Bolt Tension | Anti-Vibration | Product Reliability | Traceability

QUALITY FASTENERS SINCE 1935hobson.com.au

PRODUCT DATAPantha Plug® Nylon and Metal

Disclaimer: While every reasonable effort has been made to ensure that this document is correct at the time of printing, Hobson Engineering, its agencies and employees, disclaim any and all liability to any person in respect of anything or the consequences of anything done or omitted to be done in reliance upon the whole or any part of this document.

1911

251D

S

Phillips

• Effective drill point for easy installation and penetration of plasterboard.

• Coarse thread profile to cut and grip plasterboard.

• Flat-low profile head allows for flush fixing.• Phillips Drive (#2) for quick installation.

Features

The Pantha Plug® is a self-drilling; light duty anchor for plasterboard. It offers fast and easy installation and can also be removed quickly when required. Accomodates screws of many lengths.

L

D2 D3

D1

Applications Trades

• Wall mounting • Electrical fittings and control boxes • Light fixtures• Alarm systems• Brackets• Kitchen fittings

• Plumbers• Electricians • Builders

Material and Finish Nylon

Material Carbon Steel

Finish Zinc Plated

Installation

Part QFind Length Diameter 1 Diameter 2 Diameter 3 Use with Screw Gauge

Phillips Drive Pack Qty

L (mm) D1 (mm) D2 (mm) D3 (mm)

MWPPP#080043 MWP129 43 6.9 8.2 14 8G* #2 100

*recommended

Pantha Plug® Metal

Pantha Plug® Nylon

Part QFind Length Diameter 1 Diameter 2 Diameter 3 Use with Screw Gauge

Phillips Drive Pack Qty

L (mm) D1 (mm) D2 (mm) D3 (mm)

MWPPM#080043 MWP128 43 6.5 7.7 11.8 8G* #2 100

*recommended

about our...

DID YOU KNOW?

Bolt Tension | Anti-Vibration | Product Reliability | Traceability

QUALITY FASTENERS SINCE 1935hobson.com.au

WALL KATT UNIVERSAL PAN - PHILLIPS AND SQUAREZINC PLATED (ROHS COMPLIANT)

Part Qfind Drive DriveSize Size Length Pack

(mm) (mm) (Qty)

MWKXZPP65032 MWK102 Phillips #2 6.5 32 100

MWKXZPQ65032 MWK100 Square #2 6.5 32 100

1906

211D

YK

WALL KATT™ UNIVERSAL PAN - PHILLIPS AND SQUARE

Phillips Square

• Electrical Conduit Saddles

• Pipe Saddles

• Lighting Fixtures

• Signage

• Plasterboard (Gyprock)

• Wood

• Brick / Hollow Concrete Blocks (Pre-Drilling Required)

• Downpipes and Guttering systems

Application:

Suitable for a wide range of applications such as HVAC fixtures, electrical fixtures, smoke detectors, telecommunications equipment, bathroom accessories, plumbing fixtures, shelving and supports, mirrors and picture frames, closet organisers, signs and bulletin boards.

INFLUENCES ON FIXING PERFORMANCE

84

26 9 HOLLOW WALL ANCHOR

26.12 PRODUCT DESCRIPTIONThe Macsim Hollow Wall Anchor is a four/ five arm metal cavity wall anchor, which gives maximum possible strength by unfolding and keying on to large area behind plaster or wall board. Choose the correct size to suit the wall thickness and diameter of the screw required. The strength is largely dependant on the wall board.

26.15 ADVANTAGES• Maximum Strength (depending on

wall board)

• Unfolding feature

26.13 INSTALLATION METHOD1. Drill correct diameter hole in plaster or wall board. 2. Insert the assembled screw and body until lugs underside of head

engage. Either apply the special expansion tool or carefully tighten screw until the body has fully expanded, ensuring the body does not rotate. In weaker substrates the tool will be required.

26.14 APPLICATIONS• Hollow Wall Applications

• Wall Board

26.11 PRODUCT DATA

PRODUCT DATA

CodeScrew Size

Hole Diameter

(mm)Wall Thickness

(mm)Min. Cavity Depth (mm)

ScrewLength(mm)

09405 M4 8 1 -5 30 40

09409 M4 8 5-10 30 45

09415 M4 8 3-20 45 55

09416 M4 8 10-16 45 50

09423 M4 8 16-23 50 60

09438 M4 8 23-38 60 75

09510 M5 11 5-10 35 45

09516 M5 11 10-16 45 50

09527 M5 11 16-32 50 75

09616 M6 13 10-16 35 45

09627 M6 13 16-32 60 75

09410* M4 6.5 3-10 30 40

* Crown Anchor

MACSIMM10

MACSIMM10

MACSIMM10

MACSIMM10

Head Type: • Pan• Phillips Drive Material Coating: • Yellow Zinc Plated (Pictured)

85

PRODUCT DATA

9 26 HOLLOW WALL ANCHOR

HOLLOW WALL FIXINGS

26.16 MATERIAL SPECIFICATIONS

CODE Size Screw Head Body Specification Screw

094/5/6 All Machine ph Steel YZP Steel ZP. Pass

09410 M4 x 6.5 Machine ph Aluminium Aluminium

26.17 TECHNICAL SPECIFICATIONS

CODE Size

Advisory SWL Tension

Plasterboard10mm N

Advisory SWL Tension Plasterboard

13mm N

Advisory SWL Tension Plywood10mm N

Advisory SWL Shear

N094** 4mm 100 150 300 n/a

095** 5mm 100 200 400 n/a

096** 6mm 150 220 500 n/a

09410 4mm 100 n/a 200 n/a

87

PRODUCT DATA

28.12 PRODUCT DESCRIPTIONThe Macsim Spring or Gravity Toggle Anchors are designed to provide maximum power in cavity plasterboard walls. These are supplied with both Pan and Countersunk Screws for fixture attachment.

28.15 ADVANTAGES• Easy Installation

• Superior Holding Power

28.13 INSTALLATION METHODSPRING TOGGLE1. Drill a clearance hole in the plaster or wall board.2. Insert assembled screw and compressed body through fixture and into

hole. Ensure the toggle has fully passed into the cavity and pull to ensure wings have opened.

3. Tighten screw to desired position. Do not remove screw or the toggle will be lost.

GRAVITY TOGGLE1. Drill a clearance hole in the plaster or wall board.2. Insert assembled screw and compressed body through fixture and into

hole. Ensure the toggle has fully passed into the cavity and has dropped down. Tighten screw to desired position. Do not remove screw or the toggle will be lost.

28.14 APPLICATIONS• Plasterboard

• Wall Board

28.11 PRODUCT DATA

9 28 METAL TOGGLE ANCHOR

HOLLOW WALL FIXINGS

Code

Size

Advisory SWL Tension

Plasterboard10mm N

Advisory SWL Tension

Plasterboard10mm N

Advisory SWL Tension Plywood10mm N

Advisory SWL Shear

N Material07S3 1/8” 100 150 300 n/a steel YZP

07S5 3/16” 100 200 400 n/a steel YZP

07S6 1/4” 100 220 500 n/a steel YZP

07G3 1/8” 100 150 300 n/a steel YZP

07G5 3/16” 100 200 400 n/a steel YZP

MACSIMM10

MACSIMM10

MACSIMM10

Head Type: • Round• Countersunk• HookMaterial Coating: • Yellow Zinc Plated (Pictured)