112881228, 0112881351 Fax : 0112822737
University Hunting Line 0112853777 General 0112822712-16
Fax: 0112436858 E-mail:
Dean / Faculty of Engineering Technology [email protected] General [email protected]
Web: http://www.ou.ac.lk/eng/
ii
Important Points & Dates ….
Closing date of applications**: February 26, 2011
English Grading Test: March 05, 2011
Registration for the Academic Year 2011/2012: May 05 to 17, 2011
Commencement of Academic Activities: May 28, 2011
Add / Drop Period: June 23, 24, & 25, 2011
Last Date for Withdrawal from the Programme
(with 90% refund):
June 27, 2011
Last date for dropping courses: July 25, 2011
** Those who have English qualifications (GCE (A/L) General English or equivalent can apply for the programme till May 2011
The dates given above are tentative. The exact dates will be individually informed to applicants after processing the application forms.
Please note that this Prospectus contains important information on the programmes and courses offered by the Faculty of Engineering Technology of the Open University of Sri Lanka (OUSL). The information provided here would be of use throughout your study at the OUSL. Therefore, you are advised to keep this Prospectus safe, as new Prospectus may not be given to you in subsequent years.
A list of qualifications presently recognised by the OUSL for granting exemptions is given in pages 39 & 54 of this Prospectus. If you possess any other qualification, which you consider should entitle you to obtain exemptions for any course(s), you should apply for its evaluation, on a set of prescribed forms given in page 75 of this Prospectus (These forms are also obtainable from the office of the Faculty of Engineering Technology).
iii
Message of the Dean
The Open University of Sri Lanka differs from the conventional universities in that it imparts instructions to students using distant teaching methodologies. This facilitates to enrol larger numbers of students and to give opportunities of higher education to employed persons. The system of open entry makes educational background and age no barrier for enrolment. Any of adult of the age of 18 years or above can register to follow our academic programmes. You can study at home, at your work place and at any time of the day when you are free from work. We will facilitate your studies by providing you with printed self study lesson material, which is given to you at the time of registration. This means your academic studies begin as soon as you register as a student to follow our programmes. In addition to printed lesson material, your academic activities are supported by on-line classes, tutor marked assignments, day schools, lab classes, mini projects etc. Some of these activities are done in classroom atmosphere with the presence of a teacher. Other activities such as mini-projects and tutor marked assignments also contribute towards the assessment of your performance. In addition, continuous assessment tests and final examinations are conducted for the assessment of your performance. Time schedule of all such activities conducted by the faculty are mentioned in the activity diary given to you at the time of your registration. It is your sole responsibility to plan your self studies and to participate in compulsory activities in order to have a satisfactory level of performance in each of the courses you offer in a particular academic year. I sincerely hope that you will find a programme suitable to your prospective carrier in our faculty. I would like to welcome you as a student of ours, who is motivated to pursue studies in distant mode. I wish you all the success in all your efforts to acquire a recognised qualification from our faculty. Good Luck! Prof. W. A. Wimalaweera Dean / Faculty of Engineering Technology
The Faculty of Engineering Technology of the Open University of Sri Lanka offers academic programmes leading to Certificates, Diplomas, Degrees and Post-Graduate Qualifications in engineering and industry related studies. We hope that this Prospectus and course information would be helpful to you to choose a programme of study to suit your requirements. Further it is intended to give you an understanding about the distant mode of education as practiced by the Open University of Sri Lanka.
iv
Contents Page General Information 1
The Study System 1
Structure of the Curriculum and Courses 2
Student Services 5
Student's Commitment 7
Student Fees 8
Programmes offered by the Faculty 10
Academic Departments 12
Staff of the Faculty 17
Course Information 25
Foundation course for Technology Programme 26
Advance Certificate in Technology 27
Diploma in Technology 29
Bachelor of Technology (Engineering) 31
Complete list of courses for Technology (Engineering) 33
Course Exemptions - Technology Programmes 38
Certificate in Industrial Studies 44
Diploma in Industrial Studies 46
Bachelor of Industrial Studies 48
Complete list of courses for Industrial Studies 50
Course Exemptions – Industrial Studies Programmes 54
Post Graduate Programmes 57
Post Graduate Research Degrees 61
Stand Alone Courses 61
How to select Courses 62
Scheme of Assessment 63
Explanatory Notes for Filling the Application Form 66
Map of Central Campus 71
Map of Colombo Regional Centre 72
Allocation of academic departments in new Science and Technology
building 73
Appendix 75
- 1 -
General Information
The University
The Open University of Sri Lanka (OUSL) is the only recognised university in Sri Lanka where students may pursue further education by distance education techniques in keeping with the philosophy of Open and Distance Learning. The OUSL has the same legal and academic status as any other national university in Sri Lanka. The University has over 27,000 students with extremely varied profiles, spread throughout the island. About 80% of these students are employed. The OUSL offers its own programmes of study leading to Certificates, Advanced Certificates, Diplomas, Degrees and Postgraduate Diplomas and Postgraduate Degrees. In addition to these regular academic programmes, there are continuing education courses, beginner‟s courses and awareness programmes. The OUSL is also fully equipped to support postgraduate research studies leading to Master of Philosophy (MPhil) and Doctor of Philosophy (PhD) degrees. Any person who is above 18 years of age can enrol at the OUSL. Exemptions from specific courses are granted to those who possess approved relevant qualifications. The OUSL provides a readily accessible and progressive ladder of opportunities for study, to improve the vocational, professional and earning potential of an individual. The educational programmes have been designed to meet national educational and training needs, and to offer opportunities to those who have the dedication and drive to succeed. With its flexibility, the OUSL provides a more socially equitable higher education system.
The Faculty of Engineering Technology
The Faculty of Engineering Technology is one of the four academic faculties of the OUSL. The other three faculties are the Faculty of Natural Sciences, the Faculty of Humanities and Social Sciences and the Faculty of Education. The administrative and academic head of the Faculty is the Dean. The Faculty of Engineering Technology consists of the following six Academic Departments:
Agricultural and Plantation Engineering
Civil Engineering
Electrical and Computer Engineering
Mathematics and Philosophy of Engineering
Mechanical Engineering
Textile and Apparel Technology Each department is collectively responsible for all academic activities of the Faculty and functions under a Head. The Faculty Board of the Faculty of Engineering Technology regulates all academic activities in the Faculty, under the direction of the Senate of the OUSL. The Faculty also has a multi-disciplinary Engineering Research Unit (ERU) dedicated to enhance research in the Faculty and to provide a forum for discussion of matters pertaining to Engineering research. The Faculty also actively participates in work of the Rural Research Unit (RRU) of the University. This prospectus describes various academic programmes conducted by the Faculty of Engineering Technology and relevant information pertaining to these programmes.
The Study System The study system adopted by the Open University of Sri Lanka is based on multimedia instructional materials with strong emphasis on Distance Education techniques using printed material, on-line learning facilities and audio-visual aids. The Faculty of Engineering Technology is one of the pioneers, among all academic institutions in the world, in the
delivery of engineering programmes in distance education mode. The central component of Distant Education is the printed material that offers the student the equivalent to lectures in a conventional university. They also provide a series of carefully designed activities and self-assessment
- 2 -
questions, which help the student to develop analytical skills and independent thought. Printed material is supplemented by, audio-visual material, on-line classes, face to face discussions/clarification classes (Day-Schools), tutor clinics, laboratory work, fieldwork, on-line component and seminars. Laboratory work and field work form an integral part of most courses in technology and are compulsory. Pre-scheduled Day-Schools and Tutor Clinics are conducted by the academics for groups of students at Regional and Study Centres of the University. The OUSL is meant primarily for working students. Therefore, it is possible for a student to study while working, without much difficulty. Those students who have passed GCE (A/L) in the mathematics stream can join the Diploma/Degree programme directly. While the University is making every effort to schedule as many activities as possible during weekends and public holidays, certain activities such as laboratory classes and examinations may have to be scheduled during weekdays. Since the activity schedule for the whole year is given to the students at the beginning of the academic year, it is hoped that they can plan their work well in advance. A student joins the OUSL for a particular programme by fulfilling Entry requirements and registering for at least nine credits of courses in the programme of study in his/her first year of registration. To register for a particular course, the student should have fulfilled the given Prerequisites for that course, either by gaining Exemptions, or successful completion. Students are allowed to change their selection of courses after going through the study material, during the subsequent Add/Drop Period (usually one month after the last date for registration), without any penalty. From the last date of Add/Drop period, for a further one month students can withdraw from the courses which they are unable to handle. In this event, the first
instalment of fees already charged will be forfeited. Each course in a programme of study is assessed separately. Assessment consists of two components, namely Continuous Assessment
(CA) and Final Examination (FE). Continuous assessment is not merely a means of assessment; it is one of the significant means of facilitating learning. Activities such as laboratory work, field classes, tutor marked assignments (TMA), presentations, mini projects (MP) and continuous assessment tests (CATs) are integral parts of learning and assessment. A student is required to obtain a minimum mark of 40% in continuous assessment of a particular course, to be eligible to sit for the final examination. If this minimum mark is not obtained, the student is considered to have failed in that course and has to re-register in a subsequent year. In this event, the student can obtain only a simple pass (C) for the course after successful completion. A student gaining eligibility in a particular course is expected to sit the final examination in the same year. However, facing the final examination may be postponed to a subsequent year, within the valid period of eligibility (of up to a maximum of 3 academic years including the year the student obtained the eligibility).
Final assessment mark of any course depends on the performance at both the continuous assessment and the final examination. For the courses offered by the Faculty, these components carry equal weight. Therefore, students must practise continuous learning throughout the academic year, in order to attain success. Since a fair proportion of the activities used to impart knowledge in distance education have to be carried out by student, success is possible only if he/she is motivated to learn by him/her- self.
Structure of the Curriculum and Courses The curriculum of the Faculty of Engineering Technology ensures that the students receive an academically as well as professionally recognised qualification in a particular field. However, it still allows a student to structure the subject combinations and total duration of
study to suit individual needs. To gain a qualification with a particular specialisation, specific course combination stipulated for that specialisation needs to be fulfilled.
- 3 -
Courses
The fundamental entity in the dissemination process of knowledge is known as a “course” In other words, a course is equivalent to a subject.
Course Categories
Each course is classified into one distinct "Course Category" denoted by a specific letter.
Engineering X Engineering projects Y Mathematics Z Industrial studies I General J Computer literacy K English L Management M Training W
Course Levels
Each course is also assigned a "Level", between zero (0) and seven (7). The Level indicates the relative complexity of the course content. Level
0 indicates the beginner‟s level, while Levels 1 & 2 comprise the foundation for different programmes. Levels 3 to 6 are different stages in undergraduate study programmes leading to Certificate, Advanced Certificate, Diploma & Degree qualifications. Finally, the courses of postgraduate programmes are placed at Level
7.
Credit Rating
The Credit Rating assigned for a course reflects the amount of time an average student is expected to devote for its study. Total effective time expected to be spent by an average student for a course with a Credit Rating of one (1) is about 25 hours. The credit rating of a course can be computed by multiplying the fifth character in the Course
Code for that course by three (3). Ex: for the course MPZ3231 credit rating is 6(=2x3), which means the student is expected to spend about 150 (=6x25) hours of learning during the academic year
Credit Limit
The maximum number of credits a student can offer for an academic year is limited to thirty six
(36) from Regular Courses (X, Z, and I categories) and eighteen (18) from Continuing
Education Courses (Y, J, K, L, M, and W categories). However, the total number of credits that can be taken per academic year, from both the Regular and Continuing Education courses together, is limited to a maximum of forty five (45) credits. Thus, an average student opting to offer the maximum allowable credits (45) in an academic year would be expected to spend about 1125 effective hours for studies during the academic year (i.e. about 38 hours per week assuming 30 weeks of study in an academic year).
Departmental Codes
Further, the course codes also indicate the department offering the particular course. The codes allocated for the Departments of the Faculty are as follows:
Department/Faculty conducting the course
Code
Agricultural and Plantation Engineering
AE
Civil Engineering CE
Electrical and Computer Engineering EC
Mathematics and Philosophy of Engineering
MP
Mechanical Engineering ME
Textile and Apparel Technology TT
Faculty of Engineering Technology FE
Following are the codes for the Departments of the Faculty of Humanities and Social Sciences, and Faculty of Natural Sciences which offer certain courses for the Faculty of Engineering Technology:
Department Code Language Studies LS
Management Studies MS
Legal Studies LW
Social Studies SS
Physics PH
Chemistry CH
Zoology ZO
Botany BT
Mathematics & Computer Science PS
In addition to these codes, in the Faculty of Engineering Technology, some of the courses listed in the exemption list and prerequisites
- 4 -
start with the letters VR. The code VR corresponds to virtual courses. These courses do not exist physically. However, in certain instances when the students possess qualifications for which the Faculty cannot grant any exemption from an existing course, credit exemptions may be granted using virtual courses with appropriate category, level and credit rating.
Course Codes
The letters and numbers denoting the Departments, Categories, Levels, and Credit Rating make up the code for a course. e.g. Information from Course code CEX4231;
CE X 4 2 31 Department of Civil Engineering
Engineering Level 4 Credit rating 2x3 = 6
Serial no.
Information from Course code VRM6100;
VR M 6 1 00 Virtual Credit
Management Level 6 Credit rating 1x3 = 3
Serial no.
Study Programmes
Study Programmes are made up of different course combinations. For the award of a qualification through a programme such as a Certificate, Diploma or a Degree, three major considerations need to be fulfilled: i) A total stipulated number of Course
Credits required for an award should be acquired, while fulfilling the minimum requirements at different Levels.
ii) Minimum stipulated number of Course
Credits required for an award should be fulfilled by the student under each Course
Category at identified Levels. iii) In order for the student to qualify in a
Particular Field of Study, (e.g. Civil, Mechanical, Electrical, etc.), the list of Compulsory Courses required for an award in that field of study should also be satisfied.
Special Awards Students who have performed extremely well in degree programs are rewarded with gold medals. The gold medals awarded by the faculty are:
1. Kulshreshtha gold medal for the best student in Bachelor of Technology programme.
2. Thurairajah gold medal for the best final year project in Bachelor of Technology programme.
3. ERU gold medal for the Best paper published in ERU journal
4. Mrs. S.M. Abeygunesekera de Silva gold medal for the best student in Mechatronics Engineering stream.
5. Liyanaguruge Assie Annette de Silva Gold medal for the Best Student in Bachelor of Industrial Studies (Agriculture)
Exemptions
Students who have academic qualifications other than entry requirements (ex: NDT, B.Sc) may be granted exemptions according to their qualifications. Faculty approved exemptions are given in pages 39-43 and 54-56. If you possess any qualification other than these you can seek exemptions by sending duly filled application form given in appendix of this Prospectus (page 75) on or before specified date. Any exemptions granted will be informed at the time of registration.
Training
Apart from the academic courses, students who are following Diploma and Degree program should complete following four training modules: Basic Training I – 10 days Basic Training II – 08 days Specific Training I – 15 weeks Specific Training II – 15 weeks The students undergo two basic training modules in the University (Colombo, Kandy, Matara, Batticaloa regional centres) and for the specific training, they are placed in different reputed public and private organisations. Students who register for training should have enough time to devote for these training modules. Therefore, students are advised to register for training by considering their other commitments such as employment, number of courses registered, etc.
- 5 -
However, those who are working in industries relating to the particular field may seek exemptions for specific training. Further details are available with Training Engineer who looks after the matters
related to the specific training by contacting through Tel. 011-2881223.
Student Services
Regional Educational Services
The Regional Educational Services (RES) of the OUSL provides support services required by the Faculties to conduct their academic programmes.
The OUSL regional network consists of twenty four Regional and Study Centres spread throughout the country. The six Regional Centres are in Anuradhapura, Batticaloa, Colombo, Jaffna, Kandy, and Matara, while the eighteen Study Centres are located at Ambalangoda, Ampara, Badulla, Bandarawela, Monaragala, Galle, Gampaha, Hatton, Ambalantota, Kalutara, Kegalle, Kuliyapitiya, Kurunegala, Polonnaruwa, Puttalam, Ratnapura, Trincomalee and Vavuniya. The Director of Regional Educational Services, who is in charge of all activities of the Regional Education Services, is attached to the Central Campus at Nawala. Six Assistant Directors separately administer the six Regional Centres. The Study Centres are administered by
Regional Officers in charge of the Centres, or by full time co-ordinators. Given in the following tables are the contact details of the Regional Centres and Study Centres:
Regional Centre
Address Telephone
Anuradhapura Jayanthi Mawatha, Anuradhapura
025-2222871
Batticaloa 23, New Road, Batticaloa 065-2222264
Colombo Nawala, Nugegoda 011-2853930 011-2881281 011-2881360 011-2881380
Jaffna Browns Road, Kokkuvil, Jaffna
021-2223374
Kandy Polgolla, Kandy 081-2499370 to 2499372 081-2494083
Matara Nupe, Matara 041-2222943
Study Centre Address Telephone
Ambalangoda 80/1, Polwatta Road, Halwathura, Ambalangoda
091-2258585
Ampara Inginiyagala Road, Samapura, Ampara
063-2222052
Badulla Advanced Technical Institute, Badulla
055-2223818 055-2230218
Bandarawela St. Thomas Road, Wewatenna, Bandarawela
057-2222820
Monaragala Technical College Junction, Sirigala, Potuvil Road, Monaragala
055-2277395
Galle Labuduwa, Galle 091-2223784
Gampaha Gampaha Road, Miriswatte, Mudungoda
033-2234571 033-2234572
Hatton Thondaman Vocational Training Centre, Hatton
051-2225139 051-2223492
Ambalntota Rajasaranagama Road Lunama South Ambalnthota
047-2225533
Kalutara 66/2, Nagoda Road, Kalutara South
034-3949160
Kegalle Kumaratunga Munidasa 035-2222501
Trincomalee
Vavuniya
Polonnaruwa
Kurunegala
Kuliyapitiya
Badulla
Ampara
Hatton
Anuradhapura
Study Centres
Bandarawela
Gampaha
Ratnapura Kalutara
Ambalangoda
Galle
Ambalantota
Kegalle
Monaragala
Puttalam
Colombo
Matara
Kandy
Batticaloa
Jaffna Regional Centres
- 6 -
Mawatha, Kegalle
Kuliyapitiya Technical College, Kuliyapitiya
037-2281181 037-2281271
Kurunegala Negombo Road, Malkaduwawa, Kurunegala
037-2223473
Polonnaruwa 24th Post, Bendiwewa, Jayanthipura Pollonnaruwa
027-2225776
Puttalam Colombo Road, Puttalama
032-2266822
Ratnapura Hidellana, Ratnapura 045-2228660
Trincomalee St. Francis Zavier Maha Vidyalam Main Street, Trincomalee
026-3264813
Vavuniya No: 3666, Kandy Road, Tekkawaththai, Vavuniya
024-2222995
Student Affairs Division
The Student Affairs Division maintains the personal and academic records of all OUSL students. Any change of address, medium of study, study centre, civil status, e-mail address, withdrawal from courses, etc., should be immediately informed in writing to:
Senior Assistant Registrar, Student Affairs Division, The Open University of Sri Lanka, P. O. Box 21, Nugegoda - 10250
When writing the letter, the student's name, registration number and the programme of study must be indicated. The telephone number of the Student Affairs Division is 011-2823920.
Counselling
General counselling by the Faculty staff on academic matters is available to all prospective applicants and students. You could contact the Faculty office (Tel.: 011 2881283 / 011 2881228 / 011 2881351) for this purpose. Further, Student Counsellors of the Faculty may be contacted for all non-academic matters. The Faculty Student counsellors are; Dr. (Mrs.) HKLK Gunasekara Senior Lecturer Department of Agricultural and Plantation Engineering Tel.: 011 2881062 Eng. Dr. DAR Dolage (Senior Student Counsellor) Senior Lecturer Department of Civil Engineering Tel.: 011 2881289 Eng. Gihan Anthonys Lecturer (Probationary) Department of Electrical and Computer Engineering
Tel.: 011 2881272 Mr. SM Lal Chulawansa Senior Educational Assistant Department of Mathematics and Philosophy of Engineering Tel.: 011 2881441 Eng. Dr. DHRJ Wimalasiri Senior Lecturer Department of Mechanical Engineering Tel.: 011 2881393 Mr. LSA Perera Lecturer Department of Textile and Apparel Technology Tel.: 011 2881310
Library Facilities
Students have access to the main library of the University at Nawala and to the five regional libraries at Anuradhapura, Kandy Matara, Batticaloa and Jaffna Regional Centres. Lending facility to students is limited to two books at a time, and requires a deposit and is available at main library, Kandy, Matara and Anuradhapura libraries. The main library is well resourced, and open throughout the year except on the seven "University Holidays" and a few days during the Sinhala and Tamil New Year and Christmas.
The main library has an Audio-Visual Resource Centre (AVRC) with a substantial collection of video and audio material in many subject areas for the use of students. Access to internet, WIFI coverage and photocopying facilities are also available. The regional and study centres also have a small collection of books, and audio-visual material, mainly for reference.
- 7 -
Elementary Computer Labs
Computer facilities are available at a number of Regional and Study centres free of charge. These are at Ambalangoda, Anuradhapura, Bandarawela, Batticaloa, Colombo, Galle, Kandy, Kegalle, Kurunegala, Matara Polonnaruwa and Ratnapura. Limited Internet facilities are available at Colombo, Kandy, Matara, Anuradhapura and Batticaloa Regional Centres and certain study centres.
Facilities provided by NODES
National Online Distance Education Service (NODES) is a self sustainable unit under Ministry of Higher Education. The NODES has 26 NODES Access Centres called NACs. The main purpose of the NACs is to provide access to all students registered for online programs offered by all partner institutions of NODES. As OUSL is also one of the partners of NODES the students of the faculty have opportunity to access online material through NAC. Besides, these centres have other facilities, such as video conferencing, (internet, e-mail), photocopying, fax, scanning and printing at a fee. NODES encourages the use of these centers for accessing online material and other activities related to open and distance learning. Twenty out of 26 NACs have been set up within the OUSL Regional and Study Centres covering many districts of the country. Other six centres are located, two in the premises of University of Colombo (Weligaththa and Colombo), one within the premises of University of Peradeniya, two within the premises of Sri Lanka Institute of Advanced Technological studies (Badulla and Bandarawela) and one within the premises of Institute of Engineering Technology (Katunayake).
Laboratories
Laboratory facilities for most courses are available only at the Colombo Regional Centre at Nawala. However, laboratory work in the courses up to level 3 and a few higher level courses may be conducted at the Regional Centres and selected Study Centres, if the number of students registered for a particular course for that centre is more than 15.
Canteens
Food can be purchased from the University canteens at reasonable prices. Canteens are available at Colombo, Kandy and Matara Regional Centres. These provide services throughout the week.
Postal Service and Telephone Call Boxes
The University has its own sub-post office at the premises of the Colombo Regional Centre, along D. M. Colombage Mawatha, Nawala. Call boxes are available in the Colombo, Kandy and Matara Regional Centres.
Temporary Residential Facilities
The University provides temporary residential facilities at Colombo, Kandy and Matara Regional Centres for a limited number of students attending approved academic activities.
Student Union
The Faculty Student Union is elected by and from amongst the students of the Faculty. The University Student Union is constituted by the four Faculty Student Unions. Moreover, two representatives are elected by the students of the Faculty to the Board of the Faculty of Engineering Technology.
Banking Facilities
A branch of the People's Bank is situated within the premises of the Colombo Regional Centre.
- 8 -
World University Service (WUS) Shop
Students can purchase stationery and consumable items, at reasonable prices, from the WUS shops which are located in the Colombo and Kandy Regional Centres.
OUSL Bulletin
The OUSL publishes biannually, bulletin for distribution among all its registered students. It carries articles, general news about the OUSL activities, and other information useful for staff and students.
Student Commitment If you are looking for an opportunity to learn about something that interests you, an opportunity that you never really had, the OUSL may be the place for you. We would do our best to facilitate your learning, but the hard work is up to you. If you are to make use of this opportunity, you need to be prepared to make some sacrifices. You have to be self-motivated, and be prepared to sacrifice part of your leisure, at least for a few years. If you are motivated to make the best of what is offered, we will attempt to provide you with the means of achieving the highest academic and professional goals, irrespective of your present status. Our programmes of study allow you to build on your present achievements, and advance in your career systematically, as you progress in your learning. It would be a mistake on your part if you expect the OUSL to enable you to gain a qualification without putting in a substantial amount of hard work.
Working students may find it is difficult to obtain leave of absence from work to attend to some of the compulsory activities that make up a particular course. However, as the calendar giving the attendance requirements is usually announced well in advance, it is possible to
select the courses to minimise these problems. You should pay particular attention to this, at the time you register for courses at the beginning of each academic year. In the case of some activities, such as laboratory classes, you may also have a choice in the selection of dates and times. Unfortunately, this is not possible in the case of tests, presentations and examinations, as these activities involve other students as well.
The OUSL expects its students to interact closely with the world of work. The fact that the University was primarily established to addresses the needs of working students cannot be over emphasised. As such, we do make an extra effort to accommodate the particular situation of such students. However, the students too should plan their programme, taking note of the fact that there cannot be any flexibility in arranging certain activities. Therefore, when selecting the courses to be offered in a particular year, you are advised to consider your commitment in terms of time and money. For example, a student registering for thirty six (36) credits of regular courses per year will need to devote about nine hundred (900) hours of his free time for self-study during the academic year. This is about 30 hours a week for 30 weeks (i.e. about 4 hours per day). Those
- 9 -
who are unable to find the required time should register for lesser number of credits. Similarly, as the tuition fee is computed based on the number of credits offered, you can plan
your selection based on the amount of money you could afford for that particular year. Thus you may follow a programme of study at your own pace depending on time and money available.
Student Fees Unlike the other national universities in Sri Lanka, the OUSL does charge fees from its students. This is related to the fact that the OUSL was set up primarily to cater to the needs of employed students. As these students would naturally be earning at least a modest income, it was felt that the decision to levy fees might be justified. However, there is no intention of recovering the full cost of education from the students. As at today, the income from fees meets only a fraction of the total expenditure of the University. The Government, by grants disbursed through the University Grants Commission, meets the major component of the total expenditure. The fees payable by a registered student includes, registration fee, facilities fee, exemption fee (where applicable), library facility fee and tuition fee. The Registration fee (of Rs. 250/=for certificate, diploma and undergraduate programmes; Rs. 360/= for postgraduate programmes) is charged to cover the administrative expenditure involved in student registration. The Facilities fee (of Rs. 900/=) is used to provide certain facilities for the students and is a fixed amount payable by all registered students irrespective of the number of courses offered. The Library Facility fee (of Rs. 100/= for certificate, diploma and undergraduate programmes; Rs.200/= for postgraduate programmes) is charged at the time of first registration. The Exemption fee (of Rs.10/= per credit) is only charged if exemptions are granted. The Tuition fee depends on the credit rating and the Level of the course offered. Of the total tuition fee for a year 60% should be paid at registration and the balance to be settled at the payment of second instalment about half way into the academic year. However, the other fees must be paid at the time of registration. The
tuition fees applicable for different levels are as given in the following table.
Level Tuition fee per credit
0 Rs. 294.00
1 Rs. 294.00
2 Rs. 294.00
3 Rs. 368.00
4 Rs. 368.00
5 Rs. 664.00
6 Rs. 664.00
7 Rs. 2238.00
However, the fee for the Research Project in the Master of Technology programme is Rs. 610/= per credit. Further, the students registering for the Basic
training courses (MEW3101 and MEW3102) are required to pay an additional sum of Rs. 850/= for each of the two Basic training courses. In addition to Colombo Regional Centre, Basic Training facilities are available at Kandy, Matara and Batticaloa Regional Centres. In addition to that students registering for the course TTJ3146 Fashion Illustration conducted by the department of Textile and Apparel Technology are required to pay an additional sum of Rs. 1500/= Students registering for the first time with the Faculty and those who have not completed courses amounting to 12 credits in X category would be required to register for the course FEJ0010 – Learning to learn at a distance and would be required to pay an additional sum of Rs. 1500/= as the tuition fee for this course. The various types of fees given above are applicable for the academic year 2011/2012. They may be subject to change in subsequent years.
Scholarships
The University has a limited number of bursaries, including Mahapola Scholarships, and university bursaries, to help students who
- 10 -
are in need of financial help to continue their studies. Unfortunately, above mentioned bursaries are not available during the first year of study at the University. Only students who have demonstrated a certain amount of commitment to their studies and achieved a measure of success during the first year can be considered for bursaries. Students will be given guidelines for these Scholarships with the scholarship application form at the time of re-registration. The completed application forms should be submitted on or before the given date to the Assistant Registrar, Faculty of Engineering Technology, The Open University of Sri Lanka, Nawala.
The University is aware that its bursary scheme is inadequate to meet the needs of all the students, and is striving to increase the resources available to its bursary fund. In addition to the above, software companies provide some scholarships and also placements in the industry itself to work while you are studying. These will be available for the students who are in the Computer Engineering stream and will be selected by the company through an interview. Students who perform well in completing their courses at levels 3 and 4 will be nominated for these scholarships and industrial placements.
11
Programmes Offered by the Faculty
The Faculty of Engineering Technology offers a wide variety of programmes from Certificates, Advanced Certificates through Diplomas, Degrees, PG Diplomas, Master of Technology to the research degrees; Master of Philosophy and Doctor of Philosophy. Faculty also offers courses at the Foundation level to enable prospective students who have not fulfilled entry requirement to enter the programmes offered by the Faculty.
If you are interested in learning about technology, it is very likely that there is a programme to suit you. The programmes offered by the Faculty and their respective target clientele are given below:
Foundation Level Courses
Foundation level courses are offered by the Faculty to enable students without adequate academic qualification to enter the Advanced Certificate, Diploma and Degree programmes, and through that, all higher degree programmes. Currently the Faculty offers five Foundation level courses. They are:
Basic mathematics
Pure mathematics
Applied mathematics
Properties of materials
Physics for technology
Certificate Programme
Certificate in Industrial Studies programme is designed for those who are employed in the textile and other specific industries and those who wish to enter a particular industry. In
addition to that, credits obtained from certificate programme can be used as an entry qualification for Diploma programmes, if an applicant does not have an adequate qualification to enter. Currently the Faculty offers this programme in the following specialisations:
Animal Husbandry and Aquaculture (offered only at Puttlam centre)
Apparel Technology
Textile Technology
Advanced Certificate Programme
Advanced Certificate in Technology programme is designed for those who are involved in technological industries and those who wish to enter a particular industry to begin a career, including school leavers interested in technology. Since this programme is an integral part of the Diploma in Technology programme, students following Diploma programme can obtain the Advanced Certificate in Technology on their way to the Diploma. Currently Advanced Certificate in Technology can be obtained in following areas:
Civil Engineering
Electrical and Electronic Engineering
Mechanical Engineering
Mechatronics Engineering
Textile Engineering
Diploma Programmes
These programmes are ideal for industrial workers. If you do not possess entry qualifications to enter this programme directly, you can do so through the foundation level courses. These programmes may also appeal to school leavers who intend to pursue a career in Engineering Technology. Currently the Faculty offers Diploma programmes in the following two streams:
Diploma in Technology
Diploma in Industrial Studies The specialisations available in the Diploma in Technology programme are:
Civil Engineering
- 12 -
Computer Engineering
Electrical Engineering
Electronic and Communication Engineering
Mechanical Engineering Mechatronics Engineering
Textile Engineering Diploma in Industrial studies could be pursued in one of the following specialisations:
Agriculture
Apparel Production and Management
Fashion Design & Product Development
Textile Manufacture
Degree Programmes
These programmes are suitable for middle level technical officers, usually holding a Diploma or an equivalent qualification, who wish to upgrade themselves to Degree level. They are also suitable for graduate engineers who wish to specialise in another discipline. Currently the Faculty offers three types of degree programmes:
Bachelor of Technology (Engineering)
Bachelor of Industrial Studies
Bachelor of Software Engineering The specialisations available in the Bachelor of Technology (Engineering) programme are:
Civil Engineering
Computer Engineering
Electrical Engineering
Electronic and Communication Engineering
Mechanical Engineering
Mechatronics Engineering
Textile Engineering The degree of Bachelor of Technology of the OUSL (B. Tech.) is recognised by the Institution of Engineers Sri Lanka (IESL) as a fulfilling academic qualification for Associate Membership. Further, the B.Tech. Degree is
equivalent to engineering degrees offered by the other state universities.
Bachelor of Industrial studies could be pursued in one of the following specialisations:
Agriculture
Apparel Production and Management
Fashion Design & Product Development
Textile Manufacture In addition, Bachelor of Software Engineering programme is offered through the Faculty. Documentation on this programme can be obtained separately.
Postgraduate Programmes
These programmes are designed for qualified Engineers desirous of postgraduate education and skills in a particular speciality. The Faculty currently offers PGDipTech (Postgraduate Diploma in Technology) and MTech (Master of Technology) in three different areas:
Construction Management
Industrial Engineering
Apparel Production and Management
Postgraduate Research Degrees
Postgraduate research degrees are suitable for well-qualified Engineers interested in research. The Faculty offers two types of research degrees:
Master of Philosophy
Doctor of Philosophy
Stand Alone Courses
Stand Alone Courses are ideal for those interested in a specific quantum of knowledge or skills. Any of the regular courses can be offered as Stand Alone Courses, without registering for a regular programme, provided the student has the necessary prerequisite knowledge.
- 13 -
Academic Departments
Agricultural and Plantation Engineering
The department offers Diploma and Bachelor of Industrial Studies (Agriculture) Programmes which are biology based. Courses offered range from Crop Production, Plant and Soil Science, Hydrology and Water Resources, Groundwater Resources, Climate change, Postharvest Biology and Technology, Farm Power and Machinery, Food Processing, Animal Husbandry, Fisheries and Aquaculture, Indigenous Knowledge of Herbal Products, Agricultural Extension and Agricultural Economics & Management. This department also offers Certificate in Industrial Studies (Animal Husbandry & Aquaculture), only at Puttlam Study Centre.
The department has a reasonably equipped laboratory and well qualified staff, who in addition to teaching, supervise MPhil/PhD students and are also engaged in various other activities contributing to national development.
Civil Engineering
The Department of Civil Engineering enhances your prospects for employment and opportunities for higher learning in the field of civil engineering which provides for infrastructure facilities in a country.
The Department offers Advanced Certificate, Diploma and Bachelor of Technology programmes in Civil Engineering. Further, the postgraduate programmes in Construction Management offered by the Department are designed to enable qualified engineers to enhance their knowledge and qualifications in this particular area by achieving a Postgraduate Diploma and a Master of Technology Degree.
While addressing traditional Civil Engineering subjects in the broad areas of Construction Materials, Structural Analysis & Design, Soil & Geotechnical Engineering Hydraulics & Irrigation Engineering, Land & Quantity Surveying, Highway and Transportation Engineering and Construction Engineering, social, economic and environmental issues are
- 14 -
also considered in the development of curricula for programmes offered by the Department.
As a result, management of human resources,
carrying out an environmental impact assessment, the use of information technology
such as geographic information systems &
global positioning systems and the economic analysis of projects are some of the additional skills that are included in the Civil Engineering programmes. While the Civil Engineering programme consists of a compulsory core group of subjects, it also allows students to select optional courses drawn from various specialised areas. Students are encouraged to choose a combination of courses that best suits their requirements.
Academically as well as professionally qualified staff of the Department of Civil Engineering are committed to prepare you for work in the field. All courses contain practical components – such as laboratory work, field work, field visits and engineering designs – in addition to theory, so that you will be better prepared for this challenge. The seven months of specific training will give you an opportunity to observe how concepts learnt in theory are put into practice. The Project, which has to be taken towards the end of the programme, is the culmination of your studies. This Project enables you to demonstrate and prove your ability to apply the knowledge gained in solving real world engineering problems.
Electrical and Computer Engineering
The mission of our undergraduate programs is to provide a flexible curriculum in fundamental and advanced topics in electrical, electronics, communication and computer engineering.
The courses offered for Computer Engineering integrate both software and hardware aspects of computing. Graduates can work in the fields of Software Engineering, Computer Networking or Computer hardware. The courses offered in Electronics & Communication allow the students to pursue career related designs of electronic systems and equipment maintenance. It also gives the required theoretical and practical know-how to embark on careers in rapidly growing fields in Telecommunications and Modern data networking such as Telephony, TV, Radio broadcasting, Satellite communications and Mobile communications. The Electrical Engineering courses are focused on planning, design, construction, operations & controls in the fields of electricity generation, Transmission & Distribution. The students have the opportunity to learn Power systems planning, High voltage engineering, Electrical machines, Power systems & Electrical installations etc., during the study period. With the specialised training they get, graduate students are well groomed to face the future challenges and work confidently in the field of electrical engineering.
- 15 -
The department also offers a degree programme leading to award of Bachelor of Software Engineering (BSE). Further information about this programme is available separately (www.ou.ac.lk/eng/elec)
Mechanical Engineering
The Department of Mechanical Engineering provides the students with opportunities to advance themselves in their careers and become graduate engineers in the specialities of Mechanical Engineering and Mechatronics Engineering.
The students opting to do mechanical engineering stream have the option to select courses in automobile engineering, manufacturing engineering and combination of both to meet their specific requirements. The theoretical components of these specialisations are amply supported with exposure to practical situations, in our reasonably well-equipped laboratories. Mechatronics engineering is the newest stream offered by the department with the objective of
producing well trained Mechatronics engineers/technical personnel and is introduced for the first time to the engineering curricula in Sri Lanka. It deals with an integrated design approach involving mechanical, electronics, and controls engineering in finding solutions to the modern industry as well as meeting commercial needs.
In addition to the above programmes the Department conducts a Postgraduate Diploma and a Master of Technology programme in Industrial Engineering.
The Department from 2008 facilitates conducting of the worldwide MSc programme in Sustainable Energy Engineering (SEE Worldwide) offered by the Royal Institute of Technology (KTH) together with University of Gavle in Sweden. The programme is offered at no cost to the students. All mandatory courses are offered on-line and lectures can be followed either at the time of the delivery of the lectures on-line or afterwards through recorded media.
Textile and Apparel Technology
Department of Textile and Apparel Technology of the Open University of Sri Lanka offers a wide variety of programs in the fields of Textile
- 16 -
and Apparel Technology. These programs extend over a range from Certificate, Diploma, Degree and Master Degrees to higher degree programs such as Master of Philosophy and Doctor of Philosophy.
The Department of Textile and Apparel Technology offers programmes in four specialised areas: Textile Engineering, Textile Manufacture, Fashion Design & Product Development and Apparel Production and Management. These programmes are carefully designed to meet the current requirements of the Sri Lankan Textile and Apparel industry. A small percentage of our students are school leavers, and many are working in the industry. Each year, increasing number of students join the industrial studies program, after completing the National Diploma in Technology (NDT) program at the Institute of Technology of University of Moratuwa and also after completing our own Diploma in Industrial studies program. Further, students who have successfully completed Diploma courses (in the related fields), conducted by approved institutions, can also enter our undergraduate programs directly. The department is also involved in extension activities to the industry in the form of short courses and consultancies. The department is endowed with differently qualified staff with wide experience in various fields of studies. The department is prepared to undertake tailor made courses for the individual needs of any organisation and is also involved in research activities in textile, apparel and distance education fields. The postgraduate programme leading to a Master in Apparel Production and Management is aimed at executive and supervisory staff, with undergraduate qualifications in the textile and apparel sector, who intend to enhance their managerial knowledge and skills.
The newly developed undergraduate programme in the area of Fashion Design & Product Development is offered this year. It is aimed to train people on the aspects of Fashion Product Development.
It is heartening to note that our graduates and diplomates are well accepted by the industry within Sri Lanka and internationally.
Mathematics and Philosophy of Engineering
The Department of Mathematics and Philosophy of Engineering provides you knowledge to enhance your capacity of working as engineers and technologists effectively in complex societies where technology constantly influences and get influenced by social, environmental, cultural and economic factors. The Department offers courses under two streams of studies; mathematics and philosophy of engineering. Mathematics courses offered by the Department are designed to provide the mathematics knowledge required by all students following all programmes offered by the Faculty of Engineering at all levels, as well
- 17 -
as to provide life long mathematics skills required as a citizen of the world.
Under the Philosophy of Engineering stream the Department offers subjects at Diploma, Graduate and Post-graduate levels to raise awareness of students on a range of themes; the connectedness of technology, society and the environment, linkages of technology with development, nature of science and mathematics, history of technology within local and global contexts, opportunities and constraints of technology, major social and environmental debates in relation to technology, etc. In addition to offering courses on mathematics and Philosophy of Engineering, the Department is also planning to offer a Certificate Programme in Industrial Studies on Small Scale Renewable Systems and Energy Savings in collaboration with other departments of the Faculty of Engineering Technology.
18
Staff of the Faculty
Faculty Office
Prof. Dr.-Ing. WA Wimalaweera Dean of the Faculty
Ms. Erandi Wagalath Assistant Registrar
Heads of the Departments
Eng. PD Sarath Chandra Head (Acting), Department of Agricultural and Plantation Engineering
Eng. Prof. TM Pallewatta Head, Department of Civil Engineering
Dr. KAC Udayakumar Head, Department of Electrical and Computer Engineering
Mr. BD Witharana Head, Department of Mathematics and Philosophy of Engineering
Eng. (Mrs.) PR Dadigamuwa Head, Department of Mechanical Engineering
Dr. Dipl-Ing. GB Delkumburewatte Head, Department of Textile and Apparel Technology
19
Department of Agricultural and Plantation Engineering
Prof (Mrs.) CS De Silva, BSc Agri (Hons) (Peradeniya), MPhil (Peradeniya), PhD (Cranfield)
Professor in Agricultural and Plantation Engineering
Dr.(Mrs.) HKLK Gunasekara BSc Agri (Hons) (Peradeniya), PhD (Peradeniya)
Senior Lecturer – Gr II
Dr. (Mrs.) AGB Aruggoda BSc Agri (Hons) (Peradeniya), PhD (SCAU)
Senior Lecturer – Gr II
Mrs. HMUN Herath BSc Agri (Hons) (Peradeniya), MA in Linguistics (Kelaniya)
Lecturer
Mrs. NS Weerakkody BSc Agri (Peradeniya), MSc (Peradeniya)
Lecturer (Probationary)
20
Department of Civil Engineering
Eng. Prof. TM Pallewatta BSc Eng (Hons) (Moratuwa), MEng (AIT), DrEng (Tokyo), Int. PEng (SL), CEng FIE (SL), FIAE (SL)
Assoc. Professor in Civil Engineering
Head of the Department
Eng. Prof. KS Weerasekera BSc Eng (Moratuwa), MEngSc (UNSW), PhD (UNSW), FIE (SL), Int. PEng (SL), CEng, MIE (Aust), CPEng, MIHT (UK), MASCE
Professor in Civil Engineering
Eng. (Mrs.) MN Tantirimudalige BSc Eng (Hons) (Sri Lanka), MTech (OUSL), MIE (SL), MICE, CEng
Senior Lecturer – Gr I
Dr. J Liyanagama MSc (Eng) (Hons) (Moscow), PhD (Moscow)
Senior Lecturer – Gr I
Dr. PN Wikramanayake BSc Eng (Hons) (Peradeniya), MSc (MIT), PhD (MIT), MIE (SL), CEng
Senior Lecturer – Gr I
Dr. HGPA Ratnaweera BSc Eng (Hons) (Moratuwa), MS (NJIT), PhD (NJIT)
Senior Lecturer – Gr I
Eng. Dr. DAR Dolage Bsc Eng (Moratuwa), MSc (Reading), MBA (SJP), MA (Colombo), DBA(Uni SA), FIE (SL), CEng
Senior Lecturer – Gr I
Dr. AGK De S Abeysuriya BSc Eng (Hons) (Ceylon), MSc (Leeds), PhD (Leeds), MIHT (UK), MCIT (UK)
Senior Lecturer – Gr I
Dr. (Mrs.) BC Liyanage Athapattu BSc Eng (Moratuwa), MEng (Osaka), PhD (Osaka), MIE(SL), CEng
Senior Lecturer – Gr I
Eng. LSS Wijewardena BSc Eng (Hons) (Peradeniya), MENG(AIT), MIE(SL),CENG, MIHT(UK)
Senior Lecturer – Gr I
Dr. (Mrs.) PSD Aluwihare BSc Eng (Hons) (Peradeniya), MSc (Saitama), PhD (Saitama)
Senior Lecturer – Gr II
Eng. (Mrs.) LA Udamulla BSc Eng (Hons) (Peradeniya), MPhil (Hong Kong), AMIE(SL)
Senior Lecturer – Gr II
Eng. MNC Samarawickrama BSc Eng (Hons) (Moratuwa), MSc (Peradeniya), MBA (Moratuwa), MIE(SL), CEng, MGS(SL)
Senior Lecturer – Gr II
Eng. Dr. TC Ekneligoda BSc Eng (Hons) (Moratuwa), MPhil (Moratuew), M.Sc (KTH, Stockholm), PhD (KTH, Stockholm), AMIE(SL)
Senior Lecturer – Gr II
Eng. DI Fernando BSc Eng(Hons) (Moratuwa), MSc (Moratuwa)
Lecturer (Probationary)
Eng. MM Jayathilake BSc Eng (Moratuwa), AMIE (SL)
Engineering Teaching Assistant – Gr.I
21
Department of Electrical and Computer Engineering
Dr. KAC Udayakumar MSc Eng (Hons)(Moscow Power Engineering Institute), PhD (Moscow Power Engineering Institute) Senior Lecturer – Gr II Head of the Department
Prof. H Sriyananda BSc Eng (Ceylon), MSc (Salford), PhD (Wales), CEng, MIE(SL)
Emeritus Professor
Eng. CJSAH Perera BSc Eng (Hons) (Moratuwa), MSc (Munich), MIE (SL), CEng
Senior Lecturer – Gr I
Dr. LSK Udugama MSc (Donetsk polytechnical Institute ), PhD (Donetsk polytechnical Institute), MIEEE
Senior Lecturer – Gr I
Eng. LA Samaliarachchi BSc Eng (Hons) (Moratuwa), MEng(AIT), CEng
Senior Lecturer – Gr I
Eng. SN Wickramasinghe BSc Eng (Hons) (Peradeniya), MSc (London), MIE (SL),CEng, MIET
Senior Lecturer – Gr I
Eng. Dr. (Mrs.) KGHUW Rathnayake BSc Eng (Hons) (Moratuwa), PhD (Murdoch)
Senior Lecturer – Gr II
Eng. (Mrs.) H Pasqual BSc Eng (Hons) (Moratuwa), MEng(Saitama)
Senior Lecturer – Gr II
Dr. (Mrs.) DDM Ranasinghe BSc (Hons) (Colombo) PhD (OUSL)
Senior Lecturer – Gr II
Dipl. Ing. KARD Gunaratne Dipl. Ing. (Ilmenau)
Lecturer
Eng. MH Naushath B.Tech (Eng) (Hons)(OUSL), AMIE (SL)
Lecturer (Probationary)
Eng. G Anthonys B.Tech. (Eng) (Hons) (OUSL), B.Sc. (Applied Science) (SJP),,MSc (Moratuwa), AMIE(SL), MBCS
Lecturer (Probationary)
Eng. JC Geeganage B.Tec (Eng) (Hons),(OUSL) AMIE(SL), MIEEE
Lecturer (Probationary)
Eng. CJ Basnayakege B.Tech(Eng)(Hons)(OUSL), AMIE(SL), MIEEE, MBCS
Lecturer (Probationary)
Eng. (Miss) TCPK Wickramsinghe BTech(Eng)(Hons)(OUSL) , AMIE (SL)
Lecturer (Probationary)
Eng. (Miss) SADAN Dissanayake BTech(Hons)(Eng)(OUSL) , AMIE (SL)
Lecturer (Probationary)
22
Department of Mathematics and Philosophy of Engineering
Mr. BD Witharana B.Sc. Eng (Hons)(Moratuwa), M.Phil (OUSL)
Senior Lecturer – Gr. II Head of the Department
Eng. Prof. APK De Zoysa BSc Eng (Hons) (Peradeniya), MSc(London), DIC(London), PhD (Colombo), M.Inst.Energy(UK), CEng Professor in Mathematics and Philosophy of Engineering
Mr. JADFM Jayatillake BSc Special (Hons) (Colombo), MA (Delhi)
Lecturer
Mrs. ND de Silva BSc Agri. (Hons) (Peradeniya), MSc Agri (Peradeniya)
Lecturer (on study leave)
Mrs. NK Herath BSc Eng (Hons) (Peradeniya), MSc Eng (Moratuwa)
Lecturer (Probationary) (on study leave)
Mrs. YAGS Yapa BSc. Eng (Hons) (Moratuwa)
Lecturer (Probationary)
Mr. CPS Pathirana B.Sc Special (Hons)(Ruhuna), M.Sc (SJP)
Lecturer (Probationary)
Mr. G Nandasena BSc Special (Hons) (Colombo)
Lecturer(Probationary)
Eng. SM Lal Chulawansa BSc Eng (Peradeniya)
Senior Educational Assistant
23
Department of Mechanical Engineering
Eng. (Mrs.) PR Dadigamuwa BSc Eng (Hons) (Moratuwa), MPhil (OUSL), MIE(SL), CEng
Senior Lecturer – Gr I Head of the Department
Eng. Dr. HD Goonetillake BSc Eng (Hons) (Sri Lanka), MASc (British Columbia), PhD (British Columbia), MIE (SL), CEng
Senior Lecturer – Gr I
Eng. PD Sarath Chandra BSc Eng (Sri Lanka), MSc Eng (Moratuwa), MIE (SL), MIEE (UK), MIMechE (UK), MIAE(SL), CEng
Senior Lecturer – Gr I
Eng. WRGA Wijesundara BSc Eng (Hons) (Sri Lanka), MPhil (OUSL), MIE(SL), MIAE (SL), CEng
Senior Lecturer – Gr I
Dr. SAMANS Senanayake BSc Eng (Hons) (Moratuwa), MSc (Cranfield), PhD (Cranfield)
Senior Lecturer – Gr I
Eng. (Mrs.) TSS Jatunarachchi BSc Eng (Hons) (Moratuwa), MPhil (OUSL), AMIE(SL)
Senior Lecturer – Gr I
Eng. (Mrs.) TMDN Medagedara BSc Eng (Hons) (Peradeniya), MPhil (SHU)
Senior Lecturer – Gr II
Eng. WR de Mel BSc Eng (Moratuwa), MSc (Peradeniya), MEng(NUS)
Senior Lecturer – Gr II
Mr. DC Wijewardena BTech (Eng) (Hons) (OUSL), MASc(British Columbia)
Senior Lecturer – Gr II
Eng. Dr. SDR Perera MSc (Hons) (Odessa), MPhil (OUSL), PhD (SHU)
Senior Lecturer – Gr II
Eng. Dr. DHRJ Wimalasiri BTech (Eng) (Hons) (OUSL), PhD (SHU),
AMIE(SL) Senior Lecturer – Gr II
Eng. JHSK Jayamaha BSc Eng (Peradeniya), PGDip.Comp (Colombo), MSc Eng (Wolverhampton), AMIE (SL)
Lecturer
Eng. VR Jayasekara BSc Eng (MSTUCA), MSc (INHA)
Lecturer
Mr. PGD Siriwardena BTech (Eng) (Hons) (OUSL), BSc (Peradeniya),
AMIE (SL)
Lecturer (Probationary)
24
Eng. (Mrs.) IU Aththanayake BSc Eng(Hons) (Peradeniya)
Lecturer (Probationary)
Eng. (Mrs.) EMHSK Ekanayake BSc (Eng), M Tech (IE), AMIE(SL)
Lecturer (Probationary)
Eng. (Miss) K Vamathevan BSc Eng (Hons) (Moratuwa), AMIE(SL)
Lecturer (Probationary)
Eng. (Mrs.) K. Sriskandarajah BSc Eng(Hons) (Peradeniya), PGDip(OUSL), AMIE(SL)
Lecturer (Probationary)
Eng. HDNS Priyankara B Tech Eng (Hons),(OUSL, AMIE(SL)
Lecturer (Probationary)
Eng. N Udhayakumar BSc Eng (Peradeniya), AMIE(SL)
Engineering Teaching Assistant – Gr I
25
Department of Textile and Apparel Technology
Dr.Dipl.-Ing. GB Delkumburewatta Dipl.-Ing. (Dresden), MPhil (OUSL), PhD (Manchester), CText (UK), ATI(UK)
Senior Lecturer – Gr I Head of the Department
Prof. Dr.-Ing.WA Wimalaweera Dipl.-Ing. (Dresden), Dr.-Ing. (Stuttgart), CText (UK), FTI (UK)
Professor in Textile and Apparel Technology
Eng. Prof. SA Ariadurai BE (Osmania), PGDipTech (Moratuwa), PhD (UMIST), CText (UK), ATI (UK), MIE (India), CEng
Professor in Textile and Apparel Technology
Dr. P Ovitigala PGDip (Leeds), PhD (Leeds), CText (UK), ATI (UK)
Senior Lecturer – Gr I
Dipl.-Ing. GYAR Jayananda Dipl.-Ing. (Dresden), MBA (SJP), MA (Colombo), PGDipWritership & Communication (SJP), CText (UK), ATI (UK)
Senior Lecturer – Gr I
Eng. Dr. - Ing. MER Perera BSc Eng (Hons) (Moratuwa), MSc Eng (Dresden), Dr. Ing. (Dresden)
Senior Lecturer – Gr II
Eng. Dr. CN Hearth BSc Eng (Hons) (Moratuwa), MScEng (Dresden), PhD (Incheon)
Senior Lecturer – Gr II
Mr. LSA Perera BSc (Colombo), MA (IGNOU), MSc. (Moratuwa)
Lecturer
Eng. (Mrs.) TPGNT Alwis BSc Eng (Hons) (Moratuwa), PG Dip Eng (Moratuwa)
Lecturer
Eng. (Mrs.) DN Ginige BSc Eng (Hons) (Moratuwa)
Lecturer
Mrs. DS Wijerathna BDes (Hons)(Moratuwa)
Lecturer (Probationary)
26
Course Information
27
Foundation Courses for Technology
The Faculty of Engineering Technology offers courses at the Foundation level to enable students without adequate academic qualifications to enter the Certificate, Advanced Certificate and Diploma programmes, and through that, all degree and higher degree programmes. The foundation Level courses are offered in Sinhala, Tamil, and English. A person seeking admission to the programme leading to the Award of Credit Certificate for
each individual course in the Foundation for Technology shall be required to have completed eighteen years of age on the date of closing of applications for the Foundation courses. After the successful completion of these courses students are eligible to obtain credit certificates for each of the courses thus concluded. The courses that are offered at the Foundation level are given in Table 01:
Table 01
Level Course Code and Title Prerequisites
0 FEJ0010 Learning to learn at a distance None
2
MPZ2310 Pure mathematics MPZ1310(EL) or Credit Pass in Mathematics at GCE (O/L)
MPZ2311 Applied mathematics MPZ1310(EL) or Credit Pass in Mathematics at GCE (O/L)
CEX2312 Engineering properties of materials None
TTX2313 Physics for technology None
Other Optional Courses available at the Foundation levels are:
Level Course Code and Title Prerequisites
0 LSL0203 English for technology (Beginners) None
1 MPZ1310 Basic mathematics None
2 FEK2130 Word for windows None
FEK2132 Excel for windows None
English requirement for the programmes offered by the Faculty:
Even though English is not compulsory, students may need to satisfy English requirement to register for the courses at diploma and degree levels in both technology and industrial study programmes. This English requirement is met by completing English courses (LSL0203, LSL3201) offered by the University or by having exemption (VRL3200, VRL1201). The expected English requirements are listed in the Table 01 a: Table 01 a
Courses English requirement
For all the courses at level 3 unless specified LSL0203(CR) or VRL1201or VRL3200
For all the courses at level 4 unless specified LSL3201(EL) or VRL1201 or VRL3200
For all the course at level 5 and 6 unless specified LSL3201(P) or VRL1201 or VRL3200
CR - Concurrent Registration, EL– Eligibility, P- Pass
28
Advanced Certificate in Technology
The Advanced Certificate in Technology programme of the Faculty is a programme introduced about six years ago. This qualification is expected to open an avenue for entry-level technical grades within the Engineering profession. The entry qualification for the programme is 36 credits from foundation courses in technology or have passed all subjects in GCE (A/L) – Mathematics stream. The minimum duration of the programme is two years. The medium of instruction is English. For the award of the Advanced Certificate in Technology, it is possible for a student to select any combination of courses meeting the requirements given in Table 02. However, particular combinations of compulsory courses, given in Table 03 will entitle the student to the Advanced Certificate with a specialisation in one of the following areas:
Civil Engineering
Electrical and Electronic Engineering
Mechanical Engineering
Mechatronics Engineering
Textile Engineering The Faculty expects a student who has been awarded the Advanced Certificate in Technology to be:
Able to appreciate the existence and significance of well-known principles in engineering technology and,
Self-motivated and capable of furthering career advancement.
The courses selected for the award of the Advanced Certificate in Technology shall be so as to meet the minimum requirements in each category as shown below in Table 02. If the credits gained in any category exceed the maximum limit shown, only such maximum shall be used in computing the total credits. The credits gained in foundation level courses cannot be counted towards the award of the certificate. The complete list of courses, with Prerequisites, is given in the pages 10 - 16.
Table 02
Category Letter
denoting category
Minimum credits Maximum credits
Engineering X 45 54
Engineering projects Y 0 6
Mathematics Z 6 15
General J 0 6
Management M 0 6
Other (Industrial/Academic)
I 0 6
Training W 12 18
English L 0 6
Computer literacy K 0 6
Total 72
29
List of compulsory courses required for specialisation in a particular field in Advanced Certificate in Technology
Table 03
Areas of Specialisation
Level Civil
Engineering Electrical and
Electronic Engineering
Mechanical Engineering
Mechatronics Engineering
Textile Engineering
3
MPZ3231 ECX3210 MEX3211 MEX3212 CEX3230 CEX3231 CEX3233 CEX3234
MEW3101 MEW3102 CEW3290
MPZ3231 ECX3210 MEX3211 MEX3212 ECX3230 ECX3231 ECX3232 ECX3233
MEW3101 MEW3102 ECW3290
MPZ3231 ECX3210 MEX3211 MEX3212 MEX3271 MEX3233 MEX3234 MEX3235 ECX3234
MEW3101 MEW3102 MEW3292
MPZ3231 ECX3210 MEX3211 MEX3212 MEX3235 MEX3271 MEX3272 MEX3273 MEX3174 MEW3101 MEW3102 MEW3294
MPZ3231 ECX3210 MEX3211 MEX3212 TTX3231 TTX3232 TTX3255
MEW3101 MEW3102 Any one of
TTW3290/1/2
4 TTX4232
30
Diploma in Technology
The Diploma in Technology programme of the OUSL (along with the NDT, NDES and the HNDE programmes offered by other institutions) is one of the main avenues to enter middle-level technical grades within the Engineering profession. The entry qualification for the programme is 36 credits from foundation courses in technology or have passed all subjects in GCE (A/L) – Mathematics stream. The minimum duration of the Diploma programme is three years and the medium of instruction is English. For the award of the Diploma in Technology, it is possible for a student to select any combination of courses meeting the requirements given in Table 04. However, particular combinations of compulsory courses given in Table 05 will entitle the students to the Diploma, with specialisation in one of the following areas:
Civil Engineering
Computer Engineering
Electrical Engineering
Electronic and Communication Engineering
Mechanical Engineering
Mechatronics Engineering
Textile Engineering The Faculty expects a student who has been awarded the Diploma in Technology to be:
Competent in the application of the well-known principles of engineering technology,
Aware of social, environmental and economic issues related to technology, and
Self-motivated and capable of furthering career advancement.
The courses selected for the award of the Diploma in Technology shall be so as to meet the minimum requirements in each category as shown below in Table 04. If the credits gained in any category exceed the maximum limit shown, only such maximum shall be used in computing the total credits. The credits gained in foundation level courses cannot be counted towards the award of the Diploma. The complete list of courses, with Prerequisites, is given in the pages 33 - 37.
Table 04
Category Letter
denoting category
Minimum credits Maximum credits
Engineering X
69 of which at least 18
credits are at level 4 or above.
90 of which at least 18
credits are at level 4 or above.
Engineering projects Y 0 6
Mathematics Z 9 18
General J 0 6
Management M 0 6
Other (Industrial/Academic) I 0 6
Training W 18 18
English L 0 6
Computer literacy K 0 6
Total 115
of which at least 18 credits are at level 4 or above
31
List of compulsory courses required for specialisation in a particular field in Diploma in Technology
Table 05
Areas of Specialisation
Le
ve
l
Civil Engineering
Computer Engineering
Electrical Engineering
Electronic and
Communication Engineering
Mechanical Engineering
Mechatronics Engineering
Textile Engineering
3
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 CEX3230 CEX3231 CEX3232 CEX3233 CEX3234
MEW3101 MEW3102 CEW3290
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 ECX3230 ECX3231 ECX3232 ECX3233
MEW3101 MEW3102 ECW3290
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 ECX3230 ECX3231 ECX3232 ECX3233
MEW3101 MEW3102 ECW3290
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 ECX3230 ECX3231 ECX3232 ECX3233
MEW3101 MEW3102 ECW3290
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 MEX3271 MEX3233 MEX3234 MEX3235 ECX3234
MEW3101 MEW3102 MEW3292
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 MEX3235 MEX3271 MEX3272 MEX3273 MEX3174 MEK3170 MEW3101 MEW3102 MEW3294
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 TTX3231 TTX3232 TTX3255 MEX3235 MEX3271 MEW3101 MEW3102 Any one of
TTW3290/1/2
4
CEX4230 CEX4231 CEX4232 CEW4290
ECX4235 ECX4236 ECX4237 ECW4291
or ECW5291
ECX4232 ECX4234 ECX4236 ECX4238 ECW4292
or ECW5292
ECX4230 ECX4233 ECX4236 ECW4293
or ECW5293
MEX4231 MEX4233 ECX4236
MEW4292 Minimum of
two from MEX4230 MEX4235 MEX4232 MEX4242
MEX4243 MEX4271 MEX4272 MEX4273 ECX4236
MEW4294
TTX4232 TTX4233
32
Bachelor of Technology (Engineering)
The Bachelor of Technology (Engineering) is designed carefully specifying, minimum and maximum limits for each category of courses, to ensure that the programme is balanced, and that it meets the requirements of major Engineering Institutions, both in Sri Lanka and overseas (e.g. Institution of Engineers, Sri Lanka). The normal entry to the programme is through the Diploma in Technology, but entry is also possible for those with equivalent qualifications. The minimum duration of the Degree programme, including the Diploma is five years and the medium of instruction is English. For the award of B Tech (Eng) Degree it is possible for a student to select any combination of courses meeting the requirements given in Table 06. Particular combinations of compulsory courses, as given in Table 07 will entitle the students to the Degree in the following specialised areas:
Civil Engineering
Computer Engineering
Electrical Engineering
Electronic and Communication Engineering
Mechanical Engineering
Mechatronics Engineering
Textile Engineering The Faculty expects a student who has been awarded the Bachelor of Technology (Engineering) degree to be able to:
Develop creative and analytical ability and innovative thinking in Engineering
Address social, environmental and economic issues related to Engineering
Access and utilize Engineering knowledge to the benefit of the society.
The courses selected shall be so as to meet the minimum requirements in each category as shown in Table 06. If the credits gained in any category exceed the maximum limit shown, only such maximum shall be used in computing the total credits. The credits gained in foundation level courses cannot be counted towards the award of the degree. The complete list of courses, with Prerequisites, is given in the pages 33 - 37.
Table 06
Category
Letter denoting category
Minimum credits Maximum credits
Engineering X
120 subject to a minimum of 45 credits being at levels 5 and 6, of which at
least 18 credits are at level 6.
138 subject to a minimum of 45 credits being at levels 5 and 6, of which at
least 18 credits are at level 6.
Engineering projects Y 12
subject to a minimum of 12 credits being at level 6.
24 subject to a minimum of 12 credits
being at level 6.
Mathematics Z 21
subject to a minimum of 6 credits being at levels 5 and 6.
39 subject to a minimum of 6 credits
being at levels 5 and 6.
General J 9 18
Management M 9 18
Other (Industrial / Academic)
I 0 6
Training W 18 18
English L 0 6
Computer literacy K 0 6
Total 205
subject to a minimum of 90 credits being at levels 5 and 6.
33
List of compulsory courses required for specialisation in a particular field in Bachelor of Technology (Engineering)
Table 07
Areas of Specialisation
Le
ve
l
Civil Engineering
Computer Engineering
Electrical Engineering
Electronic and Communication
Engineering
Mechanical Engineering
Mechatronics Engineering
Textile Engineering
3
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 CEX3230 CEX3231 CEX3232 CEX3233 CEX3234
MEW3101 MEW3102 CEW3290
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 ECX3230 ECX3231 ECX3232 ECX3233
MEW3101 MEW3102 ECW3290
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 ECX3230 ECX3231 ECX3232 ECX3233
MEW3101 MEW3102 ECW3290
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 ECX3230 ECX3231 ECX3232 ECX3233
MEW3101 MEW3102 ECW3290
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 MEX3271 MEX3233 MEX3234 MEX3235 ECX3234
MEW3101 MEW3102 MEW3292
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 MEX3235 MEX3271 MEX3272 MEX3273 MEX3174 MEK3170 MEW3101 MEW3102 MEW3294
MPZ3231 MPZ3132 ECX3210 MEX3211 MEX3212 TTX3231 TTX3232 TTX3255 MEX3235 MEX3271 MEW3101 MEW3102 Any one of
TTW3290/1/2
4
MPZ4230 CEX4230 CEX4231 CEX4232 CEW4290
MPZ4230 MPZ4140 ECX4235 ECX4236 ECX4237 ECW4291
or ECW5291
MPZ4230 ECX4232 ECX4234 ECX4236 ECX4238 MEX4243 ECW4292
or ECW5292
MPZ4230 ECX4230 ECX4233 ECX4236 MEX4243 ECW4293
or ECW5293
MPZ4230 MEX4231 MEX4233 ECX4236
MEW4292 Minimum of
two from MEX4230 MEX4235 MEX4232 MEX4242
MPZ4230 MEX4243 MEX4271 MEX4272 MEX4273 ECX4236
MEW4294
MPZ4230 TTX4232 TTX4233 MEX4243
5
MPZ5230 CEX5230 CEX5231 CEX5232 CEX5233
MPZ5230 MPZ5140 ECX5234 ECX5235 ECX5236 ECX5237
MPZ5230 ECX5231 ECX5332 ECX5238
MPZ5230 ECX5233 ECX5234 ECX5239
MPZ5230 MEX5230 MEX5231 MEX5232 MEX5233
MPZ5230 MEX5270 MEX5271 MEX5272 MEX5233
MPZ5230 TTX5131 TTX5232 TTX5234 TTX5237
6
CEX6230 CEX6331 CEX6332 CEX6233
CEY6595 or CEY6496 or (CEY6197 &
CEY6498)
ECX6235 ECX6236
ECY6595 or ECY6496 or (ECY6197 &
ECY6498)
ECX6330 ECX6332 ECX6241
ECY6595 or ECY6496 or (ECY6197 &
ECY6498)
ECX6330 ECX6333 ECX6241
ECY6595 or ECY6496 or (ECY6197 &
ECY6498)
MEX6340 MEY6595 or MEY6496 or (MEY6197 &
MEY6498) Minimum of
two from MEX6331 MEX6332 MEX6330 MEX6334
MEX6270 MEX6271 MEX6272 ECX6242 MEY6573
or MEY6474
TTX6231 TTX6233 TTI6135
TTY6595 or TTY6496 or (TTY6197 &
TTY6498)
34
Complete List of Courses for Technology (Engineering)
Please note that the course combination given for Advanced Certificate in Technology, Diploma in Technology and Bachelor of Technology (Engineering), are lists of compulsory courses only (tables 03, 05 and 07). In order to satisfy the requirement for the award of the relevant qualification, students would be required to offer additional courses. The complete list of courses that are offered in these programmes with respective prerequisites and core
requisites is given below. Students after offering the compulsory courses for the relevant programme should select additional courses from this list. While selecting the additional courses, students must ensure that the conditions regarding credit, level and category requirements for the award of the Advanced Certificate/Diploma/Degree are met. Further, it should be noted that the students can claim consideration for only one course in each of the following combinations:
ECX3230 and ECX3234 ECX3231 and ECX3234 ECX3232 and ECX3234 AEX4237 and CEX4233 MEX4234 and TTX5234 TTM4239 and MEM5336 TTX5136 and TTX6239 MEX5230 and CEX5231 CEX5231 and AEX6233
ECX3230 and MEX3272 ECX3231 and MEX3272 ECX3232 and MEX3272 ECX3234 and MEX3272 MEX4230 and MEX4236 ECX4242 and MEX4243 MEX4234 and TTX5234 MEX6270 and MEX6333
CR - Concurrent Registration, EL– Eligibility, P- Pass For the English prerequisites refer Table 01 a (page 26). All new students must offer FEJ0010 at the first year of registration For reregistering students FEJ0010(P) or 12 credits (pass) in X category (excluding exemptions) is applicable for all the courses, except for the courses for which the pre-requisite of LSL0203(CR) is required.
Courses Offered at Level 0
Category Course Code and Title Prerequisites
L * LSL0203 English for technology (Beginner‟s) None
J * FEJ0010 Learning to learn at a distance None
* Please note that credits cannot be claimed for these courses
Courses Offered at Level 1 Category Course Code and Title Prerequisites
Z * MPZ1310 Basic mathematics None
* Please note that credits cannot be claimed for this course
Courses Offered at Level 2 Category Course Code and Title Prerequisites
Z
MPZ2310 Pure mathematics MPZ1310(EL) or Credit Pass in Mathematics in GCE (O/L)
MPZ2311 Applied mathematics MPZ1310(EL) or Credit Pass in Mathematics in GCE (O/L)
X CEX2312 Engineering properties of materials None
TTX2313 Physics for technology None
K FEK2130 Word for windows None
FEK2132 Excel for windows None
Courses Offered at Level 3 Category Course Code and Title Prerequisites
X
AEX3230 Crop production and farming systems
AEX3231 Soil management, tillage and traction
AEX3232 Plant and soil science
AEX3233 Post harvest technology I
CEX3230 Construction materials
CEX3231 Structural analysis and design I MEX3211(EL), CEX3230(EL), CEX3234(CR),LSL3201(CR) or VRL3200 or VRL1201,
CEX3232 Hydraulics and hydrology LSL3201(CR) or VRL3200 or VRL1201, MEX3212(EL), MPZ3231(EL)
CEX3233 Surveying I LSL3201(CR) or VRL3200 or VRL1201, MEX3211(EL)
35
Courses Offered at Level 3 Category Course Code and Title Prerequisites
CEX3234 Strength of materials MPZ3231(CR)
ECX3210 Electro-techniques MPZ3231(CR)
ECX3230 Electronics LSL3201(CR) or VRL3200 or VRL1201, ECX3210(EL), MPZ3231(EL), MEX3211(EL)
ECX3231 Electrical circuits and measurements LSL3201(CR) or VRL3200 or VRL1201, ECX3210(EL), MPZ3231(EL), MEX3211(EL)
ECX3232 Electrical power LSL3201(CR) or VRL3200 or VRL1201, ECX3210(EL), MPZ3231(EL), MEX3211(EL)
ECX3233 Communications and information technology
LSL3201(CR) or MEX3211(EL) or VRL3200 or VRL1201, ECX3210(CR),
ECX3234 Electrical technology LSL3201(CR) or VRL3200 or VRL1201, ECX3210(EL), MPZ3231(EL), MEX3211(EL)
MEX3211 Communicating engineering information
MEX3212 Basic thermo-fluids
MEX3233 Workshop technology* MEW3102(CR)
MEX3234 Engineering drawing LSL3201(CR) or VRL3200 or VRL1201, MEX3211(EL)
MEX3235 Thermo-fluids LSL3201(CR) or VRL3200 or VRL1201, MEX3212 (EL)
MEX3271 Applied mechanics and strength of materials
LSL3201(CR) or VRL3200 or VRL1201, MPZ3231 (EL)
MEX3272 Applied electronics LSL3201(CR) or VRL3200 or VRL1201, ECX3210(EL), MPZ3231(EL)
MEX3273 Modelling of mechatronics systems LSL3201(CR) or VRL3200 or VRL1201, MEX3271(CR), MEX3272(CR)
MEX3174 Principles of design
TTX3231 Fibre science and technology
TTX3232 Yarn manufacture I
TTX3255 Woven fabric technology
I TTI3235 Apparel production
TTI3236 Fabric structure and analysis
Z MPZ3231 Engineering mathematics I A
MPZ3132 Engineering mathematics I B LSL3201(CR) or VRL3200 or VRL1201, MPZ3231(EL)
K MEK3170 C programming
MEK3289 Computer aided drafting MEX3211(EL)
J LWJ3160 Introduction to laws of Sri Lanka
L LSL3201 English for technology I LSL0203(EL)
W
MEW3101 Basic training I MEX3211(CR), ECX3210(CR)
MEW3102 Basic training II MEW3101(CR)
AEW3290 Specific training I (Agricultural engineering)
MEW3101(P), MEW3102(P), Eligibility in 36 credits in X category, including AEX3230, AEX3231 and AEX3233
CEW3290 Specific training I (Civil) CEX3230(P), CEX3231(P), CEX3233(P), MEW3101(P), MEW3102(P)
ECW3290 Specific training I (Electronics) MEW3101(P), MEW3102(P), ECX3210(P), {ECX3230(P) or [ECX3231(P) and ECX3230(EL)]}
MEW3292 Specific training I (Mechanical) MEW3101(P) MEW3102 (P), ECX3210 (P), MEX3211(P), MEX3233(P)
MEW3294 Specific training I (Mechatronics) MEW3101(P), MEW3102(P), MEX3174 (P), ECX3210 (P), MEX3211(P), MEX3273(CR)
TTW3290 Specific training (Yarn manufacture) TTX3232(P) or [TTX3232(EL) and pass in further 18 credits]
TTW3291 Specific training (Weaving) TTX3255(P) or [TTX3255(EL) and pass in further 18 credits]
TTW3292 Specific training (Chemical processing) TTX4232(EL) and pass in further 18 credits
* Students registering for MEX3233 – Workshop technology should get through Basic training I & II before participating in lab classes.
# If not mentioned otherwise, prerequisites for all courses at level 3 is LSL0203 (CR) or VRL1201 or VRL3200
Courses Offered at Level 4 Category Course Code and Title Prerequisites
X
AEX4230 Integrated crop protection AEX3230(CR)
AEX4231 Food and nutrition AEX3230(CR)
AEX4232 Soil & water conservation AEX3232(CR)
AEX4237 Irrigation and drainage engineering AEX3232(EL)
CEX4230 Soil mechanics and introduction to rock mechanics
CEX3232(EL), CEX3234(EL)
CEX4231 Structural analysis and design II MPZ3231(P), MEX3211(P), CEX3230(P), CEX3231(EL), CEX3234(EL)
CEX4232 Construction engineering and planning CEX3230(P), MEX3211(P), MPZ3231(P)
CEX4233 Irrigation engineering CEX3232(EL)
CEX4234 Water supply and sewerage engineering CEX3232(EL)
36
Courses Offered at Level 4 Category Course Code and Title Prerequisites
CEX4235 Building engineering MEX3211(P), CEX3230(P)
CEX4236 Highway engineering CEX3230(P)
ECX4230 Fault diagnosis in electronic circuits ECX3210(P), ECX3230(EL), ECX3231(EL), MEX3211(P), MPZ3231(P), MPZ3132(EL)
ECX4232 Power systems I ECX3210(P), MPZ3231(P), ECX3232(EL), MPZ3132(EL), MEX3211(P)
ECX4233 Communications ECX3210(P), MPZ3231(P), ECX3233(EL), MPZ3132(CR), MEX3211(P)
ECX4234 Electrical installations ECX3210(P), MEX3211(P), ECX3232(CR)
ECX4235 Data structures and algorithms ECX3233(CR), MPZ3231(EL), MPZ4140(CR) MEX3211(P)
ECX4236 Microprocessors and interfacing ECX3210(P), MPZ3231(P), MEX3211(P), [(ECX3233(EL) and ECX3230(EL)) or ECX3234(EL) or MEX3272(EL)]
ECX4237 Software engineering I ECX3233(EL), MEX3211(P), MPZ3231(EL), ECX4235(CR)
ECX4238 Electrical machines ECX3210(P), MPZ3231(P), ECX3232(EL), MPZ3132(EL), MEX3211(P)
ECX4262 Object oriented design and programming ECX3233(EL), ECX4237(CR)
MEX4230 Production technology MEX3233(P)
MEX4231 Elementary machine design MEX3234(EL), MEX3271(EL),
MEX4232 Automobile technology MEX3235(EL), MEX3271(EL)
MEX4233 Materials engineering MEX3271(EL)
MEX4235 Production management MEX3233 (P),MPZ3231(P)
MEX4242 Automotive electronics MEX4232(CR), ECX3234(EL)
MEX4243 Controls systems engineering MEX3211(P), MPZ4230(CR) & pass in further 27 credits
MEX4271 Sensors and actuators MPZ3231 (P), MEX3271(EL), MEX3272 (EL)
MEX4272 Vibration and faults diagnosis MPZ3231(P), MPZ3132(EL), MEX3271(EL),MEX3272(EL)
MEX4273 Mechatronics product design MEX3273(EL), MEX3174(P), MEX4271(CR)
TTX4231 Knitting and non-woven technology LSL3201(CR) or VRL3200 or VRL1201
TTX4232 Textile colouration LSL3201(CR) or VRL3200 or VRL1201
TTX4233 Quality assurance for textiles and clothing LSL3201(CR) or VRL3200 or VRL1201
TTX4235 Yarn manufacture II LSL3201(CR) or VRL3200, or VRL1201, TTX3232(EL)
TTX4255 Advanced woven fabric technology LSL3201(CR) or VRL3200, or VRL1201,TTX3255(EL)
J AEJ4233 Rural sociology
MPJ4131History of technology Pass in 36 credits
M
AEM4234 Agricultural economics and management
AEM4235 Agricultural marketing
TTM4239 Management studies LSL3201(CR) or VRL3200 or VRL1201
L LSL4201 English for technology II
W
AEW4290 Specific training II (Agricultural engineering)
MEW3101(P), MEW3102(P), AEW3290(CR)
CEW4290 Specific training II (Civil) CEW3290(CR)
ECW4291 Specific training II (Software) ECW3290(CR), [ECX4237(P) or [ECX4235(P) and ECX4237(CR)]]
ECW4292 Specific training II (Power) ECW3290(CR), ECX3232(EL), ECX4232(CR), ECX4238(CR)
ECW4293 Specific training II (Communication) ECX3233(EL), ECX4233(CR), ECW3290(CR)
MEW4292 Specific training II (Mechanical) MEW3292(CR), MEX3271(P), ECX3234(P)
MEW4294 Specific training II (Mechatronics) MEW3294(CR), MEX3271(P), MEX3272(P), MEX4273(CR),
Z MPZ4230 Engineering mathematics II MPZ3231(P), MPZ3132(EL)
MPZ4140 Discrete mathematics I
# If not mentioned otherwise, prerequisites for all courses at level 4 is LSL3201 (EL) or VRL1201 or VRL3200
Courses Offered at Level 5 Category Course Code and Title Prerequisites
X
AEX5230 Power and machinery in agriculture AEX3231(P)
AEX5231 Post harvest technology II AEX3233(P)
AEX5232 Soil, plant and water relationship AEX3232(P)
CEX5230 Surveying II MEX3211(P),CEX3233(P), MPZ3231(P) and pass in further 18 credits at Level 4 or above
CEX5231 Mechanics of fluids CEX3232(P), MPZ5230(CR)
CEX5232 Engineering geology CEX3230(P), CEX4230(CR)
CEX5233 Structural analysis CEX4231(EL)
ECX5231 Network theory MPZ3132(P), MPZ3231(P) ECX3231(P), MEX3211(P), MPZ4230(EL)
ECX5332 Power systems II MPZ3231(P), MPZ3132(P) ECX3232(P), MEX3211(P), ECX4232(EL), ECX4238(CR)
37
Courses Offered at Level 5 Category Course Code and Title Prerequisites
ECX5233 Radio and line communication ECX3233(P), MPZ3132(P), MPZ3231(P), MEX3211(P), ECX4233(EL), MPZ4230(P)
ECX5234 Data communications ECX3233(P), MPZ3231(P), MPZ3132(P), MEX3211(P)
ECX5235 Operating systems ECX3233(P), MEX3211(P), MPZ4140(EL), MPZ5140(CR), ECX4235(EL), MPZ4230(EL)
ECX5236 Computer architecture ECX3233(P), MPZ3231(P), MPZ3132(P), MEX3211(P), ECX4236(EL)
ECX5237 Software engineering II ECX3233(P), MEX3211(P), ECX4237(EL), ECX4235(EL)
ECX5238 High voltage engineering & electrical machines
ECX3232(P), MPZ3231(P), MPZ3132(P), MEX3211(P), ECX4238(EL), ECX4232(EL)
ECX5239 Physical electronics ECX3230(P), MPZ3231(P), MPZ3132(P), MEX3211(P), MPZ4230(EL)
ECX5240 Information systems ECX3233(P), MEX3211(P), ECX4237(EL), ECX4235(EL), MPZ4140(EL)
ECX5241 Distributed parameter systems MPZ3231(P), MPZ3132(P), MEX3211(P), MPZ4230(P), MPZ5230(CR)
ECX5267 Software testing and quality assurance ECX4237(EL),
MEX5230 Fluid mechanics MEX3235(P), MPZ4230(EL)
MEX5231 Applied thermodynamics MEX3235(P), MPZ4230(EL)
MEX5232 Strength of materials II MEX3271(P), MPZ4230(EL)
MEX5233 Dynamics of mechanical systems MEX3271(P), MPZ4230(EL)
MEX5270 Power electronic & motor drives MEX3272(P), MEX4271(EL)
MEX5271 Machine vision MEX4271(EL), MPZ4230(EL)
MEX5272 Materials & manufacturing technology MEW3102(P), MEX3271(EL)
TTX5131 Structure and properties of fibres TTX3231(P)
TTX5232 Yarn and fabric mechanics MPZ3231 (EL), TTX3232(P), TTX3255(P)
TTX5234 Plant utilities
TTX5237 Speciality fabrics TTX3255(P), TTI3236(P), TTX4231(EL)
I TTI5139 Current topics in clothing and textiles Pass in 18 credits and Eligible in additional 18 credits at Level 4 or above
J
AEJ5240 Indigenous knowledge of herbal products Pass in 18 credits at Level 3 & further 18 credits eligibility at Level 4 or above
MPJ5231 The nature of science Pass in 63 credits
MPJ5233 Technology, society and environment Pass in 63 credits
M MEM5336 Management for engineers Pass in 72 credits
W
ECW5291 Specific training II (Software-undergraduate)
ECW3290(CR), [ECX4237(P) or ECX4262(P)], ECX4235(P), ECX5237(CR) *
ECW5292 Specific training II (Power-undergraduate)
ECW3290(CR), MEX4243(EL), ECX4232(EL), ECX4238(EL), ECX5332(CR)*
ECW5293 Specific training II (Communication-undergraduate)
ECW3290(CR), MEX4243(EL), ECX5233(CR), ECX5234(CR),*
Z MPZ5230 Engineering mathematics III MPZ3132(P), MPZ4230(EL),
MPZ5140 Discrete mathematics II MPZ4140(EL),
K MEK5201 Computer aided drafting and modelling MEX3211(EL)
# If not mentioned otherwise, prerequisites for all courses at level 5 is LSL3201(P) or VRL1201 or VRL3200
Courses Offered at Level 6 Category Course Code and Title Prerequisites
X
AEX6230 Environment control in agricultural structures
AEX3230(P), MEX3212(P)
AEX6231 Processing of food products MEX3212(P), AEX4231(P)
AEX6233 Hydrology CEX3232(P)
CEX6230 Geotechnics CEX4230(P), CEX5232(CR)
CEX6331 Construction engineering and management
CEX4231(P), CEX4232(P)
CEX6332 Structural design CEX3231(P), CEX4231(P), CEX5233(EL)
CEX6233 Environmental engineering CEX3232(P), CEX4230(EL), CEX4232(EL)
CEX6239 Construction management CEX4232(P)
ECX6330 Electronic systems ECX3230(P), MPZ3132(P), MPZ3231(P), MEX3211(P),[ECX4236(EL) or ECX4230(EL)]
ECX6332 Power systems planning ECX4232(P), MEX4243(CR), ECX5332(EL)
ECX6333 Microwave engineering & applications MPZ4230(P), MPZ5230(EL),ECX4233(P), ECX6241(EL)
ECX6234 Digital signal processing MPZ5230(P), MPZ4140(P),[MPZ5140(EL) or MEX4243(P)]
ECX6235 Compiler design ECX4235(P), ECX5235(EL), ECX5236(EL), MPZ4140(P), MPZ5140(EL)
38
Courses Offered at Level 6 Category Course Code and Title Prerequisites
ECX6236 Processor design ECX3233(P), ECX4236(P), ECX5236(EL)
ECX6240 Knowledge engineering [ECX4237(P) or MEK3170(P)], MPZ4140(P), MPZ5140(EL)
ECX6241 Field theory MPZ4230(P), MPZ5230(CR)
ECX6242 Modern control systems MEX4243(P), MPZ5230(EL)
MEX6330 Mechanics of materials MEX5232(EL), MPZ4230(P)
MEX6331 Automobile engineering MEX4232(P), MPZ4230(P)
MEX6332 Vehicle dynamics and design of automotive components
MEX4232(P), MEX5232(EL), MPZ4230(P),
MEX6334 Advanced manufacturing technology MEX4230(P), MPZ4230(P)
MEX6335 Thermal power generation MEX3235(P), MPZ4230(P)
MEX6340 Industrial engineering MEX3233(P), MPZ4230(P)
MEX6270 Factory automation Pass in 72 Credits
MEX6271 Robotics MEX4271(P), MEX4243(P), MPZ5230(EL), MEX5233(EL)
MEX6272 Intelligent control ECX6242(CR)
TTX6231 Advanced colouration technology TTX4232(P) or [TTX3234(P) and TTX4234(P)]
TTX6233 Technical textiles Eligibility in 36 credits at Level 4 or above
TTX6135 Textile product engineering Eligibility in 36 credits at Level 4 or above
TTX6239 Ergonomics Eligibility in 36 credits at Level 4 or above
Y
AEY6595 Individual project - Type B (Agricultural Engineering)
Pass in 18 credits at Level 5 or above and Eligible in additional 18 credit at Level 5 or above
CEY6595 Individual project - Type B (Civil) Pass in 18 credits at Level 5 or above in X category and Eligible in additional 18 credits at Level 5 or above
ECY6595 Individual project – Type B (Computer, Electrical, Electronic and Communication)
Pass in 18 credits at Level 5 or above from X category and Eligible in additional 18 credits at Level 5 or above
MEY6595 Individual project - Type B (Mechanical) Pass in 18 credits of X courses at level 5 or above
TTY6595 Individual project - Type B (Textile and Apparel)
TTI5139 (EL), Pass in 18 credits at Level 5 or above and Eligible in additional 18 credits in Level 5 or above
AEY6496 Group project (Agricultural Engineering) Pass in 18 credits at Level 5 or above and Eligible in additional 18 credits at Level 5 or above
CEY6496 Group project (Civil) Pass in 18 credits at Level 5 or above in X category and Eligible in additional 18 credits at Level 5 or above
ECY6496 Group project (Computer, Electrical, Electronic and Communication)
Pass in 18 credits at Level 5 or above from X category and Eligible in additional 18 credits at Level 5 or above
MEY6496 Group project (Mechanical) Pass in 18 credits of X courses at level 5 or above
TTY6496 Group project (Textile and Apparel) Pass in 18 credits at Level 5 or above and Eligible in additional 18 credits at Level 5 or above
AEY6197 Project identification and literature survey (Agricultural Engineering)
Pass in 9 credits at Level 5 or above
CEY6197 Project identification and literature survey (Civil)
Pass in 9 credits at Level 5 or above in X category
ECY6197 Project identification and literature survey (Computer, Electrical, Electronic and Communication)
Pass in 9 credits at Level 5 or above from X category
MEY6197 Project identification and literature survey (Mechanical)
Pass in 9 credits at Level 5 or above
TTY6197 Project identification and literature survey (Textile and Apparel)
Pass in 9 credits at Level 5 or above
AEY6498 Individual project - Type A (Agricultural Engineering)
AEY6197(P)
CEY6498 Individual project - Type A (Civil) CEY6197(P), Pass in 18 credits at Level 5 or above in X category and Eligible in additional 18 credits at Level 5 or above
ECY6498 Individual project – Type A (Computer, Electrical, Electronic and Communication)
ECY6197(P), pass in 18 credits at Level 5 or above from X category and Eligible additional 18 credits at Level 5 or above
MEY6498 Individual project - Type A (Mechanical) MEY6197(P)
TTY6498 Individual project - Type A (Textile and Apparel)
TTY6197(P)
MEY6573 Mechatronic product design project (Individual)
MEX4273(P) and Pass in 18 credits at Level 5 or above and eligible in additional 18 credits at Level 5 or above
MEY6474 Mechatronic product design Project (Group)
MEX4273(P) and Pass in 18 credits at Level 5 or above and eligible in additional 18 credits at Level 5 or above
ECY6194 Special Project ECU4399(P)
* If not mentioned otherwise, prerequisites for all courses at level 6 is LSL3201(P) or VRL1201 or VRL3200
39
Course Exemptions – Technology Programmes
Exemptions are generally granted for courses. However, for certain qualifications credits at certain levels and categories of courses are also granted (known as virtual credits). This is denoted by a code beginning with letters „VR‟.
Exemptions applicable for Foundation Courses for Technology (Engineering) programme
No. Qualification Foundation courses
MPZ2310 MPZ2311 CEX2312 TTX2313 VRX2300
1 GCE(A/L) Sri Lanka – Combined mathematics
X X
2 GCE(A/L) Sri Lanka – Pure mathematics
X
3 GCE(A/L) Sri Lanka – Applied mathematics
X
4 GCE (A/L) Sri Lanka – Physics
X
5 GCE (A/L) Sri Lanka – Physics & Chemistry
X X
6 MPZ1330 – OUSL OR MPZ2230 – OUSL
X
7 MPZ1331 – OUSL
X
8 CEX1330 – OUSL
X X
9 MAF1301 & MAF2301- OUSL
X
10 MAF1302 & MAF2302 – OUSL
X
11 PSF1302, PSF2302, PSF1303 & PSF2303 – OUSL
X X
12 PSF1302 & PSF2302 – OUSL
X
13 NCT (Civil) / NCT (Mechanical) /NCT (Electrical and Electronics)
X
14 NCIT (Electrical and Electronics)/NCIT (Civil)
X X
15 Diploma in Civil engineering, GITI
X X
16 City and Guilds Advanced Technician Diploma
X X
17 Diploma in Electronics and Communications-Jaffna College Institute of Technology
X X X X
18 BIT (University of Colombo)
X X
19 NDT/NDES/HNDE/NDET any specialization
X X X X
20 BSc degree in engineering/ Physics/Defence studies /Surveying
X X X X
21 CEI/EC Part I
X X X X
Note: In order to be eligible for admission to the Technology (Engineering) Programme, Diploma Level courses equivalent to a minimum of thirty six credits should be completed or exempted.
Equivalent courses for the courses pre-2008 curriculum Course pre-2008 curriculum Exempted granted VRL1200 VRL3200
ECX2330 ECX3210
40
ECX6233 ECX 6333+VRX6F00
MEX2301 MEX3212
MEX2230 MEX3234
MPZ2230+MPZ3230 MPZ3231+MPZ3132
MPZ6231 MPZ4140+MPZ5140+VRZ6200+VRZ4F00+VRZ5F00
Exemptions applicable to Technology (Engineering) Programme of study Qualifications in English Language
Qualification Courses exempted
GCE(A/L) – Simple pass in General English , OR Any recognized qualification in Science or Technology/Engineering, at the level of Diploma or Degree, the medium of instruction being English (verification needed)
VRL1201
Qualifications in Agriculture/Biology/Food and related disciplines
Qualification Courses exempted
Diploma in Agriculture –School of Agriculture OR Diploma in Agriculture – Aquinas College
AEX3230, AEX3231, AEX3232, AEX3233, AEX4230, AEW3290
NDT (Agriculture) OR, NDA OR HNDA – Department of Technical Education and Training
AEX3230, AEX3231, AEX3232, AEX3233, AEX4230, AEW3290, AEM4235
Diploma in Technology (OUSL) – agricultural engineering (any specialisation)
MEX3211, MEX3212, ECX3210, AEX3230, AEX3231, AEX3232, AEX3233, AEX4230, AEX4231, AEX4237, MEW3101, MEW3102, AEW3290, AEW4290, VRX3400, VRM4200, VRJ4100
Diploma in Animal Husbandry, Sri Lanka, School of Animal Husbandry, Department of Animal Production and Health, Welisara
VRI3200
Note: Those who have satisfied only the academic requirements without industrial training components in NDT (Agriculture) can be granted exemptions as listed, without Specific training courses at Levels 3 & 4
Qualifications in Civil engineering and related disciplines
Qualification Courses exempted
NCT (Civil) CEX3230
NCIT (Civil) CEX3230, CEX3231, MEW3101, MEW3102
NAB (Civil) MEX3211, MEX3212, ECX3210, MEW3101, MEW3102
Diploma in Civil Engineering, GITI CEX3230, CEX3232, CEX3233
HNDE (Civil ) MEX3211, CEX3230, CEX3231, CEX3232, CEX3233, CEX3234, MEW3101, MEW3102, CEW3290, CEW4290
NDET (Civil) MEX3211, CEX3230, CEX3231, CEX3232, CEX3233, CEX3234, MPZ3231, MPZ3132, MEW3101, MEW3102, CEW3290, CEW4290, VRX3200
NDT (Civil) or NDES (Civil) ECX3210, MEX3211, MEX3212, CEX3230, CEX3231, CEX3232, CEX3233, CEX3234, MPZ3231, MPZ3132, MEW3101, MEW3102, CEW3290, CEW4290, VRX3200
B.Sc. (Civil Eng.), General Sir John Kothalawala Defence Academy
ECX3210, MEX3211, MEX3212, CEX3230, CEX3231, CEX3232, CEX3233, CEX3234, CEX4230, CEX4231, CEX4332, CEX4234, CEX4236, CEX5230, MEW3101, MEW3102
B.Sc.(Surveying Science) Institute of Surveying & mapping, Diyatalawa
MPZ3231, MPZ3132, ECX3210, CEX3233,CEX5230
Note: Those who have satisfied only the academic requirements without industrial training components in NDT (Civil) and NDET (Civil) can be granted exemptions as listed, without Specific training courses at Levels 3 & 4
Qualifications in Electrical/Electronic/Communications/ Computer Engineering/ IT and related disciplines
Qualification Courses exempted
NCT (Electrical and Electronics) ECX3210
NCIT (Electrical and Electronics) ECX3210, ECX3230 or MEX3272, ECX3231, ECX3232, ECX3233, MEW3101, MEW3102
41
Qualification Courses exempted
NAB Special Apprentice (AIT) –Electrical/Electronic ECX3210, ECX3230 or MEX3272, MEW3101, MEW3102, ECW3290
Diploma in Electronics and Communications, Jaffna College Institute of Technology
MEX3211, ECX3210, ECX3230 or MEX3272, ECX3231, ECX3232, ECX3233
Diploma in Computer System Design, (NIBM) ECX3233, ECX4235,ECX4237, ECX4262
Higher Diploma in Computer based Information Systems (NIBM) AND Diploma in Computer System Design (NIBM)
ECX3233, ECX4235, ECX4237,ECX5240, ECX5237
NDT (Electrical) or NDES (Power) or HNDE (Electrical Power)
ECX3210, MEX3211, MEX3212, MEX3174, ECX3230 or MEX3272, ECX3231, ECX3232, ECX4232, ECX4238, MPZ3231, MPZ3132, MEW3101, MEW3102, ECW3290 or MEW3294, ECW4292, VRX3200
NDES* (Power) (New curriculum) NDT** (Electrical) (New curriculum)
ECX3210, MEX3211, MEX3212, MEX3174, ECX3230 or MEX3272, ECX3231, ECX3232, ECX3233, ECX4232, ECX4234, ECX4236, ECX4238, MPZ3231, MPZ3132, MEW3101, MEW3102, ECW3290 or MEW3294, ECW4292
NDT (Electronic & telecom.) or NDES (Electronics) or NDES (Telecommunication)
ECX3210, MEX3211, MEX3212, MEX3174, ECX3230 or MEX3272, ECX3231, ECX3232, ECX3233, ECX4233, ECX4236, MPZ3231, MPZ3132, MEW3101, MEW3102, ECW3290 or MEW3294 , ECW4293
NDES* (Electronics) or NDES *(Telecommunication) (New curriculum)
ECX3210, MEX3211, MEX3212, MEX3174, ECX3230 or MEX3272, ECX3231, ECX3232, ECX3233, ECX4230, ECX4233, ECX4236, MPZ3231, MPZ3132, MEW3101, MEW3102, ECW3290 or MEW3294, ECW4293, VRX4200
HNDE (Electronics)
ECX3210, MEX3211, MEX3212, ECX3230 or MEX3272, ECX3231, ECX3233, ECX4233, MPZ3231, MPZ3132, MEW3101, MEW3102, ECW3290 or MEW3294, ECW4293, VRX3200, VRX4200
National Diploma in Engineering Technology (NDET)- Electrical/Electronic
MEX3210, MEX3211, ECX3210, MPZ3231, ECX3230, ECX3233, MEW3101, MEW3102, VRX3200
BIT (University of Colombo) MPZ4140, ECX4235, ECX4237, ECX4262
CEI/EC Part I (Additional Exemptions for optional subjects) See below for exemptions for subjects
507 Electrical and Electronic Engineering ECX3230
507+ 508 Software and Information systems Engineering ECX3230, ECX3233
CEI/ EC Part II a (Exemptions for individual subjects) See below for exemptions for subjects
441 Field and Circuits ECX3231
443 Electrical Power Systems ECX4232
645 Communication Systems Engineering ECX4233
646 Computer Systems Engineering ECX4236, ECX5236
665 Controls Systems Engineering MEX4243, VRX5200
507+ 443 ECX3232, ECX4232, ECX3230
507+443+442 (Electrical machines and drives) ECX3232, ECX4232, ECX3230, ECX4238
*Effective year 2003 onwards **Effective year 2008 onwards Note: Those who have satisfied only the academic requirements without industrial training components in NDT (Electrical), NDT (Electronic & telecom.), HNDE (Electrical Power) and HNDE (Electronics) can be granted exemptions as listed, but without relevant Specific training courses at Levels 3 and 4
Qualifications in Mechanical/Automobile/Manufacturing/Marine/Aeronautical/Nautical/Chemical engineering and related disciplines
Qualification Courses exempted
German Training School- Full Certificate or Full Certificate of Basic Training Programme
MEW3101, MEW3102
42
Qualification Courses exempted
conducted by the Training Schools of Central Transport Board (Werahara/Borella)
National Certificate for Industrial Technicians (NCIT) (Mechanical)
MEX3211, MEX3212, MEX3233, MEX3234, MEW3101, MEW3102
NDT (Mechanical) MEX3211, MEX3212, ECX3210, MEX3271, MEX3233, MEX3234, MEX3235, ECX3234, MEX4231, MEX4230, MEX4232, MPZ3231, MPZ3132, MEW3101, MEW3102, MEW3292 or MEW3294, MEW4292
NDT (Chemical) MEX3211, MEX3212, ECX3210, MEX3271, MEX3233, MEX3234, MEX3235, ECX3234, MPZ3231, MPZ3132, MEW3101, MEW3102
NDT (Marine) MEX3211, MEX3212, ECX3210, MEX3233, MEX3234, MEX3235, MEX3271, ECX3234, , MPZ3231, MPZ3132, MEW3101, MEW3102
NDT (Nautical studies & technology) MEX3211, MEX3212, MEX3271, ECX3210, MEW3101, MEW3102
NDES (Mechanical - General) MEX3211, MEX3212, ECX3210, MEX3271, MEX3233, MEX3234, MEX3235, ECX3234, MEX4231, MEX4230, MPZ3231, MPZ3132, MEW3101, MEW3102, MEW3292 or MEW3294, MEW4292
HNDE ( Mechanical ) MEX3211, MEX3212, ECX3210, MEX3271, MEX3233, MEX3234, MEX3235, ECX3234 MEX4231, MPZ3231, MPZ3132, MEW3101, MEW3102, MEW3292 or MEW3294, MEW4292, [MEX4230 or MEX4232 ]
NDES (Automobile) MEX3211, MEX3212, ECX3210, MEX3271, MEX3233, MEX3234, MEX3235, ECX3234, MEX4231, MEX4232, MPZ3231, MPZ3132, MEW3101, MEW3102, MEW3292 or MEW3294, MEW4292
NDES (Marine) MEX3211, MEX3212, ECX3210, MEX3271, MEX3233, MEX3234, MEX3235, ECX3234, MEX4231, MPZ3231, MPZ3132, MEW3101, MEW3102
B.Sc. (Defence studies) in Aeronautical Engineering
ECX3210, MEX3211, MEX3212, ECX3230 or MEX3272, MPZ3231, MPZ3132, MEW3101, MEW3102
Note: Those who have satisfied only the academic requirements without industrial training components in NDT (Mechanical) and HNDE (Mechanical-General) could be granted exemptions as listed above, but without the relevant Specific training courses at Levels 3 and 4
Qualifications in Textile/Apparel technology and related disciplines
Qualification Courses exempted
Certificate in Textile Technology (One year Fulltime), Textile Training & Services Centre, Ratmalana
TTX3231, TTX3232, TTX3255, TTX4231, TTX4232, VRM4100
Certificate in Textile Technology (One year Fulltime) and Diploma in Technology (Extension Course), Textile Training & Services Centre, Ratmalana
TTX3231, TTX3232, TTX3255, TTI3235, TX4231, TTX4232, VRM4100
Certificate in Textile Dyeing and Printing (Part time) from the Textile Training and Services Centre, Ratmalana.
TTX4232
Diploma in Textile Technology from the Textile Training and Services Centre, Ratmalana.
TTX3231,TTX3232,TTX3255, TTI3235, TTX4231,TTX4232, VRM4100
Certificate in Textile Colouration and Finishing (Part time) and Diploma in Textile Colouration and Finishing (Part time) from the Textile Training and Services Centre, Ratmalana.
TTX4232, TTX6231, TTX3231, VRM4100
Certificate in Garment Production Management (Part time) from Clothing Industry Training Institute, Ratmalana.
TTI3235
College Diploma in Clothing Technology and Management (Fulltime), Brandix College of Clothing Technology, Ratmalana
TTI3236, TTX4231, TTX4233, TTM4239
NDT (Textile) (Old Curriculum) MEX3211, MEX3212, ECX3210, TTX3231, TTX3232, TTX3255, (TTI3235 or TTI3236), TTX4231, TTX4232, TTX4233, TTX4235, MPZ3231, MPZ3132, TTM4239, MEW3101, MEW3102, Any two of TTW3290, TTW3291, and TTW3292, MEX3174
NDT (Clothing) (Old Curriculum) MEX3211, MEX3212, MEX3174, ECX3210, TTX3231, (TTI3235 or TTI3236), TTX4231, TTX4232, TTX4233, MPZ3231, MPZ3132, TTM4239, MEW3101, MEW3102, Any two of TTW3290, TTW3291, and
43
Qualification Courses exempted
TTW3292
NDT(Textile and Clothing Technology) – New Curriculum MEX3211, MEX3212, ECX3210, MPZ3231, MPZ3132, TTX3231, TTX3232, TTX3255, TTI3235, TTI3236, MEX3271, TTX4231, TTX4232, TTX4233, TTX4235, TTM4239, MEW3101, MEW3102, Any two of TTW3290, TTW3291, and TTW3292
NDT (Polymer Technology) MEX3211, MEX3212, MEX3174, ECX3210, MPZ3231, MPZ3132, MEW3101, MEW3102
Diploma in Clothing Manufacture – CITI OR Diploma in Polymer Technology – CITI
TTX4233, VRM4100, VRI3200
BSc (Eng) Textile and Clothing, University of Moratuwa MEX3211, MEX3212, ECX3210, TTX3231, TTX3232, TTX3255, TTX4231,TTX4232, TTX4233, TTX4235, TTI3236, MPZ3231, MPZ3132, MPZ4230, MPZ5230, TTM4239, MEM5336, VRJ6100, MEW3101, MEW3102, Any two of TTW3290, TTW3291, and TTW3292
Licentiateship of Textile Institute (LTI) Examination /Associate ship of Textile Institutes (ATI) Technology Group Examination
See below for exemptions for individual papers
Paper 2 in LTI/Paper 2(a) in ATI – Fibre Technology and Textile Science
TTX3231
Paper 3 in LTI /Paper 2 (b) in ATI – Yarn Technology and Yarn preparation
TTX3232
Paper 4 in LTI /Paper 2 (c) in ATI- Fabric technology TTX3255,TTI3236,TTX4231
Paper 5 in LTI /Paper 2 (d) in ATI-Dyeing and Finishing Technology TTX4232
Paper 6 in LTI – Textile Testing TTX4233
Paper 8 in LTI /Paper 2 (f) in ATI- Management Studies VRM4200
Paper 10 in LTI- Merchandising of Textile Consumer Products VRM4100
Paper 11 in LTI – Garment Technology TTI3235
Note: Those who have satisfied only the academic requirements without industrial training components in NDT(Textile and Clothing Technology) – New Curriculum, NDT (Textile) (Old Curriculum), and NDT( Clothing), (Old Curriculum) can be granted exemptions as listed, but without relevant Specific training courses at Levels 3 and 4
44
Other qualifications
Qualification Courses exempted
BSc Eng (Peradeniya / Moratuwa) IESL or EC (London) – Full Certificate
MPZ3231, MPZ3132, MPZ4230, MPZ5230, MEM5336, VRJ6100 Levels 3 and 4 compulsory courses in the relevant field. [If the student wishes to register for a specialisation different to his BSc specialisation he has to register for 18 credits of courses from Levels 3 and 4 as recommended by the head of Department]
BSc with Physics at the final year ECX3210, MEX3212, ECX3230, ECX3231, ECX5239, ECX5241
*BSc with Mathematics at the final year *BSc Special in Physics *BSc with Applied mathematics and Pure mathematics *BSc Special in Pure or Applied Mathematics
MPZ3231, MPZ3132, MPZ4230
*BSc with Pure mathematics or Applied mathematics as a subject
MPZ3231, MPZ3132
*BSc Eng (Peradeniya / Moratuwa) – Part I *IESL or EC (London) – Part I
MPZ3231, MPZ3132
OUSL Faculty of Natural Science –Pass in CSU3276 MPZ4140, MPZ5140
Engineering Council Examination – Part2B 300 – The Engineer in Society
MPJ5233
* Only exemptions from mathematic courses are listed. If you seek further exemptions a request should be made
with relevant documents in a prescribed form, which is available at the end of this prospectus. Also this form is
obtainable from the faculty office of the Faculty of Engineering Technology.
Abbreviations
No. Abbreviation Full Text
1 GCE (A/L) General Certificate in Education (Advanced Level)
2 NDT National Diploma in Technology
3 NDES National Diploma in Engineering Science
4 NDA National Diploma in Agriculture
5 HNDA Higher National Diploma in Agriculture
6 NCT National Certificate in Technology
7 NCIT National Certificate for Industrial Technicians
8 NAB National Apprenticeship Board
9 HNDE Higher National Diploma in Engineering
10 NDET National Diploma in Engineering Technology
11 BIT Bachelor of Information Technology
12 GITI Galgamuwa Irrigation Training Institute
13 NIBM National Institute of Business Management
14 IESL Institution of Engineers Sri Lanka
15 EC Engineering Council, UK
16 CEI Council of Engineering Institutions, UK
45
Certificate in Industrial Studies
These programmes are designed to provide an opportunity to those engaged in the relevant industry to gain an in-depth knowledge on the subject of specialisation. No formal educational qualifications are required for admission to the Certificate programmes. The minimum duration of the Certificate programme is one year and the media of instruction are Sinhala and English. The OUSL awards the Certificate in Industrial Studies to students who have acquired 36 credits satisfying the requirements given in Table 08. Those who possess appropriate qualifications may seek exemptions from relevant courses of the programme. Students who are employed and working in an environment that would satisfy the training requirements of the Faculty
and those who have previous training could seek exemption from the specific training modules. Presently, Certificate in Industrial Studies is available in the following streams:
Apparel Technology
Textile Technology*
Animal Husbandry & Aquaculture (only at
Puttalam Study Centre)
* This stream is available only in English medium.
The compulsory course requirements for specialisation in a particular field is given in Table 09, while complete list of courses, with Prerequisites, offered is given in the pages 29 - 32.
Table 08
Category
Letter denoting category
Minimum credits Maximum credits
Engineering X
24 36
Industrial/Academic I
Projects Y 0 9
Mathematics Z 0 9
General J 0 9
Management M 0 9
Training/Practice W 0 12
English L 0 6
Computer literacy K 0 3
Total 36
46
List of compulsory courses required for specialisation in a particular field in Certificate in Industrial Studies
Table 09
Areas of Specializations
Level Apparel Technology Textile Technology* Animal husbandry and Aquaculture**
2 TTI2230 TTI2634
AEI2330 AEI2131 AEI2232 AEI2333 AEI2135 and AEI2234 or AEI2235
3 TTW3293
TTX3231 TTX3232 TTX3255 TTW3295
4 - TTX4231
* offered only in English medium.
** offered only at Puttalam Study Centre and only in Sinhala and Tamil Media.
47
Diploma in Industrial Studies
The Diploma in Industrial Studies of the OUSL is ideal for persons presently employed in various middle level management/technical grades in various industries. However, persons who wish to find employment in the industry may also follow this programme. Students who have passed any* GCE (A/L) subject would be given 18 credits of academic exemption at Level 1, subject to a maximum of 54 credits. Students who have obtained 36 credits in Level 1, either through completion of courses or exemptions, could directly enter the Diploma programme. Students who do not have any formal educational qualifications may enter the programme through the courses offered in Levels 1 and 2 or through the Certificate programme in the relevant discipline. The minimum duration of the Diploma programme is two years and the medium of instruction is English. However, courses at Levels 1 and 2 are offered in Sinhala, Tamil, and English media. The courses selected for the award of the Diploma in Industrial Studies shall be so as to meet the minimum requirements in each
category as shown in Table 10. If the credits gained in any category exceed the maximum limit shown, only such maximum shall be used in computing the total credits. Particular combinations of compulsory courses, as given in Table 11, will entitle the students to the Diploma in the following specialised areas:
Agriculture
Apparel Production and Management
Fashion Design &Product Development**
Textile Manufacture Those who possess appropriate qualifications may seek exemptions from relevant courses of the programme. Persons who are employed in a relevant industry and working in an environment that would satisfy the training requirements of the Faculty may seek exemption from the specific training modules. * Students who wish to follow the Agriculture specialisation should have minimum of three passes from the General Certificate in Education (Advanced Level) Examination, Sri Lanka from among the subjects, Biology (or Botany & Zoology), Chemistry, Physics, Agriculture and Combined Mathematics (or Pure Mathematics & Applied Mathematics) including the subject Biology or Botany.
** Depending on the No. of Applications, a limited No. of
Applicants will be selected after a screening process.
Table 10
Category
Letter denoting category
Minimum credits Maximum credits
Engineering X 54
at level 3 or above, of which at least 18 credits at level 4 or
above.
72 at level 3 or above, of which at
least 18 credits at level 4 or above. Industrial/Academic I
Projects Y 0 24
Mathematics Z 6 24
General J 0 24
Management M 0 24
Training/Practice W 6 24
English L 0 6
Computer literacy K 0 6
Total 90
of which at least 18 credits is at level 4 or above
48
List of compulsory courses required for specialisation in a particular field in Diploma in Industrial Studies
Table 11
Areas of Specializations
Level Agriculture
Apparel
Production & Management
Fashion Design &
Product
Development
Textile Manufacture
3
AEX3230 AEX3232 AEI3234 AEI3235 AEI3236
AEW3291 PSU1182/PSZ3182
AEZ3238
TTX3237 TTI3238 TTI3239 TTI3240 TTI3241
TTW3293
TTX3237
TTI3238
TTI3239
TTI3240
TTI3142
TTI3243
TTJ3146
TTW3294
TTX3231 TTX3232 TTX3255 TTX3234 TTI3235 TTI3236
Any two of TTW3290/1/2/3
4 AEX4230
TTX4233 TTI4238
TTM4239 TTZ4241 TTW4293
TTI4238
TTI4245
TTJ4247
TTX4231 TTX4233 TTX4234 TTM4239 TTZ4241
49
Bachelor of Industrial Studies
The Bachelor of Industrial Studies programme of the OUSL is designed specifically for persons presently employed in middle level management /technical grades in various industries. The entry to the programme is through the Diploma in Industrial Studies programme. However, entry through other paths is also possible. The Bachelor of Industrial Studies would be awarded to students who have acquired credits satisfying the conditions given in Table 12. These credits may include credits acquired for the Diploma in Industrials Studies. The minimum duration of the Degree programme, including the Diploma is four years and the medium of instruction is English. Particular combinations of compulsory courses given in Table 13, will entitle the students to the Degree in the following specialised areas:
Agriculture*
Apparel Production and Management
Fashion Design & Product Development
Textile Manufacture Those who possess appropriate qualifications may seek exemptions from relevant courses of the programme. Persons who are employed in a relevant industry and working in an environment that would satisfy the training requirements of the Faculty may seek exemption from the specific training modules. The courses selected for the award of the Bachelor of Industrial Studies shall be so as to meet the minimum requirements in each category as shown below. If the credits gained in any category exceed the maximum limit shown, only such maximum shall be used in computing the total credits. ---------------------------------------------------------- *The applicants for the Agriculture specialisation should have a
minimum of 108 credits from among the courses which goes towards satisfying the award of the Diploma in Industrial Studies (Agriculture).
Table 12
Category
Letter denoting category
Minimum credits Maximum credits
Engineering X 90 Subject to a minimum of 36
credits at levels 5 and 6.
114 Subject to a minimum of 36
credits at levels 5 and 6. Industrial/Academic I
Projects Y 12
Subject to a minimum of 12 credits at level 6.
36 Subject to a minimum of 12
credits at level 6.
Mathematics Z 12 36
General J 9 24
Management M 9 30
Training/Practice W 6 24
English L 0 6
Computer literacy K 0 6
Total 160
Subject to a minimum of 72 credits at levels 5 and 6, of which at least 18 credits at level 6
50
List of compulsory courses required for specialisation in a particular field in Bachelor of Industrial Studies
Table 13
Areas of Specializations
Level Agriculture
Apparel Production & Management
Fashion Design & Product
Development
Textile
Manufacture
Industrial
Management*
3
AEX3230 AEX3232 AEI3234 AEI3235 AEI3236
AEW3291 PSU1182/PSZ3182
AEZ3238
TTX3237 TTI3238 TTI3239 TTI3240 TTI3241
TTW3293
TTX3237
TTI3238
TTI3239
TTI3240
TTI3142
TTI3243
TTJ3146
TTW3294
TTX3231 TTX3232 TTX3255 TTX3234 TTI3235 TTI3236
Any two of TTW3290/1/2/3
4 AEX4230 PSU2182/PSZ4130
TTX4233 TTI4238
TTM4239 TTZ4241 TTW4293
TTI4238
TTI4245
TTJ4247
TTX4231 TTX4233 TTX4234 TTM4239 TTZ4241
MEX4240 MEX4241
5 AEI5243 AEI5244 AEX5232
TTX5234 TTX5235 TTI5139
TTI5238 TTI5148 TTI5154 TTJ5142
TTM5240 TTY5253
TTX5131 TTX5234 TTX5237 TTI5139
MEM5251 MEM5252 MEX5255 MEX5257
6 AEI6234 AEI6235 AEY6596
TTX6239 TTY6595 or TTY6496 or
TTY6197 and TTY6498
TTX6135 TTI6159
TTM6240 TTY6190 TTY6491
TTX6231 TTX6233 TTX6239
TTY6595 or TTY6496 or
TTY6197 and TTY6498
MEI6350 MEY6499
* This specialization is not offered from the academic year 2011/12 until further noticed.
51
Complete List of Courses for Industrial Studies
Please note that the curricula for Certificate in Industrial Studies, Diploma in Industrial Studies and Bachelor of Industrial Studies are the lists of compulsory courses. In order to satisfy the requirement for the award of the relevant qualification, students would be required to offer additional courses. The complete list of courses with Prerequisites that are offered in these programmes is given below. Students after offering the compulsory courses for the relevant programme should select additional courses from this list. While selecting the additional courses, students must ensure that the conditions regarding credit, level and category requirements for the award of the Advanced Certificate/Diploma/Degree are met. Further, it should be noted that the students may claim consideration for only one course in each of the following combinations:
TTM4239 and MEM5336 TTI3235 and TTI3238 TTI3235 and TTI3240 TTI3235 and TTI4238 TTX5136 and TTX6239
TTX3234 and TTX4232 TTX4234 and TTX4232 TTX3255 and TTX5235 TTX4231 and TTX5235 AEI6235 and AEX6233
For the English prerequisites refer Table 01 a All new registering students for any program of study are offered for FEJ0010 at the first year of registration
CR - Concurrent Registration, EL– Eligibility, P- Pass
Courses Offered at Level 0
Category Course Code and Title Prerequisites
L * LSL0203 English for technology (Beginner‟s) None
J * FEJ0201 Learning to learn at a distance None
Courses Offered at Level 1 Category Course Code and Title Prerequisites
Z TTZ1235 Mathematics & Science for textile and apparel None
*MPZ1310 Basic mathematics None
Please note that credits cannot be claimed for this course
Courses Offered at Level 2 Category Course Code and Title Prerequisites
Z
MPZ2310 Pure mathematics MPZ1310(EL) or Credit Pass in Mathematics in GCE (O/L)
MPZ2311 Applied mathematics MPZ1310(EL) or Credit Pass in Mathematics in GCE (O/L)
X CEX2312 Engineering properties of materials None
TTX2313 Physics for technology None
K FEK2130 Word for windows None
FEK2132 Excel for windows None
I
TTI2230 Introducing textiles None
TTI2634 Apparel technology None
AEI2330 Fundamentals of Biology None
AEI2131 Methods of Increasing Productivity of Farm Animals None
AEI2232 Animal Husbandry None
AEI2333 Fish and Shellfish Farming None
AEI2135 Farm Practice None
AEI2234 Integrated Farming Systems None
AEI2235 Processing & Preserving of Farm Products None
Courses Offered at Level 3 Category Course Code and Title Prerequisites
X
AEX3230 Crop production and farming systems
AEX3231 Soil management, tillage and traction
AEX3232 Plant and soil science
AEX3233 Post harvest technology I
TTX3231 Fibre science and technology
TTX3232 Yarn manufacture I
TTX3255 Woven fabric technology
TTX3234 Textile preparation
TTX3237 Fibre to fabrics
I AEI 3234 Agricultural biology I PSF1305(P), PSF2305 (P)
52
Courses Offered at Level 3 Category Course Code and Title Prerequisites
AEI3235 Land and soil tillage management
AEI3236 Post-harvest biology and technology I AEI3234(CR)
TTI3235 Apparel production
TTI3236 Fabric structure and analysis
TTI3238 Garment accessories
TTI3239 Garment analysis and sewing machinery
TTI3240 Pattern construction
TTI3241 Production planning and organisation
TTI3142 Concepts of fashion
TTI3243 Concepts of fashion design
Z
MPZ3231 Engineering mathematics I A
MPZ3132 Engineering mathematics I B LSL3201(CR) or VRL3200 or VRL1201, MPZ3231(EL)
AEZ3238 Mathematics for agriculture
PSU1182/PSZ3182 Biostatistics
J LWJ3160 Introduction to laws of Sri Lanka LSL0203(P) or VRL3200 or VRL1201
TTJ3146 Fashion illustration I
L LSL3201 English for technology I LSL0203(EL)
W
AEW3291 Specific training I (Agriculture) Pass in 18 credits at Level 3
TTW3290 Specific training (Yarn manufacture) TTX3232(P) or [TTX3232(EL) and further 18 credits]*
TTW3291 Specific training (Weaving) TTX3255(P) or [TTX3255(EL) and further 18 credits]*
TTW3292 Specific training (Chemical processing) TTX4232(EL) and further 18 credits*
TTW3293 Specific training (Apparel I) TTI3235(P) or [TTI3239(P) and TTI3241(P)] or {[TTI3235(EL)] or [TTI3239(EL) and TTI3241(EL)] and further 18 credits}*
TTW3294 Specific training (Fashion design) TTI3142 (EL) and TTI 3243 (EL)
TTW3295 Specific training (Textile Technology) TTX3232(EL), TTX3255 (EL)*
*No English requirement
* If not mentioned otherwise, prerequisites for all courses at level 3 is LSL0203 (CR) or VRL1201 or VRL3200
Courses Offered at Level 4 Category Course Code and Title Prerequisites
X
AEX4230 Integrated crop protection AEX3230(CR)
AEX4231 Food and nutrition AEX3230(CR)
AEX4232 Soil & water conservation AEX3232(CR)
AEX4237 Irrigation and drainage engineering AEX3232(EL)
MEX4240 Operations management Diploma in Technology (OUSL) or equivalent, Diploma in Industrial Studies (OUSL)*
MEX4241 Operational decision making Diploma in Technology (OUSL) or equivalent, Diploma in Industrial Studies (OUSL)*
TTX4231 Knitting and non-woven technology LSL3201(CR) or VRL3200 or VRL1201
TTX4232 Textile colouration LSL3201(CR) or VRL3200 or VRL1201
TTX4233 Quality assurance for textiles and clothing LSL3201(CR) or VRL3200 or VRL1201
TTX4234 Textile colouration and finishing LSL3201(CR) or VRL3200, or VRL1201,TTX3234(EL)
TTX4235 Yarn manufacture II LSL3201(CR) or VRL3200, or VRL1201,TTX3232(EL)
TTX4242 Knitted garment technology LSL3201(CR) or VRL3200 or VRL1201
TTX4255 Advanced woven fabric technology LSL3201(CR) or VRL3200, or VRL1201,TTX3255(EL)
I
AEI4238 Agricultural biology II PSF1306(P), PSF2306(P)
TTI4238 Garment manufacture LSL3201(CR) or VRL3200, or VRL1201,TTI3239(EL), TTI3241(EL) or TTI 3239 (EL) and TTW 3294 (EL)
TTI4245 Process of fashion design LSL3201(CR) or VRL3200 or VRL1201,TTI3243(EL)
J
AEJ4233 Rural sociology
MPJ4131History of technology Pass in 36 credits
TTJ4247 Fashion illustration II LSL3201(CR) or VRL3200 or VRL1201,TTJ3146(EL)
L LSL4201 English for technology II LSL3201(EL)
M
AEM4234 Agricultural economics and management
AEM4235 Agricultural marketing
TTM4239 Management studies LSL3201(CR) or VRL3200 or VRL1201
W TTW4293 Specific training (Apparel II) TTW3293(CR), TTI4238(EL) and further 18 credits eligibility at level 4 or above.
Z
MPZ4230 Engineering mathematics II MPZ3231(P), MPZ3132(EL)
TTZ4241 Statistics for industrial studies LSL3201(CR) or VRL3200 or VRL1201
PSU2182/PSZ4130 Design and analysis of experiments PSZ3182/PSU1182 (CR), LSL3201(CR) or VRL3200 or VRL1201,
* If not mentioned otherwise, prerequisites for all courses at level 4 is LSL3201(EL) or VRL1201 or VRL3200
53
Courses Offered at Level 5 Category Course Code and Title Prerequisites
X
AEX5232 Soil, plant and water relationship AEX3232(P)
MEX5255 Maintenance management and project management
Diploma in Technology (OUSL) or equivalent, Diploma in Industrial Studies (OUSL)
MEX5257 Information systems management Diploma in Technology (OUSL) or equivalent, Diploma in Industrial Studies (OUSL)
TTX5131 Structure and properties of fibres TTX3231(P)
TTX5232 Yarn and fabric mechanics MPZ3231 (EL), TTX3232(P), TTX3255(P)
TTX5234 Plant utilities
TTX5235 Fabric technology TTX3237(P) or [TTX3237(EL) and further 36 credits eligibility at level 3 or above.]
TTX5237 Speciality fabrics TTX3255(P), TTI3236(P), TTX4231(EL)
I
AEI5230 Fisheries and aquaculture AEI4238(EL)
AEI5241 Agricultural biotechnology AEI3234(P)
AEI5243 Farm power and machinery AEX3231(P) or AEI3235(P)
AEI5244 Postharvest biology and technology II AEX3233(P) or AEI3236(P)
MEI5260 Industrial energy management 18 credits (EL) from level 5 or above
TTI5238 Advanced pattern construction TTI3240(P)
TTI5243 Principles of fashion design Pass in 18 credits at Level 3 or above and Eligible in additional 18 credits at Level 4 or above
TTI5139 Current topics in clothing and textiles Pass in 18 credits and Eligible in additional 1 credit at Level 4 or above
TTI5145 Foundation garments Pass in 18 credits at Level 3 or above and Eligibility in additional 18 credits at Level 4 or above
TTI5146 Industrial garment washing and finishing Pass in 18 credits at Level 3 or above and Eligibility in additional 18 credits at Level 4 or above
TTI5148 Design through draping TTI3240(P) Pass in 18 credits at Level 3 or above and Eligibility in additional 18 credits at Level 4 or above
TTI5150 Enhancement apparels Pass in 18 credits at Level 3 or above and Eligibility in additional 18 credits at Level 4 or above
TTI5154 CAD for fashion I TTI3240(P), Pass in 18 credits at Level 3 or above and Eligibility in additional 18 credits at Level 4 or above
J
MPJ5231 The nature of science Pass in 63 credits,
MPJ5233 Technology, society and environment Pass in 63 credits,
AEJ5240 Indigenous knowledge of herbal products Pass in 18 credits at level 3 & further 18 credits eligibility at level 4 or above
MEJ5253 Industrial law
TTJ5142 History and traditions of clothing Pass in 18 credits in Level 3 or above and Eligibility in additional 18 credits at Level 4 or above
M
AEM5246 Agricultural extension Pass in 36 Credits at Level 3 or above
MEM5336 Management for engineers Pass in 36 credits at Level 3 or above
MEM5251 Industrial economics, accounting & marketing
MEM5252 Human resource management & organisational behaviour
TTM5240 Apparel merchandising TTM4239(CR)
TTM5149 Fashion show production Pass in 18 credits in Level 3 or above and Eligibility in additional 18 credits at Level 4 or above
Y TTY5253 Design project TTJ3146(P), TTJ4247(EL), Pass in 18 credits in Level 3 or above and Eligibility in additional 18 credits at Level 4 or above
Z MPZ5230 Engineering mathematics III MPZ3132(P), MPZ4230(EL),
TTZ5244 Quantitative techniques TTZ4241(EL) or PSU1182(EL)
* If not mentioned otherwise, prerequisites for all courses at level 5 is LSL 3201 (P) or VRL1201 or VRL3200
Courses Offered at Level 6 Category Course Code and Title Prerequisites
X
MEX6351 Industrial automation MEX4240(P) or MEX4241(P)
TTX6231 Advanced colouration technology TTX4232(P) or [TTX3234(P) and TTX4234(P)]
TTX6233 Technical textiles Eligibility in 36 credits at Level 4 or above
TTX6135 Textile product engineering Eligibility in 36 credits at Level 4 or above
TTX6239 Ergonomics Eligibility in 36 credits at Level 4 or above
I AEI6132 Groundwater resources management AEI6235(CR)
54
AEI6234 Environment control in farm structures AEX3230(P), AEI3234(P)
AEI6235 Hydrology and water resources AEX3232(P), PSU1182/PSZ3182(P)
AEI6236 Food processing AEX4231(P)
AEI6137 Impact of climate change on water resources AEI6235(CR)
AEI6138 Fruit crops and cut flower production AEX3230 (P), AEI3234(P)
AEI6239 Animal husbandry and production LSL3201(P) or VRL3200 or VRL1201, AEI4238(P)
MEI6350 Sustainable industrial development Diploma in Technology (OUSL) or equivalent, Diploma in Industrial Studies (OUSL)
TTI6159 CAD for fashion II TTJ3146(CR),TTI5154(CR), Eligibility in 36 credits at Level 4 or above
M TTM6240 Fashion marketing TTI3142(P),TTM5240(CR), Eligibility in 36 credits at
Level 4 or above
Y
AEY6596 Individual project (Agriculture) Pass in 18 credits at Level 5 and eligible in additional 18 credits at Level 5 or above, AEW3291(P),
PSU1182/ PSZ3182 (P), PSU2182/ PSZ4130 (P) and experience in OUSL Farm
MEY6499 Individual project (Industrial Management) 18 credits pass from level 5 or above
TTY6190 Inspiration of fashion design LSL3201(P) or VRL3200 or VRL1201, Pass in 9 credits at Level 5 or above
TTY6491 Creative fashion design TTY6190(P)
TTY6595 Individual project - Type B (Textile and Apparel) TTI5139(EL) , Pass in 18 credits at Level 5 or above and Eligible in additional 18 credits at Level 5 or above
TTY6496 Group project (Textile and Apparel) Pass in 18 credits at Level 5 or above and Eligible in additional 18 credits at Level 5 or above
TTY6197 Project identification and literature survey (Textile and Apparel)
Pass in 9 credits at Level 5 or above
TTY6498 Individual project - Type A (Textile and Apparel) TTY6197(P)
Courses with virtual credits as listed in Schedule 3 will have the course code VR_ _ _ _ _ Further, a pre-requisite of FEJ0010(P) or 12 credits (pass) in X category (excluding exemptions) is applicable for all the courses, except for the course for which the pre-requisite of LSL0203(CR) is required. * No English requirement
* If not mentioned otherwise, prerequisites for all courses at level 6 is LSL 3201 (P) or VRL1201 or VRL3200
55
Exemptions applicable only for Industrial Studies Programme
Exemptions for foundation level courses
Qualification Courses exempted
G.C.E.(A/L) Sri Lanka – Pass in any subject 18 Virtual credits for each subject and up to a maximum of three subjects [VRI1600, VRI1601, VRI1602]
Trained teachers Certificate (Agriculture) VRI2600, VRI2601
Credits obtained either from foundation courses of Faculty of Engineering Technology or/and Faculty of Natural Sciences
18 virtual credits for each credit and up to 54 credits [VRI1600, VRI1601, VRI1602] Exemptions could be claimed only once for each equivalent course
Qualifications in Agriculture/Biology/Food and related disciplines [Applicable for IS (agriculture)]
Qualification Courses exempted
Diploma in Agriculture –Schools of Agriculture or Diploma in Agriculture – Aquinas College
AEX3230, AEI3235, AEX3232, AEI3236, AEX4230, AEW3291, VRI3600
NDT (Agriculture) or National Diploma in Agriculture (NDA) or Higher National Diploma in Agriculture (HNDA)- Department of Technical Education and Training
AEX3230, AEI3235, AEX3232, AEI3236, AEX4230, AEW3291, AEM4235, VRI4400
NDT (Agriculture) [without training] Exemptions granted for NDT (Agriculture) except AEW3291
Diploma in Technology (OUSL) – agricultural engineering (any specialisation) ECX3210, AEX3230, AEI3235, AEX3232, AEI3236, AEX4230, AEX4231, AEX4237, VRW3400, VRW4200, VRX3400, VRM4200, VRJ4100
Diploma in Animal Husbandry, Sri Lanka, School of Animal Husbandry, Department of Animal Production and Health, Welisara
AEI3234, AEI4238, VRI3200
Qualifications in Textile/Apparel technology and related disciplines [Applicable for IS (Apparel Production and Management) and IS (Textile Manufacture)]
Qualification Courses exempted
Certificate in Textile Technology (One year Fulltime), Textile Training & Services Centre, Ratmalana
TTX3231, TTX3232, TTX3255, TTX3237, TTX4231, [TTX3234 and TTX4234] or TTX4232, VRM4100
Certificate in Textile Technology (One year Fulltime) and Diploma in Technology (Extension Course), Textile Training & Services Centre, Ratmalana
TTX3231, TTX3232, TTX3255, [TTX3234 and TTX4234] or TTX4232, TTI3235, TTX3237, TTX4231, VRM4100, VRL1201
Certificate in Fabric Technology (Part time) from the Textile Training and Services Centre, Ratmalana.
TTI2230 or TTX3237
Certificate in Textile Dyeing and Printing (Part time) from the Textile Training and Services Centre, Ratmalana.
[TTX3234 and TTX4234] or TTX4232
Diploma in Textile Technology from the Textile Training and Services Centre, Ratmalana.
TTX3231,TTX3232,TTX3255,TTX3234,TTI3235, TTX3237,TTX4231,TTX4234,VRM4100, VRW3200, VRL1201
Certificate in Textile Colouration and Finishing (Part time) and Diploma in Textile Colouration and Finishing (Part time) from the Textile Training and Services Centre, Ratmalana.
{TTX3234 and TTX4234} or TTX4232, TTX6231, TTX3231, VRM4100,VRL1201
Diploma in Clothing Technology, Clothing Industry Training Institute, Ratmalana
TTX3237, TTI3238, TTI3239, TTI3240, , TTI3241, TTX4233, TTW3293, TTW4293, VRM4100, VRL1201, VRI3200
Certificate in Garment Production Management (Part time) from Clothing Industry Training Institute, Ratmalana.
TTI2634 or TTI3235
College Diploma in Clothing Technology and Management (Fulltime), Brandix College of Clothing Technology, Ratmalana
TTI3236, TTX3237, TTI3238, TTI3239, TTI3240, TTI3241, TTX4231, TTX4233, TTI4238, TTM4239, TTZ4241, VRL1201,TTW3293
Certificate in Garment Industry Management, Garment Industry Management Institute
TTI2634
NDT (Textile) (Old Curriculum) TTX3231, TTX3232, TTX3255, TTX3234, TTI3235,
56
Qualification Courses exempted
TTI3236, TTX3237, TTX4231, TTX4232, TTX4233, TTX4234, TTX4235, MPZ3231, MPZ3132, TTM4239, Any two of TTW3290, TTW3291, TTW3292 and TTW3293, VRW3400
NDT (Textile) (Old Curriculum) Without completion of training TTX3231, TTX3232, TTX3255, TTX3234, TTI3235, TTI3236, TTX3237, TTX4231, TTX4232, TTX4233, TTX4234, TTX4235, MPZ3231, MPZ3132, TTM4239
NDT (Clothing) (Old Curriculum) TTX3231, TTX3234, TTI3235, TTI3236, TTX3237, TTI3238, TTI3239, TTI3240, TTI3241, TTI4238, TTX4231, TTX4232, TTX4233, TTX4234, MPZ3231, MPZ3132, TTM4239, Any two of TTW3290, TTW3291, TTW3292, TTW3293, and TTW4293
NDT( Clothing) (Old Curriculum) Without completion of training TTX3231, TTX3234, TTI3235, TTI3236, TTX3237, TTI3238, TTI3239, TTI3240, TTI3241, TTI4238, TTX4231, TTX4232, TTX4233, TTX4234, MPZ3231, MPZ3132, TTM4239
NDT(Textile and Clothing Technology) – New Curriculum
MPZ3231, MPZ3132, MEX3233, MEX3230, TTX3231, TTX3232, TTX3255, TTX3234, TTI3235, TTI3236, TTX3237, TTI3238, TTI3239, TTI3240, TTI3241, TTX4231, TTX4232, TTX4233, TTX4234, TTX4235, TTI4238, TTM4239, Any two of TTW3290, TTW3291, TTW3292, TTW3293 and TTW4293.
NDT(Textile and Clothing Technology) – New Curriculum Without completion of training
MPZ3231, MPZ3132, MEX3233, MEX3230, TTX3231, TTX3232, TTX3255, TTX3234, TTI3235, TTI3236, TTX3237, TTI3238, TTI3239, TTI3240, TTI3241, TTX4231, TTX4232, TTX4233, TTX4234, TTX4235, TTI4238, TTM4239
Diploma in Clothing Manufacture – CITI TTX3237, TTI3239, TTI3240, TTI3241, TTX4233, TTW3293, TTW4293, VRM4100, VRL1201, VRI3200
BSc (Eng) Textile and Clothing, University of Moratuwa TTX3231, TTX3232, TTX3255, TTX3234, TTX3237, TTX4231, TTX4233, TTX4234, TTX4235, TTI3236, MPZ3231, MPZ3132, MPZ4230, MPZ5230 TTM4239, MEM5336, VRJ6100, TTW3290, TTW3291
Licentiateship of Textile Institute (LTI) Examination /Associateship of Textile Institutes (ATI) Technology Group Examination
See below for exemptions for individual papers
Paper 1 in LTI /Paper 1 (e) in ATI – Textile Technology TTI2230 or TTX3237
Paper 2 in LTI/Paper 2(a) in ATI – Fibre Technology and Textile Science
TTX3231
Paper 3 in LTI /Paper 2 (b) in ATI – Yarn Technology and Yarn preparation
TTX3232
Paper 4 in LTI /Paper 2 (c) in ATI- Fabric technology TTX3255,TTI3236,TTX4231
Paper 5 in LTI /Paper 2 (d) in ATI-Dyeing and Finishing Technology [TTX3234 and TTX4234] or TTX4232
Paper 6 in LTI – Textile Testing TTX4233
Paper 8 in LTI /Paper 2 (f) in ATI- Management Studies VRM4200
Paper 9 in LTI- Quality Management in Textiles TTZ4241
Paper 10 in LTI- Merchandising of Textile Consumer Products VRM4100
Paper 11 in LTI – Garment Technology TTI2634 or TTI3235
*Certificate in Industrial Studies (OUSL) See below for exemptions for individual papers
TTZ1235 Mathematics and Science for Textiles and Apparel VRZ1200
TTI2230 Introducing Textiles VRI2200
TTI2631 Yarn manufacture TTX3232,TTX4235,VRI2200
TTI2632 Weaving TTX3255,TTI3236,VRI2200
TTI2633 Textile Chemical processing [TTX3234, TTX4234] or [TTX4232, VRI3200], VRI2200
TTI2634 Apparel Technology [TTI3235 or VRI3201], VRI 3200, VRI2200
TTI3650 Pattern Making TTI3240, VRI3400
Diploma in Technology (Textile Engineering) from the OUSL MPZ3231, MPZ3132, TTX3231, TTX3232, TTX3255, TTX3237, TTX4232, TTX4233, VRW3200
* Those who have completed the certificate under the Old Curriculum must be transferred to corresponding
courses in the new curriculum and be granted appropriate exemptions.
57
Qualifications in Diploma in any Technology area [Applicable for IS (Industrial Management)]*
Qualification Courses exempted
Diploma in Technology (OUSL)/NDT/NDES/HNDE in any specialization AND Five (05) years of post qualifying industrial experience in the relevant field
VRX3600, VRX3601, VRX3602, VRX3603, VRI3600, VRX4600, VRZ3400, VRW3200, VRW4200
* For registered students Exemptions from the courses of Faculty of Natural Sciences
Those who possess the following qualifications would be exempted from some of the courses offered by the Faculty of Natural Sciences as mentioned below. These exemptions are only applicable for the students registering for DIS/BIS (Agriculture) Programme of study and credits of these courses are not counted towards the total credits requirements for the awards
Qualification Courses exempted
G C E (A/L) Examination simple pass or better
Biology PSF1305, PSF2305, PSF1306, PSF2306 Botany PSF1305, PSF2305
Zoology PSF1306, PSF2306 Chemistry PSF1303, PSF2303
Physics PSF1302, PSF2302
Diploma in Agriculture – Schools of Agriculture PSF1305, PSF2305
Science Teacher‟s Diploma (Bioscience) PSF1305, PSF2305, PSF1306, PSF2306
Science Teacher‟s Diploma (Physical Science) PSF1302, PSF2302
National Diploma/Diploma in Teaching (Science) or Trained Teachers Certificate (Science)
PSF1302, PSF1303, PSF1305, PSF1306, PSF2302, PSF2303, PSF2305, PSF2306
Lab Technicians Certificate, Institute of Chemistry PSF1303
National Diploma (Science) or Science Teachers Diploma CHU1221
PSF1302 Physics I PSF2302 Physics II CHU1221 Basic principles of chemistry PSF1303 Chemistry I PSF2303 Chemistry II PSF1305 Botany I PSF2305 Botany II PSF1306 Zoology I PSF2306 Zoology II
58
Postgraduate Programmes
The Faculty of Engineering Technology offers Postgraduate Diploma in Technology and Master of Technology programmes in selected areas. At present, PGDipTech and MTech programmes are available in three areas of specialisation:
Construction Management
Industrial Engineering
Apparel Production and Management Courses offered in the three streams are given in pages 58 – 60. The Construction Management specialisation is designed with the aim of providing knowledge and skills required by the academically and/or professionally qualified engineers to fit into managerial roles in the construction industry, to enhance quality, efficiency and productivity of respective projects/ organizations. The Industrial Engineering specialisation is designed to suit the critical needs in modern society for an engineering approach to solving problems relating to the interplay of people, productivity, information, and management. The aim of the programme is to produce effective engineering managers who are able to drive their organisations to higher levels of achievement and thus contribute to organisational productivity through upgrading managerial talents. The Apparel Production and Management specialisation is designed, with emphasis on the apparel sector, to produce effective managers who will be competent to successfully manage and lead industrial or national organizations. Students hoping to register for the Construction Management and Industrial Engineering programmes should normally hold a degree in Engineering. However, if you are qualified and have substantial experience in the area of study, contact Eng. Dr. DAR Dolage, (0112881289) Programme Supervisor for Construction Management, at the Department of Civil Engineering or Eng. JHSK Jayamaha,
(0112881457) Programme Supervisor for Industrial Engineering at the Department of Mechanical Engineering. The applicants for these two programmes should have:
A degree of Bachelor of Technology (Engineering) in a relevant discipline, from the OUSL, or
A degree of Bachelor of Science of Engineering in a relevant discipline, from a recognised university, or
Eligibility to become an Associate Member of the IESL
In the case of Apparel Production and Management programme please contact. Dr.
Dip Ing G.B. Delkumburwatta (0112881307), Programme Supervisor at the Department of Textile and Apparel Technology for clarifications. Students who possess a Bachelors Degree in Textile and Apparel Technology or Bachelor of Industrial Studies or any other discipline are eligible to apply for the postgraduate programme in Apparel Production and Management. Those who possess professional qualifications in the field of textile and apparel technology, CIMA, CIM Apparel Merchandising (with appropriate additional credits) are eligible to seek for provisional registration. Further, for all three specialisations students should also have a minimum of two years post-qualifying and relevant experience in industry at the closing date of applications. A person who does not satisfy the requirements described above may be admitted to the program of study if such person possesses any other relevant qualifications and experience acceptable to the Senate. After evaluation of applications, successful prospective candidates will be called for an interview by the relevant Departments, where the candidates are required to produce original certificates pertaining to the identity, academic/professional qualifications, and experience. The respective Programme Supervisor will inform the time, venue and any other requirements for this interview. The programmes are available in English medium only. The minimum duration required to complete the PGDipTech programme is one year, and the MTech programme is further one year after the PGDipTech. Those who
59
successfully complete the requirements in the PGDipTech programme may proceed to the MTech programme.
(Please note that there is a special application form for Postgraduate programmes).
Postgraduate Diploma in Technology in Construction Management Following are the courses available for the Construction Management specialisation: Compulsory Courses Courses in the following table are compulsory requirements for the Postgraduate Diploma in Technology (Construction Management)
Course Code Course Title
CEX7101 Planning and control in the construction industry
CEM7102 Human resource management in the construction industry
CEM7103 Financial management and taxation in the construction industry
CEX7104 Estimating, tendering and marketing in the construction industry
CEX7105 Construction contracts and claims
CEM7106 Law and the construction industry
CEX7107 Construction productivity and quantitative techniques
CEX7108 Cost control and cash flow in the construction industry
CEX7109 Management of the design phase and quality control
CEX7112 Management information systems for the construction industry
Optional Courses In order to complete the Postgraduate Diploma, students would be required to offer a minimum of two courses from the optional courses given below:
Course Code Course Title
CEX7110 Construction project appraisal
CEX7111 Construction plant management and construction safety
CEX7113 Real estate and property development
Stand Alone Courses Applicants offering courses from the PG Diploma in Technology (Construction Management) programme, as Stand-Alone courses, need to fulfil the requirements indicated below:
Course Code Pre-requisite
CEX7101, CEX7108, CEX7111 Degree in civil/mechanical engineering or equivalent.
CEM7102,CEM7103,CEX7104,CEX7105, CEM7106,CEX7112,CEX7113
Adequate experience in construction industry.
CEX7110 Degree in civil engineering or equivalent.
Master of Technology in Construction Management Those who successfully complete all the requirements of the Postgraduate Diploma program in Construction Management may proceed to the Master of Technology programme, offering the following course under the Research Option.
The student should undertake a comprehensive research study and submit a Dissertation in order to successfully complete the Research Project of 36 Credits weightage. This should be done under close guidance of an academic supervisor assigned by the Department.
Postgraduate Diploma in Technology in Industrial Engineering Following are the courses available for the Industrial Engineering specialisation: Compulsory Courses Courses in the following table are compulsory requirements for the Postgraduate Diploma in Technology (Industrial Engineering):
Course Code Course Title
CEY7C14 Research project
60
Course Code Course Title
MEX7211 Operations research
MEM7212 Business organisation and management
MEM7213 Industrial economics and accounting
MEX7214 Quality and reliability engineering
MEX7215 Production planning and materials management
MEM7216 Human resource management
Master of Technology in Industrial Engineering Those who successfully complete all the courses in the PG Diploma program in Industrial Engineering may proceed to the Master of Technology programme, offering the following courses under the Course Option. Compulsory Courses
Course Code Course Title
MEM7117 Strategic management
MEX7118 Technology management
MEX7119 Maintenance management
MEX7120 Project management
MEY7621 Research project
LWJ7101 Law and industry
Optional Courses In order to complete the Master of Technology in Industrial Engineering, students would be required to offer minimum of one course from the optional courses given below.
Course Code Course Title
MEX7124 Cleaner production for waste management
MEX7125 Energy management in industries
CEX7105 Construction contracts and claims
CEX7111 Construction plant management and construction safety
CEX7113 Real estate and property development
Postgraduate Diploma in Technology in Apparel Production and Management Following are the courses available for the Apparel production and Management specialisation: Compulsory Courses
Courses in the following table are compulsory requirements for the Postgraduate Diploma in Technology (Apparel Production and Management):
Course Code Course Title
TTX7131 Apparel Manufacturing Technology
TTX7132 Global Outlook of Textile and Apparel Industry
TTI7133 Human Resource Management and Legal Aspects for Managing
TTM7134 Textile and Apparel Marketing
TTM7135 Managerial Accounting & Financial Management
TTI7136 Supply Chain Management
TTI7137 Production Planning
TTI7138 Quality Management
TTX7139 Product Development
TTX7140 Human Factors Engineering
TTX7141 Strategic Management
TTY7191 Research Methodology
61
Master of Technology in Apparel Production and Management Those who successfully complete all the courses in the PG Diploma program in Apparel production and management may proceed to the Master of Technology programme, either by Research Option or by Course Option. (i) Research Option:
Course Code Course Title
TTY7692 Research Project
(ii) Course Option:
Course Code Course Title
TTX7151 Operations Research
TTM7152 Project Management
TTI7153 Management Information Systems
TTY7692 Research Project
and 9 credits from
TTM7154 Managerial Economics
TTM7155 Project appraisal
MEX7118 Technology Management
MEX7124 Cleaner Production for Waste Management
MEX7125 Energy Management in Industries
LWJ7101 Law and Industry
CEX7105 Construction Contracts and Claims
62
Postgraduate Research Degrees
Research keeps a person motivated, at the forefront of the respective professional or academic career while contributing to solve problems scientifically for the benefit of the society. Supervised research leading to a higher degree is really only the beginning of a research career. Basically, it provides training in research methodology and research techniques. The Faculty provides opportunities for science and technology based research in most of the Engineering disciplines. All research students are initially required to register for a MPhil degree. Suitable students could however transfer to a PhD degree after about a year of work, on the recommendation of their supervisor(s). Students are normally expected to possess an Honours Degree or an equivalent qualification to read for a research degree. However, in exceptional circumstances, other suitably qualified candidates may also be considered for admission. Students who register for Master/Doctor of Philosophy degrees are required to submit a thesis within 2-7 years. It is expected that the work should reflect the student‟s research capability and that it should make a significant contribution to knowledge in the area of study. If you feel that you are competent and motivated to pursue higher studies for a research degree, you should contact a senior academic staff member of an academic department in which you wish to carry out your research.
Stand Alone Courses
Sometimes it may be required by some to follow a few courses for the benefit of their industrial career development. If you are looking for such courses the Faculty of Engineering Technology has a series of such courses covering many areas of study. You can register for these courses without registering for a particular programme.
You can register for a maximum of 18 credits of courses at a time and if you later decide to enter a regular programme then you may seek exemptions from the courses you have passed as Stand Alone. However, you will then have to satisfy the admission requirements for such programmes.
All the courses that are offered by the Faculty of Engineering Technology are available as Stand Alone courses. The lists of available courses are given in pages 10 to 16 and 29 to 32. Please note that the students would be required to possess the Prerequisites in respect of each of the courses or equivalent qualifications or knowledge, to register for the individual Stand Alone courses. In the case of PG Diploma in Construction Management, the Prerequisites for Stand Alone Courses are indicated in page 37. The tuition fee for each course would be three times that of the corresponding course in the regular programme.
Please also note that students registering for regular programmes cannot register for courses as Stand Alone courses.
63
How to Select Courses?
(Certificate, Diploma and Degree Programmes)
1. Choose the qualification you wish to gain (e.g. Diploma in Technology) from pages 1 – 2. Take note of the respective credit requirements in Tables 01, 02, 04, 06, 08, 10 and 12.
2. Decide on your area of specialisation and locate it in the table of compulsory
courses pertaining to your desired qualification in Tables 01, 03, 05, 07, 09, 11 and 13.
3. Identify the credits associated with different Categories at different Levels, for
the Compulsory courses. 4. Identify the balance credit requirements for different Categories at different
Levels, with reference to the appropriate credit tables. 5. Mark the Compulsory courses for your required area of specialisation in the
Complete List of Courses in pages 10 -16 (technology programmes) and 29 - 32 (industrial studies programme).
6. Select from the same list as in item 5 above, the additional courses to fulfil the
balance credit requirements for different Categories at different Levels as well as the Total credit requirement. When you are selecting these additional courses pay special attention to Prerequisites.
7. You may claim exemptions based on your existing qualifications (follow the
Faculty approved procedure) and offer courses at registration to gradually complete the courses from lower to higher Levels through the years. This must be done subject to maximum credit limits allowed per year.
64
Scheme of Assessment
Scheme of Assessment for Programmes conducted by the Faculty of Engineering Technology [Extracts from relevant Rules and Regulations applicable to the above awards]
2. Scheme of Assessment
2.1 The assessment for the course “FEJ0010-Learning to Learn at a Distance” shall consist of Continuous Assessment only. A student who obtains a minimum of 40% for the Continuous Assessment in FEJ0010 shall be awarded a Pass and shall be eligible to obtain a Certificate of Completion.
2.2 The assessment of a student in any course, other than FEJ0010, shall consist of two components, viz.: Continuous Assessment and Final Examination.
2.2.1 The content, nature and weightage of each of these components shall be in accordance with the Rules relating to the scheme and method of assessment as determined by the Faculty.
2.2.2 A student shall be eligible to appear at the Final Examination in respect of any course only if he/she has been awarded a minimum of 40% for the Continuous Assessment component in respect of that course. The eligibility thus obtained to sit for the Final Examination in respect of any course shall be valid for a period stipulated by the Senate.
2.2.3 A student who fails to obtain 40% for Continuous Assessment or fails to obtain a grade C or higher at the Final Examination before the lapse of the eligibility in respect of any course, shall be deemed to have failed that course and shall be awarded the grade FA. Such a student may repeat that course by re-registering subject to section 2.2.6.
2.2.4 The overall assessment mark (Z%) of a student in respect of any course shall be based on the Continuous Assessment mark (X%) and the mark obtained at the Final Examination (Y%) and shall be computed and grades awarded as follows:
For courses offered by the Faculty of Engineering Technology;
85 < Z :A+ 63 < Z < 70: B+ 45 < Z < 50: C+ 30 < Z < 35: D+
75 < Z < 85: A 55 < Z < 63: B 40 < Z < 45: C 20 < Z < 30: D
70 < Z < 75: A- 50 < Z < 55: B- 35 < Z < 40: C- Z < 20: E
A+, A, A-, B+, B, B-, C+, and C, constitute Pass grades.
The grades PA+, PA, PB, PC, PD, RE and RF already awarded under the previous structures shall be
converted in accordance with the conversion method approved by the Senate
2.2.5 A student who is awarded a C-, D+, D or E grade for a particular course cannot count that course towards his credit requirements unless he re-sits the Final Examination on a subsequent occasion and obtains a C grade.
2.2.6 A student who either repeats a course or re-sits a Final Examination or is exempted from a course shall be deemed to have obtained a mark, which is not higher than 40% and a grade not higher than C.
2.2.7 A student who withdraws from a course by a written communication addressed to the Registrar within a period of two months from the commencement of the course may be allowed to re-register for that course in a subsequent academic year without being considered a repeat student. The date of commencement of the course shall be as determined by the Senate, for the purpose of this Rule.
2.2.8 A student, who is eligible to sit for the Final Examination in a course (under section 2.3) but has not done so, may postpone sitting such examination, for a period stipulated by the Senate, without being considered as a re-sit candidate. Such a student shall be awarded the grade RX in respect of that course in which he/she is so absent.
65
Award of classes in Bachelor of Technology Degree [Extracts from Relevant Rules and
Regulations]
3. Award of the Degree
3.1 A candidate who satisfies the requirements for the award of the Degree of Bachelor of Technology
(Engineering) as specified in section 3 of the Regulations, and applies for the award of the Degree of
Bachelor of Technology (Engineering) in the prescribed form, shall be awarded the Degree either with:
First Class Honours, or
Second Class Honours (Upper Division),
Second Class Honours (Lower Division), or
Pass, in accordance with the guidelines given in section 3.4.
3.4 A candidate who has satisfied the conditions for the award of the Degree of Bachelor of Technology
(Engineering) in accordance with Regulation 3.1 shall be allotted Grade Points Values (GPV) in respect of
the courses at levels 5 and 6 with higher grades, equivalent to a total of 90 credits, that shall include all
compulsory courses at levels 5 and 6, if applicable. In situations where 90 credits cannot be obtained
exactly, the nearest higher value to 90 credits shall be taken.
2.0 points per credit for grade C
2.3 points per credit for C+
2.7 points per credit for grade B-
3.0 point per credit for grade B
3.3 points per credit for grade B+
3.7 points per credit for grade A-
4.0 points per credit for grade A or A+
The Grade Point Average (GPA) shall be computed as follows:
3.5 A candidate shall be awarded the Degree of Bachelor of Technology (Engineering) according to the GPA
obtained as follows:
3.00 > GPA 2.00: Pass
3.30 > GPA 3.00: Second Class Honours (Lower Division)
3.70 > GPA 3.30: Second Class Honours (Upper Division)
GPA 3.70: First Class Honours
3.6 If the credits gained in any category exceed the maximum limit shown in section 3.1 of the Regulation for the Award of the Degree of Bachelor of Technology (Engineering), only such maxima shown in the section 3.1 of the Regulation shall be used in computing the GPA for the award of the classes.
66
Award of classes in Bachelor of Industrial Studies Degree [Extracts from relevant Rules and
Regulations]
3. Award of the Degree
3.1. A candidate who satisfies the requirements for the award of the Degree of Bachelor of Industrial Studies as
specified in Section 3 of the Regulations, and applies for the award of the Degree of Bachelor of Industrial
Studies in the prescribed form shall be awarded such Degree either with:
First Class Honours, or
Second Class Honours (Upper Division), or
Second Class Honours (Lower Division), or
Pass, in accordance with the guidelines given in Section 3.4.
3.4 A candidate who has satisfied the conditions for the award of the Degree of Bachelor of Industrial Studies
in accordance with Regulation 3.1 shall be allotted Grade Points Values (GPV) in respect of the courses at
levels 5 and 6 with higher grades, equivalent to a total of 72 credits, that shall include all compulsory
courses at levels 5 and 6, if applicable. In situations where 72 credits cannot be obtained exactly, the
nearest higher value to 72 credits shall be taken.
2 points per credit for grade C
2.3 points per credit for C+
2.7 points per credit for grade B-
3 point per credit for grade B
3.3 points per credit for grade B+
3.7 points per credit for grade A-
4 points per credit for grades A and A+
The Grade Point Average (GPA) shall be computed as follows:
3.5 A candidate shall be awarded the Degree of Bachelor of Technology (Engineering) according to the GPA
obtained as follows:
3.00 > GPA 2.00: Pass
3.30 > GPA 3.00: Second Class Honours (Lower Division)
3.70 > GPA 3.30: Second Class Honours (Upper Division)
GPA 3.70: First Class Honours
3.6 If the credits gained in any category exceed the maximum limit shown in section 3.1 of the Regulation for the Award of the Degree of Bachelor of Technology (Engineering), only such maxima shown in the section 3.1 of the Regulation shall be used in computing the total points for the award of the classes.
67
Explanatory Notes for Filling the Application Form – Non PG Programmes Before you start filling the „Application Form‟ please read the following explanatory notes. It will help you to understand the questions and eventually help you to fill in the form. When filling out this form please use BLOCK CAPITAL letters. If a question does not apply to you write „NA‟. Write one number or letter in each box. Write „X‟ in appropriate boxes.
A. PROGRAMME CHOICE A1. Programme Code
Table below shows the Programmes and the Specialisations available in the academic year 2009/10. Programme codes and the specialization codes too are given in the Table.
PROGRAMME SPECIALISATION PROG. CODE
Bachelor of Technology Civil Engineering BT 01
Computer Engineering BT 02
Electrical Engineering BT 03
Electronic & Communication Engineering BT 04
Mechanical Engineering BT 05
Mechatronics Engineering BT 06
Textile Engineering BT 07
Specialisation not yet decided BT 00
Diploma in Technology Civil Engineering DT 01
Computer Engineering DT 02
Electrical Engineering DT 03
Electronic & Communication Engineering DT 04
Mechanical Engineering DT 05
Mechatronics Engineering DT 06
Textile Engineering DT 07
Specialisation not yet decided DT 00
Bachelor of Industrial Studies Agriculture BI 11
Apparel Production & Management BI 12
Fashion Design and Product Development BI 33
Textile Manufacture BI 13
Diploma in Industrial Studies Agriculture DI 11
Apparel Production & Management DI 12
Fashion Design and Product Development DI 33
Textile Manufacture DI 13
Certificate in Industrial Studies Apparel Technology CI 21
Industrial Environmental Hazards CI 22
Textile Technology CI 23
Foundation Programme Foundation Programme in Technology FT 31
Programme Code consists of four boxes. Boxes 1 & 2 are for writing the Programme. For example if you have selected the, “Diploma in Technology” Programme you should write the code corresponding to “Diploma in Technology” Programme, that is DT, in the first two boxes as shown below.
D T
Boxes 3 & 4 are for writing the Specialisation. For example if you have selected the “Electrical Engineering” specialization, you should write the code corresponding to that specialization, that is 03, in the boxes 3 & 4 as shown below.
D T 0 3
A2. Academic Year
Write the following numbers in the relevant boxes 2 0 1 0 / 1 1
A3. Programme Name For example, if you have selected Diploma in Technology Programme and the Mechanical Engineering specialization, you must write them in the boxes as shown below.
D I P L O M A I N T E C H N O L O G Y M E C
H A N I C A L
A4. Currently Registered Student at OUSL Write „X‟ in the appropriate box.
If you are current student then, Yes X No
A5. Current OUSL Student No. A6. Previous OUSL Student No. (Where applicable) Only if you are currently following a programme in OUSL you need to fill these boxes. You need not fill A5 & A6, if you are not following any other programme at OUSL or if you were not a student at OUSL on a previous occasion. A5. If you are a current student write your Registration Number here. A6. If you have followed an OUSL programme previously, state your previous OUSL student Registration Number here.
68
A7. Preferred OUSL Centre Code Write the centre codes of two centres in the order of preference in the appropriate boxes. Include the centres which are closer to your home/workplace, even if currently no activities are held there.
1. 2.
Centre Code Centre Code Centre Code
Anuradhapura K110 Badulla K120 Kegalle K140
Batticaloa K070 Bandarawela K120 Kuliyapitiya C100
Colombo C010 Monaragala M180 Kurunegala K090
Jaffna J060 Galle M040 Polonnaruwa K150
Kandy K030 Gampaha C200 Puttalama C135
Matara M050 Hatton K122 Ratnapura C130
Ambalangoda M041 Hambantota M051 Trincomalee J170
Ampara K080 Kalutara C020 Vavuniya J160
A8. Medium of Study (one only)
Write „X‟ in appropriate box
B. PERSONAL INFORMATION B1. Title Write „X‟ in appropriate box. B2. National Identity Card No. Print one number or letter in each box.
NIC number is compulsory for all Sri Lankan students to register with the OUSL. Currently, if you do not possess one, you are advised to obtain one prior to the registration, which will be in May 2009.
B3. Passport No. Only for Foreign Nationals. Print one number or letter in each box. B4. Initials Print one letter in each box.
R . M . K . . . . . . .
B5. Last Name Write your surname. Print one letter in each box.
J A Y A S U R I Y A
B6. Names Denoted by Initials Write all the names corresponding to each of your initials. Print one letter in each box. Continue to the second line
only after the first line is full.
R A N A S I N G H E M U D I Y A N S A
L A G E K A M A L A
B7. Permanent Address
Write your postal address where we should correspond with you. This address should be a reliable address since all your correspondence with the university will be directed to this address.
7 8 3 / 5 A , N A M A L P L A C E
K A D U W E L A R O A D
M A L A B E
B8. Postal Code Print one number in each box. For example, Nugegoda 10250
B9. Gender Write „X‟ in appropriate box. B10. Civil Status Write „X‟ in appropriate box. B11. Date of Birth (DD/MM/YYYY) Fill in order of Day, Month and Year of Birth. B12. Telephone Numbers Write all your contact telephone numbers (ten digits) in the appropriate columns B13. E-mail Address If you can be contacted through e-mail, please write your e-mail address. Please give only one email address.
69
C. ACADEMIC QUALIFICATIONS C1. G.C.E. (Advanced Level) Results
Write your G.C.E (AL) results of three main subjects and General English with subject code, grade and year of obtaining the results.
Subject Code Subject Code Subject Code
Physics 01 Agriculture Science
08 Higher Mathematics
11
Chemistry 02 Biology 09 Common General Test
12
Mathematics 07 Combined Mathematics
10 General English
13
For all other courses please indicate the code given in your G. C. E. (A/L) Result sheet.
C2. G. C. E. (Ordinary Level) Results
Write your G.C.E (OL) results with subjects, grades and year of obtaining the results C3. Other Relevant / Higher Academic Qualifications If you have any Relevant/Higher academic qualifications listed in Course Guidebook 2009/2010 you may list here
indicating the name of the institution and year of obtaining the qualification. You may ignore the Qualification Code and Institution Code.
C4. Relevant Professional Qualifications
You may write your Professional Qualifications. You may ignore Qualification Code & Title Code.
D. WORK EXPERIENCE D1. Status Write „X‟ in appropriate box. D2. Chronological Order
You may write your work experience in chronological order (i.e., current job at top). You may ignore Org. Code & Title Code.
E. SELECTION TEST E1. Please ignore this section as it is not relevant to students enrolling with the Faculty of Engineering Technology.
F. DECLARATION OF APPLICANT Please put the date and sign the application form.
Please go through the duly filled Sample Application Form given in the next two pages.
70
71
72
A Administration Building (students‟ affairs, finance, examination divisions)
L Automobile Engineering Laboratory
B Senate House M Railway Station –Kirillapone
C Faculty of Humanities and Social Sciences Building
N University Press
D Student Temporary Residential facilities O Health Centre & Day-care E Examination Halls P Book Distribution Centre
F Media House Q Staff Development Centre G Security Post (Narahenpita gate) R Faculty of Engineering Technology at the
Science and Technology Building H University Guest House S Canteen (Common Dining Area) J Library T Buddha Statue K University Pre-School U Faculty of Education Building
U
73
1, 2 Department of Civil Engineering Laboratories
16 Mechanical Engineering Workshop
3 Dept of Agricultural & Plant. Eng. Laboratories
17 Industrial Automation lab and Mechanical Engineering Labs
4 Student Registration Block 18, 19 Department of Electrical & Computer Engineering Laboratories, Electronic workshop
5, 6 Textile & Apparel Technology Laboratories
20 Physics Laboratory
7A RES 23 Elementary Computer Laboratory (UF), Car Park (GF)
7B Auditorium 25 Colombo Regional Centre - Main Building
7C Drawing Room 26 Peoples Bank – University Branch
7D Mechanical Engineering CNC Lab 27 Sub-Post Office (Access from Collambage Mawatha)
8, 9,10 Lecture Halls 28 Examination Halls
9A WUS Shop 29 Automobile Engineering Laboratory
11 Textile & Apparel Technology Dept. Laboratories and Lecture Halls Lecture Halls
30 University Press
12 Department of Electrical & Computer Engineering Laboratories, BSE program office
31 Book Distribution Centre
12, 13, 14, 15
Lecture Halls 32 Student Union Office
74
75
Different Avenues of Entry and Exit to the Technology (Engineering) and Industrial Studies Programmes at the Open University of Sri Lanka
PhD
Mphil
Master of
Technology
Postgraduate
Diploma
Bachelor of
Technology
(Engineering)
Advanced
Certificate in
Technology
Certificate in
Industrial
Studies
Diploma in
Industrial
Studies
Bachelor of
Industrial
Studies
Foundation
Courses
Diploma in
Technology
Work
School
School
School
Work
Work
76
Appendix
THE OPEN UNIVERSITY OF SRI LANKA FACULTY OF ENGINEERING TECHNOLOGY
APPLICATION FOR EVALUATION OF QUALIFICATIONS FOR EXEMPTIONS
IMPORTANT
The following documents must be attached to the Application form: (a) Certified copies of all Educational / Professional Qualifications. (b) Certified copies of the syllabus of each subject of the course/programme to be evaluated. (c) Certified copies of Past papers of each subject of the course/programme to be evaluated. (d) Hand book (prospectus) of the Institution from which the qualification has been obtained. A money order for Rs. 100.00, being the evaluation fee should accompany each application. Money orders should be drawn in favour of Bursar, The Open University of Sri Lanka, Nawala, Nugegoda. If paying in cash, the payment should be made to the Shroff of the Open University and the receipt should be attached. Please send the completed form to, Dean, Faculty of Engineering Technology, The Open University of Sri Lanka, Nawala, Nugegoda 10250 by 15th March 2011.
Please note that applicant should provide certified English translations, if the originals are in a Foreign Language.
INCOMPLETE APPLICATIONS WILL NOT BE ENTERTAINED.
Student personal Information: Name of Student: ……………………..………………………………………….…………..………
………………………..………..………………………………….……….….…… 1. Home Address: …………………………………………………………………………………….………
……………………………………………………………….……………………….…… …………………………………………………………………………………….…….....
2. Telephone: ………………………..………… 4. E-mail :…………………..…………………
FOR OFFICE USE ONLY
Exemptions granted for the Applicant. (Indicate whether it is applicable for this particular student or common for all) …………………………………. ………………… Signature of the Head of the Department Date
77
B. Particulars of the qualifications for which you seek exemptions for courses/programmes.
Title of the course/programme: ……………………………………………………………………………… 1. Title of the award. (i.e. Qualifications): ……………………………………………….…...…………… 2. Name & Address of the Institution, which awarded the above mentioned qualifications:
……………………………….………………………………………………..…………………………….. ………………………………………………………………………………………………………….….…. 3. Duration of the course/programme: ………………….………………………………………………… 4. Year of the award : …………………….……………………………………………….…………………. 5. Is it full time / part time: …………………………………………………………….…………………… 6. Entry requirements to follow the course/programme: …………….……………………………….… ……………………………………………………………………………………….………….……………….. C. Details of courses/programmes mentioned in part (B):
(i) Details of Number of hours spent on each subject:
Subject Year
Time spent (hours)
Lectures
Tutorials
Lab work
Training
(ii) List out the Laboratory experiments done in each subject. (Use separate sheet if
necessary): C. Courses (subjects) in the OUSL programme from which exemptions are requested by the
applicant:
………………………………….. …………………… Signature of the Applicant Date
(A separate form has to be filled for each course/programme)
78
Prepared by the Faculty Guidebook Committee - 2011/2012
Dr. (Mrs.) K Gunasekara
Eng. Dr. AGK de S Abeysuriya
Dr. KAC Udayakumar
Eng. SN Wickramasinghe
Eng.( Mrs) TSS Jayatunaarachi
Mr. JADFM Jayathillake
Eng (Mrs.) DN Ginige
Translations
Eng. JHSK Jayamaha
Eng. (Miss) K Vamathevan
Cover page
Mr. H Gunasekara
Photographs
Mr. Dulip Samarasinhe
Mr. H Gunasekara
Word Processing
Ms. DN Lokuge