qtrak wheel loader
DESCRIPTION
Handling, Power, Versatility. Revision 01TRANSCRIPT
WHEEL LOADER1200 - 1500 SERIES
ENGL
ISH
RELIABILITY AND AUTONOMYEasy access to the engine compartment.High quality components and wide fuel tank.
POWERPowerful 50 hp Yanmar engine with direct injection. Granted reliability.
STABILITYOne-piece frame with four steeringwheels that improves balance andoverall stability with a high constantpayload in all contexts.
TRANSMISSIONThe hydrostatic transmission is electronically controlled with Eco/Power program.
COMFORTEfficient 3-speed heating system and ventilation system with air recirculation mode.Doorways on either sides.Ergonomic driver seat with adjustable suspension, safety belt, weight adjustment, backrest and longitudinal adjustment.
Handling Power Versatility
1 - 2
123512401550
SUPER HI-FLOW CIRCUITHi-flow circuit for attachments.
VISIBILITY AND SAFETYROPS and FOPS soudproof
cabin with large insulated windows on all sides, also on
the roof (provided with an efficient protective grille).
STRONG BOOMIt has a significant length which
allows to reach the farthest points and also not easily
accessible areas.
Handling4-Wheel Steer: high manoeuvrability Widefieldofview: great visibility One-piece chassis: maximum stability
3 - 4
FRONT WHEEL STEERING (OPTIONAL)
CRAB STEERING
ALL WHEEL STEERING
PowerStrong boom: solidity means safety
Hydrostatic power: fast and powerfull Yanmar engine: power and low fuel consumption
POWERED BY
MADE IN JAPAN
5 - 6
Yanmar Clean Diesel Technologies:- Direct injection to create clean-burning power.- Common rail system to allow fine-tuned electronic control of fuel injection.- Fully-electronic control to provide total intelligent engine control.
VersatilityOriginal attachments: great versatility to increase productivity
Automatic Coupling Plate: quick and easy attachment change Dashboardandmultifunctionaljoystick: everything under control
7 - 8
CONCRETE MIXING BUCKET
LOG GRAB FOR FORKS
CEMENT MIXER
HIGH PRESSURE WASHER
Original Attachments
9 - 10
ROTARY BROOM
SWEEPER
FLAIL MOWER
SNOW PLOW
MANURE FORK
STREET WASHER
BALE GRABBER
MULTIPURPOSE BUCKET
GRAPPLE BUCKET
LAWN MOWER
Original Attachments
11 - 12
MULTIPURPOSE BUCKET
PALLET FORKS
TRAILER
SIDE FLAIL MOWER
Original Attachments
SNOW BLOWER
GRAPPLE BUCKET
BACKHOE
FED
L
G
C
B
A
MN
H
ED F
L
G
C
B
A
M
N
H
1550
1235 / 1240 / 1240 DV
mm
G Throwing Distance 215
H Machine Height 2008
I Ground Clearance 270
L Machine Length 3898
M Bucket Width 1265
N Machine Width (27x8.50-15 tyres) 1232
mm
A Bucket Pivot Point 2771
B Bottom Bucket Height 2645
C Dump Height 2253
D Front Length 1322
E Wheel Base 1499
F Rear Length 1080
mm
A Bucket Pivot Point 3202
B Bottom Bucket Height 2982
C Dump Height 2581
D Front Length 1593
E Wheel Base 1720
F Rear Length 1275
mm
G Throwing Distance 167
H Machine Height 2488
I Ground Clearance 430
L Machine Length 4588
M Bucket Width 1665
N Machine Width (With 10,5X18 Tyres) 1450
13 - 14 - 15
OPERATIONAL DATA 1235 1240/1240DV 1550Bucket capacity 0,35 / 0,41 m³ 0,65 / 0,85 m³
Weight 1900 kg 3380 kg
ENGINEManufacturer YANMAR 3TNV82 YANMAR 3TNV88 YANMAR 4TNV88
Type diesel engine, 3-cylindersin line water cooled, direct injection
diesel engine, 4-cylinders in line water cooled,
direct injection
Output 35 HP (26 kW)@ 3180 rpm
41 HP (31 kW)@ 3210 rpm
50 HP (37 kW)@ 3210 rpm
Max. torque 87 N*m @1200 rpm 108 N*m @ 1200 rpm 143 N*m @1200 rpm
Engine displacement 1331 cc 1642 cc 2190 cc
Emissions tested and certified as per 97/68 CE, EPA: Interim Tier 4 – EC: Stage 3A
POWER TRANSMISSION
Drive hydrostatic transmission with piston pump,inching pedal
hydrostatic trasmission with electronic control
and ECO/POWER, inching pedal
Speed 0-20 km/h - (0-12 km/h; 0-25 km/h double speed) 0-20 km/h
Axles Direct Drive wheel motor, steering typeSteering axles with
gearbox
Service brake Hydrostatic
Parking brake Disc brakes on rear motors Disc brake on center axle
Standard tyres 27x8.50-12 10PR 10,5 - 18 12PR
STEERING AND WORK HYDRAULICSSteering 4 wheel steering
Steering types 3: all-wheels, front-wheels and crab
Max. steering angle 38°
Flow rate 40 l/min 71 l/min
Pressure 240 bar
Relief and protection valves 3 4
KINEMATICSLinkage Z type linkage, parallel geometry
Lifting force 19,5 kN 28,5 kN
Tilting 16 kN 28,0 kN
Lifting time 6,0 s. 4,2 s.
Lowering time 4,1 s. 3,1 s.
Roll back time 1,1 s. 1 s.
Dump time 1 s. 0,8 s.
Tipping load (standard bucket) 1600 kg 2550 kg
Tipping load (pallet fork) 1450 kg 2200 kg
Safe working load s=1,25 (forks) 1280 kg 2040 kg
Safe working load s=1,67 (forks) 960 kg 1527 kg
Safe transport load s=1,25 (forks) 1160 kg 1760 kg
Digging depth 50 mm
CAPACITIESFuel tank 56 l 80 / 180 l
Hydraulic fluid tank 44 l 85 l
Noise emissions as per 2000/14/EC
ELECTRIC SYSTEMOperating voltage - current 12V DC - 60A
OPTIONS • Cabin with heating system• Road lights• Trailer coupling• Super Hi-Flow• Rear hydraulic outlet• Back weights 285 kg
• Automatic air conditioning
• Trailer coupling• Super Hi-Flow (100 l/min)• Hydraulic rear outlet
Handling - Power - Versatility
Dealer
The information and images in this document are provided for illustrative purpose only and do not bind the manufacturer, who reserves the right to make modifications at any time without prior warning.
CSF srlVia palù 6-836040 Grumolo delle AbbadesseVicenza - ItalyTel. +39 0444 264600Fax +39 0444 [email protected]
DEPL\2014_MONO_QTRAK_01_EN