q.5.26 november 2016 ke2 wifi service tool quick start guide

© Copyright 2016 KE2 Therm Solutions, Inc., Washington, Missouri 63090

Q.5.26 November 2016

KE2 WiFi Service Tool (pn 20906)

Quick Start Guide

The KE2 WiFi Service Tool is the simplest, most cost effective, way to access the Graphical User Interface (GUI) or webpages of the KE2 Evaporator Efficiency, KE2 Evap for Rack Efficiency or KE2 Controlled Environment.

The KE2 WiFi Service Tool should only be connected to individual or groups of KE2 Therm Ethernet enabled controllers with their fac-tory programmed IP address(es). They must also only be connected to the Refrigeration Network, and should not be connected to a

Powered by

KE2 WiFi Service Tool Kit (pn 20906) includes the WiFi Service Tool & AccessoriesPower Plug USB CableKE2 WiFi Service Tool RJ-45 Ethernet Cable

When connected to the controller, the KE2 WiFi Service Tool creates nearly instant wireless access to the webpages on the controller. Users can connect their cellphones, tablets, or laptop computers to the unsecured wireless network.

thermsolutions

Powered by

Internet

PowerEthernet

WiFi

Status Indicator

Bar

controller, or group of controllers, integrated into the customer’s existing network. The existence of multiple DHCP Servers can result in temporary network disruption.

Product Views

RESET

Returns the service tool to factory settings

Open the device and access battery RJ-45 Ethernet

PortUSB Port(Not Enabled)


KE2 WiFi Service ToolQuick Start Guide


5 Select KE2 ServiceTool from the list,

2 Using the power switch, turn ON the device.

3 Note: This button is disabled. It can be in any position and the KE2 WiFi Service Tool will function properly.

3G/4GWISPAP

POW

ER

ON

OFF

23

thermsolutions

Powered by

thermsolutions

ENTER

BACK

®

EfficiencyEvaporator

Press and hold for manual defrost

24-hour Emergency Technical Support1.888.337.3358

1 Using the RJ-45 cable (included with the KE2 WiFi Service Tool), connect the KE2 WiFi Service Tool to the controller.

5

6

4 To connect to the KE2 WiFi Service Tool, click the wireless connection icon in the bottom right hand corner of the computer screen. It will open a small window with a list of available networks.

6 Then, click Connect.




7 When the connection has been successfully made, the wireless network will indicated “No Internet, open.”

11 The browser will display the control-ler’s home screen (MasterView).

For detailed information about the MasterView screens see the following bulletin(s):Q.1.19 KE2 Evaporator Efficiency MasterView Screens

Q.1.38 KE2 Evap for Rack Efficiency Master View Screens

Q.1.28 KE2 Controlled Environment MasterView Screens.

IP-10.10.52.19MAC

00:04:A3:14:E5:92

IP-10.10.52.19MAC

00:04:A3:14:E5:92

7

9

11

8 Once connected to the device, launch the web browser of your preference, i.e. Google Chrome, Mozilla Firefox, Apple Safari, etc.

9 Find the IP address from the white label on the backside of the controller.

10 Enter the IP address of the controller into their web browser’s address bar and press enter.

© Copyright 2016 KE2 Therm Solutions, Inc., Washington, Missouri 63090Q.5.26 November 2016 supersedes Q.5.26 August 2013 and all prior publications



Hardware Specifications

Protocol StandardsUsing IEEE 802.11n technology;IEEE 802.11g, IEEE 802.11b;IEEE 802.3, IEEE 802.3u

Wireless Rate 150Mbps

Interface1 10/100M adaptive LAN / WAN port supports auto-flip (Auto MDI / MDIX)A USB 2.0 interfaceA Micro USB charging port

Push buttonPower switchMode select switch (Not Enabled)Reset button

LEDSystem status indicationBattery indicator

Antenna Built-in omni-directional antennaSize 3.9 in x 2.4 in x 0.6 in ; 99 mm x 61mm x 15mm (L x W x H)Radio ParametersOperating Mode AP (wireless AP) mode;Other

Packing Accessories

KE2 WiFi Service Tool;USB cable;120/240V power switching transformer;User Manual;

EnvironmentOperating temperature: 59°F to 104°F (15°C to 40°C);Storage temperature: -4°F to 122°F (-20°C to 50°C)

KE2 Therm Solutions 12 Chamber Drive. Washington, MO 63090

1-888-337-3358 . www.ke2therm.com

NOTE: With the onboard battery, the KE2 WiFi Service Tool provides hours of operation. The included USB cable may also be plugged into the 120V adapter for extended access.

ther

mso

luti

ons

Pow

ered

by

3G/4

GW

ISP

AP

POWER ON OFF

q.5.26 november 2016 ke2 wifi service tool quick start guide

Documents