quality control total quality management tqm quality circles

Upload: kiran-soni

Post on 14-Apr-2018

237 views

Category:

Documents


1 download

TRANSCRIPT

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    1/19

    Quality Control Total Quality Management TQM Quality

    Circles

    1. Introduction to Quality

    Every manufacturing organisation is concerned with the quality of its product. While it is

    important that quantity requirements be satisfied and production schedules met, it is equally

    important that the finished product meet established specifications. Because, customer's

    satisfaction is derived from quality products and services. Stiff competition at national and

    international level and consumer's awareness require production of quality goods and services

    for survival and growth of the company. Quality and productivity are more likely to bring

    prosperity into the country and improve quality of work life.

    However, the management looks to achieve customer satisfaction by running its business at thedesired economic level. Both these can be attained by properly integrating quality development,

    quality maintenance and quality improvement of die product. The integration of these three

    aspects of a product can be achieved through a sound quality control system.

    http://kalyan-city.blogspot.com/2010/07/quality-control-total-quality.htmlhttp://kalyan-city.blogspot.com/2010/07/quality-control-total-quality.htmlhttp://kalyan-city.blogspot.com/2010/07/quality-control-total-quality.htmlhttp://lh5.ggpht.com/_iFIztPmvqg8/TDXp-2Ow1NI/AAAAAAAAC_k/iil24IkCZek/Quality-Control-Total-Quality-Management-TQM.jpghttp://lh5.ggpht.com/_iFIztPmvqg8/TDXp-2Ow1NI/AAAAAAAAC_k/iil24IkCZek/Quality-Control-Total-Quality-Management-TQM.jpghttp://kalyan-city.blogspot.com/2010/07/quality-control-total-quality.htmlhttp://kalyan-city.blogspot.com/2010/07/quality-control-total-quality.html
  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    2/19

    2. The Meaning of Quality

    Quality is a relative term and it is generally used with reference to die end use of the product. For

    example, a gear used in sugarcane juice extracting machine may not possess good surface finish,

    tolerance and accuracy as compared with the gear used in the head stock of a lathe, still it may be

    considered of good quality if it works satisfactorily in die juice extracting machine. The quality

    is thus defined as die fitness for use/purpose at die most economical level.

    The quality depends on die perception of a person in a given situation. The situation can be user-

    oriented, cost-oriented or supplier-oriented. Since, die item is manufactured for me use of die

    customer, die requirements of die customer dictates die quality of die product. Quality is to be

    planned, achieved, controlled and improved continuously.

    The word "Quality" has variety of meanings :-

    1. Fitness for purpose : The component is said to possess good quality, if it works well inthe equipment for which it is meant. Quality is tiius defined as fitness for purpose.

    2. Conformance to requirements : Quality is die ability of the material/component toperform satisfactorily in an application for which it is intended by die user. Quality of a

    product, thus, means conformance to requirements. Customer needs have to be assessed

    and translated into specifications depending upon die characteristics required for specific

    application. Just as every human has his own characteristics every application has its own

    characteristics.

    3. Grade : Quality is a distinguishing feature or grade of the product in appearance,performance, life, reliability, taste, odor, maintainability etc. This is generally called as

    quality characteristics.4. Degree of preference : Quality is the degree to which a specified product is preferred

    over competing products of equivalent grade, based on comparative test by customers,

    normally called as customer's preference.

    5. Degree of excellence : Quality is a measure of degree of general excellence of theproduct.

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    3/19

    6. Measure of fulfillment of promises : The quality of a product is a measure of fulfillmentof the promises made to the customers.

    1. Suitability : For specific application.2. Reliability : It should give efficient and consistent performance.3. Durability : It should have desired life.4. Safety : Safe and foolproof workability.5. Affordability : It should be economical.6. Maintainability : It should be easy to maintain.7. Aesthetic look: It should look attractive.8. Satisfaction to customers : It should satisfy the customers' requirements.9. Economical : It should have reasonable price.10.Versatility : It should serve number of purposes.

    A product can be said to possess good quality if all the above requirements are properly

    balanced while designing and manufacturing it.

    3. Quality Control

    Control can be defined as "a process by means of which we observe the actual performance and

    compare it with some standard".

    If there is a deviation between the observed performance and the standard performance then it is

    necessary to take corrective action.

    The term "Quality Control" has variety of meanings :

    1. Quality control is the process through which we measure the actual quality performance,compare it with the standards and take corrective action if there is a deviation.

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    4/19

    2. It is a systematic control of various factors that affect the quality of the product. Itdepends on : Material, Tools, Machines, type of labour, working conditions, measuring

    instruments, etc.

    3. Quality control can be defined as the entire collection of activities which ensures that theoperation will produce the optimum quality products at minimum cost.

    4. It can also be defined as the tools, devices or skills through which quality activities arecarried out.

    5. It is the name of the department which devotes itself full time to quality functions.6. The procedure for meeting the quality goals is termed as quality control.7. It is a system, plan or method of approach to the solution of quality problems.8. As per A.Y. Feigorbaum

    Total Quality control is "An effective system for integrating the quality development,

    quality maintenance and quality improvement efforts of the various groups in

    anorganization, so as to enable production and services at the most economical levels

    which allow full customer satisfaction."

    4. Steps In Quality Control Programme

    1. Formulate quality policy.2. Work out details of product requirements, set the standards (specifications) on the basis

    of customers preference, cost and profit.

    3. Select inspection plan and set up procedure for checking.4. Detect deviations from set standards or specifications.5. Take corrective action through proper authority and make necessary changes to achieve

    standards.

    6. Decide on salvage method i.e. to decide how the defective parts are disposed of, entirescrap or rework.

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    5/19

    7. Co-ordination of quality problems.8. Developing quality consciousness in the organization. Quality control is not a function of

    any single department or a person. It is the primary responsibility of any supervisor to

    turn out work of acceptable quality.

    Quality control is one aspect of production planning and control. It is basically concerned with

    the quality production through regular inspection technique. Quality is a combination of

    characteristics pertaining to the manufacture of the product and control is the correction in the

    quality of the product, when the deviations in the product are more than expected. A good quality

    item is one which conforms to some standard specifications . These specifications are determined

    by the expectations of consumers and also by the availability and costs of processes and

    materials.

    To most people, quality is variable. It is subjectively judged because it deals with the relative

    goodness of a product. When a buyer boasts that his house or car is the best, it implies high

    quality. Quality is thus subjective and vaguely measurable.

    In the words of Broom,

    "subjective quality refers to degree of goodness of a product and objectively it consists of a set of

    measurable characteristics for which standard dimensions together with small, allowable

    departures, up and down, may be prescribed."

    All manufacturing processes face a basic difficulty. It is physically impossible to make all items

    or units exactly alike. There is always variability in the product. With precision manufacturing,

    the variability may be difficult to see but nevertheless it is there. When variability becomes

    obvious it results in scraps, re-work and losses, thus adding to the costs.

    5. Objectives of Quality Control

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    6/19

    1. Establishment of quality standard : The main objective of quality control is theeconomical production of a high quality product at the quality level the customer wants.

    It is basically for eliminating variations in production and in order to have uniformity in

    production.

    2. Locating quality deviations : It is necessary to analyze the trend and extent of qualitydeviations in a manufacturing process. Such deviations should be explained by statistical

    techniques when they cannot be attributed to the element of chance.

    3. Evaluating methods and processes of production : By evaluating methods andprocesses of production, quality control helps to take corrective measures to maintain the

    quality of the product during the process of manufacture.4. Quick sale of quality goods : Quality control accelerates the sale of the goods by

    supplying only the quality goods in the market. Consumers also support quality goods.

    5. Production of standard quality goods : Quality control aims at manufacturing standardquality products and avoids the production of inferior quality goods. Such standard

    quality goods give satisfaction to consumers and also create goodwill in the market.

    6. Improvement in quality : One objective of quality control is to find out high qualitystandards and to make constant efforts to reach those standards. Quality control aims at

    creating quality consciousness at all levels in the Organisation.

    6. Steps In Quality Control Process

    1.

    Devising control over raw materials : The quality of the finished product is determinedmostly by the quality of raw materials. It calls for close connection between the raw

    material purchase department of the company and the vendors. As and when necessary, a

    resident inspector may be deputed by the Quality Control Department in the vendor's

    place to see that only goods in accordance with specifications are supplied. It is advisable

    to reinspect the raw materials before putting them to actual use.

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    7/19

    2. Fixing standards and specifications : In order to make any scheme of quality controlsuccessful, it is essential to predetermine standards and specifications. The practice

    should be to provide quality instructions in the form of drawings, showing shapes,

    dimensions and specifications describing color, strength, thickness, chemical

    composition, etc.

    3. Exercising control over production operations : In order to execute efficient practices,the technical expert of the Quality Control Department must investigate, from time to

    time, the operating methods. Such investigation helps to eliminate all possible variables.

    4. Locating inspection points : When the points at which defects occur are wrongly locatedor located with delay, it hinders quality control. Therefore there should first inspection of

    the raw materials at the vendor's places, then at the company's plant, then at the various

    points during the process of production and finally at the time of packing. The defects are

    likely to occur at these points. The finished goods can be cleared after obtaining 'O.K.' or

    'All Correct' from the Quality Control Department.

    5. Maintaining quality of equipments : The final quality of the products is conditioned bythe quality of the equipments and other devices used. The Quality Control Department is

    responsible for testing the equipment used in inspection such as gauges, which measure

    dimensions, electronic devices, magnetic devices and industrial radio graphical

    instruments.

    6. Maintaining records : The Quality Control Department is responsible for maintainingall records relating to quality inspection and control and the number rejected.

    7. Advantages of Quality Control

    Quality control is important as it offers certain advantages to the manufacturer. Such advantages

    are: stability to sale, goodwill in the market, ability to face market competition effectively,

    reduction in production costs, and elimination of wastage due to rejections and uniformity in

    production. These benefits are important for sales promotion and profit maximization.

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    8/19

    Manufacturers now give special attention to quality control techniques for long term benefits.

    Attention is given to research and development activities for this purpose. Even foreign

    collaborations are made for raising the quality standards of products manufactured. In brief,

    quality control is a matter of great importance in production management.

    The benefits of quality control to consumes are: Availability of standard quality and reliable

    goods, proper reward for the price paid, safety to life and health, better standard of living and

    protection against substitution or adulteration and quick shopping of goods. Consumers always

    purchase standard quality goods even by paying a little higher price as they get full satisfaction

    over a long period from quality goods. Consumers, particularly educated consumers, support

    quality products as they know the benefits available from such standard quality products. This

    suggests the importance of quality control from the point of view of consumers.

    The importance of quality control is, now, accepted even at the global level. Consumers now

    insist for superior quality goods. Expenditure on quality control is an investment for more sale

    and satisfaction to consumers. Quality control is a must for export promotion. Companies can

    capture foreign markets only by manufacturing superior quality goods at reasonable cost of

    production. Japan is a leading world exporter. This is mainly due to superior quality of goods

    manufactured in Japan. Governments in many countries support quality control measures. They

    provide all possible help for maintaining superior quality of goods. Restrictions are also imposed

    on the manufacturing of cheap goods. Even associations of manufacturers and traders support

    quality control measures. This suggests the importance of quality control in business.

    In addition, the following advantages of quality control also suggest its importance:

    1. Improvement in the quality of production and reduction in the production cost.2. Uniformity in the production and supply of standard quality goods to consumers.3. Offering full return of the price paid by consumers and giving convenience and

    satisfaction to consumers. This also develops cordial relations with consumers.

    4. Reduction in spoiled production and rejection from consumers and dealers.5. Promotion of exports due to superior and standard quality production.6. Sales promotion in the internal market and facing market completion with confidence.

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    9/19

    7. Reduction in the inspection cost.8. Improvement in the productivity and motivation of employees.9. Making the products popular in the market and thereby to develop market goodwill.

    8. Cost of Quality

    The costs of carrying out company quality program are known as "Cost of Quality". It includes :-

    1. Market research cost of discovering quality needs of customer.2. Product research and development cost of creating a product concept, which will meet

    quality needs.

    3. The design cost of transmitting product concept into information which representsplanning for manufacturer.

    4. Cost of inspection and test.5. Cost of defect prevention.6. Cost of quality assurance.7. Cost of scrap and quality failure.8. The quality cost can be defined in four categories :-

    a. Cost of prevention.b. Cost of appraisal.c. Cost of internal failures.d. Cost of external failures.

    8.1 (a) Cost of Prevention

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    10/19

    It consists of costs associated with person engaged in designing, implementing, maintaining the

    quality system. Cost of prevention includes:-

    i. Cost of Quality planning : It includes the cost associated with creating a overall qualityplan, the cost of market research and product development, inspection plan, reliability

    plan etc.

    ii. Cost of Documenting : It includes cost of preparation of manuals and procedures tocommunicate these costs.

    iii. Process control cost : Used with quality plans procedure to achieve fitness for use.iv. Cost of training : Cost associated in preparing any programs for attaining, improving,

    maintaining quality programs.

    v.

    Cost associated with preventing recurring defects : Engineering, technical,supervisory, cost of preventing recurring defects.

    vi. Cost of investigation, analysis of correction of causes of defects by quality centraldepartment.

    vii. Cost of investigation, analysis of correction of causes of defects by engineering controldepartment.

    viii. Cost of consciousness programs.

    8.2 (b) Cost of Appraisal

    Costs associated with measuring, evaluating or auditing the products, component and purchase

    materials to assure conformance with quality standard and performance requirement are called as

    "Cost of appraisal".

    In other words, the cost of evaluating, quality and of identifying and segregating non-conforming

    part and assemblies.

    This consist costs of :-

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    11/19

    1. Receiving or incoming tests and inspection.2. Laboratory and acceptance test.3. Inspection and test.4. Checking labor.5. Set up for inspection and test.6. Inspection of test material.7. Quality Audits.8. Review of test and inspection data.9. Evaluation of field stocks, spare parts.

    8.3 (c) Cost of internal failures

    The costs associated with defective products, components, materials that fail to meet quality

    requirements and results in manufacturing losses are called as "Cost of internal failures".

    Costs associated with scrap i.e. Cost of material, labor. Cost of rework, repair i.e. Cost of making

    defective parts and assembly rules.

    Cost of re-inspection and re-test after defective parts are repaired. Costs associated with material

    review activity.

    Cost of processes yield lower that might be attainable by improved controls. Trouble shooting.

    8.4 (d) Cost of External Failures

    Cost because of defective products being shifted to the customer.

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    12/19

    1. Cost of processing complaints from the customer.2. Cost of service to customer to receive defective items.3. Cost of inspecting, preparing defective items.4. Cost of replacing defective products.

    9. The Concept of Total Quality Management (TQM)

    Total quality management is a comprehensive concept and not related only to the quality of

    goods and services. It suggests that high quality standards (e.g., ISO 9000) should be maintained

    in other aspects of management such as production cost, marketing, sales promotion, etc. For

    such quality/efficiency in all aspects of business management, consciousness/awareness needs to

    be developed at all levels and among employees working in all departments of the enterprise.

    Employees must be motivated for maintaining high quality standards. In addition, their

    cooperation/involvement is necessary for maintaining efficiency in all aspects of business

    management. In brief, quality management is not the responsibility of management alone.

    Participation/involvement of both parties (management and employees) is essential for

    achievement of quality and other benefits.

    http://lh5.ggpht.com/_iFIztPmvqg8/TDXr-3tMbsI/AAAAAAAAC_s/r2MRETKVa8s/Total-Quality-Management-TQM.jpghttp://lh5.ggpht.com/_iFIztPmvqg8/TDXr-3tMbsI/AAAAAAAAC_s/r2MRETKVa8s/Total-Quality-Management-TQM.jpg
  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    13/19

    The concept of TQM is closely related to the concept of quality circles which is very popular and

    also successful in Japan. Quality circles are work groups that meet frequently to study the ways

    and means to improve quality, reduce cost, eliminate wastages and solve other production

    problems. Here, employees are associated with quality, cost, efficiency, productivity, consumer

    service and satisfaction. This creates background for the concept of TQM.

    TQM aims at improving the total performance at the work place. It covers all functions, activities

    and people who are responsible for competitiveness of an Organisation. The employees are

    expected to participate not only in maintaining quality but also in improving their total

    performance so that the wastages will be avoided, production cost will go down and the

    enterprise can earn more profit.

    TQM means strategic commitment to improving quality by combining statistical quality control

    methods with a cultural commitment to seeking incremental improvements that increase

    productivity and lower costs.

    Total quality management reflects the culture of an Organisation. It indicates consumer oriented,

    quality-oriented management philosophy. It is a commitment to quality by all managers and

    workers. TQM is a philosophy for achieving customer satisfaction which involves all -

    managers, employees and users. It is management by commitment and not management bycontrol. This technique is to be introduced through quality circles. The route to TQM is through

    application of simple tools followed by Organisation change and culture change.

    Total quality management is based on the following four powerful elements:

    i. Focus on customer expectations,ii. Employees' involvement,

    iii. Mastery of processes,iv. Team work.

    9.1 Definition of TQM

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    14/19

    According to John Gilbert,

    Total Quality Management is "A process designed to focus on customer expectations, preventing

    problems, building commitment to quality in the workforce and promoting open decision-

    making."

    9.2 Origin of TQM

    1. Stress on quality management : In TQM, collective efforts are being made forimproving quality of goods and services so as to give more satisfaction to consumers.

    Quality improvement is also useful for facing market competition and for creating market

    reputation. In brief, TQM involves steps for improving quality and productivity. There is

    total commitment to quality on the part of entire Organisation. TQM covers all functions,

    activities and people who are instrumental for raising the competitiveness.

    2. Continuous process : TQM is a continuous process/activity as there is ample scope forusing new methods and techniques for improvement in the quality standards and

    performance. "Steal ideas constantly and shamelessly" is the rule in TQM.

    Implementation of innovative ideas or taking benefit of new opportunities is an integral

    aspect of TQM. In fact, TQM is a never ending quest for achieving new levels of

    performance.

    3. Stress on quality assurance system : The aim of TQM is to give maximum satisfactionto consumers by providing goods which are best in quality (zero defects). The presentISO9000 series is a set of well recognised standards for quality assurance system. The

    Japanese have been using quality assurance concepts and principles as a part of their

    TQM implementation programme even when specific name or number was not used.

    Thus, quality assurance system is an integral part of TQM.

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    15/19

    4. Linkage of quality and productivity : The TQM technique is useful for improvingquality as well as productivity. In a TQM programme, the focus is on quality

    improvement. However, such programme also raises productivity. The methods used in

    TQM programmes. E.g. stress on quality improvement, zero defects production, making

    all employees responsible for quality maintenance and improvement) are likely to bring

    quality improvement as well as yield improvement. Similarly, the TQM programme

    creates a feeling of participation among the employees. There is also positive

    improvement in the morale of employees.

    5. TQM is a gradual process : Introduction of TQM is a gradual process. It is selfimprovement and group improvement programme through team building for raising

    quality and productivity. TQM is about the gradual change of people's behavior towards

    the tasks they perform and their attitude towards other people. A mental revolution

    among the employees is required for the execution of TQM. However, such change in the

    mental make-up of managers and employees requires long period. This suggests that

    TQM is a gradual process. There are, in fact, four broad phases in the introduction of

    TQM.

    These are:

    a. Awareness Phase,b. Planning Phase,c. Implementation Phase, andd. Institutional Phase.

    6. Focus on customers : Customers are the source of all the revenue that flows through thecorporation. Their satisfaction keeps the money flowing especially in an open market

    where competitors are wooing them too. The focus of TQM is on customer satisfaction

    on quality, cost and delivery through improved orgarnisational quality of processes.

    According to British Quality Association (BQA), TQM is a corporate business

    management philosophy which recognised that customers' needs and business goals are

    inseparable.

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    16/19

    7. Employee involvement : Employees involvement is the most important recognisedfeature of TQM. In fact, quality's a team work of all employees. Their participation and

    co-operation are required to be taken at all levels. TQM is possible only through

    participative management. Under TQM, employees will be motivated to participate

    actively in the process of quality improvement through incentives and recognition of

    contribution for achieving quality standards.

    8. Formation of quality improvement teams : A cornerstone of TQM is the team buildingthat leads to commitment to improvement. Such teams include quality steering teams,

    corrective actions teams and so on. Such teams motivate employees and facilitate quality

    improvement.

    9. Management's involvement : TQM is a systems approach in managing business andimproving overall performance. It needs total commitment from the top management to

    provide viable leadership to the whole approach. Top level management has to take

    number of initiatives in order to start the process of TQM. In fact, TQM cannot have a

    good take off without total commitment of CEO and other senior executives.

    9.3 Advantages of TQM

    1. Customer satisfaction : TQM is basically for the satisfaction and welfare of customers.Needs and expectations of customers are given special attention in TQM. The attention is

    on customers and zero defect goods will be supplied to them. As a result, there will be

    reduction in the complaints of consumers/customers. TQM is not for profit-making at the

    cost of customers but it is for giving satisfaction and welfare to them.

    2. Quality improvement : One major advantage of a TQM is quality improvement at alllevels and in all activities. There is a systematic attempt to eliminate deficiencies such as

    production scrap or rework, customer complaints and material shortages. The cornerstone

    of any successful TQM system is the organised elimination of waste. The rejection rate in

    the production process will be low and this minimizes waste of materials and human

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    17/19

    efforts. Due to quality improvement, the sales and profits will also increase. The

    company will also develop goodwill and market recognition as supplier of quality goods.

    3. Absence of additional investment : One advantage of TQM is that TQM does notrequire any additional investment. It improves operational quality as well as reduces cost.

    This technique is quite convenient to developing countries which are facing financial

    difficulties due to various reasons. TQM gives many benefits but without additional

    financial burden.

    4. Raises competitiveness : TQM technique is useful for raising quality and reducing costs.This naturally raises competitiveness in the domestic as well as global markets. TQM

    technique is useful for exports by raising global competitiveness.

    5. Facilitates expansion and diversification : TQM leads to large turnover and high profitsalong with market reputation and consumer support. The company can use this profit for

    the execution of its expansion and diversification programmes. In brief, TQM facilitates

    expansion and diversification of business.

    6. Provides trained and motivated employees : TQM philosophy has its positive impacton employees. They are given proper training, monetary and non-monetary incentives,

    attractive working conditions and proper treatment. Workers take pride in manufacturing

    defect-free products.

    7. Miscellaneous Advantages : TQM technique offers other advantages as noted below:-a. Long-term consumer support,b. Prestigious position in international marketing,c. High standard of living to employees, andd. Cost control.

    10. Quality Circle (QC)

    Dewar, President of the International Association of QCs, defines QCs as "a way of capturing

    the creative and innovative power that lies within the work force".

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    18/19

    A quality circle is a small group of volunteers (usually 3 to 12 employees) doing similar work.

    They meet regularly under the leadership of their immediate supervisor, or some one chosen

    among the circle to identify problems, set priorities, discover causes and propose solutions.

    These may concern quality, productivity, safety, job structure, process flow, control mechanism,

    aesthetics of the work area etc.

    According to Maurice Alston,

    "Quality Circles are small groups of people doing similar work who, together with their

    supervisors volunteer to meet for an hour a week to study and solve work related problems which

    affect them. Circle leaders and members are trained in simple problem solving techniques which

    identify causes and develop solutions. At an appropriate time, presentations are made by thequality circles to the management who decide whether to accept, modify or decline the

    proposals".

    Quality Circle is a participative management system in which workers make suggestions and

    improvements for the betterment of organisation.

    10.1 Concept of Quality Circle

    The Quality Circle concept has three major attributes; these are :

    1. QC is a form of participative management.2. QC is a human resource development technique.3. QC is a problem solving technique.

    10.2 Objectives of Quality Circles

  • 7/30/2019 Quality Control Total Quality Management TQM Quality Circles

    19/19

    Objectives which contribute to the improvement and development of the enterprise and indirectly

    the interest of the employees are :

    1. To improve the quality and productivity and thus contribute to the improvements anddevelopment of the enterprise.

    2. To reduce the cost of products or services by waste reduction, safety, effective utilisationof resources, avoiding unnecessary errors and defects.

    3. To identify and solve work related problems that interfere with production.4. To tap the creative intelligence of the persons working in the organisation and to make

    full use of its human resources.

    5. To permit employees to develop and use greater amount of knowledge and skill andmotivate them to apply to a wide range of challenging tasks.

    6. To improve communication within the organisation.7. To increase employees' loyalty and commitment to the organisation and its goals.8. To respect humanity and build a happy bright work place environment which is

    meaningful to work in.

    9. To enrich human capability, confidence, moral, attitude and relationship.10.To satisfy the human needs of recognition, achievement and self-development.