prusaprinters · 2019-06-01 · linux user group oberschwaben waving groot view in browser updated...
TRANSCRIPT
Linux User Group Oberschwaben
Waving Groot
VIEW IN BROWSER
updated 1. 6. 2019 | published 1. 6. 2019
PRUSAPRINTERS
Summary
Print Time 91 Hours. 20 cm height 0.4 nozzle. Easywood Coconut filament0.15 layer height Slicer layers used to set more quality.
Easywood feels like real wood and it even smells like it :-) Very coolfilament.
Got the model from Byambaa on thingiverse: https://www.thingiverse.com/thing:2014307
Toys & Games > Action Figures & Statues
marvel groot
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
95.4 MBupdated 1. 6. 2019
No supports No raft Make sure that is sticks on the buildplate before tryingthis :-)
Find source .stl files on Thingiverse.com
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—No Derivates
✖ | Sharing without ATTRIBUTION ✖ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
waving_groot_155cm.stl