puk hydrobracket
DESCRIPTION
Интернет-магазин www.Dreamlight.kiev.ua реализует под заказ и со склада освещение больше 500 фабрик со всего мира. Люстры, бра, торшеры, точечные светильники, шинные и трековые системы, уличное освещение Вы можете выбрать на нашем интернет-магазине "Дримлайт" в Киеве.Вы не находите в наших каталогах нужный вам товар? Обращайтесь www.Dreamlight.kiev.ua и мы поможем Вам.TRANSCRIPT
3
THE PERFECT SOLUTION
Hydrofloor-B (Bracket)is a very smart lighting tool for façade illumination.The idea is to provide building façadeswith experienced Hydrofloor IP67 lighting,where no holes in the groundwere previewed by the lighting designer.
Hydrofloor-B design,blends perfectly and discretelyinto the architecture of both modern buildings.
Metal Halides, new Cree XPG LED Performance and halogen give you a complet range of products and source solutions.Light can be focused with precision and locked in place.Can be mounted light-up or light-downor in desired position.
HYDROFLOOR MINI-B GU10Pag. 4
HYDROFLOOR MINI-B LEDPag. 4
HYDROFLOOR MEDIUM-BPag. 5
HYDROFLOOR MEDIUM-B LEDPerformancePag. 6
HYDROFLOOR MAXI-BPag. 7
HYDROFLOOR MAXI-B LEDPerformancePag. 8
INDEX
MA
D E I N II TA
LY
MA
D E I N II TA
LY
5
• High corrosion resistance die-cast aluminium body and bracket• Polyester painting with phosphocromating pre-finish• Clear (or frosted) tempered glass• Stainless steel screws• ES50 35W max GU10 230V 50Hz• Silicone rubber gasket• Protection against impact IK09 (10 joule)• M 20 cable gland
Hydrofloor Mini-B GU10
READY TO BE INSTALLED
35 WATT MAX
ES 50 - BASE GU10
220-240V 50/60HZ
IP67 -
1,2 KG UNIT GROSS WEIGHT
AVAILABLE COLOURS
TEXTURE (ON REQUEST)
TEXTURE (ON REQUEST)
BLACK
BLACK
LIGHT BEAM OPTIONS BULB FEATURES LIGHT COLOURS
COLD WHITE
“VISIBLE AND GOOD LIGHT”.These new fixtures were completely developed by P.U.K. with a group of 3 super L.E.D. assembled in one part, provided with an electronic driver,an aluminium dissipator and 3 lenses.• IP 67• Half frosted tempered glass• Cree LED “XPG” 3 x 1 watt• 190 V... 250 V/AC 50-60 Hz short circuit and overload protected• 3 meters silicone wire included
Hydrofloor Mini-B LED Performance
READY TO BE INSTALLED
190 V ... 250 V/AC 50-60 HZ
MOVABLE
IP67 -
1,25 KG UNIT GROSS WEIGHT
AVAILABLE COLOURSLIGHT BEAM OPTIONS
SPOT
BULB FEATURES LIGHT COLOURS
COLD WHITE
WARM WHITE
SEE BULBFEATURES
QPAR16
L.E.D.
115
mm
150 mm
115
mm
150 mm
MA
D E I N II TA
LY
6 7
“VISIBLE AND GOOD LIGHT”.• High corrosion resistance die-cast aluminium body and bracket• Polyester painting with phosphocromating pre-finish• Stainless steel screws• Electronic driver 220/240V 50/60Hz• Silicone rubber gasket• Cree LED “XPG”• 1 meter silicone wire included
Hydrofloor Medium-B LED Performance
READY TO BE INSTALLED
10 WATT
220-240V 50/60HZ ELECTRONIC
IK09
IP67 -
2,2 KG UNIT GROSS WEIGHT
AVAILABLE COLOURSLIGHT BEAM OPTIONS
SPOT 10°
FLOOD 30°(ON REQUEST)
BULB FEATURES LIGHT COLOURS
COLD WHITE6000° K
WARM WHITE3000° KL.E.D.
BLACK
+15° ±15°
0°
MOVABLEBULB
SILVER (ON REQUEST)
130
mm
215 mm
BLACK
• High corrosion resistance die-cast aluminium body and bracket• Polyester painting with phosphocromating pre-finish• Clear (or frosted) tempered glass• Stainless steel screws• AR111 Halospot 50W G53 (QR – LP 111)• Conventional ballast 230V 50Hz• Silicone rubber gasket• Protection against impact IK09 (10 joule)• M 20 cable gland• Movable• Unit Gross weight Kg 2,5
Hydrofloor Medium-B (AR-111)
READY TO BE INSTALLED
50 WATT MAX
HALOSPOT AR-111 - G53
230 VOLTS CONVENTIONAL
IP67 -
2,5 KG UNIT GROSS WEIGHT
AVAILABLE COLOURSLIGHT BEAM OPTIONS BULB FEATURES LIGHT COLOURS
+15° ±15°
0°
MOVABLEBULB
HALOSPOT AR-111
SEE BULBFEATURES
SILVER (ON REQUEST)
130
mm
215 mm
6
MA
D E I N II TA
LY
7
“VISIBLE AND GOOD LIGHT”.• High corrosion resistance die-cast aluminium body and bracket• Polyester painting with phosphocromating pre-finish• Stainless steel screws• Electronic driver 220/240V 50/60Hz• Silicone rubber gasket• Cree LED “XPG”• 1 meter silicone wire included
Hydrofloor Medium-B LED Performance
READY TO BE INSTALLED
10 WATT
220-240V 50/60HZ ELECTRONIC
IK09
IP67 -
2,2 KG UNIT GROSS WEIGHT
AVAILABLE COLOURSLIGHT BEAM OPTIONS
SPOT 10°
FLOOD 30°(ON REQUEST)
BULB FEATURES LIGHT COLOURS
COLD WHITE6000° K
WARM WHITE3000° KL.E.D.
BLACK
+15° ±15°
0°
MOVABLEBULB
SILVER (ON REQUEST)
130
mm
215 mm
MA
D E I N II TA
LY
8
“VISIBLE AND GOOD LIGHT”.• High corrosion resistance die-cast aluminium body• Polyester painting with phosphocromating pre-finish• Stainless steel screws• Electronic driver 220/240V 50/60Hz• Silicone rubber gasket• Max static weight resistance 5000 Kg• Double M20 cable glands• Cree LED “XPG”• 16 watt
• 1 meter silicone wire included
Hydrofloor Maxi-B LED Performance
READY TO BE INSTALLED
16 WATT
220-240V 50/60HZ
IP67 -
5 KG UNIT GROSS WEIGHT
AVAILABLE COLOURSLIGHT BEAM OPTIONS BULB FEATURES LIGHT COLOURS
SPOT 10°
FLOOD 30°(ON REQUEST)
L.E.D.
BLACK
SILVER (ON REQUEST)
HOLE FOR RECESSING 260 x 260 mm
REC
ESSI
NG
DEP
TH m
m 1
94
2 m
m T
HIC
KN
ESS
HOLE FOR RECESSING 260 mm Ø
REC
ESSI
NG
DEP
TH m
m 1
94
2 m
m T
HIC
KN
ESS
Ø 265 mm 265 x 265 mm
COLD WHITE6000° K
WARM WHITE3000° K
200
mm
335 mm
• High corrosion resistance die-cast aluminium body and bracket• Polyester painting with phosphocromating pre-finish• Clear (or frosted) tempered glass• Stainless steel screws• HIT CRI 35 or 70W G12• Conventional ballast 230V 50Hz• Silicone rubber gasket• Protection against impactIK09 (10 joule)• Double M20 cable glands• Spot 10° reflector (standard)• Flood 23° reflector (on request)• Super Spot 4° (on request)
Hydrofloor Maxi-B (G12)
READY TO BE INSTALLED
70 WATT
HIT-CRI - BASE G12
230 VOLTS
IP67 -
6,0 KG UNIT GROSS WEIGHT
AVAILABLE COLOURSLIGHT BEAM OPTIONS BULB FEATURES LIGHT COLOURS
BLACK
SILVER (ON REQUEST)
HIT-CRI - BASE G12
FLOOD 23°REFLECTOR
(OPTION)
SUPERSPOT 4°REFLECTOR
(OPTION)
DARK-LIGHT ATTACHMENT(ACCESSORY)
LIGHT GRID(ACCESSORY)
SPOT 10° REFLECTOR (STANDARD)
SUPERSPOT 4°(on request)
SPOT 10°
FLOOD 23°(on request)
ORDERING FEATURESHYFLO MAXI-B 35W G12 SUPERSPOT
HYFLO MAXI-B 35W G12 SPOT
HYFLO MAXI-B 35W G12 FLOOD
HYFLO MAXI-B 70W G12 SUPERSPOT
HYFLO MAXI-B 70W G12 SPOT
HYFLO MAXI-B 70W G12 FLOOD
200
mm
335 mm
8
“VISIBLE AND GOOD LIGHT”.• High corrosion resistance die-cast aluminium body• Polyester painting with phosphocromating pre-finish• Stainless steel screws• Electronic driver 220/240V 50/60Hz• Silicone rubber gasket• Max static weight resistance 5000 Kg• Double M20 cable glands• Cree LED “XPG”• 16 watt
• 1 meter silicone wire included
Hydrofloor Maxi-B LED Performance
READY TO BE INSTALLED
16 WATT
220-240V 50/60HZ
IP67 -
5 KG UNIT GROSS WEIGHT
AVAILABLE COLOURSLIGHT BEAM OPTIONS BULB FEATURES LIGHT COLOURS
SPOT 10°
FLOOD 30°(ON REQUEST)
L.E.D.
BLACK
SILVER (ON REQUEST)
HOLE FOR RECESSING 260 x 260 mm
REC
ESSI
NG
DEP
TH m
m 1
94
2 m
m T
HIC
KN
ESS
HOLE FOR RECESSING 260 mm Ø
REC
ESSI
NG
DEP
TH m
m 1
94
2 m
m T
HIC
KN
ESS
Ø 265 mm 265 x 265 mm
COLD WHITE6000° K
WARM WHITE3000° K
200
mm
335 mm
MA
D E I N II TA
LY
11
Guarantee terms
illuminazione guarantees the performance of its products only and exclusively in relation to how they are
used, their destination and application as explicitly specified.
THE GUARANTEE OF THE PRODUCTS HAS A 5 YEAR VALIDITYSTARTING FROM THE DATE OF DELIVERY TO THE PURCHASER.
Any claims must be forwarded in writing to illuminazione together with a copy of the purchase invoice
complete with delivery date, description of the fault and number of products that are faulty.
illuminazione, according to its indisputable choice will arrange either to repair or replace them within a
reasonable period of time from the claim. Returned faulty goods will be accepted by illuminazione only if
previously authorised in writing, correctly forwarded, suitably packed and with transport prepaid.
This guarantee does not cover further expenses sustained by the Purchaser consequent to the faulty condition
of the products; in particular illuminazione will not bear the cost of collecting the faulty products from
customers (including cost of dismantling) and forwarding of replacement products to them.
Any responsibility on the part of illuminazione is explicitly excluded in the following cases:
• use, assembly and/or improper or unreasonable maintenance of the products, and/or their correct preservation:
• if damage or bad functioning is caused by work carried out on products without prior written authorisation from
illuminazione (e.g. disassembly, alterations, substitutions, etc.);
• if the quality and performance have been compromised by the addition of accessories not approved by
illuminazione .
This guarantee includes and replaces every other possible responsability stemming from the products supplied, no
matter how it originated: in particular the Purchaser cannot claim damages, reduction in prices or cancellation of
the contract. In no case will illuminazione be responsible for indirect damage or loss of profit.
The Law Court in Monza is the sole competent Court for any disputes.
11
MA
D
EII NN I T
ALY
P.U.K. Illuminazione S.r.l.Via S. Giorgio, 16 • 20851 • Lissone (MB) • ITALYTel. +39 039 24.57.920 • Fax: +39 039.24.57.924e-mail: [email protected] - http://www.puk.it