pwm 180-pin probing board manual · all other brand and product names are trademarks or service...

a

PWM 180-PinProbing Board Manual

an EZ-Extender® product

Revision 1.0, September 2013

Part Number82-000387-01

Analog Devices, Inc.One Technology WayNorwood, Mass. 02062-9106

Copyright Information©2013 Analog Devices, Inc., ALL RIGHTS RESERVED. This document may not be reproduced in any form without prior, express written consent from Analog Devices, Inc.

Printed in the USA.

DisclaimerAnalog Devices, Inc. reserves the right to change this product without prior notice. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by impli-cation or otherwise under the patent rights of Analog Devices, Inc.

Trademark and Service Mark NoticeThe Analog Devices logo, EngineerZone, EZ-Extender, and EZ-KIT Lite are registered trademarks of Analog Devices, Inc.

All other brand and product names are trademarks or service marks of their respective owners.

Regulatory Compliance The PWM 180-Pin Probing Board is designed to be used solely in a labo-ratory environment. The board is not intended for use as a consumer end product or as a portion of a consumer end product. The board is an open system design which does not include a shielded enclosure and therefore may cause interference to other electrical devices in close proximity. This board should not be used in or near any medical equipment or RF devices.

The PWM 180-Pin Probing Board is in the process of being certified to comply with the essential requirements of the European EMC directive 2004/108/EC and therefore carries the “CE” mark.

The probing board contains ESD (electrostatic discharge) sensitive devices. Electrostatic charges readily accumulate on the human body and equipment and can discharge without detection. Permanent damage may occur on devices subjected to high-energy discharges. Proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Store unused probing boards in the protective shipping package.

PWM 180-Pin Probing Board Manual v

CONTENTS

PREFACE

Product Overview .......................................................................... vii

Purpose of This Manual ................................................................ viii

Intended Audience ........................................................................ viii

Manual Contents ............................................................................ ix

What’s New in This Manual ............................................................ ix

Technical Support ............................................................................ x

Supported Products .......................................................................... x

Product Information ....................................................................... xi

Analog Devices Web Site ........................................................... xi

EngineerZone ........................................................................... xii

Notation Conventions .................................................................... xii

Contents

vi PWM 180-Pin Probing Board Manual

USING PWM 180-PIN PROBING BOARD

Package Contents ......................................................................... 1-2

PWM 180-Pin Probing Board Installation ..................................... 1-2

Expansion Interface ...................................................................... 1-3

Reference Design Information ....................................................... 1-4

PWM 180-PIN PROBING BOARD HARDWARE REFERENCE

System Architecture ...................................................................... 2-1

Connectors ................................................................................... 2-2

Connector (J1) ....................................................................... 2-3

Connector (P1) ....................................................................... 2-3

Connector (P2–P6) ................................................................. 2-3

Connector (P7–P16) ............................................................... 2-3

PWM 180-PIN PROBING BOARD BILL OF MATERIALS

PWM 180-PIN PROBING BOARD SCHEMATIC

INDEX

PWM 180-Pin Probing Board Manual vii

PREFACE

Thank you for purchasing the PWM 180-Pin Probing Board, Analog Devices, Inc. probing board for the ADSP-CM40x family of mixed-signal control processors.

The ADSP-CM408F mixed-signal control processor is based on the ARM® Cortex®-M4 processor core and is designed for motor control and industrial applications. The probing board is shipped with all of the neces-sary hardware—you can start the evaluation immediately.

Product OverviewThe PWM 180-Pin Probing Board is a separately sold extender board that plugs onto the ADSP-CM403F and ADSP-CM408F EZ-KIT Lite® evalu-ation systems. The extender board aids the design and prototyping phases of processor-targeted applications.

The board extends the capabilities of the evaluation system by providing a point for probing any signal of the 180-pin asynchronous bus and PWM expansion interface connectors.

The board features:

• Two 180-pin connectors

• Samtec QSH-090-01-F-D-A

• Samtec QTH-090-01-F-D-A

Purpose of This Manual

viii PWM 180-Pin Probing Board Manual

• Five probing headers

• Samtec TSW-118-07-L-D

• Ten GND headers

• FCI 90726-402HLF

For information about the hardware components of the product, refer to PWM 180-Pin Probing Board Bill Of Materials.

Purpose of This ManualThe PWM 180-Pin Probing Board Manual provides instructions for installing the product hardware (board). A schematic and a bill of materi-als are provided for reference.

Intended AudienceThe primary audience for this manual is a programmer who is familiar with an ARM Cortex-M4-based core.

The ADSP-CM40x family of mixed-signal control processors is based on the ARM Cortex-M4 processor core with floating-point unit and inte-grated SRAM memory, flash memory, accelerators, and peripherals.

The applicable documentation for programming the ARM Cortex-M4 processor core includes:

• Cortex-M4 Devices Generic User Guide

• CoreSight ETM-M4 Technical Reference Manual

• Cortex-M4 Technical Reference Manual

http://infocenter.arm.com/help/

PWM 180-Pin Probing Board Manual ix

Preface

For additional information on this Analog Devices processor, see the ADSP-CM40x Mixed-Signal Control Processor Hardware Reference. This document describes the ARM Cortex-M4 processor core and memory architecture used on the ADSP-CM40x processor, but does not provide detailed programming information for the ARM core.

For more information about programming the ARM core, visit the ARM Information Center:


Manual ContentsThe manual consists of:

• Chapter 1, Using PWM 180-Pin Probing BoardDescribes the product functionality.

• Chapter 2, PWM 180-Pin Probing Board Hardware ReferenceProvides information about the board’s hardware components.

• Appendix A, PWM 180-Pin Probing Board Bill Of MaterialsLists the hardware components used to manufacture the board.

• Appendix B, PWM 180-Pin Probing Board SchematicLists the resources for board-level debugging.

What’s New in This ManualThis is the first edition (Revision 1.0) of the PWM 180-Pin Probing Board Manual.




Technical Support

x PWM 180-Pin Probing Board Manual

Technical SupportYou can reach Analog Devices processors and DSP technical support in the following ways:

• Post your questions in the processors and DSP support community at EngineerZone®:http://ez.analog.com/community/dsp

• Submit your questions to technical support directly at:http://www.analog.com/support

• E-mail your questions about processors and processor applications to: [email protected] [email protected] (Greater China support)

• In the USA only, call 1-800-ANALOGD (1-800-262-5643)

• Contact your Analog Devices sales office or authorized distributor. Locate one at:www.analog.com/adi-sales

• Send questions by mail to:Processors and DSP Technical SupportAnalog Devices, Inc.Three Technology WayP.O. Box 9106Norwood, MA 02062-9106USA

Supported ProductsThis board supports Analog Devices ADSP-CM403F and ADSP-CM408F EZ-KIT Lites.

http://ez.analog.com/community/dsp

http://www.analog.com/support

mailto:[email protected]

mailto:[email protected]

http://www.analog.com/adi-sales

PWM 180-Pin Probing Board Manual xi

Preface

Product InformationProduct information can be obtained from the Analog Devices Web site and the online help system.

Analog Devices Web SiteThe Analog Devices Web site, www.analog.com, provides information about a broad range of products—analog integrated circuits, amplifiers, converters, and digital signal processors.

To access a complete technical library for each processor family, go to http://www.analog.com/processors/technical_library. The manuals selection opens a list of current manuals related to the product as well as a link to the previous revisions of the manuals. When locating your manual title, note a possible errata check mark next to the title that leads to the current correction report against the manual.

Also note, myAnalog.com is a free feature of the Analog Devices Web site that allows customization of a Web page to display only the latest information about products you are interested in. You can choose to receive weekly e-mail notifications containing updates to the Web pages that meet your interests, including documentation errata against all manu-als. myAnalog.com provides access to books, application notes, data sheets, code examples, and more.

Visit myAnalog.com (found on the Analog Devices home page) to sign up. If you are a registered user, just log on. Your user name is your e-mail address.

http://www.analog.com

http://www.analog.com/processors/technical_library/

http://www.analog.com/subscriptions



Notation Conventions

xii PWM 180-Pin Probing Board Manual

EngineerZoneEngineerZone is a technical support forum from Analog Devices. It allows you direct access to ADI technical support engineers. You can search FAQs and technical information to get quick answers to your embedded processing and DSP design questions.

Use EngineerZone to connect with other DSP developers who face similar design challenges. You can also use this open forum to share knowledge and collaborate with the ADI support team and your peers. Visit http://ez.analog.com to sign up.

Notation ConventionsText conventions used in this manual are identified and described as follows.

Example Description

File > Close Titles in reference sections indicate the location of an item within the CCES environment’s menu system (for example, the Close command appears on the File menu).

{this | that} Alternative required items in syntax descriptions appear within curly brackets and separated by vertical bars; read the example as this or that. One or the other is required.

[this | that] Optional items in syntax descriptions appear within brackets and sepa-rated by vertical bars; read the example as an optional this or that.

[this,…] Optional item lists in syntax descriptions appear within brackets delim-ited by commas and terminated with an ellipse; read the example as an optional comma-separated list of this.

.SECTION Commands, directives, keywords, and feature names are in text with letter gothic font.

filename Non-keyword placeholders appear in text with italic style format.

http://ez.analog.com

PWM 180-Pin Probing Board Manual xiii

Preface

Note: For correct operation, ...A Note provides supplementary information on a related topic. In the online version of this book, the word Note appears instead of this

symbol.

Caution: Incorrect device operation may result if ...Caution: Device damage may result if ... A Caution identifies conditions or inappropriate usage of the product that could lead to undesirable results or product damage. In the online version of this book, the word Caution appears instead of this symbol.

Warning: Injury to device users may result if ... A Warning identifies conditions or inappropriate usage of the product that could lead to conditions that are potentially hazardous for the devices users. In the online version of this book, the word Warning appears instead of this symbol.

Example Description

Notation Conventions

xiv PWM 180-Pin Probing Board Manual

PWM 180-Pin Probing Board Manual 1-1

Using PWM 180-Pin Probing Board

1 USING PWM 180-PIN PROBING BOARD

This chapter provides information about using the PWM 180-Pin Prob-ing Board.

The following topics are covered.

• Package Contents

• PWM 180-Pin Probing Board Installation

• Expansion Interface

• Reference Design Information

For detailed information on how to program the ADSP-CM40x proces-sors, refer to the documents listed in the Preface.

For detailed information about the specific evaluation system, refer to the ADSP-CM403F EZ-KIT Lite Evaluation System Manual or the ADSP-CM408F EZ-KIT Lite Evaluation System Manual.

Package Contents

1-2 PWM 180-Pin Probing Board Manual

Package ContentsYour PWM 180-Pin Probing Board package contains the following items:

• PWM 180-Pin Probing Board

• Hardware for securing the extender board onto the EK-KIT Lite

Contact the vendor where you purchased your EZ-KIT Lite or contact Analog Devices, Inc. if any item is missing.

PWM 180-Pin Probing Board InstallationFollow these instructions to ensure correct operation of the product hardware.

1. Attach the extender board to the EZ-KIT Lite.

The P1 connector on the extender board can be connected to the corresponding 180-pin connector on the EZ-KIT Lite.

2. Use the provided hardware to secure the extender to the EZ-KIT Lite.


Using PWM 180-Pin Probing Board

Expansion InterfaceThe expansion interface allows a custom-designed daughter board to be tested across various hardware platforms that have the same expansion interface.

The expansion interface implemented on the ADSP-CM40x EZ-KIT Lites consists of two 180-pin connectors. The connectors contain a major-ity of the processor’s signals. There is also a 120-pin connector for Analog signals. The PWM 180-Pin Probing Board will not mate with the 120-pin connectors.

Analog Devices does not support and is not responsible for the effects of additional circuitry.

Figure 1-1. Mechanical Mating Details

Part DescriptionItem0.75in Nylon Standoff1

1.0in Nylon Standoff2 3 Steel Screw

4 Nylon Spacer

1

1

2 3

4

3

Reference Design Information


Reference Design InformationA reference design info package is available for download on the Analog Devices Web site. The package provides information on the design, lay-out, fabrication, and assembly of the probing board.

The information can be found at:

http://www.analog.com/MCEI1-PWMProbingBoard

http://www.analog.com/MCEI1-PWMProbingBoard


2 PWM 180-PIN PROBING BOARD HARDWARE REFERENCE

This chapter describes the hardware design of the PWM 180-Pin Probing Board.

The following topics are covered.

• System ArchitectureDescribes the board’s configuration and explains how the board components interface with the processor.

• ConnectorsShows the locations and provides part numbers for the on-board connectors. In addition, the manufacturer and part number infor-mation is provided for the mating parts.

System ArchitectureThe PWM 180-Pin Probing Board allows all signals to be probed. Silkscreen on the board corresponds with the pin number of the QTH-090-01-F-D-A (P1) connector. These numbers also match one-to-one with the QSH-090-01-F-D-A (Jx) connector located on the attached EZ-KIT Lite.

It is also possible to connect the PWM 180-Pin Probing Board in between the EZ-KIT Lite and an extender card with additional circuitry. To do this, connect P1 of the extender card to the EZ-KIT Lite and attach the extender card to J1 of the PWM 180-Pin Probing Board.

Connectors


ConnectorsThis section describes connector functionality and provides information about mating connectors. The connector locations are shown in Figure 2-1.

Figure 2-1. Connector Locations


PWM 180-Pin Probing Board Hardware Reference

Connector (J1)

Connector (P1)

Connector (P2–P6)

Connector (P7–P16)

Part Description Manufacturer Part Number

180-pin high speed socket SAMTEC QSH-090-01-F-D-A

Mating Connector

180-pin high speed header SAMTEC QTH-090-01-F-D-A


180-pin high speed header SAMTEC QTH-090-01-F-D-A

Mating Connector

180-pin high speed socket SAMTEC QSH-090-01-F-D-A


IDC 18x2 0.1” SAMTEC TSW-118-07-L-D

Mating Connector

0.1” female connector with wire or oscilloscope probe


IDC 2x1 0.1” FCI 90726-402HLF

Mating Connector

0.1” oscilloscope probe GND

Connectors


PWM 180-Pin Probing Board Manual A-1

A PWM 180-PIN PROBING BOARD BILL OF MATERIALS

The bill of materials corresponds to PWM 180-Pin Probing Board Schematic.

Ref. Qty Description Reference Designator

Manufacturer Part Number

1 10 IDC 2X1 IDC2X1 P7-P16 FCI 90726-402HLF

2 1 0.5MM 180PIN SAMTEC_QSH-090-F-D-A

J1 SAMTEC QSH-090-01-F-D-A

3 1 0.5MM 180PIN SAMTEC_QTH-090-F-D-A

P1 SAMTEC QTH-090-01-F-D-A

4 5 IDC 18X2 SAMTEC_TSW-118-07-L-D

P2-P6 SAMTEC TSW-118-07-L-D

A-2 PWM 180-Pin Probing Board Manual

0.11 2

A0387-2012

PWM 180-PIN PROBING BOARDTitle

09/25/2012

D

4

3

2

1

A B C

20 Cotton Road

Nashua, NH 03063

A B C D

4

3

2

1

PH: 1-800-ANALOGD

C

Title

Size Board No.

Date Sheet of

DEVICESANALOG

Rev

PWM 180-PIN PROBING BOARD

0.12 2

A0387-2012

PWM 180-PIN PROBING BOARDConnectors

09/25/2012

D

4

3

2

1

A B C

20 Cotton Road

Nashua, NH 03063

A B C D

4

3

2

1

PH: 1-800-ANALOGD

C

Title

Size Board No.

Date Sheet of

DEVICESANALOG

Rev

P2

SAMTEC_TSW-118-07-L-D

9

87

65

4

3635

3433

3231

30

3

29

2827

2625

2423

2221

20

2

19

1817

1615

1413

1211

10

1

J1

SAMTEC_QSH-090-F-D-A

13579

11131517192123252729313335373941434547495153555759

24681012141618202224262830323436384042444648505254565860

6163656769717375777981838587899193959799

101103105107109111113115117119

62646668707274767880828486889092949698100102104106108110112114116118120

121123125127129131133135137139141143145147149151153155157159161163165167169171173175177179

122124126128130132134136138140142144146148150152154156158160162164166168170172174176178180

181182183184

185186187188

189190191192

191

190

192

189

187

186

185

188

184

183

182

181

ADDRESS

DATA

CONTROL

UART

TWI

SPI

GPIO

RESERVED

POWER

SYS

P4


9

87

65

4

3635

3433

3231

30

3

29

2827

2625

2423

2221

20

2

19

1817

1615

1413

1211

10

1

P3


9

87

65

4

3635

3433

3231

30

3

29

2827

2625

2423

2221

20

2

19

1817

1615

1413

1211

10

1

P5


9

87

65

4

3635

3433

3231

30

3

29

2827

2625

2423

2221

20

2

19

1817

1615

1413

1211

10

1P6


9

87

65

4

3635

3433

3231

30

3

29

2827

2625

2423

2221

20

2

19

1817

1615

1413

1211

10

1

P1

SAMTEC_QTH-090-F-D-A

1357911131517192123252729313335373941434547495153555759

2468

1012141618202224262830323436384042444648505254565860

6163656769717375777981838587899193959799101103105107109111113115117119

62646668707274767880828486889092949698

100102104106108110112114116118120

121123125127129131133135137139141143145147149151153155157159161163165167169171173175177179

122124126128130132134136138140142144146148150152154156158160162164166168170172174176178180

181182183184

185186187188

189190191192

191

190

192

189

187

186

185

188

184

183

182

181

P7

IDC2X1

2

1

P8

IDC2X1

2

1

P9

IDC2X1

2

1

P10

IDC2X1

2

1

P11

IDC2X1

2

1

P12

IDC2X1

2

1

P13

IDC2X1

2

1

P14

IDC2X1

2

1

IDC2X1

P16

2

1

P15

IDC2X1

2

1

PIN_3

PIN_3

PIN_3

PIN_9

PIN_9

PIN_9

PIN_1

PIN_1

PIN_1

PIN_11

PIN_11

PIN_11

PIN_7

PIN_7

PIN_7PIN_5

PIN_5

PIN_5

PIN_13

PIN_13

PIN_13

PIN_33

PIN_33

PIN_33PIN_35

PIN_35

PIN_35

PIN_31

PIN_31

PIN_31

PIN_15

PIN_15

PIN_15

PIN_19

PIN_19

PIN_19PIN_17

PIN_17

PIN_17

PIN_21

PIN_21

PIN_21PIN_23

PIN_23

PIN_23

PIN_27

PIN_27

PIN_27PIN_29

PIN_29

PIN_29

PIN_25

PIN_25

PIN_25

PIN_2PIN_2

PIN_2

PIN_4PIN_4

PIN_4

PIN_6PIN_6

PIN_6

PIN_8PIN_8

PIN_8

PIN_10PIN_10

PIN_10

PIN_12PIN_12

PIN_12

PIN_14PIN_14

PIN_14

PIN_16PIN_16

PIN_16

PIN_20PIN_20

PIN_20

PIN_18PIN_18

PIN_18

PIN_22PIN_22

PIN_22

PIN_24PIN_24

PIN_24

PIN_26PIN_26

PIN_26

PIN_28PIN_28

PIN_28

PIN_30PIN_30

PIN_30

PIN_32PIN_32

PIN_32

PIN_34PIN_34

PIN_34

PIN_36PIN_36

PIN_36

PIN_37

PIN_37

PIN_37 PIN_38PIN_38

PIN_38

PIN_39

PIN_39

PIN_39 PIN_40PIN_40

PIN_40

PIN_41

PIN_41

PIN_41 PIN_42PIN_42

PIN_42

PIN_43

PIN_43

PIN_43 PIN_44PIN_44

PIN_44

PIN_45

PIN_45

PIN_45 PIN_46PIN_46

PIN_46

PIN_47

PIN_47

PIN_47 PIN_48PIN_48

PIN_48

PIN_49

PIN_49

PIN_49 PIN_50PIN_50

PIN_50

PIN_51

PIN_51

PIN_51 PIN_52PIN_52

PIN_52

PIN_53

PIN_53

PIN_53 PIN_54PIN_54

PIN_54

PIN_55

PIN_55

PIN_55 PIN_56PIN_56

PIN_56

PIN_57

PIN_57

PIN_57 PIN_58PIN_58

PIN_58

PIN_59

PIN_59

PIN_59 PIN_60PIN_60

PIN_60

PIN_61

PIN_61

PIN_61 PIN_62PIN_62

PIN_62

PIN_63

PIN_63

PIN_63 PIN_64PIN_64

PIN_64

PIN_65

PIN_65

PIN_65 PIN_66PIN_66

PIN_66

PIN_67

PIN_67

PIN_67 PIN_68PIN_68

PIN_68

PIN_69

PIN_69

PIN_69 PIN_70PIN_70

PIN_70

PIN_71

PIN_71

PIN_71 PIN_72PIN_72

PIN_72

PIN_73

PIN_73

PIN_73 PIN_74PIN_74

PIN_74

PIN_75

PIN_75

PIN_75 PIN_76PIN_76

PIN_76

PIN_77

PIN_77

PIN_77 PIN_78PIN_78

PIN_78

PIN_79

PIN_79

PIN_79 PIN_80PIN_80

PIN_80

PIN_81

PIN_81

PIN_81 PIN_82PIN_82

PIN_82

PIN_83

PIN_83

PIN_83 PIN_84PIN_84

PIN_84

PIN_85

PIN_85

PIN_85 PIN_86PIN_86

PIN_86

PIN_87

PIN_87

PIN_87 PIN_88PIN_88

PIN_88

PIN_89

PIN_89

PIN_89 PIN_90PIN_90

PIN_90

PIN_91

PIN_91

PIN_91 PIN_92PIN_92

PIN_92

PIN_93

PIN_93

PIN_93 PIN_94PIN_94

PIN_94

PIN_95

PIN_95

PIN_95 PIN_96PIN_96

PIN_96

PIN_97

PIN_97

PIN_97 PIN_98PIN_98

PIN_98

PIN_99

PIN_99

PIN_99 PIN_100PIN_100

PIN_100

PIN_101

PIN_101


PIN_102

PIN_103

PIN_103


PIN_104

PIN_105

PIN_105


PIN_106

PIN_107

PIN_107


PIN_108

PIN_109

PIN_109


PIN_110

PIN_111

PIN_111


PIN_112

PIN_113

PIN_113


PIN_114

PIN_115

PIN_115


PIN_116

PIN_117

PIN_117


PIN_118

PIN_119

PIN_119


PIN_120

PIN_121

PIN_121


PIN_122

PIN_123

PIN_123


PIN_124

PIN_125

PIN_125


PIN_126

PIN_127

PIN_127


PIN_128

PIN_129

PIN_129


PIN_130

PIN_131

PIN_131


PIN_132

PIN_133

PIN_133


PIN_134

PIN_135

PIN_135


PIN_136

PIN_137

PIN_137


PIN_138

PIN_139

PIN_139


PIN_140

PIN_141

PIN_141


PIN_142

PIN_143

PIN_143


PIN_144

PIN_146PIN_146

PIN_146

PIN_148PIN_148

PIN_148

PIN_149

PIN_149


PIN_150

PIN_151

PIN_151


PIN_152

PIN_153

PIN_153


PIN_154

PIN_155

PIN_155


PIN_156

PIN_157

PIN_157


PIN_158

PIN_159

PIN_159


PIN_160

PIN_161

PIN_161


PIN_162

PIN_163

PIN_163


PIN_164

PIN_165

PIN_165


PIN_166

PIN_167

PIN_167


PIN_168

PIN_169

PIN_169


PIN_170

PIN_171

PIN_171


PIN_172

PIN_173

PIN_173


PIN_174

PIN_175

PIN_175


PIN_176

PIN_177

PIN_177


PIN_178

PIN_179

PIN_179


PIN_180

PIN_147

PIN_147

PIN_147PIN_145

PIN_145

PIN_145

PWM 180-Pin Probing Board Manual I-1

I INDEX

Aarchitecture, of this probing board, 2-1

Bbill of materials, A-1board installation, 1-2

mechanical mating details, 1-3board schematic, B-1

Cconnector (J1), 2-3connectors, 2-2

diagram of locations, 2-2J1, 2-3P1, 2-3P2-P6, 2-3P7-P16, 2-3

contents, of this probing board package, 1-2

EEngineerZone, xiiexpansion interface, 1-3

Iinstallation of board, 1-2

mechanical mating details, 1-3

Nnotation conventions, xii

PP1 connector, 2-3P2-P6 connector, 2-3P7-P16 connector, 2-3package contents, 1-2product overview, vii

Rreference design information, 1-4

Sschematic of board, B-1system architecture, of this probing board,

2-1

Ttechnical support, x

Index

I-2 PWM 180-Pin Probing Board Manual

pwm 180-pin probing board manual · all other brand and product names are trademarks or service...

Documents