q.c.m. camo plus ag · as a continuing airworthiness management organisation in compliance with...

3
Federal Office of Civil Aviation FOCA Schweizerische Eidgenossenschaft Confederation suisse Confederazione Svizzera Confederaziun svizra Swiss Confederation ------ _______ A member of the European Aviation Safety Agency --------Continuing Airworthiness Management Organisation ~pproval Certificate R-eference: CH.MG.7004 -------- Pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council and to Commission Regulation (EU) No 1321/2014 for the time being in force and subject to the condition specified below, the Federal Office of Civil Aviation hereby certifies: Q.C.M. CAMO PLUS AG Eichholzweg 20-24, CH-3123 8elp as a continuing airworthiness management organisation in compliance with Section A, Subpart G of Annex I (Part-M) of Regulation (EU) No 1321/2014, approved to manage the continuing airworthiness of the aircraft listed in the attached schedule of approval and, when stipulated, to issue recommendations and airworthiness review certificates after an airworthiness review as specified in point M.A.710 of Annex I (Part-M), and when stipulated, to issue permits to fly as specified in point M.A.711 (c) of Annex I (Part-M) of the same regulation. Conditions: _ _______ ..:1~.T~hiSapproval is limited to that specified in the scope of approval section of the approved continuing airworthiness .. ana ement exposition as referred to in Annex I (Part-M), Section A, Subpart G of Regulation (EU) No 1321/2014. 2. This approva requir-es...compliance with the procedures specified in the Annex I (Part-M) to Regulation (EU) 1321/2014 approved continuing airwortniness management organisation exposition. ------ _ _]3" ..This approval is valid whilst the approved continuing airworthiness management organisation remains in compliance with Ann Jrl-(.f2ad-M) to Regulation (EU) No 1321/2014. 4. Where the continuing-airworthiness management organisation contracts under its Quality System the service of an/several _____ organisation(s), this approval remains valid subject to such organisiltion(s) fulfilling applicable contractual obligations. 5. b'ect to compliance with the previous conditions, this approval shall remain valid for an unlimited duration unless the approvai has previously been surrendered, superseded, suspended or revoked. -----------gate of original issue: Date of this revision: 02.06.2009 11.01.2017 ~,1t;J Head of Section Technical Organisations Zurich Gianmario Giacomelli Vice Director Head of Safety Division Aircraft - ASA Form 14

Upload: ngokhuong

Post on 05-Apr-2018

220 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Q.C.M. CAMO PLUS AG · as a continuing airworthiness management organisation in compliance with Section A, Subpart G of Annex I (Part-M) of Regulation (EU)

Federal Office of Civil Aviation FOCA

Schweizerische Eidgenossenschaft

Confederation suisse

Confederazione Svizzera

Confederaziun svizra

Swiss Confederation

------_______ A member of the European Aviation Safety Agency

--------Continuing Airworthiness Management Organisation

~pproval CertificateR-eference: CH.MG.7004--------Pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council and to CommissionRegulation (EU) No 1321/2014 for the time being in force and subject to the condition specified below, the FederalOffice of Civil Aviation hereby certifies:

Q.C.M. CAMO PLUS AGEichholzweg 20-24, CH-3123 8elp

as a continuing airworthiness management organisation in compliance with Section A, Subpart G of Annex I(Part-M) of Regulation (EU) No 1321/2014, approved to manage the continuing airworthiness of the aircraft listedin the attached schedule of approval and, when stipulated, to issue recommendations and airworthiness reviewcertificates after an airworthiness review as specified in point M.A.710 of Annex I (Part-M), and when stipulated,to issue permits to fly as specified in point M.A.711 (c) of Annex I (Part-M) of the same regulation.Conditions:________ ..:1~.T~hiSapproval is limited to that specified in the scope of approval section of the approved continuing airworthiness

.. ana ement exposition as referred to in Annex I (Part-M), Section A, Subpart G of Regulation (EU) No 1321/2014.2. This approva requir-es...compliance with the procedures specified in the Annex I (Part-M) to Regulation (EU) 1321/2014

approved continuing airwortniness management organisation exposition.------ _ _]3" ..This approval is valid whilst the approved continuing airworthiness management organisation remains in compliance with

Ann Jrl-(.f2ad-M) to Regulation (EU) No 1321/2014.4. Where the continuing-airworthiness management organisation contracts under its Quality System the service of an/several

_____ organisation(s), this approval remains valid subject to such organisiltion(s) fulfilling applicable contractual obligations.5. b'ect to compliance with the previous conditions, this approval shall remain valid for an unlimited duration unless the

approvai has previously been surrendered, superseded, suspended or revoked.

-----------gate of original issue:

Date of this revision:02.06.200911.01.2017

~,1t;JHead of SectionTechnical Organisations Zurich

Gianmario GiacomelliVice DirectorHead of Safety Division Aircraft

-ASA Form 14

Page 2: Q.C.M. CAMO PLUS AG · as a continuing airworthiness management organisation in compliance with Section A, Subpart G of Annex I (Part-M) of Regulation (EU)

Schweizerische Eidgenossenschaft

Confederation suisse

Confederazione Svizzera

Confederaziun svizra

Swiss Confederation

Federal Office of Civil Aviation FOCA -----Continuing Airworthiness Managemem Organisafl

Approval Schedule Reference CH.MS.-'

~fganisation name: a.C.M. camo plus AG

Aircraft type I series I group Airworthiness Permits to flyreview authorised authorised

Yes No

Yes No

i Yes No

! Yes No

Yes No

Yes No

i Yes NoI

Yes No

Organisation(s) working under the quality system

AS50

ATR Series

Beechcraft Series

Boeing Series

________

single pistonmax.5700k MTOW~------------------~----------~----------~----------------------------------------~TBM7

----------------

Bom'bardier ChallengerSeriesBombardier OH8 series Yes No

Yes No

Yes No

Yes No

Yes No

Yes No

Yes No

Yes No

Yes No

Yes No

Yes No

Yes No

i Yes No!

i Yes No!

I Yes No

I Yes No

I Yes No,

Yes No,I

Yes No

Yes No

I Yes ! No

Yes No

Yes No

Yes No

Yes No

Bombardier GlobalSeriesC208

Cessna Series Turbine

0228

0328

Oassault Falcon Series

OHC6

Embraer Series

F100

Gliders

Gulfstream Series

Hawker Series Turbine

Learjet Series

Motor Gliders

multiple pistonmax.5700k MTOWP180

P46T

PC12

PC6T

SB20

SF34

TBM8

This approval schedule is limited to that specified in the scope of approval in Annex I (Part-M), Sec'G of Regulation (EU) No 1321/2014 approved Continuing Airworthiness Management ExAppendices Chapter 5.

EASA Form 14

Page 3: Q.C.M. CAMO PLUS AG · as a continuing airworthiness management organisation in compliance with Section A, Subpart G of Annex I (Part-M) of Regulation (EU)

..•----._~"-""'-

---------_._------._'- ..•. -.,..._.. -----_.~~.-__ . "_ '"- ..•.. ----..-....._ ---.. _

. '" --. - ""'. -------------_~ .__. Continuing Airworthin~ss Mana'gement9rganisalloR-__ --

,,,_ "- -.... .. .. '-'" " - "'''''' --..-.._.--_._-.... -----_- ..•.__

------ ..-- - Approval Schedule Reference CH:MG ZQ04 -..-.- ------ ..__ .. ._~...-~--

......._-._---------_. ------

Schweizerische EidgenossenschaftConfederation suisse

Confederazione Svizzera

Confederaziun svizra

Swiss Confederation '-._Federal Office of Civil Aviation FOCA

-----_ .·---....-·Bfgaoi~.?tion name:--- _

-"_''''''-- -Ai[,<"a!~t~pe I series I group

Q.C.M. camo plus AG

~- --.-~...•--...

-'-"--CoRtinu~ng Airworthiness Management Exposition Reference: CAME Q.C.M. camo plus AG

Airworthinessreview authorised

Permits to flyauthorised

Organisation(s) working under the quality system

------.--- ..----·- .."-- ...,pate of original issue:

~ __.. D~fe'ofthis revision:--~"- --~-~-.----- -- ..

'-----~--..--.--~.--•..- ,~ ...._- .-.

01.05.200801.01.2017

~ Gianmario Giacomelli_·_-- -Vice..·DirectorHead of Safety Division Aircraft

~&~IRonald MeierHead of SectionTechnical Organisations ZOrich

Issue 8 / Amdt 0

-------.-.._~---.._-....

--.._---------------_ •..•--.._---._- .._ ..

EASA Form 14