pz2-51 npn photoelectric sensors pz2-51p pnp pz2 series
TRANSCRIPT
Lineup
Options
Features� Excellent mirror surface detection
� IP67 rated waterproof
� Sensors can operate side-by-side
Self-contained Photoelectric SensorsPZ2 Series
Greatly improved serviceabilityMounting the sensor body and routing the cable can be performed independently, reducing time and labour.If replacing the sensor body with a new one because of damage, or if replacing the sensor body with a different model due to changes in specifi cations, you need only to replace the sensor body.
IP67 rated, waterproof constructionPZ2 sensors use a detachable cable and IP67 rated construction for peace-of-mind in sites where equipment may get wet.
P.R.O.* function provides stable detection of mirrored surfaces (PZ2-61)
* Polarised Refl ection Optics
In the case of mirrored surfaces, the horizontal light is not received because it is refl ected in the same state when it hits the detected object.
The polarisation of the horizontal light emitted by the transmitter is interrupted by the refl ector, and it returns to the receiver as scattered light.
Type Appearance Detecting distance Model Output
Thrubeam 7 mPZ2-51 NPN
PZ2-51P PNP
Retro-refl ective 2.5 mPZ2-61 NPN
PZ2-61P PNP
Diffuse-refl ective
Long-range 60 cmPZ2-41 NPN
PZ2-41P PNP
Short-range 10 cmPZ2-42 NPN
PZ2-42P PNP
Slit plate only
Slit width Detecting distance Target size
0.5 mm 500 mm 0.5 x 5 mm
1 mm 800 mm 1 x 5 mm
2 mm 1500 mm 2 x 5 mm
Slit plate and polarising fi lter
Slit width Detecting distance Target size
0.5 mm 200 mm 0.5 x 5 mm
1 mm 400 mm 1 x 5 mm
2 mm 700 mm 2 x 5 mm
Refl ectorTransmitted light waves are horizontal.
When light hits the refl ector, its polarisation is interrupted and it is refl ected in all directions.
Refl ectorTransmitted light waves are horizontal.
Polarisation remains unchanged for mirrored surfaces.
Support Tools Refl ectorS-P12 Protective coverProtective cover withmounting bracket.Thickness: 3.0 mm(Stainless steel).
S-P01 Free adjusterFreely-adjustable height and angle.Both vertical and horizontal mountings are available.
Refl ector R-2(accessory for PZ2-61) OP-95388
PZ2-61(P) Detecting distance when using PZ2-61 (P): 2.5 m
* The order code for R-5 is R-5. The order code for other refl ectors is the OP number.
PZ2-61(P) Detecting distance when using PZ2-61 (P): 1.7 m
PZ2-61(P) Detecting distance when using PZ2-61 (P): 0.7 m
PZ2-61(P) Detecting distance when using PZ2-61 (P): 0.2 to 0.8 m
Refl ector R-3(optional)OP-96436
Refl ector R-5*(optional)
PRO refl ection tape (optional) OP-96629
47
47
31
31 34
40
30
11.6
Expert Engineering Siteswww.sensorcentral.com
An on-line guide of automation knowledge and techniques
A-3 attachment kit (optional) specially designed for PZ2-51 and -51P thrubeam models
210
210 PZ2 Self-contained Photoelectric Sensors
211
Self-contained Photoelectric Sensors PZ2
TECHNICAL GUIDE: P.754 CAD DATA Download:www.keyence.com.sg/CADG www.keyence.com.sg
211Fibreoptic
Photoelectric
Proximity
Area Sensor
Pressure
Multi Function
High Precision
PLC/Touch Panel
Static Elimination
Vision System
Laser Marker
Barcode
Microscope
PHOTOELECTRICSELECTION GUIDE
CMOS LASERGV
COMPACT LASERLV-S/H
RGB COLOURCZ-V20CZ
FLUORESCENCE DETECTION UVCZ-H52
LUSTRE DETECTIONCZ-H72
HEAVY-DUTYPX
SEPARATE AMP.PS
SELF-CONTAINEDPZ-GPZ-V/MPZ2PZ2-62PZ-101
AMP-IN-CABLEPQ
MULTI-VOLTAGEPW
PASSAGEPG
Black
Blue
Brown
12 to 24 VDC
Load
Mai
n ci
rcui
t
Sho
rt-c
ircui
tpr
otec
tion
circ
uit
Black
Blue
Mai
nci
rcui
t
Brown
12 to 24 VDC
LoadS
hort
-circ
uit
prot
ectio
n ci
rcui
t
Pink(Stop input light emission)
Blue
Mai
nci
rcui
t
Brown
12 to 24 VDC
Dimensions Unit: mm
Input/Output Circuits
Type ThrubeamRetro-reflective Diffuse-reflective
Polarised Long-range Short-range
ModelNPN PZ2-51 PZ2-61 PZ2-41 PZ2-42
PNP PZ2-51P PZ2-61P PZ2-41P PZ2-42P
Appearance
Detecting distance 7,000 mm 2,500 mm (with R-2) 600 mm (200 x 200 mm white mat paper)
100 mm (100 x 100 mm white mat paper)
Detectable object Opaque materials(8 x 8 mm min.)
Opaque materials(30 x 30 mm min.) Transparent and opaque materials
Hysteresis — 20% max. of detecting distance
Response time 1.5 ms max. 1 ms max. (2 ms in alternate frequency mode 1.)
Light source Visible red LED
Sensitivity adjustment 1-turn trimmer (240°)
Operation mode LIGHT-ON/DARK-ON (switch-selectable)
Indicators Output and power 2.: Red LED, Stable operation: Green LED
Control output NPN or PNP: 100 mA (40 V) max., Residual voltage: 1 V max.
Protection circuit Reversed polarity, overcurrent protection, surge absorber
Power supply 12 to 24 VDC ±10%
Current consumption T: 20 mA max.R: 25 mA max. 35 mA max.
Enclosure rating IP67
Ambient light Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature -20 to +55°C, No freezing
Relative humidity 35 to 85%, No condensation
Housing Glass-fibre reinforced plastic
Weight (including 2-m connector cable)
Transmitter/receiver:Approx. 50 g each Approx. 50 g
1. The different-frequency type has “D” at the end of the model No. PZ-41D(P)/42D(P)/61D only.2. The power indicator is equipped with the PZ2-51 only.
NPNPZ2-61/41/42/51 (Receiver)
PNPPZ2-61P/41P/42P/51P (Receiver) PZ2-51/51P (Transmitter)
9.5
11
4
14.54
Centre of emitted light
ø3.5, 3-core x 0.18 mm2
Cable length: 2 m
Centre ofreceived
light2 x ø3.2mountinghole
30
2.5 20
23
3
3
6 6 3.5
4.4
Indicator
Operation mode selector switch
Sensitivity adjustment trimmer
9.5
11
14.5
Centre of light
6 6 3.5
Attachment mounting trimmer Indicator
Sensitivity adjustment trimmer(Transmitter)
Operation mode selector switch (Receiver)
2 x ø3.2mountinghole
30
2.5 20
23
33ø3.5, 3-core x 0.18 mm2
Cable length: 2 m
60.6
14.55
118.2
14.520
377
309
39
21
23
2-M3 x 16
9.56.5
Indicator
PZ2 (with mounting bracket)PZ2-41(P)/42(P)/61(P) PZ2-51(P)
6.8
2
1
31
15.5D
0.51.02.0
5
11D
Attachment
PZ2-51(P) When attachment (A-3) is attached.
5
3.5
7
30
74 9
9 14.53.5
36 23
23
Material: Stainless steel
3
3
3.2
3.2
9.5
t=1.2
Mounting bracket (accessory)
t=1.6
2 x M3screw
Material: Stainless steelTwo nuts shown above are suppliedfor the thrubeam type.
*Supplied screws: M3 x 16: 2
Material: Stainlesssteel
2923
6
16.4
0.9 5 10
Lock
(1)
Connector
47
4761
30.4
2 x ø4.53040
51.2
51.2
25.6
3.5
5.58
31
31
21
2 x ø3.6
15
25
35
35
17.5
3.5
5.5
8
42
Reflector R-2 (accessory for PZ2-61)(OP-95388)
Reflector R-3 (optional)(OP-96436)
30
40
t=0.7
PRO reflection tape (optional)OP-96629
21
27
17.3
24.515.56.5
14.5
Supplied screws
21A
32
32
46
B11.8
21
216C
D
149
4726
13
13
10 5 x M3
ø10
23
23
45°
45°
2331
4 x ø7mountinghole
34
5.5Supplied screw Supplied
plate nut
3043
5
6.8
36
24.5
46
8.9
12.5
0.4
t=3.0
S-P01 HeadS-P01
S-P12
t=1.6
2 x M3screw
Material: Stainless steelTwo nuts shown above are suppliedfor the thrubeam type.
*Supplied screws: M3 x 16: 2
Material: Stainlesssteel
2923
6
16.4
0.9 5 10
Lock
(1)
Flat nut (accessory)
A B C D27 17.3 162 40.5
2-M3
14 11.5
11.6
36 34
3
25.4
2.6R-5
Specifications
212
PZ2 Self-contained Photoelectric Sensors
TECHNICAL GUIDE: P.754 CAD DATA Download: www.keyence.com.sg/CADG
212PH
OTOE
LECT
RIC
SENS
ORS
PHOTOELECTRICSELECTION GUIDE
CMOS LASERGV
COMPACT LASERLV-S/H
RGB COLOURCZ-V20
CZ
FLUORESCENCE DETECTION UV
CZ-H52
LUSTRE DETECTION
CZ-H72
HEAVY-DUTYPX
SEPARATE AMP.PS
SELF-CONTAINEDPZ-G
PZ-V/MPZ2
PZ2-62PZ-101
AMP-IN-CABLEPQ
MULTI-VOLTAGEPW
PASSAGEPG
213
Self-contained Photoelectric Sensors PZ2
TECHNICAL GUIDE: P.754 CAD DATA Download:www.keyence.com.sg/CADG www.keyence.com.sg
213Fibreoptic
Photoelectric
Proximity
Area Sensor
Pressure
Multi Function
High Precision
PLC/Touch Panel
Static Elimination
Vision System
Laser Marker
Barcode
Microscope
PHOTOELECTRICSELECTION GUIDE
CMOS LASERGV
COMPACT LASERLV-S/H
RGB COLOURCZ-V20CZ
FLUORESCENCE DETECTION UVCZ-H52
LUSTRE DETECTIONCZ-H72
HEAVY-DUTYPX
SEPARATE AMP.PS
SELF-CONTAINEDPZ-GPZ-V/MPZ2PZ2-62PZ-101
AMP-IN-CABLEPQ
MULTI-VOLTAGEPW
PASSAGEPG