GL

OV

ES

& S

LE

EV

ES

505

973

975

Dexterity Even a Rodbuster Could Love

Tactile Sensitivity Plus Gripping Power

3/4 Coverage Lets You Shake Off the Mess

XS / S / M / L / XL / XXL

XS / S / M / L / XL / XXL

S / M / L / XL / XXL

PROTECTION PLUS REMARKABLE DEXTERITY

BETTER FIT BETTER FEEL BETTER PROTECTIONPrimary Jobs

Handling/ Tying Rebar Pipe FittingGripping Sheet MetalMetal FabricationGlass Handling

Primary JobsGripping Sheet Metal & Steel Metal FabricationPipe FittingWorking With Small Parts

Primary JobsWet Applications Concrete WorkGripping Metal & SteelMetal Fabrication

Hand protection for the construction industry has comea long way since the days of big, clumsy leather gloves.

We’ve developed innovations in high tech fibers. Refined palm coatings to the point of ultra thinness. And reengineered to provide a more ergonomic fit.

Today you can count on Worldwide Protective Productsto deliver a glove that perfectly suits the job at hand. Whether that job is hauling steel or tying rebar. Pouring cement, pulling wire or setting stone.

We are a US manufacturer with years of experience in creating high quality personal protective equipment. This catalog gives you a look at our best sellers when it comes to the construction business. But there’s much more.

1409 Worldwide Lane | Wilkesboro, NC 26897Ph 877-678-4568 | wwprotective.com

© 2016 Worldwide Protective Products, LLC. Advanced Technology Armor, ATA and Tasset are registered trademarks of Worldwide Protective Products, LLC. Kevlar is a registered trademark of E.I. du Pont de Nemours and Company. Lycra is a registered trademark of INVISTA.

If we don’t already make the exact glove you need – hard to imagine given our catalog of 2,000+ products – we’ll work with you to design, fabricate and field test a glove to meet your specifications at no extra charge.

The bottom line: you never have to accept “good enough” when there’s a manufacturer who’s ready to work with you. Give your crew the better fit, better feel and better protection that Worldwide Protective Products can deliver.

At Worldwide, it’s our goal to get the right protection into more hands every day.

Your Safety Is In Our Hands

Worldwide Protective Products wwprotective.com

GLOVES & SLEEVES FOR THE JOB AT HAND

Just like the 973 glove, this is a fine gauge HPPE knit for strength and

dexterity. For the 975, we finish 3 /4 of the hand in sanded nitrile. That back-of-the-hand

coverage lets you shake off anything that might stick to the glove. And provides good all-around

protection for your skin. ANSI level A4 cut and abrasion resistance, too.

We start with a fine gauge knit so you can feel your fingers and use them with

skill. We add a sanded nitrile dip to the palms to give you a better grip, especially

useful when you grab something wet or oily. Made with high performance polyethylene (HPPE),

this glove also gives you ANSI level A3 protection against cuts and abrasions.

Because of the fit and flexibility, this glove is the preferred choice of construction

professionals everywhere. Slip it on, and in just a few minutes it will conform itself to your

hand. The secret is in our unique coating; a thin, black hybrid dip that provides tremendous dexterity

plus ANSI level A4 protection. Holds up well against a wide range of chemicals, too.

MATA30-BH M530

MJVATA MATA10-GLO-PD1

550 M13ATP

More Protection Than Most Leather-Palmed Gloves So Fine, You Can Pick Up an O-ring

Heavy Duty Protection From Cuts, Punctures & Heat Cut Protection Plus Visibility You Can’t Miss

Unique Crinkle Surface For A Great Grip Great Value in Cut Protection & Comfort

S / M / L / XL / XXL S / M / L / XL / XXL

S / M / L / XL / XXL S / M / L / XL

S / M / L / XL / XXL S / M / L / XL

OUR HIGHEST LEVEL OF PROTECTION PROTECTION FOR YOUR WHOLE ARMUNIQUE COLORS FOR ADDED BENEFITS

Worldwide Protective Products wwprotective.com

Primary JobsHandling Oily Sheet MetalGripping Heavy / Rolled SteelHVACGlass HandlingMetal Fabrication

Primary JobsHandling Small, Sharp Parts Glass HandlingMetal FabricationGreat as a Liner Glove

Primary JobsA Favorite of Iron WorkersGripping Heavy / Sheet MetalHandling Rolled SteelHigh Heat Areas

Primary JobsGlass HandlingSheet MetalHVAC InstallationFinishing WorkDrywalling

Primary JobsHandling Plate GlassGripping Sheet MetalBrick, Stone + Cinder BlockMetal Fabrication

Primary JobsGlass Handling Utility CompaniesHandling Solar PanelsGreat as a Liner Glove

Primary JobsLaying Carpet Finishing WorkElectrical InstallationHVAC InstallationDrywalling

960Affordable Protection Plus Dexterity XS / S / M / L / XL / XXL

Primary JobsHVAC Installation Sheet MetalGlass Handling

Primary JobsElectriciansHVAC Installation Sheet MetalGlass HandlingHigh Heat Areas

MS1ATA2X2.5

S2X1

Not Too Tight, Not Too Hot

A Rare 8 cal/cm2 Arc-Rated Knit Sleeve

18” (T) to 26” (T)

16” (T) to 26” (T)

There are times when a thick, 10-gauge glove works in your favor. Like handling

plate glass, sheet metal, or sharp-edged stone or other masonry. And there’s more:

We developed a unique crinkle finish for the latex-dipped palm; great for gripping smooth

surfaces, and won’t leave prints. With ANSI level A4 cut and abrasion resistance, these

gloves wear like iron.

Our best-selling leather and canvas glove. It’s heavier than others and

gives your hands ANSI level A5 protection against cuts and abrasions. Good protection

against hot metal, too. Split cowhide reinforces the palm, fingers and knuckles, with a canvas

backing for support. An ATA® knit liner keeps your hands comfortable. Sewn entirely with Kevlar® thread. Safety cuff gives you quick, easy on/off.

The original Boar Hog glove, in 7-gauge knit so your hands breathe

and stay cool. Split leather palm absorbs cutting oil and grease, making it easier to

grip slippery objects. Extra reinforcement in the thumb crotch, the first place most gloves wear

out. Our exclusive ATA® technology delivers ANSI level A6 cut protection; most competitors settle with level 3 or 4 in their knock-offs of this industry favorite.

Get dexterity down to your fingertips in a light weight, form fitting glove. Pick

up razor-sharp parts, and know you’ve got ANSI level A4 protection against cuts

and abrasions. We gave it lots of stretch, using Lycra® fibers with our ATA® Technology.

Added Benefit: Hide-Away color makes it look like new, even after multiple washes. The M530 is also worn as a liner under leather or driver-style gloves.

Instead of a nitrile, we put a polyurethane palm coating on our fine

gauge HPPE glove. The result is ANSI level A3 cut resistance that won’t break the

bank. Polyurethane is slightly thinner, delivering dexterity that lets you pick up screws. The choice

of carpet layers, it protects against both lacerations and abrasions. Also guards against sharp edges when installing HVAC or framing metal studs.

The guy in this photo is a champion power lifter. We’re talking huge arms.

But thanks to the extreme stretch of this sleeve, it fits. It also gives you ANSI level A4

protection in a sleeve so thin, you can almost see through it. Keeps your arm nice and cool.

Great for guys running wire through walls, past HVAC equipment, metal studs and other razor sharp edges. Ideal for handling glass and sheet metal, too.

This sleeve does double duty. Arc rated at 8 cal/cm2 (HRC level 2), it’s great for

electricians installing circuit breakers, generators and more. And with ANSI level A5

cut resistance, workers handling glass and sheet metal count on it to protect them against lacer-

ations. At 5” wide, it can be layered over a shirt or worn on its own. Even fits guys with big arms.

Developed at the request of one of the world’s top construction companies.

This glove lets the guys on the ground wear ANSI level A3 cut-resistant gloves at

all times. Plus it improves hand signal communication between them and the crane

operators up above. For both wearers and co-workers, increased visibility dials up awareness and helps reduce accidents.

A solar company asked Worldwide for a thin, comfortable, cut-resistant glove for

handling plate glass panels. We turned to ATA® technology and developed the M13ATP.

The feel is cool and silky smooth. The protec-tion is ANSI level A2. And the price is remarkably

affordable. Added Benefit: The bright white design makes it a favorite for QC and inspections.