protective eyewear - mycashflow

PROTECTIVE EYEWEAR

THE QUEEN’S AWARDSFOR ENTERPRISE:

INTERNATIONAL TRADE2007

WINNER INSPECS INSPECS - UK7-10 Kelso Place Upper Bristol Road Bath BA1 3AU - UK Tel: +44 (0)1225 717000 Fax: +44 (0)1225 717001 Email: [email protected]

INSPECS - USA 129 N. Fort Harrison AvenueClearwaterFlorida 33755 - USA Tel: +001 (727) 771 7710 Fax: +001 (727) 771 7712 Email: [email protected]

CAT-CSA-1

www.cat.com www.caterpillar.comInspecs Ltd. a global licensee of Caterpillar Inc. © 2011 Caterpillar. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and “Caterpillar Corporate Yellow”, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Not all protective eyewear is the same...

Lens locks into housing for secure impact resistance

Rubber nose fit molded for comfort

2.2mm polycarbonate lens material tested at velocity to shield from impactCrystal clear optical class 1 lens for all models – distortion free vision, reduces eye fatigue and headaches - for continuous daily use

High comfort rubber tip composite

Multi-length adjustment with four locking positions

Protective brow guard injected in strong and flexible nylon - this perfectfinish resists corrosion, air pollution and continuous skin contact

Hard coated both sides for resistance to scratching byfine particles, acids and solvents for ultra-clear vision

Treated in a purified and strictlydust-free environment

Lens is ultrasonically cleaned prior to fog prevention coating to maximise optical clarity

Lenses tested for optical and mechanicalperfection, impact and chemical resistance, high and low temperature response, and by coating analyser and abrasion tester toensure quality.

Many eye injuries occur when glasses are lifted toget a closer look – that’s why clarity of visionthrough your protective eyewear is crucial. Keep them on throughout the job!

Cat® safety eyewear eliminates the reasons whyyou’d remove the frame. Anti-fog coatings andventilation systems, anti-scratch and easy clean are all features that enhance your visual experience. Single hand lens angle adjustment means you don’t have to remove the frame to alter the inclination.

As a frame is only as good as its fit and no two faces are alike, Cat frames are ergonomicallydesigned to flex-fit your individual facial shape. Temple lengths and angles can be individuallyadjusted, and snap lock into position for security.

Cat frames offer optimum protection.Polycarbonate lenses provide the ultimate ocular shield, locked in three directions to resist impact from front or side. Frame materials are tested to resist chemicals and impact from particles.

Cat has the comfort and style angle covered too. Looking good and feeling good in your eyewearincreases wearability. Flexible materials offer apressure-free fit for continuous wear. Tips and bridges are non-slip. Frames are lightweight.

Engineered to the core for total comfort, optimisedreaction times and better risk assessment.Your clear vision ensures reduced risk of injury.

Cat protective eyewear meets and exceedsthe following international standards forquality and safety:

CE EN 166:2001ANSI Z87.1:2003CSA Z94.3:2007AS/NZS 1337

... Cat® Protective Eyewear

Retina

Muscle

Optic nerve

Iris

Pupil

CorneaCrystalline lens

Manufacturers mark

Number of EN standard

Symbol of mechanical strengthat extremes of temperature

Symbol of conformity to EC directive

Scale number of filter

Optical class

Symbol of mechanical strengthat extremes of temperature

Manufacturer’s mark

The eye is a fragile organ – a small fleck of dust can cause conjunctivitis, a solid particle at high speed can cause a perforation of the eye, the detachment of the retina, or permanent loss of sight.

Acute irritation of the eye and burns from chemicals and solvents can also cause partial to total loss of sight.

In the UK the department of Trade and Industry reports 120,000 accidents involving eye injuries every year. In the US 1000 work-related eye injuries occur every day. Over 10% of these result in a missed day of work. The majority of these come from foreign objects, blows, chemicals and cuts to the eye -which are all preventable by wearing the correct safety eyewear.

... your eyes

Cat protective eyewear meets and exceedsthe following international standardsfor quality and safety:

CE EN 166:2001ANSI Z87.1:2003CSA Z94.3:2007AS/NZS 1337

The standards scientifically prove that allCat frames:

• Withstand extreme pressures of heat and cold

• Resist mass impact at velocity

• Shield against chemical splash

• Provide excellence in optical quality including resilience to UV and other harmful rays

Lens Specification

• lens inclination adjustment with snap-lock ratchet mechanism

• single wraparound 180 degree lens

• 2mm polycarbonate material tested at velocity to shield from impact

• crystal clear optical class 1 lens recommend-

ed for continuous wear

• fog prevention coating

• hard coated both sides for resistance to scratching

Lens Colours

Digger -100Clear - filter category 2C-1.2

Digger -103Brown - filter category 5-2.5

Digger -104Smoke - filter category 5-2.5

Digger -105Blue Mirror - filter category 5-2.5

Digger -112Yellow - filter category 2-1.2

Digger -116Orange - filter category 2-1.7

DIGGER

Frame Chassis

• protective brow guard injected in buff polished nylon

• multi-length temple adjustment with 4 locking positions

• high comfort PVC tip composite

• PVC nose fit moulded for comfort

Weight - 26g / 0.917oz

Multi position adjustable front

Soft moulded contact points

148mm - 160mm extendable sides

Universal wrap fit designed around different face shapes

Lens Specification

• four lens inclination adjustments with snap-lock ratchet mechanism


• 2.2mm polycarbonate material tested at velocity to shield from impact





Lens Colours

Dozer -100Clear - filter category 2C-1.2

Dozer -103Brown - filter category 5-2.5

Dozer -104Smoke - filter category 5-2.5

Dozer -105Blue Mirror - filter category 5-2.5

Dozer -112Yellow - filter category 2-1.2

Dozer -116Orange - filter category 2-1.7

DOZER

Frame Chassis



• Rubber nose fit soft-moulded for comfort


Four position adjustable front




Lens Specification

• three lens inclination adjustments with snap-lock ratchet mechanism






Lens Colours

Tread -100Clear - filter category 2C-1.2

Tread -103Brown - filter category 5-2.5

Tread -104Smoke - filter category 5-2.5

Tread -105Blue Mirror - filter category 5-2.5

Tread -112Yellow - filter category 2-1.2

Tread -116Orange - filter category 2-1.7

TREAD

Frame Chassis

• flex temples with integrated cushioning system

• neck cord attachment facility

• upper and lower eye protection, vented for air flow and fog resistance

• soft touch vented nose piece


Neck cord attachment point

Cushioned temple tips


Three position adjustable front

Lens Specification

• lens inclination adjustment with snap-lock ratchet mechanism


• 2mm polycarbonate material tested at velocity to shield from impact



• colour coded integrated nose fit



Lens Colours

Belter -100Clear - filter category 2C-1.2

Belter -103Brown - filter category 5-2.5

Belter -104Smoke - filter category 5-2.5

Belter -112Yellow - filter category 2-1.2

BELTER

Lens inclination adjustment


Frame Chassis


• high comfort rubber tip composite




Lens Specification


• high wrap moulded lens for upper and lower protection

• crystal clear optical class 1 lens recommended for continuous wear


Lens Colours

Mortar -100Clear - filter category 2C-1.2

Mortar -104Smoke - filter category 5-3.1

Mortar -112Yellow - filter category 2-1.2

MORTAR

Frame Chassis

• universal fit

• temple designed for comfortable fit with safety helmet

• polycarbonate temples


Durable polycarbonate construction


Lens Specification



• crystal clear optical class 1 lens recommended for continuous wear



Lens Colours

Track -100Clear - filter category 2C-1.2

Track -103Brown - filter category 5-2.5

Track -104Smoke - filter category 5-2.5

Track -105Blue Mirror - filter category 5-2.5

Track -112Yellow - filter category 2-1.2

TRACK

Frame Chassis

• universal fit

• polycarbonate temples co-injected with soft tips


• colour coded integrated nose fit




Guaranteed against manufacturing faults for the lifeof the prescription, Cat RX safety eyewear is a better value and safer investment than repeated purchases of throwaway specs over the same time period. It’s a fact that spectacle wearers are already in the habit of caring for their optical frames.

Three polycarbonate side shield options have been specially designed to offer both lateral and upperprotection. No shield type uses rivets so the overall effect is as streamlined and ‘invisible’ as possible. Because they cannot be removed after the frame is glazed there is no risk of being unprotected when wearing the frames.

Option 1: Integrated side shields are permanently built-in to the frame at the point of manufacture.

Option 2: Snap-lock side shields arrive separate to the frame, but on glazing the side shield is permanently locked to the frame.

Option 3: Removeable side shield can be taken offafter work.

Meeting the legislation means ensuring frames are worn at all times, so it helps to choose stylish frames that you enjoy wearing. Catering for the biggereyesize (up to 58) each frame is constructed from robust construction materials with industrial Catsignature details.

Each optical frame is CE marked and meets andexceeds the following international standards for safety:

BS EN 166ANSI Z87.1:2003CSA Z94.3:2007BSEN 1811 Nickel ReleaseBSEN 12870 General Standards for Opthalmic Frames

Cat RX Safety Eyewear

Front loading safety rim, higher on inside edgefor security from impact

Accommodates single, bifocal and varifocal lenses

Individual frame adjustment (temple area, nosepad area, tip area)

Flex spring hinges

Natural handfinished acetate CAT tips

Polycarbonate Cat side shield

Lightweight structurally robust stainless steel

To enable the guarantee, the frames must be glazed by our recommended glazing house and Cat recommends the use of polycarbonate lenses. Compared to alternative materials the benefitsof polycarbonate lenses are:

• ahigherimpactresistancefromflyingparticles• morelightweightandthinaidingyourcomfort• saferthanallothermaterialsandrigorously tested using a 6mm 0.86g ball fired at the lens at 45m/s

Cat RX safety frames can accommodate allprescriptions for single vision, bifocal or varifocallenses from – 6 to +6.

RESISTOR

34

17 58 140

Frame Colours

003 Matt Brown

004 Matt Black

005 Matt Gun

Frame Specification

• integral monoblock spring hinges

• deboss temple design with precision laser engraved logo

• robust frame construction

• pop on side shield

• shatterproof PC side shields

• fully adjustable acetate tips

• silicone anti-slip nose pads

full frame • metal • pop on shield

SHELTER

33

18 55 140

Frame Colours

003 Matt Brown

004 Matt Black

005 Matt Gun

Frame Specification



• robust frame construction

• removable side shield




supra • metal • removable side shield

ARMOUR

31

18 54 140

Frame Colours

003 Matt Brown

004 Matt Black

005 Matt Gun

Frame Specification

• machinery inspired detail to temples

• durable stainless steel chassis

• precision laser engraved logo

• integrated side shield




supra • stainless steel • integrated side shield

DEFENDER

34

17 58 140

Frame Colours

003 Matt Brown

004 Matt Black

005 Matt Gun

Frame Specification



• robust double bridge design

• pop on side shield




full frame • metal • pop on shield

BARRIER

32

18 52 140

Frame Colours

003 Matt Brown

004 Matt Black

005 Matt Gun

Frame Specification

• machinery inspired detail to temples

• durable stainless steel chassis

• precision laser engraved logo





full frame • stainless steel • integrated side shield

INSULATOR

35

16 57 140

Frame Colours

100 Crystal Clear / Black

104 Matt Black

Frame Specification

• non conductive - no metal parts



• ultra lightweight universal fit

full frame • CP/PC • integrated side shield

BELTER

wraparound rimless

153mm - 168mm

24g / 0.846oz

nylon

yes

yes

pvc with rubber

pvc with rubber

class 1

polycarbonate

99% absorbed

sterile sealed pack

yes

yes

MORTAR

wraparound rimless

115mm

23g / 0.811oz

PC

no

no

PC

PC

class 1

polycarbonate

99% absorbed

sterile sealed pack

no

no

DIGGER

wraparoundsemi-rimless

148mm - 160mm

26g / 0.917oz

nylon

yes

yes

pvc with rubber

pvc with rubber

class 1

polycarbonate

99% absorbed

sterile sealed pack

yes

yes

TREAD

wraparound full frame

157mm

29g / 1.02oz

nylon

no

yes

pvc with rubber

pvc with rubber

class 1

polycarbonate

99% absorbed

sterile sealed pack

yes

yes

DOZER

wraparound rimless

148mm - 160mm

24g / 0.846oz

nylon

yes

yes

pvc with rubber

pvc with rubber

class 1

polycarbonate

99% absorbed

sterile sealed pack

yes

yes

TRACK

wraparound rimless

159mm

25g / 0.881oz

polycarbonate

no

no

pvc with rubber

pvc with rubber

class 1

polycarbonate

99% absorbed

sterile sealed pack

yes

yes

format

temple length

weight

frame material

adjustable temple length

adjustable temple angle

nose contact

ear contact

colours

optical standard

lens material

UV filter

packaging

anti fog

anti scratch

SHELTER

supra

55mm

33mm

18mm

140mm

yes

metal

yes

yes

pvc

acetate tips

5.5

removable shield

hard case

microfibre cloth

DEFENDER

full

58mm

34mm

17mm

140mm

yes

metal

yes

yes

pvc

acetate tips

5.5

pop on shield

hard case

microfibre cloth

RESISTOR

full

58mm

34mm

17mm

140mm

yes

metal

yes

yes

pvc

acetate tips

5.5

pop on shield

hard case

microfibre cloth

ARMOUR

supra

54mm

31mm

18mm

140mm

no

stainless steel

yes

yes

pvc

acetate tips

5.5

integrated permanent

hard case

microfibre cloth

BARRIER

full

52mm

32mm

18mm

140mm

no

stainless steel

yes

yes

pvc

acetate tips

5.5


hard case

microfibre cloth

INSULATOR

full

57mm

35mm

16mm

140mm

no

CP/PC

no

no

cp

polycarbonate

6


hard case

microfibre cloth

format

eyesize

lens depth

bridge size

temple length

sprung temple

frame material

adjustable temple tip

adjustable nosepad

nose contact

ear contact

colours

lens base curve

shield type

packaging

cleaning equipment

www.cat.com www.caterpillar.comInspecs Ltd. a global licensee of Caterpillar Inc. © 2011 Caterpillar. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and “Caterpillar Corporate Yellow”, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

protective eyewear - mycashflow

Documents