protection device - farnell.com · esd231-b1-w0201 maximum ratings finaldata sheet 4 revision 1.1,...
TRANSCRIPT
![Page 1: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/1.jpg)
Power Management & Mult imarket
Data Sheet Revision 1.1, 2015-10-02Final
ESD231-B1-W0201Bi-directional, 5.5 V, 3.5 pF, 0201, RoHS and Halogen Free compliant
ESD231-B1-W0201
Protect ion DeviceTVS (Transient Voltage Suppressor)
![Page 2: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/2.jpg)
Edition 2015-10-02Published byInfineon Technologies AG81726 Munich, Germany© 2015 Infineon Technologies AGAll Rights Reserved.
InformationFor further information on technology, delivery terms and conditions and prices, please contact the nearestInfineon Technologies Office (www.infineon.com)
WarningsDue to technical requirements, components may contain dangerous substances. For information on the types inquestion, please contact the nearest Infineon Technologies Office.Infineon Technologies components may be used in life-support devices or systems only with the express writtenapproval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failureof that life-support device or system or to affect the safety or effectiveness of that device or system. Life supportdevices or systems are intended to be implanted in the human body or to support and/or maintain and sustainand/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons maybe endangered.
![Page 3: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/3.jpg)
ESD231-B1-W0201
Product Overview
1 Product Overview
1.1 Features
Guidelines for optimized PCB design and assembly process available [2]
1.2 Application Examples
• USB 2.0 HA, MIPI, (µ)SD-card (UHS), SIM-card• Control ports for DVI, HDMI, Display Port, and Thunderbolt• Audio Line, Speaker, Headset, Microphone Protection• Human Interface Devices (Keyboard, Touchpad, Buttons)
1.3 Product Description
Figure 1-1 Pin Configuration and Schematic Diagram
• ESD / transient protection of susceptible I/O lines to:– IEC61000-4-2 (ESD): ±30 kV (air/contact discharge)– IEC61000-4-4 (EFT): ±4 kV / ±80 A(5/50 ns)– IEC61000-4-5 (surge): ±12 A (8/20 µs)
• Bi-directional working voltage up to: VRWM = ±5.5 V• Line capacitance: CL = 3.5 pF (typical) at f = 1 MHz• Clamping voltage: VCL = 12 V (typical) at ITLP = 16 A with RDYN = 0.3 Ω (typical)• Very low reverse current. IR < 1 nA (typical)• Minimized clamping overshoot due to extremely low parasitic inductance• Small form factor SMD Size 0201 and low profile (0.58 mm x 0.28 mm x 0.15 mm) • Bidirectional and symmetric I/V characteristics for optimized design and assembly• Pb-free (RoHS compliant) and halogen free package
Table 1-1 Part InformationType Package Configuration Marking codeESD231-B1-W0201 WLL-2-1 1 line, bi-directional M1)
1) The device does not have any marking or date code on the device backside. The Marking code is on pad side.
a) Pin configurationConfigutation_Schematic_Diagram.vsd
b) Schematic diagram
FinalData Sheet 3 Revision 1.1, 2015-10-02
![Page 4: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/4.jpg)
ESD231-B1-W0201
Maximum Ratings
2 Maximum Ratings
Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the component.
Table 2-1 Maximum Rating at TA = 25 °C, unless otherwise specified1)
1) Device is electrically symmetrical
Parameter Symbol Values UnitReverse working voltage VRWM ±5.5 VESD air discharge2)
ESD contact discharge2)
2) VESD according to IEC61000-4-2
VESD ±30±30
kV
Peak pulse power3) PPK 132 WPeak pulse current3)
3) Stress pulse: 8/20μs current waveform according to IEC61000-4-5
IPP 12 AOperating temperature TOP -55 to 125 °CStorage temperature Tstg -65 to 150 °C
Table 2-2 Thermal ResistanceParameter Symbol Values Unit
Min. Typ. Max.Junction - soldering point1)
1) For calculation of RthJA please refer to Application Note [3] 077 Thermal Resistance Calculation.RthJS - 30 K/W
FinalData Sheet 4 Revision 1.1, 2015-10-02
![Page 5: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/5.jpg)
ESD231-B1-W0201
Electrical Characteristics at TA = 25 °C, unless otherwise specified
3 Electrical Characteristics at TA = 25 °C, unless otherwise specified
Figure 3-1 Definitions of electrical characteristics
Table 3-1 DC Characteristics at TA = 25 °C, unless otherwise specified1)
1) Device is electrically symmetrical
Parameter Symbol Values Unit Note / Test ConditionMin. Typ. Max.
Trigger voltage Vt1 6.1 9.5 – VHolding voltage Vh 6.1 7.8 12.5 V IR = 10 mAReverse current IR – – 20 nA VR = 5.5 V
Table 3-2 RF Characteristics at TA = 25 °C, unless otherwise specified
Parameter Symbol Values Unit Note / Test ConditionMin. Typ. Max.
Line capacitance CL 3 3.5 4.1 pF VR = 0 V, f = 1 MHz– 3.2 – VR = 0 V, f = 1 GHz
!
!
"#""# #"#!$%&#'"(""!
)!*""!&"!*+","!*$"!& !$$&$ ! ! !
FinalData Sheet 5 Revision 1.1, 2015-10-02
![Page 6: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/6.jpg)
ESD231-B1-W0201
Electrical Characteristics at TA = 25 °C, unless otherwise specified
Table 3-3 ESD and Surge Characteristics at TA = 25 °C, unless otherwise specified 1)
1) Device is electrically symmetrical
Parameter Symbol Values Unit Note / Test ConditionMin. Typ. Max.
Clamping voltage2)
2) Please refer to Application Note AN210[1].TLP parameter: Z0 = 50 Ω , tp = 100ns, tr = 0.6 ns.
VCL – 12 – V ITLP = 16 A, tp = 100 ns
– 16 – ITLP = 30 A, tp = 100 ns
Clamping voltage3)
3) Stress pulse: 8/20μs current waveform according to IEC61000-4-5
– 8 – IPP = 2 A, tp = 8/20 µs– 10 – IPP = 9 A, tp = 8/20 µs
Dynamic resistance2) RDYN – 0.3 – Ω tp = 100 ns
FinalData Sheet 6 Revision 1.1, 2015-10-02
![Page 7: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/7.jpg)
ESD231-B1-W0201
Typical Characteristics Diagrams
4 Typical Characteristics DiagramsTypical characteristics diagrams at TA = 25°C, unless otherwise specified
Figure 4-1 Reverse leakage current: IR = f(VR)
Figure 4-2 Line capacitance: CL = f(VR)
10-13
10-12
10-11
10-10
10-9
10-8
10-7
10-6
-5 -4 -3 -2 -1 0 1 2 3 4 5
I R [
A]
VR [V]
2.6
2.8
3
3.2
3.4
3.6
3.8
4
-5 -4 -3 -2 -1 0 1 2 3 4 5
CL [
pF
]
VR [V]
1 MHz
1 GHz
FinalData Sheet 7 Revision 1.1, 2015-10-02
![Page 8: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/8.jpg)
ESD231-B1-W0201
Typical Characteristics Diagrams
Figure 4-3 Clamping voltage (ESD): VCL = f(t), 8 kV positive pulse
Figure 4-4 Clamping voltage (ESD): VCL = f(t), 8 kV negative pulse
-15
0
15
30
45
-50 0 50 100 150 200 250 300 350 400 450
VC
L [
V]
tp [ns]
Scope: 6 GHz, 20 GS/s
VCL-max-peak = 31 V
VCL-30ns-peak = 10 V
-45
-30
-15
0
15
-50 0 50 100 150 200 250 300 350 400 450
VC
L [
V]
tp [ns]
Scope: 6 GHz, 20 GS/s
VCL-max-peak = -31 V
VCL-30ns-peak = -9 V
FinalData Sheet 8 Revision 1.1, 2015-10-02
![Page 9: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/9.jpg)
ESD231-B1-W0201
Typical Characteristics Diagrams
Figure 4-5 Clamping voltage (ESD): VCL = f(t), 15 kV positive pulse
Figure 4-6 Clamping voltage (ESD): VCL = f(t), 15 kV negative pulse
-15
0
15
30
45
60
-50 0 50 100 150 200 250 300 350 400 450
VC
L [
V]
tp [ns]
Scope: 6 GHz, 20 GS/s
VCL-max-peak = 47 V
VCL-30ns-peak = 13 V
-60
-45
-30
-15
0
15
-50 0 50 100 150 200 250 300 350 400 450
VC
L [
V]
tp [ns]
Scope: 6 GHz, 20 GS/s
VCL-max-peak = -47 V
VCL-30ns-peak = -12 V
FinalData Sheet 9 Revision 1.1, 2015-10-02
![Page 10: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/10.jpg)
ESD231-B1-W0201
Typical Characteristics Diagrams
Figure 4-7 Clamping voltage (TLP): ITLP = f(VTLP) [1]
-70
-60
-50
-40
-30
-20
-10
0
10
20
30
40
50
60
70
-30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
25
30
35
I TL
P [
A]
Eq
uiv
ale
nt
VIE
C
[kV
]
VTLP [V]
ESD231-B1-W0201RDYN
RDYN = 0.3 Ω
RDYN = 0.3 Ω
FinalData Sheet 10 Revision 1.1, 2015-10-02
![Page 11: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/11.jpg)
ESD231-B1-W0201
Typical Characteristics Diagrams
Figure 4-8 Clamping voltage (Surge): IPP = f(VCL)[1]
-14
-12
-10
-8
-6
-4
-2
0
2
4
6
8
10
12
14
-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12
I PP [
A]
VCL [V]
FinalData Sheet 11 Revision 1.1, 2015-10-02
![Page 12: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/12.jpg)
ESD231-B1-W0201
Typical Characteristics Diagrams
Figure 4-9 Insertion loss vs. frequency in a 50 Ω system
0
1
2
3
4
5
6
7
8
9
1010
-2 0.1 1 10
Inse
rtio
n L
oss (
|S2
1|)
[dB
]
Frequency [GHz]
ESD231-B1-W0201
FinalData Sheet 12 Revision 1.1, 2015-10-02
![Page 13: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/13.jpg)
ESD231-B1-W0201
Package Information
5 Package Information
5.1 WLL-2-1
Figure 5-1 WLL-2-1 Package outline (dimension in mm)
Figure 5-2 WLL-2-1 Footprint (dimension in mm) Recommendation for Printed Circuit Board Assembly[2]
Figure 5-3 WLL-2-1 Packing (dimension in mm)
Figure 5-4 WLL-2-1 Marking example Table 1-1 “Part Information” on Page 3
SG-WLL-2-1-PO V01
±0.030.28±0.010.15
1
2
±0.0
20.
2
0.58
±0.0
3
±0.020.26
Bottom viewTop view
0.36
(0.1
6)
0.27
0.19
0.19
0.19
Copper Solder mask Stencil apertures
0.57
0.24
0.62
0.32
0.24
0.14
SG-WLL-2-1-FP V01
2
0.23
SG-WLL-2-1-TP V02
0.35
0.21
0.68
8
SG-WLL-2-1-MK V03
1
1
Type code
1
1
Type code
Marking on pad-side
FinalData Sheet 13 Revision 1.1, 2015-10-02
![Page 14: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/14.jpg)
ESD231-B1-W0201
References
FinalData Sheet 8 Revision 1.1, 2015-10-02
References[1] Infineon AG - Application Note AN210: Effective ESD Protection design at System Level Using VF-TLP
Characterization Methodology
[2] Infineon AG - Recommendation for Printed Circuit Board Assembly of Infineon WLL Packages
[3] Infineon AG - Application Note AN077: Thermal Resistance Calculation
http://www.infineon.com/dgdl/?fileId=db3a304344f7b4f9014503db540027c0
![Page 15: Protection Device - farnell.com · ESD231-B1-W0201 Maximum Ratings FinalData Sheet 4 Revision 1.1, 2015-10-02 2 Maximum Ratings Attention: Stresses above the max. values listed here](https://reader030.vdocument.in/reader030/viewer/2022041210/5dd0947ed6be591ccb61add9/html5/thumbnails/15.jpg)
ESD231-B1-W0201
FinalData Sheet 9 Revision 1.1, 2015-10-02
Trademarks of Infineon Technologies AGAURIX™, BlueMoon™, C166™, CanPAK™, CIPOS™, CIPURSE™, COMNEON™, EconoPACK™, CoolMOS™,CoolSET™, CORECONTROL™, CROSSAVE™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™,EconoPIM™, EiceDRIVER™, eupec™, FCOS™, HITFET™, HybridPACK™, I²RF™, ISOFACE™, IsoPACK™,MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OmniTune™, OptiMOS™, ORIGA™, PRIMARION™,PrimePACK™, PrimeSTACK™, PRO-SIL™, PROFET™, RASIC™, ReverSave™, SatRIC™, SIEGET™,SINDRION™, SIPMOS™, SMARTi™, SmartLEWIS™, SOLID FLASH™, TEMPFET™, thinQ!™,TRENCHSTOP™, TriCore™, X-GOLD™, X-PMU™, XMM™, XPOSYS™.
Other TrademarksAdvance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, KEIL™,PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSARdevelopment partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™,FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG.FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ ofHilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™ of Infrared DataAssociation Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ ofMathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor GraphicsCorporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS Technologies, Inc., USA. muRata™of MURATA MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of Applied Wave Research Inc.,OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc.RFMD™ RF Micro Devices, Inc. SIRIUS™ of Sirius Satellite Radio Inc. SOLARIS™ of Sun Microsystems, Inc.SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo YudenCo. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA.UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ ofDiodes Zetex Limited.Last Trademarks Update 2010-10-26
Revision History: Rev. 1.0 2015-07-31Page or Item Subjects (major changes since previous revision)Revision 1.1, 2015-10-02All Sales code change from ESD231-B1-CSP0201 to ESD231-B1-W0201