pt ami hot oil system
TRANSCRIPT
-
8/7/2019 Pt Ami Hot Oil System
1/6
PT AMI HOT OIL SYSTEM
Hot oil are used to dissolve PTA slurry in PTA
heater (BE-506A/B) and to generate steam 28Kg/cm2.G in OSBL Boiler (AE-102A/B).
-
8/7/2019 Pt Ami Hot Oil System
2/6
Hot Oil Properties :
Hot oil type : Therminol 66
Appearance : Clear, pale yellow liquid
Composition : Modified terphenyl
Flash Point (ASTM D-92) : 184 C (363 F)
Fire Point (ASTM D-92) : 212 C (414 F)
Density at 25 C : 1005 kg/m3 (8.39 lb/gal)
Normal Boiling Point : 359 C (678 F)
Optimum Use Range : 0-345 C (30-650 F)
Hot oil is analyzed by hot oil supplier (Solutia) once times per year
-
8/7/2019 Pt Ami Hot Oil System
3/6
Operations
Heaters: Proper fluid-heater operation will help ensure
long life of the fluid. Common heater problems include
flame impingement, excessive heat flux, controlovershoot, low fluid flow, and interlock malfunctions.
Piping and pumps: A leak-free system will help to
ensure safe and reliable operation.
-
8/7/2019 Pt Ami Hot Oil System
4/6
Hot Oil System Control
There are some hot oil control :
1. ATIC120B (to control hot oil OSBL furnace
temperature) shut down setting : 340o
C2. AFIC104 (to control hot oil minimum flow) flow
setting 600 m3/hr
-
8/7/2019 Pt Ami Hot Oil System
5/6
-
8/7/2019 Pt Ami Hot Oil System
6/6