SYLLABUS FOR SUB ENGINEER (CIVIL)

150 MARKS

(1) SURVEYING :-

INTRODUCTION, CHAIN SURVEYING, COMPASS SURVEYING, LEVELLNG & CONTOURING, PLANE TABLE SURVEYING, LEVELLING, THEDOLITE SURVEY,

TACHEOMETRIC SURVEY, TRIGNOMETRICAL SURVEY, MINOR INSTRUMENTS,

SETTING OUT CURVES, MODERN METHODS OF SURVEYING.

(2) MATERIAL TECHNOLOGY

INTRODUCTION, STONE AND AGGREGATE, CLAY PRODUCTS, BINDING

MATERIALS, TIMBER, FLOORING MATERIAL, ROOFING MATERIAL, STEEL AND

ALUMINUM PRODUCTS, PLASTICS, MISCELLANEOUS, MARKET SURVEY.

(3) CIVIL ENGINEERING DRAWING

INTRODUCTION, BUILDING BYE LAWS, PRINCIPLES OF PLANNING, DETAILS OF

BUILDING & DRAWING, DOORS & WINDOWS, STAIR CASES, PITCHED ROOFS

INCLUDING ROOF TRUSSES, BOX & PIPE CULVERTS, MODIFICATION OF EXISTING

BUILDING.

(4) BUILDING CONSTRUCTION

INTRODUCTION, FOUNDATION, MASONRY, CONCRETING, DOOR AND WINDOWS,

STAIRS, ROOF TRUSSES, FLOORS, FINISHING, SITE CLEARANCE & SCAFFOLDING ,

MACHINERY & EQUIPMENTS, SAFTEY & ENVIRONMENTAL ASPECTS, PRECAST

CONSTRUCTION.

(5) PUBLIC HEALTH ENGINEER

INTRODUCTION, QUANTITY OF WATER, SOURCES OF WATER, QUALITY OF WATER,

PUMPS, PIPE AND PIPE SPECIAL, INTAKE, WATER TREATMENT PROCESS,

DISTRIBUTION SYSTEM, SYSTEM OF SANITATION AND SEWERAGE, SEWER LAYING,

WASTE WATER COLLECTION SYSTEM, QUANTITY OF SEWAGE, CHARACTERSTICS OF

SEWAGE, SEWAGE TREATMENT PROCESSES, HOUSE WATER SUPPLY AND

SANITATION, RURAL SANITATION.

(6) MECHANICS OF STRUCTURE

INTRODUCTION, SIMPLE STRESS AND STRAIN, COMPOUND STRESS AND STRAINS,

BENDING MOMENT AND SHEAR FORCE, STRESSES IN BEAMS DUE TO BENDING,

STRESSES IN BEAMS DUE TO SHAER, SLOPE AND DEFLECTION OF BEAMS, FIXED

BEAMS COLUMN.

(7) CONCRETE TECHNOLOGY

INTRODUCTION, TYPE OF CEMENT, TESTING OF CEMEN , AGGREGATES AND THEIR

TESTING, FRESH CONCRETE, STRENGTH OF CONCRETE, CONCRETE MIX DESIGN.

(8) HIGHWAY ENGINEERING

INTRODOCTION, INVESTIGATION & PLANNING OF NEW ROADS , ROAD GEOMETRIC,

PAVEMENT DESIGN, MATERIALS AND CONSTRUCTION, DRAIANAGE OF ROADS ,

TRAFFIC ENGINEERING , ARBORICULTURES , ROAD MAINTENANCE.

(9) QUANTITY SURVEYING & COSTING

INTRODUCTION, STAGE-I OR APPROXIMATE ESTIMATE , TAKING OUT QUANTITIES ,

USE OF SCHEDULE OF RATES, ANALYSIS OF RATES , DETAILED ESTIMATE OF

BUILDING , EARTHWORK ESTIMATE , ESTIMATE OF TIMBER STRUCTURE , ESTIMATE

OF R.C.C. STRUCTURE , ESTIMATE OF STEEL STRUCTURE , ESTIMATE OF CULVERTS

AND BRIDGE, ESTIMATE OF WATER SUPPLY AND SANITARY FITTING , VALUATION.

(10) STRUCTURAL DESIGN & DRAFTING

INTRODUCTION, INTRODUCTION OF LSM , LIMIT STATE OF COLLAPSE FLEXURE,

LIMIT STATE OF COLLAPSE SHEAR, DEVELOPMENT LENGTH AND ANCHORAGE

LENGTH, LIMIT STATE OF SERVICEABILITY, IS PROVISION FOR DESIGN CONSIDERATION,

DESIGN OF SLABS, DESIGN OF BEAMS, DESIGN OF STAIRCASE , COLUMNS ,

COLUMNS FOOTINGS, INTRODUCTION OF WORKING STRESS METHODS,

INTRODUCTION OF PRESTRESS METHODS OF DESIGN, INTRODUCTION, RIVETED AND

WELDED JOINT, BEAMS, TENSION MEMBER, COMPRESSION MEMBER , COLUMN

BASES AND COLUMN FOOTING , ROOF TRUSS, ANALYSIS OF CONTINUOUS BEAMS.

(11) COMPUTER AIDED DRAFTING & PROGAMMING

INTRODUCTOIN, AUTO-CAD FEATURES , APPLICATION OF AUTOCAD , ADVANCE 3D

DRAFTING , IDEA OF WALK THROUGH , INTRODUDTION OF AUTO LISP,

INTERACTION WITH DRAWING EDITOR AND DECISION MAKING, WORKING WITH

GEOMETRY AND TEXT, WORKING WITH CHANGING PROPERTIES OF OBJECTS,

DEBUGGING PROGRAMMES .

(12) CONSTRUCTION MANAGEMENT

INTRODUCTION, WORK BY CONTRACT AGENCY, WORK BY DEPARTMENT (A)

GENERAL , WORK BY DEPARTMENT (B) MEASUREMENT & PAVMENT , CASH BILL,

AUCTION & T.A. RULE , LABOUR WELPARE AND LAWS, TIME SCHEDULE FOR WORKS,

CONSTRUCTION MANAGEMENT AND EQUIPMENTS .

(13) RAILWAYS & BRIDGE

RAILWAYS - INTRODUCTION, PERMANENT WAY, RAILWAY TRACK, RAILWAY FIX

TRUSS AND FASTENINGS, GEOMETRICS, POINTS AND CROSSING , LAYOUT OF

STATION AND YARDS, SIGNALING AND INTERLOKING, MODERN DEVELOPMENT IN

RAILWAYS

BRIDGE - INTRODUCTION, SITE INVESTIGATION AND HYDRAULICS, SUBSTRUCTURE

AND SUPER STRUCTURE OF BRIDGES, CONSTRUCTION AND MAINTENANCE OF

BRIDGES, VISITS AND REPORT.

(14) SOIL MECHANICS

INTRODUCTION, WEIGHT AND VOLUME RELATIONSHIP, CLASSIFICATION OF SOIL,

PERMEABILITY, SHEAR STRENGTH AND BEARING CAPACITY, COMPACTION, EARTH

PRESSURE, SOIL STABILIZATION, SOIL INVESTIGATION.

SYLLABUS FOR COMBINED RECRUIRTMENT EXAMINATION OF SUB ENGINEER (E/M)

(A) Comman Question for All 100 Marks

(1) Applied Physics (a) Measurement of vectors. (Fundamental units, derived units, unit system, S.I.

Units) force, motion and gravitation, classification of

motion (characteristics of different type of motion.

Newtons law of motion, speed, velocity, Acceleration,

equation for motion and friction, circular and rotary

motion.

(b) High temperature measurement, kinetic theory of

gases.

(c) Thermo Dymanics, 1st law of thermodynamic,

Isothermic adiabatic charges and latent heat.

(2) Applied Chemistry (a) Metal and metallurgy its alloy corrosion and protection

(i) Occurrence, extraction, properties and engineering

uses of metal with its alloy.

(ii) Corrosion, Cause of corrosion and its control.

(b) Fuel Explosive, classification and application.

(c) Water treatment.

(d) pollution-meaning, Causes of pollution, effect and

Prevention.

(3) Applied Mechanics (a) Work, power and Energy.

Definition, form of energy, Conservation of power

energy, power of engine and pumps, relation

between heat and Mech.works.

(b) Simple lifting machines Law of Machine, study of

machine, wheel axle, pulley, jacks worm and worm

wheel.

(c) Transmission of power.

Transmission of power through belt, rope and gear,

gear train, spur helical, bevel gears.

(4) Strength of Material (i) Simple stress & strain.

Introduction, type of stress and strain etc.

(ii) Mechanical properties & testing of materials,

Definition, necessity of testing, type of test etc.

(1) Thermal Engineering (i) Basic concept of thermo dymanics 1st and IInd law of thermo dymanics.

(ii) Internal combustion engines (Introduction,

function of two strokes, four strokes, efficiency,

Mech. Efficiency, Lubrication of I.C. Engine.

(iii) Air compressor, classification and its

application.

(iv) Heat Transfer-Modes of Heat Transfer and its

application.

(2) Basic electrical Engineering (i) D.C. circuit- Ohms law, Resistance and Resistivity, Kirchhoffs law, Series and Parallel

Combination of Resistance.

(3) Electromagnetism (i) EMF due to electric current in conductor, Magnetic field due to a coil, magnetic field due

to solenoid, force on a current carrying

conductor, Fleming left hand rule.

Electromagnetic Induction, faradas laws of

electro-Magnetic induction, Fleming right hand

rule, self induction, mutual induction,

Alternating voltage and current, three phase

circuit.

(4) Transformer Principale of operation of Transformer, Transformer Ratio, Transformer on load, effect of core losses, effect of magnetization, eddy current loss, Hysteresis loss, efficiency of Transformer, D.C. machine, motor and

three phase induction motor principle of

working of induction motor, Starting of

induction motor.

(5) Theory of Machines Introduction of theory of machine, velocity, accelertation and friction, fly wheel, and crank efforts, power transimission gears and gear train, Governor Cam and followers etc.

Lathe, Boring, Milling, Machines, Grinding &

finishing process, jigs & Fixtures, machine tools

etc.

(6) Fluid mechanic and Hydraulics (i) Fundamental of Fluid flow and Pressure and its measurements. Basic equations of fluid flow.

(ii)Pumps Types of pumps and selection of

Pumps.

(B) Electrical 50 Marks

(1) Introduction to A.C. Machines

* Overview of AC Machines

* Difference between A.C. & D.C. machines.

(2) Basic Feature of A.C. Machines.

* Parts of A.C. Machine & their functions

* Materials for the various parts

* Stator & rotor windings

(3) Alternators

* Types of alternators

* Principle & EMF equation

* Winding factors & its effect on induced EMF.

* Effect of speed & excitation on induced EMF.

* Different excitation systems

* Excitation system used in modern alternators

* Concept of leakage, armature & synchronous reactance

* Principle of working of brushless alternators

* Applications

(4) A.C. Motors.

* Types of A.C. motors

* Stator & rotor parts, function, windings

* Concept of rotating magnetic fields

* Stator & rotor current equations

* Effect of frequency on slip

* Torque equations

* Condition for maximum torque

* Circle diagram

* Necessity of induction motor starters and different types

* Different types of induction motors

(5) HVDC/HVAC System

* Merits & Demerits

* Types of DC links

* Controlled Rectification & Filters

* Reactive Power requirements

* Controlled characteristics

(6) Inverters

* Need of inverter

* inverter circuits using SCR in series and pareller mode

* Circuit diagram of emergency tube light

(7) Converters

* Need of converter, Types of converter (DC to DC and AC to AC)

* Block diagram of chopper

* Circuit diagrams of chopper using switching transistor and SCRs

* Need of Commutation, methods

* Single phases and three phase cycloconverter

(8) Regulated Power Supply

* Need of regulation

* Zener regulated DC power supply and its limitations

* Working of shunt and series regulated power supply using transistor

* IC regulated power supplies (Circuit diagram)

* Block diagrams of (SMPS) switch mode power supply

* AC stabilizer using tap changer

* Block diagram of servo stabilizer

(9) Speed Control of Motors

* Advantages of speed control

* Separately excited DC motor single and three phases controlled rectifiers

* Methods of speed regulation, fields failure protection armature current limier

(Block diagrams)

* Dual rectifier for reversal of rotation

* Speed control by chopper (block diagram)

* Circuit diagrams of speed control of single phase and three phase induction

motor cycloconverter (Slip ring)

(C) Mechanical 50 Marks

(1) Introrduction (2) Air Refrigeration Cycles (3) Vapour Compression Cycle (4) Vapour Absorption System (5) Refrigerant (6) Vapour Compression System Components (7) Air Conditdioning & Psychrometic Processes (8) Cooling Load Calculation (9) Air Distribution Systems (10) Air Conditioning Systems (11) Fundamentals of Estimating (12) Estimation of Material Cost

(13) Introduction (Vehicle Layouts and Types) (14) Automobile Engines (Power Plant) (15) Fuel Systems for Petrol Engine (16) Fuel System for Diesel Engine (17) Auto-Electric System (18) Transmission & Propeller Shaft (19) Final Drive & Rear Axle (20) Steering & Front Axle (21) Brakes (22) Suspension Systems (23) Wheels and Tyres (24) Automobiles Emissions and its Control