puris 3d prints the largest titanium part
TRANSCRIPT
Puris just printed the largest titanium part.
Now What?
Want this presentation? ASM Webinar On-Demand
http://bit.ly/bigTi
Like this stuff?Join the conversation on
metal powder additive manufacturing:www.purisllc.com/blog
Webinar Hashtag:
#bigTiConnect:
Linked In : Puris, LLC Twitter: @PurisLLC
First, let’s [frame] the claim…
We just printed the complex
largest titanium part to full density, for commercial use.
∧ ∧
How big is
big?
19”
19”
11”
Size
31 lb. 14 kg
Weight
Cross-section thickness: 3/8 inch
Complexity
Time
We can’t show youthe real thing.
but we can show you this:
Why it’s important
For anyone who might still be doubting what the 3D printer can do in terms of
size, they may want to check out the kind of
history being made over at Puris, with the largest complex titanium part for commercial use having just been
3D printed.
“
3Dprint.com
Secret to Success
Powder + Process
PowderSafe
PowderSafeQuality
PowderSafeQualityAvailable
PowderSafeQualityAvailableAffordable
Powder + Process
Binder-jetting is cool.
Large job box
32” x 20” x 16”
Binder-jetting is cool.
Large job boxWider particle range
Binder-jetting is cool.
Large job box
Wider particle range
No residual stress buildup
Hot Isostatically Pressed 1750F Microstructure
50mm
10 mm
100x 500x
Binder-jetting is cool.Preserves microstructure
Preserves physical properties Binder-jetting is cool.
Ti-6Al-4VTensile Properties of M-Flex Printed + Sintered + HIP Test Bars Condition
UTS ksi (MPa)
0.2% YSKsi (MPa)
Elong%
RA%
As-HIP 1800F/15ksi/4h 146 (1008) 131 (902) 15 31HIP + Mill Anneal 1300F 1h AC
140 (968) 122 (840) 15 37
HIP + Vacuum Anneal 1400F 1h
140 (968) 127 (875) 15 41
Specification AMS 4994
130 (896) min 120 (827) min
10 min 25 min
Sintering + HIP
Finishing
What next?
Development [email protected]
412.260.8048
Meet
We serve additive manufacturing.We are metallurgy experts.We make clean, Titanium powder.
We have the largest production capacity for powder and 3D printing.
Want these slides? http://bit.ly/bigTi
Like this stuff?Join the conversation on
metal powder additive manufacturing:www.purisllc.com/blog
Webinar Hashtag:
#bigTiContact Eric Bono, VP Engineering Solutions:
Email : [email protected]: 412.260.8048