COMPANY PROFILE

PT BETON PERKASA WIJAKSANASCAFFOLDING & FORMWORK ENGINEERING

GENERALEstablished on March 31st, 1983 PT Beton, as one of the pioneer in POLAGROUP, is the first company in Indonesia with one specific business in Scaffolding & Formwork Engineering.

Today as the market leader in Scaffolding & Formwork Engineering for Building Construction, CivilConstruction and Industrial Construction project and trusted by Domestics and Multinational Contractors, as well as its Joint Operation.

With the reliable and strong support of engineering design, construction drawing, structure calculation and site supervision, PT. Beton Perkasa Wijaksana has shown the most cost saving of the completed and running projects, due to:• Speed up of construction time.• Improvement of concrete quality and surfaces• Increase of total re-use of the shuttering material and system.• Improvement of site cleanliness environment.

In upgrading the reliable qualified services, PT. Beton Perkasa Wijaksana is in cooperation with overseas principal in its field, as follows:PERI GmbH : Germany ,for Formwork & ScaffoldingRORO Gerustbau GmbH : Germany ,for Heavy Duty Shoring & False workHory Corporation : Japan, for Hory Beam and its related products

To improve the competitiveness and to support the government program in local content program, PTBeton Perkasa Wijaksana began local manufacturing in Indonesia since 1985 for domestic supply as well as Asia Pacific Construction Market.

The Scaffolding & Formwork Engineering, supplied by PT. Beton Perkasa Wijaksana, has been proven in more than 2.500 middle and large-scale projects in Indonesia and Asia Pacific by middle and upper class worldwide known main contractors.More than 65% of high rise building project and 90% fly over projects in Indonesia, especially Cawang-Tanjung Priok fly over, Harbour Road toll way, Jakarta Outer Ring Road at Jakarta & Metro Manila Skyway project in the Phillipines, each about 10 KM elevated section is the real proof of services from PT Beton Perkasa Wijaksana.

We implement ISO 9001 to our company. The certification was awarded to our company in April 1997. With the ISO certification we will improve and maintain our product quality standard to meet the global market demand. In addition our metal-arc active gas welding are DIN 18800-7, DIN EN 12810, DIN EN 12811, DIN EN 12812, DIN EN 12813 certified (GSI SLV Munchen).

OUTLINEDate Of Establishment : March 31st, 1983

Main Business : Sales , Rental & Services of Scaffolding & Formwork Engineering and its related products with support of qualified engineering and manufacturing.

• PERI HANDSET WALL FORMWORK• PERI PD 8 SHORING SYSTEM• PERI UP SHORING SYSTEM• PERI VARIO FORMWORK• POLA SCAFFOLDING SYSTEM• RORO HEAVY DUTY SHORING SYSTEM• RORO HEAVY DUTY TRUSS T-50 SYSTEM

Products :

Total Employees : 579 Employees

Managing Director : Mr. Halim Santosa, Ir Mr. Achmad Indra Sahab

Company Banker : Bank Mandiri : Bank Central Asia : Deutsche Bank : Bank BNI

Factory Facilities

Land : 100,000 M2Office Building : 600 M2Production Building : 6,000 M2

Equipments

• 1 units, Shearing Machine Max 13 mm• 1 units, 100 T Press Brake• 3 units, Rolling Machine• 2 units, Optical Cutting Tolls• 1 unit , Computerized Weight Balance• 11 units, 25 T to 150 T Punching Machine• 60 units, Various Welding Machine CO & Electrode• 1 unit, 100 T Press Brake• 7 units, Over head crane• 8 units, Gap Bed Lathe Machine• 9 units, Drilling Machine• 15 units, Milling Machine

Certificate Standard' Is0 9001 :2008

Certificate Registr. No. 01 100 79383 . . 1 .

. .. . '

TiJV Rheinland Cert GmbH certifies: I

Certificate Holder: PT Beton Perkasa Wijaksana JI. Penjernihan I No. 40 Jakarta 10210, Indonesia

including the locations adording to annex I

Scope: Design and Development, Manufacturing, Sales and Rental of I ~ok -work and Scaffolding

1 . I

An audit was performed, Report No. 79383. Proof has been furnished that the reauirements according to IS0 9001 :2008

The due date for all future audits is 31 -07 (dd.mm). 9

e cerW~cate is valid from 2012-09-06 until 201 5-07-08. First certification 1998

2012-09-06

Am Grauen Stein e51105 Kbln

L

u- ---A --IO(I-u

IAF

Precisely Right.

HEAD OFFICE & FACTORY Jl. Raya Serang Km. 16,7, Cikupa Tangerang -15710Phone : +62-21- 596 0765Fax : +62-21- 596 0767

JAKARTA Jl. Penjernihan 40, Jakarta 10210Phone : +62-21- 571 2644Fax : +62-21- 573 8583 / 571 2633 Jl. Mangga No:09Ceger Raya TMIIJakarta Timur 13820Telp : +62-21 - 8459 4115Fax : +62-21 - 8459 4115

BANTEN Ruko Modern Land Blok DR.19Cipondoh 15118Telp :+62-21 - 552 8561 Fax :+62-21 - 552 8561

BANDUNG Perkantoran MTC Blok 1.18JL.Sukarno Hatta No .590Bandung 40286Phone : +62-22 - 753 6467Fax : +62-22 - 753 6467

SEMARANG Kawasan Industri Tugu Wijaya KusumaJl.Tugu Industri IV/1BSemarang 50100Phone : +62-24 - 866 5624/5Fax : +62-24 - 866 5626

PASURUAN Jl. Surabaya Malang Km 49-50Pandaan - Pasuruan, 67156Phone : +62-343 - 630 039/40Fax : +62-343 - 635 026

LAMPUNGJl. Teuku UmarGang Donal No.23 KedatonBandar Lampung 35148Phone : +62-721 - 708 904Fax : +62-721 - 708 904

Address :

BALI Jl.Raya Sempidi No.I5Banjar Uma GunungMengwi – Badung, Bali 80354Phone : +62-361 - 315 3601Fax : +62-361 - 428 950

MEDAN Gedung WIKA Lantai III Blok IJl.Gunung Krakatau No. 15Medan - 20239Phone : +62-61 - 661 5822Fax : +62-61 - 661 5822

PALEMBANGJl.Lintas Timur Sumatera KM 28.5 Indralaya – Palembang 60662Kabupaten Ogan IlirPhone : +62-711- 580 419/20Fax : +62-711- 580 505

KALIMANTAN Jl. Hasanudin ( Karingau ) RT. 48 NO.28Kel.Karang Joang, Kec.Balikpapan Utara.Kalimantan Timur 76127Phone : +62-542 - 758 8210 / 758 8211Fax : +62-542 - 758 8212

MAKASSAR Jl.Perintis Kemerdekaan Km.16 No.16 Block EKec.Biringkanaya – DayaMakassar 90241Phone : +62-411 - 512 862Fax : +62-411 - 512 863

PEKANBARU Jl.Lintas Timur Sumatera Km16Kulim PekanbaruPhone : +62-761 - 781 5646Fax : +62-761 - 781 5646

Jl. OK M JamilKomp. Bisnis Center, Blok A No.8Pekanbaru 28282Phone : +62-761 - 46 825/26 Fax : +62-761 - 38 341

E mail for Domestic : bpw@betonperkasa.comE mail for Overseas : exp@betonperkasa.com

CIKUPA :Warehouse : 2,600 M2

Open Storage : 20,000 M2

Facility : 2 units, 5T Gantry Crane : 1 unit , 25T Tadano Crane : 6 units, 2 to 5T Forklift : 3 units, 4T Colt Truck

SURABAYA : Warehouse : 960 M2

Open Storage : 17,535 M2

Facility : 1 units, 4T Truck : 2 units, 2,5T Forklift

SEMARANG :Warehouse : 400 M2

Open Storage : 5,300 M2

Facility : 1 Units, 4T Truck : 1 Units, 2 to 5T Forkift

PALEMBANG :Warehouse : 450 M2

Open Storage : 10.000 M2

BALIKPAPAN :

Warehouse : 300 M2

Open Storage : 1.500 M2

WAREHOUSE :

MAIN CUSTOMERDOMESTIC CONTRACTORS

PT. Acset IndonusaPT. Adhi Karya, TbkPT. Brantas Abipraya (Persero)PT. Catur Bangun MandiriPT. Hutama Karya (Persero)PT. Jaya Konstruksi MPPT. Jaya Kusuma SaranaPT. Krakatau EngineeringPT. Multi Brata AnugrahPT. Multi Bangun Adiguna(Multikon)PT. Multi Kurnia UtamaPT. Murinda Iron SteelPT. Nindya Karya (Persero)

PT. Balfour Beaty SaktiPT. Bam DecorientPT. IndonakanoPT. Kajima IndonesiaPT. Leighton Contractor IndonesiaPT. PP TaiseiPT. TOA CorporationPT. Takenaka IndonesiaShimizu Corporation

COMTEC TCS S.R.L. - ITALYPERI JAPAN K.K. - JAPANPERI (L.L.C.) - UEAPERI (KOREA) LTD. - KOREAPERI ASIA PTE. LTD. - SINGAPOREPERI AUSTRALIA PTY. LTD. - AUSTRALIAPERI FORMWORK MALAYSIA SDN. BHD. PERI GMBH - GERMANYMALAYSIANINIVE - ITALY

PT. Nusa Konstruksi Engineering,TbkPT. Nusa Raya CiptaPT. Pembangunan Perumahan, TbkPT. Pulau Intan Baja Perkasa KPT. Swadaya Hada GrahaPT. Sumber Mitra JayaPT. Tatamulia Nusantara IndahPT. Total Bangun Persada, TbkPT. Rekayasa Industri PT. Waskita Karya, TbkPT. Wijaya Karya, TbkPT. Wijaya Kusuma KontraktorPT. Yasa Patria Perkasa

Hutama – RSEA JoHutama – Takenaka, JoHutama – RSEA – PNCC, JoMultikon – STC, JoTokyu – Waskita, JoWaskita – Kajima JoWaskita – Adhi - Hutama, JoWaskita – PP, JoWika – Jaya Konstruksi MP, Jo

PT. AE Material Handling SystemPT. Ote Engineering Indonesia PT. Freeport IndonesiaPT. Nestle IndonesiaPT. Newmont Nusa TenggaraPT. Pola Artistika Citra PerkasaPT. Pola Inti PerkasaPT. Pola Gondola AdiperkasaPT. Pupuk KaltimPT. Semen Holcim

MULTINATIONAL CONTRACTORS JOINT OPERATION CONTRACTORS

EXPORT OTHERS

HISTORYMar 1983 Establishment of the company in ready mix concrete business

Mar 1985 Continue sales business of Formwork & Scaffolding from PT Essi Perkasa Utama to the company as Concrete Forms Specialist in Form subcontractor

Mar 1986 Establishment of workshop at Jl. Panjang, Kebon Jeruk, Jakarta

Sep 1987 Agency Agreement with Peri GmbH

Jul 1988 Representative Agreement with Thyssen Roro Gerustbau GmbH, for Heavy duty shoring and False work equipment

Jan 1989 Moving the workshop to Cikupa, Tangerang

Nov 1989 Sole Agency Agreement with Hory Corporation

Oct 1991 Sole Distributor Agreement with Betomax Kunstoff und Metallwarenfabrik Gmbh, Germany for Formwork Accessories

Jul 1992 Joint Operation Agreement to produce Hory Frame Scaffolding with PT Spindo for export to Hory Corporation - Japan

Sep 1992 Implementation of Total Quality Control and Quality Control Circle incorporated in VOSTA system

Feb 1994 Exclusive Distributor Agreement with Roro Gerustbau GmbH for sales in Indonesia and Non Exclusive Agreement for Hongkong,Thailand, Bangladesh, Burma, Malaysia, Singapore, Philippines and Australia.

Mar 1998 Joint Venture Agreement with Peri GmbH, Germany

Apr 1998 First ISO 9002 Certification from TUV, Germany

Jan 2000 First certification of own Welding Engineer by Schweisstechnische Zentralanstait

May 2000 First certification of welders by GSI SLV, Germany

Apr 2000 First U Stamp Certification for Peri Up scaffolding

Aug 2005 Setting up of Exhibition Hall at Head Office, Cikupa, Tangerang

Jan 2007 Formwork subcontracting business is separated under PT Beton Konstruksi Wijaksana in order the company to focus in sales and rental

Oct 2010 Establishment of Pre Treatment and Powder Coating Plant

Aug 2012 Re-certification of U-Stamp for Peri Up scaffolding

Jan 2013 Installment of Galvanize Plant

40 41

Wall FormworkLIWA Panel FormworkLightweight wall formwork with cleverly designed corner solution

HANDSET Panel FormworkVariable foundation formwork with a minimum of panels

Where previously timber, boards and nails dominated shuttering operations, in extreme cases only one man works by hand but nevertheless with system. In particular, small surfaces can be realized in an extremely effective way.

SystemizedA minimum of panel widths ensure a high level of utilizationCleverOnly one connecting part is used for all panel connections – the HANDSET clip FunctionalContinuous adaptability of the panels through the Nonius grid pattern

LIWA is the lightweight panel formwork with only few panel widths and a very sim-ple corner design: at the same time, each standard panel is also a multi-purpose panel with a perforated strip. In the process, the low number of different-sized panels accel-erates the material planning and ensures easy storage in the stockyard and on the construction site.

With the LIWA multi panels, columns from 15 x 15 cm up to 55 x 55 cm can be formed in 5 cm increments. The columns are anchored with corner connectors and standard DW 15.

The brackets allow fast installation of concreting scaffold and provide a very high level of safety for the user.

VersatileLow weight, with only 4 system heights and 5 panel widthsSpecial featureEach standard panel is, at the same time, a multi-purpose panel with a perforated stripSimpleInset tie points, extensive range of accessories

■Forming by hand due to the low weight■Can also be used for columns through multi-purpose panels without requiring any

special panels■Standard panel joints with wedge connector, compensations up to 5 cm with the

wedge clamp compensation and length compensation up to 25 cm with compen-sation waler are executable

■ Internal corners and T-junctions with corner panels■Scaffold brackets, push-pull prop connections, crane suspension and wall thickness

compensator are available■Maximum permissible fresh concrete pressure 50 kN/m²■Used with the DW 5 tie system■Powder coating of the elements ensures easy cleaning

■Forming by hand thanks to the low weight■The clip creates flush connections and closes very tightly■Extensions in 30 cm increments■No drilling of additional tie holes required due to the pactical tie point arrangements

in the panels■Maximum permissible fresh concrete pressure 40 kN/m²■High utilization rate due to few panel sizes■Push-pull prop connections and scaffold brackets are available

42 43

VARIO GT 24 Wall FormworkFlexible girder wall formwork, also for high-grade architectural concrete surfaces

VARIO GT 24 standard panels are available already pre-assembled in various sizes. The inexpensive standard panels are designed for a permissible fresh concrete pressure of 60 kN/m² and concrete surfaces without requirements. The technical characteristics correspond to those of the VARIO GT 24 girder wall formwork.When using the VARIO GT 24 girder wall formwork for project-specific, optimally-sized large elements, the following points are freely selectable:

■Girder length and spacing■Waler position, profile and length■Type and size of the formlining■Formlining fixings■Panel widths and heights, position of a possible extension or panel removal■Permissible fresh concrete pressure■Horizontal and vertical tie arrangement

The project-specific constructed 14 m high VARIO elements were designed for a fresh concrete pressure of 150 kN/m² and fitted with large-sized Fin-Ply Maxi formlining sheets.

The VARIO GT 24 formwork with defined formlining joint formation and tie positioning was specially-designed to meet the project requirements and resulted in an excellent architectural concrete finish.

In addition to walls in building construction, VARIO GT 24 elements find many applications in civil engineering, e.g. for a bridge pier as shown here.

With the continuously adjustable panel con-nections, VARIO GT 24 allows the forming of all designs and applications. It can be used as formwork project for industrial and residential construction, bridge abutments or retaining walls, for each ground plan and all heights. Formlining, girder spacing as well as tie positions are freely selectable.

Cost-effectiveVariable arrangement of formwork girders and walersAdaptableTie positioning and joint pattern design according to planning requirementsWell thought-outElongated hole in walers and couplings allow continuous compensation; the panel connection is flush, aligned and tight

■Flexible panel widths according to the length of the SRZ / SRU steel walers■Flexibility regarding the height of the panels which is determined by the

GT 24 girder length (standard lengths 0.90 m to 6.00 m in 30 cm increments; special lengths up to 17.80 m)

■Project-related planning and mounted with regard to the required fresh concrete pressure

■Use of the rigid GT 24 formwork girder leads to a minimization of the number of waler lines and tie points

■Elongated holes in the steel walers and panel couplings allow 100 % tension and compression-proof panel connections resulting in tight panel joints

■Tie positions can be adjusted according to project requirements

Wall Formwork

50 51

Column Formwork

Key criteria when selecting a column formwork

■Dimensions and cross-section of the column to be formed

■Resulting fresh concrete pressure■Requirements on the concrete surface■Required construction time■Available crane capacities

Fast concreting with comparatively small column cross-sections leads to a high fresh concrete pressure on the formwork. Therefore, the joints in particular are to be formed very carefully in order to avoid leakage problems.

Column formwork is comprised of panel formwork elements or based on individual formwork girders. In addition, for particularly high demands on the pouring rate, even-ness and concrete surfaces, steel formwork is also available.

The quick and easy adjustment of the cross-section and height with the least possible number of system components is an important criterion for the versatility of a column formwork. Furthermore, high demands are often placed on the concrete surface. As conventional fixing of the form-work results in impressions of screws and nails being left in the concrete, systems were also developed that allow flawless surfaces to be realized.

Kapitel

54 55

Column FormworkVARIO GT 24 Column FormworkAll heights, all cross-sections, regardless whether square or rectangular-shaped

LICO Column FormworkLightweight column formwork for cost-effective forming by hand

With its low individual element weights, PERI LICO is ideal for assembling and dismantling by hand, and ensures that crane non-availability is not a problem at all.

Practice-orientedPractical details simplify the use and reduce shuttering timesFlexibleOnly 3 different element heights cover all required concreting heightsCombinableCross-sections in 5 cm increments up to 60 cm x 60 cm, square or rectangular-shaped

The LICO column tie bolts and nuts are permanently attached to all panels and cannot be lost.

With additional centrally-arranged ties, cross-sections of up to 60 cm x 130 cm can be formed.

■Lightweight column formwork for forming without a crane■For square and rectangular column cross-sections in 5 cm increments

from 20 cm x 20 cm to 60 cm x 60 cm; over 60 cm with additional ties■Height increments of 50 cm with 3 different element heights

(0.50 cm / 1.00 m / 3.00 m)■Can be extended up to 4.50 m■ Maximum permissible fresh concrete pressure 80 kN/m²■Eye bolts on all elements serve as load-bearing points for moving with

the crane as well as for element connections when extending■Chamfer strip is simply mounted on the panel■Powder-coated frame makes cleaning easy

■Complete formwork unit, foldable, connected to one another

■Rectangular or square cross-sections in 5 cm increments from 20 cm x 20 cm to 120 cm x 120 cm

■Permissible fresh concrete pressure 100 kN/m²

■Excellent concrete surface quality thanks to high-grade formlining

PERI VARIO QUATTRO is extremely cost-effective as it can be moved as a complete unit in one crane lift and provides excellent architectural concrete finishes with sharp or chamfered edges.

User-friendlyClosed in a few simple steps and re-opened after concreting has taken placeVariableCross-sections in 5 cm increments up to 120 cm x 120 cm, square or rectangular-shapedSafe and reliableConcreting platform and access ladder with ladder safety cage

■Rectangular and square cross-sections, continuously adjustable up to 80 cm x 120 cm

■Permissible fresh concrete pressure 100 kN/m²

■Construction with VARIO standard components as well as wedges and tie yokes

■Free choice of formlining

VARIO QUATTRO Column FormworkFor large cross-sections and architectural concrete surfaces

With the PERI VARIO GT 24 column form-work, a very wide range of cross-section dimensions and concreting heights can be shuttered without any time-consuming adjustment work.

Continuously variableColumn cross-sections up to 80 x 120 cmStandardizedOnly 2 ties per waler position from the VARIO programmeRobustDesigned for fresh concrete pressure 100 kN/m², adaptable to suit higher concrete pressures

76 77

Shoring SystemsPERI UP Rosett Flex ShoringThe maximum level of flexibility in shoring solutions

■As free-standing tower in accord-ance with the type test up to 8.39 m, restrained at the top up to a height of 21.89 m (22.34 m with spindle extension)

■As shoring tower with additional frames or framework unit for high vertical and/or horizontal loads

■Project-specific planning as spatial load-bearing structure for virtually all geometries and loads

PERI UP Rosett Flex is the universal modu-lar scaffolding for a wide range of tasks. It makes shoring assemblies with lightweight scaffold materials extremely cost-effective. The system grid dimensions of 25 cm and 50 cm allows optimum adaptation to differ-ent geometries and loads.

VariableFrom shoring towers to complex spatial load-bearing structures, adaptable to suit almost all geometries and loadsModularExtremely flexible in all three dimensions through the uniform grid size

In areas of load concentrations, standards are bundled together with short 25 cm ledgers.

Thanks to the modular design, the scaffold can be optimally adapted to suit all loads.

Due to the low number of different individual compo-nents, PERI UP shoring towers can be quickly assem-bled. Decking levels can be integrated as needed.

PERI UP shoring towers have been type-tested for heights of up to 21.89 m; up to two additional frames can be attached. A third assembly variant is the framework unit; these are based on shoring towers which are connected in one direction and thus configured as one segment.

Dimensionally stableCan be moved in large units due to the high rigidity of the ledger connectionsCompatibleCoordinated with PERI formwork systems for optimized transfer of loads

8180

Selection criteria for a system for erecting working scaffolds

■Area of application and required working area

■Required load-bearing capacity■Boundary conditions, e.g. assembly

area, spatial conditions or possibilities of crane use

■Required geometry, also including openings and passages for material transport

■Available time window for assembly, dismantling and use

■Safety requirements regarding assem-bly and dismantling as well as scaffold utilization

Working scaffolds are temporary struc-tures which serve to create higher-posi-tioned working areas for construction site activities, on buildings or at an industrial facility. In addition, the scaf-folding must ensure that all working areas can be safely reached.

Originally characterized by timber and rope connections, the scaffolding sector has been dominated for many years now by the use of modular systems made of metallic materials. They provide shorter installation times, flexibility for geometrical adjust-ments as well as a high load-bearing capaci-ty and safety for both operators and users.

Country-specific standards and laws con-cerning occupational health and safety regulate the requirements placed on the scaffolding regarding safer erection, brac-ing, anchoring and sufficient load-bearing capacity – depending on the application.

On construction sites, mainly reinforcement scaffolding along with working platforms are used whilst narrow facade scaffolds find use on the front of buildings. Industry scaffolding serves as access and working platforms in plant construction.

Working Scaffold

82 83

PERI UP T 72 / T 104 Frame ScaffoldingThe facade scaffolding which is characterized through safety integrated in the system

Working Scaffold

■Facade scaffolding as working and safety scaffold■Used as working scaffold in Load Class 1 to 4 according to DIN EN 12811-1

(0.75 kN/m² up to 3.00 kN/m²) and as safety scaffold according to DIN 4420-1 (safety scaffolds and roof safety scaffolds for fall heights up to 2.00 m)

■System-integrated collective safety through assembly with the guardrail in advance■Fast assembly with few lightweight individual components without tools■Reduced walking distances and simple procedures■Fast opening and closing of scaffold bays■ "One-man assembly" up to working heights of 6.50 m■Extendable to 104 cm width, up to Load Class 6 with 2.50 m bay width

The PERI UP scaffolding with T-frames ideally combine safety and cost-effectiveness. The scaffolder can work safely and quickly with the help of the integrated collective fall protection on each assembly level – without rope protection: the guardrail for the next scaffold bay is mounted without any addi-tional parts with the T-frame.

■PERI UP T 72 System width 72 cm Decking area width 64 cm Load Classes 1 to 4

■PERI UP T 104 System width 104 cm Decking area width 96 cm Load Classes 1 to 6

SafeCollective fall protection without additional components through the system-related assembly method with the guardrail in advanceLightweightEasy to handle components: the T 72 T-frame weighs, for example, only 14 kgSecureAfter the deck has been placed and moved sideways, the integrated lock against lift off is immediately securedProtectiveReliable side protection - inside and outside

With the integrated lock against lift off, the deck is immediately secured after being placed in position and moved sideways.

The PERI UP facade scaffolding with the T-frame:for safe erection of working scaffolds in everyday facade scaffolding assembly.

The design with the open frame construction provides lightweight and easy-to-handle individual components for fast and fatigue-free working operations.

The scaffolder can work safely and quickly due to the collective fall protection which is integrated in the system. The guardrail for the next scaffold bay is mounted without any additional parts with the T-frame.

The inner guardrail is mounted to the available labyrinth finger, losable small parts are not required.

After assembly, the decks can also be removed and re-installed according to plan.

86 87

PERI UP Rosett Scaffold UnitsDifferent applications – simple and easy implementation using the modular design principle

Working Scaffold

■Used as working scaffold in Scaffold Groups 1-3 according to DIN 4420-1 or Load Classes 1-3 according to EN 12811-1 (0.75 – 2.00 kN/m²)

■Fulfils wind load requirements according to DIN EN 1004 and DIN EN 12811■System widths 72 cm and 104 cm■Base width 150 cm or 250 cm■Maximum standing height 6.60 m (with base width 150 cm) or 10.80 m (base

width 250 cm)■Crane-moveable units through extremely tight connections

■Maximum height of the top deck level in the inner area 6.30 m (1.50 m width) and 10.30 m (3.00 m width)

■Ladder access to decks only 2.00 m high

■Crane-movable units■Ballast for stability is not normally

required■High rigidity guarantees stable

assembly workplaces, also at great heights

■Maximum load-bearing capacity 6.00 kN/m²

Reinforcement Scaffold

As a special form of facade scaffolding, the reinforcement scaffold is characterized by the fact that no anchors are required. With standing heights of up to 10.80 m (5 levels) and with a length of up to 9.00 m (3 bays).

StableWithout anchors – without ballast in front of formwork and wallsPlanned in advanceFast calculation of material requirements thanks to the modular design principleQuick and efficientComplete units can be moved due to the extremely tight connections

Working Platforms

With PERI UP Rosett working platforms, each level can be completely decked out. With standing heights from 2.30 m to 10.30 m access is provided by means of access decks in the intermediate levels.

VariableAdaptable in 50 cm increments for ground plans of 150 cm x 200 cm up to 300 cm x 300 cm – easy to extend thanks to the kit principleCost-effectiveFull width platforms are only installed at heights where work is actually being carried outMovableMovable by crane thanks to the tension-proof connection of the legs, can also be moved by hand using castors

Work scaffolding, such as reinforcement scaffold and platforms, can be assembled using the deck-ledger variant UDS-UHD or the deck-ledger system UDI-UH. An overall view of all the application possibilities of the two variants along with numerous references are featured in the PERI scaffolding technology handbook.

PERI UP Rosett as reinforcement scaffold: ballast is not required as long as the scaffolding is positioned in front of a wall or formwork, and can be supported by this.

The modular design principle of the PERI UP Rosett working platforms allows extensions of required levels to be easily carried out.

High load-bearing capacity as well as fast and easy assembly characterize the UDS steel decking which, after being mounted and pushed into position, is secured immediately against lifting through the decking transom profile.

The modular structure and the 25 cm grid dimen-sions of the PERI UP Rosett Flex system with the UDI decking provide even more flexibility. The indi-vidual deck is secured against lifting immediately after being installed.

88 89

PERI UP Rosett Flex Modular ScaffoldingExtremely flexible work scaffold for a wide range of applications

Working Scaffold

■Modular scaffolding for erecting complex work scaffolds■Uniform length and width grid arrangement of the standards, ledgers and decks of 25 cm or 50 cm■Scaffold bay lengths: 50 cm, 75 cm, 100 cm, 125 cm, 150 cm, 200 cm, 250 cm, 300 cm■Easy and safe assembly thanks to the “Gravity Lock”: by inserting the wedge head into the rosette,

the wedge drops by force of gravity into the hole and then locks■Rigidity of the ledger connections allows high leg loads which means fewer diagonals are required■High level of working safety thanks to the end-to-end guardrails and toe boards

PERI UP Rosett Flex is a highly flexible sys-tem scaffold that leaves almost no request unfulfilled especially for industrial applica-tions. This allows almost any adjustments to be made to suit local site conditions – and also fulfils the highest requirements regarding occupational safety for the work-ing areas to be realized.

PERI UP Rosett Flex has a grid system of 25 cm and 50 cm. The wide range of ledgers with lengths starting from 25 cm allow deck-ing to change direction during installation and therefore ensure maximum adaptability to suit project-specific geometries.

Decking areas can be completely covered, plant elements as well as other constructions can be built around using system components.

Maximum adaptability, high level of safety and fast assembly – all this makes PERI UP Rosett Flex the ideal system for use in industry.

Toe boards with lengths in the modular dimensions limit the decking areas.

Safe working conditionsWorking platforms are completely covered without any gaps and simple conversions are made to accommodate any obstructionsNon-slipThe perforated surface of the decking provides a high level of safetyEasy to installQuickly and safely mounted with the “gravity lock” and self-locking decksHigh load-bearing capacityDue to the special node rigidity and enormous loadability of the connection

90 91

Selection criteria for a system for realizing the means of access

■Circle of users■Requirements on flight width, load and

intermediate landings■Required height of the access■Available time frame for assembly and

dismantling■Prevailing safety regulations for assembly

and dismantling as well as use

System scaffolding also provides solu-tions for temporary access to working levels at different heights. The range of applications extends from stairs with only a few steps through to stair towers over 90 m high.

The intended use of an access determines the circle of users and thus the require-ments regarding the geometry and loads. An important criterion is the differentiation between access for construction work and access facilities in public areas.

Access to working areas at great heights on construction sites is used by personnel equipped with appropriate protective equip-ment. For the public areas, however, wide and convenient to use stairs are to be installed, also for larger crowds of people.

Accordingly, specific requirements for flight widths, the execution of intermediate land-ings and the safety equipment – among other things – are to be taken into consider-ation.

Access

8

10

1415

23

31

35

3739 40

43

44

45

47

50 51

585457

5659 55

64

63

65

7

25

26

66

27

36

49

61

62

2

1

3

4

5

6

9

11

12

1316

17

18

19

20

22

21

24

2829

30

32

33

34

38

41

42

46

48

52

44

53

60

02 PERI S.A.S. 77109 Meaux Cedex peri.sas@peri.fr www.peri.fr

03 PERI AG 8472 Ohringen info@peri.ch www.peri.ch

04 PERI S.A.U. 28110 Algete - Madrid info@peri.es www.peri.es

05 N.V. PERI S.A. 1840 Londerzeel info@peri.be www.peri.be

06 PERI Holding B.V. 5480 AH-Schijndel info@peri.nl www.peri.nl

07 PERI Formwork Systems, Inc. Elkridge, MD 21075 info@peri-usa.com www.peri-usa.com

08 PT Beton Perkasa Wijaksana Jakarta 10210 bpw@betonperkasa.com www.peri.com

09 PERI S.p.A. 20060 Basiano info@peri.it www.peri.it

10 PERI Japan K.K. Tokyo 103-0015 info@perijapan.jp www.perijapan.jp

11 PERI Ltd. Rugby, CV23 0AN info@peri.ltd.uk www.peri.ltd.uk

12 PERI Kalip ve Iskeleleri Sanayi ve Ticaret Ltd. Esenyurt / İstanbul 34510 info@peri.com.tr www.peri.com.tr

13 PERI Kft. 1181 Budapest info@peri.hu www.peri.hu

14 PERI Formwork Malaysia Sdn. Bhd. 43300 Seri Kembangan, Selangor Darul Ehsan info@perimalaysia.com www.perimalaysia.com

15 PERI ASIA Pte. Ltd Singapore 387355 pha@periasia.com www.periasia.com

16 PERI Ges.mbH 3134 Nußdorf ob der Traisen office@peri.at www.peri.at

17 PERI spol. S r.o. 252 42 Jesenice u Prahy info@peri.cz www.peri.cz

18 PERI Danmark A/S 2670 Greve peri@peri.dk www.peri.dk

19 PERI Suomi Ltd. Oy 05460 Hyvinkää info@perisuomi.fi www.perisuomi.fi

20 PERI Norge AS 3036 Drammen info@peri.no www.peri.no

21 PERI Polska Sp. z o.o. 05-860 Płochocin info@peri.com.pl www.peri.com.pl

22 PERIform Sverige AB 30262 Halmstad peri@periform.se www.periform.se

23 PERI (Korea) Ltd. Seoul 135-936 info@perikorea.com www.perikorea.com

24 Pericofragens Lda. 2790-326 Queijas info@peri.pt www.peri.pt

25 PERI S.A. B1625GPA Escobar – Bs. As. info@peri.com.ar www.peri.com.ar

26 PERI Formas e Escoramentos Ltda. Vargem Grande Paulista – SP info@peribrasil.com.br www.peribrasil.com.br

27 PERI Chile Ltda. Colina, Santiago de Chile perichile@peri.cl www.peri.cl

28 PERI România SRL 077015 Baloteşti info@peri.ro www.peri.ro

29 PERI Agency 2000 Maribor peri.slo@triera.net www.peri.com

30 PERI spol. s. r.o. 903 01 Senec info@peri.sk www.peri.sk

31 PERI Australia Pty. Ltd. Glendenning NSW 2761 info@periaus.com.au www.periaus.com.au

32 PERI AS 76406 Saku vald Harjumaa peri@peri.ee www.peri.ee

33 PERI Hellas Solely Owned Ltd. 194 00 Koropi info@perihellas.gr www.perihellas.gr

34 PERI SIA 2118 Salaspils novads, Rigas rajons info@peri-latvija.lv www.peri-latvija.lv

35 PERI (L.L.C.) Dubai U.A.E. perillc@perime.com www.perime.com

36 PERI Formwork Systems, Inc. Bolton, ON – L7E 1K1 info@peri.ca www.peri.ca

37 PERI Representative Office 90416 – Jdeideh lebanon@peri.de www.peri.com

38 PERI UAB 02300 Vilnius info@peri.lt www.peri.lt

39 PERI S.A.U. Tanger peri25@menara.ma www.peri.com

40 PERI Formwork Engineering Ltd. Rosh Ha‘ayin, 48104 info@peri.co.il www.peri.co.il

41 PERI Bulgaria EOOD 1839 Sofia peri.bulgaria@peri.bg www.peri.bg

42 Armar ehf. 220 Hafnarfjörður armar@armar.is www.armar.is

43 TOO PERI Kazakhstan 050000 Almaty peri@peri.kz www.peri.kz

44 OOO PERI 142407, Noginsk District moscow@peri.ru www.peri.ru

45 PERI (Pty) Ltd 7600 Stellenbosch info@peri.co.za www.peri.co.za

46 PERI Ukraina 07400 Brovary peri@peri.ua www.peri.ua

47 Egypt Branch Office 11341 Nasr City /Cairo info@peri.com.eg www.peri.com.eg

48 PERI – Oplate d.o.o. 22310 Šimanovci office@peri.rs www.peri.rs

49 PERI Cimbras y Andamios, S.A. de C.V. Estado de México, Huehuetoca info@peri.com.mx www.peri.com.mx

50 PERI Repesentative Office Baku peribaku@peri.com.tr www.peri.com.tr

51 PERI Kalıp ve İskeleleri Aşgabat ahmet.kadioglu@peri.com.tr www.peri.com.tr

52 IOOO PERI Belarus 220100 Minsk info@peri.by www.peri.by

53 PERI oplate i skele d.o.o. 10 250 Luöko-Zagreb info@peri.com.hr www.peri.com.hr

54 PERI (India) Pvt Ltd Mumbai – 400064 info@peri.in www.peri.in

55 PERI GmbH - Jordan 11947 Amman jordan@peri.com www.peri.com

56 PERI Kuwait Company WLL 13011 Kuwait kuwait@peri.com www.peri.com

57 PERI Saudi Arabia Com. Ltd. 21463 Jeddah info@peri.com.sa www.peri.com.sa

58 PERI Qatar LLC P.O.Box: 31295 - Doha info@periqatar.com www.periqatar.com

59 Sarl PERI Kouba 16092, Alger info@peri.com www.peri.com

60 PERI formwork and scaffolding Sh.p.k. Tirane erti.hasanaj@peri.com.tr www.peri.com.tr

61 PERI Peruana S.A.C. Villa El Salvador, Lima contacto@peri.com.pe www.peri.com.pe

62 PERI Panama Inc. 0832-00155 Panama City info@peri.com.pa www.peri.com.pa

63 Pericofragens, Lda. Luanda renato.portugal@peri.pt www.peri.pt

64 Heights Access Nigeria Ltd. Victoria Island, Lagos info@heightsaccessng.com www. heightsaccessng.com 65 PERI (L.L.C.) Muscat perimct@perime.com www.perime.com

66 PERI S.A.S. Colombia Chapinero Alto, Bogotá peri.colombia@peri.com.co www.peri.com.co

01

302 303

Germany PERI GmbH Rudolf-Diesel-Strasse 89264 Weissenhorn info@peri.com www.peri.com

France

Switzerland

Spain

Belgium/Luxembourg

Netherlands

USA

Indonesia

Italy

Japan

United Kingdom/Ireland

Turkey

Hungary

Malaysia

Singapore

Austria

Czech Republic

Denmark

Finland

Norway

Poland

Sweden

Korea

Portugal

Argentina

Brazil

Chile

Romania

Slovania

Slovakia

Australia

Estonia

Greece

Latvia

United Arab Emirates

Canada

Lebanon

Lithuania

Morocco

Israel

Bulgaria

Iceland

Kazakhstan

Russian Federation

South Africa

Ukraine

Egypt

Serbia

Mexico

Azerbaijan

Turkmenistan

Belorussia

Croatia

India

Jordan

Kuwait

Saudi Arabia

Qatar

Algeria

Albania

Peru

Panama

Angola

Nigeria

Oman

Colombia

PERI International

SCAFFOLDING & FORMWORK ENGINEERING

PT BETON PERKASA WIJAKSANAJalan Penjernihan No. 40,Jakarta10210Phone +62-21 - 571 2644bpw@betonperkasa.comwww. betonperkasa.com