pwm & recycling technology - p2
TRANSCRIPT
![Page 1: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/1.jpg)
Plastic waste
management and
recycling technology
![Page 2: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/2.jpg)
Plastic waste Management &
Recycling Technology
22/08/14 – In Project Proposal
INTRODUCTION
OBJECTIVES INVOLVED
CASE STUDY
EXISTING PROBLEMS
REMEDIAL MEASURES
CONCLUSION
REFERENCE
![Page 3: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/3.jpg)
objectives
To emphasize the reduced use of plastic and the
beneficial management of plastic waste.
Efficient transformation of plastic into energy and fuel.
Making our environment an eco friendly zone.
Modify the design of recycling Machines.
Install the recycling unit at TNAU.
Compare the envi.factors of Coimbatore with other
cities.
Making our Eco fest - 15------Plastic free & Models
![Page 4: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/4.jpg)
Plastics
1.PET
2.HDPE
3.PVC
4.LDPE
5.PP
6.PS
7.OTHERS
Drink bottles and oven trays manufacturing.
Bottles for milk and washing up liquids.
Pipes and fittings
Carrier bags and garbage bin liners
Medicine bottles
Packaging pellets, Fast food trays etc..,
Mostly not available in suffi.quantities for recycling
![Page 5: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/5.jpg)
Distribution of plastic in
manufacturing sector
18.60%
11.90%
10%
7.40%7%
6.70%
6.70%
5.20%
4.00%
3.40%
2.60%
2.20%1.70%
1.60% 1.40%
1.20%
8.50%
chips and conf bags bottles/caps and lids PET bottles supermarket retail bags
straws garbage bags packaging food bags
cling wrap fruit juice bottles softdrinks/water cups/utensils
food containers milk bottles pack rings cigarette lighters
![Page 6: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/6.jpg)
Plastic waste sources
Plastic Wastes
Others
MunicipalIndustry
![Page 7: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/7.jpg)
Methodology
Processing
Segregation
Selection
![Page 8: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/8.jpg)
Recycling technology
Primary recycling - Involves processing of waste
into a product of similar characteristics.
Secondary recycling - Involves processing of waste
plastic into materials having different characteristics.
Tertiary recycling - Involves production of basic
chemicals and fuel from segregated municipal waste.
quaternary recycling - Involves energy extraction
by burning and incineration.
![Page 9: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/9.jpg)
forms of recycling
Raw Product
Make a
Recycling
1.Mechanical Recycling
Chemical Recycling
Reactions
Feedstock
Fuel, Oil
Industries
2.Chemical Recycling
![Page 10: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/10.jpg)
3.Thermal Recycling
Contin…..
Waste to Power Generation Method
![Page 11: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/11.jpg)
Disadvantages
High Initial cost.
Recycled products may not last for long.
Unsafe and unhygienic recycling sites.
May create more pollution.
Not wide spread on large scale.
![Page 12: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/12.jpg)
Alternatives to be considered
Plasma Pyrolysis Technology
Incineration of waste by plasma
torches leaving minute or
no residues.
Dehydrochlorination
Conversion of plastic waste into Liquid fuel using
units. By extracting hydrogen and chlorine separately
oil and hydrochloric acid can be obtained.
![Page 13: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/13.jpg)
Conti…
Bio degradable plastics - Manufacture of plastics
that are eco-friendly. They have a decomposing
nature.
![Page 14: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/14.jpg)
advantages
Plasma Pyrolysis
Clean destruction of hazardous waste Preventing waste
from entering landfills. No harmful emission of toxic waste.
De-hydro chlorination
Extraction of clean energy and Hydrochloric acid.
Bio Degradable plastic
Takes less time to breakdown ,these are renewable
![Page 15: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/15.jpg)
Treatment & Separation Technique
1.Wet Separating Techniques
Flotation of mixed plastics utilizing selective wetting
characters in order to change the surface of specific
plastics from hydrophobic to hydrophilic
2.Dry separating Techniques
Especially PVC from mixture of plastics, Low capital
Input, means it is environmentally friendly
![Page 16: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/16.jpg)
Environmental impact assessment
Plastic manufacturing consumes significant amount of
resources. (4% of worlds annual oil production)
Littered plastic spoils the beauty of the environment
Affects human health due to toxic release into
atmosphere.
Non bio degradable nature arrests recharge of ground
water aquifers.
Garbage mixed with plastic may cause problems in
landfill operations.
![Page 17: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/17.jpg)
After Project proposal
Visit to Thudiyalur and Saravanampatti Recycling Centre
Aug - 22 to Yesterday
![Page 18: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/18.jpg)
Their Sales
Recycled Plastics 1 kg is Rs.30
For Roads
![Page 19: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/19.jpg)
Mrs.Rani
![Page 20: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/20.jpg)
Machines and Products
![Page 21: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/21.jpg)
Data of TNAU
Wastes – 1 to 1.5 ton / day
Departments – 45 +
Plastic Sale – Yearly twice , Rs.15 / Kg
Excess – Hostels, Canteens, Shops
Suggestion – Recycling Unit at TNAU
![Page 22: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/22.jpg)
After mid - sem places to be visited
Sri Sai Chakra Polymers
Etc……
![Page 23: PWM & Recycling Technology - P2](https://reader034.vdocument.in/reader034/viewer/2022042722/58ab0b8d1a28ab70038b4e39/html5/thumbnails/23.jpg)
Thank You