1 

 

A/P Chua Leok Poh

Publication Listing

International Referee Journal:

1. L.P. Chua and R.A. Antonia, 1986, The turbulent interaction region of a circular jet. International Communication in Heat and Mass Transfer, 13, pp. 545-558. 2. L.W.B. Browne, R.A. Antonia, and L.P. Chua, 1989, Calibration of X-probes for turbulent flow measurements, Experiments in Fluids, 2, pp. 201-208. 3. L.W.B. Browne, R.A. Antonia, and L.P. Chua, 1989, Velocity vector cone angle in turbulent flows, Experiments in Fluids, 8, pp. 13-16. 4. L.P. Chua and R.A. Antonia, 1989, Flow reversal and intermittency of a turbulent jet, AIAA Journal, November, Vol. 27, No. 11, pp. 1494-1499. 5. L.P. Chua and R.A. Antonia, 1990, Turbulent Prandtl number in a circular jet, International Journal of Heat and Mass Transfer, Vol. 33, No. 2, pp 331-339.   6. L.P. Chua and R.A. Antonia, 1991, Spectral analogy between temperature variance and turbulent energy in a circular jet, International Communication in Heat and Mass Transfer, Vol. 18, No. 4, pp 569-579. (Q1) 7. L.P. Chua and R.A. Antonia, 1992, Spatial organisation of large structures in the near-field of a circular jet, Fluid Dynamics Research, 9, pp 59-71. 8. L.P. Chua and E.Y. Goh, 1994, Design and eliminating the buoyancy effect of a heated circular jet, International Communication in Heat and Mass Transfer, Vol. 21, No. 5, pp. 629-639. 9. S.C.M. Yu and L.P. Chua, 1994, Construction of a smoke wire rig for the visualization of complex three-dimensional flow, International Journal of Engineering Education Vol. 9, No. 6, pp. 467-476. 10. K.F. Choo, C.Y. Liu and L.P. Chua, 1996, Construct and test a bench top multi-purpose wind tunnel, International Journal of Mechanical Engineering Education, Vol. 24, No. 4, pp. 243-255. 11. E.Y. Goh, and L.P. Chua, 1996, Effects of Adverse pressure gradient on Reynolds-stress turbulence model, International Communication in Heat and Mass Transfer, Vol. 23, No. 4, pp. 505-516. (Q1) 12. L.P. Chua, S.C.M. Yu, S.H. Winoto and D.A. Shah, 1997, Measurement of Round Jet: Prediction of valvular regurgitation and its lesion size, Journal of Mechanical Engineering Research and Developments, Vol. 19-20, pp. 1-12. 13. L.P. Chua, S.C.M. Yu, H.L. Leo, 1998, Performance of enlarged blood pump models with five different impellers, Critical Review TM in Biomedical Engineering, Vol. 26, No. 5 & 6, pp. 323. 14. L.P. Chua, S.C.M. Yu, H.L. Leo, 1998, Measurements of enlarged blood pump models using laser Doppler anemometer, Critical Review TM in Biomedical Engineering, Vol. 26, No. 5 & 6, pp. 323-324. 15. L.P. Chua, C.Y. Liu and W.K. Chan, 1998, Measurements of a step cylinder, International Communication in Heat and Mass Transfer, Vol. 25, No. 2, pp. 205-215.

2 

 

16. L.P. Chua, S. C. Tung and S.C.M. Yu, 1998, Jet measurements in valvular lesion size and regurgitation prediction, International Communication in Heat and Mass Transfer, Vol. 25, No. 7, pp. 938-948. 17. L.P. Chua, T. Akamatsu and W.K. Chan, 1998, Preliminary measurements of an enlarged blood pump model, International Communication in Heat and Mass Transfer, Vol. 25, No. 8, pp. 1055-1064. 18. S.C.M. Yu, W. K. Chan, L.P. Chua, F. Hui and S. Xu, 1998, Pulsatile flow characteristics in saccular fusiform and stented Aneurysms, Automedica : An International Journal of Biomedical Engineering & Physics, Informatics and Technology, Vol. 17, pp. 213-236. 19. L.P. Chua and A. C. Lua, 1998, Measurements of a Confined Jet, Physics of Fluids, Vol. 10, No. 12, pp. 3137-3144. 20. L.P. Chua, S. C. Tung and W.K. Chan, 1999, Preliminary measurements of Wall Shear Stress, International Communication in Heat and Mass Transfer, Vol. 26, No. 1, pp. 65-74. 21. S.C.M. Yu, T.H. Yip and L.P. Chua, 1999, Visualization of flows behind the lobed forced mixers using the smoke-wire technique, Journal of Visualization, Vol. 1 No. 4, pp. 397-404.   22. L.P. Chua, S.C.M. Yu, H.L. Leo* and W.K. Chan, 1999, Comparison of flow characteristics of Enlarged Blood Pump Models with Different Impeller Design, International Comm. in Heat and Mass Transfer, Vol. 26, No. 3, pp. 369-378. 23. S.C.M. Yu, W.K. Chan, B.T.H. Ng and L.P. Chua, 1999, A numerical investigation on the steady and pulsatile flow characteristics in axi-symmetric abdominal aortic aneurysm models with some experimental evaluation, J. Medical Engineering and Technology, Vol. 23, Issue 6, pp. 228-239. 24. S.C.M. Yu, L.P. Chua and R. E. K. Goh, 1999, The near-field flow characteristics of some wall mounted mixing tabs, Aeronautical Journal, Vol. 103 (1023), pp. 253-256.

25. L.P. Chua, S.C.M. Yu, H.L. Leo, 2000, Performance of enlarged blood pump models with five different impellers, Critical Review TM in Biomedical Engineering, Vol. 28, Issue 1 & 2, pp. 129-134. 26. L.P. Chua, S.C.M. Yu, H.L. Leo, 2000, Measurements of enlarged blood pump models using laser Doppler anemometer, Critical Review TM in Biomedical Engineering, Vol. 28, Issue 1 & 2, pp. 135-140. 27. L.P. Chua, S.C.M. Yu and W.P. Tam, 2000, PIV Measurements of proximal models with different anastomotic angles, International Communication in Heat and Mass Transfer, Vol. 27, No. 4, pp. 517-526. 28. L.P. Chua, S.C.M. Yu and H-S. Li, 2000, Flow visualization and preliminary measurements of a confined jet with and without target, International Communication in Heat and Mass Transfer, Vol. 27 No.2, pp. 191-200. 29. L.P. Chua, H-S. Li and H. Zhang*, 2000, Calibration of hot wire for low speed measurements, International Communication in Heat and Mass Transfer, Vol. 27, No. 4, pp. 507-515. 30. S.C.M. Yu, B.T.H. Ng, W.K. Chan and L.P. Chua, 2000, The Flow Patterns within the impeller passages of a centrifugal blood pump model, Medical Engineering & Physics, Vol. 22, No. 6, pp. 381-383. 31. L.P. Chua, K.S. Ong* and S.C.M. Yu, 2000, Preliminary Measurements of gap velocity of a Blood Pump Model, International Comm. in Heat and Mass Transfer, Vol. 27, No. 8, pp. 1111-1120. 32. L.P. Chua, Y.F. Li* and S.C.M. Yu, 2000, Self-preservation of a heated square jet, International Comm. in Heat and Mass Transfer, Vol. 27, No. 8, pp. 1121-1130.

3 

 

33. L.P. Chua and T. Akamatsu, 2000, Measurements of Gap Pressure and Wall Shear Stress of a blood pump model, Medical Engineering & Physics, Vol. 22, No. 3, pp. 175-188. 34. A.C. Lua, K. Shi and L.P. Chua, 2001, Proportional assist ventilation system based on proportional solenoid valve control, Medical Engineering & Physics, Vol. 23 (6), pp. 381-389. 35. S.C.M. Yu, L.P. Chua and H.L. Leo*, 2001, The angle-resolved velocity measurements in the impeller passages of a model bio-centrifugal pump, Proceedings of Institute Mech. E, Part C, Journal of Mechanical Engg. Sci., U. K., Vol. 215, pp. 547-568. 36. S.C.M. Yu, P. K. Koh and L.P. Chua, 2001, An experimental Investigation of two-stream mixing flow with a single delta tab, International J. of Heat and Fluid Flow, Vol. 22, pp. 62-71. 37. L.P. Chua, S.C.M. Yu and Q. Xue*, 2001, Scaling Laws for wall shear stress through stenoses under steady and pulsatile flow conditions, Journal of Engineering in Medicine, Proceedings of the Institution of Mechanical Engineers Part H, Vol. 215, pp. 503-514.

38. W.K. Chan, S.C.M. Yu, L.P. Chua, and Y.W. Wong, 2001, Visualization of relative flow patterns in centrifugal blood pump, KSME International Journal, Vol. 15, No. 12, pp. 1869-1975. 39. L. Lu*, L.P. Chua, and S.C.M. Yu, 2002, Simulation of steady flows in abdominal aortic aneurysm models, Journal of Biomechanics, Vol. 17, No. 3, pp. 159-164. 40. W.K. Chan, Y.W. Wong S.C.M. Yu and L.P. Chua, 2002, A computational study of the effects of inlet guide vanes (IGV) on the performance of a centrifugal blood pump, Artificial Organs, Vol. 26, Issue 6; pp. 534-542. 41. L.P. Chua, K.S. Ong*, S.C.M. Yu, W.K. Chan and Y.W. Wong 2002, Gap Velocity measurements of a blood Pump Model, Artificial Organ, Vol. 26, Issue 8, pp. 682-694.

42. T. Zhou, R.A. Antonia and L.P. Chua, 2002, Performance of a probe for measuring turbulent energy and temperature dissipation rates, Experiments In Fluids, 33, pp. 334-345. 43. H. Zhang*, X.Y. Huang, H. S. Li and L.P. Chua, 2002, Flow patterns and heat transfer enhancement in low-Reynolds-Rayleigh-Number channel flow, Applied Thermal Engineering, Vol. 22, pp. 1277-1288. 44. Y.W. Wong, W.K. Chan, S.C.M. Yu and L.P. Chua, 2002, Effects of scaling on centrifugal blood pumps, Artificial Organs, Vol. 26, Issue 11, pp. 998-1001.

45. W.K. Chan, Y.W. Wong, Y Ding, L.P. Chua and S.C.M. Yu, 2002, Numerical Investigation of the effect of Blade geometry on blood trauma in a centrifugal blood pump, Artificial Organs, Vol. 26, Issue 9, pp. 785-793. 46. T. Zhou, Y. Zhou, M.W. Yiu and L.P. Chua, 2003, Three-dimensional vorticity in a turbulent cylinder wake, Experiments in Fluids, Vol. 35, pp. 459-471.   47. L.P. Chua, S.C.M. Yu and X.K. Wang*, 2003, Flow visualization and measurements of a square jet with mixing tabs, Experimental Thermal and Fluid Science, Vol. 27, No. 6, pp. 731-744.

48. X.K. Wang*, L.P. Chua and S.C.M. Yu, 2003, On the near-field of a square jet with vortex-generating tabs, Fluid Dynamics Research, Vol. 32, No. 3, pp. 99-117.

4 

 

49. L.P. Chua, J. Zhang* and T. Zhou, 2003, Numerical study on the steady flow characteristics of proximal anastomotic model, International Comm. in Heat and Mass Transfer, Vol. 30 No. 7, pp. 945-954. 50. L.P. Chua, K.S. Ong*, S.C.M. Yu, and T. Zhou, 2003, Leakage flow measurements in a bio-centrifugal ventricular assist device model, Artificial Organ, Vol. 27, No. 10, pp. 942-959.

51. L.P. Chua, Y.F. Li* and T. Zhou, 2004, Measurements of a heated square jet, AIAA Journal , Vol.

42, No. 3, pp. 578-588. 52. X.K. Wang*, S.C.M. Yu and L.P. Chua, 2004, Effects of delta tabs on axis-switching of a coaxial square jet, AIAA J. of Propulsion and Power, 20(3), pp. 533-541. 53. S.C.M. Yu, L.P. Chua and X.K. Wang*, 2004, Measurements in the near field of a confined coaxial square jet, AIAA J., Vol. 52, No. 5, pp. 965-972. 54. L.P. Chua, K.S. Ong*, S.C.M. Yu and T. Zhou, 2004, Leakage flow rate and wall shear stress distributions in a bio-centrifugal ventricular assist device, ASAIO J., Vol. 50(6), Nov/Dec., pp. 530-536. 55. L.P. Chua, J. Zhang* and T. Zhou, 2005, Numerical study of a complete anastomosis model for the coronary artery bypass, International Comm. in Heat and Mass Transfer, Vol. 32, pp. 473-482. 56. L.P. Chua, W. Ji* and T. Zhou, 2005, In-virto study on the steady flow characteristics of proximal anastomotic models, International Comm. in Heat and Mass Transfer, Vol. 32, pp. 464-472.

57. T. Zhou, Z. Hao, L.P. Chua and S.C.M. Yu, 2005, Scaling of longitudinal and transverse velocity increments in a cylinder wake, Physical Review E, Vol. 71, 066307, pp. 1-9. 58. L. P. Chua, J.H. Tong* and T. M. Zhou, 2005, Numerical simulation of steady flows in designed sleeve models at distal anastomoses, International Communication of Heat and Mass Transfer, Vol. 32, pp. 707-714.

59. L. P. Chua, G. L. Song*, S.C.M. Yu and T. M. Lim, 2005, Computational fluid dynamics of gap flow in a bio-centrifugal blood pump, Artificial Organ. Vol. 29, pp. 620-628.

60. M. Sankaranarayanan, L.P. Chua, D.N. Ghista, Y.S. Tan, 2005 Computational model of blood flow in the aorto-coronary bypass graft, Bio-Medical Engineering On-line Journal, 4:14, 13 pages.

61. L.P. Chua, J.M. Zhang*, S.C.M. Yu, D.N. Ghista and Y.S. Tan, 2005, Numerical study on the pulsatile flow characteristics of proximal anastomotic model, J. of Engg. in Medicine, Proceedings of the Institution of Mechanical Engineers Part H, Vol. 219, pp 361-379.

62. J.J. Ai, S.C.M. Yu, A.W.K. Law and L.P. Chua, 2005, Vortex dynamics in starting square water jets, Physics of Fluids, 17,014106, pp. 1-12. 63. T. Zhou, R.A. Antonia and L.P. Chua, 2005, Flow and Reynolds number dependencies of one-dimensional vorticity fluctuations, Journal of Turbulence, Vol. 6 (28), pp. 1-17.

64. D.N. Ghista, L. Zhong, , L.P. Chua, E.Y.K. Ng, S.T. Lim, R.S. Tan and T. S-J Chua, 2005,

Systolic modeling of the left ventricle as a mechatronic system: Determination of myocardial fiber’s sarcomere contractile characteristics and new performance indices, Journal of Molecular and Cellular Biomechanics Vol. 2(4), pp. 217-233.

5 

 

65. L. Liu, L.P. Chua and D. N. Ghista, 2006, Conforming radial point interpolation method for spatial shell structures on the stress resultant shell theory, Archive of Applied Mechanics. Vol. 75 (No. 4-5), pp. 248-267.  

66. L. Liu, L.P. Chua and D. N. Ghista, 2006, Element free Galerkin method for static and dynamic analysis of spatial shell structures, Journal of Sound and Vibration, Vol. 295, (1-2), pp. 388-406.

67. T. Zhou, A. Rinoshika (H. Li), Z. Hao, Y. Zhou and L.P. Chua, 2006, Wavelet multi-resolution analysis of the three vorticity components in a turbulent far wake, Physical Review E, 73, 036307-1 to 12. 68. L. Zhong, D.N. Ghista, E.Y.K. Ng and S.T. Lim, R. S. Tan and L.P. Chua, 2006, Explaining left ventricular pressure dynamics in terms of LV passive and active elastances, Proceedings of the Institution of Mechanical Engineers Part H, Vol. 220, pp. 647-655. 69. M. Sankaranarayanan, L.P. Chua, D.N. Ghista and Y.S. Tan, 2006, Flow studies in Three Dimensional Aorto-Right Coronary Bypass graft System, Journal of Medical Engineering & Technology, 30(5), pp. 369-382.

70. M. Sankaranarayanan, D.N. Ghista, L.P. Chua and Y.S. Tan and G Kassab, 2006, Analysis of blood flow in an out-of-plane bypass-graft model, American Journal of Physiology – Heart and Circulatory Physiology, 291(1), H283-H295. 71. R. Mao, S.C.M. Yu and L.P. Chua, 2006, Kelvin-Helmholz and streamwise vortices in the near wake of a single-lobe forced mixer, Journal of Aerospace Engineering, Proceedings of the Institution of Mechanical Engineering Part G, Vol. 220, pp. 279-298. 72. T. Zhou, Z. Hao, L.P. Chua and Y. Zhou, 2006, Comparisons between different approximations to energy dissipation rate in a self-preservation far wake, Physical Review E, Vol. 74, 056308.

73. L. P. Chua, G. L. Song*, T. M. Lim and T. M. Zhou, 2006, Numerical analysis of the inner flow field of a bio-centrifugal blood pump, Artificial Organ, Vol. 30(6), pp. 467-477.

74. L.P. Chua, B.Y. Su*, T.M. Lim and T. M. Zhou, 2007, Numerical simulation of an axial blood pump, Artificial Organs, Vol. 31(11), pp. 560-570. 75. L. Zhong, D.N. Ghista, E.Y.K. Ng, T. Chua, C.N. Lee, S.T. Lim, R.S. Tan and L.P. Chua, 2007, Left ventricular functional indices based on left ventricular elastances and shape factor, Journal of Mechanics in Medicine and Biology, Vol. 7(1), pp. 107-116.

76. L. Liu, L.P. Chua and D. N. Ghista, 2007, Mesh-free radial basis function method for static, free vibration and bucking analysis of shear deformable composite laminates, Journal of Composite Structures, Vol. 78, Issue 1, pp. 58-69.

77. L. Liu, L.P. Chua and D. N. Ghista, 2007, Applications of point interpolation method for spatial

shells structures, Computer Methods in Applied Mechanics and Engineering, Vol. 196, pp. 1633-1647.  

78. L. Zhong, R.S. Tan, D.N. Ghista, E.Y.K. Ng, L.P. Chua and G.S.Kassab, 2007, Validation of a novel noninvasive cardiac index of left ventricular contractility in patients, American Journal of Physiology Heart and Circulation Physiology 292, pp. H2764-2772.

6 

 

79. J.M. Zhang*, L.P. Chua, D.N. Ghista, T.M Zhou and Y.S. Tan, 2008, Validation of numerical simulation with PIV measurements for two anastomosis models, Medical Engineering and Physics, (Med Eng Phys, doi: 1016/j.medengphy.2007.02.004), Vol. 30 (2), pp. 226-247.

80. L.P. Chua, W. Ji*, S.C.M. Yu, T. Zhou and Y.S. Tan, 2008, PIV measurements of three proximal anastomosis models under the pulsatile flow condition, J. of Engg. in Medicine, Proceedings of the Institution of Mechanical Engineers Part H, 222(3), pp. 249-263.

81. L.P. Chua, K.S. Ong* and G.L. Song, 2008, Study of velocity and shear stress distributions in the impeller passages and the volute of a bio-centrifugal ventricular assist device, Artificial Organ, Vol. 32 (5), pp. 376-387. 82. J.M. Zhang*, L.P. Chua, D.N. Ghista, S.C.M. Yu and Y.S. Tan, 2008, Numerical investigation and identification of susceptible site of atherosclerotic lesion formation in a complete coronary artery bypass model, Medical & Biological Engineering & Computing, Vol. 46 (7), pp. 689-699. 83. Z. Hao, T. Zhou, L.P. Chua and S.C.M. Yu, 2008, Approximations to energy and temperature dissipation rates in the far field of a cylinder wake. J. of Experimental Thermal and Fluid Science, 32(3), pp. 791-799.

84. L.P. Chua, W. Ji*, D.N. Ghista, T. Zhou, and Y.S. Tan, 2008, Effect of anastomosis geometry on

hemodynamic performance of CABG: PIV measurements and comparison of two distal anastomosis models. Proceedings of the Institution of Mechanical Engineering Part H, Journal of Engineering in Medicine, 222(3), pp. 249-263.

85. G. L. Song* and L.P. Chua, 2008, Laser Doppler anemometer measurements of the flow in the

impeller blade channels of a centrifugal blood pump, (Win The Hong Kong Institution of Engineers Outstand Paper Award for Young Engineers/Researchers 2008), Transactions of HKIE Special Issue, 15, pp. 11-16.

86. L.P. Chua, K.S. Ong*, G.L. Song and W.F. Ji, 2009, Measurements by LDV in the casing/impeller clearance gap of a bio-centrifugal ventricular assist device model, Artificial Organ, 33, pp. 360-372.

87. R. Mao, S.C.M. Yu, T. Zhou and L.P. Chua, 2009, On the vorticity characteristics of lobe-forced mixer at different configurations, Experiments in Fluids, 46(6) pp. 1049-1066.

88. T. Zhou, Fatin, Y. Zhou, L.P. Chua and L Cheng, 2009, Dependence of the wake on cylinder inclination, Experiments in Fluids, 46(6), pp 1125-1138. 89. T.M. Lim, S.B. Cheng and L.P. Chua, 2009, Parameter estimation and actuator characteristics of hybrid magnetic bearings for axial flow blow pump applications, Artificial Organ, 33(7), pp. 509-531.

90. T.M. Lim, D.S. Zhang, J.J. Yang, S.B. Cheng, S.H. Low L.P. Chua and X.W. Wu, 2009, Design

and parameter estimation of hybrid magnetic bearings for blood pump applications, Mechanical Systems and Signal Processing 23(7), pp.2352-2382.  

91. D.N. Ghista, L. Liu, L.P. Chua, L. Zhong, R.S. Tan, , and Y.S. Tan, 2009, Mechanism of left ventricular pressure increase during isovolumic contraction, and determination of its equivalent myocardial fibers orientation, J. of Mechanics in Medicine and Biology, Special Issue S1, 9, pp. 177-198.

7 

 

92. G.L. Song*, L. P. Chua and T. M. Lim, 2010, Numerical study of a centrifugal blood pump with different impeller blade profiles, ASIAO J. 56, pp. 24-29.

93. G.L. Song*, L. P. Chua and T. M. Lim, 2010, Numerical study of a bio-centrifugal blood pump

with straight impeller blade profiles, Artificial Organs, 34(2), pp.98-104.  

94. F. Kabinejadian*, L.P. Chua, D.N. Ghista and Y.S. Tan, 2010, CABG Models flow simulation study on the effects of valve remnants in the venous graft, Journal of Mechanics in Medicine and Biology, 10(4), pp.593-609.

 

95. F. Kabinejadian*, L.P. Chua, D.N. Ghista and Y.S. Tan, 2010, A novel coronary artery bypass graft (CABG) sequential anastomosis design, Annals of Biomedical Engineering, 38(10), pp. 3135-3150.

    96. B.Y. Su*, L.P. Chua T.M. Lim and T. Zhou, 2010, Evaluation of the impeller shroud performance of an axial flow vertical assist device using computational fluid dynamics, Artificial Organs, 34(9), pp. 745-759.  

    97. M. Sankaranarayanan, D.N. Ghista, L.P. Chua and Y.S. Tan, Sundaravadivelu K. and G Kassab, 2010, Blood flow on out-of-plane aorto-left coronary sequential bypass graft, Computational Cardiovascular Mechanics Modeling and Application in Heart Failure, pp. 277-285.  

    98. B.Y. Su*, L.P. Chua and X.K. Wang, 2012, Validation of an axial flow blood pump computational fluid dynamics results using particle image velocimetry, Artificial Organs 36 (4), pp.359-367.  

99. Z.K. Zhang* and L.P. Chua, 2012, On the mixing in a heated elliptic jet, International Journal of Heat and Mass Transfer, 55 (17‐18), pp. 4566‐4579.   100. Pey, Y.Y., L.P. Chua, and W.L. Siauw, 2012, Stochastic Estimation of Cavity Flow field, in World Academy of Science Engineering and Technology, Issue 71, pp. 983-984.

101. B.Y. Su*, L.P. Chua, and L. Zhong , 2013, Numerical studies of an axial flow blood pump with different diffuser design, Journal of Mechanics in Medicine and Biology, 13, No. 3, 16 pages. 150029.

102. Y.Y. Pey*, L.P. Chua and W.L. Siauw, 2014, Effects of trailing edge on cavity flow structures

and pressure drag, Journal of Heat and Fluid Flow, Vol. 45, Issue 1, pp. 53-71. 103. J.M. Zhang*, L. Zhong, J.S. Yap, P.L. Tham, M. Wan, B.Y. Su, L.P. Chua, D.N. Ghista and R.S.

Tan, 2014, Perspective on CFD studies of coronary artery disease lesions and hemodynamics, International J. for Numerical methods in Biomedical Engg., Vol. 30, Issue 6, pp.659-680. (Q2)

104. Y.Y. Pey* and L.P. Chua, 2014, Effects of trailing wall modification on cavity wall pressure, Experimental Thermal and Fluid Science, Vol. 57, pp. 250-260.

105. F. Kabinejadian*, D.N. Ghista, B.Y. Su, M.K. Nezhadian, L.P. Chua, J.H. Yeo and H.L. Leo,

2014, In vitro measurements of velocity and wall shear stress in a novel sequential anastomotic grafting design model under pulsatile flow conditions, Medical Engineering & Physics Vol.36, Issue 10, pp. 1233-1245.

8 

 

106. H.M. Lee, L.P. Chua and Y.M. Lam, 2012, Design of a 5kW horizontal axis wind turbine using

experimental and numerical method, Journal of Wind Engineering and Industrial Aerodynamics (Submitted)

107. Z.K. Zhang and L.P. Chua, 2013, Turbulent Prandtl number in a heated Elliptic Jet, International Journal of Heat and Mass Transfer (Going to submit)

International Conference Papers

1. S.H.Winoto, D.A. Shah, S.G. Ang and L.P. Chua, 1991, Prediction of orifice size from velocity measurements within the issuing free jets. FED-Vol. 107, pp 47-52. General topics in Fluids Engineering edited by F.M. White and K. Kamemoto. The First ASME-JSME Fluids Engineering Conference, Portland, Oregon, USA.

2. L.P. Chua and R.A. Antonia, 1992, Modes of organised motion in the near-field of a circular jet. Proceedings of the fifth Asian Congress of Fluid Mechanics, Korea Advanced Institute of Science and Technology, Taejon, Korea. pp 1099-1102.

3. L.P. Chua, S.M. Kan, S.C.M. Yu, S.H. Winoto and D.A. Shah, 1992, Prediction of nozzle size with initial laminar conditions for heart valve regurgitation. The 7th International Conference on BioMedical Engineering, Singapore, pp 182-184.

4. L.P. Chua, S.H. Lim, S.C.M. Yu and H.H. Chu, 1992, Measurement of a cylindrical far wake. The Eleventh AustralAsian Fluid Mechanics Conference, University of Tasmania, Hobart, Australia, pp 19-22.

5. S.C.M. Yu, E.H. Atta, L.P. Chua and O. Kitoh, 1993, Prediction of flow characteristics in S-shaped intake ducts with inlet swirl, AIAA 24th Fluid Dynamics Conference, Orlando, FL., USA. AIAA 93-3061, pp 1-11.

6. L.P. Chua, E.Y. Goh and F.L. Tan, 1994, Self-preservation of a cylindrical wake, FED-Vol. 184, pp. 55-62. "Boundary layer and free shear flows" edited by J.F. Donovan and J.C. Dutton. The ASME Fluids Engineering DivSCIon Summer Meeting, Lake Tahoe, Nevada, USA.

7. S.C.M. Yu, L.P. Chua, J.H. Yeo and C.Y. Liu, 1994, Visualisation of the flow behind lobed forced mixers using the smoke-wire technique, Asian Visualisation Conference, Chiba, Japan, pp. 225-229.

8. L.P. Chua, E.Y. Goh and S.C.M. Yu, 1995, On the virtual origin of a far wake, The Sixth Asian Congress of Fluid Mechanics, Singapore, pp. 1612-1615.

9 

 

9. J.K.L. Teh, S.C.M. Yu, L.P. Chua and J.H. Yeo, 1995, Some flow characteristics of lobed force mixer at higher velocity ratio, The Sixth Asian Congress of Fluid Mechanics, Singapore, pp. 677-680.

10. E.Y. Goh, E.Y.K. Ng and L.P. Chua, 1995, Length-Scale-Limiting model, The Sixth Asian Congress of Fluid Mechanics, Singapore, pp.1464-1467.

11. L.P. Chua, E.Y. Goh and S.C.M. Yu, 1996, A heat jet with uniform exit temperature distributions, The Ninth International Symposium on Transport Phenomena In Thermal-Fluids Engineering, Singapore, pp. 761-766.

12. S.C.M. Yu, T.H. Yip and L.P. Chua, 1996, Streamwise Vorticity injection in the near field of a two-stream mixing layer, The Ninth International Symposium on Transport Phenomena In Thermal-Fluids Engineering, Singapore, pp. 778-783.

13. L.P. Chua, T. Akamatsu and W.K. Chan, 1996, Flow Characteristics of an enlarged model of a Blood Pump, The 1st JSPS-NUS Seminar on Integrated Engineering, Japan, Kyoto, pp.175-182.

14. W.K. Chan, T. Akamatsu and L.P. Chua, T., 1996, Investigation of Leakage Flow in a Blood Pump, The 1st JSPS-NUS Seminar on Integrated Engineering, Japan, Kyoto, pp.165-174.

15. S.C.M. Yu and L.P. Chua, 1996, On the Decay of Streamwise Vorticity in a lobed forced mixer Trailing Edge, FLOMEKO, Beijing, pp.

16. L.P. Chua, W.K. Chan and C.M.S. Yu, 1997, Preliminary Measurements of a Square Jet, MINDEF-NTU Joint R & D Seminar, pp. 44-49.

17. C.M.S. Yu, L.P. Chua and F.L. Tan, 1997, A Note on the Decay of Streamwise Vorticity Behind a Splitter Pate with Convoluted Trailing Edge, MINDEF-NTU Joint R & D Seminar, pp. 58-62.

18. L.P. Chua and K. B. Tan, 1997, Measurements of the turbulent far wake behind a step cylinder, Proceedings of the Second National Undergraduate Research Programme Congress, Jointly organised by NUS, NSTB and NTU, pp. 1579-1584.

19. L.P. Chua and A. C. Lua, 1997, Preliminary Measurements of a Confined Rectangular Jet, Proceedings of the 1997 ASME Fluids Engineering DivSCIon Summer Meeting, FEDSM’97, Paper No. 3032, Vancouver, British Columbia, Canada. pp. 1-8.

20. N. Li, L.P. Chua, A. C. Lua, C.Y. Liu and T.K. Lim, 1997, Ventilatory Response of a Proportional Assist Ventilation System to Control Parameter Variations, Proceedings of the 1997 ASME Fluids

10 

 

Engineering DivSCIon Summer Meeting, FEDSM’97, Paper No. 3032, Vancouver, British Columbia, Canada. Pg. 1-8.

21. L. P. Chua and J. C. W. De Roza, 1997, Measurement of a Triangular Jet, Proceedings of the Third National Undergraduate Research Programme Congress, Jointly organised by NTU, NSTB and NUS, pp. 483-488.

22. W. K. Chan, L. P. Chua and H. T. Bong, 1997, Design of Blood Pump Impeller, Proceedings of the Third National Undergraduate Research Programme Congress, Jointly organised by NTU, NSTB and NUS, pp. 423-428.

23. L.P. Chua, W.K. Chan and T. Akamatsu, 1997, Measurements of an enlarged model of a Blood Pump, The 9th International Conference on Biomedical Engineering, Singapore, pp. 289-291.

24. L.P. Chua, S. C. Tung, W.K. Chan and S.C.M. Yu, 1997, Wall Shear Stress Measurements of an enlarged Blood Pump model, The 9th International Conference on Biomedical Engineering, Singapore, pp. 292-294.

25. W.K. Chan, T. Akamatsu and L.P. Chua, 1997, The Leakage Flow of a Centrifugal Heart Pump, The 9th International Conference on Biomedical Engineering, Singapore, pp. 280-282.

26. L.P. Chua, N. Li, A.C. Lua and T.K. Lim, 1997, In-vivo Tests on Ventilatory Responses to Control Parameter Variations for a Proportional Assist Ventilation system, The 9th International Conference on Biomedical Engineering, Singapore, pp. 577-579.

27. S.C.M. Yu, J. B. Zhao, W.K. Chan , L.P. Chua and F. Hui, 1997, Steady and Pulsating Flow Characteristics in Cerebrovascular Aneurysm Part II, The 9th International Conference on Biomedical Engineering, Singapore, pp. 300-302.

28. L. P. Chua, X. Y. Huang and K. T. Tan, 1998, Gap measurement of an enlarged blood pump model, Proceedings of the 4th National Undergraduate Research Opportunities Programme Congress, Jointly organised by NUS, NSTB and NTU, Vol. 3, pp. 1371-1374.

29. L. P. Chua and B. S. Low, 1998, Design of rectangular nozzle with different aspect ratio, Proceedings of the 4th National Undergraduate Research Opportunities Programme Congress, Jointly organised by NUS, NSTB and NTU, Vol. 3, pp. 1359-1362.

30. L. P. Chua and L. N. Ung, 1998, Measurement of wall shear stress of an enlarged model of a blood pump, Proceedings of the 4th National Undergraduate Research Opportunities Programme Congress, Jointly organised by NUS, NSTB and NTU, Vol. 3, pp. 1367-1370.

11 

 

31. L. P. Chua and C. L. Chua, 1998, To improve the method for hot wire calibration, Proceedings of the 4th National Undergraduate Research Opportunities Programme Congress, Jointly organised by NUS, NSTB and NTU, Vol. 3, pp. 1363-1366.

32. L.P. Chua, S. S. Wong, S. C. Tung and W.K. Chan, 1998, Wall shear stress in clearance gap of blood pump model, 13th Australasian Fluid Mechanics Conference, Monash University, Melbourne, Australia, Vol. 1, pp. 479-482.

33. L.P. Chua, S. C. Tung, S.C.M. Yu and W.P. Cheng, 1998, On the self-preservation of square jet, 13th Australasian Fluid Mechanics Conference, Monash University, Melbourne, Australia Vol. 1, pp. 579-582.

34. L.P. Chua, S.C. Tung, C.M.S. Yu and W.K. Chan, 1999, Measurements of a Turbulent Jet, The 9th MINDEF-NTU Joint R & D Seminar, pp. 67-72.

35. L.P. Chua, S.C. Tung, C.M.S. Yu and W.P. Cheng, 1999, Comparison of three Turbulent Jet, The 9th MINDEF-NTU Joint R & D Seminar, pp. 73-78.

36. C.M.S. Yu, P.K. Koh, L.P. Chua, W.K. Chan and R.E.K.Goh, 1999, Effects of Inverted Delta Tabs in a Confined Square Jet, The 9th MINDEF-NTU Joint R & D Seminar, pp. 105-110.

37. L.P. Chua, S.C.M. Yu, H.L. Leo, 1999, Performance of enlarged blood pump models with five different impellers, 18th Southern Biomedical Engineering Conference and the 2nd International Conference on Ethical Issues in Biomedical Engineering, Clemson, South Carolina, U.S.A., May 21-23, 1999, pp. 1-6.

38. L.P. Chua, S.C.M. Yu, H.L. Leo, 1999, Measurements of enlarged blood pump models using laser Doppler anemometer, 18th Southern Biomedical Engineering Conference and the 2nd International Conference on Ethical Issues in Biomedical Engineering, Clemson, South Carolina, U.S.A., May 21-23, 1999, pp. 1-6.

39. C.M.S. Yu, X.Y. Hou and L.P. Chua, 1999, Streamwise vorticity enhancement for a lobed forced mixer via scarfing, Proceedings (CD/ROM) of the 3rd ASME/JSME Joint Fluids Engineering Conference, July 18-23, 1999, San Francisco, California, USA, FEDSM99-6916, pp. 1-6.

40. C.M.S. Yu, W.K. Chan, B.T.H. Ng and L.P. Chua, 1999, Experimental and computational analysis on the pulsatile flow behaviour in abdominal aortic aneurysm models, Proceedings (CD/ROM) of the 3rd ASME/JSME Joint Fluids Engineering Conference, July 18-23, 1999, San Francisco, California, USA, FEDSM99-6916, pp. 1-7.

12 

 

41. L.P. Chua, S.C. Tung and C.M.S. Yu, 1999, Comparison of velocity decay, spreading and self-similarity in circular, square and plane jets, Proceedings (CD/ROM) of the 3rd ASME/JSME Joint Fluids Engineering Conference, July 18-23, 1999, San Francisco, California, USA, FEDSM99-7031, pp. 1-7.

42. L.P. Chua, A.C. Lua and H-S Li, 1999, Velocity measurements in a target fluidic flowmeter, Proceedings (CD/ROM) of the 3rd ASME/JSME Joint Fluids Engineering Conference, July 18-23, 1999, San Francisco, California, USA, FEDSM99-7040, pp. 1-8.

43. B.T.H. Ng, W.K. Chan, S.C.M. Yu and L.P. Chua, 1999, Flow visualisation studies in a centrifugal blood pump, 1999 Summer Bioengineering Conference, Big Sky, Montana, U.S.A.

44. P.G.C. Koh and L.P. Chua, 1999, Flow visualisation of a confined jet with and without target, Proceeding (CD/ROM) of the 5th National Undergraduate Research Opportunities Programme Congress, Jointly organised by NUS, NSTB and NTU, 11th Sep., 1999, 4 pages.

45. S.Y. Tan and L.P. Chua, 1999, Measurements of Hemolysis, Proceedings (CD/ROM) of the 5th National Undergraduate Research Opportunities Programme Congress, Jointly organised by NUS, NSTB and NTU, 11th Sep., 1999, 4 pages.

46. S.K. Ong and L.P. Chua, 1999, Measurements of a blood pump model, Proceedings (CD/ROM) of the 5th National Undergraduate Research Opportunities Programme Congress, Jointly organised by NUS, NSTB and NTU, 11th Sep., 1999, 4 pages.

47. M.L. Lok and L.P. Chua, 1999, Low speed calibration of hot wire and parallel wire probes, Proceedings (CD/ROM) of the 5th National Undergraduate Research Opportunities Programme Congress, Jointly organised by NUS, NSTB and NTU, 11th Sep., 1999, 4 pages.

48. Y.C. Koh and L.P. Chua, 1999, Design of blood pump model for gap pressure measurements, Proceedings (CD/ROM) of the 5th National Undergraduate Research Opportunities Programme Congress, Jointly organised by NUS, NSTB and NTU, 11th Sep., 1999, 4 pages.

49. C.M.S. Yu, L.P. Chua and J.C. Li, 1999, A scaling law for wall shear rate through an arterial stenosis under the physiological conditions, The 8th Asian Congress of Fluid Mechanics, Shenzhen, China, Dec. 6-10th, 1999 , pp. 591-595.

50. K.H. Koay, S.C.M. Yu, H.W. Ng and L.P. Chua, 1999, Some studies of the governing parameters in the plasma spraying process, The 8th Asian Congress of Fluid Mechanics, Shenzhen, China, Dec. 6-10th, 1999, pp. 728-732.

13 

 

51. L.P. Chua, S.C.M. Yu and S.C. Poon, 1999, Measurements of step cylinder with two aspect ratios, The 8th Asian Congress of Fluid Mechanics, Shenzhen, China, Dec. 6-10th, 1999, pp. 221-225.

52. L.P. Chua, S.C.M. Yu and P.G.C. Goh, 1999, Flow visualization of a fluidic flowmeter, The 8th Asian Congress of Fluid Mechanics, Shenzhen, China, Dec. 6-10th, 1999, pp. 905-908.

53. L.P. Chua, H-S. Li and H. Zhang, 1999, Low speed calibration and measurements of hot wire, The 8th Asian Congress of Fluid Mechanics, Shenzhen, China, Dec. 6-10th, 1999, pp. 909-912.

54. H.Y. Choo, L.P. Chua and S.C.M. Yu, 2000, Design of Rectangular Jet nozzle with tabs, Proceedings (CD/ROM) of the 6th National Undergraduate Research Opportunities Programme Congress, Jointly organized by NUS, NSTB and NTU, 4 pages.

55. K.H. Chan and L.P. Chua, 2000, To improve the data acquSCItion method for the single hot wire measurements, Proceedings (CD/ROM) of the 6th National Undergraduate Research Opportunities Programme Congress, Jointly organized by NUS, NSTB and NTU, 4 pages.

56. T.J. Chan and L.P. Chua, 2000, Measurements of gap velocity, Proceedings (CD/ROM) of the 6th National Undergraduate Research Opportunities Programme Congress, Jointly organized by NUS, NSTB and NTU, 4 pages.

57. G.C. Ng and L.P. Chua, 2000, Measurements of s step cylinder with 4.5:1 aspect ratio, Proceedings (CD/ROM) of the 6th National Undergraduate Research Opportunities Programme Congress, Jointly organized by NUS, NSTB and NTU, 4 pages.

58. V.S. Choo and L.P. Chua, 2000, Calibration and measurements of low speed wind tunnel using hot wire, Proceedings (CD/ROM) of the 6th National Undergraduate Research Opportunities Programme Congress, Jointly organized by NUS, NSTB and NTU, 4 pages.

59. C.S. Chan and L.P. Chua, 2000, Investigation of hemolysis in a centrifugal blood pump, Proceedings (CD/ROM) of the 6th National Undergraduate Research Opportunities Programme Congress, Jointly organized by NUS, NSTB and NTU, 4 pages.

60. L.P. Chua, A.R. Fraser and C.S. Chan, 2000, A method to determine hemolysis in a centrifugal blood pump, Proceedings of the 19th Southern Biomedical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, U.S.A., Apr., 14-16, 2000, pp. 83.

61. L.P. Chua, S.C.M. Yu and T.T. Koh, 2000, Gap velocity measurements of a heart pump model, Proceedings of the 19th Southern Biomedical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, U.S.A., Apr., 14-16, 2000, pp..57.

14 

 

62. L.P. Chua, Li Y.F. and Yu S.C.M., 2000, Velocity measurements of a square jet, Proceedings (CD/ROM) of the ASME International Fluids Engineering DivSCIon Annual Summer Meeting and Exposition, Boston, Massachusetts, USA, June 11-15, FEDSM2000-11237, pp. 1-15.

63. L.P. Chua, Yu S.C.M. Tam Y.P. and Tan Y.S., 2000, Preliminary PIV measurements of proximal models of various anastomotic angles, Proceedings (CD/ROM) of the ASME International Fluids Engineering DivSCIon Annual Summer Meeting and Exposition, Boston, Massachusetts, USA, June 11-15, FEDSM2000-11201, pp. 1-8.

64. S.C.M. Yu, P.K. Koh and L.P. Chua, 2000, Mixing flow with multiple tabs, Proceedings (CD/ROM) of the ASME International Fluids Engineering DivSCIon Annual Summer Meeting and Exposition, Boston, Massachusetts, USA, June 11-15, FEDSM2000-11009, pp. 1-8.

65. L.P. Chua, H-S. Li and H. Zhang., 2000, Calibration of hot wire for low speed measurements with and without heat, Proceedings (CD/ROM) of the ASME International Fluids Engineering DivSCIon Annual Summer Meeting and Exposition, Boston, Massachusetts, USA, June 11-15, FEDSM2000-11238, pp. 1-13.

66. L.P. Chua, S.C.M. Yu and L.H. Leo, 2000, Laser Doppler Anemometer Measurements of enlarged blood pump models, Proceedings of the 10th International Conference on Biomedical Engineering, Dec., 6-9, 2000, Singapore, pp. 283-284.

67. L.P. Chua, S.C.M. Yu, L.H. Leo and W.K. Chan, 2000, Characteristics of enlarged blood pump models, Proceedings of the 10th International Conference on Biomedical Engineering, Dec., 6-9, 2000, Singapore, pp. 574.

68. L.P. Chua, K.S. Ong, S.C.M. Yu, W.K. Chan and Y.W. Wong, 2000, Gap velocity measurements of an enlarged model pump, Proceedings of the 10th International Conference on Biomedical Engineering, Dec., 6-9, 2000, Singapore, pp. 285-286.

69. L. Lu, L.P. Chua and S.C.M. Yu, 2000, Simulation of steady and unsteady flows in abdominal aortic aneurysm models, Proceedings of the 10th International Conference on Biomedical Engineering, Dec., 6-9, 2000, Singapore, pp. 397-398.

70. Q. Xue, S.C.M. Yu and L.P. Chua, 2000, Scaling laws for wall shear stress through stenosis, Proceedings of the 10th International Conference on Biomedical Engineering, Dec., 6-9, 2000, Singapore, pp. 391-392.

71. K.C. Shi, A.C. Lua and L.P. Chua, 2000, Pressure “run-away” phenomenon in proportional assist ventilation system, Proceedings of the 10th International Conference on Biomedical Engineering, Dec., 6-9, 2000, Singapore, pp. 441-442.

15 

 

72. K.C. Shi, A.C. Lua and L.P. Chua, 2000, Proportional assist ventilation system with adaptive adjustable proportionalities, Proceedings of the 10th International Conference on Biomedical Engineering, Dec., 6-9, 2000, Singapore, pp. 576.

73. W. Hu, W.K. Chan, L.P. Chua, and S.C.M. Yu,, 2000, Investigation of volute geometry on pressure distribution in rotary blood pump impeller, Proceedings of the 10th International Conference on Biomedical Engineering, Dec., 6-9, 2000, Singapore, pp. 281-282.

74. Y. Ding, W.K. Chan, Y.W. Wong, S.C.M. Yu and L.P. Chua, 2000, Investigation of volute geometry on pressure distribution in rotary blood pump impeller, Proceedings of the 10th International Conference on Biomedical Engineering, Dec., 6-9, 2000, Singapore, pp. 575.

75. S.C.M. Yu, and L.P. Chua, 2000, Application of laser techniques in fluid mechanics.

76. L. P. Chua, K. S. Ong and S. C. M. Yu, 2000, Gap Velocity Measurements of an Enlarged Heart Pump Model, Proceedings of the Seminar on Integrated Engineering, Engineering Advances at the Dawn of the 21st Century, 8-9 Dec 2000, Singapore, sponsored by JSPS and NUS/NTU, pp. 525-532

77. L. P. Chua, S. C. M. Yu and H. L. Leo, 2000, Measurements of flow fields between impeller blades

of an Enlarged Blood Pump Models, Proceedings of the Seminar on Integrated Engineering, Engineering Advances at the Dawn of the 21st Century, 8-9 Dec 2000, Singapore, sponsored by JSPS and NUS/NTU, pp. 533-540

78. W.H. Chen, Y. C. Tay and L.P. Chua, 2000, Proceedings of Technology and Engineering Research Programme, TERP 2000, Measurements of Gap Velocity Profiles of a Heart Pump Model, pp. 221-230.

79. X.K. Wang, S.C.M. Yu and L.P. Chua, 2001, Measurements in the near field of a square jet, ASME Fluids Engineering Divison summer Meeting, New Orleans, LouSCIana, May 29 to June 1st 2001, Proceedings (CD/RROM) of ASME FEDSM 2001-18128, pp. 1-6.

80. T. H. Phang and L.P. Chua, 2001, Measurements of a confined rectangular jet, Proceedings (CD/ROM) of the 6th National Undergraduate Research Opportunities Programme Congress, Jointly organized by NUS, NSTB and NTU, 4 pages. (Accepted).

81. W.Y Choong and L.P. Chua, 2001, A method to determine haemolysis in a centrifugal blood pump, Proceedings (CD/ROM) of the 6th National Undergraduate Research Opportunities Programme Congress, Jointly organized by NUS, NSTB and NTU, 4 pages. (Accepted).

82. J. S. Heng and L.P. Chua, 2001, Measurements of gap velocity of blood pump model, Proceedings (CD/ROM) of the 6th National Undergraduate Research Opportunities Programme Congress, Jointly organized by NUS, NSTB and NTU, 4 pages. (Accepted).

16 

 

83. L.S. Tan, L.P. Chua and S.C.M. Yu, 2001, In-vitro pulsatile flow characteristics in proximal anastomotic models, Proceedings (CD/ROM) of the 6th National Undergraduate Research Opportunities Programme Congress, Jointly organized by NUS, NSTB and NTU, 4 pages. (Accepted).

84. W.K. Chan, S.C.M.Yu, L.P. Chua, and Y.W. Wong, 2001, Visualization of relative flow patterns in centrifugal blood pump, Proceedings of the 6th Asian symposium on Flow Visualization, Pusan, Korea.

85. Y.W. Wong, W.K. Chan, S.C.M.Yu and L.P. Chua, 2001, Effects of scaling on centrifugal blood pumps, ISRP 2001, 9th Congress of the International Society for Rotary Blood Pump, Seattle, USA.

86. L.P. Chua, Y. F. Li, T. Zhou and S. C. M. Yu, 2001, Measurements of Turbulent Prandtl Number of a heated Square Jet, Proceedings of 14th Australasian Fluid Mechanics Conference (CD-Rom), 9th-14th Dec., 2001, Adelaide University, Australia, Adelaide.

87. L.P. Chua, Y. F. Li, S. C. M. Yu and T. Zhou, 2001, Axis switching of a square jet,, Proceedings of 14th Australasian Fluid Mechanics Conference (CD-Rom), 9th-14th Dec., 2001, Adelaide University, Australia, Adelaide.

88. L.P. Chua, and A. C. Lua, 2001, Measurements of a rectangular confined jet, Proceedings of 14th Australasian Fluid Mechanics Conference (CD-Rom), 9th-14th Dec., 2001, Adelaide University, Australia, Adelaide.

89. T. Zhou, R.A. Antonia and L.P. Chua, 2001, Performance of an energy-temperature dissipation probe in decaying grid turbulence, Proceedings of 14th Australasian Fluid Mechanics Conference (CD-Rom), 9th-14th Dec., 2001, Adelaide University, Australia, Adelaide.

90. L.P. Chua, K.S. Ong, S.C.M. Yu, W.K. Chan and Y.W. Wong, 2001, Measurements of gap velocity in a heart pump model, Proceedings of 14th Australasian Fluid Mechanics Conference (CD-Rom), 9th-14th Dec., 2001, Adelaide University, Australia, Adelaide.

91. L.P. Chua, K. S. Ong and S.C.M. Yu, 2001, Leakage Flow and Shear Stress in the Clearance Gap of a Heart Pump Model, Proceedings of 14th Australasian Fluid Mechanics Conference (CD-Rom), 9th-14th Dec., 2001, Adelaide University, Australia, Adelaide.

17 

 

92. X.K. Wang, S.C.M. Yu and L.P. Chua, 2002, Measurements of a confined coaxial square jet, 40th AIAA Aerospace sciences Meeting and Exhibition, 14th-17th Jan, 2002, Reno, Nevada USA, AIAA paper 2002-0731.

93. T. Zhou, L.P. Chua and Z. Hao, 2002, Measurements of energy and temperature dissipation rates in the far field of a cylinder wake, Proceedings of the Ninth Asian Congress of Fluid Mechanics, May, 27th-31st, 2002, Isfahan, Iran.

94. T. Zhou, M.W. Yiu, Y. Zhou and L.P. Chua, 2002, Three-dimensional vorticity measurements in the near wake of a circular cylinder, Proceedings of European Turbulence Conference, 2nd-5th July, 2002, University of Southampton, United Kingdom, pp. 177-180.

95. X.K. Wang, S.C.M. Yu and L.P. Chua, 2002, An experimental investigation on the near-field of a coaxial square jet, Proceedings of European Turbulence Conference, 2nd-5th July, 2002, University of Southampton, United Kingdom, pp. 539-542.

96. L.P. Chua, K.S. Ong, S.C.M. Yu, W.K. Chan and Y.W. Wong, 2002, Gap velocity measurements in a 5:1 enlarged heart pump model, Proceedings of 10th Congress of The International Society for Rotary Blood Pumps, Sep, 11-14, 2002, Osaka, Japan, pp. A12.

97. Y. W. Wong, W. K. Chan, L.P. Chua and S.C.M. Yu, 2002, Measurements of velocity In between the impeller blades of blood pump models, Proceedings of 10th Congress of The International Society for Rotary Blood Pumps, Sep, 11-14, 2002, Osaka, Japan, pp. A11.

98. S.C.M. Yu, L.P. Chua, and H.L. Leo, 2002, Measurements of velocity In between the impeller blades of blood pump models, Proceedings of 10th Congress of The International Society for Rotary Blood Pumps, Sep, 11-14, 2002, Osaka, Japan, pp. A12.

99. L.P. Chua, K. S. Ong and S.C.M. Yu, 2002, Measurements of Gap velocity in heart pump model at two extreme flow conditions, Proceedings of the 21st Southern Biomedical Engineering Conference, Sep, 28-29, 2002, Washington D.C., USA, pp. 87-88.

100. L.P. Chua, S.C.M. Yu, W. P. Tam and Y. S. Tan, 2002, Measurements of proximal anastomotic models under steady and physiological flow conditions using PIV, Proceedings of the 21st southern Biomedical Engineering Conference, Sep, 28-29, 2002, Washington D.C., USA, pp. 285-286.

18 

 

101. K. S. Ong, L.P. Chua, T. M. Zhou and S.C.M. Yu, 2002, Leakage Flow of an enlarged Blood Pump Model, Proceedings of the 21st Southern Biomedical Engineering Conference, Sep, 28-29, 2002, Washington D.C., USA, pp.81-82.

102. L.P. Chua, S.C.M. Yu, J. M. Zhang and T. M. Zhou, 2002, Computational study of Steady and Physiological flow conditions in proximal anastomostic models, Proceedings of the 21st Southern Biomedical Engineering Conference, Sep, 28-29, 2002, Washington D.C., USA, 287-288.

103. J. H. Tong, A. R. Fraser and L.P. Chua, 2002, Development of a protocol in measuring haemolysis of a blood pump, Proceedings of the 21st southern Biomedical Engineering Conference, Sep, 28-29, 2002, Washington D.C., USA, pp. 223-224.

104. Zhang J. M., Yu, S. C. M. and Chua, L. P. (2002). Three dimensional computational studies of steady and physiological flow in proximal anastomotic models. World Congress for Chinese Biomedical Engineers, National Health Research Institutes, Taipei, December 11-13, 2002.

105. Zhang J. M., Yu, S. C. M. and Chua, L. P. (2002). A three dimensional numerical study on a bypass conduit. Proceedings (CD-ROM) of the 11th International Conference on Biomedical Engineering, Mandarin Hotel, Singapore, December 4-7, 2002; National University of Singapore.

106. L.P. Chua, K. S. Ong, S.C.M. Yu, W.K. Chan and Y.W. Wong, 2002, Leakage Flow Field Study of Bio-Centrifugal Ventricular Assist Device by LDA, Proceedings (CD-ROM) of the 11th International Conference on Biomedical Engineering, Mandarin Hotel, Singapore, December 4-7, 2002; National University of Singapore.

107. K. S. Ong, L. P. Chua, S.C.M. Yu, and D.N. Ghista 2002, In-vitro velocity measurements within the impeller passages of a bio-centrifugal pump, Proceedings (CD-ROM) of the 11th International Conference on Biomedical Engineering, Mandarin Hotel, Singapore, December 4-7, 2002; National University of Singapore.

108. W. K. Chan, Y.W. Wong, Y Ling, L. P. Chua and S.C.M. Yu, W.K. 2002, Blood trauma in a centrifugal blood pump – a numerical investigation, Proceedings (CD-ROM) of the 11th International Conference on Biomedical Engineering, Mandarin Hotel, Singapore, December 4-7, 2002; National University of Singapore.

109. S.C.M. Yu, L.P. Chua and X.K. Wang, 2002, Effects of vortex-generating tabs on axis-switching of a coaxial square jet, Third International Symposium on Turbulence and Shear Flow Phenomena, Sendai, Japan, June 2003.

110. Z. Hao, T. Zhou and L.P. Chua, 2003 Simultaneous approximations to energy and temperature dissipation rates in the far field of a cylinder wake. Third international symposium on turbulence and Shear Flow Phenomena, 24-27 June, Sendai, Japan, 2003.

19 

 

111. L.P. Chua, K.S. Ong and S.C.M. Yu, 2003, Gap flow field measurements of bio-centrifugal ventricular assist device using laser Doppler anemometer, 4th ASME_JSME Joint Fluids Engineering Conference, Honolulu, Hawaii, USA, July 6-11, 2003, FEDSM@003-45301 (5 pages).

112. L.P. Chua, J.M. Zhang, S.C.M. Yu and T. M. Zhou, 2003, A numerical simulation of a bypass conduit with steady and pulsatile flow, 4th ASME_JSME Joint Fluids Engineering Conference, Honolulu, Hawaii, USA, July 6-11, 2003, FEDSM2003-45300 (6 pages).

113. L.P. Chua, J.M. Zhang, S.C.M. Yu and T. M. Zhou, 2003,Validated Computation of steady and physiologic flow in proximal anastomotic models, World Congress on Medical Physics and Biomedical Engineering, 24-29 August, 2003, Sydney, Australia. 114. K.S. Ong, Sankaranarayanan Meena, G. N. Dhanjoo, L.P. Chua and Y.S. Tan, 2004, Analytical approach in the design and development of a bio-centrifugal ventricular-assist blood pump, Proceeding of the Singapore Cardiac Society 16th annual Scientific Meeting, Controversies and Recent Advances in Cardiovascular Medicine, 21st March, 2004, Singapore, pp. 51-53. 115. M. Sankaranarayanan, G. N. Dhanjoo, L.P. Chua and Y.S. Tan, 2004, Blood flow velocity and pressure profile in the coronary graft, Proceeding of the Singapore Cardiac Society 16th annual Scientific Meeting, Controversies and Recent Advances in Cardiovascular Medicine, 21st March, 2004, Singapore, pp. 58-59. 116. L. Liu , G. N. Dhanjoo and L.P. Chua, 2004, Left ventricle twisting modeling: for performance index and noninvasive determination of pressure, Proceeding of the Singapore Cardiac Society 16th annual Scientific Meeting, Controversies and Recent Advances in Cardiovascular Medicine, 21st March, 2004, Singapore, pp. 71-74. 117. L.P. Chua, J.M. Zhang and S.C.M. Yu, 2004, Numerical simulation of a complete anastomosis model for the coronary artery bypass, Proceeding of the First Asian Pacific Conference on Biomechanics: Emerging Science and Technology in Biomechanics, Osaka University Convention Center, 25-28, March, 2004, Osaka , Japan, pp. 53-54.

118. J.M. Zhang, L.P. Chua and S.C.M. Yu, 2004, Numerical study of pulsatile flow for a complete anastomosis model, Proceeding of the First Asian Pacific Conference on Biomechanics: Emerging Science and Technology in Biomechanics, Osaka University Convention Center, 25-28, March, 2004, Osaka, Japan, pp. 67-68. 119. L.P. Chua, W.F. Ji and T.M. Zhou, 2004, In-vitro study on the steady flow characteristics of proximal anastomotic models, Proceedings (CD-Rom) of the Tenth Asian Congress of Fluid Mechanics, 17-21 May, 2004, University of Peradeniya, Sri Lanka, (6 pages).

120. K.S. Ong, L.P. Chua and S.C.M. Yu, 2004, In-vitro study of a bio-centrifugal ventricular assist device model, Proceedings (CD-Rom) of the Tenth Asian Congress of Fluid Mechanics, 17-21 May, 2004, University of Peradeniya, Sri Lanka, (6 pages). 121. T. Zhou, H. Li, Y. Zhou, L.P. Chua and Z. Hao, 2004, Wavelet multi-resolution analysis of the three-dimensional vorticity in a circular cylinder wake, Proceedings of the 4th International Conference Fluid Mechanics: Recent Advances in Fluid Mechanics, Dalian, People Republic of China, July, 2004, pp. 782-785. 122. Z. Hao, T. Zhou and L.P. Chua, 2004, Simultaneous measurements of energy and temperature dissipation rates in the far field of a cylinder wake, Proceedings of the 4th International Conference

20 

 

Fluid Mechanics: Recent Advances in Fluid Mechanics, Dalian, People Republic of China, July, 2004, pp. 819-822. 123. R. Mao, S.C.M. Yu and L.P. Chua, 2004, Mixing indicators for the forced mixer flow, Proceedings of the 4th International Conference Fluid Mechanics: Recent Advances in Fluid Mechanics, Dalian, People Republic of China, July, 2004. 124. L.P. Chua, and J.H. Tong, 2004, Computational studies of steady flows in designed sleeve models at distal anastomoses, Proceedings of the 1st International BioEngineering Conference in conjunction with 6th annual NTU-SGH Biomedical Engineering Symposium, Singapore, pp. 263-266. 125. L. Liu , L.P. Chua G. N. Ghista and Y.S. Tan, 2004, Numerical investigation of stress field in distal end-to-side anastomosis, Proceedings of the 1st International BioEngineering Conference in conjunction with 6th annual NTU-SGH Biomedical Engineering Symposium, Singapore, pp. 289-292. 126. L.P. Chua, J. M Zhang, T.M. Zhou S.C.M. Yu, D.N. Ghista and Y.S. Tan, 2004, Numerical investigation of hemodynamics for the coronary artery bypass graft model, Proceedings of the 1st International BioEngineering Conference in conjunction with 6th annual NTU-SGH Biomedical Engineering Symposium, Singapore, pp. 286-288. 127. W.F. Ji, L.P. Chua, S.C.M. Yu, D.N. Ghista, T.M. Zhou and Y.S. Tan, 2004, PIV measurements on the pulsatile flow characteristics in 45 degree backward proximal anastomosis, Proceedings of the 1st International BioEngineering Conference in conjunction with 6th annual NTU-SGH Biomedical Engineering Symposium, Singapore, pp. 292-294. 128. L. Liu , S. Y. Yeo, G.N. Ghista, L.P. Chua, G.B. Chai, Y.S. Tan and R.S. Tan, 2004, LV Twisting analyzed for pressure-increase during iso-volumic contraction, Proceedings of the 1st International BioEngineering Conference in conjunction with 6th annual NTU-SGH Biomedical Engineering Symposium, Singapore, pp. 278-281. 129. L.P. Chua, G.L. Song and S.C.M. Yu, 2004, Computation of gap flow fields of a bio-centrifugal blood pump, Proceedings of the 1st International BioEngineering Conference in conjunction with 6th annual NTU-SGH Biomedical Engineering Symposium, Singapore, pp. 259-261. 130. K. Sathappan, K.S. Chian and L.P. Chua, 2004, Novel bioadhesives: Biopolymer crosslinked with genipin, Proceedings of the 1st International BioEngineering Conference in conjunction with 6th annual NTU-SGH Biomedical Engineering Symposium, Singapore, pp. 154-157. 131. S. Meena, L.P. Chua, D.N. Ghista and Y.S. Tan, 2004, Flow studies in aorto-right coronary bypass graft system, Proceedings of the 1st International BioEngineering Conference in conjunction with 6th annual NTU-SGH Biomedical Engineering Symposium, Singapore, pp. 274-277. 132. W.F. Ji, L.P. Chua, S.C.M. Yu, and T.M. Zhou, 2004, Flow pattern and wall shear stress distribution of proximal anastomoses: a particle image velocimetry study, Proceedings (CD-Rom) of the 15th Australasian Fluid Mechanics Conference, The University of Sydney, Sydney, Australia, 13-17 Dec., 2004. 133. M. Sankaranarayanan, D.N. Ghista , L.P. Chua and Y.S. Tan, 2005, Blood flow in an out-of-plane aorto-left coronary artery bypass-graft model, CD-Rom of the 2005 Summer Bioengineering Conference, June 22-26, Vail Cascade Resort and Spa, Vail, Colorado, USA. 134. L. P. Chua, G. L. Song, S.C.M. Yu and T. M. Lim, 2005, Numerical study of the flow characteristics of Kyoto-NTN magnetically suspended centrifugal blood pump, CD-Rom of the 2005 Summer Bioengineering Conference, June 22-26, Vail Cascade Resort and Spa, Vail, Colorado, USA. 135. T. Zhou, A. Rinoshika (H. Li), Z. Hao, Y. Zhou and L.P. Chua, 2005, Wavelet multi-resolution analysis of the three vorticity components in a turbulent far wake, Proceedings of the Symposium of

21 

 

Flow, Structural Vibration, Their Interaction and Control, The University of Guelph, Guelph, Canada, July 29-31, 2005. 136. L. Zhong, D.N. Ghista, E. Y-K. Ng, S.T. Lim and L.P. Chua,, 2005, A new concept of active and passive elastance to explain left ventricular pressure dynamics, The Proceeding of the 7th NTU-SGH symposium, 11th-12th August 2005. 137. L. Zhong, D.N. Ghista, E. Y-K. Ng, S.T. Lim, C.N. Lee and L.P. Chua, 2005, Noninvasive contractility indices based on the left ventricular shape, The Proceeding of the 7th NTU-SGH symposium, 11th-12th August 2005. 138. L. Zhong, D.N. Ghista, L.P. Chua, E. Y-K. Ng, and S.T. Lim, 2005, A non-invasive system for assessment of aortic stiffness in clinical practice, The Proceedings (CD-Rom) of the 27th International Conference of the IEEE Engineering In Medicine and Biology Society, Sep. 1-4, Shanghai, People Republic of China, 4 pages.

[SCI Web of Sc.:1; Scopus:2] 139. L. Liu, L. Zhong, D.N. Ghista, L.P. Chua and Y.S. Tan, 2005, Determination of the left ventricular myofiber angle analytically and its significance, The Proceedings (CD-Rom) of the 27th International Conference of the IEEE Engineering In Medicine and Biology Society, Sep. 1-4, Shanghai, People Republic of China, 4 pages. 140. M. Sankaranarayanan, D.N. Ghista , L.P. Chua and Y.S. Tan, 2005, Influence of geometry on an aorto-left coronary bypass graft model, The Proceedings (CD-Rom) of the 27th International Conference of the IEEE Engineering In Medicine and Biology Society, Sep. 1-4, Shanghai, People Republic of China, 4 pages. 141. L. P. Chua, W.F. Ji and T. M. Zhou, 2005, Experimental study of a complete anastomosis model for the coronary artery bypasses, The Proceedings (CD-Rom) of the 27th International Conference of the IEEE Engineering In Medicine and Biology Society, Sep. 1-4, Shanghai, People Republic of China, 4 pages. 142. L. P. Chua, J.M. Zhang, T. M. Zhou and Y.S. Tan, 2005, In-vitro experimental validation of hemodynamics study for proximal anastomosis models, The Proceedings (CD-Rom) of the 27th International Conference of the IEEE Engineering In Medicine and Biology Society, Sep. 1-4, Shanghai, People Republic of China, 4 pages. 143. T.M. Lim, S.B. Cheng and L. P. Chua, 2005, Parameter estimation of one-axis magnetically suspended system with a digital PID controller, The Proceedings of the International Conference on Sensing Technology, 21st-23rd Nov., 2005, Palmerston Notrth, New Zealand. 144. M. Sankaranarayanan, D.N. Ghista , L.P. Chua and Y.S. Tan, 2005, Comparison of wall shear stress distribution in the normal left coronary tree and bypassed left coronary, The Proceedings of the 12th International Conference on BioMedical Engineering, ICBME 2005, Singapore. 145. L. Zhong, D.N. Ghista, L.P. Chua, R.S. Tan, S.T. Lim,E. Y-K. Ng, Y.S. Tan and T S-J Chua, 2005, A simple-to-use clinically-correlated left ventricular contractility index based on a spherical model of the left ventricle, The Proceedings of the 12th International Conference on BioMedical Engineering, ICBME 2005, Singapore. 146. M. Sankaranarayanan, D.N. Ghista , L.P. Chua and Y.S. Tan, 2006, Numerical investigation of blood flow in a sequential aorto-coronary bypass graft model, Proceedings of IEEE-EMBS conference., Art No.4029138, pp.857-878.

SCI Web of Sc.:0; Scopus:4]

22 

 

147. L. Zhong, R.S. Tan, D.N. Ghista, S.Y. Yeo, S.T. Lim, E. Y-K. Ng and L.P. Chua,, 2006, New stress-based left ventricular contractility index, Singapore Cardiac Society 18th Annual Scientific Meeting, Singapore (Yong Investigator’s Award: Finalists’ Presentation). 148. L. Zhong, R.S. Tan, D.N. Ghista, S.Y. Yeo, S.T. Lim, E. Y-K. Ng and L.P. Chua,, 2006, Left ventricular shape determines function: validation of a novel contractility index from cardiac magnetic resonance, Singapore Cardiac Society 18th Annual Scientific Meeting, Singapore. 149. J.M. Zhang, L. P. Chua, D.N. Ghista and Y.S. Tan, 2006, Identification of susceptible sites for atherosclerotic lesion formation in a coronary artery bypass model, 15th International Conference on Mechanics in Medicine and Biology, Dec. 6-8, Singapore. 150. G.L. Song, L. P. Chua, T.M. Lim and T.M. Zhou, 2006, Numerical study of bio-centrifugal blood pump with different impellers, 15th International Conference on Mechanics in Medicine and Biology, Dec. 6-8, Singapore. 151. L. P. Chua, B.Y. Su, T.M. Lim and T.M. Zhou, 2006, Numerical simulation of an axial blood pump, 15th International Conference on Mechanics in Medicine and Biology, Dec. 6-8, Singapore. 152. L. P. Chua, W.F. Ji, D.N. Ghista and Y.S. Tan, 2006, Effect of anastomosis geometry on hemodynamic performance of CABG: a particle image velocimetry study, 15th International Conference on Mechanics in Medicine and Biology, Dec. 6-8, Singapore. 153. T.M. Lim, S. B. Cheng and L.P. Chua, 2007, Dynamic properties of magnetic bearings for axial flow blood pump application, 15th Congress of the International Society of Rotary Blood Pumps (ISRBP), Powerhouse Museum, Sydney, Australia, 2nd to 4th Nov., 2007. 154. G.L. Song, L.P. Chua, T.M. Lim and G.B. Chai, 2007, Numerical study of bio-centrifugal blood pump with different impeller profiles, 15th Congress of the International Society of Rotary Blood Pumps (ISRBP), Powerhouse Museum, Sydney, Australia, 2nd to 4th Nov., 2007. 155. B.Y. Su, L.P. Chua, T.M. Lim and S.C.M. Yu, 2007, Numerical simulation of an axial blood pump with an enclosed impeller, 15th Congress of the International Society of Rotary Blood Pumps (ISRBP), Powerhouse Museum, Sydney, Australia, 2nd to 4th Nov., 2007. 156. L.P. Chua and W.F. Ji, 2008, Effect of angle on hemodynamics of proximal anastomosis of coronary artery bypass grafting, The Proceeding (CD-Rom) of 12th Asian Congress of Fluid Mechanics, 18th -21st Aug., 2008, Daejeon, Korea. 157. L.P. Chua, G.L. Song and T.M. Lim, 2008, Laser Doppler anemometer (LDA) measurement of the flow in between the impeller blades of a centrifugal blood pump, The Proceeding (CD-Rom) of 12th Asian Congress of Fluid Mechanics, 18th -21st Aug., 2008, Daejeon, Korea. 158. L.P. Chua, B.Y. Su, T.M. Lim and S.C.M. Yu, 2008, Estimate the influence of the different diffuser configuration by CFD, The Proceeding (CD-Rom) of 12th Asian Congress of Fluid Mechanics, 18th -21st Aug., 2008, Daejeon, Korea. 159. F. Kabinejadian, L.P. Chua, D.N. Ghista and Y.S. Tan, 2008, Effect of irregularities of graft inner wall at the anastomosis of a coronary artery bypass graft (CABG), The Proceeding (CD-Rom) of 13th International Conference on Biomedical Engineering (ICBME), 3rd to 6th Dec., 2008, Suntec Singapore International Convention and Exhibition Centre, Singapore. 160. F. Kabinejadian, L.P. Chua, D.N. Ghista and Y.S. Tan, 2009, A new coronary artery bypass graft sequential anastomosis design, Tohoku-NTU symposium, Feb., 2009, IMR, Tohoku University, Sendai, Japan.

23 

 

161. B.Y. Su, L.P. Chua, and T.M. Lim, 2009, Evaluation of the impeller shroud performance of an axial flow VAD using computational fluids dynamics, 17th Congress of the International Society of Rotary Blood Pumps (ISRBP), Singapore, 1st to 3rd Oct., 2009. 162. F. Kabinejadian, L.P. Chua, D.N. Ghista and Y.S. Tan, 2009, A new coronary artery bypass graft (CABG) distal anastomosis design, The Proceeding (CD-Rom) of 11th International Congress of the IUPESM – Medical Physics and Biomedical engineering, World Congress 2009, Munich, Germany. 163. Y.Y. Pey, L.P. Chua and W.L. Siauw, 2011, The characteristics of open cavity flow with a length to depth ratio of 4, 15th International Conference on Computational Mtehods and Experimental Measurements, CMEM 2011, 31st May to 2nd June 2011, New Forest, UK 164. L.P. Chua and B.Y. Su, 2011, Numerical study on the impeller of an axial blood pump, Proceeding of the 4th International Conference on Biomedical Engineering and Informatics, BMEI 2011, Vol. 2, Article No. 6098384, pp. 1153-56. 166. H. S. Lee and L. P. Chua, 2012, Investigation of the stall delay of a 5kW horizontal axis wind turbine using numerical method, International Conference on Renewable Energies and Power Quality, ICREPQ 12, 28-30, Mar., 2012, Santiago de Compostela, Spain. 165. Y.Y. Pey, L.P. Chua and W.L. Siauw, 2012, Effect of cavity trailing edge modification on time-averaged velocity and pressure quantities, Proceedings of 42nd AIAA Fluid Dynamics Conference and Exhibit, 25th -28th June, New Orleans, Louisiana, U.S. A. [SCI Web of Sc.:0; Scopus:1] 166. Z.Y. Hao, T.M. Zhou, H. Jiao, L.P. Chua, 2012, Measurement of hydrodynamic force on a piggyback pipeline, The 22nd International Offshore and Polar Engineering Conference, Rhodes, Greece, June 17-22, 2012. (Accepted)

167. J.M. Zhang, L. Zhong, R.S. Tan and L.P. Chua, 2012, Localized elevation of wall shear stress gradient is related to the susceptible sites of intimal hyperplasia formation: A coronary artery bypass model, The 19th Asean Federation Cardiology Congress 2012.

168. A.M. Azmi, T.M. Zhou, H. Wang, L.P. Chua, 2012, On the effectiveness and mechanism

of vortex-induced vibration suppression using a screen cylinder, Proceedings of the 22nd International Offshore and Polar Engineering Conference, ISOPE-2012, pp. 564-594.

169. Y.Y.Pey,L.P.Chua,andW.L.Siauw.2012,StochasticEstimationofCavityFlowfield,inWorldAcademyofScienceEngineeringandTechnology,Issue71,Paris.

Books

1. L.P. Chua, J.M. Zhang and D.N. Ghista, 2007, Chapter 12: Numerical simulation and PIV measurement of two proximal anastomosis models, Cardiac Pumping and Perfusion Engineering, Edited by D.N Ghista and E.Y.K. Ng, World Scientific Publishing Company Pte. Ltd., pp.313-349

2. D.N. Ghista, L. Liu, L. Zhong, S.Y. Yeo, L.P. Chua, R.S. Tan and Y.S. Tan 2007, Chapter 6: Left

ventricular (LV) pressure increase mechanism during isovolumic contraction, and determination of the equivalent LV myocardial fibers orientation, Cardiac Pumping and Perfusion Engineering, Edited by D.N Ghista and E.Y.K. Ng, World Scientific Publishing Company Pte. Ltd., pp. 165-190.

24 

 

3. D.N. Ghista, L. Zhong, R.S. Tan, E.Y.K. Ng and L.P. Chua, 2007, Chapter 8: New clinically relevant left ventricular contractility index (Based on normalized Wall Stress), Cardiac Pumping and Perfusion Engineering, Edited by D.N Ghista and E.Y.K. Ng, World Scientific Publishing Company Pte. Ltd., pp. 203-213.

4. D.N. Ghista, M. Sankaranarayanan, L.P. Chua, and Y.S. Tan, 2007, Chapter 11: Augmented myocardial perfusion by coronary bypass surgical procedure: Emphasizing flow and shear stress analysis at proximal and distal anastomotic sites providing the basis of better graft patency rates, Cardiac Pumping and Perfusion Engineering, Edited by D.N Ghista and E.Y.K. Ng, World Scientific Publishing Company Pte. Ltd., pp. 255-311.

5. M. Sankaranarayanan, D.N. Ghista, L.P. Chua, Y.S. Tan, K. Sundarayadivelu and G.S. Kassab,

2008, Blood flow in out-of plane Aorto-left coronary sequential bypass graft, Computational Cardiovascular Mechanics: Modeling and Applications in Heart Failure, Edited by J.M. Guccione, G.S. Kassab and M. Ratcliffe, New York: Springer-Verlag, (In press)

 

6. D.N. Ghista, L. Zhong, L.P. Chua, G.S. Kassab, Y. Su and R.S. Tan, 2012, Cardiac Myocardial Disease states cause left ventricular remodeling with decreased contractility and lead to heart failure: interventions by coronary arterial bypass grafting and surgical ventricular restoration can reverse LV remodeling with improved contractility, Chapter 32, pp.781-814.(ISBN-978-953-307-471-9).

 

Others

1. L. P. Chua and R. A. Antonia, 1988, Flow Reversal and Intermittency in a Turbulent Circular Jet, T.N.-FM 88/3, Dept of Mechanical Engg., The University of Newcastle, New South Wales, Australia, pp. 1-42.

2. L. P. Chua and C. Y. Liu, 1992, Development of Techniques for making hot-wire probes and a portable hot-wire calibration device, ARP-M-41/89 Report, School of Mechanical and Production Engg., Nanyang Technological University, pp. 1-61.

3. C. Y. Liu, S. K. W. Tou, L. P. Chua, 1994, Theoretical and Experimental Study of Wind Tunnel Design Parameters, ARP-M-40/91 Report, School of Mechanical and Production Engg., Nanyang Technological University, pp. 1-73.

4. L.P. Chua, W. K. Chan and T. Akamatsu, 1997, Measurements of an enlarged model of a blood pump, Mechanical and Production Engineering Research Bulletin, School of Mechanical and Production Engineering, Nanyang Technological University, pp. 5.

5. S.C.M. Yu and L. P. Chua, 1997, Experimental Studies on the Turbulent Mixing Characteristics of Lobed Forced Mixer, A. R. P. Report, RG 49/94, , School of Mechanical and Production Engg., Nanyang Technological University, pp. 1-144.

6. L.P. Chua, W. K. Chan, S. C. M. Yu and T. Akamatsu, 1998, Measurements of an enlarged blood pump model, Mechanical and Production Engineering Research Bulletin, School of Mechanical and Production Engineering, Nanyang Technological University, pp. 50-51.

25 

 

7. L.P. Chua, N. Li, A.C. Lua and T.K. Lim, 1998, Development of a Proportional Assist Ventilation System for Patients with Respiratory Problems, Mechanical and Production Engineering Research Bulletin, School of Mechanical and Production Engineering, Nanyang Technological University, pp. 48-49.

8. S. C. M. Yu, W. K. Chan, L.P. Chua, A.C. Lua and F. Hui, 1998, Hemodynamic Characteristics in Cerebrovascular Aneurysm Models, Mechanical and Production Engineering Research Bulletin, School of Mechanical and Production Engineering, Nanyang Technological University, pp. 56-57.

9. S. C. M. Yu, L.P. Chua and R.E.K. Goh, 1999, Effect of Curvatures in flow control of intake diffusing Ducts, School of Mechanical and Production Engineering, Nanyang Technological University, Final Report, MINDEF-NTU/03/07, pp. 1-36.

10. L.P. Chua, S. C. M. Yu and S. C. Tung, 1999, Study of Jet flow through nozzles, School of Mechanical and Production Engineering, Nanyang Technological University, Final Report, MINDEF-NTU/03/07, pp. 1-26.

11. L.P. Chua, S. C. M. Yu and H.L. Leo, 2000, Flow characteristics of blood pump model with different impeller designs, Mechanical and Production Engineering Research Bulletin, School of Mechanical and Production Engineering, Nanyang Technological University, pp. 4-5.

12. T.M. Zhou, L. P. Chua and Y. F. Li, and S.C.M. Yu, 2002, Transverse Velocity Derivative Measurements in a square jet, Mechanical and Production Engineering Research Bulletin, School of Mechanical and Production Engineering, Nanyang Technological University, pp. 38-39.

13. L. P. Chua and C. Y. Liu, 2000, Development of Techniques for making X-wire probe and building a data acquSCItion system to process the X-wire signal, ARP 40/93 Report, School of Mechanical and Production Engg., Nanyang Technological University, pp. 1-114.

14. L. P. Chua, W.K. Chang and T. Akamatsu, 2000, Investigation of flow characteristics of a magnetically suspended impeller of a centrifugal pump, RG 15/95 Report, School of Mechanical and Production Engg., Nanyang Technological University, pp. 1-119.

15. L.P. Chua, S. C. M. Yu and K. S. Ong, 2001, Measurements of gap velocity of a blood pump model, Mechanical and Production Engineering Research Bulletin, School of Mechanical and Production Engineering, Nanyang Technological University, pp. 3-4.

16. L.P. Chua, S. C. M. Yu and K. S. Ong, 2002, Measurements of gap velocity of a blood pump model, Mechanical and Production Engineering Research Bulletin, School of Mechanical and Production Engineering, Nanyang Technological University, pp. 21-22

17. Y.W. Wong, W.K. Chan, S. C. M. Yu and L.P. Chua, 2002, Effects of scaling on centrifugal heart pumps, Mechanical and Production Engineering Research Bulletin, School of Mechanical and Production Engineering, Nanyang Technological University, pp. 10-11.

18. T. Zhou, M.W. Yiu, Y. Zhou and L.P. Chua, 2002, Three-dimensional vorticity measurements in the near wake of a circular cylinder, in L.P. Castro (Edit), Advances in Turbulence IX, ROMSEY, 177-180.

26 

 

19. T. Zhou, L.P. Chua and S.C.M. Yu, 2003, Experimental investigations of the near field of vortex dominated wakes, School of Mechanical and Production Engineering, Nanyang Technological University, Final Report, MINDEF-NTU/06/01.

20. W.K. Chan, A. Cheng, L.P. Chua, X.Y. Huang, W. S. Lau, T.M. Lim, Y. K. Ng, K. W. Sim and C.M. Yu, 2003, Investigation of ventricular Assist Device, RG 58/97 Report, School of Mechanical and Production Engg., Nanyang Technological University, pp. 1-74.

21. L.P. Chua and X.Y. Huang, Flow pattern and heat transfer in a tightly-spaced finned channel, 2004, RP 65/96 Report, School of Mechanical and Production Engineering, Nanyang Technological University, pp. 1-166.

22. K. Sathappan, K.S. Chian and L.P. Chua, 2005 Minimally invasive technique for cardiac bypass,

MAE Research Bulletin, pp. 69-70.

23. M. Sankaranarayanan, L.P. Chua, D.N. Ghista and Y.S. Tan, 2005, Flow studies in three dimensional aorto-right coronary bypass graft system, MAE Research Bulletin, pp. 67-68.

24. L. Liu, D.N. Ghista and L.P. Chua, 2005, Mathematical model for left ventricle twisting during

iso-volumetric contraction, MAE Research Bulletin, pp. 72-73.